Update fsck.skipList implementation and documentation.
* ab/fsck-skiplist:
fsck: support comments & empty lines in skipList
fsck: use oidset instead of oid_array for skipList
fsck: use strbuf_getline() to read skiplist file
fsck: add a performance test for skipList
fsck: add a performance test
fsck: document that skipList input must be unabbreviated
fsck: document and test commented & empty line skipList input
fsck: document and test sorted skipList input
fsck tests: add a test for no skipList input
fsck tests: setup of bogus commit object
"git multi-pack-index" learned to detect corruption in the .midx
file it uses, and this feature has been integrated into "git fsck".
* ds/multi-pack-verify:
fsck: verify multi-pack-index
multi-pack-index: report progress during 'verify'
multi-pack-index: verify object offsets
multi-pack-index: fix 32-bit vs 64-bit size check
multi-pack-index: verify oid lookup order
multi-pack-index: verify oid fanout order
multi-pack-index: verify missing pack
multi-pack-index: verify packname order
multi-pack-index: verify corrupt chunk lookup table
multi-pack-index: verify bad header
multi-pack-index: add 'verify' verb
Split Documentation/config.txt for easier maintenance.
* nd/config-split:
config.txt: move submodule part out to a separate file
config.txt: move sequence.editor out of "core" part
config.txt: move sendemail part out to a separate file
config.txt: move receive part out to a separate file
config.txt: move push part out to a separate file
config.txt: move pull part out to a separate file
config.txt: move gui part out to a separate file
config.txt: move gitcvs part out to a separate file
config.txt: move format part out to a separate file
config.txt: move fetch part out to a separate file
config.txt: follow camelCase naming
The recently-introduced "core.alternateRefsCommand" allows callers to
specify with high flexibility the tips that they wish to advertise from
alternates. This flexibility comes at the cost of some inconvenience
when the caller only wishes to limit the advertisement to one or more
prefixes.
For example, to advertise only tags, a caller using
'core.alternateRefsCommand' would have to do:
$ git config core.alternateRefsCommand ' \
f() { git -C "$1" for-each-ref \
refs/tags --format="%(objectname)" }; f "$@"'
The above is cumbersome to write, so let's introduce a
"core.alternateRefsPrefixes" to address this common case. Instead, the
caller can run:
$ git config core.alternateRefsPrefixes 'refs/tags'
Which will behave identically to the longer example using
"core.alternateRefsCommand".
Since the value of "core.alternateRefsPrefixes" is appended to 'git
for-each-ref' and then executed, include a "--" before taking the
configured value to avoid misinterpreting arguments as flags to 'git
for-each-ref'.
In the case that the caller wishes to specify multiple prefixes, they
may separate them by whitespace. If "core.alternateRefsCommand" is set,
it will take precedence over "core.alternateRefsPrefixes".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When in a repository containing one or more alternates, Git would
sometimes like to list references from those alternates. For example,
'git receive-pack' lists the "tips" pointed to by references in those
alternates as special ".have" references.
Listing ".have" references is designed to make pushing changes from
upstream to a fork a lightweight operation, by advertising to the pusher
that the fork already has the objects (via its alternate). Thus, the
client can avoid sending them.
However, when the alternate (upstream, in the previous example) has a
pathologically large number of references, the initial advertisement is
too expensive. In fact, it can dominate any such optimization where the
pusher avoids sending certain objects.
Introduce "core.alternateRefsCommand" in order to provide a facility to
limit or filter alternate references. This can be used, for example, to
filter out references the alternate does not wish to send (for space
concerns, or otherwise) during the initial advertisement.
Let the repository that has alternates configure this command to avoid
trusting the alternate to provide us a safe command to run in the shell.
To find the alternate, pass its absolute path as the first argument.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sample code calls `get_revision()' followed by `graph_update()',
but the documentation and source code indicate that `get_revision()'
already calls `graph_update()' for you.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the following guideline to Documentation/CodingGuidelines:
Break overlong lines after "&&", "||", and "|", not before
them; that way the command can continue to subsequent lines
without backslash at the end.
And the following to t/README (since it is specific to writing tests):
Pipes and $(git ...) should be avoided when they swallow exit
codes of Git processes
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recognize -r and --recursive as synonyms for --max-depth=-1 for
compatibility with GNU grep; it's still the default for git grep.
This also adds --no-recursive as synonym for --max-depth=0 for free,
which is welcome for completeness and consistency.
Fix the description for --max-depth, while we're at it -- negative
values other than -1 actually disable recursion, i.e. they are
equivalent to --max-depth=0.
Requested-by: Christoph Berg <myon@debian.org>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Initial-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you type "git help" (or just "git") you are greeted with a list
with commonly used commands and their short description and are
suggested to use "git help -a" or "git help -g" for more details.
"git help -av" would be more friendly and inline with what is shown
with "git help" since it shows list of commands with description as
well, and commands are properly grouped.
"help -av" does not show everything "help -a" shows though. Add
external command section in "help -av" for this. While at there, add a
section for aliases as well (until now aliases have no UI, just "git
config").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document for uploadpack.packObjectsHook is added in [1] and consists
of two paragraphs, the second one is quite important about where this
variable can stay.
When the paragraph about uploadpack.allowFilter is added in [2], it's
added in between the two paragraphs. This makes the "this is non-repo
level config" note incorrectly apply to allowFilter instead of
packObjectsHook. Move allowFilter paragraph down to fix this.
[1] 20b20a22f8 (upload-pack: provide a hook for running pack-objects -
2016-05-18)
[2] 10ac85c785 (upload-pack: add object filtering for partial clone -
2017-12-08)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mailing list archive can help a user encountering a bug to tell
whether a recent regression has already been reported and whether a
longstanding bug has already had some discussion to start their
thinking.
Based-on-patch-by: Martin Ågren <martin.agren@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes it harder to let the API description and the reality drift
apart if the doc is kept close to the implementation or the header
of the API. We have been slowly migrating API docs out of the
Documentation/technical/api-* to *.h files, and the development
community generally considers that how inline docs in strbuf.h is
done the best current practice.
We recommend documenting in the header over documenting near the
implementation to encourage people to write the docs that are
readable without peeking at the implemention.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file processed by `git commit-graph` is referred to as the
"commit-graph file", also with a dash. We have a few references to the
"commit graph file", though, without the dash. These occur in
git-commit-graph.txt as well as in Doc/technical/commit-graph.txt. Fix
them.
Do not change the references to the "commit graph" (without "... file")
as a data structure.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This document sometimes refers to the "commit-graph file" as just "the
graph file". This saves a couple of words here and there at the risk of
confusion. In particular, the documentation for `git commit-graph read`
appears to suggest that there are indeed different types of graph files.
Let's just write out the full name everywhere.
The full name, by the way, is not the dash-less "commit graph file".
Use the dashed form. (The next commit will fix the remaining few
instances of the "commit graph file" in this document.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we're here, fix an instance of "folder" to be "directory".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a couple of bullet items which span multiple lines, and where we
have prefixed each line with a `*`. (This might be the result of a text
editor trying to help.) This results in each line being typeset as a
separate bullet item. Drop the extra `*`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitcredentials documentation implied that the config file's
"pattern" URL might include a path component, but did not explain that
it must match exactly (potentially leaving readers with the false hope
that it would support a more flexible prefix match).
Signed-off-by: David Zych <dmrz@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 2.19.1
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
"git update-ref" learned to make both "--no-deref" and "--stdin"
work at the same time.
* en/update-ref-no-deref-stdin:
update-ref: allow --no-deref with --stdin
update-ref: fix type of update_flags variable to match its usage
A new variant repo_diff_setup() is added that takes 'struct repository *'
and diff_setup() becomes a thin macro around it that is protected by
NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_....
The plan is these macros will always be defined for all library files
and the macros are only accessible in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caption uses the term "human readable", but the DESCRIPTION did
not explain this in context.
Signed-off-by: Frederick Eaton <frederik@ofb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I read this man page I couldn't figure out what kind of input it
was referring to, or how input was being put into columns, or where I
should look for the syntax of the --mode option.
Signed-off-by: Frederick Eaton <frederik@ofb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Is it a CPU architecture? Is it Arch Linux? If you search for "arch
repository", nothing relevant comes up. Let's call it GNU Arch so
people can find it with search engines.
Signed-off-by: Frederick Eaton <frederik@ofb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
This is a backward incompatible change but in a good way; it may
still need to be treated carefully.
* ab/fetch-tags-noclobber:
fetch doc: correct grammar in --force docs
push doc: add spacing between two words
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
config doc: add missing list separator for checkout.optimizeNewBranch
Rather than saying "(see: above)", drop the colon. Also drop the comma
before this note.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`, 2018-04-18) we have a more modern way of spelling
`--bool`.
Update all instances except those that explicitly document the
"historical options" in git-config.txt. The other old-style
type-specifiers already seem to be gone except for in that list of
historical options.
Tweak the grammar a little in config.txt while we are there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a grammar error (saying "the receiving" made no sense) in the
recently landed documentation added in my 0bc8d71b99 ("fetch: stop
clobbering existing tags without --force", 2018-08-31) by rephrasing
the sentence. Also correct 'fetching work the same way' by s/work/&s/;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a formatting error introduced in my recently landed
fe802bd21e ("push doc: correct lies about how push refspecs work",
2018-08-31).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation added in fa655d8411 ("checkout: optimize "git
checkout -b <new_branch>"", 2018-08-16) didn't add the double-colon
needed for the labeled list separator, as a result the added
documentation all got squashed into one paragraph. Fix that by adding
the list separator.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
* ab/fetch-tags-noclobber:
fetch: stop clobbering existing tags without --force
fetch: document local ref updates with/without --force
push doc: correct lies about how push refspecs work
push doc: move mention of "tag <tag>" later in the prose
push doc: remove confusing mention of remote merger
fetch tests: add a test for clobbering tag behavior
push tests: use spaces in interpolated string
push tests: make use of unused $1 in test description
fetch: change "branch" to "reference" in --force -h output
Fix a bug in which the same path could be registered under multiple
worktree entries if the path was missing (for instance, was removed
manually). Also, as a convenience, expand the number of cases in
which --force is applicable.
* es/worktree-forced-ops-fix:
doc-diff: force worktree add
worktree: delete .git/worktrees if empty after 'remove'
worktree: teach 'remove' to override lock when --force given twice
worktree: teach 'move' to override lock when --force given twice
worktree: teach 'add' to respect --force for registered but missing path
worktree: disallow adding same path multiple times
worktree: prepare for more checks of whether path can become worktree
worktree: generalize delete_git_dir() to reduce code duplication
worktree: move delete_git_dir() earlier in file for upcoming new callers
worktree: don't die() in library function find_worktree()
Dev doc update.
* jk/diff-rendered-docs:
Revert "doc/Makefile: drop doc-diff worktree and temporary files on "make clean""
doc/Makefile: drop doc-diff worktree and temporary files on "make clean"
doc-diff: add --clean mode to remove temporary working gunk
doc-diff: fix non-portable 'man' invocation
doc-diff: always use oids inside worktree
SubmittingPatches: mention doc-diff
Clarify a part of technical documentation for rerere.
* tg/rerere-doc-updates:
rerere: add note about files with existing conflict markers
rerere: mention caveat about unmatched conflict markers
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Lift code from GitHub to restrict delta computation so that an
object that exists in one fork is not made into a delta against
another object that does not appear in the same forked repository.
* cc/delta-islands:
pack-objects: move 'layer' into 'struct packing_data'
pack-objects: move tree_depth into 'struct packing_data'
t5320: tests for delta islands
repack: add delta-islands support
pack-objects: add delta-islands support
pack-objects: refactor code into compute_layer_order()
Add delta-islands.{c,h}
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
Fixes to "git rerere" corner cases, especially when conflict
markers cannot be parsed in the file.
* tg/rerere:
rerere: recalculate conflict ID when unresolved conflict is committed
rerere: teach rerere to handle nested conflicts
rerere: return strbuf from handle path
rerere: factor out handle_conflict function
rerere: only return whether a path has conflicts or not
rerere: fix crash with files rerere can't handle
rerere: add documentation for conflict normalization
rerere: mark strings for translation
rerere: wrap paths in output in sq
rerere: lowercase error messages
rerere: unify error messages when read_cache fails
When there are too many packfiles in a repository (which is not
recommended), looking up an object in these would require
consulting many pack .idx files; a new mechanism to have a single
file that consolidates all of these .idx files is introduced.
* ds/multi-pack-index: (32 commits)
pack-objects: consider packs in multi-pack-index
midx: test a few commands that use get_all_packs
treewide: use get_all_packs
packfile: add all_packs list
midx: fix bug that skips midx with alternates
midx: stop reporting garbage
midx: mark bad packed objects
multi-pack-index: store local property
multi-pack-index: provide more helpful usage info
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
...
Updated plan to repurpose the "-l" option to "git branch".
* jk/branch-l-1-repurpose:
doc/git-branch: remove obsolete "-l" references
branch: make "-l" a synonym for "--list"
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
checkout: optimize "git checkout -b <new_branch>"
The multi-pack-index builtin writes multi-pack-index files, and
uses a 'write' verb to do so. Add a 'verify' verb that checks this
file matches the contents of the pack-indexes it replaces.
The current implementation is a no-op, but will be extended in
small increments in later commits.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6f924265a0, which
started to require that we have an executable git available in order
to say "make clean", which gives us a chicken-and-egg problem.
Having to have Git installed, or be in a repository, in order to be
able to run an optional "doc-diff" tool is fine. Requiring either
in order to run "make clean" is a different story.
Reported by Jonathan Nieder <jrnieder@gmail.com>.
It's annoying not to be able to put comments and empty lines in the
skipList, when e.g. keeping a big central list of commits to skip in
/etc/gitconfig, which was my motivation for 1362df0d41 ("fetch:
implement fetch.fsck.*", 2018-07-27).
Implement that, and document what version of Git this was changed in,
since this on-disk format can be expected to be used by multiple
versions of git.
There is no notable performance impact from this change, using the
test setup described a couple of commits back:
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
1450.3: fsck with 0 skipped bad commits 7.69(7.27+0.42) 7.86(7.48+0.37) +2.2%
1450.5: fsck with 1 skipped bad commits 7.69(7.30+0.38) 7.83(7.47+0.36) +1.8%
1450.7: fsck with 10 skipped bad commits 7.76(7.38+0.38) 7.79(7.38+0.41) +0.4%
1450.9: fsck with 100 skipped bad commits 7.76(7.38+0.38) 7.74(7.36+0.38) -0.3%
1450.11: fsck with 1000 skipped bad commits 7.71(7.30+0.41) 7.72(7.34+0.38) +0.1%
1450.13: fsck with 10000 skipped bad commits 7.74(7.34+0.40) 7.72(7.34+0.38) -0.3%
1450.15: fsck with 100000 skipped bad commits 7.75(7.40+0.35) 7.70(7.29+0.40) -0.6%
1450.17: fsck with 1000000 skipped bad commits 7.12(6.86+0.26) 7.13(6.87+0.26) +0.1%
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the implementation of the skipList feature to use oidset
instead of oid_array to store SHA-1s for later lookup.
This list is parsed once on startup by fsck, fetch-pack or
receive-pack depending on the *.skipList config in use. I.e. only once
per invocation, but note that for "clone --recurse-submodules" each
submodule will re-parse the list, in addition to the main project, and
it will be re-parsed when checking .gitmodules blobs, see
fb16287719 ("fsck: check skiplist for object in fsck_blob()",
2018-06-27).
Memory usage is a bit higher, but we don't need to keep track of the
sort order anymore. Embed the oidset into struct fsck_options to make
its ownership clear (no hidden sharing) and avoid unnecessary pointer
indirection.
The cumulative impact on performance of this & the preceding change,
using the test setup described in the previous commit:
Test HEAD~2 HEAD~ HEAD
----------------------------------------------------------------------------------------------------------------
1450.3: fsck with 0 skipped bad commits 7.70(7.31+0.38) 7.72(7.33+0.38) +0.3% 7.70(7.30+0.40) +0.0%
1450.5: fsck with 1 skipped bad commits 7.84(7.47+0.37) 7.69(7.32+0.36) -1.9% 7.71(7.29+0.41) -1.7%
1450.7: fsck with 10 skipped bad commits 7.81(7.40+0.40) 7.94(7.57+0.36) +1.7% 7.92(7.55+0.37) +1.4%
1450.9: fsck with 100 skipped bad commits 7.81(7.42+0.38) 7.95(7.53+0.41) +1.8% 7.83(7.42+0.41) +0.3%
1450.11: fsck with 1000 skipped bad commits 7.99(7.62+0.36) 7.90(7.50+0.40) -1.1% 7.86(7.49+0.37) -1.6%
1450.13: fsck with 10000 skipped bad commits 7.98(7.57+0.40) 7.94(7.53+0.40) -0.5% 7.90(7.45+0.44) -1.0%
1450.15: fsck with 100000 skipped bad commits 7.97(7.57+0.39) 8.03(7.67+0.36) +0.8% 7.84(7.43+0.41) -1.6%
1450.17: fsck with 1000000 skipped bad commits 7.72(7.22+0.50) 7.28(7.07+0.20) -5.7% 7.13(6.87+0.25) -7.6%
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abbreviating the SHA-1s in the skipList input has never worked, but
the documentation hasn't unambiguously stated that this is an error,
and there was no test for it.
Let's fix both since it would be easy for some later refactoring
e.g. switch to accidentally switch to a looser OID parsing function,
causing the tests before this change to pass, but for older versions
of git to be incompatible with the new skipList format.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no comment syntax for the fsck.skipList, this isn't
really by design, and it would be nice to have support for comments.
Document that this doesn't work, and test for how this errors
out. These tests reveal a current bug, if there's invalid input the
output will emit some of the next line, and then go into uninitialized
memory. This is fixed in a subsequent change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the skipList support was first added in cd94c6f91 ("fsck:
git receive-pack: support excluding objects from fsck'ing",
2015-06-22) the documentation for the format has that the file is a
sorted list of object names.
Thus, anyone using the feature would have thought the list needed to
be sorted. E.g. I recently in conjunction with my fetch.fsck.*
implementation in 1362df0d41 ("fetch: implement fetch.fsck.*",
2018-07-27) wrote some code to ship a skipList, and went out of my way
to sort it.
Doing so seems intuitive, since it contains fixed-width records, and
has no support for comments, so one might expect it to be binary
searched in-place on-disk.
However, as documented here this was never a requirement, so let's
change the documentation. Since this is a file format change let's
also document what was said about this in the past, so e.g. someone
like myself reading the new docs can see this never needed to be
sorted ("why do I have all this code to sort this thing...").
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If passed both --no-deref and --stdin, update-ref would error out with a
general usage message that did not at all suggest these options were
incompatible. The manpage for update-ref did suggest through its
synopsis line that --no-deref and --stdin were incompatible, but it sadly
also incorrectly suggested that -d and --no-deref were incompatible. So
the help around the --no-deref option is buggy in a few ways.
The --stdin option did provide a different mechanism for avoiding
dereferencing symbolic-refs: adding a line reading
option no-deref
before every other directive in the input. (Technically, if the user
wants to do the extra work of first determining which refs they want to
update or delete are symbolic, then they only need to put the extra
"option no-deref" lines before the updates of those refs. But in some
cases, that's more work than just adding the "option no-deref" before
every other directive.)
It's easier to allow the user to just pass --no-deref along with --stdin
in order to tell update-ref that the user doesn't want any symbolic ref
to be dereferenced. It also makes the update-ref documentation simpler.
Implement that, and update the documentation to match.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the config documentation to note the value `2` as an acceptable
value for the protocol.version config.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We avoid re-creating our temporary worktree if it's already
there. But we may run into a situation where the worktree
has been deleted, but an entry still exists in
$GIT_DIR/worktrees.
Older versions of git-worktree would annoyingly create a
series of duplicate entries. Recent versions now detect and
prevent this, allowing you to override with "-f". Since we
know that the worktree in question was just our temporary
workspace, it's safe for us to always pass "-f".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current wording of the description of GIT_TRACE=/path/to/file
("... will try to write the trace messages into it") might be
misunderstood as "overwriting"; at least I interpreted it that way on
a cursory first read.
State it more explicitly that the trace messages are appended.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "fetch" to treat "+" in refspecs (aka --force) to mean we
should clobber a local tag of the same name.
This changes the long-standing behavior of "fetch" added in
853a3697dc ("[PATCH] Multi-head fetch.", 2005-08-20). Before this
change, all tag fetches effectively had --force enabled. See the
git-fetch-script code in fast_forward_local() with the comment:
> Tags need not be pointing at commits so there is no way to
> guarantee "fast-forward" anyway.
That commit and the rest of the history of "fetch" shows that the
"+" (--force) part of refpecs was only conceived for branch updates,
while tags have accepted any changes from upstream unconditionally and
clobbered the local tag object. Changing this behavior has been
discussed as early as 2011[1].
The current behavior doesn't make sense to me, it easily results in
local tags accidentally being clobbered. We could namespace our tags
per-remote and not locally populate refs/tags/*, but as with my
97716d217c ("fetch: add a --prune-tags option and fetch.pruneTags
config", 2018-02-09) it's easier to work around the current
implementation than to fix the root cause.
So this change implements suggestion #1 from Jeff's 2011 E-Mail[1],
"fetch" now only clobbers the tag if either "+" is provided as part of
the refspec, or if "--force" is provided on the command-line.
This also makes it nicely symmetrical with how "tag" itself works when
creating tags. I.e. we refuse to clobber any existing tags unless
"--force" is supplied. Now we can refuse all such clobbering, whether
it would happen by clobbering a local tag with "tag", or by fetching
it from the remote with "fetch".
Ref updates outside refs/{tags,heads/* are still still not symmetrical
with how "git push" works, as discussed in the recently changed
pull-fetch-param.txt documentation. This change brings the two
divergent behaviors more into line with one another. I don't think
there's any reason "fetch" couldn't fully converge with the behavior
used by "push", but that's a topic for another change.
One of the tests added in 31b808a032 ("clone --single: limit the fetch
refspec to fetched branch", 2012-09-20) is being changed to use
--force where a clone would clobber a tag. This changes nothing about
the existing behavior of the test.
1. https://public-inbox.org/git/20111123221658.GA22313@sigill.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refer to the new git-push(1) documentation about when ref updates are
and aren't allowed with and without --force, noting how "git-fetch"
differs from the behavior of "git-push".
Perhaps it would be better to split this all out into a new
gitrefspecs(7) man page, or present this information using tables.
In lieu of that, this is accurate, and fixes a big omission in the
existing refspec docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's complex rules governing whether a push is allowed to take
place depending on whether we're pushing to refs/heads/*, refs/tags/*
or refs/not-that/*. See is_branch() in refs.c, and the various
assertions in refs/files-backend.c. (e.g. "trying to write non-commit
object %s to branch '%s'").
This documentation has never been quite correct, but went downhill
after dbfeddb12e ("push: require force for refs under refs/tags/",
2012-11-29) when we started claiming that <dst> couldn't be a tag
object, which is incorrect. After some of the logic in that patch was
changed in 256b9d70a4 ("push: fix "refs/tags/ hierarchy cannot be
updated without --force"", 2013-01-16) the docs weren't updated, and
we've had some version of documentation that confused whether <src>
was a tag or not with whether <dst> would accept either an annotated
tag object or the commit it points to.
This makes the intro somewhat more verbose & complex, perhaps we
should have a shorter description here and split the full complexity
into a dedicated section. Very few users will find themselves needing
to e.g. push blobs or trees to refs/custom-namespace/* (or blobs or
trees at all), and that could be covered separately as an advanced
topic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change will be followed-up with a subsequent change where I'll
change both sides of this mention of "tag <tag>" to be something
that's best read without interruption.
To make that change smaller, let's move this mention of "tag <tag>" to
the end of the "<refspec>..." section, it's now somewhere in the
middle.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Saying that "git push <remote> <src>:<dst>" won't push a merger of
<src> and <dst> to <dst> is clear from the rest of the context here,
so mentioning it is redundant, furthermore the mention of "EXAMPLES
below" isn't specific or useful.
This phrase was originally added in 149f6ddfb3 ("Docs: Expand
explanation of the use of + in git push refspecs.", 2009-02-19), as
can be seen in that change the point of the example being cited was to
show that force pushing can leave unreferenced commits on the
remote. It's enough that we explain that in its own section, it
doesn't need to be mentioned here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc-diff creates a temporary working tree (git-worktree) and generates a
bunch of temporary files which it does not remove since they act as a
cache to speed up subsequent runs. Although doc-diff's working tree and
generated files are not strictly build products of the Makefile (which,
itself, never runs doc-diff), as a convenience, update "make clean" to
clean up doc-diff's working tree and generated files along with other
development detritus normally removed by "make clean".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of its operation, doc-diff creates a bunch of temporary
working files and holds onto them in order to speed up subsequent
invocations. These files are never deleted. Moreover, it creates a
temporary working tree (via git-wortkree) which likewise never gets
removed.
Without knowing the implementation details of the tool, a user may not
know how to clean up manually afterward. Worse, the user may find it
surprising and alarming to discover a working tree which s/he did not
create explicitly.
To address these issues, add a --clean mode which removes the
temporary working tree and deletes all generated files.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc-diff invokes 'man' with the -l option to force "local" mode,
however, neither MacOS nor FreeBSD recognize this option. On those
platforms, if the argument to 'man' contains a slash, it is
automatically interpreted as a file specification, so a "local"-like
mode is not needed. And, it turns out, 'man' which does support -l
falls back to enabling -l automatically if it can't otherwise find a
manual entry corresponding to the argument. Since doc-diff always
passes an absolute path of the nroff source file to 'man', the -l
option kicks in anyhow, despite not being specified explicitly.
Therefore, make the invocation portable to the various platforms by
simply dropping -l.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit switched "-l" to meaning "--list", but a
few vestiges of its prior meaning as "--create-reflog"
remained:
- the synopsis mentioned "-l" when creating a new branch;
we can drop this entirely, as it has been the default
for years
- the --list command mentions the unfortunate "-l"
confusion, but we've now fixed that
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The doc-diff script immediately resolves its two endpoints
to actual object ids, so that we can reuse cached results
even if they appear under a different name. But we still use
the original name the user fed us when running "git
checkout" in our temporary worktree. This can lead to
confusing results:
- the namespace inside the worktree is different than the
one outside. In particular, "./doc-diff origin HEAD"
will resolve HEAD inside the worktree, whose detached
HEAD will be pointing at origin! As a result, such a
diff would always be empty.
- worse, we will store this result under the oid we got by
resolving HEAD in the main worktree, thus polluting our
cache
- we didn't pass --detach, which meant that using a branch
name would cause us to actually check out that branch,
making it unavailable to other worktrees.
We can solve this by feeding the already-resolved object id
to git-checkout. That naturally forces a detached HEAD, but
just to make clear our expectation, let's explicitly pass
--detach.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency with "add -f -f" and "move -f -f" which override
the lock on a worktree, allow "remove -f -f" to do so, as well, as a
convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency with "add -f -f", which allows a missing but locked
worktree path to be re-used, allow "move -f -f" to override a lock,
as well, as a convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For safety, "git worktree add <path>" will refuse to add a new
worktree at <path> if <path> is already associated with a worktree
entry, even if <path> is missing (for instance, has been deleted or
resides on non-mounted removable media or network share). The typical
way to re-create a worktree at <path> in such a situation is either to
prune all "broken" entries ("git worktree prune") or to selectively
remove the worktree entry manually ("git worktree remove <path>").
However, neither of these approaches ("prune" nor "remove") is
especially convenient, and they may be unsuitable for scripting when a
tool merely wants to re-use a worktree if it exists or create it from
scratch if it doesn't (much as a tool might use "mkdir -p" to re-use
or create a directory).
Therefore, teach 'add' to respect --force as a convenient way to
re-use a path already associated with a worktree entry if the path is
non-existent. For a locked worktree, require --force to be specified
twice.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exact sed command to generate manpage-base-url.xsl appears in
the output, unlike the rules for other files that by default only
show summary.
Make the output for this rule similiar to all the other rules by
printing a short status message instead of the whole command.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file contains lines that look like conflict markers, 'git
rerere' may fail not be able to record a conflict resolution.
Emphasize that in the man page, and mention a possible workaround for
the issue.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4af3220 ("rerere: teach rerere to handle nested conflicts",
2018-08-05) introduced slightly better behaviour if the user commits
conflict markers and then gets another conflict in 'git rerere'.
However this is just a heuristic to punt on such conflicts better, and
doesn't deal with any unmatched conflict markers. Make that clearer
in the documentation.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git help --config" (which is used in command line completion)
missed the configuration variables not described in the main
config.txt file but are described in another file that is included
by it, which has been corrected.
* nd/complete-config-vars:
generate-cmdlist.sh: collect config from all config.txt files
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
The meaning of the possible values the "core.checkStat"
configuration variable can take were not adequately documented,
which has been fixed.
* nd/config-core-checkstat-doc:
config.txt: clarify core.checkStat
The core.commitGraph config setting was accidentally removed from
the config documentation. In that same patch, the config setting
that writes a commit-graph during garbage collection was incorrectly
written to the doc as "gc.commitGraph" instead of "gc.writeCommitGraph".
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even with the newly-tightened "---" parser, it's still
possible for a commit message to trigger a false positive if
it contains something like "--- foo". If the caller knows
that it has only a single commit message, it can now tell us
with the "--no-divider" option, eliminating any false
positives.
If we were designing this from scratch, I'd probably make
this the default. But we've advertised the "---" behavior in
the documentation since interpret-trailers has existed.
Since it's meant to be scripted, breaking that would be a
bad idea.
Note that the logic is in the underlying trailer.c code,
which is used elsewhere. The default there will keep the
current behavior, but many callers will benefit from setting
this new option. That's left for future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret-trailers command accepts not only raw commit
messages, but it also can manipulate trailers in
format-patch output. That means it must find the "---"
boundary separating the commit message from the patch.
However, it does so by looking for any line starting with
"---", regardless of whether there is further content.
This is overly lax compared to the parsing done in
mailinfo.c's patchbreak(), and may cause false positives
(e.g., t/perf output tables uses dashes; if you cut and
paste them into your commit message, it fools the parser).
We could try to reuse patchbreak() here, but it actually has
several heuristics that are not of interest to us (e.g.,
matching "diff -" without a three-dash separator or even a
CVS "Index:" line). We're not interested in taking in
whatever random cruft people may send, but rather handling
git-formatted patches.
Note that the existing documentation was written in a loose
way, so technically we are changing the behavior from what
it said. But this should implement the original intent in a
more accurate way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already advise people to make sure their documentation
formats correctly. Let's point them at the doc-diff script,
which can help with that.
Let's also put a brief note in the script about its purpose,
since that otherwise can only be found in the original
commit message. Along with the existing -h/usage text,
that's hopefully enough for developers to make use of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script uses Documentation/config.txt as input for "git help
--config" and "git config" completion but it misses the fact that
config.txt includes other txt files. Include all *config.txt as input
when scanning for config keys. This could produce false positives, but
as long as we stick to the blah-config.txt naming convention, we
should be ok.
While at there, move diff.* from config.txt to diff-config.txt where
all other diff config keys are.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As it exists right now, the commit-graph feature may provide
inconsistent results when combined with commit grafts, replace objects,
and shallow clones. Update the design document to discuss why these
interactions are difficult to reconcile and how we will avoid errors by
preventing updates to and reads from the commit-graph file when these
other features exist.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
The sideband code learned to optionally paint selected keywords at
the beginning of incoming lines on the receiving end.
* hn/highlight-sideband-keywords:
sideband: do not read beyond the end of input
sideband: highlight keywords in remote sideband output
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
After a partial clone, repeated fetches from promisor remote would
have accumulated many packfiles marked with .promisor bit without
getting them coalesced into fewer packfiles, hurting performance.
"git repack" now learned to repack them.
* jt/repack-promisor-packs:
repack: repack promisor objects if -a or -A is set
repack: refactor setup of pack-objects cmd
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
Documentation update.
* ab/newhash-is-sha256:
doc hash-function-transition: pick SHA-256 as NewHash
doc hash-function-transition: note the lack of a changelog
Add the '--quiet' option to git worktree, as for the other git
commands. 'add' is the only command affected by it since all other
commands, except 'list', are currently silent by default.
[jc: appiled trivial fix-up to keep the tests from touching outside
the scratch area]
Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The end result of documentation update has been made to be
inspected more easily to help developers.
* jk/diff-rendered-docs:
add a script to diff rendered documentation
Update to a few other topics around 'git fetch'.
* ab/fetch-nego:
fetch doc: cross-link two new negotiation options
negotiator: unknown fetch.negotiationAlgorithm should error out
The test performed at the receiving end of "git push" to prevent
bad objects from entering repository can be customized via
receive.fsck.* configuration variables; we now have gained a
counterpart to do the same on the "git fetch" side, with
fetch.fsck.* configuration variables.
* ab/fsck-transfer-updates:
fsck: test and document unknown fsck.<msg-id> values
fsck: add stress tests for fsck.skipList
fsck: test & document {fetch,receive}.fsck.* config fallback
fetch: implement fetch.fsck.*
transfer.fsckObjects tests: untangle confusing setup
config doc: elaborate on fetch.fsckObjects security
config doc: elaborate on what transfer.fsckObjects does
config doc: unify the description of fsck.* and receive.fsck.*
config doc: don't describe *.fetchObjects twice
receive.fsck.<msg-id> tests: remove dead code
The description of this key does not really tell what the 'minimal'
mode checks and does not check. The description for the 'default'
mode is not much better and just says 'all fields', which is unclear
and is not even correct (e.g. we do not look at 'atime').
Spell out what are and what are not checked under the 'minimal' mode
relative to the 'default' mode to help those who want to decide if
they want to use the 'minimal' mode, also taking information about
this mode from the commit message of c08e4d5b5c (Enable minimal stat
checking - 2013-01-22).
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip merging the commit, updating the index and working directory if and
only if we are creating a new branch via "git checkout -b <new_branch>."
Any other checkout options will still go through the former code path.
If sparse_checkout is on, require the user to manually opt in to this
optimzed behavior by setting the config setting checkout.optimizeNewBranch
to true as we will no longer update the skip-worktree bit in the index, nor
add/remove files in the working directory to reflect the current sparse
checkout settings.
For comparison, running "git checkout -b <new_branch>" on a large repo takes:
14.6 seconds - without this patch
0.3 seconds - with this patch
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for configuring default sort ordering for git branches. Command
line option will override this configured value, using the exact same
syntax.
Signed-off-by: Samuel Maftoul <samuel.maftoul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement simple support for --delta-islands option and
repack.useDeltaIslands config variable in git repack.
This allows users to setup delta islands in their config and
get the benefit of less disk usage while cloning and fetching
is still quite fast and not much more CPU intensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement support for delta islands in git pack-objects
and document how delta islands work in
"Documentation/git-pack-objects.txt" and Documentation/config.txt.
This allows users to setup delta islands in their config and
get the benefit of less disk usage while cloning and fetching
is still quite fast and not much more CPU intensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4 submit" learns to ask its own pre-submit hook if it should
continue with submitting.
* cb/p4-pre-submit-hook:
git-p4: add the `p4-pre-submit` hook
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
Teach "git tag -s" etc. a few configuration variables (gpg.format
that can be set to "openpgp" or "x509", and gpg.<format>.program
that is used to specify what program to use to deal with the format)
to allow x.509 certs with CMS via "gpgsm" to be used instead of
openpgp via "gnupg".
* hs/gpgsm:
gpg-interface t: extend the existing GPG tests with GPGSM
gpg-interface: introduce new signature format "x509" using gpgsm
gpg-interface: introduce new config to select per gpg format program
gpg-interface: do not hardcode the key string len anymore
gpg-interface: introduce an abstraction for multiple gpg formats
t/t7510: check the validation of the new config gpg.format
gpg-interface: add new config to select how to sign a commit
One of the "diff --color-moved" mode "dimmed_zebra" that was named
in an unusual way has been deprecated and replaced by
"dimmed-zebra".
* es/diff-color-moved-fix:
diff: --color-moved: rename "dimmed_zebra" to "dimmed-zebra"
Rendered documentation can be easier to read than raw text because
headings and emphasized phrases stand out. Add the missing markup and
Makefile rule required to render this design document using asciidoc.
Tested by running
make -C Documentation technical/partial-clone.html
and viewing the output in a browser.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of a range-diff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert a range-diff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --range-diff=<refspec>" to insert a
range-diff into the commentary section of a lone patch rather than
requiring a cover letter.
Implementation note: Generating a range-diff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the range-diff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating a range-diff, matching up commits between two version of
a patch series involves heuristics, thus may give unexpected results.
git-range-diff allows tweaking the heuristic via --creation-factor.
Follow suit by accepting --creation-factor in combination with
--range-diff when generating a range-diff for a cover-letter.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised a patch series, the --range-diff option embeds
a range-diff in the cover letter showing changes since the previous
version of the patch series. The argument to --range-diff is a simple
revision naming the tip of the previous series, which works fine if the
previous and current versions of the patch series share a common base.
However, it fails if the revision ranges of the old and new versions of
the series are disjoint. To address this shortcoming, extend
--range-diff to also accept an explicit revision range for the previous
series. For example:
git format-patch --cover-letter --range-diff=v1~3..v1 -3 v2
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of a range-diff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add a --range-diff option to automate this process. The argument to
--range-diff specifies the tip of the previous attempt against which to
generate the range-diff. For example:
git format-patch --cover-letter --range-diff=v1 -3 v2
(At this stage, the previous attempt and the patch series being
formatted must share a common base, however, a subsequent enhancement
will make it possible to specify an explicit revision range for the
previous attempt.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
