Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
The LOOKUP_REPLACE_OBJECT flag controls whether the
lookup_replace_object() function is invoked by
sha1_object_info_extended(), read_sha1_file_extended(), and
lookup_replace_object_extended(), but it is not immediately clear which
functions accept that flag.
Therefore restrict this flag to only sha1_object_info_extended(),
renaming it appropriately to OBJECT_INFO_LOOKUP_REPLACE and adding some
documentation. Update read_sha1_file_extended() to have a boolean
parameter instead, and delete lookup_replace_object_extended().
parse_sha1_header() also passes this flag to
parse_sha1_header_extended() since commit 46f0344 ("sha1_file: support
reading from a loose object of unknown type", 2015-05-03), but that has
had no effect since that commit. Therefore this patch also removes this
flag from that invocation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The LOOKUP_UNKNOWN_OBJECT flag was introduced in commit 46f0344
("sha1_file: support reading from a loose object of unknown type",
2015-05-03) in order to support a feature in cat-file subsequently
introduced in commit 39e4ae3 ("cat-file: teach cat-file a
'--allow-unknown-type' option", 2015-05-03). Despite its name and
location in cache.h, this flag is used neither in
read_sha1_file_extended() nor in any of the lookup functions, but used
only in sha1_object_info_extended().
Therefore rename this flag to OBJECT_INFO_ALLOW_UNKNOWN_TYPE, taking the
name of the cat-file flag that invokes this feature, and move it closer
to the declaration of sha1_object_info_extended(). Also add
documentation for this flag.
OBJECT_INFO_ALLOW_UNKNOWN_TYPE is defined to 2, not 1, to avoid
conflicting with LOOKUP_REPLACE_OBJECT. Avoidance of this conflict is
necessary because sha1_object_info_extended() supports both flags.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal logic used in "git blame" has been libified to make it
easier to use by cgit.
* js/blame-lib: (29 commits)
blame: move entry prepend to libgit
blame: move scoreboard setup to libgit
blame: move scoreboard-related methods to libgit
blame: move fake-commit-related methods to libgit
blame: move origin-related methods to libgit
blame: move core structures to header
blame: create entry prepend function
blame: create scoreboard setup function
blame: create scoreboard init function
blame: rework methods that determine 'final' commit
blame: wrap blame_sort and compare_blame_final
blame: move progress updates to a scoreboard callback
blame: make sanity_check use a callback in scoreboard
blame: move no_whole_file_rename flag to scoreboard
blame: move xdl_opts flags to scoreboard
blame: move show_root flag to scoreboard
blame: move reverse flag to scoreboard
blame: move contents_from to scoreboard
blame: move copy/move thresholds to scoreboard
blame: move stat counters to scoreboard
...
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
textconv_object is used in places other than blame.c and should be moved
to a more appropriate location. Other textconv related functions are
located in diff.c so that seems as good a place as any.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a sha1 lookup returns the tree path via "struct
object_context", it just copies it into a fixed-size buffer.
This means the result can be truncated, and it means our
"struct object_context" consumes a lot of stack space.
Instead, let's allocate a string on the heap. Because most
callers don't care about this information, we'll avoid doing
it by default (so they don't all have to start calling
free() on the result). There are basically two options for
the caller to signal to us that it's interested:
1. By setting a pointer to storage in the object_context.
2. By passing a flag in another parameter.
Doing (1) would match the way that sha1_object_info_extended()
works. But it would mean that every caller would have to
initialize the object_context, which they don't currently
have to do.
This patch does (2), and adds a new bit to the function's
flags field. All of the callers that look at the "path"
field are updated to pass the new flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert each_loose_object_fn and each_packed_object_fn to take a pointer
to struct object_id. Update the various callbacks. Convert several
40-based constants to use GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
The callbacks for iterating a sha1_array must have a void
return. This is unlike our usual for_each semantics, where
a callback may interrupt iteration and have its value
propagated. Let's switch it to the usual form, which will
enable its use in more places (e.g., where we are replacing
an existing iteration with a different data structure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git hash-objects", which is a tool to take an
on-filesystem data stream and put it into the Git object store,
allowed to perform the "outside-world-to-Git" conversions (e.g.
end-of-line conversions and application of the clean-filter), and
it had the feature on by default from very early days, its reverse
operation "git cat-file", which takes an object from the Git object
store and externalize for the consumption by the outside world,
lacked an equivalent mechanism to run the "Git-to-outside-world"
conversion. The command learned the "--filters" option to do so.
* js/cat-file-filters:
cat-file: support --textconv/--filters in batch mode
cat-file --textconv/--filters: allow specifying the path separately
cat-file: introduce the --filters option
cat-file: fix a grammo in the man page
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
With this patch, --batch can be combined with --textconv or --filters.
For this to work, the input needs to have the form
<object name><single white space><path>
so that the filters can be chosen appropriately.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are circumstances when it is relatively easy to figure out the
object name for a given path, but not the name of the containing tree.
For example, when looking at a diff generated by Git, the object names
are recorded, but not the revision. As a matter of fact, the revisions
from which the diff was generated may not even exist locally.
In such a case, the user would have to generate a fake revision just to
be able to use --textconv or --filters.
Let's simplify this dramatically, because we do not really need that
revision at all: all we care about is that we know the path. In the
scenario described above, we do know the path, and we just want to
specify it separately from the object name.
Example usage:
git cat-file --textconv --path=main.c 0f1937fd
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --filters option applies the convert_to_working_tree() filter for
the path when showing the contents of a regular file blob object;
the contents are written out as-is for other types of objects.
This feature comes in handy when a 3rd-party tool wants to work with
the contents of files from past revisions as if they had been checked
out, but without detouring via temporary files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the style a little more consistent with other usage strings,
and will resolve a warning at
https://www.softcatala.org/recursos/quality/git.html
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, modify stream_blob_to_fd to
take a struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, make textconv_object take a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all of the static functions that are not callbacks to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib,
plus the actual change to the struct:
@@
struct expand_data E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct expand_data *E1;
@@
- E1->sha1
+ E1->oid.hash
@@
struct expand_data E1;
@@
- E1.delta_base_sha1
+ E1.delta_base_oid.hash
@@
struct expand_data *E1;
@@
- E1->delta_base_sha1
+ E1->delta_base_oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An all-zero initializer is fine for this struct, but because
the first element is a pointer, call sites need to know to
use "NULL" instead of "0". Otherwise some static checkers
like "sparse" will complain; see d099b71 (Fix some sparse
warnings, 2013-07-18) for example. So let's provide an
initializer to make this easier to get right.
But let's also comment that memset() to zero is explicitly
OK[1]. One of the callers embeds object_info in another
struct which is initialized via memset (expand_data in
builtin/cat-file.c). Since our subset of C doesn't allow
assignment from a compound literal, handling this in any
other way is awkward, so we'd like to keep the ability to
initialize by memset(). By documenting this property, it
should make anybody who wants to change the initializer
think twice before doing so.
There's one other caller of interest. In parse_sha1_header(),
we did not initialize the struct fully in the first place.
This turned out not to be a bug because the sub-function it
calls does not look at any other fields except the ones we
did initialize. But that assumption might not hold in the
future, so it's a dangerous construct. This patch switches
it to initializing the whole struct, which protects us
against unexpected reads of the other fields.
[1] Obviously using memset() to initialize a pointer
violates the C standard, but we long ago decided that it
was an acceptable tradeoff in the real world.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
This field, filled by sha1_object_info() contains the on-disk size of
an object, which could go over 4GB limit of unsigned long on 32-bit
systems. Use off_t for it instead and update all callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch-all" has been sped up, by taking advantage
of the fact that it does not have to read a list of objects, in two
ways.
* jk/cat-file-buffered-batch-all:
cat-file: default to --buffer when --batch-all-objects is used
cat-file: avoid noop calls to sha1_object_info_extended
Traditionally cat-file's batch-mode does not do any output
buffering. The reason is that a caller may have pipes
connected to its input and output, and would want to use
cat-file interactively, getting output immediately for each
input it sends.
This may involve a lot of small write() calls, which can be
slow. So we introduced --buffer to improve this, but we
can't turn it on by default, as it would break the
interactive case above.
However, when --batch-all-objects is used, we do not read
stdin at all. We generate the output ourselves as quickly as
possible, and then exit. In this case buffering is a strict
win, and it is simply a hassle for the user to have to
remember to specify --buffer.
This patch makes --buffer the default when --batch-all-objects
is used. Specifying "--buffer" manually is still OK, and you
can even override it with "--no-buffer" if you're a
masochist (or debugging).
For some real numbers, running:
git cat-file --batch-all-objects --batch-check='%(objectname)'
on torvalds/linux goes from:
real 0m1.464s
user 0m1.208s
sys 0m0.252s
to:
real 0m1.230s
user 0m1.172s
sys 0m0.056s
for a 16% speedup.
Suggested-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not unreasonable to ask cat-file for a batch-check
format of simply "%(objectname)". At first glance this seems
like a noop (you are generally already feeding the object
names on stdin!), but it has a few uses:
1. With --batch-all-objects, you can generate a listing of
the sha1s present in the repository, without any input.
2. You do not have to feed sha1s; you can feed arbitrary
sha1 expressions and have git resolve them en masse.
3. You can even feed a raw sha1, with the result that git
will tell you whether we actually have the object or
not.
In case 3, the call to sha1_object_info is useful; it tells
us whether the object exists or not (technically we could
swap this out for has_sha1_file, but the cost is roughly the
same).
In case 2, the existence check is of debatable value. A
mass-resolution might prefer performance to safety (against
outputting a value for a corrupted ref, for example).
However, the object lookup cost is likely not as noticeable
compared to the resolution cost. And since we have provided
that safety in the past, the conservative choice is to keep
it.
In case 1, though, the object lookup is a definite noop; we
know about the object because we found it in the object
database. There is no new information gained by making the
call.
This patch detects that case and optimizes out the call.
Here are best-of-five timings for linux.git:
[before]
$ time git cat-file --buffer \
--batch-all-objects \
--batch-check='%(objectname)'
real 0m2.117s
user 0m2.044s
sys 0m0.072s
[after]
$ time git cat-file --buffer \
--batch-all-objects \
--batch-check='%(objectname)'
real 0m1.230s
user 0m1.176s
sys 0m0.052s
There are two implementation details to note here.
One is that we detect the noop case by seeing that "struct
object_info" does not request any information. But besides
object existence, there is one other piece of information
which sha1_object_info may fill in: whether the object is
cached, loose, or packed. We don't currently provide that
information in the output, but if we were to do so later,
we'd need to take note and disable the optimization in that
case.
And that leads to the second note. If we were to output
that information, a better implementation would be to
remember where we saw the object in --batch-all-objects in
the first place, and avoid looking it up again by sha1.
In fact, we could probably squeeze out some extra
performance for less-trivial cases, too, by remembering the
pack location where we saw the object, and going directly
there to find its information (like type, size, etc). That
would in theory make this optimization unnecessary.
I didn't pursue that path here for two reasons:
1. It's non-trivial to implement, and has memory
implications. Because we sort and de-dup the list of
output sha1s, we'd have to record the pack information
for each object, too.
2. It doesn't save as much as you might hope. It saves the
find_pack_entry() call, but getting the size and type
for deltified objects requires walking down the delta
chain (for the real type) or reading the delta data
header (for the size). These costs tend to dominate the
non-trivial cases.
By contrast, this optimization is easy and self-contained,
and speeds up a real-world case I've used.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to prepare a text file with a DOS editor and feed it
as a batch command stream to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsys text and the usage string of subcommands that read list
of things from the standard input are often shown like this:
git gostak [--distim] < <list-of-doshes>
This is problematic in a number of ways:
* The way to use these commands is more often to feed them the
output from another command, not feed them from a file.
* Manual pages outside Git, commands that operate on the data read
from the standard input, e.g "sort", "grep", "sed", etc., are not
described with such a "< redirection-from-file" in their synopsys
text. Our doing so introduces inconsistency.
* We do not insist on where the output should go, by saying
git gostak [--distim] < <list-of-doshes> > <output>
* As it is our convention to enclose placeholders inside <braket>,
the redirection operator followed by a placeholder filename
becomes very hard to read, both in the documentation and in the
help text.
Let's clean them all up, after making sure that the documentation
clearly describes the modes that take information from the standard
input and what kind of things are expected on the input.
[jc: stole example for fmt-merge-msg from Jonathan]
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sorting we could probably live without, but printing
duplicates is just a hassle for the user, who must then
de-dup themselves (or risk a wrong answer if they are doing
something like counting objects with a particular property).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to examine all objects in the
repository. Normally this is done with "git rev-list --all
--objects", but:
1. That shows only reachable objects. You may want to look
at all available objects.
2. It's slow. We actually open each object to walk the
graph. If your operation is OK with seeing unreachable
objects, it's an order of magnitude faster to just
enumerate the loose directories and pack indices.
You can do this yourself using "ls" and "git show-index",
but it's non-obvious. This patch adds an option to
"cat-file --batch-check" to operate on all available
objects (rather than reading names from stdin).
This is based on a proposal by Charles Bailey to provide a
separate "git list-all-objects" command. That is more
orthogonal, as it splits enumerating the objects from
getting information about them. However, in practice you
will either:
a. Feed the list of objects directly into cat-file anyway,
so you can find out information about them. Keeping it
in a single process is more efficient.
b. Ask the listing process to start telling you more
information about the objects, in which case you will
reinvent cat-file's batch-check formatter.
Adding a cat-file option is simple and efficient. And if you
really do want just the object names, you can always do:
git cat-file --batch-check='%(objectname)' --batch-all-objects
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are really two things going on in this function:
1. We convert the name we got on stdin to a sha1.
2. We look up and print information on the sha1.
Let's split out the second half so that we can call it
separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If batch_one_object returns an error code, we stop reading
input. However, it will only do so if we feed it NULL,
which cannot happen; we give it the "buf" member of a
strbuf, which is always non-NULL.
We did originally stop on other errors (like a missing
object), but this was changed in 3c076db (cat-file --batch /
--batch-check: do not exit if hashes are missing,
2008-06-09). These days we keep going for any per-object
error (and print "missing" when necessary).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use a direct write() to output the results of --batch and
--batch-check. This is good for processes feeding the input
and reading the output interactively, but it introduces
measurable overhead if you do not want this feature. For
example, on linux.git:
$ git rev-list --objects --all | cut -d' ' -f1 >objects
$ time git cat-file --batch-check='%(objectsize)' \
<objects >/dev/null
real 0m5.440s
user 0m5.060s
sys 0m0.384s
This patch adds an option to use regular stdio buffering:
$ time git cat-file --batch-check='%(objectsize)' \
--buffer <objects >/dev/null
real 0m4.975s
user 0m4.888s
sys 0m0.092s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not put extra whitespace before the first macro
argument.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch(-check)" learned the "--follow-symlinks"
option that follows an in-tree symbolic link when asked about an
object via extended SHA-1 syntax, e.g. HEAD:RelNotes that points at
Documentation/RelNotes/2.5.0.txt. With the new option, the command
behaves as if HEAD:Documentation/RelNotes/2.5.0.txt was given as
input instead.
* dt/cat-file-follow-symlinks:
cat-file: add --follow-symlinks to --batch
sha1_name: get_sha1_with_context learns to follow symlinks
tree-walk: learn get_tree_entry_follow_symlinks
This wires the in-repo-symlink following code through to the cat-file
builtin. In the event of an out-of-repo link, cat-file will print
the link in a new format.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git cat-file' throws an error while trying to print the type or
size of a broken/corrupt object. This is because these objects are
usually of unknown types.
Teach git cat-file a '--allow-unknown-type' option where it prints
the type or size of a broken/corrupt object without throwing
an error.
Modify '-t' and '-s' options to call sha1_object_info_extended()
directly to support the '--allow-unknown-type' option.
Add documentation for 'cat-file --allow-unknown-type'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
cat-file: add documentation for '--allow-unknown-type' option.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only parse the options if 2 or 3 arguments are specified.
Update 'struct option options[]' to use OPT_CMDMODE rather than
OPT_SET_INT to allow only one mutually exclusive option and avoid the
need for checking number of arguments. This was written by Junio C Hamano,
tested by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cat_one_file(), "type" and "size" variables are defined in the
function scope, and then two variables of the same name are defined
in a block in one of the if/else statement, hiding the definitions
in the outer scope.
Because the values of the outer variables before the control enters
this scope, however, do not have to be preserved, we can remove
useless definitions of variables from the inner scope safely without
breaking anything.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
