* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out pre context line handling into the new function
show_pre_context() and change the algorithm to rewind by looking for
newline characters and roll forward again, instead of maintaining an
array of line beginnings and ends.
This is slower for hits, but the cost for non-matching lines becomes
zero. Normally, there are far more non-matching lines, so the time
spent in total decreases.
Before this patch (current Linux kernel repo, best of five runs):
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.134s
user 0m1.932s
sys 0m0.196s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m12.059s
user 0m11.837s
sys 0m0.224s
The same with this patch:
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.117s
user 0m1.892s
sys 0m0.228s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m2.986s
user 0m2.696s
sys 0m0.288s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move last_shown into struct grep_opt, to make it available in
show_line(), and then make the function handle the printing of hunk
marks for context lines in a central place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff_set_find_func() is used to set user defined regular expressions
for finding function signatures. Add xdiff_clear_find_func(), which
frees the memory allocated by the former, making the API complete.
Also, use the new function in diff.c (the only call site of
xdiff_set_find_func()) to clean up after ourselves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier 476cc72 (request-pull: really disable pager, 2009-06-30)
tried to use the correct environment variable to disable paging
from multiple calls to "git log" and friends, but there was one
extra call to "git log" that was not covered by the trick.
Move the setting and exporting of GIT_PAGER much earlier in the
script to cover everybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comment mentions the case where use_terminator is set,
but this case is not handled at all by this chunk of code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
Free the memory allocated for struct strbuf pathbuf when we're done.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new argv array from a configured alias and the supplied
command line arguments, the new argv was allocated with one element too
many. Since the first element of the original argv array is skipped when
copying it to the new_argv, the number of elements that are allocated
should be reduced by one. 'count' is the number of elements that new_argv
contains, and *argcp is the number of elements in the original argv array.
So the total allocation (including the terminating NULL entry) for the
new_argv array should be:
count + (*argcp - 1) + 1
Also, the explicit assignment of the NULL terminating entry can be avoided
by just copying it over from the original argv array.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ff06c74 (Improve request-pull to handle non-rebased branches, 2007-05-01)
attempted to disable pager when running subcommands in this script, but
with a wrong variable. If GIT_PAGER is set, it takes precedence over
PAGER.
Noticed by Michal Marek.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following invocations did not work as expected on Windows:
git mv foo\bar dest
git mv foo\ dest
The first command was interpreted as
git mv foo/bar dest/foo/bar
because the Windows style directory separator was not obeyed when the
basename of 'foo\bar' was computed.
The second command failed because the Windows style directory separator was
not removed from the source directory, whereupon the lookup of the
directory in the index failed.
This fixes both issues by using is_dir_sep() and basename().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to include branch.*.rebase, remote.*.pushurl, and
add.ignore-errors
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some different but little cleanup changes to fix some missing
quotes, to fix what seemed to be an unended sentence, to reident a
little paragraph with too large a sentence and fix a branch name that
was referred to twice later by another name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The empty alt text optimizes screen estate in text-only browsers.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simple implementation of picon that only relies on the indiana.edu
database.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Views which contain many occurrences of the same email address (e.g.
shortlog view) benefit from not having to recalculate the MD5 of the
email address every time.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_tag must be adapted to use the hash keys expected by
git_print_authorship_rows. This is not a problem since git_tag is the
only user of this sub.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from 'log'-like layout
A U Thor <email@example.com> [date time]
to 'commit'-like layout
author A U Thor <email@example.com>
date time
committer C O Mitter <other.email@example.com>
committer date time
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect all author display code in appropriate functions, making it
easier to extend these functions on the CGI side.
We also move some of the presentation code from hard-coded HTML to CSS,
for easier customization.
A side effect of the refactoring is that now localtime is always
displayed with the 'at night' warning.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I do various statistics on git, and one of the things I look at is merges,
because they are often interesting events to count ("how many merges vs
how much 'real development'" kind of statistics). And you can do it with
some fairly straightforward scripting, ie
git rev-list --parents HEAD |
grep ' .* ' |
git diff-tree --always -s --pretty=oneline --stdin |
less -S
will do it.
But I finally got irritated with the fact that we can skip merges with
'--no-merges', but we can't do the trivial reverse operation.
So this just adds a '--merges' flag that _only_ shows merges. Now you can
do the above with just a
git log --merges --pretty=oneline
which is a lot simpler. It also means that we automatically get a lot of
statistics for free, eg
git shortlog -ns --merges
does exactly what you'd want it to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git svn: Doc update for multiple branch and tag paths
git svn: cleanup t9138-multiple-branches
git-svn: Canonicalize svn urls to prevent libsvn assertion
t9138: remove stray dot in test which broke bash
git-svn: convert globs to regexps for branch destinations
git svn: Support multiple branch and tag paths in the svn repository.
Add 'git svn reset' to unwind 'git svn fetch'
git-svn: speed up find_rev_before
Add 'git svn help [cmd]' which works outside a repo.
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
Using the "svn_cmd" wrapper instead of "svn" alone allows tests
to run consistently for users with customized
~/.subversion/configs. Additionally, using subshells via
"(cd ...)" allow cleaner and less error-prone tests to
be written.
[ew: expanded commit message]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[tr: handle border case where % is placed at end of buffer]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many calls to die() that do, or should, report
strerror(errno) to indicate how the syscall they guard failed.
Introduce a small helper function for this case.
Note:
- POSIX says vsnprintf can modify errno in some unlikely cases, so we
have to use errno early.
- We take some care to pass the original format to die_routine(), in
case someone wants to call die_errno() with custom format
characters.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning/initializing svn repositories with an uncanonicalize url
does not work as libsvn throws an assertion. This patch
canonicalize svn uris for the clone and init command from
git-svn.
[ew: fixed trailing whitespace]
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The stray dot broke bash and probably some other shells,
but worked fine with dash in my limited testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
For users pulling from machines with self compiled git installs,
in non-PATH locations, they can set the config option
remote.<name>.uploadpack to set the location of git-upload-pack.
When using 'git remote show <name>', the remote HEAD check
did not use the uploadpack configuration setting, and would
not use the configured program.
In builtin-remote.c, the config setting is already loaded
with the call to remote_get(), so this patch passes that remote
along to transport_get().
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marc Branchaud wrote:
> I'm fairly happy with this, except for the way the branch
> subcommand matches refspecs. The patch does a simple string
> comparison, but it'd be better to do an actual glob. I just
> couldn't track down the right function for that, so I left it as
> a strcmp and hope that a gitizen can tell me how to glob here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
