Otherwise it will be split at a space after "Program" when it is set
to "\\Program Files\perl" or something silly like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a
few tests already actually use this variable when perl is needed. The
other test just call 'perl' and it might happen that the wrong perl
interpreter is used.
This becomes problematic on Windows, when the perl interpreter that is
compiled and installed on the Windows system is used, because this perl
interpreter might introduce some unexpected LF->CRLF conversions.
This patch makes sure that $PERL_PATH is used everywhere in the test suite
and that the correct perl interpreter is used.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment was introduced in b5d97e6 (pack-objects: run rev-list
equivalent internally. - 2006-09-04), stating that
git pack-objects [options] base-name <refs...>
is acceptable and refs should be passed into rev-list. But that's not
true. All arguments after base-name are ignored.
Remove the comment and reject this syntax (i.e. no more arguments after
base name)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts most of commit a2430dde8c.
That commit made the situation better for repositories with relatively
small number of objects. However with many objects and a small pack size
limit, the time required to complete the repack tends towards O(n^2),
or even much worse with long delta chains.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value passed to --max-pack-size used to count in MiB which was
inconsistent with the corresponding configuration variable as well as
other command arguments which are defined to count in bytes with an
optional unit suffix. This brings --max-pack-size in line with the
rest of Git.
Also, in order not to cause havoc with people used to the previous
megabyte scale, and because this is a sane thing to do anyway, a
minimum size of 1 MiB is enforced to avoid an explosion of pack files.
Adjust and extend test suite accordingly.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First of all, trying to run 'git verify-pack' on packs produced by
the tests using pack.packSizeLimit always failed. After lots of digging
and head scratching, it turns out that the preceeding test simulating
a SHA1 collision did leave the repository quite confused, impacting
subsequent tests.
So let's move that destructive test last, and add tests to run
verify-pack on the output from those packSizeLimit tests to catch such
goofage.
Finally, group those packSizeLimit tests together.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not have /dev/zero on Windows. This replaces it by data generated
with printf, perl, or echo. Most of the cases do not depend on that the
data is a stream of zero bytes, so we use something printable; nor is an
unlimited stream of data needed, so we produce only as many bytes as the
test cases need.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start 1.6.0.5 cycle
Fix pack.packSizeLimit and --max-pack-size handling
checkout: Fix "initial checkout" detection
Remove the period after the git-check-attr summary
Conflicts:
RelNotes
If the limit was sufficiently low, having a single object written
could bust the limit (by design), but caused the remaining allowed
size to go negative for subsequent objects, which for an unsigned
variable is a rather huge limit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ho/dashless:
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
'git foo' program identifies itself without dash in die() messages
Start conforming code to "git subcmd" style
Make sure the reason for the command failure is actually due to
the detection of SHA1 collision.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to fix verify-pack -v with multiple pack arguments.
Also, in theory, revindex data (if any) must be discarded whenever
reprepare_packed_git() is called. In practice this is hard to trigger
though.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/unpack-careful:
t5300: add test for "index-pack --strict"
receive-pack: allow using --strict mode for unpacking objects
unpack-objects: fix --strict handling
t5300: add test for "unpack-objects --strict"
unpack-objects: prevent writing of inconsistent objects
Dealing with NULs is not always safe with tr. On Solaris,
incoming NULs are silently deleted by both the System V and
UCB versions of tr. When converting to NULs, the System V
version works fine, but the UCB version silently ignores the
request to convert the character.
This patch changes all instances of tr using NULs to use
"perl -pe 'y///'" instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds test for indexing packs with --strict option, basically the same
as c0e809e (t5300: add test for "unpack-objects --strict") has done for
unpack-objects.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier attempt (which was reverted) called added_object() (by the way,
the function should be renamed to resolve_dependents() --- it is called
when we have a complete object data, and is responsible to resolve pending
deltified objects that use this object as their delta base object) without
updating obj_list[nr].sha1 with the correct value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds test for unpacking deltified objects with --strict option.
- unpacking full trees with --strict should pass;
- unpacking only trees with --strict should be rejected due to
missing blobs;
- unpacking only trees with --strict into an existing
repository with necessary blobs should succeed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" has the option --max-pack-size to limit the file
size of the packs to a certain amount of bytes. On platforms where
the pack file size is limited by filesystem constraints, it is easy
to forget this option, and this option does not exist for "git gc"
to begin with.
So introduce a config variable to set the default maximum, but make
this overrideable by the command line.
Suggested by Tor Arvid Lund.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of 'tr' only accept octal codes if entered with three digits,
and therefor misinterpret the '\0' in the test suite.
Some versions of 'tr' reject the (needless) use of character classes.
Signed-off-by: H.Merijn Brand <h.m.brand@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to spot which of the tests failed.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test 'compare delta flavors', /usr/bin/stat is used to get file size.
This isn't portable. There already is a dependency on Perl, use its '-s'
operator to get the file size.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Waaaaaaay back Git was considered to be secure as it never overwrote
an object it already had. This was ensured by always unpacking the
packfile received over the network (both in fetch and receive-pack)
and our already existing logic to not create a loose object for an
object we already have.
Lately however we keep "large-ish" packfiles on both fetch and push
by running them through index-pack instead of unpack-objects. This
would let an attacker perform a birthday attack.
How? Assume the attacker knows a SHA-1 that has two different
data streams. He knows the client is likely to have the "good"
one. So he sends the "evil" variant to the other end as part of
a "large-ish" packfile. The recipient keeps that packfile, and
indexes it. Now since this is a birthday attack there is a SHA-1
collision; two objects exist in the repository with the same SHA-1.
They have *very* different data streams. One of them is "evil".
Currently the poor recipient cannot tell the two objects apart,
short of by examining the timestamp of the packfiles. But lets
say the recipient repacks before he realizes he's been attacked.
We may wind up packing the "evil" version of the object, and deleting
the "good" one. This is made *even more likely* by Junio's recent
rearrange_packed_git patch (b867092f).
It is extremely unlikely for a SHA1 collisions to occur, but if it
ever happens with a remote (hence untrusted) object we simply must
not let the fetch succeed.
Normally received packs should not contain objects we already have.
But when they do we must ensure duplicated objects with the same SHA1
actually contain the same data.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make sure pack-objects with --delta-base-offset works fine, and that
it actually produces smaller packs as expected.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'use packed deltified objects' test was flawed as it failed to
remove the pack and index from the previous test, effectively preventing
the desired pack from being exercised as objects could be found in that
other pack instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes found that the test has 1/256 chance of falsely
producing an uncorrupted idx file, causing the check to detect
corruption fail. Now we have 1/2^160 chance of false failure
;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although pack-check.c had routine to verify the checksum for the
pack index file itself, the core did not check it before using
it.
This is stolen from the patch to tighten packname requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 797bd6f490 commit)
This patch allows the testsuite to run properly when the full path to
the git sources contains spaces or other symbols that need to be quoted.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-index-pack builds a pack index file for an existing packed
archive. With this utility a packed archive which was transferred
without the corresponding pack index can be added to objects/pack/
without repacking.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I have noticed that "make test" fails without any explanations when the
"merge" utility is missing. I don't think tests should be silent in
case of failure.
It turned out that the particular test was using "exit" to interrupt the
test in case of an error. This caused the whole test script to exit.
No further tests would be run even if "--immediate" wasn't specified.
No error message was printed.
This patch does following:
All instances of "exit", "exit 1" and "(exit 1)" in tests have been
replaced with "return 1". In fact, "(exit 1)" had no effect.
File descriptor 5 is duplicated from file descriptor 1. This is needed
to print important error messages from tests.
New function test_run_() has been introduced. Any "return" in the test
would merely cause that function to return without skipping calls to
test_failure_() and test_ok_(). The new function also traps "exit" and
treats it like a fatal error (in case somebody reintroduces "exit" in
the tests).
test_expect_failure() and test_expect_success() check both the result of
eval and the return value of test_run_(). If the later is not 0, it's
always a failure because it indicates the the test didn't complete.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes up the t/t5300 unit tests which were broken by the changes in:
Make the name of a pack-file depend on the objects packed there-in.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It now always read from standard input and rejects non-flag
arguments.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Given a list of <pack>.idx files, this command validates the
index file and the corresponding .pack file for consistency.
This patch also uses the same validation mechanism in fsck-cache
when the --full flag is used.
During normal operation, sha1_file.c verifies that a given .idx
file matches the .pack file by comparing the SHA1 checksum
stored in .idx file and .pack file as a minimum sanity check.
We may further want to check the pack signature and version when
we map the pack, but that would be a separate patch.
Earlier, errors to map a pack file was not flagged fatal but led
to a random fatal error later. This version explicitly die()s
when such an error is detected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
GIT_OBJECT_DIRECTORY and GIT_ALTERNATE_OBJECT_DIRECTORIES can
have the "pack" subdirectory that houses "packed GIT" files
produced by git-pack-objects (e.g. .git/objects/pack/foo.pack
and .git/objects/pack/foo.idx; always store them as pairs). The
following functions in sha1_file.c can then read object contents
from such packed file:
- sha1_object_info()
- has_sha1_file()
- read_sha1_file()
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This finishes the initial round of git-pack-object /
git-unpack-object pair. They are now good enough to be used as
a transport medium:
- Fix delta direction in pack-objects; the original was
computing delta to create the base object from the object to
be squashed, which was quite unfriendly for unpacker ;-).
- Add a script to test the very basics.
- Implement unpacker for both regular and deltified objects.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
