Instead of barfing, simply ignore bad object names seen in the
input. This is useful when reading from "git notes list" output
that may refer to objects that have already been garbage collected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the command to read object names to remove from the standard
input, in addition to the object names given from the command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the application, it is not necessarily an error for an object
to lack a note, especially if the only thing the caller wants to make sure
is that notes are cleared for an object. By passing this option from the
command line, the "git notes remove" command considers it a success if the
object did not have any note to begin with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While "xargs -n1 git notes rm" is certainly a possible way to remove notes
from many objects, this would create one notes "commit" per removal, which
is not quite suitable for seasonal housekeeping.
Allow taking more than one on the command line, and record their removal
as a single atomic event if everthing goes well.
Even though the old code insisted that "git notes rm" must be given only
one object (or zero, in which case it would default to HEAD), this
condition was not tested. Add tests to handle the new case where we feed
multiple objects, and also make sure if there is a bad input, no change
is recorded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git ls-remote" uses its exit status to indicate if it successfully
talked with the remote repository. A new option "--exit-code" makes the
command exit with status "2" when there is no refs to be listed, even when
the command successfully talked with the remote repository.
This way, the caller can tell if we failed to contact the remote, or the
remote did not have what we wanted to see. Of course, you can inspect the
output from the command, which has been and will continue to be a valid
way to check the same thing.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return codes of git_config_set() and friends are magic numbers right
in the source. #define them in cache.h where the functions are declared,
and use the constants in the source.
Also, mention the resulting exit codes of "git config" in its man page
(and complete the list).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
* mg/merge-ff-config:
tests: check git does not barf on merge.ff values for future versions of git
merge: introduce merge.ff configuration variable
Conflicts:
t/t7600-merge.sh
Add a no-op wrapper library for Git's shell scripts. To split up the
gettext series I'm first submitting patches to gettextize the source
tree before I add any of the Makefile and Shell library changes needed
to actually use them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git-sh-i18n--envsubst program which is a stripped-down version
of the GNU envsubst(1) program that comes with GNU gettext for use in
the eval_gettext() fallback.
We need a C helper program because implementing eval_gettext() purely
in shell turned out to be unworkable. Digging through the Git mailing
list archives will reveal two shell implementations of eval_gettext
that are almost good enough, but fail on an edge case which is tested
for in the tests which are part of this patch.
These are the modifications I made to envsubst.c as I turned it into
sh-i18n--envsubst.c:
* Added our git-compat-util.h header for xrealloc() and friends.
* Removed inclusion of gettext-specific headers.
* Removed most of main() and replaced it with my own. The modified
version only does option parsing for --variables. That's all it
needs.
* Modified error() invocations to use our error() instead of
error(3).
* Replaced the gettext XNMALLOC(n, size) macro with just
xmalloc(n). Since XNMALLOC() only allocated char's.
* Removed the string_list_destroy function. It's redundant (also in
the upstream code).
* Replaced the use of stdbool.h (a C99 header) by doing the following
replacements on the code:
* s/bool/unsigned short int/g
* s/true/1/g
* s/false/0/g
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
* vh/config-interactive-singlekey-doc:
git-reset.txt: better docs for '--patch'
git-checkout.txt: better docs for '--patch'
git-stash.txt: better docs for '--patch'
git-add.txt: document 'interactive.singlekey'
config.txt: 'interactive.singlekey; is used by...
This reverts commit d0546e2d48, which
was only meant to be a Proof-of-concept used during the discussion.
The real implementation of the feature needs to wait until we migrate
all the code to use "struct pathspec", not "char **", to represent
richer semantics given to pathspec.
The --interactive flag is already shared by git add and git commit,
share the -p and --patch flags too.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just like --porcelain, except that we always output
the commit information for each line, not just the first
time it is referenced. This can make quick and dirty scripts
much easier to write; see the example added to the blame
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behaviour of git commit --interactive so that when you abort
the commit (by leaving the commit message empty) the index remains
unchanged.
Hitherto an aborted commit --interactive has added the selected hunks to
the index regardless of whether the commit succeeded or not.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable gives the default setting for --ff, --no-ff or --ff-only
options of "git merge" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/info-man-path:
Documentation: clarify meaning of --html-path, --man-path, and --info-path
git: add --info-path and --man-path options
Conflicts:
Makefile
Describe '-p' as a short form of '--patch' in synopsis. Also include a better
explanation of this option and additionally refer the reader to the patch mode
description of git-add documentation.
Helped-by: Jeff King <peff@peff.net>
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe '-p' as a short form of '--patch' in synopsis and options. Also
refer the reader to the patch mode description of git-add documentation.
Helped-by: Jeff King <peff@peff.net>
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe '-p' as a short form of '--patch' in synopsis and options. Also
refer the reader to the patch mode description of git-add documentation.
Helped-by: Jeff King <peff@peff.net>
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is documented in the section about the 'Interactive Mode', rather than for
the option '--patch', since this is the section is where people go to learn
about '--patch'.
Helped-by: Jeff King <peff@peff.net>
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config variable 'interactive.singlekey' influences also '--patch' mode of
git-add, git-reset, and git-checkout.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove spurious "=" after --relative-marks.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7d6cb10b ("grep: Add the option '--line-number'", 2011-03-28)
introduced the --line-number option and added its description to OPTIONS
section, but forgot to update SYNOPSIS.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/format-patch-doc:
Documentation/format-patch: suggest Toggle Word Wrap add-on for Thunderbird
Documentation: publicize hints for sending patches with GMail
Documentation: publicize KMail hints for sending patches inline
Documentation: hints for sending patches inline with Thunderbird
Documentation: explain how to check for patch corruption
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options tell UI programs where git put its documentation, so
"Help" actions can show the documentation for *this* version of git
without regard to how MANPATH and INFOPATH are set up. Details:
. Each variable tells where documentation is expected to be. They do
not indicate whether documentation was actually installed.
. The output of "git --html-path" is an absolute path and can be used
in "file://$(git --html-path)/git-add.html" to name the HTML file
documenting a particular command.
. --man-path names a manual page hierarchy (e.g.,
/home/user/share/man). Its output can be passed to "man -M" or put
at the beginning of $MANPATH.
. --info-path names a directory with info files (e.g.,
/home/user/share/info). Its output is suitable as an argument to
"info -d" or for inclusion in $INFOPATH.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the way the --html-path option lets UI programs learn where git
has its HTML documentation pages, expose the other two paths used to store
the documentation pages of these two types.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.
The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).
For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.
In linux-2.6.git, running the three different --dirstat modes:
time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null
yields the following average runtimes on my machine:
- "changes" (default): ~6.0 s
- "lines": ~9.6 s
- "files": ~0.1 s
So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.
The patch also includes documentation and tests for the new dirstat mode.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new diff.dirstat config variable takes the same arguments as
'--dirstat=<args>', and specifies the default arguments for --dirstat.
The config is obviously overridden by --dirstat arguments passed on the
command line.
When not specified, the --dirstat defaults are 'changes,noncumulative,3'.
The patch also adds several tests verifying the interaction between the
diff.dirstat config variable, and the --dirstat command line option.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having multiple interconnected dirstat-related options, teach
the --dirstat option itself to accept all behavior modifiers as parameters.
- Preserve the current --dirstat=<limit> (where <limit> is an integer
specifying a cut-off percentage)
- Add --dirstat=cumulative, replacing --cumulative
- Add --dirstat=files, replacing --dirstat-by-file
- Also add --dirstat=changes and --dirstat=noncumulative for specifying the
current default behavior. These allow the user to reset other --dirstat
parameters (e.g. 'cumulative' and 'files') occuring earlier on the
command line.
The deprecated options (--cumulative and --dirstat-by-file) are still
functional, although they have been removed from the documentation.
Allow multiple parameters to be separated by commas, e.g.:
--dirstat=files,10,cumulative
Update the documentation accordingly, and add testcases verifying the
behavior of the new syntax.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
* rr/doc-content-type:
Documentation: Allow custom diff tools to be specified in 'diff.tool'
Documentation: Add diff.<driver>.* to config
Documentation: Move diff.<driver>.* from config.txt to diff-config.txt
Documentation: Add filter.<driver>.* to config
Reading the diff-family and config man pages one may think that the
color.diff and color.ui settings apply to all diff commands. Make it
clearer that they do not apply to the plumbing variants
diff-{files,index,tree}.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide an environment variable GIT_PREFIX which contains the subdirectory
from which a !alias was called (i.e. 'git rev-parse --show-prefix') since
these cd to the to level directory before they are executed.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --count is used with --cherry-mark, omit the patch equivalent
commits from the count for left and right commits and print the count of
equivalent commits separately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark subcommand names as 'subcommand' to make them stand out.
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options '---use-log-author' and '--add-author-from' are applicable to other
subcommands except 'fetch' -- therefore move them from the 'fetch' section to
the more general 'options' section.
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option '--add-author-from' is used in 'commit-diff', 'set-tree', and
'dcommit' subcommands.
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Of the (now) three methods to send unmangled patches using Thunderbird,
this method is listed first because it provides a single-click on-demand
option rather than a permanent change of configuration like the other
two methods.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6abd933 (git-svn: allow the mergeinfo property to be set, 2010-09-24)
introduced the --mergeinfo option. Document it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for "cherry-pick -x" could be misread in the way that a
"git notes" object is attached to the new commit, which is not the case.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hints in SubmittingPatches about stopping GMail from clobbering
patches are widely useful both as examples of "git send-email" and
"git imap-send" usage.
Move the documentation to the appropriate places.
While at it, don't encourage storing passwords in config files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These hints are in git's private SubmittingPatches document but a
wider audience might be interested. Move them to the "git
format-patch" manpage.
I'm not sure what gotchas these hints are meant to work around.
They might be completely false.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard reference for this information is the article
"Plain text e-mail - Thunderbird#Completely_plain_email" at
kb.mozillazine.org, but the hints hidden away in git's
SubmittingPatches file are more complete. Move them to the
"git format-patch" manual so they can be installed with git and
read by a wide audience.
While at it, make some tweaks:
- update "Approach #1" so it might work with Thunderbird 3;
- remove ancient version numbers from the descriptions of both
approaches so current readers might have more reason to
complain if they don't work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SubmittingPatches has some excellent advice about how to check a patch
for corruption before sending it off. Move it to the format-patch
manual so it can be installed with git's documentation for use by
people not necessarily interested in the git project's practices.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a DISCUSSION section to the "git format-patch" manual to encourage
people to send patches in a form that can be applied by "git am"
automatically. There are two such forms:
1. The default form in which most metadata goes in the mail header
and the message body starts with the patch description;
2. The snipsnip form in which a message starts with pertinent
discussion and ends with a patch after a "scissors" mark.
The example requires QP encoding in the "Subject:" header intended for
the mailer to give the reader a chance to reflect on that, rather than
being startled by it later. By contrast, in-body "From:" and
"Subject:" lines should be human-readable and not QP encoded.
Inspired-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure the text of git-merge-base to better explain more clearly
the different modes of operation.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike plain merge-base, merge-base --octopus only requires at least one
commit argument; update the synopsis to reflect that.
Add a sentence to the discussion that when --octopus is used, we do expect
'2' (the common ansestor across all) as the result.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local value of the config variable tar.umask is not passed to the
other side with --remote. We may want to change that, but for now just
document this fact.
Reported-by: Jacek Masiulaniec <jacek.masiulaniec@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a spurious empty line which prevented asciidoc from recognizing a
list continuation mark ('+'), so that it does not get output literally any
more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.
Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.
Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a testcase documenting the current behavior.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the 'remote.<name>.pushurl' config key for git remotes,
'pushurl' is designed to be used in cases where 'url' points to an SVN
repository via a read-only transport, to provide an alternate
read/write transport. It is assumed that both keys point to the same
repository.
The 'pushurl' key is distinct from the 'commiturl' key in that
'commiturl' is a full svn path while 'pushurl' (like 'url') is a base
path. 'commiturl' takes precendece over 'pushurl' in cases where
either might be used.
The 'pushurl' is used by git-svn's dcommit and branch commands.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Reviewed-by: James Y Knight <jknight@itasoftware.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Support ":/" magic string that can be prefixed to a pathspec element to
say "this names the path from the top-level of the working tree", when
you are in the subdirectory.
For example, you should be able to say:
$ edit Makefile ;# top-level
$ cd Documentation
$ edit git.txt ;# in the subdirectory
and then do one of three things, still inside the subdirectory:
$ git add -u . ;# add only Documentation/git.txt
$ git add -u :/ ;# add everything, including paths outside Documentation
$ git add -u ;# whatever the default setting is.
To truly support magic pathspec, the API needs to be restructured so that
get_pathspec() and init_pathspec() are unified into one call. Currently,
the former just prefixes the user supplied pathspec with the current
subdirectory path, and the latter takes the output from the former and
pre-parses them into a bit richer structure for easier handling. They
should become a single API function that takes the current subdirectory
path and the remainder of argv[] (after parsing --options and revision
arguments from the command line) and returns an array of parsed pathspec
elements, and "magic" should become attributes of struct pathspec_item.
This patch implements only "top" magic because it can be hacked into the
system without such a refactoring.
The syntax for magic pathspec prefix is designed to be extensible yet
simple to type to invoke a simple magic like "from the top". The parser
for the magic prefix is hooked into get_pathspec() function in this patch,
and it needs to be moved when we refactor the API.
But we have to start from somewhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apart from the list of "valid values", 'diff.tool' can take any value,
provided there is a corresponding 'difftool.<tool>.cmd' option. Also,
describe this option just before the 'difftool.*' options.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the gitattributes page contains comprehensive information
about these configuration options, they should be included in the
config documentation for completeness.
It may be better to rename the "driver" in "diff.<driver>.*" to
something like "content type" or "file type", but for now, let's keep
it consistent across this part of the documentation and the original
description in the gitattributes documentation.
Helped-by: Jakub Narebski <jnareb@gmail.com>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the gitattributes page contains comprehensive information
about these configuration options, they should be included in the
config documentation for completeness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-reverse-doc:
git-log.txt,rev-list-options.txt: put option blocks in proper order
git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting
* jk/maint-remote-mirror-safer:
remote: deprecate --mirror
remote: separate the concept of push and fetch mirrors
remote: disallow some nonsensical option combinations
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user sets config.abbrev option, use it as if --abbrev was given. This
is the default value and user can override different abbrev length by
specifying the --abbrev=N command line option.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
By default git submodule update runs a simple checkout on submodules that
are not up-to-date. If the submodules contains modified or untracked
files, the command may exit sanely with an error:
$ git submodule update
error: Your local changes to the following files would be overwritten by
checkout:
file
Please, commit your changes or stash them before you can switch branches.
Aborting
Unable to checkout '1b69c6e55606b48d3284a3a9efe4b58bfb7e8c9e' in
submodule path 'test1'
In order to reset a whole git submodule tree, a user has to run first 'git
submodule foreach --recursive git checkout -f' and then run 'git submodule
update'.
This patch adds a --force option for the update command (only used for
submodules without --rebase or --merge options). It passes the --force
option to git checkout which will throw away the local changes.
Signed-off-by: Nicolas Morey-Chaisemartin <nmorey@kalray.eu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 1.7.4.3 has backmerged a handful of fixes from the master,
drop these entries from 1.7.5 release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reviewing a patch while concentrating primarily on the text after
then change, wading through pages of deleted text involves a cognitive
burden.
Introduce the -D option that omits the preimage text from the patch output
for deleted files. When used with -B (represent total rewrite as a single
wholesale deletion followed by a single wholesale addition), the preimage
text is also omitted.
To prevent such a patch from being applied by mistake, the output is
designed not to be usable by "git apply" (or GNU "patch"); it is strictly
for human consumption.
It of course is possible to "apply" such a patch by hand, as a human can
read the intention out of such a patch. It however is impossible to apply
such a patch even manually in reverse, as the whole point of this option
is to omit the information necessary to do so from the output.
Initial request by Mart Sõmermaa, documentation and tests helped by
Michael J Gruber.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying pack-objects plumbing command still needs an explicit
option from the command line, but these days Porcelain passes the
option, so there is no need for end users to worry about it anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/merge-sans-branch:
merge: merge with the default upstream branch without argument
merge: match the help text with the documentation
Conflicts:
builtin/merge.c
Earlier f98fd43 (git-log.txt,rev-list-options.txt: put option blocks in
proper order, 2011-03-08) moved the text around in the documentation for
options in the rev-list family of commands such as "log". Consequently,
the description of the --cherry-pick option appears way above the
description of the --left-right option now.
But the description of the --cherry-pick option still refers to the
example for the --left-right option, like this:
... with --left-right, like the example ABOVE in the description of
that option.
Rephrase it to clarify that we are making a forward reference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the reader has to parse a textual description in order to
find a specific syntax in the list.
Restructure as a labelled list with systematic labels as well as
concrete examples as a visual guide.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our use of quotes is inconsistent everywhere and within some files.
Before reworking the structure of revisions.txt, make the quotes
consistent:
`git command`
'some snippet or term'
The former gets typeset as code, the latter with some form of emphasis.
the man backend uses two types of emphasis.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn mkdirs" (which creates empty directories in the current
working copy) can be very slow and is often unnecessary. Provide a
config file option "svn-remote.<name>.automkdirs" that prevents empty
directories from being created automatically. (They are still created
if "git svn mkdirs" is invoked explicitly.)
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_INDEX_FILE variable we get from git has the full
path to the repo, which may contain spaces. When we use it
in our shell snippet, it needs to be quoted.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a merge module_list returns conflicting submodules several times
(stage 1,2,3) which caused the submodules to be used multiple times in
git submodule init, sync, update and status command.
There are 5 callers of module_list; they all read (mode, sha1, stage,
path) tuple, and most of them care only about path. As a first level
approximation, it should be Ok (in the sense that it does not make things
worse than it currently is) to filter the duplicate paths from module_list
output, but some callers should change their behaviour when the merge in
the superproject still has conflicts.
Notice the higher-stage entries, and emit only one record from
module_list, but while doing so, mark the entry with "U" (not [0-3]) in
the $stage field and null out the SHA-1 part, as the object name for the
lowest stage does not give any useful information to the caller, and this
way any caller that uses the object name would hopefully barf. Then
update the codepaths for each subcommands this way:
- "update" should not touch the submodule repository, because we do not
know what commit should be checked out yet.
- "status" reports the conflicting submodules as 'U000...000' and does
not recurse into them (we might later want to make it recurse).
- The command called by "foreach" may want to do whatever it wants to do
by noticing the merged status in the superproject itself, so feed the
path to it from module_list as before, but only once per submodule.
- "init" and "sync" are unlikely things to do while the superproject is
still not merged, but as long as a submodule is there in $path, there
is no point skipping it. It might however want to take the merged
status of .gitmodules into account, but that is outside of the scope of
this topic.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
The configuration created by plain --mirror is dangerous and
useless, and we now have --mirror=fetch and --mirror=push to
replace it. Let's warn the user.
One alternative to this is to try to guess which type the
user wants. In a non-bare repository, a fetch mirror doesn't
make much sense, since it would overwrite local commits. But
in a bare repository, you might use either type, or even
both (e.g., if you are acting as an intermediate drop-point
across two disconnected networks).
So rather than try for complex heuristics, let's keep it
simple. The user knows what they're trying to do, so let
them tell us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
[remote "mirror"]
url = wherever
fetch = +refs/*:refs/*
mirror = true
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "notes add" (without -f/--force) will abort when the given object
already has existing notes. This makes sense for the modes of "git notes add"
that would necessarily overwrite the old message (when using the -m/-F/-C/-c
options). However, when no options are given (meaning the notes are created
from scratch in the editor) it is not very user-friendly to abort on existing
notes, and forcing the user to run "git notes edit".
Instead, it is better to simply "redirect" to "git notes edit" automatically,
i.e. open the existing notes in the editor and let the user edit them.
This patch does just that.
This changes the behavior of "git notes add" without options when notes
already exist for the given object, but I doubt that many users really depend
on the previous failure from "git notes add" in this case.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the order to 1/0 to have the same true/false order as the rest
of the possibilities for a boolean variable in order not not confuse
users.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the behavior or the new --notes, --notes=<ref> and --no-notes
options, and list --show-notes[=<ref>] and --[no-]standard-notes options
as deprecated.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... with help from Eric Raible.
In addition, describe the use of GIT_COMMITTER_DATE more comprehensively
by including "date-formats.txt"
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a synonym for the existing '-n' option, matching GNU grep.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
"git merge" without specifying any commit is a no-op by default.
A new option merge.defaultupstream can be set to true to cause such an
invocation of the command to merge the upstream branches configured for
the current branch by using their last observed values stored in their
remote tracking branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Clarify "string of unsigned bytes";
* Blob has two variants (regular file vs symlink), not (blob vs symlink);
* Clarify permission mode bits;
* Clarify ce_namelen() "too long to fit in the length field" case;
* Clarify "." etc are forbidden as path components;
* Match the description with the internal wording "cache-tree";
* All types of extension begin with signature and length as explained in
the first part. Don't repeat the "length" part in the description of
each extension (can be mistaken as if there is a separate 32-bit size
field inside the extension), but state what the signature for each
extension is.
* Don't say "Extension tag", as we have said "Extension signature" in the
first part---be consistent;
* Clarify the invalidation of cache-tree entries;
* Correct description on subtree_nr field in the cache-tree;
* Clarify the order of entries in cache-tree;
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds test for "--merges" and "--no-merges" which we did not
have so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
'git am --abort' is around for quite a long time now, and users should
normally not poke around inside the .git directory, yet the
documentation of 'git am' still recommends the following:
... if you decide to start over from scratch,
run `rm -f -r .git/rebase-apply` ...
Suggest 'git am --abort' instead.
It's not quite the same as the original, because 'git am --abort' will
restore the original branch, while simply removing '.git/rebase-apply'
won't, but that's rather a thinko in the original wording, because
that won't actually "start over _from scratch_".
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.4.2
Work around broken ln on solaris as used in t8006
t/README: Add a note about running commands under valgrind
* mg/rev-list-n-reverse-doc:
git-log.txt,rev-list-options.txt: put option blocks in proper order
git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's more or less standard that synopsis is followed by description,
then options.
This is not just a clean move though:
- The paragraphs are realigned a bit
- The text mentioning git-init-db is dropped. init-db is
deprecated, no need to confuse new users
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove entries for fixes that are already present in the
maintenance track.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
Give an example on how to bisect when older revisions need a hot-fix to
build, run or test. Triggered by the binutils/kernel issue at
http://thread.gmane.org/gmane.comp.gnu.binutils/52601/focus=1112779
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Streamline the presentation of "bisect run" by removing one example
which does not introduce new concepts.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/doc-credits' of git://github.com/peff/git:
docs: point git.txt author credits to git-scm.com
doc: add missing git footers
doc: drop author/documentation sections from most pages
This change makes it clearer that the change to the history effected by
executing 'git rebase master' while on 'topic' branch, and by executing
'git rebase master topic' on any branch, will be the same; the implicit
checkout of the second form will remain after the rebase exits.
Signed-off-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a nice shortlog-ish output of the authors there. We
also point people directly to shortlog, but of course they
might be reading the documentation online or from a binary
package of git.
The default of 7 comes from fairly early in git development, when
seven hex digits was a lot (it covers about 250+ million hash
values). Back then I thought that 65k revisions was a lot (it was what
we were about to hit in BK), and each revision tends to be about 5-10
new objects or so, so a million objects was a big number.
These days, the kernel isn't even the largest git project, and even
the kernel has about 220k revisions (_much_ bigger than the BK tree
ever was) and we are approaching two million objects. At that point,
seven hex digits is still unique for a lot of them, but when we're
talking about just two orders of magnitude difference between number
of objects and the hash size, there _will_ be collisions in truncated
hash values. It's no longer even close to unrealistic - it happens all
the time.
We should both increase the default abbrev that was unrealistically
small, _and_ add a way for people to set their own default per-project
in the git config file.
This is the first step to first make it configurable; the default of 7
is not raised yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
This reverts commit 72a5b561fc, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the order of the description to the one in which they get applied:
commit limiting
commit ordering
commit formatting
diff options
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix typo in t/README
ls-remote documentation: <refs> argument is optional
Add Author and Documentation sections to git-for-each-ref.txt
Documentation: remove redundant colons in git-for-each-ref.txt
At the porcelain level, because by definition there are many more contributors
than integrators, it makes sense to give a handy short-hand for --right-only
used with --cherry-mark and --no-merges. Make it so.
In other words, this provides "git cherry with rev-list interface".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the --recurse-submodules option with fetch and pull might not always
fetch all the submodule commits the user expects, as this will only work
when the submodule is already checked out. Document that and warn that
this is expected to change in the future.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for submodules where new commits have been recorded in the
superproject ignore those cases where the submodules commits are already
present locally. This can happen e.g. when the submodule has been rewound
to an earlier state. Then there is no need to fetch the submodule again
as the commit recorded in the newly fetched superproject commit has
already been fetched earlier into the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the behavior of fetch and pull can be configured to the recently added
'on-demand' mode separately for each submodule too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To enable the user to change the default behavior of "git fetch" and "git
pull" regarding submodule recursion add the new "on-demand" value which
has just been added to the "--recurse-submodules" command line option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 47afed5 (SubmittingPatches: itemize and reflect upon well written
changes, 2009-04-28) added a discussion on the contents of the commit log
message, but the last part of the new paragraph didn't make much sense.
Reword it slightly to make it more readable.
Update the "quicklist" to clarify what we mean by "motivation" and
"contrast". Also mildly discourage external references.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description was unclear if -c or --cc was the default (--cc is for
some commands), and incorrectly implied that the default applies to
all the diff generating commands.
Most importantly, "log" does not default to "--cc" (it defaults to
"--no-merges") and "log -p" obeys the user's wish to see non-combined
format. Only "diff" (during merge and three-blob comparison) and
"show" use --cc as the default.
Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are applied after commit ordering and formatting options, in
particular --reverse.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-apply accepts the --cached option, not --cache.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere forget is a destructive command. When invoked without a path, it
operates on the current directory, potentially deleting many recorded
conflict resolutions.
To make the command safer, a path must be specified as of git 1.8.0. Until
then, give users time to write 'git rerere forget .' if they really mean
the entire current directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'svn-fe' of git://repo.or.cz/git/jrn: (31 commits)
fast-import: make code "-Wpointer-arith" clean
vcs-svn: teach line_buffer about temporary files
vcs-svn: allow input from file descriptor
vcs-svn: allow character-oriented input
vcs-svn: add binary-safe read function
t0081 (line-buffer): add buffering tests
vcs-svn: tweak test-line-buffer to not assume line-oriented input
tests: give vcs-svn/line_buffer its own test script
vcs-svn: make test-line-buffer input format more flexible
vcs-svn: teach line_buffer to handle multiple input files
vcs-svn: collect line_buffer data in a struct
vcs-svn: replace buffer_read_string memory pool with a strbuf
vcs-svn: eliminate global byte_buffer
fast-import: add 'ls' command
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
...
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
* uk/checkout-ambiguous-ref:
Rename t2019 with typo "amiguous" that meant "ambiguous"
checkout: rearrange update_refs_for_switch for clarity
checkout: introduce --detach synonym for "git checkout foo^{commit}"
checkout: split off a function to peel away branchname arg
checkout: fix bug with ambiguous refs
Conflicts:
builtin/checkout.c
