The underlying plumbing commands are not run with -z option, so the paths
returned from them need to be unquoted as needed.
Remove the now stale BUGS section from git-add documentaiton as suggested
by Teemu Likonen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-add -i ranges expect number-number. But for the supremely lazy, typing in
that second number when selecting "from patch 7 to the end" is wasted effort.
So treat an empty second number in a range as "until the last item".
Signed-off-by: Ciaran McCreesh <ciaran.mccreesh@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a new option 'e' to the 'add -p' command loop that lets you edit
the current hunk in your favourite editor.
If the resulting patch applies cleanly, the edited hunk will
immediately be marked for staging. If it does not apply cleanly, you
will be given an opportunity to edit again. If all lines of the hunk
are removed, then the edit is aborted and the hunk is left unchanged.
Applying the changed hunk(s) relies on Johannes Schindelin's new
--recount option for git-apply.
Note that the "real patch" test intentionally uses
(echo e; echo n; echo d) | git add -p
even though the 'n' and 'd' are superfluous at first sight. They
serve to get out of the interaction loop if git add -p wrongly
concludes the patch does not apply.
Many thanks to Jeff King <peff@peff.net> for lots of help and
suggestions.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the conversion of HTML documentation to man pages
tutorial.html -> gittutorial (7)
tutorial-2.html -> gittutorial-2 (7)
cvs-migration.html -> gitcvs-migration (7)
diffcore.html -> gitdiffcore (7)
repository-layout.html -> gitrepository-layout (5)
hooks.html -> githooks (5)
glossary.html -> gitglossary (7)
core-tutorial.html -> gitcore-tutorial (7)
and the automatic update of references to these pages,
a little debris was left behind. We clear it away.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option -u stands for --update and it is a good idea to make it clear
especially because this is the only mode of operation of "git add" that
does something different from "adding". Give longer --force synonym to -f
while we are at it as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man format:
diffcore.txt -> gitdiffcore.txt (man section 7)
repository-layout.txt -> gitrepository-layout.txt (man section 5)
Other documents that reference the above ones are changed accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-u" option is described only in terms of "updating"
files, which in turn is described only as "similar to what
git commit -a does". Let's be a little more specific about
what updating entails.
Suggested by Geoffrey Irving.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch in "git-add.txt" and "git-format-patch.txt", the
commands used in the examples were "git-CMD" instead of "git CMD".
This patch fixes that.
In "git-pull.txt" only the last example had the code sample in an
asciidoc "Listing Block", and in the other two files, none.
This patch fixes that by putting all code samples in listing
blocks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive mode does not work with files whose names contain
characters that need C-quoting. `core.quotepath` configuration can be
used to work this limitation around to some degree, but backslash,
double-quote and control characters will still have problems.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wording of the interactive help text from git-add--interactive.perl is
clearer. Just duplicate that text here.
Signed-off-by: Vineet Kumar <vineet@doorstop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-add documentation did not state clearly that the -u switch
updates only the tracked files that are in the current directory and
its subdirectories.
Signed-off-by: Pekka Kaitaniemi <kaitanie@cc.helsinki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An item in a bulletted list in AsciiDoc is followed with two colons,
not just one.
Signed-off-by: Eyvind Bernhardsen <eyvind-git@orakel.ntnu.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "--patch" option is supplied, the patch_update_cmd() function is
called bypassing the main_loop() and exits.
Seeing as builtin-add is the only caller of git-add--interactive we can
impose a strict requirement on the format of the arguments to avoid
possible ambiguity: an "--" argument must be used whenever any pathspecs
are passed, both with the "--patch" option and without it.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Conflicts:
fast-import.c
The message in git-commit suggesting to use 'git rm --cached'
to unstage is just plain wrong. It really should mention 'git reset'.
Suggested by Jan Hudec.
Signed-off-by: Jing Xue <jingxue@digizenstudio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think the trick with Git-side filename globbing is important and perhaps
not that well known. Clarify a bit in git-add documentation what it means.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string for the executable was missing --refresh. In
addition, the documentation referred to "file", but the usage string
referred to "filepattern". Updated the documentation to
"filepattern", as git-add does handle patterns.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was a neat trick to show that you could introduce the git-add manual
page without using the word "index", and it was certainly an improvement
over the previous man page (which started out "A simple wrapper for
git-update-index to add files to the index...").
But it's possible to use the standard terminology without sacrificing
user-friendliness. So, rewrite to use the word "index" when
appropriate.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the discussion of core.excludesfile in the user-manual, I realized
that the configuration wasn't mentioned in the man pages.
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command was implemented, but not documented in
dfdac5d9b8.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of just warning, refuse to add otherwise ignored files
by default, and allow it with an -f option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
One thing many people found confusing about git-add was that a
file whose name matches an ignored pattern could not be added to
the index. With this, such a file can be added by explicitly
spelling its name to git-add.
Fileglobs and recursive behaviour do not add ignored files to
the index. That is, if a pattern '*.o' is in .gitignore, and
two files foo.o, bar/baz.o are in the working tree:
$ git add foo.o
$ git add '*.o'
$ git add bar
Only the first form adds foo.o to the index.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This brings the power of the index up front using a proper mental model
without talking about the index at all. See for example how all the
technical discussion has been evacuated from the git-add man page.
Any content to be committed must be added together. Whether that
content comes from new files or modified files doesn't matter. You
just need to "add" it, either with git-add, or by providing
git-commit with -a (for already known files only of course).
No need for a separate command to distinguish new vs modified files
please. That would only screw the mental model everybody should have
when using GIT.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
