Just return the value of the factor or zero for unrecognized strings
instead of using an output reference and a separate return value to
indicate success. This is shorter and simpler.
It basically reverts that function to before c8deb5a146 ("Improve error
messages when int/long cannot be parsed from config", 2007-12-25), while
keeping the better messages, so restore its old name, get_unit_factor(),
as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_unit_factor() multiplies the number that is passed to it with the
value of a recognized unit factor (K, M or G for 2^10, 2^20 and 2^30,
respectively). All callers pass in 1 as a number, though, which allows
them to check the actual multiplication for overflow before they are
doing it themselves.
Ignore the passed in number and don't multiply, as this feature of
parse_unit_factor() is not used anymore. Rename the output parameter to
reflect that it's not about the end result anymore, but just about the
unit factor.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_unit_factor() checks if a K, M or G is present after a number and
multiplies it by 2^10, 2^20 or 2^30, respectively. One of its callers
checks if the result is smaller than the number alone to detect
overflows. The other one passes 1 as the number and does multiplication
and overflow check itself in a similar manner.
This works, but is inconsistent, and it would break if we added support
for a bigger unit factor. E.g. 16777217T is 2^64 + 2^40, i.e. too big
for a 64-bit number. Modulo 2^64 we get 2^40 == 1TB, which is bigger
than the raw number 16777217 == 2^24 + 1, so the overflow would go
undetected by that method.
Let both callers pass 1 and handle overflow check and multiplication
themselves. Do the check before the multiplication, using
unsigned_mult_overflows, which is simpler and can deal with larger unit
factors.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `labs()` function operates, as the initial `l` suggests, on `long`
parameters. However, in `config.c` we tried to use it on values of type
`intmax_t`.
This problem was found by GCC v9.x.
To fix it, let's just "unroll" the function (i.e. negate the value if it
is negative).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
Created an even lighter version of read_early_config() that
only looks at system and global config settings. It omits
repo-local, worktree-local, and command-line settings.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialize opts structure in repo_read_config().
This change fixes a crash in later commit after a new field is added
to the structure.
In commit 3b256228a6, repo_read_config()
was added. It only initializes 3 fields in the opts structure. It is
passed to config_with_options() and then to do_git_config_sequence().
However, do_git_config_sequence() drops the opts on the floor and calls
git_config_from_file() rather than git_config_from_file_with_options(),
so that may be why this hasn't been a problem in the past.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current wildmatch() call for includeIf's gitdir pattern does not
pass the WM_PATHNAME flag. Without this flag, '*' is treated _almost_
the same as '**' (because '*' also matches slashes) with one exception:
'/**/' can match a single slash. The pattern 'foo/**/bar' matches
'foo/bar'.
But '/*/', which is essentially what wildmatch engine sees without
WM_PATHNAME, has to match two slashes (and '*' matches nothing). Which
means 'foo/*/bar' cannot match 'foo/bar'. It can only match 'foo//bar'.
The result of this is the current wildmatch() call works most of the
time until the user depends on '/**/' matching no path component. And
also '*' matches slashes while it should not, but people probably
haven't noticed this yet. The fix is straightforward.
Reported-by: Jason Karns <jason.karns@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need the contents buffer to drop a section; the parse
information in the config_store_data parameter is enough for our logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user explicitly sets
[index]
threads = true
to read the index using multiple threads, ensure that index writes
include the offset table by default to make that possible. This
ensures that the user's intent of turning on threading is respected.
In other words, permit the following configurations:
- index.threads and index.recordOffsetTable unspecified: do not write
the offset table yet (to avoid alarming the user with "ignoring IEOT
extension" messages when an older version of Git accesses the
repository) but do make use of multiple threads to read the index if
the supporting offset table is present.
This can also be requested explicitly by setting index.threads=true,
0, or >1 and index.recordOffsetTable=false.
- index.threads=false or 1: do not write the offset table, and do not
make use of the offset table.
One can set index.recordOffsetTable=false as well, to be more
explicit.
- index.threads=true, 0, or >1 and index.recordOffsetTable unspecified:
write the offset table and make use of threads at read time.
This can also be requested by setting index.threads=true, 0, >1, or
unspecified and index.recordOffsetTable=true.
Fortunately the complication is temporary: once most Git installations
have upgraded to a version with support for the IEOT and EOIE
extensions, we can flip the defaults for index.recordEndOfIndexEntries
and index.recordOffsetTable to true and eliminate the settings.
Helped-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This did happen at some stage, and was fixed relatively quickly. Make
sure that we detect very quickly, too, should that happen again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Git for Windows project, we have ample precendent for config
settings that apply to Windows, and to Windows only.
Let's formalize this concept by introducing a platform_core_config()
function that can be #define'd in a platform-specific manner.
This will allow us to contain platform-specific code better, as the
corresponding variables no longer need to be exported so that they can
be defined in environment.c and be set in config.c
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the convention elsewhere (and prepares for the case where we may
need to pass callback data).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new extension to the index file has been introduced, which allows
the file to be read in parallel.
* bp/read-cache-parallel:
read-cache: load cache entries on worker threads
ieot: add Index Entry Offset Table (IEOT) extension
read-cache: load cache extensions on a worker thread
config: add new index.threads config setting
eoie: add End of Index Entry (EOIE) extension
read-cache: clean up casting and byte decoding
read-cache.c: optimize reading index format v4
Add support for a new index.threads config setting which will be used to
control the threading code in do_read_index(). A value of 0 will tell the
index code to automatically determine the correct number of threads to use.
A value of 1 will make the code single threaded. A value greater than 1
will set the maximum number of threads to use.
For testing purposes, this setting can be overwritten by setting the
GIT_TEST_INDEX_THREADS=<n> environment variable to a value greater than 0.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename GIT_FSMONITOR_TEST to GIT_TEST_FSMONITOR for consistency with the
other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Remove the outdated instructions on how to run the test suite utilizing
fsmonitor now that it is properly documented in t/README.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
The http-backend (used for smart-http transport) used to slurp the
whole input until EOF, without paying attention to CONTENT_LENGTH
that is supplied in the environment and instead expecting the Web
server to close the input stream. This has been fixed.
* mk/http-backend-content-length:
t5562: avoid non-portable "export FOO=bar" construct
http-backend: respect CONTENT_LENGTH for receive-pack
http-backend: respect CONTENT_LENGTH as specified by rfc3875
http-backend: cleanup writing to child process
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
'branch_track' feels more closely related to branching, and it is
needed later in branch.h; rather than #include'ing cache.h in branch.h
for this small enum, just move the enum and the external declaration
for git_branch_track to branch.h.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user reported a submodule issue regarding a section mix-up,
but it could be boiled down to the following test case:
$ git init test && cd test
$ git config foo."Bar".key test
$ git config foo."bar".key test
$ tail -n 3 .git/config
[foo "Bar"]
key = test
key = test
Sub sections are case sensitive and we have a test for correctly reading
them. However we do not have a test for writing out config correctly with
case sensitive subsection names, which is why this went unnoticed in
6ae996f2ac (git_config_set: make use of the config parser's event
stream, 2018-04-09)
Unfortunately we have to make a distinction between old style configuration
that looks like
[foo.Bar]
key = test
and the new quoted style as seen above. The old style is documented as
case-agnostic, hence we need to keep 'strncasecmp'; although the
resulting setting for the old style config differs from the configuration.
That will be fixed in a follow up patch.
Reported-by: JP Sugarbroad <jpsugar@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "security fix" to pay attention to contents of ".gitmodules"
while accepting "git push" was a bit overly strict than necessary,
which has been adjusted.
* jk/fsck-gitmodules-gently:
fsck: downgrade gitmodulesParse default to "info"
fsck: split ".gitmodules too large" error from parse failure
fsck: silence stderr when parsing .gitmodules
config: add options parameter to git_config_from_mem
config: add CONFIG_ERROR_SILENT handler
config: turn die_on_error into caller-facing enum
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can already disable replace refs using a command line
option or environment variable, but those are awkward to
apply universally. Let's add a config option to do the same
thing.
That raises the question of why one might want to do so
universally. The answer is that replace refs violate the
immutability of objects. For instance, if you wanted to
cache the diff between commit XYZ and its parent, then in
theory that never changes; the hash XYZ represents the total
state. But replace refs violate that; pushing up a new ref
may create a completely new diff.
The obvious "if it hurts, don't do it" answer is not to
create replace refs if you're doing this kind of caching.
But for a site hosting arbitrary repositories, they may want
to allow users to share replace refs with each other, but
not actually respect them on the site (because the caching
is more important than the replace feature).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten the API to make it harder to misuse in-tree .gitmodules
file, even though it shares the same syntax with configuration
files, to read random configuration items from it.
* ao/config-from-gitmodules:
submodule-config: reuse config_from_gitmodules in repo_read_gitmodules
submodule-config: pass repository as argument to config_from_gitmodules
submodule-config: make 'config_from_gitmodules' private
submodule-config: add helper to get 'update-clone' config from .gitmodules
submodule-config: add helper function to get 'fetch' config from .gitmodules
config: move config_from_gitmodules to submodule-config.c
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying config parser knows how to handle a
config_options struct, but git_config_from_mem() always
passes NULL. Let's allow our callers to specify the options
struct.
We could add a "_with_options" variant, but since there are
only a handful of callers, let's just update them to pass
NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can currently die() or error(), but there's not yet any
way for callers to ask us just to quietly return an error.
Let's give them one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config code has a die_on_error flag, which lets us emit
an error() instead of dying when we see a bogus config file.
But there's no way for a caller of the config code to set
this: it's auto-set based on whether we're reading a file or
a blob.
Instead, let's add it to the config_options struct. When
it's not set (or we have no options) we'll continue to fall
back to the existing file/blob behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is not meant as a place to store arbitrary
configuration to distribute with the repository.
Move config_from_gitmodules() out of config.c and into
submodule-config.c to make it even clearer that it is not a mechanism to
retrieve arbitrary configuration from the .gitmodules file.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
http-backend reads whole input until EOF. However, the RFC 3875 specifies
that a script must read only as many bytes as specified by CONTENT_LENGTH
environment variable. Web server may exercise the specification by not closing
the script's standard input after writing content. In that case http-backend
would hang waiting for the input. The issue is known to happen with
IIS/Windows, for example.
Make http-backend read only CONTENT_LENGTH bytes, if it's defined, rather than
the whole input until EOF. If the variable is not defined, keep older behavior
of reading until EOF because it is used to support chunked transfer-encoding.
This commit only fixes buffered input, whcih reads whole body before
processign it. Non-buffered input is going to be fixed in subsequent commit.
Signed-off-by: Florian Manschwetus <manschwetus@cs-software-gmbh.de>
[mk: fixed trivial build failures and polished style issues]
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression introduced in 8462ff43 ("convert_to_git():
safe_crlf/checksafe becomes int conv_flags", 2018-01-13) back in Git
2.17 cycle caused autocrlf rewrites to produce a warning message
despite setting safecrlf=false.
Signed-off-by: Anthony Sottile <asottile@umich.edu>
Acked-By: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
