"git config --expiry-date gc.reflogexpire" can read "2.weeks" from
the configuration and report it as a timestamp, just like "--int"
would read "1k" and report 1024, to help consumption by scripts.
* hm/config-parse-expiry-date:
config: add --expiry-date
* cc/perf-run-config:
perf: store subsection results in "test-results/$GIT_PERF_SUBSECTION/"
perf/run: show name of rev being built
perf/run: add run_subsection()
perf/run: update get_var_from_env_or_config() for subsections
perf/run: add get_subsections()
perf/run: add calls to get_var_from_env_or_config()
perf/run: add GIT_PERF_DIRS_OR_REVS
perf/run: add get_var_from_env_or_config()
perf/run: add '--config' option to the 'run' script
"git checkout --recursive" may overwrite and rewind the history of
the branch that happens to be checked out in submodule
repositories, which might not be desirable. Detach the HEAD but
still allow the recursive checkout to succeed in such a case.
* sb/submodule-recursive-checkout-detach-head:
Documentation/checkout: clarify submodule HEADs to be detached
recursive submodules: detach HEAD from new state
A few scripts (both in production and tests) incorrectly redirected
their error output. These have been corrected.
* tz/redirect-fix:
rebase: fix stderr redirect in apply_autostash()
t/lib-gpg: fix gpgconf stderr redirect to /dev/null
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
The three-way merge performed by "git cherry-pick" was confused
when a new submodule was added in the meantime, which has been
fixed (or "papered over").
* sb/test-cherry-pick-submodule-getting-in-a-way:
merge-recursive: handle addition of submodule on our side of history
t/3512: demonstrate unrelated submodule/file conflict as cherry-pick failure
"git apply --inaccurate-eof" when used with "--ignore-space-change"
triggered an internal sanity check, which has been fixed.
* rs/apply-inaccurate-eof-with-incomplete-line:
apply: update line lengths for --inaccurate-eof
When "git rebase" prepared an mailbox of changes and fed it to "git
am" to replay them, it was confused when a stray "From " happened
to be in the log message of one of the replayed changes. This has
been corrected.
* ew/rebase-mboxrd:
rebase: use mboxrd format to avoid split errors
Recent update to the refs infrastructure implementation started
rewriting packed-refs file more often than before; this has been
optimized again for most trivial cases.
* mh/avoid-rewriting-packed-refs:
files-backend: don't rewrite the `packed-refs` file unnecessarily
t1409: check that `packed-refs` is not rewritten unnecessarily
Because our test suite is not about validating the working of the
shell, it is pointless to test variations of how a literal string
'yes' is quoted when assigned to an environment variable.
Instead, test various ways to spell 'yes' (we use strcasecmp() so
uppercased and capitalized variant should work just like 'yes'
spelled in all lowercase) and make sure we take them as 'yes'. That
is more relevant in testing Git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use newly-introduced finely-grained control to teach the diff-family to
honor the new environment GIT_PRINT_SHA1_ELLIPSIS and remove the
ellipses when it is not set.
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the t4013 tests go through a list of sample command lines,
and each of them is executed and its output compared with an
expected one stored in t4013/ directory. Allow these lines to begin
with a colon followed by magic word(s) so that test conditions can
easily be tweaked.
The expected use that will happen in later steps of this is to run
tests expecting the traditional output and run the same test without
the GIT_PRINT_SHA1_ELLIPSIS=yes environment exported for (perhaps
some of) them, which will have to expect different output. Since
all of the existing tests are meant to run with the environment,
use the magic word "noellipses" to cause the variable not to be set
and exported.
As this step does not add any new test with the magic word, all
tests still run with the environment variable, expecting the
traditional output, but it will change soon.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want an ellipsis displayed following an (abbreviated) SHA-1
value.
The days when this was necessary to indicate the truncation to
lower-level Git commands and/or the user are bygone.
However, to ease the transition, the ellipsis will still be printed if
the user sets the environment variable GIT_PRINT_SHA1_ELLIPSIS to "yes".
Correct documentation with respect to what describe_detached_head prints
when GIT_PRINT_SHA1_ELLIPSIS is not set as indicated above.
Add tests for the old and new behaviour.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure the todo list ends up using single-letter command
abbreviations when the rebase.abbreviateCommands is enabled.
This configuration option should not change anything else.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 74ed43711f (grep: enable recurse-submodules to work on <tree>
objects, 2016-12-16) taught 'tree_entry_interesting()' to be able to
match across submodule boundaries in the presence of wildcards. This is
done by performing literal matching up to the first wildcard and then
punting to the submodule itself to perform more accurate pattern
matching. Instead of introducing a new flag to request this behavior,
commit 74ed43711f overloaded the already existing 'recursive' flag in
'struct pathspec' to request this behavior.
This leads to a bug where whenever any other caller has the 'recursive'
flag set as well as a pathspec with wildcards that all submodules will
be indicated as matches. One simple example of this is:
git init repo
cd repo
git init submodule
git -C submodule commit -m initial --allow-empty
touch "[bracket]"
git add "[bracket]"
git commit -m bracket
git add submodule
git commit -m submodule
git rev-list HEAD -- "[bracket]"
Fix this by introducing the new flag 'recurse_submodules' in 'struct
pathspec' and using this flag to determine if matches should be allowed
to cross submodule boundaries.
This fixes https://github.com/git-for-windows/git/issues/1371.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace use of strbuf_addf() with strbuf_add() when enumerating
loose objects in for_each_file_in_obj_subdir(). Since we already
check the length and hex-values of the string before consuming
the path, we can prevent extra computation by using the lower-
level method.
One consumer of for_each_file_in_obj_subdir() is the abbreviation
code. OID abbreviations use a cached list of loose objects (per
object subdirectory) to make repeated queries fast, but there is
significant cache load time when there are many loose objects.
Most repositories do not have many loose objects before repacking,
but in the GVFS case the repos can grow to have millions of loose
objects. Profiling 'git log' performance in GitForWindows on a
GVFS-enabled repo with ~2.5 million loose objects revealed 12% of
the CPU time was spent in strbuf_addf().
Add a new performance test to p4211-line-log.sh that is more
sensitive to this cache-loading. By limiting to 1000 commits, we
more closely resemble user wait time when reading history into a
pager.
For a copy of the Linux repo with two ~512 MB packfiles and ~572K
loose objects, running 'git log --oneline --parents --raw -1000'
had the following performance:
HEAD~1 HEAD
----------------------------------------
7.70(7.15+0.54) 7.44(7.09+0.29) -3.4%
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper print_sha1_ellipsis() that pays attention to the
GIT_PRINT_SHA1_ELLIPSIS environment variable, and prepare the tests to
unconditionally set it for the test pieces that will be broken once the code
stops showing the extra dots by default.
The removal of these dots is merely a plan at this step and has not happened
yet but soon will.
Document GIT_PRINT_SHA1_ELLIPSIS.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the documentation of diff-tree, it is stated that the -l option
"prevents rename/copy detection from running if the number of
rename/copy targets exceeds the specified number". The documentation
does not mention any special handling for the number 0, but the
implementation before commit 9f7e4bfa3b ("diff: remove silent clamp of
renameLimit", 2017-11-13) treated 0 as a special value indicating that
the rename limit is to be a very large number instead.
The commit 9f7e4bfa3b changed that behavior, treating 0 as 0. Revert
this behavior to what it was previously. This allows existing scripts
and tools that use "-l0" to continue working. The alternative (to have
"-l0" suppress rename detection) is probably much less useful, since
users can just refrain from specifying -M and/or -C to have the same
effect.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -W", "git diff -W" and their friends learned a heuristic
to extend a pre-context beyond the line that matches the "function
pattern" (aka "diff.*.xfuncname") to include a comment block, if
exists, that immediately precedes it.
* rs/include-comments-before-the-function-header:
grep: show non-empty lines before functions with -W
grep: update boundary variable for pre-context
t7810: improve check of -W with user-defined function lines
xdiff: show non-empty lines before functions with -W
xdiff: factor out is_func_rec()
t4051: add test for comments preceding function lines
"git branch --list" learned to show its output through the pager by
default when the output is going to a terminal, which is controlled
by the pager.branch configuration variable. This is similar to a
recent change to "git tag --list".
* ma/branch-list-paginate:
branch: change default of `pager.branch` to "on"
branch: respect `pager.branch` in list-mode only
t7006: add tests for how git branch paginates
"git branch" and "git checkout -b" are now forbidden from creating
a branch whose name is "HEAD".
* jc/branch-name-sanity:
builtin/branch: remove redundant check for HEAD
branch: correctly reject refs/heads/{-dash,HEAD}
branch: split validate_new_branchname() into two
branch: streamline "attr_only" handling in validate_new_branchname()
Teach diff a new algorithm, one that attempts to prevent user-specified
lines from appearing as a deletion or addition in the end result. The
end user can use this by specifying "--anchored=<text>" one or more
times when using Git commands like "diff" and "show".
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" prepared an mailbox of changes and fed it to "git
am" to replay them, it was confused when a stray "From " happened
to be in the log message of one of the replayed changes. This has
been corrected.
* ew/rebase-mboxrd:
rebase: use mboxrd format to avoid split errors
"git add --renormalize ." is a new and safer way to record the fact
that you are correcting the end-of-line convention and other
"convert_to_git()" glitches in the in-repository data.
* tb/add-renormalize:
add: introduce "--renormalize"
"git apply --inaccurate-eof" when used with "--ignore-space-change"
triggered an internal sanity check, which has been fixed.
* rs/apply-inaccurate-eof-with-incomplete-line:
apply: update line lengths for --inaccurate-eof
The three-way merge performed by "git cherry-pick" was confused
when a new submodule was added in the meantime, which has been
fixed (or "papered over").
* sb/test-cherry-pick-submodule-getting-in-a-way:
merge-recursive: handle addition of submodule on our side of history
t/3512: demonstrate unrelated submodule/file conflict as cherry-pick failure
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
A few scripts (both in production and tests) incorrectly redirected
their error output. These have been corrected.
* tz/redirect-fix:
rebase: fix stderr redirect in apply_autostash()
t/lib-gpg: fix gpgconf stderr redirect to /dev/null
The "diff" family of commands learned to ignore differences in
carriage return at the end of line.
* jc/ignore-cr-at-eol:
diff: --ignore-cr-at-eol
xdiff: reassign xpparm_t.flags bits
test_cmp_rev is a useful function that's used in quite a few test
scripts. It is however not documented in t/README. Document it.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally no longer include copyright notices in new test scripts.
However t/README still mentions it as something to include at the top of
every new script.
Remove that mention as it's outdated.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a text file had been commited with CRLF and the file is commited
again, the CRLF are kept if .gitattributs has "text=auto".
This is done by analyzing the content of the blob stored in the index:
If a '\r' is found, Git assumes that the blob was commited with CRLF.
The simple search for a '\r' does not always work as expected:
A file is encoded in UTF-16 with CRLF and commited. Git treats it as binary.
Now the content is converted into UTF-8. At the next commit Git treats the
file as text, the CRLF should be converted into LF, but isn't.
Replace has_cr_in_index() with has_crlf_in_index(). When no '\r' is found,
0 is returned directly, this is the most common case.
If a '\r' is found, the content is analyzed more deeply.
Reported-By: Ashish Negi <ashishnegi33@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add <path> <branch>', errors out when 'branch'
is not a local branch. It has no additional dwim'ing features that one
might expect.
Make it behave more like 'git checkout <branch>' when the branch doesn't
exist locally, but a remote tracking branch uniquely matches the desired
branch name, i.e. create a new branch from the remote tracking branch
and set the upstream to the remote tracking branch.
As 'git worktree add' currently just dies in this situation, there are
no backwards compatibility worries when introducing this feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add' sets up tracking branches if '<branch>' is
a remote tracking branch, and doesn't set them up otherwise, as is the
default for 'git branch'.
This may or may not be what the user wants. Allow overriding this
behaviour with a --[no-]track flag that gets passed through to 'git
branch'.
We already respect branch.autoSetupMerge, as 'git worktree' just calls
'git branch' internally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in the compilation of PCRE2 patterns under JIT (the most
common runtime configuration). Any pattern with a (*NO_JIT) verb would
segfault in any currently released PCRE2 version:
$ git grep -P '(*NO_JIT)hi.*there'
Segmentation fault
That this segfaulted was a bug in PCRE2 itself, after reporting it[1]
on pcre-dev it's been fixed in a yet-to-be-released version of
PCRE (presumably released first as 10.31). Now it'll die with:
$ git grep -P '(*NO_JIT)hi.*there'
fatal: pcre2_jit_match failed with error code -45: bad JIT option
But the cause of the bug is in our own code dating back to my
94da9193a6 ("grep: add support for PCRE v2", 2017-06-01).
As explained at more length in the comment being added here, it isn't
sufficient to just check pcre2_config() to see whether the JIT should
be used, pcre2_pattern_info() also has to be asked.
This is something I discovered myself when fiddling around with PCRE2
verbs in patterns passed to git. I don't expect that any user of git
has encountered this given the obscurity of passing PCRE2 verbs
through to the library, along with the relative obscurity of (*NO_JIT)
itself.
1. "How am I supposed to use PCRE2 JIT in the face of (*NO_JIT) ?"
(<CACBZZX5mMqDuWuFmi7sRBp3wH6CFyd-ghACukd=v0NN=rBMnJg@mail.gmail.com> &
https://lists.exim.org/lurker/thread/20171123.101502.7f0d38ca.en.html)
on the pcre-dev mailing list
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add LIBPCRE1 and LIBPCRE2 prerequisites which are true when git is
compiled with USE_LIBPCRE1=YesPlease or USE_LIBPCRE2=YesPlease,
respectively.
The syntax of PCRE1 and PCRE2 isn't the same in all cases (see
pcresyntax(3) and pcre2syntax(3)). If test are added that test for
those they'll need to be guarded by these new prerequisites.
The subsequent patch will make use of LIBPCRE2, so LIBPCRE1 isn't
strictly needed for now, but let's add it for consistency and so that
checking for it doesn't have to be done with the less obvious "PCRE,
!LIBPCRE2", which while semantically the same is more confusing, and
would lead to bugs if PCRE v3 is ever released as the tests would mean
v1, not any non-v2 version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git stash push -m foo` uses "foo" as the message for the stash. But
`git stash push -m"foo"` does not parse successfully. Similarly
`git stash push --message="My stash message"` also fails. The stash
documentation doesn't suggest this syntax should work, but gitcli
does and my fingers have learned this pattern long ago for `commit`.
Teach `git stash` to parse -mFoo and --message=Foo the same as `git
commit` would do. Even though it's an internal function, add
similar support to create_stash() for consistency.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function calls itself "required", but it does not die when it
sees an unexpected EOF.
Let's rename it to "packet_key_val_read()".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach pack-objects to use the filtering provided by the
traverse_commit_list_filtered() interface to omit unwanted
objects from the resulting packfile.
Filtering requires the use of the "--stdout" option.
Add t5317 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to use the filtering provided by the
traverse_commit_list_filtered() interface to omit
unwanted objects from the result.
Object filtering is only allowed when one of the "--objects*"
options are used.
When the "--filter-print-omitted" option is used, the omitted
objects are printed at the end. These are marked with a "~".
This option can be combined with "--quiet" to get a list of
just the omitted objects.
Add t6112 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This continues the work in commit d3b5a49 ("Tests: clean up and document
submodule helpers", 2017-11-08).
Factor out the commonalities from
test_submodule_switch_recursing_with_args() and
test_submodule_forced_switch_recursing_with_args() in
lib-submodule-update.sh, and document their usage. Some tests differ
slightly in their test assertions; I have used the superset of those
assertions in that case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various fixes to bp/fsmonitor topic.
* av/fsmonitor:
fsmonitor: simplify determining the git worktree under Windows
fsmonitor: store fsmonitor bitmap before splitting index
fsmonitor: read from getcwd(), not the PWD environment variable
fsmonitor: delay updating state until after split index is merged
fsmonitor: document GIT_TRACE_FSMONITOR
fsmonitor: don't bother pretty-printing JSON from watchman
fsmonitor: set the PWD to the top of the working tree
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Replace the mailing address of FSF to a URL, as FSF prefers.
* tz/fsf-address-update:
Replace Free Software Foundation address in license notices
Replace Free Software Foundation address in license notices
Some error messages did not quote filenames shown in it, which have
been fixed.
* sr/wrapper-quote-filenames:
wrapper.c: consistently quote filenames in error messages
"git rebase -i" recently started misbehaving when a submodule that
is configured with 'submodule.<name>.ignore' is dirty; this has
been corrected.
* bw/rebase-i-ignored-submodule-fix:
wt-status: actually ignore submodules when requested
When trying to connect to an ssh:// URL with port explicitly specified
and the ssh command configured with GIT_SSH does not support such a
setting, it is less confusing to error out than to silently suppress
the port setting and continue.
This requires updating the GIT_SSH setting in t5603-clone-dirname.sh.
That test is about the directory name produced when cloning various
URLs. It uses an ssh wrapper that ignores all its arguments but does
not declare that it supports a port argument; update it to set
GIT_SSH_VARIANT=ssh to do so. (Real-life ssh wrappers that pass a
port argument to OpenSSH would also support -G and would not require
such an update.)
Reported-by: William Yan <wyan@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user passes -4/--ipv4 or -6/--ipv6 to "git fetch" or "git push"
and the ssh command configured with GIT_SSH does not support such a
setting, error out instead of ignoring the option and continuing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Android's "repo" tool is a tool for managing a large codebase
consisting of multiple smaller repositories, similar to Git's
submodule feature. Starting with Git 94b8ae5a (ssh: introduce a
'simple' ssh variant, 2017-10-16), users noticed that it stopped
handling the port in ssh:// URLs.
The cause: when it encounters ssh:// URLs, repo pre-connects to the
server and sets GIT_SSH to a helper ".repo/repo/git_ssh" that reuses
that connection. Before 94b8ae5a, the helper was assumed to support
OpenSSH options for lack of a better guess and got passed a -p option
to set the port. After that patch, it uses the new default of a
simple helper that does not accept an option to set the port.
The next release of "repo" will set GIT_SSH_VARIANT to "ssh" to avoid
that. But users of old versions and of other similar GIT_SSH
implementations would not get the benefit of that fix.
So update the default to use OpenSSH options again, with a twist. As
observed in 94b8ae5a, we cannot assume that $GIT_SSH always handles
OpenSSH options: common helpers such as travis-ci's dpl[*] are
configured using GIT_SSH and do not accept OpenSSH options. So make
the default a new variant "auto", with the following behavior:
1. First, check for a recognized basename, like today.
2. If the basename is not recognized, check whether $GIT_SSH supports
OpenSSH options by running
$GIT_SSH -G <options> <host>
This returns status 0 and prints configuration in OpenSSH if it
recognizes all <options> and returns status 255 if it encounters
an unrecognized option. A wrapper script like
exec ssh -- "$@"
would fail with
ssh: Could not resolve hostname -g: Name or service not known
, correctly reflecting that it does not support OpenSSH options.
The command is run with stdin, stdout, and stderr redirected to
/dev/null so even a command that expects a terminal would exit
immediately.
3. Based on the result from step (2), behave like "ssh" (if it
succeeded) or "simple" (if it failed).
This way, the default ssh variant for unrecognized commands can handle
both the repo and dpl cases as intended.
This autodetection has been running on Google workstations since
2017-10-23 with no reported negative effects.
[*] 6c3fddfda1/lib/dpl/provider.rb (L215)
Reported-by: William Yan <wyan@google.com>
Improved-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify by not allowing the copied ssh wrapper to persist between
tests. This way, tests can be safely reordered, added, and removed
with less fear of hidden side effects.
This also avoids having to call setup_ssh_wrapper to restore the value
of GIT_SSH after this battery of tests, since it means each test will
restore it individually.
Noticed because on Windows, if `uplink.exe` exists, the MSYS2 Bash
will overwrite that when redirecting via `>uplink`. A proposed test
wrote a script to 'uplink' after a previous test created uplink.exe
using copy_ssh_wrapper_as, so the script written with '>uplink' had
the wrong filename and failed.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since fetch often deals with object-ids we don't have (yet),
it's an easy mistake for it to use a function like
parse_object() that gives the correct result (e.g., NULL)
but does so very slowly (because after failing to find the
object, we re-scan the pack directory looking for new
packs).
The regular test suite won't catch this because the end
result is correct, but we would want to know about
performance regressions, too. Let's add a test to the
regression suite.
Note that this uses a synthetic repository that has a large
number of packs. That's not ideal, as it means we're not
testing what "normal" users see (in fact, some of these
problems have existed for ages without anybody noticing
simply because a rescan on a normal repository just isn't
that expensive).
So what we're really looking for here is the spike you'd
notice in a pathological case (a lot of unknown objects
coming into a repo with a lot of packs). If that's fast,
then the normal cases should be, too.
Note that the test also makes liberal use of $MODERN_GIT for
setup; some of these regressions go back a ways, and we
should be able to use it to find the problems there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use fast-import only to create a large number
of objects, and then run O(n) invocations of pack-objects to
turn them into packs.
We can do this faster by just asking fast-import to
checkpoint and create a pack for each (after telling it
not to turn loose tiny packs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a function to create a bunch of irrelevant packs to
measure the expense of reprepare_packed_git(). Let's make
that available to other perf scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-empty lines before a function definition are most likely comments
for that function and thus relevant. Include them in function context.
Such a non-empty line might also belong to the preceding function if
there is no separating blank line. Stop extending the context upwards
also at the next function line to make sure only one extra function body
is shown at most.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check for function context (-W) together with user-defined function
line patterns reuses hello.c and pretends it's written in a language in
which function lines contain either "printf" or a trailing curly brace.
That's a bit obscure.
Make the test easier to read by adding a small PowerShell script, using
a simple, but meaningful expression, and separating out checks for
different aspects into dedicated tests instead of simply matching the
whole output byte for byte.
Also include a test for showing comments before function lines like git
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-empty lines before a function definition are most likely comments
for that function and thus relevant. Include them in function context.
Such a non-empty line might also belong to the preceeding function if
there is no separating blank line. Stop extending the context upwards
also at the next function line to make sure only one extra function body
is shown at most.
Original-patch-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing function context it would be helpful to show comments
immediately before declarations, as they are most likely relevant.
Add a test for that, but without specifying the choice of lines too
rigidly in the test---we may want to stop before and not include
"/*" in the future, for example.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.branch`
at all when we are not listing branches. This change will help with
listing many branches, but will not hurt users of `git branch
--edit-description` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.branch` when we are listing branches.
We have two possibilities of generalizing what that earlier commit made
to `git tag`. One is to interpret, e.g., --set-upstream-to as "it does
not use an editor, so we should page". Another, the one taken by this
commit, is to say "it does not list, so let's not page". That is in line
with the approach of the series on `pager.tag` and in particular the
wording in Documentation/git-tag.txt, which this commit reuses for
git-branch.txt.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git branch --set-upstream-to` respects `pager.branch`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next couple of commits will change how `git branch` handles
`pager.branch`, similar to how de121ffe5 (tag: respect `pager.tag` in
list-mode only, 2017-08-02) and ff1e72483 (tag: change default of
`pager.tag` to "on", 2017-08-02) changed `git tag`.
Add tests in this area to make sure that we don't regress and so that
the upcoming commits can be made clearer by adapting the tests. Add some
tests for `--list` (implied), one for `--edit-description`, and one for
`--set-upstream-to` as a representative of "something other than the
first two".
In particular, use `test_expect_failure` to document that we currently
respect the pager-configuration with `--edit-description`. The current
behavior is buggy since the pager interferes with the editor and makes
the end result completely broken. See also b3ee740c8 (t7006: add tests
for how git tag paginates, 2017-08-02).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --expiry-date as a data-type for config files when
'git config --get' is used. This will return any relative
or fixed dates from config files as timestamps.
This is useful for scripts (e.g. gc.reflogexpire) that work
with timestamps so that '2.weeks' can be converted to a format
acceptable by those scripts/functions.
Following the convention of git_config_pathname(), move
the helper function required for this feature from
builtin/reflog.c to builtin/config.c where other similar
functions exist (e.g. for --bool or --path), and match
the order of parameters with other functions (i.e. output
pointer as first parameter).
Signed-off-by: Haaris Mehmood <hsed@unimetic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mboxrd format allows the use of embedded "From " lines in
commit messages without being misinterpreted by mailsplit
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some diff implementations don't report missing newlines at the end of
files. Applying such a patch can cause a newline character to be
added inadvertently. The option --inaccurate-eof of git apply can be
used to remove trailing newlines if needed.
apply_one_fragment() cuts it off from the buffers for preimage and
postimage. Before it does, it builds an array with the lengths of each
line for both. Make sure to update the length of the last line in
these line info structures as well to keep them consistent with their
respective buffer.
Without this fix the added test fails; git apply dies and reports:
fatal: BUG: caller miscounted postlen: asked 1, orig = 1, used = 2
That sanity check is only called if whitespace changes are ignored.
Reported-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it safer to normalize the line endings in a repository.
Files that had been commited with CRLF will be commited with LF.
The old way to normalize a repo was like this:
# Make sure that there are not untracked files
$ echo "* text=auto" >.gitattributes
$ git read-tree --empty
$ git add .
$ git commit -m "Introduce end-of-line normalization"
The user must make sure that there are no untracked files,
otherwise they would have been added and tracked from now on.
The new "add --renormalize" does not add untracked files:
$ echo "* text=auto" >.gitattributes
$ git add --renormalize .
$ git commit -m "Introduce end-of-line normalization"
Note that "git add --renormalize <pathspec>" is the short form for
"git add -u --renormalize <pathspec>".
While at it, document that the same renormalization may be needed,
whenever a clean filter is added or changed.
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality to list tree objects in the order they were seen
while traversing the commits will be used in one of the next commits,
where we teach `git describe` to describe not only commits, but blobs, too.
The change in list-objects.c is rather minimal as we'll be re-using
the infrastructure put in place of the revision walking machinery. For
example one could expect that add_pending_tree is not called, but rather
commit->tree is directly passed to the tree traversal function. This
however requires a lot more code than just emptying the queue containing
trees after each commit.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for a newly added path assumed that the path was a normal file,
and thus checked for there being a directory still being in the way of
the file. Note that since unpack_trees() does path-in-the-way checks
already, the only way for there to be a directory in the way at this
point in the code, is if there is some kind of D/F conflict in the merge.
For a submodule addition on HEAD's side of history, the submodule would
have already been present. This means that we do expect there to be a
directory present but should not consider it to be "in the way"; instead,
it's the expected submodule. So, when there's a submodule addition from
HEAD's side, don't bother checking the working copy for a directory in
the way.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--format=..." option "git for-each-ref" takes learned to show
the name of the 'remote' repository and the ref at the remote side
that is affected for 'upstream' and 'push' via "%(push:remotename)"
and friends.
* js/for-each-ref-remote-name-and-ref:
for-each-ref: test :remotename and :remoteref
for-each-ref: let upstream/push report the remote ref name
for-each-ref: let upstream/push optionally report the remote name
Parts of a test to drive the long-running content filter interface
has been split into its own module, hopefully to eventually become
reusable.
* cc/git-packet-pm:
Git/Packet.pm: extract parts of t0021/rot13-filter.pl for reuse
t0021/rot13-filter: add capability functions
t0021/rot13-filter: refactor checking final lf
t0021/rot13-filter: add packet_initialize()
t0021/rot13-filter: improve error message
t0021/rot13-filter: improve 'if .. elsif .. else' style
t0021/rot13-filter: refactor packet reading functions
t0021/rot13-filter: fix list comparison
"git rebase -i" recently started misbehaving when a submodule that
is configured with 'submodule.<name>.ignore' is dirty; this has
been corrected.
* bw/rebase-i-ignored-submodule-fix:
wt-status: actually ignore submodules when requested
Some error messages did not quote filenames shown in it, which have
been fixed.
* sr/wrapper-quote-filenames:
wrapper.c: consistently quote filenames in error messages
Recent update to the refs infrastructure implementation started
rewriting packed-refs file more often than before; this has been
optimized again for most trivial cases.
* mh/avoid-rewriting-packed-refs:
files-backend: don't rewrite the `packed-refs` file unnecessarily
t1409: check that `packed-refs` is not rewritten unnecessarily
MinGW updates.
* js/mingw-redirect-std-handles:
mingw: document the standard handle redirection
mingw: optionally redirect stderr/stdout via the same handle
mingw: add experimental feature to redirect standard handles
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
A recent regression in "git rebase -i" that broke execution of git
commands from subdirectories via "exec" insn has been fixed.
* jk/rebase-i-exec-gitdir-fix:
sequencer: pass absolute GIT_DIR to exec commands
"git status --ignored -u" did not stop at a working tree of a
separate project that is embedded in an ignored directory and
listed files in that other project, instead of just showing the
directory itself as ignored.
* js/submodule-in-excluded:
status: do not get confused by submodules in excluded directories
Some codepaths did not check for errors when asking what branch the
HEAD points at, which have been fixed.
* jk/misc-resolve-ref-unsafe-fixes:
worktree: handle broken symrefs in find_shared_symref()
log: handle broken HEAD in decoration check
remote: handle broken symrefs
test-ref-store: avoid passing NULL to printf
The experimental "color moved lines differently in diff output"
feature was buggy around "ignore whitespace changes" edges, whihch
has been corrected.
* jk/diff-color-moved-fix:
diff: handle NULs in get_string_hash()
diff: fix whitespace-skipping with --color-moved
t4015: test the output of "diff --color-moved -b"
t4015: check "negative" case for "-w --color-moved"
t4015: refactor --color-moved whitespace test
"auto" as a value for the columnar output configuration ought to
judge "is the output consumed by humans?" with the same criteria as
"auto" for coloured output configuration, i.e. either the standard
output stream is going to tty, or a pager is in use. We forgot the
latter, which has been fixed.
* kd/auto-col-with-pager-fix:
column: do not include pager.c
column: show auto columns when pager is active
strbuf_check_branch_ref() is the central place where many codepaths
see if a proposed name is suitable for the name of a branch. It was
designed to allow us to get stricter than the check_refname_format()
check used for refnames in general, and we already use it to reject
a branch whose name begins with a '-'. The function gets a strbuf
and a string "name", and returns non-zero if the name is not
appropriate as the name for a branch. When the name is good, it
places the full refname for the branch with the proposed name in the
strbuf before it returns.
However, it turns out that one caller looks at what is in the strbuf
even when the function returns an error. Make the function populate
the strbuf even when it returns an error. That way, when "-dash" is
given as name, "refs/heads/-dash" is placed in the strbuf when
returning an error to copy_or_rename_branch(), which notices that
the user is trying to recover with "git branch -m -- -dash dash" to
rename "-dash" to "dash".
While at it, use the same mechanism to also reject "HEAD" as a
branch name.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other error messages from notes use stderr. Do the same when
alerting users of an unresolved notes merge.
Fix the output redirection in t3310 and t3320 as well. Previously, the
tests directed output to a file, but stderr was either not captured or
not sent to the file due to the order of the redirection operators.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 29ff1f8f74 (t: lib-gpg: flush gpg agent on startup, 2017-07-20), a
call to gpgconf was added to kill the gpg-agent. The intention was to
ignore all output from the call, but the order of the redirection needs
to be switched to ensure that both stdout and stderr are redirected to
/dev/null. Without this, gpgconf from gnupg-2.0 releases would output
'gpgconf: invalid option "--kill"' each time it was called.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set of paths output from "git status --ignored" was tied
closely with its "--untracked=<mode>" option, but now it can be
controlled more flexibly. Most notably, a directory that is
ignored because it is listed to be ignored in the ignore/exclude
mechanism can be handled differently from a directory that ends up
to be ignored only because all files in it are ignored.
* jm/status-ignored-files-list:
status: test ignored modes
status: document options to show matching ignored files
status: report matching ignored and normal untracked
status: add option to show ignored files differently
The test for '--abbrev' in t4201-shortlog.sh assumes that the commits
generated in the test can always be uniquely abbreviated to 5 hex digits
but this is not always the case. If you were unlucky and happened to run
the test at (say) Thu Jun 22 03:04:49 2017 +0000, you would find that
the first commit generated would collide with a tree object created
later in the same test.
This can be simulated in the version of t4201-shortlog.sh prior to this
commit by setting GIT_COMMITTER_DATE and GIT_AUTHOR_DATE to 1498100689
after sourcing test-lib.sh.
Change the test to test --abbrev=35 instead of --abbrev=5 to almost
completely avoid the possibility of a partial collision and add a call
to test_tick in the setup to make the test repeatable (the latter alone
is sufficient to make it robust enough).
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify and speed up the process of finding the git worktree when
running on Windows by keeping it in perl and avoiding spawning helper
processes.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ba1b9cac ("fsmonitor: delay updating state until after split index
is merged", 2017-10-27) resolved the problem of the fsmonitor data
being applied to the non-base index when reading; however, a similar
problem exists when writing the index. Specifically, writing of the
fsmonitor extension happens only after the work to split the index
has been applied -- as such, the information in the index is only
for the non-"base" index, and thus the extension information
contains only partial data.
When saving, compute the ewah bitmap before the index is split, and
store it in the fsmonitor_dirty field, mirroring the behavior that
occurred during reading. fsmonitor_dirty is kept from being leaked by
being freed when the extension data is written -- which always happens
precisely once, no matter the split index configuration.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Though the process has chdir'd to the root of the working tree, the
PWD environment variable is only guaranteed to be updated accordingly
if a shell is involved -- which is not guaranteed to be the case.
That is, if `/usr/bin/perl` is a binary, $ENV{PWD} is unchanged from
whatever spawned `git` -- if `/usr/bin/perl` is a trivial shell
wrapper to the real `perl`, `$ENV{PWD}` will have been updated to the
root of the working copy.
Update to read from the Cwd module using the `getcwd` syscall, not the
PWD environment variable. The Cygwin case is left unchanged, as it
necessarily _does_ go through a shell.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW updates.
* js/mingw-redirect-std-handles:
mingw: document the standard handle redirection
mingw: optionally redirect stderr/stdout via the same handle
mingw: add experimental feature to redirect standard handles
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
The old address is still present in t/diff-lib/COPYING. This is
intentional, as the file is used in tests and the contents are not
expected to change.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This not only prevents regressions, but also serves as documentation
what this new feature is expected to do.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the commonalities from test_submodule_switch() and
test_submodule_forced_switch() in lib-submodule-update.sh, and document
their usage.
This also makes explicit (through the KNOWN_FAILURE_FORCED_SWITCH_TESTS
variable) the fact that, currently, all functionality tested using
test_submodule_forced_switch() do not correctly handle the situation in
which a submodule is replaced with an ordinary directory.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --ignore-cr-at-eol tells the diff machinery to treat a
carriage-return at the end of a (complete) line as if it does not
exist.
Just like other "--ignore-*" options to ignore various kinds of
whitespace differences, this will help reviewing the real changes
you made without getting distracted by spurious CRLF<->LF conversion
made by your editor program.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
[jch: squashed in command line completion by Dscho]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ff6f1f564 (submodule-config: lazy-load a repository's .gitmodules
file, 2017-08-03) rebase interactive fails if there are any submodules
with unstaged changes which have been configured with a value for
'submodule.<name>.ignore' in the repository's config.
This is due to how configured values of 'submodule.<name>.ignore' are
handled in addition to a change in how the submodule config is loaded.
When the diff machinery hits a submodule (gitlink as well as a
corresponding entry in the submodule subsystem) it will read the value
of 'submodule.<name>.ignore' stored in the repository's config and if
the config is present it will clear the 'IGNORE_SUBMODULES' (which is
the flag explicitly requested by rebase interactive),
'IGNORE_UNTRACKED_IN_SUBMODULES', and 'IGNORE_DIRTY_SUBMODULES' diff
flags and then set one of them based on the configured value.
Historically this wasn't a problem because the submodule subsystem
wasn't initialized because the .gitmodules file wasn't explicitly loaded
by the rebase interactive command. So when the diff machinery hit a
submodule it would skip over reading any configured values of
'submodule.<name>.ignore'.
In order to preserve the behavior of submodules being ignored by rebase
interactive, also set the 'OVERRIDE_SUBMODULE_CONFIG' diff flag when
submodules are requested to be ignored when checking for unstaged
changes.
Reported-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And while at it let's simplify t0021/rot13-filter.pl by
using Git/Packet.pm.
This will make it possible to reuse packet related
functions in other test scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These function help read and write capabilities.
To make them more generic and make it easy to reuse them,
the following changes are made:
- we don't require capabilities to come in a fixed order,
- we allow duplicates,
- we check that the remote supports the capabilities we
advertise,
- we don't check if the remote declares any capability we
don't know about.
The reason behind the last change is that the protocol
should work using only the capabilities that both ends
support, and it should not stop working if one end starts
to advertise a new capability.
Despite those changes, we can still require a set of
capabilities, and die if one of them is not supported.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As checking for a lf character at the end of a buffer
will be useful in another function, let's refactor this
functionality into a small remove_final_lf_or_die()
helper function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor the code to initialize communication into its own
packet_initialize() function, so that we can reuse this
functionality in following patches.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is no new line at the end of something it receives,
the packet_txt_read() function die()s, but it's difficult to
debug without much context.
Let's give a bit more information when that happens.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before further refactoring the "t0021/rot13-filter.pl" script,
let's modernize the style of its 'if .. elsif .. else' clauses
to improve its readability by making it more similar to our
other perl scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible in a following commit to move packet
reading and writing functions into a Packet.pm module,
let's refactor these functions, so they don't handle
printing debug output and exiting.
While at it let's create packet_required_key_val_read()
to still handle erroring out in a common case.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since edcc8581 ("convert: add filter.<driver>.process
option", 2016-10-16) when t0021/rot13-filter.pl was created, list
comparison in this perl script have been quite broken.
packet_txt_read() returns a 2-element list, and the right hand
side of "eq" also has a list with (two, elements), but "eq" takes
the last element of the list on each side, and compares them. The
first elements (0 or 1) on the right hand side lists do not matter,
which means we do not require to see a flush at the end of the
version -- a simple empty string or an EOF would do, which is
definitely not what we want.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--push-option=<string>" option to "git push" now defaults to a
list of strings configured via push.pushOption variable.
* mp/push-pushoption-config:
builtin/push.c: add push.pushOption config
"git fetch --recurse-submodules" now knows that submodules can be
moved around in the superproject in addition to getting updated,
and finds the ones that need to be fetched accordingly.
* hv/fetch-moved-submodules-on-demand:
submodule: simplify decision tree whether to or not to fetch
implement fetching of moved submodules
fetch: add test to make sure we stay backwards compatible
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
Optimize the code to find shortest unique prefix of object names.
* ds/find-unique-abbrev-optim:
sha1_name: minimize OID comparisons during disambiguation
sha1_name: parse less while finding common prefix
sha1_name: unroll len loop in find_unique_abbrev_r()
p4211-line-log.sh: add log --online --raw --parents perf test
"git pull" has been taught to accept "--[no-]signoff" option and
pass it down to "git merge".
* wk/pull-signoff:
pull: pass --signoff/--no-signoff to "git merge"
An early part of piece-by-piece rewrite of "git bisect".
* pb/bisect-helper:
bisect--helper: `is_expected_rev` & `check_expected_revs` shell function in C
t6030: explicitly test for bisection cleanup
bisect--helper: `bisect_clean_state` shell function in C
bisect--helper: `write_terms` shell function in C
bisect--helper: rewrite `check_term_format` shell function in C
bisect--helper: use OPT_CMDMODE instead of OPT_BOOL
A hook script that is set unexecutable is simply ignored. Git
notifies when such a file is ignored, unless the message is
squelched via advice.ignoredHook configuration.
* dm/run-command-ignored-hook-advise:
run-command: add hint when a hook is ignored
The final step to make an empty string as a pathspec element
illegal. We started this by first deprecating and warning a
pathspec that has such an element in 2.11 (Nov 2016).
Hopefully we can merge this down to the 'master' by the end of the
year? A deprecation warning period that is about 1 year does not
sound too bad.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: die on empty strings as pathspec
t0027: do not use an empty string as a pathspec element
A recent regression in "git rebase -i" that broke execution of git
commands from subdirectories via "exec" insn has been fixed.
* jk/rebase-i-exec-gitdir-fix:
sequencer: pass absolute GIT_DIR to exec commands
We try to see if somebody runs our test suite with a shell that
does not support "local" like bash/dash does.
* mh/test-local-canary:
t0000: check whether the shell supports the "local" keyword
"git status --ignored -u" did not stop at a working tree of a
separate project that is embedded in an ignored directory and
listed files in that other project, instead of just showing the
directory itself as ignored.
* js/submodule-in-excluded:
status: do not get confused by submodules in excluded directories
Some codepaths did not check for errors when asking what branch the
HEAD points at, which have been fixed.
* jk/misc-resolve-ref-unsafe-fixes:
worktree: handle broken symrefs in find_shared_symref()
log: handle broken HEAD in decoration check
remote: handle broken symrefs
test-ref-store: avoid passing NULL to printf
The experimental "color moved lines differently in diff output"
feature was buggy around "ignore whitespace changes" edges, whihch
has been corrected.
* jk/diff-color-moved-fix:
diff: handle NULs in get_string_hash()
diff: fix whitespace-skipping with --color-moved
t4015: test the output of "diff --color-moved -b"
t4015: check "negative" case for "-w --color-moved"
t4015: refactor --color-moved whitespace test
"auto" as a value for the columnar output configuration ought to
judge "is the output consumed by humans?" with the same criteria as
"auto" for coloured output configuration, i.e. either the standard
output stream is going to tty, or a pager is in use. We forgot the
latter, which has been fixed.
* kd/auto-col-with-pager-fix:
column: do not include pager.c
column: show auto columns when pager is active
All other error messages in the file use quotes around the file name.
This change removes two translations as "could not write to '%s'" and
"could not close '%s'" are already translated and these two are the only
occurrences without quotes.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
[jc: adjusted tests I noticed were broken by the change]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "2>&1" notation in Powershell and in Unix shells implies that stderr
is redirected to the same handle into which stdout is already written.
Let's use this special value to allow the same trick with
GIT_REDIRECT_STDERR and GIT_REDIRECT_STDOUT: if the former's value is
`2>&1`, then stderr will simply be written to the same handle as stdout.
The functionality was suggested by Jeff Hostetler.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Particularly when calling Git from applications, such as Visual Studio's
Team Explorer, it is important that stdin/stdout/stderr are closed
properly. However, when spawning processes on Windows, those handles
must be marked as inheritable if we want to use them, but that flag is a
global flag and may very well be used by other spawned processes which
then do not know to close those handles.
Let's introduce a set of environment variables (GIT_REDIRECT_STDIN and
friends) that specify paths to files, or even better, named pipes (which
are similar to Unix sockets) and that are used by the spawned Git
process. This helps work around above-mentioned issue: those named
pipes will be opened in a non-inheritable way upon startup, and no
handles are passed around (and therefore no inherited handles need to be
closed by any spawned child).
This feature shipped with Git for Windows (marked as experimental) since
v2.11.0(2), so it has seen some serious testing in the meantime.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we replaced the old shell script based interactive rebase in
commmit 18633e1a22 ("rebase -i: use the rebase--helper builtin",
2017-02-09) we introduced a regression of functionality in that the
GIT_DIR would be sent to the environment of the exec command as-is.
This generally meant that it would be passed as "GIT_DIR=.git", which
causes problems for any exec command that wants to run git commands in
a subdirectory.
This isn't a very large regression, since it is not that likely that the
exec command will run a git command, and even less likely that it will
need to do so in a subdir. This regression was discovered by a build
system which uses git-describe to find the current version of the build
system, and happened to do so from the src/ sub directory of the
project.
Fix this by passing in the absolute path of the git directory into the
child environment.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure the helper does not crash when blank username and password is
provided. If the helper can save such credentials, it should be able to
read them back.
Signed-off-by: Jakub Bereżański <kuba@berezanscy.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5580 tests that specifying Windows UNC paths works with Git. Cygwin
supports UNC paths, albeit only using forward slashes, not backslashes,
so run the compatible tests on Cygwin as well as MinGW.
The only complication is Cygwin's `pwd`, which returns a *nix-style
path, and that's not suitable for calculating the UNC path to the
current directory. Instead use Cygwin's `cygpath` utility to get the
Windows-style path.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests around status reporting ignord files that match an exclude
pattern for both --untracked-files=normal and --untracked-files=all.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test balloon to see if we get complaints from anybody who is
using a shell that doesn't support the "local" keyword. If so, this
test can be reverted. If not, we might want to consider using "local"
in shell code throughout the git code base.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when we are deleting references, we needn't overwrite the
`packed-refs` file if the references that we are deleting only exist
as loose references. Implement this optimization as follows:
* Add a function `is_packed_transaction_needed()`, which checks
whether a given packed-refs transaction actually needs to be carried
out (i.e., it returns false if the transaction obviously wouldn't
have any effect). This function must be called while holding the
`packed-refs` lock to avoid races.
* Change `files_transaction_prepare()` to check whether the
packed-refs transaction is actually needed. If not, squelch it, but
continue holding the `packed-refs` lock until the end of the
transaction to avoid races.
This fixes a mild regression caused by dc39e09942 (files_ref_store:
use a transaction to update packed refs, 2017-09-08). Before that
commit, unnecessary rewrites of `packed-refs` were suppressed by
`repack_without_refs()`. But the transaction-based writing introduced
by that commit didn't perform that optimization.
Note that the pre-dc39e09942 code still had to *read* the whole
`packed-refs` file to determine that the rewrite could be skipped, so
the performance for the cases that the write could be elided was
`O(N)` in the number of packed references both before and after
dc39e09942. But after that commit the constant factor increased.
This commit reimplements the optimization of eliding unnecessary
`packed-refs` rewrites. That, plus the fact that since
cfa2e29c34 (packed_ref_store: get rid of the `ref_cache` entirely,
2017-03-17) we don't necessarily have to read the whole `packed-refs`
file at all, means that deletes of one or a few loose references can
now be done with `O(n lg N)` effort, where `n` is the number of loose
references being deleted and `N` is the total number of packed
references.
This commit fixes two tests in t1409.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to rewrite the `packed-refs` file except for the case
that we are deleting a reference that has a packed version. Verify
that `packed-refs` is not rewritten when it shouldn't be.
In fact, two of these tests fail:
* A new (empty) `packed-refs` file is created when deleting any loose
reference and no `packed-refs` file previously existed.
* The `packed-refs` file is rewritten unnecessarily when deleting a
loose reference that has no packed counterpart.
Both problems will be fixed in the next commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transactions to update multiple references that involves a deletion
was quite broken in an error codepath and did not abort everything
correctly.
* mh/ref-locking-fix:
files_transaction_prepare(): fix handling of ref lock failure
t1404: add a bunch of tests of D/F conflicts
We meticulously pass the `exclude` flag to the `treat_directory()`
function so that we can indicate that files in it are excluded rather
than untracked when recursing.
But we did not yet treat submodules the same way.
Because of that, `git status --ignored --untracked` with a submodule
`submodule` in a gitignored `tracked/` would show the submodule in the
"Untracked files" section, e.g.
On branch master
Untracked files:
(use "git add <file>..." to include in what will be committed)
tracked/submodule/
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/initial.t
Instead, we would want it to show the submodule in the "Ignored files"
section:
On branch master
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the commits 1fc458d9 (builtin/checkout: add --recurse-submodules
switch, 2017-03-14), 08d595dc (checkout: add --ignore-skip-worktree-bits
in sparse checkout mode, 2013-04-13) and 32669671 (checkout: introduce
--detach synonym for "git checkout foo^{commit}", 2011-02-08) checkout
gained new flags but the completion was not updated, although these flags
are useful completions. Add them.
The flags --force and --ignore-other-worktrees are not added as they are
potentially dangerous.
The flags --progress and --no-progress are only useful for scripting and are
therefore also not included.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since dc39e09942 (files_ref_store: use a transaction to update packed
refs, 2017-09-08), failure to lock a reference has been handled
incorrectly by `files_transaction_prepare()`. If
`lock_ref_for_update()` fails in the lock-acquisition loop of that
function, it sets `ret` then breaks out of that loop. Prior to
dc39e09942, that was OK, because the only thing following the loop was
the cleanup code. But dc39e09942 added another blurb of code between
the loop and the cleanup. That blurb sometimes resets `ret` to zero,
making the cleanup code think that the locking was successful.
Specifically, whenever
* One or more reference deletions have been processed successfully in
the lock-acquisition loop. (Processing the first such reference
causes a packed-ref transaction to be initialized.)
* Then `lock_ref_for_update()` fails for a subsequent reference. Such
a failure can happen for a number of reasons, such as the old SHA-1
not being correct, lock contention, etc. This causes a `break` out
of the lock-acquisition loop.
* The `packed-refs` lock is acquired successfully and
`ref_transaction_prepare()` succeeds for the packed-ref transaction.
This has the effect of resetting `ret` back to 0, and making the
cleanup code think that lock acquisition was successful.
In that case, any reference updates that were processed prior to
breaking out of the loop would be carried out (loose and packed), but
the reference that couldn't be locked and any subsequent references
would silently be ignored.
This can easily cause data loss if, for example, the user was trying
to push a new name for an existing branch while deleting the old name.
After the push, the branch could be left unreachable, and could even
subsequently be garbage-collected.
This problem was noticed in the context of deleting one reference and
creating another in a single transaction, when the two references D/F
conflict with each other, like
git update-ref --stdin <<EOF
delete refs/foo
create refs/foo/bar HEAD
EOF
This triggers the above bug because the deletion is processed
successfully for `refs/foo`, then the D/F conflict causes
`lock_ref_for_update()` to fail when `refs/foo/bar` is processed. In
this case the transaction *should* fail, but instead it causes
`refs/foo` to be deleted without creating `refs/foo`. This could
easily result in data loss.
The fix is simple: instead of just breaking out of the loop, jump
directly to the cleanup code. This fixes some tests in t1404 that were
added in the previous commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is currently not allowed, in a single transaction, to add one
reference and delete another reference if the two reference names D/F
conflict with each other (e.g., like `refs/foo/bar` and `refs/foo`).
The reason is that the code would need to take locks
$GIT_DIR/refs/foo.lock
$GIT_DIR/refs/foo/bar.lock
But the latter lock couldn't coexist with the loose reference file
$GIT_DIR/refs/foo
, because `$GIT_DIR/refs/foo` cannot be both a directory and a file at
the same time (hence the name "D/F conflict).
Add a bunch of tests that we cleanly reject such transactions.
In fact, many of the new tests currently fail. They will be fixed in
the next commit along with an explanation.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push options need to be given explicitly, via the command line as "git
push --push-option <option>". Add the config option push.pushOption,
which is a multi-valued option, containing push options that are sent
by default.
When push options are set in the lower-priority configulation file
(e.g. /etc/gitconfig, or $HOME/.gitconfig), they can be unset later in
the more specific repository config by the empty string.
Add tests and update documentation as well.
Signed-off-by: Marius Paliga <marius.paliga@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
The checkpoint command "git fast-import" did not flush updates to
refs and marks unless at least one object was created since the
last checkpoint, which has been corrected, as these things can
happen without any new object getting created.
* er/fast-import-dump-refs-on-checkpoint:
fast-import: checkpoint: dump branches/tags/marks even if object_count==0
"git fast-export" with -M/-C option issued "copy" instruction on a
path that is simultaneously modified, which was incorrect.
* jt/fast-export-copy-modify-fix:
fast-export: do not copy from modified file
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use. This has been fixed.
* nd/worktree-kill-parse-ref:
branch: fix branch renaming not updating HEADs correctly
It's possible for resolve_ref_unsafe() to return NULL (e.g.,
if we are reading and the ref does not exist), in which case
we'll pass NULL to printf. On glibc systems this produces
"(null)", but on others it may segfault.
The tests don't expect any such case, but if we ever did
trigger this, we would prefer to cleanly fail the test with
unexpected input rather than segfault. Let's manually
replace NULL with "(null)". The exact value doesn't matter,
as it won't match any possible ref the caller could expect
(and anyway, the exit code of the program will tell whether
"ref" is valid or not).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for handling whitespace with --color-moved
represents partial strings as a pair of pointers. There are
two possible conventions for the end pointer:
1. It points to the byte right after the end of the
string.
2. It points to the final byte of the string.
But we seem to use both conventions in the code:
a. we assign the initial pointers from the NUL-terminated
string using (1)
b. we eat trailing whitespace by checking the second
pointer for isspace(), which needs (2)
c. the next_byte() function checks for end-of-string with
"if (cp > endp)", which is (2)
d. in next_byte() we skip past internal whitespace with
"while (cp < end)", which is (1)
This creates fewer bugs than you might think, because there
are some subtle interactions. Because of (a) and (c), we
always return the NUL-terminator from next_byte(). But all
of the callers of next_byte() happen to handle that
gracefully.
Because of the mismatch between (d) and (c), next_byte()
could accidentally return a whitespace character right at
endp. But because of the interaction of (a) and (b), we fail
to actually chomp trailing whitespace, meaning our endp
_always_ points to a NUL, canceling out the problem.
But that does leave (b) as a real bug: when ignoring
whitespace only at the end-of-line, we don't correctly trim
it, and fail to match up lines.
We can fix the whole thing by moving consistently to one
convention. Since convention (1) is idiomatic in our code
base, we'll pick that one.
The existing "-w" and "-b" tests continue to pass, and a new
"--ignore-space-at-eol" shows off the breakage we're fixing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fa5ba2c1dd (diff: fix infinite loop with
--color-moved --ignore-space-change, 2017-10-12) added a
test to make sure that "--color-moved -b" doesn't run
forever, but the test in question doesn't actually have any
moved lines in it.
Let's scrap that test and add a variant of the existing
"--color-moved -w" test, but this time we'll check that we
find the move with whitespace changes, but not arbitrary
whitespace additions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test that lines with whitespace changes are not found by
"--color-moved" by default, but are found if "-w" is added.
Let's add one more twist: a line that has non-whitespace
changes should not be marked as a pure move.
This is perhaps an obvious case for us to get right (and we
do), but as we add more whitespace tests, they will form a
pattern of "make sure this case is a move and this other
case is not".
Note that we have to add a line to our moved block, since
having a too-small block doesn't trigger the "moved"
heuristics. And we also add a line of context to ensure
that there's more context lines than moved lines (so the
diff shows us moving the lines up, rather than moving the
context down).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for testing several different whitespace
options, let's split out the setup and cleanup steps of the
whitespace test.
While we're here, let's also switch to using "<<-" to indent
our here-documents properly, and use q_to_tab to more
explicitly mark where we expect whitespace to appear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Improve behaviour of "git fsck" upon finding a missing object.
* rs/fsck-null-return-from-lookup:
fsck: handle NULL return of lookup_blob() and lookup_tree()
In the "--format=..." option of the "git for-each-ref" command (and
its friends, i.e. the listing mode of "git branch/tag"), "%(atom:)"
(e.g. "%(refname:)", "%(body:)" used to error out. Instead, treat
them as if the colon and an empty string that follows it were not
there.
* tb/ref-filter-empty-modifier:
ref-filter.c: pass empty-string as NULL to atom parsers
Spell the name of our system as "Git" in the output from
request-pull script.
* ar/request-pull-phrasofix:
request-pull: capitalise "Git" to make it a proper noun
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
"git archive", especially when used with pathspec, stored an empty
directory in its output, even though Git itself never does so.
This has been fixed.
* rs/archive-excluded-directory:
archive: don't add empty directories to archives
In addition to "cc: <a@dd.re.ss> # cruft", "cc: a@dd.re.ss # cruft"
was taught to "git send-email" as a valid way to tell it that it
needs to also send a carbon copy to <a@dd.re.ss> in the trailer
section.
* mm/send-email-cc-cruft:
send-email: don't use Mail::Address, even if available
send-email: fix garbage removal after address
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
Running "git check-ref-format --branch @{-1}" from outside any
repository produces
$ git check-ref-format --branch @{-1}
BUG: environment.c:182: git environment hasn't been setup
This is because the expansion of @{-1} must come from the HEAD reflog,
which involves opening the repository. @{u} and @{push} (which are
more unusual because they typically would not expand to a local
branch) trigger the same assertion.
This has been broken since day one. Before v2.13.0-rc0~48^2
(setup_git_env: avoid blind fall-back to ".git", 2016-10-02), the
breakage was more subtle: Git would read reflogs from ".git" within
the current directory even if it was not a valid repository. Usually
that is harmless because Git is not being run from the root directory
of an invalid repository, but in edge cases such accesses can be
confusing or harmful. Since v2.13.0, the problem is easier to
diagnose because Git aborts with a BUG message.
Erroring out is the right behavior: when asked to interpret a branch
name like "@{-1}", there is no reasonable answer in this context.
But we should print a message saying so instead of an assertion failure.
We do not forbid "check-ref-format --branch" from outside a repository
altogether because it is ok for a script to pre-process branch
arguments without @{...} in such a context. For example, with
pre-2.13 Git, a script that does
branch='master'; # default value
parse_options
branch=$(git check-ref-format --branch "$branch")
to normalize an optional branch name provided by the user would work
both inside a repository (where the user could provide '@{-1}') and
outside (where '@{-1}' should not be accepted).
So disable the "expand @{...}" half of the feature when run outside a
repository, but keep the check of the syntax of a proposed branch
name. This way, when run from outside a repository, "git
check-ref-format --branch @{-1}" will gracefully fail:
$ git check-ref-format --branch @{-1}
fatal: '@{-1}' is not a valid branch name
and "git check-ref-format --branch master" will succeed as before:
$ git check-ref-format --branch master
master
restoring the usual pre-2.13 behavior.
[jn: split out from a larger patch; moved conditional to
strbuf_check_branch_ref instead of its caller; fleshed out commit
message; some style tweaks in tests]
Reported-by: Marko Kungla <marko.kungla@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 11b087adfd (ref-filter: consult want_color() before
emitting colors, 2017-07-13), we expect that setting
"color.ui" to "always" will enable color tag formats even
without a tty. As that commit was built on top of
136c8c8b8f (color: check color.ui in git_default_config(),
2017-07-13) from the same series, we didn't need to touch
tag's config parsing at all.
However, since we reverted 136c8c8b8f, we now need to
explicitly call git_color_default_config() to make this
work.
Let's do so, and also restore the test dropped in 0c88bf5050
(provide --color option for all ref-filter users,
2017-10-03). That commit swapped out our "color.ui=always"
test for "--color" in preparation for "always" going away.
But since it is here to stay, we should test both cases.
Note that for-each-ref also lost its color.ui support as
part of reverting 136c8c8b8f. But as a plumbing command, it
should _not_ respect the color.ui config. Since it also
gained a --color option in 0c88bf5050, that's the correct
way to ask it for color. We'll continue to test that, and
confirm that "color.ui" is not respected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 136c8c8b8f.
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit c5bdfe677c.
That commit was done primarily to prepare for the weakening
of "always" in 6be4595edb (color: make "always" the same as
"auto" in config, 2017-10-03). But since we've now reverted
6be4595edb, there's no need for us to remove "-c
color.ui=always" from the tests. And in fact it's a good
idea to restore these tests, to make sure that "always"
continues to work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6be4595edb.
That commit weakened the "always" setting of color config so
that it acted as "auto". This was meant to solve regressions
in v2.14.2 in which setting "color.ui=always" in the on-disk
config broke scripts like add--interactive, because the
plumbing diff commands began to generate color output.
This was due to 136c8c8b8f (color: check color.ui in
git_default_config(), 2017-07-13), which was in turn trying
to fix issues caused by 4c7f1819b3 (make color.ui default to
'auto', 2013-06-10). But in weakening "always", we created
even more problems, as people expect to be able to use "git
-c color.ui=always" to force color (especially because some
commands don't have their own --color flag). We can fix that
by special-casing the command-line "-c", but now things are
getting pretty confusing.
Instead of piling hacks upon hacks, let's start peeling off
the hacks. The first step is dropping the weakening of
"always", which this revert does.
Note that we could actually revert the whole series merged
in by da15b78e52. Most of that
series consists of preparations to the tests to handle the
weakening of "-c color.ui=always". But it's worth keeping
for a few reasons:
- there are some other preparatory cleanups, like
e433749d86 (test-terminal: set TERM=vt100, 2017-10-03)
- it adds "--color" options more consistently in
0c88bf5050 (provide --color option for all ref-filter
users, 2017-10-03)
- some of the cases dropping "-c" end up being more robust
and realistic tests, as in 01c94e9001 (t7508: use
test_terminal for color output, 2017-10-03)
- the preferred tool for overriding config is "--color",
and we should be modeling that consistently
We can individually revert the few commits necessary to
restore some useful tests (which will be done on top of this
patch).
Note that this isn't a pure revert; we'll keep the test
added in t3701, but mark it as failure for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
"while sh t5601-clone.sh; do :; done" seems to fail sporadically at
around test #45 where fake-ssh wrapper is copied create plink.exe,
with an error message that says the "text is busy".
I have a mild suspicion that the root cause of the bug is that the
fake SSH process from the previous test is still running by the time
the next test wants to replace it with a new binary, but in the
meantime, removing the target that could still be executing before
copying something else over seems to work it around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently added "--color-moved" feature of "diff" fell into
infinite loop when ignoring whitespace changes, which has been
fixed.
* sb/diff-color-move:
diff: fix infinite loop with --color-moved --ignore-space-change
When columns are set to automatic for git tag and the output is
paginated by git, the output is a single column instead of multiple
columns.
Standard behaviour in git is to honor auto values when the pager is
active, which happens for example with commands like git log showing
colors when being paged.
Since ff1e72483 (tag: change default of `pager.tag` to "on",
2017-08-02), the pager has been enabled by default, exposing this
problem to more people.
finalize_colopts in column.c only checks whether the output is a TTY to
determine if columns should be enabled with columns set to auto. Also
check if the pager is active.
Adding a test for git column is possible but requires some care to work
around a race on stdin. See commit 18d8c2693 (test_terminal: redirect
child process' stdin to a pty, 2015-08-04). Test git tag instead, since
that does not involve stdin, and since that was the original motivation
for this patch.
Helped-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the 'ssh' transport, the '-o' option is used to specify an
environment variable which should be set on the remote end. This allows
git to send additional information when contacting the server,
requesting the use of a different protocol version via the
'GIT_PROTOCOL' environment variable like so: "-o SendEnv=GIT_PROTOCOL".
Unfortunately not all ssh variants support the sending of environment
variables to the remote end. To account for this, only use the '-o'
option for ssh variants which are OpenSSH compliant. This is done by
checking that the basename of the ssh command is 'ssh' or the ssh
variant is overridden to be 'ssh' (via the ssh.variant config).
Other options like '-p' and '-P', which are used to specify a specific
port to use, or '-4' and '-6', which are used to indicate that IPV4 or
IPV6 addresses should be used, may also not be supported by all ssh
variants.
Currently if an ssh command's basename wasn't 'plink' or
'tortoiseplink' git assumes that the command is an OpenSSH variant.
Since user configured ssh commands may not be OpenSSH compliant, tighten
this constraint and assume a variant of 'simple' if the basename of the
command doesn't match the variants known to git. The new ssh variant
'simple' will only have the host and command to execute ([username@]host
command) passed as parameters to the ssh command.
Update the Documentation to better reflect the command-line options sent
to ssh commands based on their variant.
Reported-by: Jeffrey Yasskin <jyasskin@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tell a server that protocol v1 can be used by sending the http header
'Git-Protocol' with 'version=1' indicating this.
Also teach the apache http server to pass through the 'Git-Protocol'
header as an environment variable 'GIT_PROTOCOL'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the connection logic to tell a serve that it understands protocol
v1. This is done in 2 different ways for the builtin transports, both
of which ultimately set 'GIT_PROTOCOL' to 'version=1' on the server.
1. git://
A normal request to git-daemon is structured as
"command path/to/repo\0host=..\0" and due to a bug introduced in
49ba83fb6 (Add virtualization support to git-daemon, 2006-09-19) we
aren't able to place any extra arguments (separated by NULs) besides
the host otherwise the parsing of those arguments would enter an
infinite loop. This bug was fixed in 73bb33a94 (daemon: Strictly
parse the "extra arg" part of the command, 2009-06-04) but a check
was put in place to disallow extra arguments so that new clients
wouldn't trigger this bug in older servers.
In order to get around this limitation git-daemon was taught to
recognize additional request arguments hidden behind a second
NUL byte. Requests can then be structured like:
"command path/to/repo\0host=..\0\0version=1\0key=value\0".
git-daemon can then parse out the extra arguments and set
'GIT_PROTOCOL' accordingly.
By placing these extra arguments behind a second NUL byte we can
skirt around both the infinite loop bug in 49ba83fb6 (Add
virtualization support to git-daemon, 2006-09-19) as well as the
explicit disallowing of extra arguments introduced in 73bb33a94
(daemon: Strictly parse the "extra arg" part of the command,
2009-06-04) because both of these versions of git-daemon check for a
single NUL byte after the host argument before terminating the
argument parsing.
2. ssh://, file://
Set 'GIT_PROTOCOL' environment variable with the desired protocol
version. With the file:// transport, 'GIT_PROTOCOL' can be set
explicitly in the locally running git-upload-pack or git-receive-pack
processes. With the ssh:// transport and OpenSSH compliant ssh
programs, 'GIT_PROTOCOL' can be sent across ssh by using '-o
SendEnv=GIT_PROTOCOL' and having the server whitelist this
environment variable.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store the changed submodules paths to calculate which submodule needs
fetching. This does not work for moved submodules since their paths do
not stay the same in case of a moved submodules. In case of new
submodules we do not have a path in the current checkout, since they
just appeared in this fetch.
It is more general to collect the submodule names for changes instead of
their paths to include the above cases. If we do not have a
configuration for a gitlink we rely on constructing a default name from
the path if a git repository can be found at its path. We skip
non-configured gitlinks whose default name collides with a configured
one.
With the change described above we implement 'on-demand' fetching of
changes in moved submodules.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --color-moved code uses next_byte() to advance through
the blob contents. When the user has asked to ignore
whitespace changes, we try to collapse any whitespace change
down to a single space.
However, we enter the conditional block whenever we see the
IGNORE_WHITESPACE_CHANGE flag, even if the next byte isn't
whitespace.
This means that the combination of "--color-moved and
--ignore-space-change" was completely broken. Worse, because
we return from next_byte() without having advanced our
pointer, the function makes no forward progress in the
buffer and loops infinitely.
Fix this by entering the conditional only when we actually
see whitespace. We can apply this also to the
IGNORE_WHITESPACE change. That code path isn't buggy
(because it falls through to returning the next
non-whitespace byte), but it makes the logic more clear if
we only bother to look at whitespace flags after seeing that
the next byte is whitespace.
Reported-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert resolve_ref_unsafe to take a pointer to struct object_id by
converting one remaining caller to use struct object_id, removing the
temporary NULL pointer check in expand_ref, converting the declaration
and definition, and applying the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3.hash, E4)
+ resolve_ref_unsafe(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3->hash, E4)
+ resolve_ref_unsafe(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert peel_ref (and its corresponding backend) to struct object_id.
This transformation was done with an update to the declaration,
definition, comments, and test helper and the following semantic patch:
@@
expression E1, E2;
@@
- peel_ref(E1, E2.hash)
+ peel_ref(E1, &E2)
@@
expression E1, E2;
@@
- peel_ref(E1, E2->hash)
+ peel_ref(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert delete_ref and refs_delete_ref to take a pointer to struct
object_id. Update the documentation accordingly, including referring to
null_oid in lowercase, as it is not a #define constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge can take --signoff, but without pull passing --signoff down, it
is inconvenient to use; allow 'pull' to take the option and pass it
through.
The order of options in merge-options.txt is mostly alphabetical by
long option since 7c85d274 (Documentation/merge-options.txt: order
options in alphabetical groups, 2009-10-22). The long-option bit
didn't make it into the commit message, but it's under the fold in
[1]. I've put --signoff between --log and --stat to preserve the
alphabetical order.
[1]: https://public-inbox.org/git/87iqe7zspn.fsf@jondo.cante.net/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new perf test for testing the performance of log while computing
OID abbreviations. Using --oneline --raw and --parents options maximizes
the number of OIDs to abbreviate while still spending some time computing
diffs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An ancient bug that made Git misbehave with creation/renaming of
refs has been fixed.
* jk/refs-df-conflict:
refs_resolve_ref_unsafe: handle d/f conflicts for writes
t3308: create a real ref directory/file conflict
Improve behaviour of "git fsck" upon finding a missing object.
* rs/fsck-null-return-from-lookup:
fsck: handle NULL return of lookup_blob() and lookup_tree()
"git for-each-ref --format=..." learned a new format element,
%(trailers), to show only the commit log trailer part of the log
message.
* tb/show-trailers-in-ref-filter:
ref-filter.c: parse trailers arguments with %(contents) atom
ref-filter.c: use trailer_opts to format trailers
t6300: refactor %(trailers) tests
doc: use "`<literal>`"-style quoting for literal strings
doc: 'trailers' is the preferred way to format trailers
t4205: unfold across multiple lines
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of submodules supports on-demand fetch if
there is no .gitmodules entry for a submodule. Let's add a test to
document this behavior.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "--format=..." option of the "git for-each-ref" command (and
its friends, i.e. the listing mode of "git branch/tag"), "%(atom:)"
(e.g. "%(refname:)", "%(body:)" used to error out. Instead, treat
them as if the colon and an empty string that follows it were not
there.
* tb/ref-filter-empty-modifier:
ref-filter.c: pass empty-string as NULL to atom parsers
Fix regression of "git add -p" for users with "color.ui = always"
in their configuration, by merging the topic below and adjusting it
for the 'master' front.
* jk/ui-color-always-to-auto:
t7301: use test_terminal to check color
t4015: use --color with --color-moved
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
