Some systems (like e.g. OpenSolaris) define pid_t as long,
therefore all our sprintf that use %i/%d cause a compiler warning
beacuse of the implicit long->int cast. To make sure that
we fit the limits, we display pids as PRIuMAX and cast them explicitly
to uintmax_t.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'tac' is not available everywhere, so substitute the equivalent Perl
code 'print reverse <>'. Noticed by Brian Gernhardt.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of gitattibutes and gitmodule fail to clearly
specify the name of the in tree files used. This patch brings in the
initial `.' and the fact that the `.gitmodules' file should reside at
the top-level of the working tree.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is off(0) by default, to avoid scaring people unless they asked to.
If set to a non-0 value, wait for that amount of deciseconds before
running the corrected command.
Suggested by Junio, so he has a chance to hit Ctrl-C.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a modified Damerau-Levenshtein algorithm into
Git's code base, and uses it with the following penalties to show some
similar commands when an unknown command was encountered:
swap = 0, insertion = 1, substitution = 2, deletion = 4
A typical output would now look like this:
$ git sm
git: 'sm' is not a git-command. See 'git --help'.
Did you mean one of these?
am
rm
The cut-off is at similarity rating 6, which was empirically determined
to give sensible results.
As a convenience, if there is only one candidate, Git continues under
the assumption that the user mistyped it. Example:
$ git reabse
WARNING: You called a Git program named 'reabse', which does
not exist.
Continuing under the assumption that you meant 'rebase'
[...]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a mechanical conversion of all '*.c' files with:
s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/;
The result was manually inspected and no false positive was found.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setup_git_directory() returns successfully, it is supposed to move
current working directory to worktree toplevel directory.
However, the code recomputing prefix inside setup_git_directory() has
to move cwd back to original working directory, in order to get new
prefix. After that, it should move cwd back to worktree toplevel
directory as expected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitcvs.usecrlfattr --> gitcvs.usecrlfattr::
This fixes an asciidoc markup issue.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows "git commit --author=$name" to accept a name that is not in
the required "A U Thor <author@example.xz>" format, and use that to look
up an author name that matches from existing commits.
When using this feature, it is the user's responsibility to give a name
that uniquely matches the name s/he wants, as the logic returns the name
from the first matching commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a new configuration "diff.mnemonicprefix", "git diff" shows the
differences between various combinations of preimage and postimage trees
with prefixes different from the standard "a/" and "b/". Hopefully this
will make the distinction stand out for some people.
"git diff" compares the (i)ndex and the (w)ork tree;
"git diff HEAD" compares a (c)ommit and the (w)ork tree;
"git diff --cached" compares a (c)ommit and the (i)ndex;
"git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity;
"git diff --no-index a b" compares two non-git things (1) and (2).
Because these mnemonics now have meanings, they are swapped when reverse
diff is in effect and this feature is enabled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The try_merge_strategy() function always ran the strategy in a separate
process, though this is not always necessary. The recursive and subtree
strategy can be called without a fork(). This patch adds a check, and
calls recursive in the same process without wasting resources.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it possible to avoid passing the labels of branches as
arguments to merge_recursive(), merge_trees() and
merge_recursive_generic().
It also takes care of subtree merge, output buffering, verbosity, and
rename limits - these were global variables till now in
merge-recursive.c.
A new function, named init_merge_options(), is introduced as well, it
clears the struct merge_info, then initializes with default values,
finally updates the default values based on the config and environment
variables.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_recursive_generic() takes, in comparison to to merge_recursive(),
no commit ("struct commit *") arguments but SHA ids ("unsigned char *"),
and no commit list of bases but an array of refs ("const char **").
This makes it more generic in the case that it can also take the SHA
of a tree to merge trees without commits, for the bases, the head
and the remote.
merge_recursive_generic() also handles locking and updating of the
index, which is a common use case of merge_recursive().
This patch also rewrites builtin-merge-recursive.c to make use of
merge_recursive_generic(). By doing this, I stumbled over the
limitation of 20 bases and I've added a warning if this limitation
is exceeded.
This patch qualifies make_virtual_commit() as static again because
this function is not needed anymore outside merge-recursive.c.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move most of the of code from builtin-merge-recursive.c to a new file
merge-recursive.c and introduce merge_recursive_setup() in there so that
builtin-merge-recursive and other builtins call it.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the tracked contents have CRLF line endings, colored diff output
shows "^M" at the end of output lines, which is distracting, even though
the pager we use by default ("less") knows to hide them.
The problem is that "less" hides a carriage-return only at the end of the
line, immediately before a line feed. The colored diff output does not
take this into account, and emits four element sequence for each line:
- force this color;
- the line up to but not including the terminating line feed;
- reset color
- line feed.
By including the carriage return at the end of the line in the second
item, we are breaking the smart our pager has in order not to show "^M".
This can be fixed by changing the sequence to:
- force this color;
- the line up to but not including the terminating end-of-line;
- reset color
- end-of-line.
where end-of-line is either a single linefeed or a CRLF pair. When the
output is not colored, "force this color" and "reset color" sequences are
both empty, so we won't have this problem with or without this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitattributes: -crlf is not binary
git-apply: Loosen "match_beginning" logic
Fix example in git-name-rev documentation
shell: do not play duplicated definition games to shrink the executable
Fix use of hardlinks in "make install"
pack-objects: Allow missing base objects when creating thin packs
The description of crlf attribute incorrectly said that "-crlf" means
binary. It is true that for binary files you would want "-crlf", but
that is not the same thing.
We also have supported attribute macros and via that mechanism a handy
"binary" to specify "-crlf -diff" at the same time. It was not documented
anywhere as far as I can tell, even though the support was there from
the very beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-checkout to recreate a merge out of unmerged
index entries while resolving conflicts.
With this patch, checking out an unmerged path from the index
now have the following possibilities:
* Without any option, an attempt to checkout an unmerged path
will atomically fail (i.e. no other cleanly-merged paths are
checked out either);
* With "-f", other cleanly-merged paths are checked out, and
unmerged paths are ignored;
* With "--ours" or "--theirs, the contents from the specified
stage is checked out;
* With "-m" (we should add "--merge" as synonym), the 3-way merge
is recreated from the staged object names and checked out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-checkout-fix:
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
checkout: do not check out unmerged higher stages randomly
This teaches the low-level ll_xdl_merge() routine to honor
merge.conflictstyle configuration variable, so that merge-recursive
strategy can show the conflicts in the style of user's choice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "git merge-file" to honor merge.conflictstyle configuration
variable, whose value can be "merge" (default) or "diff3".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches rerere to grok conflicts expressed in "diff3 -m" style
output, where the version from the common ancestor is output after the
first side, preceded by a "|||||||" line.
The rerere database needs to keep only the versions from two sides, so the
code parses the original copy and discards it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These hardcoded integers make the code harder to follow than necessary;
replace them with enums to make it easier to read, before adding support
for optionally parsing "diff3 -m" style conflict markers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing a conflicting merge result, and "--diff3 -m" style is asked
for, this patch makes sure that the merge reduction level does not exceed
XDL_MERGE_EAGER. This is because "diff3 -m" style output would not make
sense for anything more aggressive than XDL_MERGE_EAGER, because of the
way how the merge reduction works.
"git merge-file" no longer has to force MERGE_EAGER when "--diff3" is
asked for because of this change.
Suppose a common ancestor (shared preimage) is modified to postimage #1
and #2 (each letter represents one line):
#####
postimage#1: 1234ABCDE789
| /
| /
preimage: 123456789
| \
postimage#2: 1234AXYE789
####
XDL_MERGE_MINIMAL and XDL_MERGE_EAGER would:
(1) find the s/56/ABCDE/ done on one side and s/56/AXYE/ done on the
other side,
(2) notice that they touch an overlapping area, and
(3) mark it as a conflict, "ABCDE vs AXYE".
The difference between the two algorithms is that EAGER drops the hunk
altogether if the postimages match (i.e. both sides modified the same
way), while MINIMAL keeps it. There is no other operation performed to
the hunk. As the result, lines marked with "#" in the above picure will
be in the RCS merge style output like this (letters <, = and > represent
conflict marker lines):
output: 1234<ABCDE=AXYE>789 ; with MINIMAL/EAGER
The part from the preimage that corresponds to these conflicting changes
is "56", which is what "diff3 -m" style output adds to it:
output: 1234<ABCDE|56=AXYE>789 ; in "diff3 -m" style
Now, XDL_MERGE_ZEALOUS looks at the differences between the changes two
postimages made in order to reduce the number of lines in the conflicting
regions. It notices that both sides start their new contents with "A",
and excludes it from the output (it also excludes "E" for the same
reason). The conflict that used to be "ABCDE vs AXYE" is now "BCD vs XY":
output: 1234A<BCD=XY>E789 ; with ZEALOUS
There could even be matching parts between two postimages in the middle.
Instead of one side rewriting the shared "56" to "ABCDE" and the other
side to "AXYE", imagine the case where the postimages are "ABCDE" and
"AXCYE", in which case instead of having one conflicted hunk "BCD vs XY",
you would have two conflicting hunks "B vs X" and "D vs Y".
In either case, once you reduce "ABCDE vs AXYE" to "BCD vs XY" (or "ABCDE
vs AXCYE" to "B vs X" and "D vs Y"), there is no part from the preimage
that corresponds to the conflicting change made in both postimages
anymore. In other words, conflict reduced by ZEALOUS algorithm cannot be
expressed in "diff3 -m" style. Representing the last illustration like
this is misleading to say the least:
output: 1234A<BCD|56=XY>E789 ; broken "diff3 -m" style
because the preimage was not ...4A56E... to begin with. "A" and "E" are
common only between the postimages.
Even worse, once a single conflicting hunk is split into multiple ones
(recall the example of breaking "ABCDE vs AXCYE" to "B vs X" and "D vs
Y"), there is no sane way to distribute the preimage text across split
conflicting hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces hardcoded magic constants with symbolic ones for
readability, and swaps one if/else blocks to better match the
order in which 0/1/2 variables are handled to nearby codepath.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing conflicting merges, we traditionally followed RCS's merge
output format. The output shows:
<<<<<<<
postimage from one side;
=======
postimage of the other side; and
>>>>>>>
Some poeple find it easier to be able to understand what is going on when
they can view the common ancestor's version, which is used by "diff3 -m",
which shows:
<<<<<<<
postimage from one side;
|||||||
shared preimage;
=======
postimage of the other side; and
>>>>>>>
This is an initial step to bring that as an optional feature to git.
Only "git merge-file" has been converted, with "--diff3" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simply moves code around to make a separate function that prepares
a single conflicted hunk with markers into the buffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets you to check out 'our' (or 'their') version of an
unmerged path out of the index while resolving conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we made "git checkout $pathspec" to atomically refuse
the operation of $pathspec matched any path with unmerged
stages. This patch allows:
$ git checkout -f a b c
to ignore, instead of error out on, such unmerged paths. The
fix to prevent checkout of an unmerged path from random stages
is still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a conflicted merge when you have unmerged stages for a
path F in the index, if you said:
$ git checkout F
we rewrote F as many times as we have stages for it, and the
last one (typically "theirs") was left in the work tree, without
resolving the conflict.
This fixes it by noticing that a specified pathspec pattern
matches an unmerged path, and by erroring out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/post-simplify' (early part):
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even after a handfle attempts, match_beginning logic still has corner
cases:
1bf1a85 (apply: treat EOF as proper context., 2006-05-23)
65aadb9 (apply: force matching at the beginning., 2006-05-24)
4be6096 (apply --unidiff-zero: loosen sanity checks ..., 2006-09-17)
ee5a317 (Fix "git apply" to correctly enforce "match ..., 2008-04-06)
This is a tricky piece of code.
We still incorrectly enforce "match_beginning" for -U0 matches.
I noticed this while trying out an example sequence from Clemens Buchacher:
$ echo a >victim
$ git add victim
$ echo b >>victim
$ git diff -U0 >patch
$ cat patch
diff --git i/victim w/victim
index 7898192..422c2b7 100644
--- i/victim
+++ w/victim
@@ -1,0 +2 @@ a
+b
$ git apply --cached --unidiff-zero <patch
$ git show :victim
b
a
The change inserts a new line before the second line, but we insist it to
be applied at the beginning. As the result, the code refuses to apply it
at the original offset, and we end up adding the line at the beginning.
Updates to the test script are by Clemens Buchacher.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 59d3f54 (name-rev: avoid "^0" when unneeded, 2007-02-20), name-rev
stopped showing an unnecessary "^0" to dereference a tag down to a commit.
The patch should have made a matching update to the documentation, but we
forgot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Playing with linker games to shrink git-shell did not go well with various
other platforms and compilers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code failed to filter-out git-add properly on platforms were $X is
not empty (ATM there is only one such a platform).
Than it tried to create a hardlink to the file ($execdir/git-add) it just
removed (because git-add is first in the BUILT_INS), so ln failed (but
because stderr was redirected into /dev/null the error was never seen), and
the whole install ended up using "ln -s" instead.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--reverse did not interact well with --parents, as the included test
case shows: in a history like
A--B.
\ \
`C--M--D
the command
git rev-list --reverse --parents --full-history HEAD
erroneously lists D as having no parents at all. (Without --reverse,
it correctly lists M.)
This is caused by the machinery driving --reverse: it first grabs all
commits through the normal routines, then runs them through the same
routines again, effectively simplifying them twice.
Fix this by moving the --reverse one level up, into get_revision().
This way we can cleanly grab all commits via the normal calls, then
just pop them off the list one by one without interfering with
get_revision_internal().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It should be more efficient to use nicely aligned buffer sizes, either
for filesystem operations or SHA1 checksums. Also, using a relatively
small nominal size might allow for the data to remain in L1 cache
between both SHA1_Update() calls.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When completing a thin pack, a new header has to be written to
the pack and a new SHA1 computed. Make sure that the SHA1 of what
is being read back matches the SHA1 of what was written for both:
the original pack and the appended objects.
To do so, a couple write_or_die() calls were converted to sha1write()
which has the advantage of doing some buffering as well as handling
SHA1 and CRC32 checksum already.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When limiting the pack size, a new header has to be written to the
pack and a new SHA1 computed. Make sure that the SHA1 of what is being
read back matches the SHA1 of what was written.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, this function has the potential to read corrupted pack data
from disk and give it a valid SHA1 checksum. Let's add the ability to
validate SHA1 checksum of existing data along the way, including before
and after any arbitrary point in the pack.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function returns 0 when the current object couldn't be written
due to the pack size limit, otherwise the current offset in the pack.
There is a problem with this approach however, since current object
could be a delta and its delta base might just have been written in
the same write_one() call, but those successfully written objects are
not accounted in the offset variable tracked by the caller. Currently
this is not an issue but a subsequent patch will need this.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
