Use newly-introduced finely-grained control to teach the diff-family to
honor the new environment GIT_PRINT_SHA1_ELLIPSIS and remove the
ellipses when it is not set.
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the t4013 tests go through a list of sample command lines,
and each of them is executed and its output compared with an
expected one stored in t4013/ directory. Allow these lines to begin
with a colon followed by magic word(s) so that test conditions can
easily be tweaked.
The expected use that will happen in later steps of this is to run
tests expecting the traditional output and run the same test without
the GIT_PRINT_SHA1_ELLIPSIS=yes environment exported for (perhaps
some of) them, which will have to expect different output. Since
all of the existing tests are meant to run with the environment,
use the magic word "noellipses" to cause the variable not to be set
and exported.
As this step does not add any new test with the magic word, all
tests still run with the environment variable, expecting the
traditional output, but it will change soon.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper print_sha1_ellipsis() that pays attention to the
GIT_PRINT_SHA1_ELLIPSIS environment variable, and prepare the tests to
unconditionally set it for the test pieces that will be broken once the code
stops showing the extra dots by default.
The removal of these dots is merely a plan at this step and has not happened
yet but soon will.
Document GIT_PRINT_SHA1_ELLIPSIS.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 146fdb0dfe (diff.c: emit_diff_symbol learns about DIFF_SYMBOL_SUMMARY,
2017-06-29), the conversion from direct printing to the symbol emission
dropped the new line character for renamed, copied and rewritten files.
Add the emission of a newline, add a test for this case.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different places where the --no-abbrev option is parsed,
and two different places where SHA-1s are abbreviated. We normally parse
--no-abbrev with setup_revisions(), but in the no-index case, "git diff"
calls diff_opt_parse() directly, and diff_opt_parse() didn't handle
--no-abbrev until now. (It did handle --abbrev, however.) We normally
abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff:
handle sha1 abbreviations outside of repository, 2016-10-20) recently
introduced a special case when you run "git diff" outside of a
repository.
setup_revisions() does also call diff_opt_parse(), but not for --abbrev
or --no-abbrev, which it handles itself. setup_revisions() sets
rev_info->abbrev, and later copies that to diff_options->abbrev. It
handles --no-abbrev by setting abbrev to zero. (This change doesn't
touch that.)
Setting abbrev to zero was broken in the outside-of-a-repository special
case, which until now resulted in a truly zero-length SHA-1, rather than
taking zero to mean do not abbreviate. The only way to trigger this bug,
however, was by running "git diff --raw" without either the --abbrev or
--no-abbrev options, because 1) without --raw it doesn't respect abbrev
(which is bizarre, but has been that way forever), 2) we silently clamp
--abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until
now.
The outside-of-a-repository case is one of three no-index cases. The
other two are when one of the files you're comparing is outside of the
repository you're in, and the --no-index option.
Signed-off-by: Jack Bates <jack@nottheoilrig.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t4013: test diff-tree's --stdin commit formatting
diff-tree: avoid lookup_unknown_object
object_as_type: set commit index
alloc: factor out commit index
add object_as_type helper for casting objects
parse_object_buffer: do not set object type
move setting of object->type to alloc_* functions
alloc: write out allocator definitions
alloc.c: remove the alloc_raw_commit_node() function
Once upon a time, git-log was just "rev-list | diff-tree",
and we did not bother to test it separately. These days git-log
is implemented internally, but we want to make sure that the
rev-list to diff-tree pipeline continues to function. Let's
add a basic sanity test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These changes are in the same spirit as the six patches that
precede them, but they haven't been split into individually
justifiable patches yet.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.
Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.
Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when using --dirstat-by-file, it first does the full --dirstat
analysis (using diffcore_count_changes()), and then resets 'damage' to 1,
if any damage was found by diffcore_count_changes().
But --dirstat-by-file is not interested in the file damage per se. It only
cares if the file changed at all. In that sense it only cares if the blob
object for a file has changed. We therefore only need to compare the
object names of each file pair in the diff queue and we can skip the
entire --dirstat analysis and simply set 'damage' to 1 for each entry
where the object name has changed.
This makes --dirstat-by-file faster, and also bypasses --dirstat's practice
of ignoring rearranged lines within a file.
The patch also contains an added testcase verifying that --dirstat-by-file
now detects changes that only rearrange lines within a file.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a testcase documenting the current behavior.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --cached" (without revision) used to mean "git diff --cached
HEAD" (i.e. the user was too lazy to type HEAD). This "correctly"
failed when there was no commit yet. But was that correctness useful?
This patch changes the definition of what particular command means.
It is a request to show what _would_ be committed without further "git
add". The internal implementation is the same "git diff --cached HEAD"
when HEAD exists, but when there is no commit yet, it compares the index
with an empty tree object to achieve the desired result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given that "git show" always shows some diff and does not walk the history
by default, it is natural to expect "git show --first-parent" to show the
difference between the given commit and its first parent. It also would
be natural, given that "--cc" is the default, "git show -m" to show
pairwise difference from each of the parents.
We however always defaulted to --cc and there was no way to turn it off.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but
asking for combined patch with "show -c" didn't turn the patch output
format on; the placement of this logic in setup_revisions() dates back to
cd2bdc5 (Common option parsing for "git log --diff" and friends,
2006-04-14).
This unfortunately cannot be done as a trivial change of "if dense
combined is asked, default to patch format" done in setup_revisions() to
"if any combined is asked, default to patch format", as "diff-tree -c"
needs to default to raw, while "diff-tree --cc" needs to default to patch,
and they share the codepath. These command specific defaults are now
handled in the new "tweak" callback that can be customized by individual
command implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
There is no effect when using --numbered-files and --stdout together
without an --attach or --inline, the --numbered-files option will be
ignored. Add a test to show this.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when format-patch is used with --attach or --inline the patch
attachment has the SHA1 of the commit for its filename. This replaces
the SHA1 with the filename used by format-patch when outputting to
files.
Fix tests relying on the SHA1 output and add a test showing how the
--suffix option affects the attachment filename output.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the test case counter was incremented very late, there were a few
users of the counter had to do their own incrementing. Now we increment it
early and simplify these users.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
* tr/gcov:
Test git-patch-id
Test rev-list --parents/--children
Test log --decorate
Test fsck a bit harder
Test log --graph
Test diff --dirstat functionality
Test that diff can read from stdin
Support coverage testing with GCC/gcov
This is only a very rudimentary test, but it was untested before.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We display empty diffs for files whose timestamps have changed.
Usually, refreshing the index makes those empty diffs go away.
However, when not using the index they are not very useful and
there is no option to suppress them.
This forces on the skip_stat_unmatch option for diff --no-index,
suppressing any empty diffs. This option is also used for diffs
against the index when "diff.autorefreshindex" is set, but that
option does not apply to diff --no-index.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept -- as an "end of options" marker even when using --no-index.
Previously, the -- triggered a "normal" index/tree diff and subsequently
failed because of the unrecognized (in that mode) --no-index.
Note that the second loop can treat '--' as a normal option, because
the preceding checks ensure it is the third-to-last argument.
While at it, fix the parsing of "-q" option in --no-index mode as well.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch is most commonly used for multiple patches at once when
sending a patchset, in which case we want to number the patches; on
the other hand, single patches are not usually expected to be
numbered.
In other words, the typical behavior expected from format-patch is the
one obtained by enabling autonumber, so we set it to be the default.
Users that want to disable numbering for a particular patchset can do
so with the existing -N command-line switch. Users that want to
change the default behavior can use the format.numbering config key.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Test-updates-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the message of commit 0fe7c1de16,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --cover-letter is provided, generate a cover letter message before
the patches, numbered 0.
Original patch thanks to Johannes Schindelin
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document -<n> for git-format-patch
glossary: add 'reflog'
diff --no-index: fix --name-status with added files
Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
Without this patch, an added file would be reported as /dev/null.
Noticed by David Kastrup.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lets you use the format.subjectprefix config option to override the
default subject prefix.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testcase for format-patch --subject-prefix support.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Panagiotis Issaris reports that some MUAs seem not to like
folded "content-type" and "content-disposition" headers, so this
makes format-patch --attach output to avoid them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that "git diff" handles stdin and relative paths outside the
working tree correctly, we can convert all instances of "diff -u"
to "git diff".
This commit is really the result of
$ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
This allows one to see a root commit as a diff in commands like git-log,
git-show and git-whatchanged.
Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes one test commit in the sequence to have more than
one lines of commit log. A few output formats (--pretty=email
aka format-patch and --pretty=oneline) need to behave
differently on single and multi-line log, and this change will
help catching breakages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This way we don't have to remember to set it for each test; and
if we forget, we won't cause interactive editors to be spawned
for non-interactive tests.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
