Currently rerere can't handle nested conflicts and will error out when
it encounters such conflicts. Do that by recursively calling the
'handle_conflict' function to normalize the conflict.
Note that a conflict like this would only be produced if a user
commits a file with conflict markers, and gets a conflict including
that in a susbsequent operation.
The conflict ID calculation here deserves some explanation:
As we are using the same handle_conflict function, the nested conflict
is normalized the same way as for non-nested conflicts, which means
the ancestor in the diff3 case is stripped out, and the parts of the
conflict are ordered alphabetically.
The conflict ID is however is only calculated in the top level
handle_conflict call, so it will include the markers that 'rerere'
adds to the output. e.g. say there's the following conflict:
<<<<<<< HEAD
1
=======
<<<<<<< HEAD
3
=======
2
>>>>>>> branch-2
>>>>>>> branch-3~
it would be recorde as follows in the preimage:
<<<<<<<
1
=======
<<<<<<<
2
=======
3
>>>>>>>
>>>>>>>
and the conflict ID would be calculated as
sha1(1<NUL><<<<<<<
2
=======
3
>>>>>>><NUL>)
Stripping out vs. leaving the conflict markers in place in the inner
conflict should have no practical impact, but it simplifies the
implementation.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we write the conflict to disk directly in the handle_path
function. To make it re-usable for nested conflicts, instead of
writing the conflict out directly, store it in a strbuf and let the
caller write it out.
This does mean some slight increase in memory usage, however that
increase is limited to the size of the largest conflict we've
currently processed. We already keep one copy of the conflict in
memory, and it shouldn't be too large, so the increase in memory usage
seems acceptable.
As a bonus this lets us get replace the rerere_io_putconflict function
with a trivial two line function.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the handle_conflict function, which handles a single
conflict in a path. This is in preparation for a subsequent commit,
where this function will be re-used.
Note that this does change the behaviour of 'git rerere' slightly.
Where previously we'd consider all files where an unmatched conflict
marker is found as invalid, we now only consider files invalid when
the "ours" conflict marker ("<<<<<<< <text>") is unmatched, not when
other conflict markers (e.g. "=======") is unmatched.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently return the exact number of conflict hunks a certain path
has from the 'handle_paths' function. However all of its callers only
care whether there are conflicts or not or if there is an error.
Return only that information, and document that only that information
is returned. This will simplify the code in the subsequent steps.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when a user does a conflict resolution and ends it (in any
way that calls 'git rerere' again) with a file 'rerere' can't handle,
subsequent rerere operations that are interested in that path, such as
'rerere clear' or 'rerere forget <path>' will fail, or even worse in
the case of 'rerere clear' segfault.
Such states include nested conflicts, or a conflict marker that
doesn't have any match.
This is because 'git rerere' calculates a conflict file and writes it
to the MERGE_RR file. When the user then changes the file in any way
rerere can't handle, and then calls 'git rerere' on it again to record
the conflict resolution, the handle_file function fails, and removes
the 'preimage' file in the rr-cache in the process, while leaving the
ID in the MERGE_RR file.
Now when 'rerere clear' is run, it reads the ID from the MERGE_RR
file, however the 'fit_variant' function for the ID is never called as
the 'preimage' file does not exist anymore. This means
'collection->status' in 'has_rerere_resolution' is NULL, and the
command will crash.
To fix this, remove the rerere ID from the MERGE_RR file in the case
when we can't handle it, just after the 'preimage' file was removed
and remove the corresponding variant from .git/rr-cache/. Removing it
unconditionally is fine here, because if the user would have resolved
the conflict and ran rerere, the entry would no longer be in the
MERGE_RR file, so we wouldn't have this problem in the first place,
while if the conflict was not resolved.
Currently there is nothing left in this folder, as the 'preimage'
was already deleted by the 'handle_file' function, so 'remove_variant'
is a no-op. Still call the function, to make sure we clean everything
up, in case we add some other files corresponding to a variant in the
future.
Note that other variants that have the same conflict ID will not be
touched.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some documentation for the logic behind the conflict normalization
in rerere.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rerere' is considered a porcelain command and as such its output
should be translated. Its functionality is also only enabled through
a config setting, so scripts really shouldn't rely on the output
either way.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --exec option's implementation is not really well-prepared for
--rebase-merges. Demonstrate this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests for "git am --[no-]scissors" [1] work in the following way:
1. Create files with commit messages
2. Use these files to create expected commits
3. Generate eml file with patch from expected commits
4. Create commits using git am with these eml files
5. Compare these commits with expected
The test for "git am --scissors" is supposed to take an e-mail with a
scissors line and in-body "Subject:" header and demonstrate that the
subject line from the e-mail itself is overridden by the in-body header
and that only text below the scissors line is included in the commit
message of the commit created by the invocation of "git am --scissors".
However, the setup of the test incorrectly uses a commit without the
scissors line and without the in-body header in the commit message,
producing eml file not suitable for testing of "git am --scissors".
This can be checked by intentionally breaking is_scissors_line function
in mailinfo.c, for example, by changing string ">8", which is used by
the test. With such change the test should fail, but does not.
Fix broken test by generating eml file with scissors line and in-body
header "Subject:". Since the two tests for --scissors and --no-scissors
options are there to test cutting or keeping the commit message, update
both tests to change the test file in the same way, which allows us to
generate only one eml file to be passed to git am. To clarify the
intention of the test, give files and tags more explicit names.
[1]: introduced in bf72ac17d (t4150: tests for am --[no-]scissors,
2015-07-19)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows' original 4aa8b8c8283 (Teach 'git pull' to handle
--rebase=interactive, 2011-10-21) had support for the very convenient
abbreviation
git pull --rebase=i
which was later lost when it was ported to the builtin `git pull`, and
it was not introduced before the patch eventually made it into Git as
f5eb87b98d (pull: allow interactive rebase with --rebase=interactive,
2016-01-13).
However, it is *really* a useful short hand for the occasional rebasing
pull on branches that do not usually want to be rebased.
So let's reintroduce this convenience, at long last.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making a change to the documentation, it's easy to
forget to check the rendered version to make sure it was
formatted as you intended. And simply doing a diff between
the two built versions is less trivial than you might hope:
- diffing the roff or html output isn't particularly
readable; what we really care about is what the end user
will see
- you have to tweak a few build variables to avoid
spurious differences (e.g., version numbers, build
times)
Let's provide a script that builds and installs the manpages
for two commits, renders the results using "man", and diffs
the result. Since this is time-consuming, we'll also do our
best to avoid repeated work, keeping intermediate results
between runs.
Some of this could probably be made a little less ugly if we
built support into Documentation/Makefile. But by relying
only on "make install-man" working, this script should work
for generating a diff between any two versions, whether they
include this script or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The color group in config.txt is actually sorted but changes in
sb/blame-color broke this. Reorder color.blame.* and move
blame.coloring back to the rest of blame.* (and reorder that group too
while we're there)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test description looks like it was written with the originally
observed behavior ("causes segfault") rather than the desired and now
current behavior ("does not cause segfault"). Fix it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The information that is printed for update_submodules in
'submodule--helper update-clone' and consumed by 'git submodule update'
is stored as a string per submodule. This made sense at the time of
48308681b0 (git submodule update: have a dedicated helper for cloning,
2016-02-29), but as we want to migrate the rest of the submodule update
into C, we're better off having access to the raw information in a helper
struct.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the command line parsing from the actual execution of the command
within the repository. For now there is not a lot of execution as
most of it is still in git-submodule.sh.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'mode' variable is not used in cmd_update for its original purpose,
rename it to 'dummy' as it only serves the purpose to abort quickly
documenting this knowledge.
The variable 'stage' is also not used any more in cmd_update, so remove it.
This went unnoticed as first each function used the commonly used
submodule listing, which was converted in 74703a1e4d (submodule: rewrite
`module_list` shell function in C, 2015-09-02). When cmd_update was
using its own function starting in 48308681b0 (git submodule update:
have a dedicated helper for cloning, 2016-02-29), its removal was missed.
A later patch in this series also touches the communication between
the submodule helper and git-submodule.sh, but let's have this as
a preparatory patch, as it eases the next patch, which stores the
raw data instead of the line printed for this communication.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other error messages in cmd_update are reporting the submodule based
on its path, so let's do that for invalid update modes, too.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
want_color_fd() is designed to work only with standard output and
error file descriptors and stores information about each descriptor in
an array. However, it doesn't verify that the passed-in descriptor
lives within that set, which, with a buggy caller, could lead to
access or assignment outside the array bounds.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parseopt wraps argument help strings in a pair of angular brackets by
default, to tell users that they need to replace it with an actual
value. This is useful in most cases, because most option arguments
are indeed single values of a certain type. The option
PARSE_OPT_LITERAL_ARGHELP needs to be used in option definitions with
arguments that have multiple parts or are literal strings.
Stop adding these angular brackets if special characters are present,
as they indicate that we don't deal with a simple placeholder. This
simplifies the code a bit and makes defining special options slightly
easier.
Remove the flag PARSE_OPT_LITERAL_ARGHELP in the cases where the new
and more cautious handling suffices.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap the placeholders in the option help string for -w in pairs of
angular brackets to document that users need to replace them with actual
numbers. Use the flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt
from adding another pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap each part of the argument help string in angular brackets to show
that users need to replace them with actual values. Do that explicitly
to balance the pairs nicely in the code and avoid confusing casual
readers. Add the flag PARSE_OPT_LITERAL_ARGHELP to keep parseopt from
adding another pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap both placeholders in the argument help string in angular brackets
to signal that users needs replace them with some actual value. Use the
flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt from adding another
pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parseopt wraps arguments in a pair of angular brackets by default,
signifying that the user needs to replace it with a value of the
documented type. Remove the pairs from the option definitions to
duplication and confusion.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't translate the argument specification for --chmod; "+x" and "-x"
are the literal strings that the commands accept.
Separate alternatives using a pipe character instead of a slash, for
consistency.
Use the flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt from adding a
pair of angular brackets around the argument help string, as that would
wrongly indicate that users need to replace the literal strings with
some kind of value.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option help text for the force-with-lease option to "git push"
reads like this:
$ git push -h 2>&1 | grep -e force-with-lease
--force-with-lease[=<refname>:<expect>]
which comes from having N_("refname>:<expect") as the argument help
text in the source code, with an aparent lack of "<" and ">" at both
ends.
It turns out that parse-options machinery takes the whole string and
encloses it inside a pair of "<>", to make it easier for majority
cases that uses a single token placeholder.
The help string was written in a funnily unbalanced way knowing that
the end result would balance out, by somebody who forgot the
presence of PARSE_OPT_LITERAL_ARGHELP, which is the escape hatch
mechanism designed to help such a case. We just should use the
official escape hatch instead.
Because ":<expect>" part can be omitted to ask Git to guess, it may
be more correct to spell it as "<refname>[:<expect>]", but that is
not the focus of this topic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Look for broken "&&" chains that are hidden in subshell, many of
which have been found and corrected.
* es/chain-lint-in-subshell:
t/chainlint.sed: drop extra spaces from regex character class
t/chainlint: add chainlint "specialized" test cases
t/chainlint: add chainlint "complex" test cases
t/chainlint: add chainlint "cuddled" test cases
t/chainlint: add chainlint "loop" and "conditional" test cases
t/chainlint: add chainlint "nested subshell" test cases
t/chainlint: add chainlint "one-liner" test cases
t/chainlint: add chainlint "whitespace" test cases
t/chainlint: add chainlint "basic" test cases
t/Makefile: add machinery to check correctness of chainlint.sed
t/test-lib: teach --chain-lint to detect broken &&-chains in subshells
The lazy clone support had a few places where missing but promised
objects were not correctly tolerated, which have been fixed.
* jt/tags-to-promised-blobs-fix:
tag: don't warn if target is missing but promised
revision: tolerate promised targets of tags
Add a server-side knob to skip commits in exponential/fibbonacci
stride in an attempt to cover wider swath of history with a smaller
number of iterations, potentially accepting a larger packfile
transfer, instead of going back one commit a time during common
ancestor discovery during the "git fetch" transaction.
* jt/fetch-negotiator-skipping:
negotiator/skipping: skip commits during fetch
"git send-email" when using in a batched mode that limits the
number of messages sent in a single SMTP session lost the contents
of the variable used to choose between tls/ssl, unable to send the
second and later batches, which has been fixed.
* jm/send-email-tls-auth-on-batch:
send-email: fix tls AUTH when sending batch
"git rebase" started exporting GIT_DIR environment variable and
exposing it to hook scripts when part of it got rewritten in C.
Instead of matching the old scripted Porcelains' behaviour,
compensate by also exporting GIT_WORK_TREE environment as well to
lessen the damage. This can harm existing hooks that want to
operate on different repository, but the current behaviour is
already broken for them anyway.
* bc/sequencer-export-work-tree-as-well:
sequencer: pass absolute GIT_WORK_TREE to exec commands
Tests to cover conflict cases that involve submodules have been
added for merge-recursive.
* en/t7405-recursive-submodule-conflicts:
t7405: verify 'merge --abort' works after submodule/path conflicts
t7405: add a directory/submodule conflict
t7405: add a file/submodule conflict
Tests to cover various conflicting cases have been added for
merge-recursive.
* en/t6036-merge-recursive-tests:
t6036: add a failed conflict detection case: regular files, different modes
t6036: add a failed conflict detection case with conflicting types
t6036: add a failed conflict detection case with submodule add/add
t6036: add a failed conflict detection case with submodule modify/modify
t6036: add a failed conflict detection case with symlink add/add
t6036: add a failed conflict detection case with symlink modify/modify
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
