When "git commit --template F" errors out because the user did not
touch the message, it claimed that it aborts due to "empty message",
which was utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
"git commit --author=$name" did not tell the name that was being
recorded in the resulting commit to hooks, even though it does do so
when the end user overrode the authorship via the "GIT_AUTHOR_NAME"
environment variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
We used to underline a header text, like this:
This is a header
----------------
content...
But calculating text length so that the dashes align with the text
could get complicated because the text could be in any charset in
translated Git.
There is no point to use this pseudo underline; simply a blank
line would do and it even makes it easier to read:
This is a header
content...
While at it, give translators more context to translate, e.g.
e.g. "git commands available..." instead of "%s available..."
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps remove \n from translatable strings
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also marks most common commands' synopsis for translation
so that "git help" gives a friendly listing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-cherry-pick --allow-empty command by default only preserves empty
commits that were originally empty, i.e only those commits for which
<commit>^{tree} and <commit>^^{tree} are equal. By default commits which are
non-empty, but were made empty by the inclusion of a prior commit on the current
history are filtered out. This option allows us to override that behavior and
include redundant commits as empty commits in the change history.
Note that this patch changes the default behavior of git cherry-pick slightly.
Prior to this patch all commits in a cherry-pick sequence were applied and git
commit was run. The implication here was that, if a commit was redundant, and
the commit did not trigger the fast forward logic, the git commit operation, and
therefore the git cherry-pick operation would fail, displaying the cherry pick
advice (i.e. run git commit --allow-empty). With this patch however, such
redundant commits are automatically skipped without stopping, unless
--keep-redundant-commits is specified, in which case, they are automatically
applied as empty commits.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl,
may fail to hold all of them. Now such an internal invocation can feed
the references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
"git fetch" that recurses into submodules on demand did not check if
it needs to go into submodules when non branches (most notably, tags)
are fetched.
By Jens Lehmann
* jl/maint-submodule-recurse-fetch:
submodules: recursive fetch also checks new tags for submodule commits
"git blame" started missing quite a few changes from the origin since we
stopped using the diff minimalization by default in v1.7.2 era.
* jc/maint-blame-minimal:
blame: accept --need-minimal
Valgrind reports quite a lot of discarded memory inside apply.
Fix them, audit and document the buffer ownership rules.
By Junio C Hamano (8) and Jared Hance (1)
* jh/apply-free-patch:
apply: document buffer ownership rules across functions
apply: tighten constness of line buffer
apply: drop unused macro
apply: free unused fragments for submodule patch
apply: free patch->result
apply: release memory for fn_table
apply: free patch->{def,old,new}_name fields
apply: rename free_patch() to free_patch_list()
apply: do not leak patches and fragments
"git rev-parse --show-prefix" emitted nothing when run at the
top-level of the working tree, while "git rev-parse --show-cdup" gave
an empty line. Make them consistent.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
Adds some subcommands that were not listed in "git remote --help"
usage strings.
As an independent follow-up, we may want to rethink how the overall
usage string and subcommand usage strings are maintained.
By Michael Schubert
* ms/remote-usage-string:
remote: update builtin usage
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
Fix broken 'push to upstream' implementation. "git push $there" without
refspec, when the current branch is set to push to a remote different from
$there, used to push to $there using the upstream information to a remote
unreleated to $there.
* jc/push-upstream-sanity:
push: error out when the "upstream" semantics does not make sense
The "fmt-merge-msg" command learns to list the primary contributors
involved in the side topic you are merging.
* jc/fmt-merge-msg-people:
fmt-merge-msg: show those involved in a merged series
This is used by "git pull" to construct a merge message from list of
remote refs. When pulling redundant set of refs, however, it did not
filter them even though the merge itself discards them as unnecessary.
Teach the command to do the same for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gc executes many sub-commands. The argument list for
some of these is constant, but for others we add more
arguments at runtime. The latter is implemented by allocating
a constant extra number of NULLs, and either using a custom
append function, or just referencing unused slots by number.
As of commit 7e52f56, which added two new arguments, it is
possible to exceed the constant number of slots for "repack"
by running "git gc --aggressive", causing "git gc" to die.
This patch converts all of the static argv lists to use
argv-array. In addition to fixing the overflow caused by
7e52f56, it has a few advantages:
1. We can drop the custom append function (which,
incidentally, had an off-by-one error exacerbating the
static limit).
2. We can drop the ugly magic numbers used when adding
arguments to "prune".
3. Adding further arguments will be easier; you can just
add new "push" calls without worrying about increasing
any static limits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of waiting until we record the parents of resulting merge, reduce
redundant parents (including our HEAD) immediately after reading them.
The change to t7602 illustrates the essence of the effect of this change.
The octopus merge strategy used to be fed with redundant commits only to
discard them as "up-to-date", but we no longer feed such redundant commits
to it and the affected test degenerates to a regular two-head merge.
And obviously the known-to-be-broken test in t6028 is now fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code around to populate remoteheads list early in the process
before any decision regarding twohead vs octopus and fast-forwardness is
made.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_local_ref() used to say "[new branch]" when we stored a new ref
outside refs/tags/ hierarchy, but the message is more about what we
fetched, so use the refname at the origin to make that decision.
Also, only call a new ref a "branch" if it's under refs/heads/.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way, the function can look at the remote side to adjust the
informational message it gives.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git commit --template F" errors out because the user did not touch
the message, it claimed that it aborts due to "empty message", which was
utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
Even with "-q"uiet option, "checkout" used to report setting up tracking.
Also "branch" learns "-q"uiet option to squelch informational message.
By Jeff King
* jk/branch-quiet:
teach "git branch" a --quiet option
checkout: suppress tracking message with "-q"
Forbids rename detection logic from matching two empty files as renames
during merge-recursive to prevent mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
"git commit --author=$name" did not tell the name that was being recorded
in the resulting commit to hooks, even though it does do so when the end
user overrode the authorship via the "GIT_AUTHOR_NAME" environment
variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
Use API to read blob data in smaller chunks in more places to reduce the
memory footprint.
By Nguyễn Thái Ngọc Duy (6) and Junio C Hamano (1)
* nd/stream-more:
update-server-info: respect core.bigfilethreshold
fsck: use streaming API for writing lost-found blobs
show: use streaming API for showing blobs
parse_object: avoid putting whole blob in core
cat-file: use streaming API to print blobs
Add more large blob test cases
streaming: make streaming-write-entry to be more reusable
If a commit-ish passed to cherry-pick or revert happens to have a file
of the same name, git complains that the argument is ambiguous and
advises to use '--'. To make things worse, the '--' argument is removed
by parse_options, und so passing '--' has no effect.
Instead, always interpret cherry-pick/revert arguments as revisions.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 88a21979c (fetch/pull: recurse into submodules when necessary) all
fetched commits are examined if they contain submodule changes (unless
configuration or command line options inhibit that). If a newly recorded
submodule commit is not present in the submodule, a fetch is run inside
it to download that commit.
Checking new refs was done in an else branch where it wasn't executed for
tags. This normally isn't a problem because tags are only fetched with
the branches they live on, then checking the new commits in the fetched
branches for submodule commits will also process all tags. But when a
specific tag is fetched (or the refspec contains refs/tags/) commits only
reachable by tags won't be searched for submodule commits, which is a bug.
Fix that by moving the code outside the if/else construct to handle new
tags just like any other ref. The performance impact of adding tags that
most of the time lie on a branch which is checked anyway for new submodule
commit should be minimal, as since 6859de4 (fetch: avoid quadratic loop
checking for updated submodules) all ref-tips are collected first and then
fed to a single rev-list.
Spotted-by: Jeff King <peff@peff.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, the private functions in this file were not very
much documented; even though what each of them do is reasonably
self explanatory, the ownership rules for various buffers and
data structures were not very obvious.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These point into a single line in the patch text we read from
the input, and they are not used to modify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git cherry-pick fails when picking a non-ff commit that is empty. The advice
given with the failure is that a git-commit --allow-empty should be issued to
explicitly add the empty commit during the cherry pick. This option allows a
user to specify before hand that they want to keep the empty commit. This
eliminates the need to issue both a cherry pick and a commit operation.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between v1.7.1 and v1.7.2, 582aa00bdf switched the default "diff"
invocation not to use XDF_NEED_MINIMAL, but this breaks "git blame"
rather badly.
Allow the command line option to ask for an extra careful matching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack everything into one big pack with "git repack
-Ad", any unreferenced objects in to-be-deleted packs are
exploded into loose objects, with the intent that they will
be examined and possibly cleaned up by the next run of "git
prune".
Since the exploded objects will receive the mtime of the
pack from which they come, if the source pack is old, those
loose objects will end up pruned immediately. In that case,
it is much more efficient to skip the exploding step
entirely for these objects.
This patch teaches pack-objects to receive the expiration
information and avoid writing these objects out. It also
teaches "git gc" to pass the value of gc.pruneexpire to
repack (which in turn learns to pass it along to
pack-objects) so that this optimization happens
automatically during "git gc" and "git gc --auto".
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print out a trailing newline when --show-prefix is run with cwd
at the top level of the tree which results in an empty prefix.
Behavior is now like --show-cdup.
Fixes an expected failure in t1501.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing options "--tags|--no-tags" and "--push".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/cache-tree:
t0090: be prepared that 'wc -l' writes leading blanks
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the "--index-version <n>" parameter, write the index out in the
specified version. With this, an index file that is written in newer
format (say v4) can be downgraded to be read by older versions of Git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a remote repo has too many tags (or branches), cloning it over the
smart HTTP transport can fail because remote-curl.c puts all the refs
from the remote repo on the fetch-pack command line. This can make the
command line longer than the global OS command line limit, causing
fetch-pack to fail.
This is especially a problem on Windows where the command line limit is
orders of magnitude shorter than Linux. There are already real repos out
there that msysGit cannot clone over smart HTTP due to this problem.
Here is an easy way to trigger this problem:
git init too-many-refs
cd too-many-refs
echo bla > bla.txt
git add .
git commit -m test
sha=$(git rev-parse HEAD)
tag=$(perl -e 'print "bla" x 30')
for i in `seq 50000`; do
echo $sha refs/tags/$tag-$i >> .git/packed-refs
done
Then share this repo over the smart HTTP protocol and try cloning it:
$ git clone http://localhost/.../too-many-refs/.git
Cloning into 'too-many-refs'...
fatal: cannot exec 'fetch-pack': Argument list too long
50k tags is obviously an absurd number, but it is required to
demonstrate the problem on Linux because it has a much more generous
command line limit. On Windows the clone fails with as little as 500
tags in the above loop, which is getting uncomfortably close to the
number of tags you might see in real long lived repos.
This is not just theoretical, msysGit is already failing to clone our
company repo due to this. It's a large repo converted from CVS, nearly
10 years of history.
Four possible solutions were discussed on the Git mailing list (in no
particular order):
1) Call fetch-pack multiple times with smaller batches of refs.
This was dismissed as inefficient and inelegant.
2) Add option --refs-fd=$n to pass a an fd from where to read the refs.
This was rejected because inheriting descriptors other than
stdin/stdout/stderr through exec() is apparently problematic on Windows,
plus it would require changes to the run-command API to open extra
pipes.
3) Add option --refs-from=$tmpfile to pass the refs using a temp file.
This was not favored because of the temp file requirement.
4) Add option --stdin to pass the refs on stdin, one per line.
In the end this option was chosen as the most efficient and most
desirable from scripting perspective.
There was however a small complication when using stdin to pass refs to
fetch-pack. The --stateless-rpc option to fetch-pack also uses stdin for
communication with the remote server.
If we are going to sneak refs on stdin line by line, it would have to be
done very carefully in the presence of --stateless-rpc, because when
reading refs line by line we might read ahead too much data into our
buffer and eat some of the remote protocol data which is also coming on
stdin.
One way to solve this would be to refactor get_remote_heads() in
fetch-pack.c to accept a residual buffer from our stdin line parsing
above, but this function is used in several places so other callers
would be burdened by this residual buffer interface even when most of
them don't need it.
In the end we settled on the following solution:
If --stdin is specified without --stateless-rpc, fetch-pack would read
the refs from stdin one per line, in a script friendly format.
However if --stdin is specified together with --stateless-rpc,
fetch-pack would read the refs from stdin in packetized format
(pkt-line) with a flush packet terminating the list of refs. This way we
can read the exact number of bytes that we need from stdin, and then
get_remote_heads() can continue reading from the same fd without losing
a single byte of remote protocol data.
This way the --stdin option only loses generality and scriptability when
used together with --stateless-rpc, which is not easily scriptable
anyway because it also uses pkt-line when talking to the remote server.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user exited editor without editing the commit log template given
by "git commit -t <template>", the commit was aborted (correct) with an
error message that said "due to empty commit message" (incorrect).
This was because the original template support was done by piggybacking on
the check to detect an empty log message. Split the codepaths into two
independent checks to clarify the error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-t template" and "-F msg" options are both given (or worse yet,
there is "commit.template" configuration but a message is given in some
other way), the documentation says that template is ignored. However,
the "has the user edited the message?" check still used the contents of
the template file as the basis of the emptyness check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We simply discarded the fragments that we are not going to use upon seeing
a patch to update the submodule commit bound at path that we have not
checked out.
Free these fragments, not to leak them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.9-8-g270a344 (config: stop using config_exclusive_filename) replaced
config_exclusive_filename with given_config_file. In one case this
resulted in a self-assignment, which is reported by clang as a warning.
Remove the useless code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is by far the largest piece of data, much larger than the patch and
fragment structures or the three name fields in the patch structure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fn_table is used to record the result of earlier patch application in
case a hand-crafted input file contains multiple patches to the same file.
Both its string key (filename) and the contents are borrowed from "struct
patch" that represents the previous application in the same apply_patch()
call, and they do not leak, but the table itself was not freed properly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were all allocated in the heap by parsing the header parts of the
patch, but we did not bother to free them. Some used to share the memory
(e.g. copying def_name to old_name) so this is not just the matter of
adding three calls to free().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's currently no way to suppress the informational
"deleted branch..." or "set up tracking..." messages. This
patch provides a "-q" option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the "switched to..." message (which is already
suppressed by "-q"), this message is purely informational.
Let's silence it if the user asked us to be quiet.
This patch is slightly more than a one-liner, because we
have to teach create_branch to propagate the flag all the
way down to install_branch_config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This macro already evaluates to the correct type, as it
casts the string literal to "unsigned char *" itself
(and callers who want the literal can use the _LITERAL
form).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though 1.7.9.x series does not open the editor by default
when merging in general, it does do so in one occassion: when
merging an annotated tag. And worse yet, there is no good way
for older scripts to decline this.
Backport the support for GIT_MERGE_AUTOEDIT environment variable
from 1.7.10 track to help those stuck on 1.7.9.x maintenance
track.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we already walk the history of the branch that gets merged to
come up with a short log, let's label it with names of the primary
authors, so that the user who summarizes the merge can easily give
credit to them in the log message.
Also infer the names of "lieutents" to help integrators at higher
level of the food-chain to give credit to them, by counting:
* The committer of the 'tip' commit that is merged
* The committer of merge commits that are merged
Often the first one gives the owner of the history being pulled, but
his last pull from his sublieutenants may have been a fast-forward,
in which case the first one would not be. The latter rule will
count the integrator of the history, so together it might be a
reasonable heuristics.
There are two special cases:
- The "author" credit is omitted when the series is written solely
by the same author who is making the merge. The name can be seen
on the "Author" line of the "git log" output to view the log
message anyway.
- The "lieutenant" credit is omitted when there is only one key
committer in the merged branch and it is the committer who is
making the merge. Typically this applies to the case where the
developer merges his own branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag -s" honored "gpg.program" configuration variable since
1.7.9, but "git tag -v" and "git verify-tag" didn't.
By Alex Zepeda
* az/verify-tag-use-gpg-config:
verify-tag: Parse GPG configuration options.
When lying the author name via GIT_AUTHOR_NAME environment variable
to "git commit", the hooks run by the command saw it and could act
on the name that will be recorded in the final commit. When the user
uses the "--author" option from the command line, the command should
give the same information to the hook, and back when "git command"
was a scripted Porcelain, it did set the environment variable and
hooks can learn the author name from it.
However, when the command was reimplemented in C, the rewritten code
was not very faithful to the original, and hooks stopped getting the
authorship information given with "--author". Fix this by exporting
the necessary environment variables.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify verify-tag to load relevant GPG variables from the git
configuratio file. This allows git tag -v to use an alternative
GPG binary in the same way that git tag -s does.
Signed-off-by: Alex Zepeda <alex@inferiorhumanorgans.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the while loop inside apply_patch, patch and fragments are
dynamically allocated with a calloc. However, only unused patches
are actually freed and the rest are left to leak. Since a list is
actively built up consisting of the used patches, they can simply be
iterated and freed at the end of the function.
In addition, the text in fragments were not freed, primarily because
they mostly point into a patch text that is freed as a whole. But
there are some cases where new piece of memory is allocated and
pointed by a fragment (namely, when handling a binary patch).
Introduce a free_patch bitfield to mark each fragment if its text
needs to be freed, and free patches, fragments and fragment text
that need to be freed when we are done with the input.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both git-prune and git-repack (and thus, git-gc) try to rmdir while
holding a DIR* handle on the directory. This can leave dangling
empty directories in the .git/objects on platforms where directory
cannot be removed while they are open.
First call closedir() and then rmdir(); that is more logical ordering.
Reported-by: John Chen <john0312@gmail.com>
Reported-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Improved-and-Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command indirectly calls check_sha1_signature() (add_info_ref ->
deref_tag -> parse_object -> ..) , which may put whole blob in memory
if the blob's size is under core.bigfilethreshold. As config is not
read, the threshold is always 512MB. Respect user settings here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make merge --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make log --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make show --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Default to the real terminal width for diff --stat output, instead
of the hard-coded 80 columns.
Some projects (especially in Java), have long filename paths, with
nested directories or long individual filenames. When files are
renamed, the filename part in stat output can be almost useless. If
the middle part between { and } is long (because the file was moved to
a completely different directory), then most of the path would be
truncated.
It makes sense to detect and use the full terminal width and display
full filenames if possible.
The are commands like diff, show, and log, which can adapt the output
to the terminal width. There are also commands like format-patch,
whose output should be independent of the terminal width. Since it is
safer to use the 80-column default, the real terminal width is only
used if requested by the calling code by setting diffopts.stat_width=-1.
Normally this value is 0, and can be set by the user only to a
non-negative value, so -1 is safe to use internally.
This patch only changes the diff builtin to use the full terminal width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
PARSE_OPT_NEGHELP is confusing because short options defined with that
flag do the opposite of what the helptext says. It is also not needed
anymore now that options starting with no- can be negated by removing
that prefix. Convert its only two users to OPT_NEGBIT() and OPT_BOOL()
and then remove support for PARSE_OPT_NEGHELP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --quiet is specified, finish_object() is called instead of
show_object(). The latter is in charge of --verify-objects and
will be skipped if --quiet is specified.
Move the code up to finish_object(). Also pass the quiet flag along
and make it always call show_* functions to avoid similar problems in
future.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c99f069 (bisect--helper: remove "--next-vars" option as it is
now useless - 2009-04-21), this flag has always been off. Remove the
flag and all related code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful to resolve a symbolic ref and output the result in a
shortened form, such as for use in shell prompts. Add a "--short" option
to do so.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
print_ref_list looks up the merge_filter_ref and assumes that a valid
pointer is returned. When the object doesn't exist, it tries to
dereference a NULL pointer. This can be the case when git branch
--merged is given an argument that isn't a valid commit name.
Check whether the lookup returns a NULL pointer and die with an error
if it does. Add a test, while we're at it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/push-prune:
push: add '--prune' option
remote: refactor code into alloc_delete_ref()
remote: reorganize check_pattern_match()
remote: use a local variable in match_push_refs()
Conflicts:
builtin/push.c
It looks like commit 99fb6e04 (pack-objects: convert to use
parse_options(), 2012-02-01) moved the #ifdef NO_PTHREDS around but
hasn't noticed that the 'arg' variable no longer is available.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Nguyen Thai Ngoc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/config-include:
: An assignment to the include.path pseudo-variable causes the named file
: to be included in-place when Git looks up configuration variables.
config: add include directive
config: eliminate config_exclusive_filename
config: stop using config_exclusive_filename
config: provide a version of git_config with more options
config: teach git_config_rename_section a file argument
config: teach git_config_set_multivar_in_file a default path
config: copy the return value of prefix_filename
t1300: add missing &&-chaining
docs/api-config: minor clarifications
docs: add a basic description of the config API
The heuristic used by "git merge" to decide if it automatically gives an
editor upon clean automerge is to see if the standard input and the
standard output is the same device and is a tty, we are in an interactive
session. "The same device" test was done by comparing fstat(2) result on
the two file descriptors (and they must match), and we asked isatty() only
for the standard input (we insist that they are the same device and there
is no point asking tty-ness of the standard output).
The stat(2) emulation in the Windows port however does not give a usable
value in the st_ino field, so even if the standard output is connected to
something different from the standard input, "The same device" test may
incorrectly return true. To accomodate it, add another isatty() check for
the standard output stream as well.
Reported-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing groups of refs to a remote, there is no simple way to remove
old refs that still exist at the remote that is no longer updated from us.
This will allow us to remove such refs from the remote.
With this change, running this command
$ git push --prune remote refs/heads/*:refs/remotes/laptop/*
removes refs/remotes/laptop/foo from the remote if we do not have branch
"foo" locally anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
The canonical order of command line arguments is always to have dashed
commands before other parameters, but the "git remote set-branches"
subcommand was described to take "name" before an optional "--add".
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-config command sometimes operates on the default set
of config files (either reading from all, or writing to repo
config), and sometimes operates on a specific file. In the
latter case, we set the magic global config_exclusive_filename,
and the code in config.c does the right thing.
Instead, let's have git-config use the "advanced" variants
of config.c's functions which let it specify an individual
filename (or NULL for the default). This makes the code a
lot more obvious, and fixes two small bugs:
1. A relative path specified by GIT_CONFIG=foo will look
in the wrong directory if we have to chdir as part of
repository setup. We already handle this properly for
"git config -f foo", but the GIT_CONFIG lookup used
config_exclusive_filename directly. By dropping to a
single magic variable, the GIT_CONFIG case now just
works.
2. Calling "git config -f foo --edit" would not respect
core.editor. This is because just before editing, we
called git_config, which would respect the
config_exclusive_filename setting, even though this
particular git_config call was not about looking in the
user's specified file, but rather about loading actual
git config, just as any other git program would.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_filename function returns a pointer to a static
buffer which may be overwritten by subsequent calls. Since
we are going to keep the result around for a while, let's be
sure to duplicate it for safety.
I don't think this can be triggered as a bug in the current
code, but it's a good idea to be defensive, as any resulting
bug would be quite subtle.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/blame.c has a helper function to compute how many columns
we need to show a line-number, whose implementation is reusable as
a more generic helper function to count the number of columns
necessary to show any cardinal number.
Rename it to decimal_width(), move it to pager.c and export it for
use by future callers.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
* nd/pack-objects-parseopt:
pack-objects: convert to use parse_options()
pack-objects: remove bogus comment
pack-objects: do not accept "--index-version=version,"
* mh/war-on-extra-refs:
refs: remove the extra_refs API
clone: do not add alternate references to extra_refs
everything_local(): mark alternate refs as complete
fetch-pack.c: inline insert_alternate_refs()
fetch-pack.c: rename some parameters from "path" to "refname"
clone.c: move more code into the "if (refs)" conditional
t5700: document a failure of alternates to affect fetch
* jk/maint-tag-show-fixes:
tag: do not show non-tag contents with "-n"
tag: die when listing missing or corrupt objects
tag: fix output of "tag -n" when errors occur
Conflicts:
t/t7004-tag.sh
Receive runs rev-list --verify-objects in order to detect missing
objects. However, such errors are ignored and overridden later.
Instead, consequently ignore all update commands for which an error has
already been detected.
Some tests in t5504 are obsoleted by this change, because invalid
objects are detected even if fsck is not enabled. Instead, they now test
for different error messages depending on whether or not fsck is turned
on. A better fix would be to force a corruption that will be detected by
fsck but not by rev-list.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, progress output is disabled if stderr is not a terminal.
The --progress option can be used to force progress output anyways.
Conversely, --no-progress does not force progress output. In particular,
if stderr is a terminal, progress output is enabled.
This is unintuitive. Change --no-progress to force output off.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-list passes rev_list_info, not rev_list objects. Without this
fix, rev-list enables or disables the --verify-objects option depending
on a read from an undefined memory location.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, sparse complains as follows:
SP builtin/tag.c
builtin/tag.c:411:5: warning: symbol 'parse_opt_points_at' was \
not declared. Should it be static?
In order to suppress the warning, since the parse_opt_points_at()
function does not need to be an external symbol, we simply add the
static modifier to the function definition.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-tag-show-fixes:
tag: do not show non-tag contents with "-n"
tag: die when listing missing or corrupt objects
tag: fix output of "tag -n" when errors occur
Conflicts:
t/t7004-tag.sh
Alternate references are directly (and now, correctly) handled by
fetch-pack, so there is no need to inform fetch-pack about them via
the extra_refs back channel.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Objects in an alternate object database are already available to the
local repository and therefore don't need to be fetched. So mark them
as complete in everything_local().
This fixes a test in t5700.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic of the (single) caller is clearer without encapsulating this
one line in a function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameters denote reference names, which are no longer 1:1 with
filesystem paths.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bahavior of a bunch of code before the "if (refs)" statement also
depends on whether refs is set, so make the logic clearer by shifting
this code into the if statement.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
