* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to be able to rewind a check-summed file to a certain
previous state after writing data into it using sha1write() API. The
fast-import command does this after streaming a blob data to the packfile
being generated and then noticing that the same blob has already been
written, and it does this with a private code truncate_pack() that is
commented as "Yes, this is a layering violation".
Introduce two API functions, sha1file_checkpoint(), that allows the caller
to save a state of a sha1file, and then later revert it to the saved state.
Use it to reimplement truncate_pack().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the bug uncovered by the tests added in the previous two patches.
When an existing notes ref was loaded into the fast-import machinery, the
num_notes counter associated with that ref remained == 0, even though the
true number of notes in the loaded ref was higher. This caused a fanout
level of 0 to be used, although the actual fanout of the tree could be > 0.
Manipulating the notes tree at an incorrect fanout level causes removals to
silently fail, and modifications of existing notes to instead produce an
additional note (leaving the old object in place at a different fanout level).
This patch fixes the bug by explicitly counting the number of notes in the
notes tree whenever it looks like the num_notes counter could be wrong (when
num_notes == 0). There may be false positives (i.e. triggering the counting
when the notes tree is truly empty), but in those cases, the counting should
not take long.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'reset' command makes fast-import start a branch from scratch. It's name
is kept in lookup table but it's sha1 is null_sha1 (special value).
'notemodify' command can be used to add a note on branch head given it's
name. lookup_branch() is used it that case and it doesn't check for
null_sha1. So fast-import writes a note for null_sha1 object instead of
giving a error.
Add a check to deny adding a note on empty branch and add a corresponding
test.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'reset' command makes fast-import start a branch from scratch. It's name
is kept in lookup table but it's sha1 is null_sha1 (special value).
'tag' command can be used to tag a branch by it's name. lookup_branch()
is used it that case and it doesn't check for null_sha1. So fast-import
writes a tag for null_sha1 object instead of giving a error.
Add a check to deny tagging an empty branch and add a corresponding test.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* di/fast-import-blob-tweak:
fast-import: treat cat-blob as a delta base hint for next blob
fast-import: count and report # of calls to diff_delta in stats
* di/fast-import-ident:
fsck: improve committer/author check
fsck: add a few committer name tests
fast-import: check committer name more strictly
fast-import: don't fail on omitted committer name
fast-import: add input format tests
fast-import allows to tag objects by sha1 and to query sha1 of objects
being imported. So it should allow to tag these objects, make it do so.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import allows to create an annotated tag that annotates a blob,
via mark or direct sha1 specification.
For mark it works, for sha1 it tries to read the object. It tries to
do so via read_sha1_file, and then checks the size to be at least 46.
That's weird, let's just allow to (annotated) tag any object referenced
by sha1. If the object originates from our packfile, we still fail though.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delta base for blobs is chosen as a previously saved blob. If we
treat cat-blob's blob as a delta base for the next blob, nothing
is likely to become worse.
For fast-import stream producer like svn-fe cat-blob is used like
following:
- svn-fe reads file delta in svn format
- to apply it, svn-fe asks cat-blob 'svn delta base'
- applies 'svn delta' to the response
- produces a blob command to store the result
Currently there is no way for svn-fe to give fast-import a hint on
object delta base. While what's requested in cat-blob is most of
the time a best delta base possible. Of course, it could be not a
good delta base, but we don't know any better one anyway.
So do treat cat-blob's result as a delta base for next blob. The
profit is nice: 2x to 7x reduction in pack size AND 1.2x to 3x
time speedup due to diff_delta being faster on good deltas. git gc
--aggressive can compress it even more, by 10% to 70%, utilizing
more cpu time, real time and 3 cpu cores.
Tested on 213M and 2.7G fast-import streams, resulting packs are 22M
and 113M, import time is 7s and 60s, both streams are produced by
svn-fe, sniffed and then used as raw input for fast-import.
For git-fast-export produced streams there is no change as it doesn't
use cat-blob and doesn't try to reorder blobs in some smart way to
make successive deltas small.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Acked-by: David Barr <davidbarr@google.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an interesting number, how often do we try to deltify each type of
objects and how often do we succeed. So do add it to stats.
Success doesn't mean much gain in pack size though. As we allow delta to
be as big as (data.len - 20). And delta close to data.len gains nothing
compared to no delta at all even after zlib compression (delta is pretty
much the same as data, just with few modifications).
We should try to make less attempts that result in huge deltas as these
consume more cpu than trivial small deltas. Either by choosing a better
delta base or reducing delta size upper bound or doing less delta attempts
at all.
Currently, delta base for blobs is a waste literally. Each blob delta
base is chosen as a previously stored blob. Disabling deltas for blobs
doesn't increase pack size and reduce import time, or at least doesn't
increase time for all fast-import streams I've tried.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Acked-by: David Barr <davidbarr@google.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To produce deltas for tree objects fast-import tracks two versions
of tree's entries - base and current one. Base version stands both
for a delta base of this tree, and for a entry inside a delta base
of a parent tree. So care should be taken to keep it in sync.
tree_content_set cuts away a whole subtree and replaces it with a
new one (or NULL for lazy load of a tree with known sha1). It
keeps a base sha1 for this subtree (needed for parent tree). And
here is the problem, 'subtree' tree root doesn't have the implied
base version entries.
Adjusting the subtree to include them would mean a deep rewrite of
subtree. Invalidating the subtree base version would mean recursive
invalidation of parents' base versions. So just mark this tree as
do-not-delta me. Abuse setuid bit for this purpose.
tree_content_replace is the same as tree_content_set except that is
is used to replace the root, so just clearing base sha1 here (instead
of setting the bit) is fine.
[di: log message]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation declares following identity format:
(<name> SP)? LT <email> GT
where name is any string without LF and LT characters.
But fast-import just accepts any string up to first GT
instead of checking the whole format, and moreover just
writes it as is to the commit object.
git-fsck checks for [^<\n]* <[^<>\n]*> format. Note that the
space is mandatory. And the space quirk is already handled via
extending the string to the left when needed.
Modify fast-import input identity format to a slightly stricter
one - deny LF, LT and GT in both <name> and <email>. And check
for it.
This is stricter then git-fsck as fsck accepts "Name> <email>"
currently, but soon fsck check will be adjusted likewise.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import format declares 'committer_name SP' to be optional in
'committer_name SP LT email GT'. But for a (commit) object SP is
obligatory while zero length committer_name is ok. git-fsck checks
that SP is present, so fast-import must prepend it if the name SP
part is omitted. It doesn't do so and thus for "LT email GT" ident
it writes a bad object.
Name cannot contain LT or GT, ident always comes after SP in fast-import.
So if ident starts with LT reuse the SP as if a valid 'SP LT email GT'
ident was passed.
This fixes a ident parsing bug for a well-formed fast-import input.
Though the parsing is still loose and can accept a ill-formed input.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
Add a 'done' command that causes fast-import to stop reading from the
stream and exit.
If the new --done command line flag was passed on the command line
(or a "feature done" declaration included at the start of the stream),
make the 'done' command mandatory. So "git fast-import --done"'s
input format will be prefix-free, making errors easier to detect when
they show up as early termination at some convenient time of the
upstream of a pipe writing to fast-import.
Another possible application of the 'done' command would to be allow a
fast-import stream that is only a small part of a larger encapsulating
stream to be easily parsed, leaving the file offset after the "done\n"
so the other application can pick up from there. This patch does not
teach fast-import to do that --- fast-import still uses buffered input
(stdio).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While refactoring the options parser in bc3c79a (fast-import: add
(non-)relative-marks feature, 2009-12-04), it was made too lenient
for options that take no argument, fix that.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fd-limit:
sha1_file.c: Don't retain open fds on small packs
mingw: add minimum getrlimit() compatibility stub
Limit file descriptors used by packs
If a pack file is small enough that its entire contents fits within
one mmap window, mmap the file and then immediately close its file
descriptor. This reduces the number of file descriptors that are
needed to read from repositories with many tiny pack files, such
as one that has received 1000 pushes (and created 1000 small pack
files) since its last repack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dereference() function to peel a tree-ish and find the underlying
tree expects arithmetic to (void *) to work on byte addresses. We
should be reading the text of objects through a char * anyway.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Adjust all callers to the API change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lazy fast-import frontend authors that want to rely on the backend to
keep track of the content of the imported trees _almost_ have what
they need in the 'cat-blob' command (v1.7.4-rc0~30^2~3, 2010-11-28).
But it is not quite enough, since
(1) cat-blob can be used to retrieve the content of files, but
not their mode, and
(2) using cat-blob requires the frontend to keep track of a name
(mark number or object id) for each blob to be retrieved
Introduce an 'ls' command to complement cat-blob and take care of the
remaining needs. The 'ls' command finds what is at a given path
within a given tree-ish (tag, commit, or tree):
'ls' SP <dataref> SP <path> LF
or in fast-import's active commit:
'ls' SP <path> LF
The response is a single line sent through the cat-blob channel,
imitating ls-tree output. So for example:
FE> ls :1 Documentation
gfi> 040000 tree 9e6c2b599341d28a2a375f8207507e0a2a627fe9 Documentation
FE> ls 9e6c2b599341d28a2a375f8207507e0a2a627fe9 git-fast-import.txt
gfi> 100644 blob 4f92954396e3f0f97e75b6838a5635b583708870 git-fast-import.txt
FE> ls :1 RelNotes
gfi> 120000 blob b942e49944 RelNotes
FE> cat-blob b942e49944
gfi> b942e49944 blob 32
gfi> Documentation/RelNotes/1.7.4.txt
The most interesting parts of the reply are the first word, which is
a 6-digit octal mode (regular file, executable, symlink, directory,
or submodule), and the part from the second space to the tab, which is
a <dataref> that can be used in later cat-blob, ls, and filemodify (M)
commands to refer to the content (blob, tree, or commit) at that path.
If there is nothing there, the response is "missing some/path".
The intent is for this command to be used to read files from the
active commit, so a frontend can apply patches to them, and to copy
files and directories from previous revisions.
For example, proposed updates to svn-fe use this command in place of
its internal representation of the repository directory structure.
This simplifies the frontend a great deal and means support for
resuming an import in a separate fast-import run (i.e., incremental
import) is basically free.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
Here is a 'feature' command for streams to use to require support for
the notemodify (N) command.
When the 'feature' facility was introduced (v1.7.0-rc0~95^2~4,
2009-12-04), the notes import feature was old news (v1.6.6-rc0~21^2~8,
2009-10-09) and it was not obvious it deserved to be a named feature.
But now that is clear, since all major non-git fast-import backends
lack support for it.
Details: on git version with this patch applied, any "feature notes"
command in the features/options section at the beginning of a stream
will be treated as a no-op. On fast-import implementations without
the feature (and older git versions), the command instead errors out
with a message like
This version of fast-import does not support feature notes.
So by declaring use of notes at the beginning of a stream, frontends
can avoid wasting time and other resources when the backend does not
support notes. (This would be especially important for backends that
do not support rewinding history after a botched import.)
Improved-by: Thomas Rast <trast@student.ethz.ch>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
Normal git processes do not allow one to build a tree with an empty
subtree entry without trying hard at it. This is in keeping with the
general UI philosophy: git tracks content, not empty directories.
v1.7.3-rc0~75^2 (2010-06-30) changed that by making it easy to include
an empty subtree in fast-import's active commit:
M 040000 4b825dc642 subdir
One can trigger this by reading an empty tree (for example, the tree
corresponding to an empty root commit) and trying to move it to a
subtree. It is better and more closely analogous to 'git read-tree
--prefix' to treat such commands as requests to remove the subtree.
Noticed-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a frontend uses a marks file to ensure its state persists between
runs, it may represent "clean slate" when bootstrapping with "no marks
yet". In such a case, feeding the last state with --import-marks and
saving the state after the current run with --export-marks would be a
natural thing to do.
The --import-marks option however errors out when the specified marks file
doesn't exist; this makes bootstrapping a bit difficult. The location of
the marks file becomes backend-dependent when --relative-marks is in
effect, and the frontend cannot check for the existence of the file in
such a case.
The --import-marks-if-exists option does the same thing as --import-marks
but does not flag an error if the named file does not exist yet to help
these frontends.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/fast-import-blob-access:
t9300: avoid short reads from dd
t9300: remove unnecessary use of /dev/stdin
fast-import: Allow cat-blob requests at arbitrary points in stream
fast-import: let importers retrieve blobs
fast-import: clarify documentation of "feature" command
fast-import: stricter parsing of integer options
Conflicts:
fast-import.c
* jj/icase-directory:
Support case folding in git fast-import when core.ignorecase=true
Support case folding for git add when core.ignorecase=true
Add case insensitivity support when using git ls-files
Add case insensitivity support for directories when using git status
Case insensitivity support for .gitignore via core.ignorecase
Add string comparison functions that respect the ignore_case variable.
Makefile & configure: add a NO_FNMATCH_CASEFOLD flag
Makefile & configure: add a NO_FNMATCH flag
Conflicts:
Makefile
config.mak.in
configure.ac
fast-import.c
The new rule: a "cat-blob" can be inserted wherever a comment is
allowed, which means at the start of any line except in the middle of
a "data" command.
This saves frontends from having to loop over everything they want to
commit in the next commit and cat-ing the necessary objects in
advance.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
