The hg_log() test helper uses the "--graph" parameter that is
implemented by the GraphLog extension. If the extension is not activated
by the user, the parameter is not available. Activate the extension in
setup().
Also changes the way we grep the output in hg_log(). The pipe operator
can hide the return code of hg command. As a matter of fact, if log
fails because it doesn't know about "--graph", it doesn't report any
failure and let's you think everything worked.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial allows absolute file paths, and Git doesn't like that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem reportedly happened after doing a push that fails, the abort
causes the state of remote-hg to go bad, this happens because
remote-hg's marks are not stored, but 'git fast-export' marks are.
Ensure that the marks are _always_ stored.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If set to true acts as hg's clone/pull --insecure option.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning or pushing fails, we don't want to show a stack-trace.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we shouldn't do this, as it's not recommended in mercurial
documentation, but there's no other way to push multiple bookmarks (on
the same branch), which would be the behavior most similar to git.
At the same time, add a configuration option for the people that don't
want to risk creating new remote heads.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial emits messages like "searching for changes", "no changes
found", etc. meant for the use of its own UI layer, which break the pipe
between transport helper and remote helper.
Since there's no way to silence Mercurial, let's redirect to standard
error.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the maximum number of splits to make when dividing the diff stat
lines based on space characters.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revision_history() is deprecated and doesn't do what we want (revno
instead of dotted_revno?).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patches didn't deal with all the scenarios.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-helpers-test-updates:
remote-hg: fix hg-git test-case
remote-bzr: remove stale check code for tests
remote-helpers: fix the run of all tests
remote-bzr: avoid echo -n
Using grep "devel\s\+3:" to find at least one whitspace is not
portable on all grep versions; not all grep versions understand "\s"
as a "whitespace".
Use a literal TAB followed by SPACE.
The + as a qualifier for "one or more" is not a basic regular
expression; use egrep instead of grep.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They have no content, there's nothing we can do with them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently, that's the only way it's possible.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow re-add of a deleted file in the same commit.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git does not handle directories, renaming a directory is renaming every
files in this directory.
[fc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was some lingering code that shouldn't have been there in the
first place.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fastimport plugin was only required in the early stage of
development.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to check for duplicate test numbers, we don't have them,
and either way test-lint-duplicates doesn't work in this situation.
Also, while we are on it, enable test-lint-shell-syntax to check for sh
errors.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not portable, as reported by test-lint.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt string generator did not notice when we are in a middle
of a "git revert" session.
* rr/prompt-revert-head:
bash: teach __git_ps1 about REVERT_HEAD
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
A new read-only credential helper (in contrib/) to interact with
the .netrc/.authinfo files. Hopefully mn/send-email-authinfo topic
can rebuild on top of something like this.
* tz/credential-authinfo:
Add contrib/credentials/netrc with GPG support
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
A recent change added functions whose entire standard error stream
is redirected to /dev/null using a construct that is valid POSIX.1
but is not widely used:
funcname () {
cd "$1" && run some command "$2"
} 2>/dev/null
Even though this file is "git-completion.bash", zsh completion
support dot-sources it (instead of asking bash to grok it like tcsh
completion does), and zsh does not implement this redirection
correctly.
With zsh, trying to complete an inexistant directory gave this:
git add no-such-dir/__git_ls_files_helper💿2: no such file or directory: no-such-dir/
Also these functions use "cd" to first go somewhere else before
running a command, but the location the caller wants them to go that
is given as an argument to them should not be affected by CDPATH
variable the users may have set for their interactive session.
To fix both of these, wrap the body of the function in a subshell,
unset CDPATH at the beginning of the subshell, and redirect the
standard error stream of the subshell to /dev/null.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fea16b47b6 (Fri Jan 11 19:48:43 2013, Manlio Perillo,
git-completion.bash: add support for path completion), introduced a new
__gitcomp_file function that uses the bash builtin "compgen". The
function was redefined for ZSH in the deprecated section of
git-completion.bash, but not in the new git-completion.zsh script.
As a result, users of git-completion.zsh trying to complete "git add
fo<tab>" get an error:
git add fo__gitcomp_file:8: command not found: compgen
This patch adds the redefinition and removes the error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git submodule init" the user is able to tell git he cares about one
or more submodules and wants to have it populated on the next call to "git
submodule update". But currently there is no easy way he could tell git he
does not care about a submodule anymore and wants to get rid of his local
work tree (except he knows a lot about submodule internals and removes the
"submodule.$name.url" setting from .git/config together with the work tree
himself).
Help those users by providing a 'deinit' command. This removes the
whole submodule.<name> section from .git/config (either for the given
submodule(s) or for all those which have been initialized if '.' is used)
together with their work tree. Fail if the current work tree contains
modifications (unless forced), but don't complain when either the work
tree is already removed or no settings are found in .git/config.
Add tests and link the man pages of "git submodule deinit" and "git rm"
to assist the user in deciding whether removing or unregistering the
submodule is the right thing to do for him. Also add the deinit subcommand
to the completion list.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On WinXP, the windows credential helper doesn't work at all (due to missing
Cred[Un]PackAuthenticationBuffer APIs). On Win7, the credential format used
by wincred is incompatible with native Windows tools (such as the control
panel applet or 'cmdkey.exe /generic'). These Windows tools only set the
TargetName, UserName and CredentialBlob members of the CREDENTIAL
structure (where CredentialBlob is the UTF-16-encoded password).
Remove the unnecessary packing / unpacking of the password, along with the
related API definitions, for compatibility with Windows XP.
Don't use CREDENTIAL_ATTRIBUTEs to identify credentials for compatibility
with Windows credential manager tools. Parse the protocol, username, host
and path fields from the credential's target name instead.
Credentials created with an old wincred version will have mangled or empty
passwords after this change.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
The windows credential helper currently only accepts LF on stdin, but bash
and cmd.exe both send CRLF. This prevents interactive use in the console.
Change the stdin parser to optionally accept CRLF.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
This credential helper supports multiple files, returning the first one
that matches. It checks file permissions and owner. For *.gpg files,
it will run GPG to decrypt the file.
Signed-off-by: Ted Zlatanov <tzz@lifelogs.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the conventional Python style by using 4-space indents
instead of hard tabs.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'sys' module is not imported but all of the bits
we want from it are. Adjust the script to not fail
when run on old Python versions and fix the inconsistent
use of tabs.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor clean up of if-then nesting in checks for environment variables
and config options. No functional changes.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
Allows skipping the untracked check GIT_PS1_SHOWUNTRACKEDFILES
asks for the git-prompt (in contrib/) per repository.
* mw/bash-prompt-show-untracked-config:
t9903: add extra tests for bash.showDirtyState
t9903: add tests for bash.showUntrackedFiles
shell prompt: add bash.showUntrackedFiles option
contrib/subtree updates, but here are only the ones that looked
ready. The remainder of the patches will have another day.
* dg/subtree-fixes:
contrib/subtree: make the manual directory if needed
contrib/subtree: honor DESTDIR
contrib/subtree: fix synopsis
contrib/subtree: better error handling for 'subtree add'
contrib/subtree: use %B for split subject/body
contrib/subtree: remove test number comments
Add a config option 'bash.showUntrackedFiles' which allows enabling
the prompt showing untracked files on a per-repository basis. This is
useful for some repositories where the 'git ls-files ...' command may
take a long time.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This needs to be done in two places: __git_config_get_set_variables to
allow clever completion of "git config --local --get foo<tab>", and
_git_config to allow "git config --loc<tab>" to complete to --local.
While we're there, change the order of options in the code to match
git-config.txt.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "complete with known paths only" update to completion scripts
returns directory names without trailing slash to compensate the
addition of '/' done by bash that reads from our completion result.
tcsh completion code that reads from our internal completion result
does not add '/', so let it ask our complletion code to keep the '/'
at the end.
* mk/tcsh-complete-only-known-paths:
completion: handle path completion and colon for tcsh script
The completion script used to let the default completer to suggest
pathnames, which gave too many irrelevant choices (e.g. "git add"
would not want to add an unmodified path). Teach it to use a more
git-aware logic to enumerate only relevant ones.
* mp/complete-paths:
git-completion.bash: add support for path completion
This makes the Makefile simpler, while providing more features, and more
consistency (the exact same rules with the exact same configuration as
Git official commands are applied with the new version).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
Before install git-subtree documentation, make sure the manpage
directory exists.
Signed-off-by: Jesper L. Nielsen <lyager@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-subtree's Makefile to honor DESTDIR.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the documentation of add to show that a repository can be
specified along with a commit.
Suggested by Yann Dirson <dirson@bertin.fr>.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check refspecs for validity before passing them on to other commands.
This lets us generate more helpful error messages.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use %B to format the commit message and body to avoid an extra newline
if a commit only has a subject line.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delete the comments indicating test numbers as it causes maintenance
headaches. t*.sh -i will help us find any broken tests and these
numbers are not helping us anyway.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare remote-helper test written in Python to be run with Python3.
* jk/remote-helpers-in-python-3:
git_remote_helpers: remove GIT-PYTHON-VERSION upon "clean"
git-remote-testpy: fix path hashing on Python 3
git-remote-testpy: call print as a function
git-remote-testpy: don't do unbuffered text I/O
git-remote-testpy: hash bytes explicitly
svn-fe: allow svnrdump_sim.py to run with Python 3
git_remote_helpers: use 2to3 if building with Python 3
git_remote_helpers: force rebuild if python version changes
git_remote_helpers: fix input when running under Python 3
git_remote_helpers: allow building with Python 3
Command line completion code was inadvertently made incompatible with
older versions of bash by using a newer array notation.
* bc/fix-array-syntax-for-3.0-in-completion-bash:
git-completion.bash: replace zsh notation that breaks bash 3.X
Recent enhancements to git-completion.bash provide intelligent path
completion for git commands. Such completions do not provide the
'/' at the end of directories for recent versions of bash; instead,
bash itself will add the trailing slash to directories to the result
provided by git-completion.bash. However, the completion for tcsh
uses the result of the bash completion script directly, so it either
needs to add the necessary slash itself, or needs to ask the bash
script to keep the trailing slash.
Adding the slash itself is difficult because we have to check the
each path in the output of the bash script to see if it is meant to
be a directory or something else. For example, assuming there is a
directory named 'commit' in the current directory, then, when
completing
git add commit<tab>
we would need to add a slash, but for
git help commit<tab>
we should not.
Figuring out such differences would require adding much intelligence
to the tcsh completion script. Instead, it is simpler to ask the
bash script to keep the trailing slash. This patch does this.
Also, tcsh does not handle the colon as a completion separator so we
remove it from the list of separators.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
Command line completion for "tcsh" emitted an unwanted space
after completing a single directory name.
* mk/complete-tcsh:
Prevent space after directories in tcsh completion
Fix use of an array notation that older versions of bash do not
understand.
* bc/fix-array-syntax-for-3.0-in-completion-bash:
git-completion.bash: replace zsh notation that breaks bash 3.X
The changes to allow this script to run with Python 3 are minimal and do
not affect its functionality on the versions of Python 2 that are
already supported (2.4 onwards).
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have random build artifacts in your build directory, left
behind by running "make" while on another branch, the "git help -a"
command run by __git_list_all_commands in the completion script that
is being tested does not have a way to know that they are not part
of the subcommands this build will ship. Such extra subcommands may
come from the user's $PATH. They will interfere with the tests that
expect a certain prefix to uniquely expand to a known completion.
Instrument the completion script and give it a way for us to tell
what (subset of) subcommands we are going to ship.
Also add a test to "git --help <prefix><TAB>" expansion. It needs
to show not just commands but some selected documentation pages.
Based on an idea by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
When commit d8b45314 began separating the zsh completion from the bash
completion, it introduced a zsh completion "bridge" section into the bash
completion script for zsh users to use until they migrated to the zsh
script. The zsh '+=()' append-to-array notation prevents bash 3.00.15 on
CentOS 4.x from loading the completion script and breaks test 9902. We can
easily work around this by using standard Bash array notation.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An internal ls-tree call made by completion code only to probe if
a path exists in the tree recorded in a commit object leaked error
messages when the path is not there. It is not an error at all and
should not be shown to the end user.
* ds/completion-silence-in-tree-path-probe:
git-completion.bash: silence "not a valid object" errors
Remove instructions for old vim support, which is better described
in the upstream vim documentation.
* jn/maint-trim-vim-contrib:
contrib/vim: simplify instructions for old vim support
Update tcsh command line completion so that an unwanted space is
not added to a single directory name.
* mk/complete-tcsh:
Prevent space after directories in tcsh completion
This conforms to RFC3834 and is useful in preventing eg
vacation auto-responders from replying by default
Signed-off-by: Chris Hiestand <chiestand@salk.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since command line options have higher priority than config file
variables and taking previous commit into account, we need a way
how to specify myers algorithm on command line. However,
inventing `--myers` is not the right answer. We need far more
general option, and that is `--diff-algorithm`.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users or projects prefer different algorithms over others, e.g.
patience over myers or similar. However, specifying appropriate
argument every time diff is to be used is impractical. Moreover,
creating an alias doesn't play nicely with other tools based on diff
(git-show for instance). Hence, a configuration variable which is able
to set specific algorithm is needed. For now, these four values are
accepted: 'myers' (which has the same effect as not setting the config
variable at all), 'minimal', 'patience' and 'histogram'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, when changing and committing an executable file, the file
would loose its executable bit on the hg side. Likewise, symlinks ended
up as "normal" files". This was not immediately apparent on the git side
unless one did a fresh clone.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial might convert the URL to something more appropriate, like an
absolute path. Lets store that instead of the original URL, which won't
work from a different working directory if it's relative.
Suggested-by: Max Horn <max@quendi.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though --patience was already there, we missed --minimal and
--histogram for some reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-completion.bash script did not implemented full, git aware,
support to complete paths, for git commands that operate on files within
the current working directory or the index.
As an example:
git add <TAB>
will suggest all files in the current working directory, including
ignored files and files that have not been modified.
Support path completion, for git commands where the non-option arguments
always refer to paths within the current working directory or the index,
as follows:
* the path completion for the "git rm" and "git ls-files"
commands will suggest all cached files.
* the path completion for the "git add" command will suggest all
untracked and modified files. Ignored files are excluded.
* the path completion for the "git clean" command will suggest all
untracked files. Ignored files are excluded.
* the path completion for the "git mv" command will suggest all cached
files when expanding the first argument, and all untracked and cached
files for subsequent arguments. In the latter case, empty directories
are included and ignored files are excluded.
* the path completion for the "git commit" command will suggest all
files that have been modified from the HEAD, if HEAD exists, otherwise
it will suggest all cached files.
For all affected commands, completion will always stop at directory
boundary. Only standard ignored files are excluded, using the
--exclude-standard option of the ls-files command.
When using a recent Bash version, Git path completion will be the same
as builtin file completion, e.g.
git add contrib/
will suggest relative file names.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trying to complete the command
git show master:./file
would cause a "Not a valid object name" error to be output on standard
error. Silence the error so it won't appear on the command line.
Signed-off-by: Dylan Smith <dylan.ah.smith@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rely on the upstream filetype.vim instead of duplicating its rules in
git's instructions for syntax highlighting support on pre-7.2 vim
versions.
The result is a shorter contrib/vim/README. More importantly, it lets
us punt on maintenance of the autocmd rules.
So now when we fix the upstream gitsendemail rule in light of commit
eed6ca7, new git users stuck on old vim reading contrib/vim/README can
automagically get the fix without any further changes needed to git.
Once the world has moved on to vim 7.2+ completely, we can get rid of
these instructions, but for now if they are this simple it's
effortless to keep them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New remote helper for bzr, with minimum fix squashed in.
* fc/remote-bzr:
remote-bzr: detect local repositories
remote-bzr: add support for older versions of bzr
remote-bzr: add support to push special modes
remote-bzr: add support for fecthing special modes
remote-bzr: add simple tests
remote-bzr: update working tree upon pushing
remote-bzr: add support for remote repositories
remote-bzr: add support for pushing
Add new remote-bzr transport helper
Some python scripts we ship cannot be run with older versions of the
interpreter.
* er/python-version-requirements:
Add checks to Python scripts for version dependencies.
If git-completion.bash returns a single directory as a completion,
tcsh will automatically add a space after it, which is not what the
user wants.
This commit prevents tcsh from doing this.
Also, a check is added to make sure the tcsh version used is recent
enough to allow completion to work as expected.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So we don't create a clone unnecessarily.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional third parameter when __git_ps1 is used in
PROMPT_COMMAND mode as format string for printf to further
customize the way the git status string is embedded in the
user's PS1 prompt.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various entries in our .mailmap file.
* jk/mailmap-cleanup:
contrib: update stats/mailmap script
.mailmap: normalize emails for Linus Torvalds
.mailmap: normalize emails for Jeff King
.mailmap: fix broken entry for Martin Langhoff
.mailmap: match up some obvious names/emails
The "-c" and "-C" options take an existing commit, so let's
complete refs, just as we would for --squash or --fixup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A 'git push' doesn't update the working directory on the remote, but
a 'bzr push' does. Teach the remote helper for bzr to update the
working tree on the bzr side upon pushing via the "export" command.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This version changes quite a few things:
1. The original parsed the mailmap file itself, and it did
it wrong (it did not understand entries with an extra
email key).
Instead, this version uses git's "%aE" and "%aN"
formats to have git perform the mapping, meaning we do
not have to read .mailmap at all, but still operate on
the current state that git sees (and it also works
properly from subdirs).
2. The original would find multiple names for an email,
but not the other way around.
This version can do either or both. If we find multiple
emails for a name, the resolution is less obvious than
the other way around. However, it can still be a
starting point for a human to investigate.
3. The original would order only by count, not by recency.
This version can do either. Combined with showing the
counts, it can be easier to decide how to resolve.
4. This version shows similar entries in a blank-delimited
stanza, which makes it more clear which options you are
picking from.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of __git_ps1 function operating in two-arg mode was
not very clear. It said "set PROMPT_COMMAND=__git_ps1" which is not
the right usage for this mode, followed by "To customize the prompt,
do this", giving a false impression that those who do not want to
customize it can get away with no-arg form, which was incorrect.
Make it clear that this mode always takes two arguments, pre and
post, with an example.
The straight-forward one should be listed as the primary usage, and
the confusing one should be an alternate for advanced users. Swap
the order of these two.
Acked-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For bash completion, the option '-o bashdefault' is used to indicate
that when no other choices are available, file completion should be
performed. Since this option is not available in tcsh, no file
completion is ever performed. Therefore, commands like 'git add ',
'git send-email ', etc, require the user to manually type out
the file name. This can be quite annoying.
To improve the user experience we try to simulate file completion
directly in this script (although not perfectly).
The known issues with the file completion simulation are:
- Possible completions are shown with their directory prefix.
- Completions containing shell variables are not handled.
- Completions with ~ as the first character are not handled.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_PS1_DESCRIBE_STYLE was introduced in v1.6.3.2~35. Document it in the
header comments.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New remote helper for hg.
* fc/remote-hg: (22 commits)
remote-hg: fix for older versions of python
remote-hg: fix for files with spaces
remote-hg: avoid bad refs
remote-hg: try the 'tip' if no checkout present
remote-hg: fix compatibility with older versions of hg
remote-hg: add missing config for basic tests
remote-hg: the author email can be null
remote-hg: add option to not track branches
remote-hg: add extra author test
remote-hg: add tests to compare with hg-git
remote-hg: add bidirectional tests
test-lib: avoid full path to store test results
remote-hg: add basic tests
remote-hg: fake bookmark when there's none
remote-hg: add compat for hg-git author fixes
remote-hg: add support for hg-git compat mode
remote-hg: match hg merge behavior
remote-hg: make sure the encoding is correct
remote-hg: add support to push URLs
remote-hg: add support for remote pushing
...
A mediawiki page can contain, and even start with a " character, we have
to escape it when generating the fast-export stream, as well as \
character. While we're there, also escape newlines, but I don't think we
can get them from MediaWiki pages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user might get something like:
git-completion.sh:2466: command not found: compdef
If this script is loaded before compinit. The script would work either
way, but let's not be more annoying to the user.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strictly speaking bzr doesn't need any changes to interact with remote
repositories, but it's dead slow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Amit Bakshi reported, older versions of python (< 2.7) don't have
subprocess.check_output, so let's use subprocess.Popen directly as
suggested.
Suggested-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tcsh users sometimes alias the 'git' command to another name. In
this case, the user expects to only have to issue a new 'complete'
command using the alias name.
However, the tcsh script currently uses the command typed by the
user to call the appropriate function in git-completion.bash, either
_git() or _gitk(). When using an alias, this technique no longer
works.
This change specifies the real name of the command (either 'git' or
'gitk') as a parameter to the script handling tcsh completion. This
allows the user to use any alias for the 'git' or 'gitk' commands,
while still getting completion to work.
A check for the presence of ${HOME}/.git-completion.bash is also
added to help the user make use of the script properly.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
