"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
Update "git branch" that list existing branches, using the
ref-filter API that is shared with "git tag" and "git
for-each-ref".
* kn/for-each-branch:
branch: add '--points-at' option
branch.c: use 'ref-filter' APIs
branch.c: use 'ref-filter' data structures
branch: drop non-commit error reporting
branch: move 'current' check down to the presentation layer
branch: roll show_detached HEAD into regular ref_list
branch: bump get_head_description() to the top
branch: refactor width computation
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
There were some classes of errors that "git fsck" diagnosed to its
standard error that did not cause it to exit with non-zero status.
* jc/fsck-dropped-errors:
fsck: exit with non-zero when problems are found
Work around "git p4" failing when the P4 depot records the contents
in UTF-16 without UTF-16 BOM.
* ls/p4-translation-failure:
git-p4: handle "Translation of file content failed"
git-p4: add test case for "Translation of file content failed" error
The submodule code has been taught to work better with separate
work trees created via "git worktree add".
* mk/submodule-gitdir-path:
path: implement common_dir handling in git_pathdup_submodule()
submodule refactor: use strbuf_git_path_submodule() in add_submodule_odb()
The way how --ref/--notes to specify the notes tree reference are
DWIMmed was not clearly documented.
* jk/notes-dwim-doc:
notes: correct documentation of DWIMery for notes references
"git p4" learned to reencode the pathname it uses to communicate
with the p4 depot with a new option.
* ls/p4-path-encoding:
git-p4: use replacement character for non UTF-8 characters in paths
git-p4: improve path encoding verbose output
git-p4: add config git-p4.pathEncoding
Allow a later "!/abc/def" to override an earlier "/abc" that
appears in the same .gitignore file to make it easier to express
"everything in /abc directory is ignored, except for ...".
* nd/ignore-then-not-ignore:
dir.c: don't exclude whole dir prematurely if neg pattern may match
dir.c: make last_exclude_matching_from_list() run til the end
Linked checkouts are known under the name worktree, now. Rename the test
accordingly.
Specifically, this avoids the confusion that t2026 is actually not about
pruning in or with linked checkouts aka worktress but about pruning
worktrees, i.e. about "git worktree prune" rather than "git prune".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote" learned "get-url" subcommand to show the URL for a
given remote name used for fetching and pushing.
* bb/remote-get-url:
remote: add get-url subcommand
"git blame --first-parent v1.0..v2.0" was not rejected but did not
limit the blame to commits on the first parent chain.
* jk/blame-first-parent:
blame: handle --first-parent
There was no way to defeat a configured rebase.autostash variable
from the command line, as "git rebase --no-autostash" was missing.
* jk/rebase-no-autostash:
Documentation/git-rebase: fix --no-autostash formatting
rebase: support --no-autostash
The "ref-filter" code was taught about many parts of what "tag -l"
does and then "tag -l" is being reimplemented in terms of "ref-filter".
* kn/for-each-tag:
tag.c: implement '--merged' and '--no-merged' options
tag.c: implement '--format' option
tag.c: use 'ref-filter' APIs
tag.c: use 'ref-filter' data structures
ref-filter: add option to match literal pattern
ref-filter: add support to sort by version
ref-filter: add support for %(contents:lines=X)
ref-filter: add option to filter out tags, branches and remotes
ref-filter: implement an `align` atom
ref-filter: introduce match_atom_name()
ref-filter: introduce handler function for each atom
utf8: add function to align a string into given strbuf
ref-filter: introduce ref_formatting_state and ref_formatting_stack
ref-filter: move `struct atom_value` to ref-filter.c
strtoul_ui: reject negative values
Because "test_when_finished" in our test framework queues the
clean-up tasks to be done in a shell variable, it should not be
used inside a subshell. Add a mechanism to allow 'bash' to catch
such uses, and fix the ones that were found.
* jk/test-lint-forbid-when-finished-in-subshell:
test-lib-functions: detect test_when_finished in subshell
t7800: don't use test_config in a subshell
test-lib-functions: support "test_config -C <dir> ..."
t5801: don't use test_when_finished in a subshell
t7610: don't use test_config in a subshell
The ssh transport, just like any other transport over the network,
did not clear GIT_* environment variables, but it is possible to
use SendEnv and AcceptEnv to leak them to the remote invocation of
Git, which is not a good idea at all. Explicitly clear them just
like we do for the local transport.
* jk/connect-clear-env:
git_connect: clarify conn->use_shell flag
git_connect: clear GIT_* environment for ssh
"git log --date=local" used to only show the normal (default)
format in the local timezone. The command learned to take 'local'
as an instruction to use the local timezone with other formats,
e.g. "git show --date=rfc-local".
* jk/date-local:
t6300: add tests for "-local" date formats
t6300: make UTC and local dates different
date: make "local" orthogonal to date format
date: check for "local" before anything else
t6300: add test for "raw" date format
t6300: introduce test_date() helper
fast-import: switch crash-report date to iso8601
Documentation/rev-list: don't list date formats
Documentation/git-for-each-ref: don't list date formats
Documentation/config: don't list date formats
Documentation/blame-options: don't list date formats
Move the refs used during a "git bisect" session to per-worktree
hierarchy refs/worktree/* so that independent bisect sessions can
be done in different worktrees.
* dt/refs-bisection:
refs: make refs/bisect/* per-worktree
path: optimize common dir checking
refs: clean up common_list
Correct "git p4 --detect-labels" so that it does not fail to create
a tag that points at a commit that is also being imported.
* ld/p4-import-labels:
git-p4: fix P4 label import for unprocessed commits
git-p4: do not terminate creating tag for unknown commit
git-p4: failing test for ignoring invalid p4 labels
The use of 'good/bad' in "git bisect" made it confusing to use when
hunting for a state change that is not a regression (e.g. bugfix).
The command learned 'old/new' and then allows the end user to
say e.g. "bisect start --term-old=fast --term=new=slow" to find a
performance regression.
Michael's idea to make 'good/bad' more intelligent does have
certain attractiveness ($gname/272867), and makes some of the work
on this topic a moot point.
* ad/bisect-terms:
bisect: allow setting any user-specified in 'git bisect start'
bisect: add 'git bisect terms' to view the current terms
bisect: add the terms old/new
bisect: sanity check on terms
Some features from "git tag -l" and "git branch -l" have been made
available to "git for-each-ref" so that eventually the unified
implementation can be shared across all three, in a follow-up
series or two.
* kn/for-each-tag-branch:
for-each-ref: add '--contains' option
ref-filter: implement '--contains' option
parse-options.h: add macros for '--contains' option
parse-option: rename parse_opt_with_commit()
for-each-ref: add '--merged' and '--no-merged' options
ref-filter: implement '--merged' and '--no-merged' options
ref-filter: add parse_opt_merge_filter()
for-each-ref: add '--points-at' option
ref-filter: implement '--points-at' option
tag: libify parse_opt_points_at()
t6302: for-each-ref tests for ref-filter APIs
After using "git checkout --detach", the reflog is left with an entry
like
checkout: moving from ... to HEAD
This message is parsed to generate the 'HEAD detached at' message in
'git branch' and 'git status', which leads to the not-so-useful message
'HEAD detached at HEAD'.
Instead, when parsing such reflog entry, resolve HEAD to the
corresponding commit in the reflog, so that the message becomes 'HEAD
detached at $sha1'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This currently fails: the output is 'HEAD detached at HEAD'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strict mode is about not guessing where .git is. If the user points to a
.git file, we know exactly where the target .git dir will be. This makes
it possible to serve .git files as repository on the server side.
This may be needed even in local clone case because transport.c code
uses upload-pack for fetching remote refs. But right now the
clone/transport code goes with non-strict.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It matters for linked checkouts where 'refs' directory won't be
available in $GIT_DIR. is_git_directory() knows about $GIT_COMMON_DIR
and can handle this case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, libcurl will follow circular http redirects
forever. Let's put a cap on this so that somebody who can
trigger an automated fetch of an arbitrary repository (e.g.,
for CI) cannot convince git to loop infinitely.
The value chosen is 20, which is the same default that
Firefox uses.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, libcurl would follow redirection to any protocol
it was compiled for support with. This is desirable to allow
redirection from HTTP to HTTPS. However, it would even
successfully allow redirection from HTTP to SFTP, a protocol
that git does not otherwise support at all. Furthermore
git's new protocol-whitelisting could be bypassed by
following a redirect within the remote helper, as it was
only enforced at transport selection time.
This patch limits redirects within libcurl to HTTP, HTTPS,
FTP and FTPS. If there is a protocol-whitelist present, this
list is limited to those also allowed by the whitelist. As
redirection happens from within libcurl, it is impossible
for an HTTP redirect to a protocol implemented within
another remote helper.
When the curl version git was compiled with is too old to
support restrictions on protocol redirection, we warn the
user if GIT_ALLOW_PROTOCOL restrictions were requested. This
is a little inaccurate, as even without that variable in the
environment, we would still restrict SFTP, etc, and we do
not warn in that case. But anything else means we would
literally warn every time git accesses an http remote.
This commit includes a test, but it is not as robust as we
would hope. It redirects an http request to ftp, and checks
that curl complained about the protocol, which means that we
are relying on curl's specific error message to know what
happened. Ideally we would redirect to a working ftp server
and confirm that we can clone without protocol restrictions,
and not with them. But we do not have a portable way of
providing an ftp server, nor any other protocol that curl
supports (https is the closest, but we would have to deal
with certificates).
[jk: added test and version warning]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
aggregate.perl did not work when Git.pm is not installed to a directory
contained in the default Perl library path list or PERLLIB.
This commit prepends the Perl library path of the current Git source
tree to enable this.
Note that this commit adds a hard-coded relative path
use lib '../../perl/blib/lib';
instead of the flexible environment-based variant
use lib (split(/:/, $ENV{GITPERLLIB}));
which is used in tests written in Perl.
The hard-coded variant is used because the whole performance test
framework does it that way (and GITPERLLIB is not set there).
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the '--points-at' option provided by 'ref-filter'. The option lets
the user to list only branches which points at the given object.
Add documentation and tests for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'branch.c' use 'ref-filter' APIs for iterating through refs
sorting. This removes most of the code used in 'branch.c' replacing it
with calls to the 'ref-filter' library.
Make 'branch.c' use the 'filter_refs()' function provided by 'ref-filter'
to filter out tags based on the options set.
We provide a sorting option provided for 'branch.c' by using the
sorting options provided by 'ref-filter'. Also by default, we sort by
'refname'. Since 'HEAD' is alphabatically before 'refs/...' we end up
with an array consisting of the 'HEAD' ref then the local branches and
finally the remote-tracking branches.
Also remove the 'ignore' variable from ref_array_item as it was
previously used for the '--merged' option and now that is handled by
ref-filter.
Modify some of the tests in t1430 to check the stderr for a warning
regarding the broken ref. This is done as ref-filter throws a warning
for broken refs rather than directly printing them.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of log_div() appended information to the web server's
logfile to make the test more readable. However, log_div() was called
right after a request is served (which is done by git-http-backend);
the web server waits for the git-http-backend process to exit before
it writes to the log file. When the duration between serving a request
and exiting was long, the log_div() output was written before the last
request's log, and the test failed. (This duration could become
especially long for PROFILE=GEN builds.)
To get rid of this behavior, we should not change the logfile at all.
This commit removes log_div() and its calls. The additional information
is kept in the test (for readability reasons) but filtered out before
comparing it to the actual logfile.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After finding some problems (e.g. a ref refs/heads/X points at an
object that is not a commit) and issuing an error message, the
program failed to signal the fact that it found an error by a
non-zero exit status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some protocols (like git-remote-ext) can execute arbitrary
code found in the URL. The URLs that submodules use may come
from arbitrary sources (e.g., .gitmodules files in a remote
repository). Let's restrict submodules to fetching from a
known-good subset of protocols.
Note that we apply this restriction to all submodule
commands, whether the URL comes from .gitmodules or not.
This is more restrictive than we need to be; for example, in
the tests we run:
git submodule add ext::...
which should be trusted, as the URL comes directly from the
command line provided by the user. But doing it this way is
simpler, and makes it much less likely that we would miss a
case. And since such protocols should be an exception
(especially because nobody who clones from them will be able
to update the submodules!), it's not likely to inconvenience
anyone in practice.
Reported-by: Blake Burkhart <bburky@bburky.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_notes_ref is used by --ref from git-notes(1) and --notes from the
git log to find the full refname of a notes reference. Previously the
documentation of these options was not clear about what sorts of
expansions would be performed. Fix the documentation to clearly and
accurately describe the behavior of the expansions.
Add a test for this expansion when using git notes get-ref in order to
prevent future patches from changing this behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A P4 repository can get into a state where it contains a file with
type UTF-16 that does not contain a valid UTF-16 BOM. If git-p4
attempts to retrieve the file then the process crashes with a
"Translation of file content failed" error.
More info here: http://answers.perforce.com/articles/KB/3117
Fix this by detecting this error and retrieving the file as binary
instead. The result in Git is the same.
Known issue: This works only if git-p4 is executed in verbose mode.
In normal mode no exceptions are thrown and git-p4 just exits.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A P4 repository can get into a state where it contains a file with
type UTF-16 that does not contain a valid UTF-16 BOM. If git-p4
attempts to retrieve the file then the process crashes with a
"Translation of file content failed" error.
More info here: http://answers.perforce.com/articles/KB/3117
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a pattern "!foo/bar", this patch makes it not exclude "foo"
right away. This gives us a chance to examine "foo" and re-include
"foo/bar".
In order for it to detect that the directory under examination should
not be excluded right away, in other words it is a parent directory of a
negative pattern, the "directory path" of the negative pattern must be
literal. Patterns like "!f?o/bar" can't stop "foo" from being excluded.
Basename matching (i.e. "no slashes in the pattern") or must-be-dir
matching (i.e. "trailing slash in the pattern") does not work well with
this. For example, if we descend in "foo" and are examining "foo/abc",
current code for "foo/" pattern will check if path "foo/abc", not "foo",
is a directory. The same problem with basename matching. These may need
big code reorg to make it work.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expanding `insteadOf` is a part of ls-remote --url and there is no way
to expand `pushInsteadOf` as well. Add a get-url subcommand to be able
to query both as well as a way to get all configured urls.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
