For x86 performance (especially in 32-bit mode) I added that hack to write
the SHA1 internal temporary hash using a volatile pointer, in order to get
gcc to not try to cache the array contents. Because gcc will do all the
wrong things, and then spill things in insane random ways.
But on architectures like PPC, where you have 32 registers, it's actually
perfectly reasonable to put the whole temporary array[] into the register
set, and gcc can do so.
So make the 'volatile unsigned int *' cast be dependent on a
SMALL_REGISTER_SET preprocessor symbol, and enable it (currently) on just
x86 and x86-64. With that, the routine is fairly reasonable even when
compared to the hand-scheduled PPC version. Ben Herrenschmidt reports on
a G5:
* Paulus asm version: about 3.67s
* Yours with no change: about 5.74s
* Yours without "volatile": about 3.78s
so with this the C version is within about 3% of the asm one.
And add a lot of commentary on what the heck is going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid git ending with this message:
"Patch format is not supported."
With improved error message in the format detection failure case by
Giuseppe Bilotta.
Signed-off-by: Nicolas Sebrecht <ni.s@laposte.net>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your name is, say, Üwë, you want your cover letters to appear
correctly. Convince format-patch to mark it as 8-bit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is useful outside of log-tree.c, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit() to stream data from Perforce and into fast-import
rather than reading into memory first, and then writing out. This
hugely reduces the memory requirements when cloning non-incrementally.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In new_http_object_request(), check ftruncate() call return value and
handle possible errors.
Signed-off-by: Jeff Lasslett <jeff.lasslett@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use preq->url in new_http_pack_request and freq->url in
new_http_object_request when calling curl_setopt(CURLOPT_URL), instead
of using an intermediate variable, 'url'.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free preq in new_http_pack_request when aborting. preq was allocated
before jumping to the 'abort' label so this is safe.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.bogomips.org/git-svn:
git-svn: ignore leading blank lines in svn:ignore
svn: Honor --prefix option in init without --stdlayout
svn: Add && to t9107-git-svn-migrate.sh
Subversion ignores all blank lines in svn:ignore properties. The old
git-svn code ignored blank lines everywhere except for the first line
of the svn:ignore property. This patch makes the "git svn
show-ignore" and "git svn create-ignore" commands ignore leading blank
lines, too.
Also include leading blank lines in the test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Most users who type
git svn init file:///tmp/repo --prefix=my-svn/
would expect the root of the svn repository to be tracked by
refs/remotes/my-svn/git-svn.
Acked-by: Eric Wong <normalperson@yhbt.net>
It was probably intended for the test to fail unless all of the
commands succeed.
[ew: fixed tests to actually work]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The script was looking for something that matched the '^our $gitbin'
regex, which no longer exists in gitweb.cgi.
Now it looks for 'MOD_PERL', which should be on the line that checks
to see if the script is running in a mod_perl environment.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an example to the stash documentation that shows how to quickly
find candidate commits among the 'git fsck --unreachable' output.
Unless you have merges of branch names containing WIP, or edit your
merge messages to say WIP, there will be no false positives.
Snippet written by Björn "doener" Steinbrink and me after zepolen_
asked on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously when merging directly from a local tracking
branch like:
git merge origin/master
The merge message said:
Merge commit 'origin/master'
* commit 'origin/master':
...
Instead, let's be more explicit about what we are merging:
Merge remote branch 'origin/master'
* origin/master:
...
We accomplish this by recognizing remote tracking branches
in git-merge when we build the simulated FETCH_HEAD output
that we feed to fmt-merge-msg.
In addition to a new test in t7608, we have to tweak the
expected output of t3409, which does such a merge.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have both a tag and a branch named "foo", then calling
"git merge foo" will warn about the ambiguous ref, but merge
the tag.
When generating the commit message, though, we simply
checked whether "refs/heads/foo" existed, and if it did,
assumed it was a branch. This led to the statement "Merge
branch 'foo'" in the commit message, which is quite wrong.
Instead, we should use dwim_ref to find the actual ref used,
and describe it appropriately.
In addition to the test in t7608, we must also tweak the
expected output of t4202, which was accidentally triggering
this bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git merge $X", we automatically generate a
commit message containing something like "Merge branch
'$X'". This test script checks that those messages say what
they should, and exposes a failure when merging a refname
that is ambiguous between a tag and a branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful if you want to specify GIT_TEST_OPTS that you
always use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests generate a large amount of I/O activity creating
and destroying repositories and files. We can improve the
time it takes to run the test suite by creating trash
directories on filesystems with better performance
characteristic, even though we may not want the rest of the
git repository on those filesystems (e.g., because they are
not network connected, or because they are temporary
ramdisks).
For example, on a dual processor system:
$ cd t && time make -j32
real 1m51.562s
user 0m59.260s
sys 1m20.933s
# /dev/shm is tmpfs
$ cd t && time make -j32 GIT_TEST_OPTS="--root=/dev/shm"
real 1m1.484s
user 0m53.555s
sys 1m5.264s
We almost halve the wall clock time, and we utilize the
dual processors much better.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most scripts don't care about the absolute path to the trash
directory. The one exception was t4014 script, which pieced
together $TEST_DIRECTORY and $test itself to get an absolute
directory.
Instead, let's provide a $TRASH_DIRECTORY which specifies
the same thing. This keeps the $test variable internal to
test-lib.sh and paves the way for trash directories in other
locations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $TEST_DIRECTORY variable allows tests to find the
top-level test directory regardless of the current working
directory.
In the past, this has been used to accomodate tests which
change directories, but it is also the first step to being
able to move trash directories outside of the
$TEST_DIRECTORY hierarchy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test for correct permissions after init created a deep directory
must be guarded by POSIXPERM. But testing that the deep dirctory exists
is good even on platforms that do not provide the POSIXPERM prerequiste.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, grep fails because it does not find the file
instead of because it does not find the text in the file.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think I have found a way to avoid the gcc crazyness.
Lookie here:
# TIME[s] SPEED[MB/s]
rfc3174 5.094 119.8
rfc3174 5.098 119.7
linus 1.462 417.5
linusas 2.008 304
linusas2 1.878 325
mozilla 5.566 109.6
mozillaas 5.866 104.1
openssl 1.609 379.3
spelvin 1.675 364.5
spelvina 1.601 381.3
nettle 1.591 383.6
notice? I outperform all the hand-tuned asm on 32-bit too. By quite a
margin, in fact.
Now, I didn't try a P4, and it's possible that it won't do that there, but
the 32-bit code generation sure looks impressive on my Nehalem box. The
magic? I force the stores to the 512-bit hash bucket to be done in order.
That seems to help a lot.
The diff is trivial (on top of the "rename registers with cpp" patch), as
appended. And it does seem to fix the P4 issues too, although I can
obviously (once again) only test Prescott, and only in 64-bit mode:
# TIME[s] SPEED[MB/s]
rfc3174 1.662 36.73
rfc3174 1.64 37.22
linus 0.2523 241.9
linusas 0.4367 139.8
linusas2 0.4487 136
mozilla 0.9704 62.9
mozillaas 0.9399 64.94
that's some really impressive improvement. All from just saying "do the
stores in the order I told you to, dammit!" to the compiler.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of letting the compiler to figure out the optimal way to rotate
register usage, explicitly rotate the register names with cpp.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is given, the command does not verify the pack contents,
but shows the delta chain histogram. If used with --verbose, the usual
list of objects is also shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint: (95 commits)
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
gitweb/README: Document $base_url
Documentation: git submodule: add missing options to synopsis
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
GIT 1.6.4
GIT 1.6.3.4
config.txt: document add.ignore-errors
request-pull: allow ls-remote to notice remote.$nickname.uploadpack
Update the documentation of the raw diff output format
git-rerere.txt: Clarify ambiguity of the config variable
t9143: do not fail if Compress::Zlib is missing
Trivial path quoting fixes in git-instaweb
GIT 1.6.4-rc3
Documentation/config.txt: a variable can be defined on the section header line
git svn: make minimize URL more reliable over http(s)
Disable asciidoc 8.4.1+ semantics for `{plus}` and friends
...
When making a histogram of delta chain length in the pack, the program
collects number of objects whose delta depth exceeds the MAX_CHAIN limit
in histogram[0], and showed it as the number of items that exceeds the
limit correctly. HOWEVER, it also showed the same number labeled as
"chain length = 0".
In fact, we are not showing the number of objects whose chain length is
zero, i.e. the base objects. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test ignored the exit status from verify pack command, and also relied
on not seeing any delta chain statistics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid git ending with this message:
"Patch format is not supported."
With improved error message in the format detection failure case by
Giuseppe Bilotta.
Signed-off-by: Nicolas Sebrecht <ni.s@laposte.net>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The XZ compression format uses the LZMA2 compression algorithm, which
often yields higher compression ratios than both GZip and BZip2 at the
cost of using more CPU time and RAM. XZ is the slowest for compression,
but still much faster than BZip2 for decompression, almost comparable
to GZip (see benchmarks below).
Some simple benchmarks show the pros and cons of using XZ compression;
starting with an already tarball'd archive of the repos listed below.
Memory usage seemed to be consistent for any given algorithm at their
respective default compression levels.
CPU: AMD Sempron 3400+ (1 core @ 1.8GHz with 256K L2 cache)
Virtual Memory Usage
GZip: 4152K BZip2: 13352K XZ: 102M
Linux 2.6 series (f5886c7f96f2542382d3a983c5f13e03d7fc5259) 349M
gzip 23.70s user 0.47s system 99% cpu 24.227 total 76M
gunzip 3.74s user 0.74s system 94% cpu 4.741 total
bzip2 130.96s user 0.53s system 99% cpu 2:11.97 total 59M
bunzip2 31.05s user 1.02s system 99% cpu 32.355 total
xz 448.78s user 0.91s system 99% cpu 7:31.28 total 51M
unxz 7.67s user 0.80s system 98% cpu 8.607 total
Git (0a53e9ddea) 11M
gzip 0.77s user 0.03s system 99% cpu 0.792 total 2.5M
gunzip 0.12s user 0.02s system 98% cpu 0.142 total
bzip2 3.42s user 0.02s system 99% cpu 3.454 total 2.1M
bunzip2 0.95s user 0.03s system 99% cpu 0.984 total
xz 12.88s user 0.14s system 98% cpu 13.239 total 1.9M
unxz 0.27s user 0.03s system 99% cpu 0.298 total
XZ (669413bb2db954bbfde3c4542fddbbab53891eb4) 1.8M
gzip 0.12s user 0.00s system 95% cpu 0.132 total 442K
gunzip 0.02s user 0.00s system 97% cpu 0.027 total
bzip2 1.28s user 0.01s system 99% cpu 1.298 total 363K
bunzip2 0.15s user 0.01s system 100% cpu 0.157 total
xz 1.62s user 0.03s system 99% cpu 1.652 total 347K
unxz 0.05s user 0.00s system 99% cpu 0.058 total
From a time and memory perspective, nothing compares to GZip, but if
given an average upload speed of 20KB/s, it would take ~400 seconds
longer to transfer the BZip2'd kernel snapshot than the XZ snapshot;
the transfer time difference is even greater between GZip and XZ. The
real time savings are relatively the same for all test cases, but less
dramatic for smaller repositories.
XZ decompresses ~1.8-2 times slower than GZip, and ~2.7-3.75 times
faster than BZip2; XZ gets relatively faster as snapshots get larger.
However, XZ takes relatively longer to compress as snapshots get larger.
The downside for XZ'd snapshots is the large CPU and memory load put on
the server to generate the compressed snapshot, though XZ will
eventually
have threading support, and the real clock time for making XZ'd
snapshots
would decrease if the server had a beefy multi-core CPU.
XZ compression is disabled by default to allow upgrades to take place
without any surprises, as the CPU and memory requirements will be an
issue for high load or lightweight servers. Also, the XZ format is still
new (format declared stable ~6 months ago), and there have been no
"stable" releases of the utils yet.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes instructions on how to disable a snapshot format and how
to add options to a snapshot format (e.g. setting the compression
level).
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow Gitweb administrators to set a 'disabled' key in the
%known_snapshot_formats hash to disable a specific snapshot format.
All formats are enabled by default to maintain backwards compatibility.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.. and simplify the ctx->size logic.
We now count the size in bytes, which means that 'lenW' was always just
the low 6 bits of the total size, so we don't carry it around separately
any more. And we do the 'size in bits' shift at the end.
Suggested by Nicolas Pitre and linux@horizon.com.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an equivalent expression, but the '+' gives us some freedom in
instruction selection (for example, we can use 'lea' rather than 'add'),
and associates with the other additions around it to give some minor
scheduling freedom.
Suggested-by: linux@horizon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid repeating the shared parts of the different rounds by adding a
macro layer or two. It was already more cpp than C.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mozilla-SHA1 code did this 80-word array for the 80 iterations. But
the SHA1 state is really just 512 bits, and you can actually keep it in
a kind of "circular queue" of just 16 words instead.
This requires us to do the xor updates as we go along (rather than as a
pre-phase), but that's really what we want to do anyway.
This gets me really close to the OpenSSL performance on my Nehalem.
Look ma, all C code (ok, there's the rol/ror hack, but that one doesn't
strictly even matter on my Nehalem, it's just a local optimization).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps a teeny bit. But what I -really- want to do is to avoid the
whole 80-array loop, and do the xor updates as I go along..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
