Code refactoring.
* pw/unquote-path-in-git-pm:
t9700: add tests for Git::unquote_path()
Git::unquote_path(): throw an exception on bad path
Git::unquote_path(): handle '\a'
add -i: move unquote_path() to Git.pm
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
Code clean-up, that makes us in sync with Debian by one patch.
* jn/hooks-pre-rebase-sample-fix:
pre-rebase hook: capture documentation in a <<here document
The progress meter did not give a useful output when we haven't had
0.5 seconds to measure the throughput during the interval. Instead
show the overall throughput rate at the end, which is a much more
useful number.
* rs/progress-overall-throughput-at-the-end:
progress: show overall rate in last update
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
Code cleanup.
* rs/apply-avoid-over-reading:
apply: use strcmp(3) for comparing strings in gitdiff_verify_name()
apply: use starts_with() in gitdiff_verify_name()
If we get a repo path like "-repo.git", we may try to invoke
"git-upload-pack -repo.git". This is going to fail, since
upload-pack will interpret it as a set of bogus options. But
let's reject this before we even run the sub-program, since
we would not want to allow any mischief with repo names that
actually are real command-line options.
You can still ask for such a path via git-daemon, but there's no
security problem there, because git-daemon enters the repo itself
and then passes "." on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a GIT_PROXY_COMMAND configured, we will run it
with the host/port on the command-line. If a URL contains a
mischievous host like "--foo", we don't know how the proxy
command may handle it. It's likely to break, but it may also
do something dangerous and unwanted (technically it could
even do something useful, but that seems unlikely).
We should err on the side of caution and reject this before
we even run the command.
The hostname check matches the one we do in a similar
circumstance for ssh. The port check is not present for ssh,
but there it's not necessary because the syntax is "-p
<port>", and there's no ambiguity on the parsing side.
It's not clear whether you can actually get a negative port
to the proxy here or not. Doing:
git fetch git://remote:-1234/repo.git
keeps the "-1234" as part of the hostname, with the default
port of 9418. But it's a good idea to keep this check close
to the point of running the command to make it clear that
there's no way to circumvent it (and at worst it serves as a
belt-and-suspenders check).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We reject hostnames that start with a dash because they may
be confused for command-line options. Let's factor out that
notion into a helper function, as we'll use it in more
places. And while it's simple now, it's not clear if some
systems might need more complex logic to handle all cases.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per the explanation in the previous patch, this should be
(and is) rejected.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commands like "git fetch" talk with ssh://$rest_of_URL/, the
code splits $rest_of_URL into components like host, port, etc., and
then spawns the underlying "ssh" program by formulating argv[] array
that has:
- the path to ssh command taken from GIT_SSH_COMMAND, etc.
- dashed options like '-batch' (for Tortoise), '-p <port>' as
needed.
- ssh_host, which is supposed to be the hostname parsed out of
$rest_of_URL.
- then the command to be run on the other side, e.g. git
upload-pack.
If the ssh_host ends up getting '-<anything>', the argv[] that is
used to spawn the command becomes something like:
{ "ssh", "-p", "22", "-<anything>", "command", "to", "run", NULL }
which obviously is bogus, but depending on the actual value of
"<anything>", will make "ssh" parse and use it as an option.
Prevent this by forbidding ssh_host that begins with a "-".
Noticed-by: Joern Schneeweisz of Recurity Labs
Reported-by: Brian at GitLab
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for protocol.allow actually set that variable in
the on-disk config, run a series of tests, and then never
clean up after themselves. This means that whatever tests we
run after have protocol.allow=never, which may influence
their results.
In most cases we either exit after running these tests, or
do another round of test_proto(). In the latter case, this happens to
work because:
1. Tests of the GIT_ALLOW_PROTOCOL environment variable
override the config.
2. Tests of the specific config "protocol.foo.allow"
override the protocol.allow config.
3. The next round of protocol.allow tests start off by
setting the config to a known value.
However, it's a land-mine waiting to trap somebody adding
new tests to one of the t581x test scripts. Let's make sure
we clean up after ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1450-fsck.sh does not have a test that checks fsck's behavior when a
packfile is invalid. It does have a test for when an object in a
packfile is invalid, but in that test, the packfile itself is valid.
Add such a test.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch is read from standard input and not from a parameter.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 612c49e94d ("credential-cache: add tests for XDG
functionality", 17-03-2017), the cygwin build has been failing all the
new tests added by that commit. In particular, the 'git credential-cache
exit' command, as part of the test cleanup code, has been die-ing with
the message:
fatal: read error from cache daemon: Connection reset by peer
As this git command is part of an && chain in a 'test_when_finished'
call, the remaining test cleanup is not happening, so practically all
remaining tests fail due to the unexpected presence of various socket
files and directories.
A simple means of getting the tests to pass, is to simply ignore the
failure of 'git credential-cache exit' command and make sure all test
cleanup is done. For example, the diff for test #12 would look like:
diff --git a/t/t0301-credential-cache.sh b/t/t0301-credential-cache.sh
index fd92533ac..87e5001bb 100755
--- a/t/t0301-credential-cache.sh
+++ b/t/t0301-credential-cache.sh
@@ -17,7 +17,7 @@ helper_test cache
test_expect_success 'socket defaults to ~/.cache/git/credential/socket' '
test_when_finished "
- git credential-cache exit &&
+ (git credential-cache exit || :) &&
rmdir -p .cache/git/credential/
" &&
test_path_is_missing "$HOME/.git-credential-cache" &&
... and so on for all remaining tests. While this does indeed make all
tests pass, it is not really a solution.
As an aside, while looking to debug this issue, I added the '--debug'
option to the invocation of the 'git-credential-cache--daemon' child
process (see the spawn_daemon() function). This not only fixed the tests,
but also stopped git-credential-cache exiting with a failure. Since the
only effect of passing '--debug' was to suppress the redirection of stderr
to the bit-bucket (/dev/null), I have no idea why this seems to fix the
protocol interaction between git and git-credential-cache--daemon. (I
did think that maybe it was a timing issue, so I tried sleeping before
reading from the daemon on Linux, but that only slowed down the tests!)
All descriptions of the "Connection reset by peer" error, that I could
find, say that the peer had destroyed the connection before the client
attempted to perform I/O on the connection. Since the daemon does not
respond to an "exit" message from the client, it just closes the socket
and deletes the socket file (via the atexit handler), it seems that the
expected result is for the client to receive an EOF. Indeed, this is
exactly what seems to be happening on Linux. Also a comment in
credential-cache--daemon.c reads:
else if (!strcmp(action.buf, "exit")) {
/*
* It's important that we clean up our socket first, and then
* signal the client only once we have finished the cleanup.
* Calling exit() directly does this, because we clean up in
* our atexit() handler, and then signal the client when our
* process actually ends, which closes the socket and gives
* them EOF.
*/
exit(0);
}
On cygwin this is not the case, at least when not passing --debug to the
daemon, and the read following the "exit" gets an error with errno set
to ECONNRESET.
In order to suppress the fatal exit in this case, check the read error
for an ECONNRESET and return as if no data was read from the daemon.
This effectively converts an ECONNRESET into an EOF.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
