The "mailmap.file" configuration option did not support the tilde
expansion (i.e. ~user/path and ~/path).
* ow/config-mailmap-pathname:
config: respect '~' and '~user' in mailmap.file
The "%<(10,trunc)%s" pretty format specifier in the log family of
commands is used to truncate the string to a given length (e.g. 10
in the example) with padding to column-align the output, but did
not take into account that number of bytes and number of display
columns are different.
* as/pretty-truncate:
pretty.c: format string with truncate respects logOutputEncoding
t4205, t6006: add tests that fail with i18n.logOutputEncoding set
t4205 (log-pretty-format): use `tformat` rather than `format`
t4041, t4205, t6006, t7102: don't hardcode tested encoding value
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
Reworded the error message given upon a failure to open an existing
loose object file due to e.g. permission issues; it was reported as
the object being corrupt, but that is not quite true.
* jk/report-fail-to-read-objects-better:
open_sha1_file: report "most interesting" errno
Tools that read diagnostic output in our standard error stream do
not want to see terminal control sequence (e.g. erase-to-eol).
Detect them by checking if the standard error stream is connected
to a tty.
* mn/sideband-no-ansi:
sideband.c: do not use ANSI control sequence on non-terminal
We used to unconditionally disable the pager in the pager process
we spawn to feed out output, but that prevented people who want to
run "less" within "less" from doing so.
* je/pager-do-not-recurse:
pager: do allow spawning pager recursively
"Check the value of an environment and fall back to a known path
inside $GIT_DIR" is repeated a few times to determine the location
of the data store, the index and the graft file, but the return
value of getenv is not guaranteed to survive across further
invocations of setenv or even getenv.
Make sure to xstrdup() the value we receive from getenv(3), and
encapsulate the pattern into a helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mixes the "git verify-commit" tests in with the "git show
--show-signature" tests, to keep the tests more readable.
The tests already mix in the "call show" tests with the "verify" tests.
So in case of a test beakage, a '-v' run would be needed to reveal the
exact point of breakage anyway.
Additionally, test the actual output of "git verify-commit" and "git
show --show-signature" and compare to "git cat-file".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7510 uses for loops in a subshell, which need to make sure that the test
returns with the appropriate error code from within the loop.
Restructure the loops as the usual && chains with a single point of
"exit 1" at the end of the loop to make this clearer.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit signatures can be verified using "git show -s --show-signature"
or the "%G?" pretty format and parsing the output, which is well suited
for user inspection, but not for scripting.
Provide a command "verify-commit" which is analogous to "verify-tag": It
returns 0 for good signatures and non-zero otherwise, has the gpg output
on stderr and (optionally) the commit object on stdout, sans the
signature, just like "verify-tag" does.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to tag signatures, commit signatures are put into the
header, that is between the other header parts and commit messages.
Provide access to the commit content sans the signature, which is the
payload that is actually signed. Commit signature verification does the
parsing anyways, and callers may wish to act on or display the commit
object sans the signature.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The struct has been growing members whose malloced memory needs to be
freed. Do this with one helper function so that no malloced memory shall
be left unfreed.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
31b808a0 (clone --single: limit the fetch refspec to fetched branch,
2012-09-20) tried to see if the given "branch" to follow is actually
a tag at the remote repository by checking with "refs/tags/" but it
incorrectly used strstr(3); it is actively wrong to treat a "branch"
"refs/heads/refs/tags/foo" and use the logic for the "refs/tags/"
ref hierarchy. What the code really wanted to do is to see if it
starts with "refs/tags/".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/test-lazy-prereq' (early part):
t3419: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: do not chdir around in the primary test process
t3302: coding style updates
test: turn USR_BIN_TIME into a lazy prerequisite
test: turn EXPENSIVE into a lazy prerequisite
* jc/fetch-pull-refmap:
docs: Explain the purpose of fetch's and pull's <refspec> parameter.
fetch: allow explicit --refmap to override configuration
fetch doc: add a section on configured remote-tracking branches
fetch doc: remove "short-cut" section
fetch doc: update refspec format description
fetch doc: on pulling multiple refspecs
fetch doc: remove notes on outdated "mixed layout"
fetch doc: update note on '+' in front of the refspec
fetch doc: move FETCH_HEAD material lower and add an example
fetch doc: update introductory part for clarity
* mt/send-email-cover-to-cc:
t9001: avoid non-portable '\n' with sed
test/send-email: to-cover, cc-cover tests
git-send-email: two new options: to-cover, cc-cover
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
We get loose object names like "objects/??/..." from the
remote side, and need to convert them to their hex
representation.
The code to do so is rather hard to follow, as it uses some
calculated lengths whose origins are hard to understand and
verify (e.g., the path must be exactly 49 characters long.
why? Why doesn't the strcpy overflow obj_hex, which is the
same length as path?).
We can simplify this a bit by using skip_prefix, using standard
40- and 20-character buffers for hex and binary sha1s, and
adding some comments.
We also drop a totally bogus comment that claims strlcpy
cannot be used because "path" is not NUL-terminated. Right
between a call to strlen(path) and strcpy(path).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we use starts_with to check for a prefix, and
then use an already-calculated prefix length to advance a
pointer past the prefix. There are no magic numbers or
duplicated strings here, but we can still make the code
simpler and more obvious by using skip_prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After handling options, any leftover arguments should be
commands. However, we pass through "--help" and "--version",
so that we convert them into "git help" and "git version"
respectively.
This is a straightforward use of skip_prefix to avoid a
magic number, but while we are there, it is worth adding a
comment to explain this otherwise confusing behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several uses of the magic number "line+45" when
parsing ACK lines from the server, and it's rather unclear
why 45 is the correct number. We can make this more clear by
keeping a running pointer as we parse, using skip_prefix to
jump past the first "ACK ", then adding 40 to jump past
get_sha1_hex (which is still magical, but hopefully 40 is
less magical to readers of git code).
Note that this actually puts us at line+44. The original
required some character between the sha1 and further ACK
flags (it is supposed to be a space, but we never enforced
that). We start our search for flags at line+44, which
meanas we are slightly more liberal than the old code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a file change in a commit, we expect one of:
1. A mark.
2. An "inline" keyword.
3. An object sha1.
The handling of spaces is inconsistent between the three
options. Option 1 calls a sub-function which checks for the
space, but doesn't parse past it. Option 2 parses the space,
then deliberately avoids moving the pointer past it. Option
3 detects the space locally but doesn't move past it.
This is confusing, because it looks like option 1 forgets to
check for the space (it's just buried). And option 2 checks
for "inline ", but only moves strlen("inline") characters
forward, which looks like a bug but isn't.
We can make this more clear by just having each branch move
past the space as it is checked (and we can replace the
doubled use of "inline" with a call to skip_prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As in earlier commits, the diff option parser uses
starts_with to find that an argument starts with "--stat-",
and then adds strlen("stat-") to find the rest of the
option.
However, in this case the starts_with and the strlen are
separated across functions, making it easy to call the
latter without the former. Let's use skip_prefix instead of
raw pointer arithmetic to catch such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like earlier cases, we can use skip_prefix to avoid magic
numbers that must match the length of starts_with prefixes.
However, the numbers are a little more complicated here, as
we keep parsing past the prefix. We can solve it by keeping
a running pointer as we parse; its final value is the
location we want.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import does a lot of parsing of commands and
dispatching to sub-functions. For example, given "option
foo", we might recognize "option " using starts_with, and
then hand it off to parse_option() to do the rest.
However, we do not let parse_option know that we have parsed
the first part already. It gets the full buffer, and has to
skip past the uninteresting bits. Some functions simply add
a magic constant:
char *option = command_buf.buf + 7;
Others use strlen:
char *option = command_buf.buf + strlen("option ");
And others use strchr:
char *option = strchr(command_buf.buf, ' ') + 1;
All of these are brittle and easy to get wrong (especially
given that the starts_with call and the code that assumes
the presence of the prefix are far apart). Instead, we can
use skip_prefix, and just pass each handler a pointer to its
arguments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with strlen, like:
if (starts_with(foo, "bar"))
foo += strlen("bar");
This avoids magic numbers, but means we have to repeat the
string (and there is no compiler check that we didn't make a
typo in one of the strings).
We can use skip_prefix to handle this case without repeating
ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with a magic number, like:
if (starts_with(foo, "bar"))
foo += 3;
This is easy to get wrong, since you have to count the
prefix string yourself, and there's no compiler check if the
string changes. We can use skip_prefix to avoid the magic
numbers here.
Note that some of these conversions could be much shorter.
For example:
if (starts_with(arg, "--foo=")) {
bar = arg + 6;
continue;
}
could become:
if (skip_prefix(arg, "--foo=", &bar))
continue;
However, I have left it as:
if (skip_prefix(arg, "--foo=", &v)) {
bar = v;
continue;
}
to visually match nearby cases which need to actually
process the string. Like:
if (skip_prefix(arg, "--foo=", &v)) {
bar = atoi(v);
continue;
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We detect the "import-marks" capability by looking for that
string, but _without_ a trailing space. Then we skip past it
using strlen("import-marks "), with a space. So if a remote
helper gives us exactly "import-marks", we will read past
the end-of-string by one character.
This is unlikely to be a problem in practice, because such
input is malformed in the first place, and because there is
a good chance that the string has an extra NUL terminator
one character after the original (because it formerly had a
newline in it that we parsed off).
We can fix it by using skip_prefix with "import-marks ",
with the space. The other form appears to be a typo from
a515ebe (transport-helper: implement marks location as
capability, 2011-07-16); "import-marks" has never existed
without an argument, and it should match the "export-marks"
definition above.
Speaking of which, we can also use skip_prefix in a few
other places while we are in the function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import shares code between its command-line parser and
the "option" command. To do so, it strips the "--" from any
command-line options and passes them to the option parser.
However, it does not confirm that the option even begins
with "--" before blindly passing "arg + 2".
It does confirm that the option starts with "-", so the only
affected case was:
git fast-import -
which would read uninitialized memory after the argument. We
can fix it by using skip_prefix and checking the result. As
a bonus, this gets rid of some magic numbers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A submodule diff generally has content like:
-Subproject commit [0-9a-f]{40}
+Subproject commit [0-9a-f]{40}
When we are using "git apply --index" with a submodule, we
first apply the textual diff, and then parse that result to
figure out the new sha1.
If the diff has bogus input like:
-Subproject commit 1234567890123456789012345678901234567890
+bogus
we will parse the "bogus" portion. Our parser assumes that
the buffer starts with "Subproject commit", and blindly
skips past it using strlen(). This can cause us to read
random memory after the buffer.
This problem was unlikely to have come up in practice (since
it requires a malformed diff), and even when it did, we
likely noticed the problem anyway as the next operation was
to call get_sha1_hex on the random memory.
However, we can easily fix it by using skip_prefix to notice
the parsing error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the upcoming submodule test framework we often need to assert that an
empty directory exists in the work tree. Add the test_dir_is_empty()
function which asserts that the given argument is an empty directory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often represent our strings as a counted string, i.e. a pair of
the pointer to the beginning of the string and its length, and the
string may not be NUL terminated to that length.
To compare a pair of such counted strings, unpack-trees.c and
read-cache.c implement their own name_compare() functions
identically. In addition, the cache_name_compare() function in
read-cache.c is nearly identical. The only difference is when one
string is the prefix of the other string, in which case
name_compare() returns -1/+1 to show which one is longer, and
cache_name_compare() returns the difference of the lengths to show
the same information.
Unify these three functions by using the implementation from
cache_name_compare(). This does not make any difference to the
existing and future callers, as they must be paying attention only
to the sign of the returned value (and not the magnitude) because
the original implementations of these two functions return values
returned by memcmp(3) when the one string is not a prefix of the
other string, and the only thing memcmp(3) guarantees its callers is
the sign of the returned value, not the magnitude.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same_name() private function wants a quick-and-exact check to
see if they two names are byte-for-byte identical first and then
fall back to the slow path. Use memcmp(3) for the former to make it
clear that we do not want any "name" specific comparison.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merge-recursive creates a unique filename, it uses a
template like:
path~branch_%d
where the final "_%d" is filled by an incrementing counter
until we find a unique name. We allocate 8 characters for
the counter, but there is no logic to limit the size of the
integer.
Of course, this is extremely unlikely, as you would need a
hundred million collisions to trigger the problem. Even if
an attacker constructed a specialized repo, it is unlikely
that the victim would have the patience to run the merge.
However, we can make it trivially correct (and hopefully
more readable) by using a strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes allocate "msg" on the heap, but will fail to
free it if we hit the failure code path. We can instead keep
a separate variable that is safe to be freed no matter how
we get to the failure code path.
While we're here, we can also do two readability
improvements:
1. Use xstrfmt instead of a manual malloc/sprintf
2. Due to the "maybe we allocate msg, maybe we don't"
strategy, the logic for deciding which message to show
was split into two parts. Since the deallocation is now
pushed onto a separate variable, this is no longer a
concern, and we can keep all of the logic in the same
place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is shorter, and avoids a rather complicated set of
allocation and free steps.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids a manual allocation calculation, and is shorter
to boot.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is shorter, harder to get wrong, and more clearly
captures the intent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to get manual allocation calculations wrong, and
the use of strcpy/strcat raise red flags for people looking
for buffer overflows (though in this case each site was
fine).
It's also shorter to use xstrfmt, and the printf-format
tends to be easier for a reader to see what the final string
will look like.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one line shorter, and makes sure the length in the
malloc and sprintf steps match.
These conversions are very straightforward; we can drop the
malloc entirely, and replace the sprintf with xstrfmt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one line shorter, and makes sure the length in the
malloc and copy steps match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SysV-derived implementation of "echo" interprets some backslash
sequences as special instruction, e.g. "echo 'ab\c'" shows an
incomplete line with 'a' and 'b' on it. Avoid using it when showing
a path-like values in the script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>