Add tests where one file is renamed to two different paths in different
sides of history, and where each of the new files matches the name of a
directory from the opposite side of history. Include tests for both the
case where the merge results in those directories not being cleanly
removed, and where those directories are cleanly removed during the merge.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interesting testcase is having two files each in their own subdirectory
getting renamed to the toplevel at the directory pathname of the other.
Questions arise as to whether the order of operations matters and whether
the directories can correctly get out of the way and make room for the
new files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having the source of a rename be involved in a directory/file conflict does
not currently pose any difficulties to the current merge-recursive
algorithm (in contrast to destinations of renames and D/F conflicts).
However, combining the two seemed like good testcases to include for
completeness.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging two branches with some path involved in a D/F conflict, the
choice of which branch to merge into the other matters for (at least) two
reasons: (1) whether the working copy has a directory full of files that
is in the way of a file, or a file exists that is in the way of a
directory of files, (2) when the directory full of files does not disappear
due to the merge, what files at the same paths should be renamed to
(e.g. filename~HEAD vs. filename~otherbranch).
Add some tests that reverse the merge order of two other tests, and which
verify the contents are as expected (namely, that the results are identical
other than modified-for-uniqueness filenames involving branch names).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testing of the various ways that a renamed file to a path involved in
a directory/file conflict may be involved in. This includes whether or not
there are conflicts of the contents of the renamed file (if the file was
modified on both sides of history), and whether the directory from the
other side of the merge will disappear as a result of the merge or not.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous D/F fixes I submitted (5a2580d and ae74548) had caused merge to
become excessively spammy, which was fixed in 96ecac6 (merge-recursive:
Avoid excessive output for and reprocessing of renames 2010-08-20). Add a
new test to avoid repeating that mistake with my several upcoming changes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d5af510 (RE: [PATCH] Avoid rename/add conflict when contents are identical
2010-09-01) avoided erroring out in a rename/add conflict when the contents
were identical. A simpler fix could have handled that particular testcase,
but it would not correctly handle the case where a symlink is involved.
Add another testcase using symlinks, to avoid breaking that case.
Signed-off-by: Ken Schalk <ken.schalk@intel.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame --textconv is wrongly calling the textconv filter on
symlinks: symlinks are stored as blobs whose content is the target of
the link, and blame calls the textconv filter on a temporary file
filled-in with the content of this blob.
For example:
$ git blame -C -C regular-file.pdf
Error: May not be a PDF file (continuing anyway)
Error: PDF file is damaged - attempting to reconstruct xref table...
Error: Couldn't find trailer dictionary
Error: Couldn't read xref table
Warning: program returned non-zero exit code #1
fatal: unable to read files to diff
That errors come from pdftotext run on symlink.pdf being extracted to
/tmp/ with one-line plain-text content pointing to link destination.
So several failures are demonstrated here:
- git cat-file --textconv :symlink.bin # also HEAD:symlink.bin
- git blame --textconv symlink.bin
- git blame -C -C --textconv regular-file # but also looks on symlink.bin
At present they all fail with something like.
E: /tmp/j3ELEs_symlink.bin is not "binary" file
NOTE: git diff doesn't try to textconv the pathnames, it runs the
textual diff without textconv, which is the expected behavior.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The textconv filter is sometimes incorrectly ran on a temporary file
whose content is the target of a symbolic link, instead of actual file
content. Prepare to test this by marking the content of the file to
convert with "bin:", and let the helper die if "bin:" is not found in
the file content.
NOTE: I've changed $@ to $1 in helper becase textconv program "should
take a single argument" (see Documentation/gitattributes.txt), so
making this more explicit makes sense and also helps to avoid
problems with feeding arguments to echo.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/grep-header-all-match-fix:
log --author: take union of multiple "author" requests
grep: move logic to compile header pattern into a separate helper
* jc/pickaxe-grep:
diff/log -G<pattern>: tests
git log/diff: add -G<regexp> that greps in the patch text
diff: pass the entire diff-options to diffcore_pickaxe()
gitdiffcore doc: update pickaxe description
* rr/fmt-merge-msg:
t6200-fmt-merge-msg: Exercise '--log' to configure shortlog length
t6200-fmt-merge-msg: Exercise 'merge.log' to configure shortlog length
merge: Make 'merge.log' an integer or boolean option
merge: Make '--log' an integer option for number of shortlog entries
fmt_merge_msg: Change fmt_merge_msg API to accept shortlog_len
Conflicts:
builtin/merge.c
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash branch <branch> <stash>" started discarding the stash
when the branch creation fails. It should have kept the stash
intact when aborting.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This bug was disovered by someone on IRC when he tried to
$ git stash branch <branch> <stash>
while <branch> already existed. In that case the stash is dropped even
though it isn't applied on any branch, so the stash is effectively lost.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to use a command line --to-cmd=cmd
to create the list of "To:" addresses.
Used a shared routine for --cc-cmd and --to-cmd.
Did not use IPC::Open2, leaving that for Ævar if
ever he decides to fix the other bugs he might find.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test was missing some "&&" at the end of some lines and it
was wrong because, as the replacement refs were not fetched,
the commits from the parallel branch should not show up. This
was found by Elijah Newren.
This is fixed by checking that after the branch from HASH6 is
fetched, the commits from the parallel branch don't show up,
and then by fetching the replacement refs and checking that
they do show up afterwards.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a long time (29508e1 "Isolate shared HTTP request functionality", Fri
Nov 18 11:02:58 2005), we've followed HTTP redirects with
CURLOPT_FOLLOWLOCATION.
However, when the remote HTTP server returns a redirect the default
libcurl action is to change a POST request into a GET request while
following the redirect, but the remote http backend does not expect
that.
Fix this by telling libcurl to always keep the request as type POST with
CURLOPT_POSTREDIR.
For users of libcurl older than 7.19.1, use CURLOPT_POST301 instead,
which only follows 301s instead of both 301s and 302s.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems which have dash as /bin/sh, such as Ubuntu, the final
test (master@{n} for various n) fails with a syntax error while
processing an arithmetic expansion. The syntax error is caused by
using a bare name ('N') as a variable reference in the expression.
In order to avoid the syntax error, we spell the variable reference
as '$N' rather than simply 'N'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick will segfault when transplanting a root commit if the --ff
option is used. This happens because the "parent" pointer is set to NULL
when the commit being cherry-picked has no parents. Later, when "parent"
is dereferenced, the cherry-pick segfaults.
Fix this by checking whether "parent" is NULL before dereferencing it and
add a test for this case of cherry-picking a root commit with --ff.
Reported-by: Zbyszek Szmek <zbyszek@in.waw.pl>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-base between @$parents and $merge_tip may have been reached
through a merge commit. This means that some commits that are ancestors
of @$parents will not be ancestors of $merge_base. The mergeinfo
property will not list commits that are ancestors of @$parents, so we
need to explicitly exclude them.
[ew: squashed and cleaned up test case from Steven]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When we're diffing symlinks, we consider the contents to be
the pathname that the symlink points to. When a user sets up
a userdiff driver like "*.pdf diff=pdf", their "diff.pdf.*"
config generally tells us what to do with the content of
pdf files.
With the current code, we will actually process a symlink
like "link.pdf" using a configured pdf driver, meaning we
are using contents which consist of a pathname with
configuration that is expecting contents that consist of an
actual pdf file.
The most noticeable example of this would have been
textconv; however, it was already protected in its own
textconv-specific code path. We can still see the breakage
with something like "diff.*.binary", though. You could
also see it with diff.*.funcname, though it is a bit harder
to trigger accidentally there.
This patch adds a check for S_ISREG lower in the callstack
than the textconv-specific check, which should block use of
any userdiff config for non-regular files. We can drop the
check in the textconv code, which is now redundant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
t7003-filter-branch.sh had a make_commit() function that was identical
to test_commit() in test-lib.sh except that it used tr to create a
lowercase file name from the uppercase branch name instead of
appending ".t".
Not only is this unneeded code duplication, it also was something
simply waiting to fail on case-insensitive file systems. So replace
all uses of make_commit with test_commit.
While we're editing the setup, chain it together with && so that
failures early in the sequence don't get lost and add a commit graph.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the olden days,
log --author=me --committer=him --grep=this --grep=that
used to be turned into:
(OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(PATTERN this)
(PATTERN that))
showing my patches that do not have any "this" nor "that", which was
totally useless.
80235ba ("log --author=me --grep=it" should find intersection, not union,
2010-01-17) improved it greatly to turn the same into:
(ALL-MATCH
(HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR (PATTERN this) (PATTERN that)))
That is, "show only patches by me and committed by him, that have either
this or that", which is a lot more natural thing to ask.
We however need to be a bit more clever when the user asks more than one
"author" (or "committer"); because a commit has only one author (and one
committer), they ought to be interpreted as asking for union to be useful.
The current implementation simply added another author/committer pattern
at the same top-level for ALL-MATCH to insist on matching all, finding
nothing.
Turn
log --author=me --author=her \
--committer=him --committer=you \
--grep=this --grep=that
into
(ALL-MATCH
(OR (HEADER-AUTHOR me) (HEADER-AUTHOR her))
(OR (HEADER-COMMITTER him) (HEADER-COMMITTER you))
(OR (PATTERN this) (PATTERN that)))
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY/.." (both defined in
t/test-lib.sh) in t/gitweb-lib.sh. It better describes the intent.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds fortran xfuncname and wordRegex patterns to the list of builtin
patterns. The intention is for the patterns to be appropriate for all
versions of fortran including 77, 90, 95. The patterns can be enabled by
adding the diff=fortran attribute to the .gitattributes file for the
desired file glob.
This also adds a new macro named IPATTERN which is just like the PATTERNS
macro except it sets the REG_ICASE flag so that case will be ignored.
The test code in t4018 and the docs were updated as appropriate.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously (e3bf5e43), a test was added to test whether the builtin
xfuncname regular expressions could be compiled without error by regcomp.
Let's do the same for the word_regex patterns. This should help catch any
cross-platform incompatibilities that exist between the pattern creator's
system and the various platforms that the test suite is commonly run on.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6106ce46 introduced a test to demonstrate fetch's failure to
retrieve any objects or update FETCH_HEAD when it was supplied a repository
URL and the current branch had a configured merge spec. This commit
expands the original test based on comments from Junio Hamano. In addition
to actually verifying that the fetch updates FETCH_HEAD correctly, and does
not update the current branch, two more tests are added to ensure that the
merge configuration is ignored even when the supplied URL matches the URL
of the remote configured for the branch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On IRIX 6.5, the printf utility in /usr/bin does not appear to handle the
\ddd notation according to POSIX. This printf appears to halt processing
of the string argument and ignore any additional characters in the string.
Work around this flaw by replacing the \000's with 'Q' and using the
q_to_nul helper function provided by test-lib.sh
This problem with printf is not apparent when using the Bash shell since
Bash implements a POSIX compatible printf function internally.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In merge-recursive.c, whenever there was a rename where a file name on one
side of the rename matches a directory name on the other side of the merge,
then the very first check that
string_list_has_string(&o->current_directory_set, ren1_dst)
would trigger forcing it into marking it as a rename/directory conflict.
However, if the path is only renamed on one side and a simple three-way
merge between the separate files resolves cleanly, then we don't need to
mark it as a rename/directory conflict. So, we can simply move the check
for rename/directory conflicts after we've verified that there isn't a
rename/rename conflict and that a threeway content merge doesn't work.
This changes the particular error message one gets in the case where the
directory name that a file on one side of the rename matches is not also
part of the rename pair. For example, with commits containing the files:
COMMON -> (HEAD, MERGE )
--------- --------------- -------
sub/file1 -> (sub/file1, newsub)
<NULL> -> (newsub/newfile, <NULL>)
then previously when one tried to merge MERGE into HEAD, one would get
CONFLICT (rename/directory): Rename sub/file1->newsub in HEAD directory newsub added in merge
Renaming sub/file1 to newsub~HEAD instead
Adding newsub/newfile
Automatic merge failed; fix conflicts and then commit the result.
After this patch, the error message will instead become:
Removing newsub
Adding newsub/newfile
CONFLICT (file/directory): There is a directory with name newsub in merge. Adding newsub as newsub~HEAD
Automatic merge failed; fix conflicts and then commit the result.
That makes more sense to me, because git can't know that there's a conflict
until after it's tried resolving paths involving newsub/newfile to see if
they are still in the way at the end (and if newsub/newfile is not in the
way at the end, there should be no conflict at all, which did not hold with
git previously).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side of a file rename matches a directory name on the other side,
the recursive merge strategy will fail. This is true even if the merge is
trivially resolvable.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To achieve that, all cd commands which weren't inside a subshell had to
be put into a new one.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the set_state command is not likely to fail, it is best to
stay in the habit of checking for failures.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is from 2007, which is late enough for the style to be
recognizably modern but still a while ago. Freshen it up to
follow new best practices:
- guard setup commands with test_expect_setup, so errors at
that stage can be caught;
- use <<\EOF in preference to <<EOF, to save reviewers the
trouble of looking for variable interpolations;
- use test_cmp instead of test "$foo" = "$bar", for better
output with -v on failure;
- indent commands in subshells and let them span multiple lines;
- combine the two "gitdir required mode" tests that do not make
as much sense alone.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure early failures are not masked by later successes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsck test is generally careful to remove the corrupt objects
it inserts, but dangling objects are left behind due to some typos
and omissions. It is better to clean up more completely, to
simplify the addition of later tests. So:
- guard setup and cleanup with test_expect_success to catch
typos and errors;
- check both stdout and stderr when checking for empty fsck
output;
- use test_cmp empty file in place of test $(wc -l <file) = 0,
for better debugging output when running tests with -v;
- add a remove_object () helper and use it to replace broken
object removal code that forgot about the fanout in
.git/objects;
- disable gc.auto, to avoid tripping up object removal if the
number of objects ever reaches that threshold.
- use test_when_finished to ensure cleanup tasks are run and
succeed when tests fail;
- add a new final test that no breakage or dangling objects
was left behind.
While at it, add a brief description to test_description of the
history that is expected to persist between tests.
Part of a campaign to clean up subshell usage in tests.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format the subshells introduced by the previous patch (Several tests:
cd inside subshell instead of around, 2010-09-06) like so:
(
cd subdir &&
...
) &&
This is generally easier to read and has the nice side-effect that
this patch will show what commands are used in the subshell, making
it easier to check for lost environment variables and similar
behavior changes.
Cc: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to exercise the '--log' command-line option of 'git
fmt-merge-msg'. It controls the number of shortlog entries to display
in merge commit messages.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to exercise the 'merge.log' configuration option of 'git
fmt-merge-msg'. It controls the number of shortlog entries to display
in merge commit messages.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/test-must-fail-missing:
tests: make test_might_fail fail on missing commands
tests: make test_might_fail more verbose
tests: make test_must_fail fail on missing commands
tests: make test_must_fail more verbose
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
Every so often, someone sends out an unedited cover-letter template.
Add a simple check to send-email that refuses to send if the subject
contains "*** SUBJECT HERE ***", with an option --force to override.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
* js/maint-reflog-beyond-horizon:
t1503: fix broken test_must_fail calls
rev-parse: tests git rev-parse --verify master@{n}, for various n
sha1_name.c: use warning in preference to fprintf(stderr
rev-parse: exit with non-zero status if ref@{n} is not valid.
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
Commit 0e87c36 (object: call "check_sha1_signature" with the
replacement sha1) changed the first argument passed to
parse_object_buffer() from "sha1" to "repl". With that change,
the returned obj pointer has the replacement SHA1 in obj->sha1,
not the original one.
But when using lookup_commit() and then parse_commit() on a
commit, we get an object pointer with the original sha1, but
the commit content comes from the replacement commit.
So the result we get from using parse_object() is different
from the we get from using lookup_commit() followed by
parse_commit().
It looks much simpler and safer to fix this inconsistency by
passing "sha1" to parse_object_bufer() instead of "repl".
The commit comment should be used to tell the the replacement
commit is replacing another commit and why. So it should be
easy to see that we have a replacement commit instead of an
original one.
And it is not a problem if the content of the commit is not
consistent with the sha1 as cat-file piped to hash-object can
be used to see the difference.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
>Due to this this (and maybe all the tests) need to depend on the
>SYMLINKS prereq.
Here's a third attempt with no use of symlinks in the test:
Skip the entire rename/add conflict case if the file added on the
other branch has the same contents as the file being renamed. This
avoids giving the user an extra copy of the same file and presenting a
conflict that is confusing and pointless.
A simple test of this case has been added in
t/t3030-merge-recursive.sh.
Signed-off-by: Ken Schalk <ken.schalk@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/compat-regex:
Fix compat/regex ANSIfication on MinGW
autoconf: regex library detection typofix
autoconf: don't use platform regex if it lacks REG_STARTEND
t/t7008-grep-binary.sh: un-TODO a test that needs REG_STARTEND
compat/regex: get rid of old-style definition
compat/regex: define out variables only used under RE_ENABLE_I18N
Change regerror() declaration from K&R style to ANSI C (C89)
compat/regex: get the gawk regex engine to compile within git
compat/regex: use the regex engine from gawk for compat
Conflicts:
compat/regex/regex.c
* jn/apply-filename-with-sp:
apply: handle traditional patches with space in filename
tests: exercise "git apply" with weird filenames
apply: split quoted filename handling into new function
* jn/merge-custom-no-trivial:
t7606: Avoid using head as a file name
merge: let custom strategies intervene in trivial merges
t7606 (merge-theirs): modernize style
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
Instead of using `cd dir && (...) && cd..` use `(cd dir && ...)`
This ensures that the test doesn't get caught in the subdirectory if there
is an error in the subshell.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow gitattributes to be set globally and system wide. This way, settings
for particular file types can be set in one place and apply for all user's
repositories.
The location of system-wide attributes file is $(prefix)/etc/gitattributes.
The location of the global file can be configured by setting
core.attributesfile.
Some parts of the code were copied from the implementation of the same
functionality in config.c.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
* en/d-f-conflict-fix:
merge-recursive: Avoid excessive output for and reprocessing of renames
merge-recursive: Fix multiple file rename across D/F conflict
t6031: Add a testcase covering multiple renames across a D/F conflict
merge-recursive: Fix typo
Mark tests that use symlinks as needing SYMLINKS prerequisite
t/t6035-merge-dir-to-symlink.sh: Remove TODO on passing test
fast-import: Improve robustness when D->F changes provided in wrong order
fast-export: Fix output order of D/F changes
merge_recursive: Fix renames across paths below D/F conflicts
merge-recursive: Fix D/F conflicts
Add a rename + D/F conflict testcase
Add additional testcases for D/F conflicts
Conflicts:
merge-recursive.c
* jn/svn-fe:
t/t9010-svn-fe.sh: add an +x bit to this test
t9010 (svn-fe): avoid symlinks in test
t9010 (svn-fe): use Unix-style path in URI
vcs-svn: Avoid %z in format string
vcs-svn: Rename dirent pool to build on Windows
compat: add strtok_r()
treap: style fix
vcs-svn: remove build artifacts on "make clean"
svn-fe manual: Clarify warning about deltas in dump files
Update svn-fe manual
SVN dump parser
Infrastructure to write revisions in fast-export format
Add stream helper library
Add string-specific memory pool
Add treap implementation
Add memory pool library
Introduce vcs-svn lib
* jn/paginate-fix:
t7006 (pager): add missing TTY prerequisites
merge-file: run setup_git_directory_gently() sooner
var: run setup_git_directory_gently() sooner
ls-remote: run setup_git_directory_gently() sooner
index-pack: run setup_git_directory_gently() sooner
config: run setup_git_directory_gently() sooner
bundle: run setup_git_directory_gently() sooner
apply: run setup_git_directory_gently() sooner
grep: run setup_git_directory_gently() sooner
shortlog: run setup_git_directory_gently() sooner
git wrapper: allow setup_git_directory_gently() be called earlier
setup: remember whether repository was found
git wrapper: introduce startup_info struct
Conflicts:
builtin/index-pack.c
* jn/maint-setup-fix:
setup: split off a function to handle ordinary .git directories
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
Conflicts:
builtin/index-pack.c
The same pattern is used in many tests, and makes it easy for new ones to
rely on $HOME being a trashable, clean, directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_create_repo code added in v1.2.2~6 to use a subshell
instead of keeping track of the old working directory and cd-ing back
when it's done.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test has no prerequisites satisfied (the usual case), instead
of "missing THING of THING", just say "missing THING". This does not
affect the output when a test is skipped due to a missing
prerequisites if another prerequisite is satisfied.
For example: instead of
ok 8 # skip notes work (missing EXPENSIVE of EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
write
ok 8 # skip notes work (missing EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the passing TODO test in t0000-basic.sh to run inside its own
test-lib.sh. The motivation is to have nothing out of the ordinary on
a normal test run for test smoking purposes.
If every normal test run has a passing TODO you're more likely to turn
a blind eye to it and not to investigate cases where things really are
passing unexpectedly.
It also makes the prove(1) output less noisy. Before:
All tests successful.
Test Summary Report
-------------------
./t0000-basic.sh (Wstat: 0 Tests: 46 Failed: 0)
TODO passed: 5
Files=484, Tests=6229, 143 wallclock secs ( 4.00 usr 4.15 sys + 104.77 cusr 351.57 csys = 464.49 CPU)
Result: PASS
And after:
All tests successful.
Files=484, Tests=6228, 139 wallclock secs ( 4.07 usr 4.25 sys + 104.54 cusr 350.85 csys = 463.71 CPU)
Result: PASS
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that test the test-lib.sh itself need to be executed in the
dynamically created trash directory, so we can't assume
$TEST_DIRECTORY is ../ for those.
As a side benefit this change also makes it easy for us to move the
t/*.sh tests into subdirectories if we ever want to do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code that used $TEST_DIRECTORY/.. to use $GIT_BUILD_DIR
instead, the two are equivalent, but the latter is easier to read.
This required moving the assignment od GIT_BUILD_DIR to earlier in the
test-lib.sh file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the redundant calls to $(pwd) to use $TEST_DIRECTORY
instead. None of these were being executed after we cd'd somewhere
else so they weren't actually needed.
This also makes it easier to add support for overriding the test
library location and run tests in a different directory than t/.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new variable $GIT_BUILD_DIR which can be used to locate
data that resides under the build directory, and use that instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect and report hard-to-notice spelling mistakes like
test_might_fail "git config --unset whatever"
(the extra quotes prevent the shell from running git as intended;
instead, the shell looks for a "git config --unset whatever" file).
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let test_might_fail say something about its failures for consistency
with test_must_fail.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend remove_note() in the notes API to return whether or not a note was
actually removed. Use this in 'git notes remove' to skip the creation of
a notes commit when no notes were actually removed.
Also add a test illustrating the change in behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of it is to run a command that produces failure. A
missing command is more likely an error in the test script
(e.g., using 'test_must_fail "command with arguments"', or
relying on a missing command).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because test_must_fail fails when a command succeeds, the
command frequently does not produce any output (since, after
all, it thought it was succeeding). So let's have
test_must_fail itself report that a problem occurred.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in detached-stash are calling test_must_fail
in such a way that the arguments to test_must_fail do, indeed, fail
but not in the manner expected by the test.
This patch removes the unnecessary and unhelpful double quotes.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in maint-reflog-beyond-horizon are calling test_must_fail
in such a way that the arguments to test_must_fail do, indeed, fail
but not in the manner expected by the test.
This patch removes the unnecessary and unhelpful double quotes.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git status" and the diff family the submodule.*.ignore settings from
.git/config and .gitmodules can be used to override the default set via
diff.ignoreSubmodules on a per-submodule basis. Let's do this consistently
and teach checkout to use these settings too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, document that checkout uses this flag too in the Documentation.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the topmost three commits in a branch were merge commits, 'git
format-patch -3' used to output nothing. Since Git can't prepare
patches out of merge commits anyway, don't go over them in the first
place. 'git format-patch -3' now prepares three patches from the
topmost three commits without counting merge commits. Also add a
corresponding test in t4014-format-patch and update documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call test_tick before attempting to commit in the setup routine to
preserve the order of the commits.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can be clever and know by ourselves when we need the behavior
implied by "--remap-to-ancestor". No need to encumber users by having
them exposed to it as a tunable. (Option kept for backward compatibility,
but it's now a no-op.)
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bundle command silently died with no sign of failure if it
could not create the bundle file. (Eg.: its path resovles to a directory,
or the parent dir is sticky while file already exists and is owned
by someone else.)
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for merging with ignoring line endings (specifically
--ignore-space-at-eol) when using recursive merging. This is
as a strategy-option, so that you can do:
git merge --strategy-option=ignore-space-at-eol <branch>
and
git rebase --strategy-option=ignore-space-at-eol <branch>
This can be useful for coping with line-ending damage (Xcode 3.1 has a
nasty habit of converting all CRLFs to LFs, and VC6 tends to just use
CRLFs for inserted lines).
The only option I need is ignore-space-at-eol, but while at it,
include the other xdiff whitespace options (ignore-space-change,
ignore-all-space), too.
[jn: with documentation]
Signed-off-by: Justin Frankel <justin@cockos.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git fetch' is supplied a single argument, it tries to match it
against a configured remote and then fetch the refs specified by the
named remote's fetchspec. Additionally, or alternatively, if the current
branch has a merge ref configured, and if the name of the remote supplied
to fetch matches the one in the branch's configuration, then git also adds
the merge ref to the list of refs to update.
If the argument to fetch does not specify a named remote, or if the name
supplied does not match the remote configured for the current branch, then
the current branch's merge configuration should not be considered.
git currently mishandles the case when the argument to fetch specifies a
GIT URL(i.e. not a named remote) and the current branch has a configured
merge ref. In this case, fetch should ignore the branch's merge ref and
attempt to fetch from the remote repository's HEAD branch. But, since
fetch only checks _whether_ the current branch has a merge ref configured,
and does _not_ check whether the branch's configured remote matches the
command line argument (until later), it will mistakenly enter the wrong
branch of an 'if' statement and will not fall back to fetch the HEAD branch.
The fetch ends up doing nothing and returns with a successful zero status.
Fix this by comparing the remote repository's name to the branch's remote
name, in addition to whether it has a configured merge ref, sooner, so that
fetch can correctly decide whether the branch's configuration is interesting
or not, and fall back to fetching from the remote's HEAD branch when
appropriate.
This fixes the test in t5510.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git fetch' is supplied just a repository URL (not a remote name),
and without a fetch refspec, it should fetch from the remote HEAD branch
and update FETCH_HEAD with the fetched ref. Currently, when 'git fetch'
is called like this, it fails to retrieve anything, and does not update
FETCH_HEAD, if the current checked-out branch has a configured merge ref.
i.e. this fetch fails to retrieve anything nor update FETCH_HEAD:
git checkout master
git config branch.master.merge refs/heads/master
git fetch git://git.kernel.org/pub/scm/git/git.git
but this one does:
git config --unset branch.master.merge
git fetch git://git.kernel.org/pub/scm/git/git.git
Add a test to demonstrate this flaw.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running git-merge on an unborn branch is supposed to do an index-level
merge with the other side, and then update the branch name there. In
the common case where the index was empty at the start, this makes
'git pull otherrepo branch' a convenient way to populate the history
after 'git init'.
However, if the index was *not* empty, git-merge silently discards
*both index and worktree* copies of all files that were tracked,
leading to data loss. Exhibit this bug.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces tests that verify that rev-parse
parses master@{n} correctly for various values of n less
than, equal to and greater than the number of revisions
in the reference log.
In particular, these tests check that rev-parse exits with a
non-zero status code and prints a message of the
following form to stderr.
fatal: Log for [^ ]* only has [0-9][0-9]* entries.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The time_notes script, which uses POSIX shell features, is
currently sometimes run with a non-POSIX /bin/sh.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A file named 'head' gets confused with the HEAD ref on
case-insensitive file systems. Replace '>head' with '>head.new' to
match the '>head.old' files they are compared to.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like $GIT_CONFIG, $GIT_CONFIG_PARAMETERS needs to be suppressed by
"git push" and its cousins when running local transport helpers to
imitate remote transport well.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using `cd dir && (...) && cd..` use `(cd dir && ...)`
This ensures that the test doesn't get caught in the subdirectory if
there is an error in the subshell.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds new tests which check that:
* git stash branch handles a stash-like argument when there is a stash stack
* git stash branch handles a stash-like argument when there is not a stash stack
* git stash show handles a stash-like argument when there is a stash stack
* git stash show handles a stash-like argument when there is not a stash stack
* git stash drop fails early if the specified argument is not a stash reference
* git stash pop fails early if the specified argument is not a stash reference
* git stash * fails early if the reference supplied is bogus
* git stash fails early with stash@{n} where n >= length of stash log
Helped-by: Johannes Sixt
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
* nd/fix-sparse-checkout:
unpack-trees: mark new entries skip-worktree appropriately
unpack-trees: do not check for conflict entries too early
unpack-trees: let read-tree -u remove index entries outside sparse area
unpack-trees: only clear CE_UPDATE|CE_REMOVE when skip-worktree is always set
t1011 (sparse checkout): style nitpicks
* hv/submodule-find-ff-merge:
Implement automatic fast-forward merge for submodules
setup_revisions(): Allow walking history in a submodule
Teach ref iteration module about submodules
Conflicts:
submodule.c
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
To discover filenames from the --- and +++ lines in a traditional
unified diff, currently "git apply" scans forward for a whitespace
character on each line and stops there. It can't use the whole line
because "diff -u" likes to include timestamps, like so:
--- foo 2000-07-12 16:56:50.020000414 -0500
+++ bar 2010-07-12 16:56:50.020000414 -0500
The whitespace-seeking heuristic works great, even when the tab
has been converted to spaces by some email + copy-and-paste
related corruption.
Except for one problem: if the filename itself contains whitespace,
the inferred filename will be too short.
When Giuseppe ran into this problem, it was for a file creation
patch (for debian/licenses/LICENSE.global BSD-style Chromium).
So one can't use the list of files present in the index to deduce an
appropriate filename (not to mention that way lies madness; see
v0.99~402, 2005-05-31).
Instead, look for a timestamp and use that if present to mark the end
of the filename. If no timestamp is present, the old heuristic is
used, with one exception: the space character \040 is not considered
terminating whitespace any more unless it is followed by a timestamp.
Reported-by: Giuseppe Iuculano <iuculano@debian.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that "git apply" can cope with strange filenames, particularly
filenames with spaces.
Not all platforms have a sane enough diff -u and expand to
reliably create the such patches and maybe future versions of GNU
diff will handle funny characters differently, so this uses
pre-generated patches. The script used to generate them is in
t/t4135/make-patches.
Filenames with tabs are not usable on NTFS; use something like the
FUNNYNAMES prerequisite from v1.3.0-rc1~67 (2006-03-03) to skip the
relevant tests when appropriate. The detection is not shared in
test-lib.sh to avoid wasting time while running other test scripts.
Backslash is the path separator on Windows, so do not used it in
file names there (v1.6.3-rc0~93^2~6, 2009-03-13).
Finally, filenames starting with a quotation mark do not behave well
in msys (see v1.7.0-rc0~94^2, t4030, t4031: work around bogus MSYS
bash path conversion, 2010-01-01), so skip those tests on Windows,
too.
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new find_name_gnu() function handles new-style '--- "a/foo"'
patch header lines, leaving find_name() itself a bit less
daunting.
Functional change: do not clobber the p-value when there are not
enough path components in a quoted file name to honor it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
Now that we have a regex engine that supports REG_STARTEND this test
should fail if "git grep" can't grep NULL characters.
Platforms that don't have a POSIX regex engine which supports
REG_STARTEND should always define NO_REGEX=YesPlease when compiling.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--parents" option did not appear until SVN 1.5.x
and is completely unnecessary in this case.
Reported-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since v1.7.1.1~23^2 (merge: --log appends shortlog to message if
specified, 2010-05-11), the fmt-merge-msg backend supports custom text
to override the merge title "Merge <foo> into <bar>".
Expose this functionality for scripted callers. Example:
git fmt-merge-msg --log -m \
"$(printf '%s\n' \
"Merge branch 'api-cleanup' into feature" \
'' \
'This is to use a few functions refactored for this purpose.'
)" <.git/FETCH_HEAD
Cc: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --independent does not support more than MAX_REVS
revs, git internally supports more with a different algorithm.
Expose that functionality as "git merge-base --independent".
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --merge-base does not support more than MAX_REVS
revs, git supports more with a different algorithm
(v1.6.0-rc0~51^2~13, Introduce get_octopus_merge_bases() in commit.c,
2008-06-27). Expose that functionality.
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup with test_expect_success. Use test_might_fail
instead of ignoring the exit code from git config --unset.
Point out setup commands that are shared by multiple tests,
to make it easy to write GIT_SKIP_TESTS specifications that
work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup with test_expect_success, put the opening quote
starting each test on the same line as the test_expect_* invocation,
and combine related actions into single tests.
While at it:
- use test_cmp instead of expr or test $foo = $bar, for more helpful
output with -v when tests fail;
- use test_commit for brevity.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people like to "git fetch origin && merge origin/master" from
the unborn branch provided when first initializing a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The details of the reflog message are not important, but
including something sane in the reflog is.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Probably as a development aid, this test script runs gitk --all
to allow the driver to inspect history between tests when run
with --debug. As a result, running all tests with --debug
requires closing a long series of gitk displays, one at a time.
Use git log --graph --oneline instead. This way, the history is
available for viewing with "git show" but the test script finishes
without interaction.
Longer term, it would be nice to have an option to run a
user-specified command between tests. This patch does not do
that.
Cc: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup commands with test_expect_success, so they are easier
to visually skip over and get to the good part. While at it:
- use "printf '%s\n' a b ..." instead of "cat <<EOF" for test
vectors with short lines;
- use test_cmp instead of test foo = bar where possible, for
better output with -v on failure;
- do not go to extraordinary lengths to print a relevant message
when test commands fail. There is a patch in flight that could be
used to restore the nice error messages in a cleaner way.
Cc: Lars Hjemli <hjemli@gmail.com>
Cc: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no branch 'foo' exists but a tag 'foo' does, then
git merge foo^ results in
Merge branch 'foo' (early part)
as a commit message, because the relevant code path checks that
refs/heads/foo is a valid refname for writing rather than for
reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule sync" synchronizes the repository URLs
it only updates submodules' .git/config. However, the old
URLs still exist in the super-project's .git/config.
Update the super-project's configuration so that commands
such as "git submodule update" use the URLs from .gitmodules.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test introduced in the "Use advise() for hints" patch by
Jonathan Nieder not to use '' for quotes inside '' delimited code. It
ended up introducing a file called <paths> to the main git repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
* cc/find-commit-subject:
blame: use find_commit_subject() instead of custom code
merge-recursive: use find_commit_subject() instead of custom code
bisect: use find_commit_subject() instead of custom code
revert: rename variables related to subject in get_message()
revert: refactor code to find commit subject in find_commit_subject()
revert: fix off by one read when searching the end of a commit subject
Some tests in t96xx series (cvsimport) want to write into the control area
(CVSROOT) of their test CVS repositories, but this does not work well when
the source area is made read-only (test trash directories are moved via
--root=else/where option).
Copy the supplied test CVS repository to a scratch place at the beginning
of these tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to declare a PERL prerequisite. These tests use the
-p switch, so they implicitly depend on Perl code, but nothing was
declaring this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to declare a PERL prerequisite. These tests use the
-p switch, so they implicitly depend on Perl code, but nothing was
declaring this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to declare a PERL prerequisite. These tests use the
-p switch, so they implicitly depend on Perl code, but nothing was
declaring this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the setup code in t/t9001-send-email.sh to use
test_expect_success. This way it isn't needlessly run in environments
where the test prerequisites aren't met.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the PROG=* assignment from t9001-send-email.sh. It's been there
since v1.4.0-rc1~30 when the test was originally added, but only tests
that source annotate-tests.sh need it, it was seemingly introduced to
this test via copy/paste coding.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the five tests that were all checking "git config --bool
core.filemode" to use a new FILEMODE prerequisite in
lib-prereq-FILEMODE.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the smoke target to create a test-results directory. This was
done implicitly by the test-lib before my "test-lib: Don't write
test-results when HARNESS_ACTIVE" patch, but after that smoking from
the pu branch hasn't worked.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-notes expensive timing test is only expensive because it
either did 10,100,1k and 10k iterations or nothing.
Change it to do 10 by default, with an option to run the expensive
version with the old GIT_NOTES_TIMING_TESTS=ZomgYesPlease variable.
Since nobody was ostensibly running this test under TAP the code had
bitrotted so that it emitted invalid TAP. This change fixes that.
The old version would also mysteriously fail on systems without
/usr/bin/time, there's now a check for that using the multiple test
prerequisite facility.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example I initially added to "Skipping tests" wasn't very
good. We'd rather skip tests using the three-arg prereq form to the
test_* functions, not bail out with a skip message.
Change the documentation to reflect that, but retain the bailout
example under a disclaimer which explains that it's probably not a
good idea to use it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change t/t7800-difftool.sh to to skip with the the three-arg prereq
form of test_expect_success instead of bailing out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the t/t5800-remote-helpers.sh test to skip with the the
three-arg prereq form of test_expect_success instead of bailing out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tests that skipped due to unavailable SYMLINKS support to
use the three-arg prereq form of test_expect_success.
This is like the "tests: implicitly skip SYMLINKS tests using
<prereq>" change, but I needed to create an additional test for some
setup code. It's in a separate change as suggested by Jonathan Nieder
for ease of reviewing.
Date: Tue, 27 Jul 2010 16:17:37 -0500
From: Jonathan Nieder <jrnieder@gmail.com>
Message-ID: <20100727211737.GA11768@burratino>
In-Reply-To: <1280265254-19642-2-git-send-email-avarab@gmail.com>
Subject: Re: [PATCH 1/4] tests: implicitly skip SYMLINKS tests using <prereq>
Ævar Arnfjörð Bjarmason wrote:
> +++ b/t/t4004-diff-rename-symlink.sh
> @@ -40,8 +34,9 @@ test_expect_success \
> # rezrov and nitfol are rename/copy of frotz and bozbar should be
> # a new creation.
>
> -GIT_DIFF_OPTS=--unified=0 git diff-index -M -p $tree >current
> -cat >expected <<\EOF
> +test_expect_success SYMLINKS 'setup diff output' "
> + GIT_DIFF_OPTS=--unified=0 git diff-index -M -p $tree >current
> + cat >expected <<\EOF
> diff --git a/bozbar b/bozbar
> new file mode 120000
> --- /dev/null
Probably belongs in a separate patch. More importantly, it is missing
&&-chaining (not a regression, but it is best to set a good example).
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tests that skipped due to unavailable SYMLINKS support to
use the three-arg prereq form of test_expect_success.
Now we get an indication of how many tests that need symlinks are
being skipped on platforms that don't support them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having no coverage at all is almost always a bad sign, but trying to
attain 100% coverage everywhere is usually a waste of time. Add a
paragraph to explain this to future test writers.
Inspired-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how test writers can generate coverage reports, to ensure
that their tests are really testing the code they think they're
testing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smoke server supports a free form text field with comments about a
report, and a comma delimited list of tags. Change the smoke_report
target to expose this functionality. Now smokers can send more data
that explains and categorizes the reports they're submitting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the smoke testing portion of t/Makefile not to include
GIT-BUILD-OPTIONS. It's a shellscript, not a Makefile snippet, so it
had the nasty side-effect of sneaking e.g. SHELL_PATH = '/bin/sh'
(with quotes) everywhere.
Just add our own PERL_PATH variable as a workaround. The t/Makefile
already has e.g. an equivalent SHELL_PATH and TAR option which
duplicate the definitions in GIT-BUILD-OPTIONS.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git now has a smoke testing service at http://smoke.git.nix.is that
anyone can send reports to. Change the t/README file to mention this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the capability to send smoke reports from the Git test suite.
Currently we only notice bugs in the test suite when it's run
manually. Bugs in Git that only occur on obscure platforms or setups
that the core developers aren't using can thus go unnoticed.
This series aims to change that. With it, anyone that's interested in
avoiding bitrot in Git can volunteer to run a smoke tester. A smoke
tester periodically compiles the latest version of Git, runs the test
suite, and submits a report to a central server indicating how the
test run went.
A smoke tester might run something like this in cron:
#!/bin/sh
cd ~/g/git
git fetch
for branch in maint master next pu; do
git checkout origin/$i &&
make clean all &&
cd t &&
make smoke_report
done
The smoker might want to compile git with non-default flags, include
bisecting functionality or run the tests under valgrind. Doing that is
outside the scope of this patch, this just adds a report submission
mechanism. But including a canonical smoke runner is something we'll
want to include eventually.
What this does now is add smoke and smoke_report targets to t/Makefile
(this example only uses a few tests for demonstration):
$ make clean smoke
rm -f -r 'trash directory'.* test-results
rm -f t????/cvsroot/CVSROOT/?*
rm -f -r valgrind/bin
rm -f .prove
perl ./harness --git-version="1.7.2.1.173.gc9b40" \
--no-verbose \
--archive="test-results/git-smoke.tar.gz" \
t0000-basic.sh t0001-init.sh t0002-gitfile.sh t0003-attributes.sh t0004-unwritable.sh t0005-signals.sh t0006-date.sh
t0000-basic.sh ....... ok
t0001-init.sh ........ ok
t0002-gitfile.sh ..... ok
t0003-attributes.sh .. ok
t0004-unwritable.sh .. ok
t0005-signals.sh ..... ok
t0006-date.sh ........ ok
All tests successful.
Test Summary Report
-------------------
t0000-basic.sh (Wstat: 0 Tests: 46 Failed: 0)
TODO passed: 5
Files=7, Tests=134, 3 wallclock secs ( 0.06 usr 0.05 sys + 0.23 cusr 1.33 csys = 1.67 CPU)
Result: PASS
TAP Archive created at /home/avar/g/git/t/test-results/git-smoke.tar.gz
The smoke target uses TAP::Harness::Archive to aggregate the test
results into a tarball. The tarball contains two things, the output of
every test file that was run, and a metadata file:
Tarball contents:
$ tar xzvf git-smoke.tar.gz
t0004-unwritable.sh
t0001-init.sh
t0002-gitfile.sh
t0005-signals.sh
t0000-basic.sh
t0003-attributes.sh
t0006-date.sh
meta.yml
A test report:
$ cat t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
A metadata file:
---
extra_properties:
file_attributes:
-
description: t0000-basic.sh
end_time: 1280437324.61398
start_time: 1280437324.22186
-
description: t0001-init.sh
end_time: 1280437325.12346
start_time: 1280437324.62393
-
description: t0002-gitfile.sh
end_time: 1280437325.29428
start_time: 1280437325.13646
-
description: t0003-attributes.sh
end_time: 1280437325.59678
start_time: 1280437325.30565
-
description: t0004-unwritable.sh
end_time: 1280437325.77376
start_time: 1280437325.61003
-
description: t0005-signals.sh
end_time: 1280437325.85426
start_time: 1280437325.78727
-
description: t0006-date.sh
end_time: 1280437326.2362
start_time: 1280437325.86768
file_order:
- t0000-basic.sh
- t0001-init.sh
- t0002-gitfile.sh
- t0003-attributes.sh
- t0004-unwritable.sh
- t0005-signals.sh
- t0006-date.sh
start_time: 1280437324
stop_time: 1280437326
The "extra_properties" hash is where we'll stick Git-specific info,
like whether Git was compiled with gettext or the fallback regex
engine, and what branch we're compiling. Currently no metadata like
this is included.
The entire tarball is then submitted to a central smokebox at
smoke.git.nix.is. This is done with curl(1) via the "smoke_report"
target:
$ make smoke_report
curl \
-H "Expect: " \
-F project=Git \
-F architecture=x86_64 \
-F platform=Linux \
-F revision="1.7.2.1.173.gc9b40" \
-F report_file=@test-results/git-smoke.tar.gz \
http://smoke.git.nix.is/app/projects/process_add_report/1 \
| grep -v ^Redirecting
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 117k 100 63 100 117k 3 6430 0:00:21 0:00:18 0:00:03 0
Reported #8 added.
Reports are then made available on the smokebox via a web interface:
http://smoke.git.nix.is/app/projects/smoke_reports/1
The smoke reports are also mirrored to a Git repository hosted on
GitHub:
http://github.com/gitsmoke/smoke-reports
The Smolder SQLite database that contains metadata about the reports
is also made available:
http://github.com/gitsmoke/smoke-database
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The support for multiple test prerequisites added by me in "test-lib:
Add support for multiple test prerequisites" was broken.
The for iterated over each prerequisite and returned true/false within
a case statement, but since it missed a return statement only the last
prerequisite in the list of prerequisites was ever considered, the
rest were ignored.
Fix that by changing the test_have_prereq code to something less
clever that keeps a count of the total prereqs and the ones we have
and compares the count at the end.
This comes with the added advantage that it's easy to list the missing
prerequisites in the test output, implement that while I'm at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The README for the test library suggested that you grep the
test-lib.sh for test_set_prereq to see what the preset prerequisites
were.
Remove that bit, and write a section explaining all the preset
prerequisites. Most of the text was lifted from from Junio C Hamano
and Johannes Sixt, See the "Tests in Cygwin" thread in May 2009 for
the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test output to print needed prerequisites as part of the
TAP. This makes it easy to see at a glance why a test was
skipped. Before:
ok 7 # skip <message>
ok 9 # skip <message>
After:
ok 7 # skip <message> (prereqs: DONTHAVEIT)
ok 9 # skip <message> (prereqs: HAVEIT,DONTHAVEIT)
This'll also be useful for smoke testing output, where the developer
reading the output may not be familiar with the system where tests are
being skipped.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_have_prereq function in test-lib.sh to support a
comma-separated list of prerequisites. This is useful for tests that
need e.g. both POSIXPERM and SANITY.
The implementation was stolen from Junio C Hamano and Johannes Sixt,
the tests and documentation were not. See the "Tests in Cygwin" thread
in May 2009 for the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP harnesses don't need to read test-results/*, since they keep track
of the number of passing/failing tests internally. Skip the generation
of these files when HARNESS_ACTIVE is set.
It's now possible to run the Git test suite without writing anything
to the t/ directory at all if you use a TAP harness and the --root
switch:
cd t
sudo mount -t tmpfs none /tmp/memory -o size=300m
prove -j9 ./t[0-9]*.sh :: --root=/tmp/memory
The I/O that the ~500 test-results/* files contributed was very
minimal, but I thought this was worth mentioning.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
In 5a2580d (merge_recursive: Fix renames across paths below D/F conflicts
2010-07-09), detection was added for renames across paths involved in a
directory<->file conflict. However, the change accidentally involved
reusing an outer loop index ('i') in an inner loop, changing its values
and causing a slightly different type of breakage for cases where there are
multiple renames across the D/F conflict. Fix by creating a new temporary
variable 'i'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/checkout-B:
builtin/checkout: handle -B from detached HEAD correctly
builtin/checkout: learn -B
builtin/checkout: reword hint for -b
add tests for checkout -b
When mergetool is run without path limiters it loops
over each entry in 'git ls-files -u'. This includes
autoresolved paths.
Teach mergetool to only merge files listed in 'rerere status'
when rerere is enabled.
There are some subtle but harmless changes in behavior.
We now call cd_to_toplevel when no paths are given.
We do this because 'rerere status' paths are always relative
to the root. This is beneficial for the non-rerere use as
well in that mergetool now runs against all unmerged files
regardless of the current directory.
This also slightly tweaks the output when run without paths
to be more readable.
The old output:
Merging the files: foo
bar
baz
The new output:
Merging:
foo
bar
baz
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add userdiff patterns for C#. This code is an improved version of
code by Adam Petaccia from 21 June 2009 mail to the list.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git bundle unbundle" and "git config" pagination tests are not
supposed to run when stdout is not a terminal and IO::Pty not available
to make one on the fly.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.6.1-rc1~294^2 (2008-08-23) explains, custom merge strategies
do not even kick in when the merge is truly trivial. But they
should, since otherwise a custom “--strategy=theirs” is not useful.
Perhaps custom strategies should not allow fast-forward either. This
patch does not make that change, since it is less important (because
it is always possible to explicitly use --no-ff).
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup commands with test_expect_success, so they are easier
to visually skip over and get to the good part. While at it:
- use test_commit for brevity and reproducible object names;
- use test_cmp instead of using the test builtin to compare the
result of command substitution, for better output with -v on
failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/maint-setup-fix' (early part):
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
For the pager choice (and the choice to paginate) to reflect the
current repository configuration, the repository needs to be
located first.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, “git -p bundle” does not always
respect the repository-local “[core] pager” setting.
It is hard to notice because subcommands other than
“git bundle unbundle” do not produce much output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.2~16^2 (2010-07-14) explains, without this change,
“git --paginate apply” can ignore the repository-local
“[core] pager” configuration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a regression test for the git log -M --follow $diff_option bug
introduced in v1.7.2-rc0~103^2~2, $diff_option being diff related
options like -p, --stat, --name-only etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Prefix the advice
with “hint: ” to help.
Before:
error: could not apply 7ab78c9... foo
After resolving the conflicts,
mark the corrected paths with 'git add <paths>' or 'git rm <paths>'
and commit the result with:
git commit -c 7ab78c9a7898b87127365478431289cb98f8d98f
After:
error: could not apply 7ab78c9... foo
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit -c 7ab78c9'
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick was written (v0.99.6~63, 2005-08-27), “git commit”
was quiet, and the output from cherry-pick provided useful information
about the progress of a rebase.
Now next to the output from “git commit”, the cherry-pick notification
is so much noise (except for the name of the picked commit).
$ git cherry-pick ..topic
Finished cherry-pick of 499088b.
[detached HEAD 17e1ff2] Move glob module to libdpkg
Author: Guillem Jover <guillem@debian.org>
8 files changed, 12 insertions(+), 9 deletions(-)
rename {src => lib/dpkg}/glob.c (98%)
rename {src => lib/dpkg}/glob.h (93%)
Finished cherry-pick of ae947e1.
[detached HEAD 058caa3] libdpkg: Add missing symbols to Versions script
Author: Guillem Jover <guillem@debian.org>
1 files changed, 2 insertions(+), 0 deletions(-)
$
The noise is especially troublesome when sifting through the output of
a rebase or multiple cherry-pick that eventually failed.
With the commit subject, it is already not hard to figure out where
the commit came from. So drop the “Finished” message.
Cc: Christian Couder <chriscool@tuxfamily.org>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-svn assumes that two tags created from the same
revision will have the same repo url, so it uses a ref to the
tag without checking that its url matches the current url.
This causes issues when fetching an svn repo where a tag was
created, deleted, and then recreated under the following
circumstances:
- Both tags were copied from the same revision.
- Both tags had the same name.
- Both tags had different repository paths.
- [Optional] Both tags have a file with the same name but
different content.
When all four conditions are met, a checksum mismatch error
occurs because the content of two files with the same path
differs (see t/t9155--git-svn-fetch-deleted-tag.sh):
Checksum mismatch: ChangeLog 065854....
expected: ce771b....
got: 9563fd....
When only the first three conditions are met, no error occurs
but the tag in git matches the first (deleted) tag instead of
the last (most recent) tag (see
t/t9156-git-svn-fetch-deleted-tag-2.sh).
The fix is to verify that the repo url for the ref matches the
current url. If the urls do not match, then a "tail" is grown
on the tag name by appending a dash and rechecking the new ref's
repo url until either a matching repo url is found or a new tag
is created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The svn-fe test fails on Windows in the “svn export” step because of
the lack of symlink support. With a less ambitious dump, it passes.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since v1.6.3-rc0~101^2~14 (Tests on Windows: $(pwd) must return
Windows-style paths, 2009-03-13), there is a subtle difference between
$(pwd) and $PWD in tests: the former returns Windows-style paths as
might be output by git and the latter Unix-style paths which msys
programs tend to prefer.
In file:// URIs, Unix-style paths are needed. Before: “svn export”
declares it cannot find
file://c:/apps/git/git/t/trash directory/simple-svco
After: “svn export” successfully finds
file:///c/apps/git/git/...
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
svndump parses data that is in SVN dumpfile format produced by
`svnadmin dump` with the help of line_buffer and uses repo_tree and
fast_export to emit a git fast-import stream.
Based roughly on com.hydrografix.svndump 0.92 from the SvnToCCase
project at <http://svn2cc.sarovar.org/>, by Stefan Hegny and
others.
[rr: allow input from files other than stdin]
[jn: with test, more error reporting]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This library provides thread-unsafe fgets()- and fread()-like
functions where the caller does not have to supply a buffer. It
maintains a couple of static buffers and provides an API to use
them.
[rr: allow input from files other than stdin]
[jn: with tests, documentation, and error handling improvements]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Intern strings so they can be compared by address and stored without
wasting space.
This library uses the macros in the obj_pool.h and trp.h to create a
memory pool for strings and expose an API for handling them.
[rr: added API docs]
[jn: with some API simplifications, new documentation and tests]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide macros to generate a type-specific treap implementation and
various functions to operate on it. It uses obj_pool.h to store memory
nodes in a treap. Previously committed nodes are never removed from
the pool; after any *_commit operation, it is assumed (correctly, in
the case of svn-fast-export) that someone else must care about them.
Treaps provide a memory-efficient binary search tree structure.
Insertion/deletion/search are about as about as fast in the average
case as red-black trees and the chances of worst-case behavior are
vanishingly small, thanks to (pseudo-)randomness. The bad worst-case
behavior is a small price to pay, given that treaps are much simpler
to implement.
>From http://www.canonware.com/download/trp/trp_hash/trp.h
[db: Altered to reference nodes by offset from a common base pointer]
[db: Bob Jenkins' hashing implementation dropped for Knuth's]
[db: Methods unnecessary for search and insert dropped]
[rr: Squelched compiler warnings]
[db: Added support for immutable treap nodes]
[jn: Reintroduced treap_nsearch(); with tests]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a memory pool library implemented using C macros. The
obj_pool_gen() macro creates a type-specific memory pool.
The memory pool library is distinguished from the existing specialized
allocators in alloc.c by using a contiguous block for all allocations.
This means that on one hand, long-lived pointers have to be written as
offsets, since the base address changes as the pool grows, but on the
other hand, the entire pool can be easily written to the file system.
This could allow the memory pool to persist between runs of an
application.
For the svn importer, such a facility is useful because each svn
revision can copy trees and files from any previous revision. The
relevant information for all revisions has to persist somehow to
support incremental runs.
[rr: minor cleanups]
[jn: added tests; removed file system backing for now]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, if remote.<name>.tagopt was set, the --tags and option would
have no effect when given to git fetch. So if
tagopt="--no-tags"
git fetch --tags
would not actually fetch tags.
This patch changes this behavior to only follow what is written in the
config if there is no option passed by the command line.
Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), pull --rebase would run
git rebase $merge_head
which resulted in a call to
git format-patch ... --ignore-if-in-upstream $merge_head..$cur_branch
This resulted in patches from $merge_head..$cur_branch being applied, as
long as they did not already exist in $cur_branch..$merge_head.
Unfortunately, when upstream is rebased, $merge_head..$cur_branch also
refers to "old" commits that have already been rebased upstream, meaning
that many patches that were already fixed upstream would be reapplied.
This could result in many spurious conflicts, as well as reintroduce
patches that were intentionally dropped upstream.
So the algorithm was changed in c85c792 (pull --rebase: be cleverer with
rebased upstream branches, 2008-01-26) and d44e712 (pull: support rebased
upstream + fetch + pull --rebase, 2009-07-19). Defining $old_remote_ref to
be the most recent entry in the reflog for @{upstream} that is an ancestor
of $cur_branch, pull --rebase was changed to run
git rebase --onto $merge_head $old_remote_ref
which results in a call to
git format-patch ... --ignore-if-in-upstream $old_remote_ref..$cur_branch
The whole point of this change was to reduce the number of commits being
reapplied, by avoiding commits that upstream already has or had.
In the rebased upstream case, this change achieved that purpose. It is
worth noting, though, that since $old_remote_ref is always an ancestor of
$cur_branch (by its definition), format-patch will not know what upstream
is and thus will not be able to determine if any patches are already
upstream; they will all be reapplied.
In the non-rebased upstream case, this new form is usually the same as the
original code but in some cases $old_remote_ref can be an ancestor of
$(git merge-base $merge_head $cur_branch)
meaning that instead of avoiding reapplying commits that upstream already
has, it actually includes more such commits. Combined with the fact that
format-patch can no longer detect commits that are already upstream (since
it is no longer told what upstream is), results in lots of confusion for
users (e.g. "git is giving me lots of conflicts in stuff I didn't even
change since my last push.")
Cases where additional commits could be reapplied include forking from a
commit other than the tracking branch, or amending/rebasing after pushing.
Cases where the inability to detect upstreamed commits cause problems
include independent discovery of a fix and having your patches get
upstreamed by some alternative route (e.g. pulling your changes to a third
machine, pushing from there, and then going back to your original machine
and trying to pull --rebase).
Fix the non-rebased upstream case by ignoring $old_remote_ref whenever it
is contained in $(git merge-base $merge_head $cur_branch). This should
have no affect on the rebased upstream case.
Acked-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
push: mention "git pull" in error message for non-fast forwards
Standardize do { ... } while (0) style
t/t7003: replace \t with literal tab in sed expression
index-pack: Don't follow replace refs.
The sed utilities on IRIX and Solaris do not interpret the sequence '\t'
to mean a tab character; they read a literal character 't'. So, use a
literal tab instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, attempting to index a pack containing objects that have been
replaced results in a fatal error that looks like:
fatal: SHA1 COLLISION FOUND WITH <replaced-object> !
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: remove spurious commas in email subject
fast-import: export correctly marks larger than 2^20-1
t/lib-git-svn.sh: use $PERL_PATH for perl, not perl from $PATH
diff: strip extra "/" when stripping prefix
dump_marks_helper() has a bug when dumping marks larger than 2^20-1,
i.e., when the sparse array has more than two levels. The bug was
that the 'base' counter was being shifted by 20 bits at level 3, and
then again by 10 bits at level 2, rather than a total shift of 20 bits
in this argument to the recursive call:
(base + k) << m->shift
There are two ways to fix this correctly, the elegant:
(base + k) << 10
and the one I chose due to edit distance:
base + (k << m->shift)
Signed-off-by: Raja R Harinath <harinath@hurrynot.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the git-svn tests to use $PERL_PATH, not the "perl" in $PATH.
Using perl in $PATH was added by Sam Vilain in v1.6.6-rc0~95^2~3,
Philippe Bruhat introduced $PERL_PATH to the test suite in
v1.6.6-rc0~9^2, but the lib-git-svn.sh tests weren't updated to use
the new convention.
This resulted in the git-svn tests always being skipped on my
system. My /usr/bin/perl has access to SVN::Core and SVN::Repos, but
the perl in my $PATH does not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test porcelain and plumbing error messages for different types of errors
of merge and checkout.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper functions are implemented, documented, and used in a few
places to validate them, but not everywhere to avoid useless code churn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The typical usage pattern would be to run a test (or simply a compilation
command) at given points in history.
The shell command is ran (from the worktree root), and the rebase is
stopped when the command fails, to give the user an opportunity to fix
the problem before continuing with "git rebase --continue".
This needs a little rework of skip_unnecessary_picks, which wasn't robust
enough to deal with lines like
exec >"file name with many spaces"
in the todolist. The new version extracts command, sha1 and rest from
each line, but outputs the line itself verbatim to avoid changing the
whitespace layout.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two ways a user might want to use "diff --relative":
1. For a file in a directory, like "subdir/file", the user
can use "--relative=subdir/" to strip the directory.
2. To strip part of a filename, like "foo-10", they can
use "--relative=foo-".
We currently handle both of those situations. However, if the user passes
"--relative=subdir" (without the trailing slash), we produce inconsistent
results. For the unified diff format, we collapse the double-slash of
"a//file" correctly into "a/file". But for other formats (raw, stat,
name-status), we end up with "/file".
We can do what the user means here and strip the extra "/" (and only a
slash). We are not hurting any existing users of (2) above with this
behavior change because the existing output for this case was nonsensical.
Patch by Jakub, tests and commit message by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git grep already runs a repository search unconditionally,
even when the --no-index option is supplied; running such a
search earlier is not very risky.
Just like with shortlog, without this change, the
“[pager] grep” configuration is not respected at all.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
shortlog already runs a repository search unconditionally;
running such a search earlier is not very risky.
Without this change, the “[pager] shortlog” configuration
is not respected at all: “git shortlog” unconditionally paginates.
The tests are a bit slow. Running the full battery like this
for all built-in commands would be counterproductive; the intent is
rather to test shortlog as a representative example command using
..._gently().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: clarify search results page when no matching commit found
Documentation: add a FILES section for show-ref
Makefile: add missing dependency on http.h
Makefile: add missing dependencies on url.h
Documentation/git-log: Clarify --full-diff
git-rebase: fix typo when parsing --force-rebase
imap-send: Fix sprintf usage
prune: allow --dry-run for -n and --verbose for -v
notes: allow --dry-run for -n and --verbose for -v
Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -C
Documentation: cite git-am from git-apply
t7003: fix subdirectory-filter test
Allow "check-ref-format --branch" from subdirectory
check-ref-format: handle subcommands in separate functions
pretty-options.txt: match --format's documentation with implementation.
Ensure that strcmp() isn't called when head is null.
Previously we were getting segfaults when checkout -B was done from a
detached HEAD.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse checkout narrows worktree down based on the skip-worktree bit
before and after $GIT_DIR/info/sparse-checkout application. If it does
not have that bit before but does after, a narrow is detected and the
file will be removed from worktree.
New files added by merge, however, does not have skip-worktree bit. If
those files appear to be outside checkout area, the same rule applies:
the file gets removed from worktree even though they don't exist in
worktree.
Just pretend they have skip-worktree before in that case, so the rule
is ignored.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid touching the worktree outside a sparse checkout,
when the update flag is enabled unpack_trees() clears the
CE_UPDATE and CE_REMOVE flags on entries that do not match the
sparse pattern before actually committing any updates to the
index file or worktree.
The effect on the index was unintentional; sparse checkout was
never meant to prevent index updates outside the area checked
out. And the result is very confusing: for example, after a
failed merge, currently "git reset --hard" does not reset the
state completely but an additional "git reset --mixed" will.
So stop clearing the CE_REMOVE flag. Instead, maintain a
CE_WT_REMOVE flag to separately track whether a particular
file removal should apply to the worktree in addition to the
index or not.
The CE_WT_REMOVE flag is used already to mark files that
should be removed because of a narrowing checkout area. That
usage will still apply; do not clear the CE_WT_REMOVE flag
in that case (detectable because the CE_REMOVE flag is not
set).
This bug masked some other bugs illustrated by the test
suite, which will be addressed by later patches.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Fixes: http://bugs.debian.org/583699
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of this clearing is, as explained in comment, because
verify_*() may set those bits before apply_sparse_checkout() is
called. By that time, it's not clear whether an entry will stay in
checkout area or out. After $GIT_DIR/info/sparse-checkout is applied,
we know what entries will be in finally. It's time to clean unwanted
bits.
That works perfectly when checkout area remains unchanged. When
checkout area changes, apply_sparse_checkout() may set CE_UPDATE
or CE_WT_REMOVE to widen/narrow checkout area. Doing the clearing
after apply_sparse_checkout() may clear those widening/narrowing
bits unexpectedly.
So, only do that on entries that are not affected by checkout area
changes (i.e. skip-worktree bit does not change after
apply_sparse_checkout).
This code does not actually fix anything though, just
future-proof. The removed code and the narrow/widen code inside
apply_sparse_checkout are currently independent (narrow code never
sets CE_REMOVE, widen code sets CE_UPDATE, but ce_skip_worktree()
would be false).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test would not fail if the filtering failed to do anything, since
in
test -z "$(git diff HEAD directorymoved:newsubdir)"'
'directorymoved:newsubdir' is not valid, so git-diff fails without
printing anything on stdout. But then the exit status of git-diff is
lost, whereas test -z "" succeeds.
Use 'git diff --exit-code' instead, which does the right thing and has
the added bonus of showing the differences if there are any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ref-format --branch requires access to the repository
to resolve refs like @{-1}.
Noticed by Nguyễn Thái Ngọc Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard all test code with test_expect_success to make the
script easier to follow. While at it, pick some other nits:
- use test_tick (more than we have to, to be realistic);
- 'single quotes' and \escaped HERE documents where possible
simplify review for escaping problems;
- omit whitespace after >redirection operators for
consistency with other tests;
- use "update-index --refresh" instead of testing that
"ls-files -u" output is empty, since the former produces
nicer output on failure;
- compare to expected nonempty "ls-files -u" output instead
of counting lines when it is expected to be nonempty.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An unusual sort of person (not me) may even enjoy the conflicts
from line-ending changes. But more importantly, it is useful to
document that behavior so we can more easily notice if it changes
in an uncontrolled way while no one is watching.
Cc: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout -m and cherry-pick have not been wired up to respect
merge.renormalize, but a naïve user would not know that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tweaks to simplify adding and running tests.
- Use test_tick for predictable, sort of realistic commit dates;
- Use test_cmp as "test_cmp expected actual" --- some crazy
content that was not expected should cause the test to fail;
- Remove and re-add all files at the start of each test so the
worktree is easier to think about;
- Avoid using cat where not necessary for clarity.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.6.1.3~4^2 (Fix gitdir detection when in subdir of gitdir,
2009-01-16) did not go far enough: when a git directory is
an ancestor of the original working directory, not only
should GIT_DIR be set to point to the .git directory, but
the original working directory should be restored before
carrying out the relevant command.
This way, the effect of running a git command from a subdir
of .git will be the same whether or not GIT_DIR is explicitly
set.
Noticed while investigating v1.6.0.3~1 (rehabilitate 'git
index-pack' inside the object store, 2008-10-20).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply", like most plumbing, does not automatically refresh the
index file even if it is only stat-dirty. So unless the two "cp"
commands in reset_preimage() for a given file happen to have the same
time stamp, there will be a spurious
error: sub/dir/file: does not match index
Refresh the index to eliminate this timing dependency. Noticed by
running the test with --valgrind (which slows things down a lot).
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase calls out to merge strategies, but did not support merge
strategy options so far. Add this, in the same style used in
git-merge.
Sadly we have to do the full quoting/eval dance here, since
merge-recursive supports the --subtree=<path> option which potentially
contains whitespace.
This patch does not cover git rebase -i, which does not call any merge
strategy directly except in --preserve-merges, and even then only for
merges.
[jc: with a trivial fix-up for 'expr']
Signed-off-by: Mike Lundy <mike@fluffypenguin.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When printing an error message saying a ref was requested that we do not
have, only print that ref, rather than the ref and everything sent to us
on the same packet line (e.g. protocol support specifications).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
test-lib: Remove 3 year old no-op --no-python option
test-lib: Ignore --quiet under a TAP harness
Documentation/rev-parse: quoting is required with --parseopt
Documentation: reporting bugs
Fix git rebase --continue to work with touched files
Document ls-files -t as semi-obsolete.
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the rest of the script to more closely follow the test
style guide. Guarding setup commands with test_expect_success
makes it easy to see the scope in which some particular data is
used; removal of whitespace after >redirection operators is just
for consistency.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a non-interactive rebase, sometimes
"git rebase --continue" will fail if an unmodified file is
touched in the working directory:
You must edit all merge conflicts and then
mark them as resolved using git add
This is caused by "git diff-files" reporting a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-files" as is done in git-rebase--interactive.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a file with:
(define archive-id "$Format:%ct|%h|a$")
and an export-subst attribute, the "%h" results in an full 40-digit
object name instead of the expected 7-digit one.
The export-subst feature requests unabbreviated object names because
that is the low-level default. The effect was not observable until
v1.7.1.1~17^2~3 (2010-05-03), which taught log --format=%h to respect
the --abbrev option.
Reported-by: Eli Barzilay <eli@barzilay.org>
Tested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various merge-recursive cases were fixed in "merge-recursive: Fix D/F
conflicts" by Elijah Newren. Some tests were changed from
test_expect_failure to test_expect_success, but one fell through the
cracks.
Change that test to use test_expect_success.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $HOME is unset (as in some automated build situations),
currently
git config --path path.home "~"
git config --path --get path.home
segfaults. Error out with
Failed to expand user dir in: '~/'
instead.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We document how to run prove with the --state option in t/README. This
produces a .prove YAML file in the current directory. Change the t/
gitignore to ignore it, and clean it up on `make clean'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test case checked the stdout and stderr of 'git add' by constructing a
single 'expect' file that contained both streams. But when the command
runs, the order of stdout and stderr output is unpredictable because it
depends on how the streams are buffered. At least on Windows, the buffering
is different from what the test case expected. Hence, check the two output
texts separately.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure git apply can apply patches with paths relative to the
toplevel of a work tree, a subdirectory, or within the repository
metadata directory.
Relative paths are broken for most commands when run from a
subdirectory of $GIT_DIR, "git apply" being no exception. The other
tests are meant to keep the demonstration of that company.
Based on a test by Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the style of these tests to make them easier to read.
- Replace test_rev_parse() which produced multiple mini-tests with a
simple function that can be used with the test body.
- Combine multiple mini-tests into larger chunks that are easier
to read.
- Do not hard-code object IDs. We may use a different hash some day.
- Use test_cmp in preference to the test builtin. The former
produces useful output when tests are run with the "-v" option.
- Guard all test code with test_expect_success. This makes it much
easier to visually scan through the test and find code of interest.
- Use subshells to make the current directory easier to track.
Outside of any subshell, the current directory is always
$TEST_DIRECTORY now.
Also add a new test demonstrating a possible bug noticed in the
process of cleaning up: “git rev-parse --show-prefix” leaves out
the trailing newline after an empty prefix when cwd is at the
toplevel of the work tree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9d2e942 (decode file:// and ssh:// URLs, 2010-05-23) the URL
logic unquotes escaped URLs. For the %2B type of escape, this is
conformant with RFC 2396. However, it also unquotes + into a space
character, which is only appropriate for the query strings in HTTP.
This notably broke fetching from the gtk+ repository.
We cannot just remove the corresponding code since the same
url_decode_internal() is also used by the HTTP backend to decode query
parameters. Introduce a new argument that controls whether the +
decoding happens, and use it only in the (client-side) url_decode().
Reported-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
* maint-1.6.5:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
A test case is added but the problem can only be seen when running
the test case with --valgrind.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a test like:
test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify fourth)"
the --verify does not accomplish much, since the exit status of
git rev-parse is not propagated to test. So it is more robust to
define and use the helper functions check_head_differs_from() and
check_head_equals() as done by this patch.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently do not disable diff.renames configuration while rebase
internally runs "format-patch" to feed "am -3".
The end user configuration for "diff" should not affect the result
produced by the higher level command that is related to "diff" only
because internally it is implemented in terms of it.
For that matter, I have a feeling that format-patch should not even look
at diff.renames, but we seem to have been doing this for a long time so
there is no easy way to fix this thinko.
In any case, here is a much straightforward fix for "rebase".
[jn: with test case from David]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test used 5-space indents since it was added in 2005, but
recently the temptation to use tabs to indent has been too
strong, resulting in uneven whitespace. Switch over completely
to tabs.
While at it, use a more modern style for consistency with other
tests:
- names of tests go on the same line as test_expect_success;
- extra whitespace after > redirection operators is removed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With v1.5.3.2~14 (apply --index-info: fall back to current index for
mode changes, 2007-09-17), git apply learned to stop worrying
about the lack of diff index line when a file already present in the
current index had no content change.
But it still worries too much: for rename patches, it is checking
that both the old and new filename are present in the current
index. This makes no sense, since a file rename generally
involves creating a file there was none before.
So just check the old filename.
Noticed while trying to use “git rebase” with diff.renames = copies.
[jn: add tests]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most tests in t4150 begin by navigating to a sane state and
applying some patch:
git checkout first &&
git am patch1
If a previous test left behind unmerged files or a .git/rebase-apply
directory, they are untouched and the test fails, causing later tests
to fail, too. This is not a problem in practice because none of the
tests leave a mess behind.
But as a futureproofing measure, it is still best to avoid the problem
and clean up at the start of each test. In particular, this
simplifies the process of adding new tests that are known to fail.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Place setup commands in test_expect_success blocks. This makes the
rare event of the setup commands breaking on some platform easier to
diagnose, and more importantly, it visually distinguishes where
each test begins and ends.
Instead of running test -z against the result of "git diff" command
substitution, use "git diff --exit-code", to improve output when
running with the "-v" option.
Use test_cmp in place of "test $(foo) = $(bar)" for similar reasons.
Remove whitespace after the > and < redirection operators for
consistency with other tests.
The order of arguments to test_cmp is "test_cmp expected actual".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two tests weren't about how "git reflog show <branch>" exits when
there is no reflog, but were about "checkout" and "branch" create or not
create reflog when creating a new <branch>. Update the tests to check
what we are interested in, using "git rev-parse --verify".
Also lose tests based on "test -f .git/logs/refs/heads/<branch>" from
nearby, to avoid exposing this particular implementation detail
unnecessarily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_must_fail will account for segfaults in git, so it should be used
instead of "! git"
This patch does not change any of the commands that use pipes.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two lines use the negation '!' operator to negate the result of a
simple command. Since these commands do not contain any pipes or other
complexities, the test_must_fail function can be used and is preferred
since it will additionally detect termination due to a signal.
This was noticed because the second use of '!' does not include a space
between the '!' and the opening parens. Ksh interprets this as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option adds symmetry with fast-import, enabling it to also work with
complete trees instead of just incremental changes. It works by issuing a
'deleteall' directive with each commit and then listing the full set of
files that make up that commit, rather than just showing the list of files
that have changed since the (first) parent commit. Note that this
functionality is automatically turned on when using --import-marks together
with path limiting in order to avoid dropping important but unchanged
files.
This functionality is desired when using hand-written filters along with
'fast-export | some-filter | fast-import' as it can be easier to write
<some-filter> in terms of complete trees than incremental changes.
We could avoid the need to add this option by simply always turning it on.
While the end result would be identical, it would slow things down slightly
by printing many more filenames per commit which goes somewhat against the
'fast' in 'fast-export'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since fast-export operates by listing file changes since the (first) parent
commit, when using --import-marks and path limiting and using a wider list
of paths than in previous runs, files from the new path(s) will silently be
omitted from the result unless or until a commit which explicitly changes
those files. The resulting repository in such cases is broken and makes no
sense.
This commit fixes this by having fast-export work with complete trees
instead of incremental changes (when both --import-marks and path limiting
are used). It works by issuing a 'deleteall' directive with each commit and
then listing the full set of files that make up that commit, rather than
just showing the list of files that have changed since the (first) parent
commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of saying "Finished one cherry-pick." or "Finished one revert.",
we now say "Finished cherry-pick of commit <abbreviated sha1>." or
"Finished revert of commit <abbreviated sha1>." which is more informative,
especially when cherry-picking or reverting many commits.
In case of failure the message is now "Automatic cherry-pick of commit
<abbreviated sha1> failed." instead of "Automatic cherry-pick failed."
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick foo" has always reported success with
"Finished one cherry-pick" but "cherry-pick --strategy"
does not print anything. So move the code to write that
message from do_recursive_merge() to do_cherry_pick()
so other strategies can share it.
This patch also refactors the code that prints a message
like "Automatic cherry-pick failed. <help message>". This
code was duplicated in both do_recursive_merge() and
do_pick_commit().
To do that, now do_recursive_merge() returns an int to signal
success or failure. And in case of failure we just return 1
from do_pick_commit() instead of doing "exit(1)" from either
do_recursive_merge() or do_pick_commit().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
0af0ac7 (Move MERGE_RR from .git/rr-cache/ into .git/) moved the
location of MERGE_RR but I found a few references to the old
location.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15b4f7a (merge-tree: use ll_merge() not xdl_merge(), 2010-01-16)
introduced a regression to merge-tree to cause it to segfault when merging
files which existed in one branch, but not in the other or in the
merge-base. This was caused by referencing entry->path at a time when
entry was known to be possibly-NULL.
To correct the problem, we save the path of the entry we came in with,
as the path should be the same among all the stages no matter which
sides are involved in the merge.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-tree had no test cases, so here we add some very basic tests for
it, including some known-breakages.
[jc: with obvious/trivial fixups]
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'rerere gc' prunes resolutions of conflicted merges that occurred long
time ago, and when doing so it takes the creation time of the
conflicted automerge results into account. This can cause the loss of
frequently used conflict resolutions (e.g. long-living topic branches
are merged into a regularly rebuilt integration branch (think of git's
pu)) when they become old enough to exceed 'rerere gc's threshold.
To prevent the loss of valuable merge resolutions 'rerere' will (1)
update the timestamp of the recorded conflict resolution (i.e.
'postimage') each time when encountering and resolving the same merge
conflict, and (2) take this timestamp, i.e. the time of the last usage
into account when gc'ing.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use this feature regularly you can now enable it by default. In
case the user wants to override this config on the commandline
--no-autosquash can be used to force disabling.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.
Reduce this to one loop.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: Spelling fix in protocol-capabilities.txt
checkout: accord documentation to what git does
t0005: work around strange $? in ksh when program terminated by a signal
This script is part of the second batch of tests, from the same day
the test infrastructure was added to git. Update it to use a more
modern style in the spirit of v1.6.4-rc0~45^2~2 (2009-05-22).
In particular:
- Put setup code inside test assertions, to avoid unexpected
breakages and avoid stray output without -v (as t/README
recommends); and
- Put the test title on the same line as the "test_expect_success",
and end the line with a single-quote to begin the body of the test
which is one multi-line string.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ksh93 is known to report $? of programs that terminated by a signal as
256 + signal number instead of 128 + signal number like other POSIX
compliant shells (ksh's behavior is still POSIX compliant in this regard).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fast-import stream format requires incremental changes which take place
immediately, meaning that for D->F conversions all files below the relevant
directory must be deleted before the resulting file of the same name is
created. Reversing the order can result in fast-import silently deleting
the file right after creating it, resulting in the file missing from the
resulting repository.
We correct this by first sorting the diff_queue_struct in depth-first
order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rename logic in process_renames() handles renames and merging of file
contents and then marks files as processed. However, there may be higher
stage entries left in the index for other reasons (e.g., due to D/F
conflicts). By checking for such cases and marking the entry as not
processed, it allows process_entry() later to look at it and handle those
higher stages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The D/F conflicts that can be automatically resolved (file or directory
unmodified on one side of history), have the nice property that
process_entry() can correctly handle all subpaths of the D/F conflict. In
the case of D->F conversions, it will correctly delete all non-conflicting
files below the relevant directory and the directory itself (note that both
untracked and conflicting files below the directory will prevent its
removal). So if we handle D/F conflicts after all other conflicts, they
become fairly simple to handle -- we just need to check for whether or not
a path (file/directory) is in the way of creating the new content. We do
this by having process_entry() defer handling such entries to a subsequent
process_df_entry() step.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a simple testcase where both sides of the rename are paths involved
in (separate) D/F merge conflicts
Signed-off-by: Alexander Gladysh <agladysh@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ko/master: (2325 commits)
Git 1.7.2-rc2
backmerge a few more fixes to 1.7.1.X series
fix git branch -m in presence of cross devices
t/t0006: specify timezone as EST5 not EST to comply with POSIX
add missing && to submodule-merge testcase
t/README: document more test helpers
test-date: fix sscanf type conversion
xdiff: optimise for no whitespace difference when ignoring whitespace.
gitweb: Move evaluate_gitweb_config out of run_request
parse_date: fix signedness in timezone calculation
t0006: test timezone parsing
rerere.txt: Document forget subcommand
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
...
Conflicts:
builtin-read-tree.c
Change tests to skip with skip_all=* + test_done instead of using say
+ test_done.
This is a follow-up to "tests: Skip tests in a way that makes sense
under TAP" (fadb5156e4). I missed these cases when prepearing that
patch, hopefully this is all of them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 456156d a shortcut to priming the index tree reference was
introduced, but the justification for it was completely bogus.
"read-tree -m A B" is to take the index (and the working tree)
that is largely based on (but does not have to match exactly) A
and update it to B, while carrying the local change that does
not overlap the difference between A and B, so there is no reason
to expect that the resulting index should match the tree B.
Noticed and test provided by Heiko Voigt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When test #2 fails, the cwd is project/, causing all the
remaining tests in the same script to get confused and fail.
So in the spirit of v1.7.1.1~53^2~10 (t5550-http-fetch: Use subshell
for repository operations, 2010-04-17), use a subshell for svn
working copy operations. This way, the cwd will reliably return
to the top of the trash directory and later tests can still be run
when a command has failed.
Reported-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
@ is SVN's identifier for PEG revisions. But SVN's treatment of PEG
identifiers in copy target URLs changed in r954995/r952973, i.e. between
1.6.11 and 1.6.12. They get eaten now (which is considered the right
way).
Therefore, avoid the @ in the tests with funky branch names.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
With a .gitconfig like this:
[color]
ui = auto
[color "grep"]
filename = magenta
if stdout is a terminal, the grep machinery will output the color
sequence \e[36m before each filename in its output.
In the case of "git grep -O foo", output is argv for the pager.
Disable color when calling the grep machinery in this case.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/tap:
t/README: document more test helpers
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
t/t9700/test.pl: don't access private object members, use public access methods
t9700: Use Test::More->builder, not $Test::Builder::Test
tests: Say "pass" rather than "ok" on empty lines for TAP
tests: Skip tests in a way that makes sense under TAP
test-lib: output a newline before "ok" under a TAP harness
test-lib: Make the test_external_* functions TAP-aware
test-lib: Adjust output to be valid TAP format
* maint:
backmerge a few more fixes to 1.7.1.X series
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
fix git branch -m in presence of cross devices
Conflicts:
RelNotes
builtin/rev-parse.c
The ?: operator has a lower priority than |, so the implicit associativity
made the 6th argument of parse_options be PARSE_OPT_KEEP_DASHDASH if
keep_dashdash was true discarding PARSE_OPT_STOP_AT_NON_OPTION and
PARSE_OPT_SHELL_EVAL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/receive-pack-aliased-update-fix:
check_aliased_update: strcpy() instead of strcat() to copy
receive-pack: detect aliased updates which can occur with symrefs
receive-pack: switch global variable 'commands' to a parameter
Conflicts:
t/t5516-fetch-push.sh
This implements a simple merge strategy for submodule hashes. We check
whether one side of the merge candidates is already contained in the
other and then merge automatically.
If both sides contain changes we search for a merge in the submodule.
In case a single one exists we check that out and suggest it as the
merge resolution. A list of candidates is returned when we find multiple
merges that contain both sides of the changes.
This is useful for a workflow in which the developers can publish topic
branches in submodules and a separate maintainer merges them. In case
the developers always wait until their branch gets merged before tracking
them in the superproject all merges of branches that contain submodule
changes will be resolved automatically. If developers choose to track
their feature branch the maintainer might get a conflict but git will
search the submodule for a merge and suggest it/them as a resolution.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX requires that both the timezone "standard" and "offset" be specified
in the TZ environment variable. This causes a problem on IRIX which does
not understand the timezone 'EST'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a large repository which uses directories to organize many refs,
"git pack-refs --all --prune" does not improve performance so much
as it should, unless we remove all the now-empty directories as well.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no documentation in t/README for test_must_fail,
test_might_fail, test_cmp, or test_when_finished.
Reported-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To simulate the svn cp command, it would be very useful to be
replace an arbitrary file in the current revision by an
arbitrary directory from a previous one. Modify the filemodify
command to allow that:
M 040000 <tree id> pathname
This would be most useful in combination with a facility to
print the commit ids for new revisions as they are written.
Cc: Shawn O. Pearce <spearce@spearce.org>
Cc: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no timezone is specified, we deduce the offset by
subtracting the result of mktime from our calculated
timestamp.
However, our timestamp is stored as an unsigned integer,
meaning we perform the subtraction as unsigned. For a
negative offset, this means we wrap to a very high number,
and our numeric timezone is in the millions of hours. You
can see this bug by doing:
$ TZ=EST \
GIT_AUTHOR_DATE='2010-06-01 10:00' \
git commit -a -m foo
$ git cat-file -p HEAD | grep author
author Jeff King <peff@peff.net> 1275404416 +119304128
Instead, we should perform this subtraction as a time_t, the
same type that mktime returns.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, test-date simply ignored the parsed timezone and
told show_date() to use UTC. Instead, let's print out what
we actually parsed.
While we're at it, let's make it easy for tests to work in a specific
timezone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `git submodule add' to add the new submodule <path> with `git
add --force'.
I keep my /etc in .git with a .gitignore that contains just
"*". I.e. `git status' will ignore everything that isn't in the tree
already. When I do:
git submodule add <url> hlagh
git-submodule will get as far as checking out the remote repository
into hlagh, but it'll die right afterwards when it fails to add the
new path:
The following paths are ignored by one of your .gitignore files:
hlagh
Use -f if you really want to add them.
fatal: no files added
Failed to add submodule 'hlagh'
Currently there's no way to add a submodule in this situation other
than to remove the ignored path from the .gitignore while I'm at it.
That's silly, when you run `git submodule add' you're explicitly
saying that you want to add something *new* to the repository. Instead
it should just add the path with `git add --force'.
Initially I implemented this by adding new -f and --force options to
`git submodule add'. But if the --force option isn't supplied it'll
get as far as cloning `hlagh', but won't add it.
So the first thing the user has to do is to remove `hlagh' and then
try again with the --force option.
That sucks, it should just add the path to begin with. I can't think
of any usecase where you've gone through the trouble of typing out
`git submodule add ..', but wish to be overriden by a `gitignore'. The
submodule semantics should be more like `git init', not `git add'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "Do's, don'ts & things to keep in mind" subsection to the
"Writing Tests" documentation. Much of this is based on Junio C
Hamano's "Test your stuff" section in
<7vhbkj2kcr.fsf@alter.siamese.dyndns.org>.
I turned it into a list of do's and don'ts to make it easier to skim
it, and integrated my note that a TAP harness will get confused if you
print "ok" or "not ok" at the beginning of a line.
Thad had to be fixed in 335f87871f when
TAP support was introduced.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_expect_code (which was introduced in d3bfdb75) never had any
documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was do documentation for the test_external_without_stderr and
test_external functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the test_set_prereq and
test_have_prereq functions, or the three-arg form of
test_expect_success and test_expect_failure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a unique trash directory for each test, not a single directory
as the previous documentation suggested.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file is modified due to normalization on one branch, and deleted on
another, a merge of the two branches will result in a delete/modify
conflict for that file even if it is otherwise unchanged.
Try to avoid the conflict by normalizing and comparing the "base" file
and the modified file when their sha1s differ. If they compare equal,
the file is considered unmodified and is deleted.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, merging across changes in line ending normalization is
painful since files containing CRLF will conflict with normalized files,
even if the only difference between the two versions is the line
endings. Additionally, any "real" merge conflicts that exist are
obscured because every line in the file has a conflict.
Assume you start out with a repo that has a lot of text files with CRLF
checked in (A):
o---C
/ \
A---B---D
B: Add "* text=auto" to .gitattributes and normalize all files to
LF-only
C: Modify some of the text files
D: Try to merge C
You will get a ridiculous number of LF/CRLF conflicts when trying to
merge C into D, since the repository contents for C are "wrong" wrt the
new .gitattributes file.
Fix ll-merge so that the "base", "theirs" and "ours" stages are passed
through convert_to_worktree() and convert_to_git() before a three-way
merge. This ensures that all three stages are normalized in the same
way, removing from consideration differences that are only due to
normalization.
This feature is optional for now since it changes a low-level mechanism
and is not necessary for the majority of users. The "merge.renormalize"
config variable enables it.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/decorate-color:
Add test for correct coloring of git log --decoration
Allow customizable commit decorations colors
log --decorate: Colorize commit decorations
log-tree.c: Use struct name_decoration's type for classifying decoration
commit.h: add 'type' to struct name_decoration
* cc/cherry-pick-stdin:
revert: do not rebuild argv on heap
revert: accept arbitrary rev-list options
t3508 (cherry-pick): futureproof against unmerged files
* jl/status-ignore-submodules:
Add the option "--ignore-submodules" to "git status"
git submodule: ignore dirty submodules for summary and status
Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h
* jl/maint-diff-ignore-submodules:
t4027,4041: Use test -s to test for an empty file
Add optional parameters to the diff option "--ignore-submodules"
git diff: rename test that had a conflicting name
Set options in struct rev_info directly so we can reuse the
arguments collected from parse_options without modification.
This is just a cleanup; no noticeable change is intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'v1.7.2-rc0~6^2':
DWIM 'git show -5' to 'git show --do-walk -5'
Documentation/SubmittingPatches: Fix typo in GMail section
Documentation/config: describe status.submodulesummary
This commit fixes one test in t3508 by making "cherry-pick -<num>"
walk the history.
A test update from Elijah Newren is squashed as an evil merge.
This test is accessing private object members of the Test::More and
Test::Builder objects. Older versions of Test::More did not implement
these variables using a hash.
My system complains as follows:
Can't coerce array into hash at <snip>/t/t9700/test.pl line 13.
BEGIN failed--compilation aborted at <snip>/t/t9700/test.pl line 15.
There are public access methods available for retrieving and setting these
variables, so let's use them instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Supplying backslashed, extended regular expressions to grep is not
portable. Use egrep instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration.
At the relevant moment, the repository has not been searched for yet.
Attempting to access the configuration at this point results in
git_dir being set to .git [*], which is almost certainly not what was
wanted. In particular, when run from a subdirectory of the toplevel,
git --paginate does not respect the core.pager setting from the
current repository.
[*] unless GIT_DIR or GIT_CONFIG is set
So delay the pager startup when possible:
1. run_argv() already commits pager choice inside run_builtin() if a
command is found. For commands that use RUN_SETUP, waiting until
then fixes the problem described above: once git knows where to
look, it happily respects the core.pager setting.
2. list_common_cmds_help() prints out 29 lines and exits. This can
benefit from pagination, so we need to commit the pager choice
before writing this output.
Luckily ‘git’ without subcommand has no other reason to access a
repository, so it would be intuitive to ignore repository-local
configuration in this case. Simpler for now to choose a pager
using the funny code that notices a repository that happens to be
at .git. That this accesses a repository when it is very
convenient to is a bug but not an important one.
3. help_unknown_cmd() prints out a few lines to stderr. It is not
important to paginate this, so don’t.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration. If --paginate is handled before searching for the
git dir, this configuration will be missed.
In other words, with --paginate and only with --paginate, any
repository-local core.pager setting is being ignored [*].
[*] unless the git directory is ./.git or GIT_DIR or GIT_CONFIG was
set explicitly.
Add a test to demonstrate this counterintuitive behavior. Noticed
while reading over a patch by Duy that fixes it.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test choice of pager at several stages of repository setup. This
provides some (admittedly uninteresting) examples to keep in mind when
considering changes to the setup procedure.
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current tests test pager configuration for ‘git log’, but other
commands use a different setup procedure and should therefore be
tested separately. Add a helper to make this easier.
This patch introduces the helper and changes some existing tests to
use it. The only functional change should be the introduction of ‘git
log - ’ to a few test descriptions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may segfault with too few parameters.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
$Test::Builder::Test was only made into an `our' variable in 0.94
released in September 2009, older distros are more likely to have 0.92
or earlier. Use the singleton Test::More->builder constructor instead.
The exit() call was also unportable to <0.94. Just output a meaningful
exit code if the ->is_passing method exists. The t9700-perl-git.sh
test only cares about stderr output, so this doesn't affect test
results when using older Test::More modules.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests used a mixture of 'echo -n' (which is non-portable) and either
test_cmp or diff to check if a file is empty. The much easier and portable
method to check for an empty file is '! test -s'
While we're in t4027, there was an excess test_done. Remove it.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internally, --track and --orphan still use the 'safe' -b, not -B.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lines that begin with "ok" confuse the TAP harness because it can't
distinguish them from a test counter. Work around the issue by saying
"pass" instead, which isn't a reserved TAP word.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be useful to do something like:
git rev-list --reverse master -- README | git cherry-pick -n --stdin
without using xargs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/cherry-pick-series:
Documentation/revert: describe passing more than one commit
Documentation/cherry-pick: describe passing more than one commit
revert: add tests to check cherry-picking many commits
revert: allow cherry-picking more than one commit
revert: change help_msg() to take no argument
revert: refactor code into a do_pick_commit() function
revert: use run_command_v_opt() instead of execv_git_cmd()
revert: cleanup code for -x option
* jc/rev-list-ancestry-path:
revision: Turn off history simplification in --ancestry-path mode
revision: Fix typo in --ancestry-path error message
Documentation/rev-list-options.txt: Explain --ancestry-path
Documentation/rev-list-options.txt: Fix missing line in example history graph
revision: --ancestry-path
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
As Brandon noticed, a regular expression match given to 'expr' is already
anchored at the beginning. Some versions of expr even complain about this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake "less" script was already created in a previous test titled
'setup: fake "less"', so it is redundant. Additionally, it is broken since
the redirection of 'cat' is to a file named 'less', but the chmod operates
on the file named by the $less variable which may not contain the value
'less'.
So, just remove this code, and rely on the creation of the fake "less"
script performed earlier within the test script.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake "less" script was not being made executable. This can cause the
tests that follow to fail. This failure is not apparent on platforms which
have DEFAULT_PAGER set to the string "less", since lib-pager.sh will have
set the $less variable to "less" and the SIMPLEPAGER prerequisite will have
been set, and so the "less" script will have already been created properly
and made executable in test 2 'git grep -O'. On platforms which set
DEFAULT_PAGER to something like "more", no such script will have been
previously created, and tests 7 and 8 will fail.
So, add a call to chmod to make the fake "less" script executable.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regular expressions matched by 'expr' have an implicit '^' at the beginning
of them and so are anchored to the beginning of the string. Using the '^'
character to mean "match at the beginning", is redundant and could produce
the wrong result if 'expr' implementations interpret the '^' as a literal
'^'. Additionally, GNU expr 5.97 complains like this:
expr: warning: unportable BRE: `^[a-z][a-z]*$': using `^' as the first character of the basic regular expression is not portable; it is being ignored
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
