Nobody in the active development community seems to watch breakages
in the rpmbuild target. As most major RPM based distros use their
own specfile when packaging us, they aren't looking after us as
their pristine upstream tree, either. At this point, it is turning
to be a disservice to the users to pretend that our tree natively
supports "make rpmbuild" target when we do not properly maintain it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general "echo 2>&1 $msg" to redirect a possible error message
that comes from 'echo' itself into the same standard output stream
$msg is getting written to does not make any sense; it is not like
we are expecting to see any errors out of 'echo' in these statements,
and even if it were the case, there is no reason to prevent the
error messages from being sent to the standard error stream.
These are clearly meant to send the argument given to echo to the
standard error stream as error messages. Correctly redirect by
saying "send what is written to the standard output to the standard
error", i.e. "1>&2" aka ">&2".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of GNU grep is pickier than before to decide if a
file is "binary" and refuse to give line-oriented hits when we
expect it to, unless explicitly told with "-a" option. As our
scripted Porcelains use sane_grep wrapper for line-oriented data,
even when the line may contain non-ASCII payload we took from
end-user data, use "grep -a" to implement sane_grep wrapper when
using an implementation of "grep" that takes the "-a" option.
* jc/sane-grep:
rebase-i: clarify "is this commit relevant?" test
sane_grep: pass "-a" if grep accepts it
Newer versions of GNU grep is reported to be pickier when we feed a
non-ASCII input and break some Porcelain scripts. As we know we do
not feed random binary file to our own sane_grep wrapper, allow us
to always pass "-a" by setting SANE_TEXT_GREP=-a Makefile variable
to work it around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a new DEVELOPER knob that enables many compiler warning
options in the Makefile.
* ls/makefile-cflags-developer-tweak:
add DEVELOPER makefile knob to check for acknowledged warnings
We assume Git developers have a reasonably modern compiler and recommend
them to enable the DEVELOPER makefile knob to ensure their patches are
clear of all compiler warnings the Git core project cares about.
Enable the DEVELOPER makefile knob in the Travis-CI build.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test scripts have been updated to remove assumptions that are not
portable between Git for POSIX and Git for Windows, or to skip ones
with expectations that are not satisfiable on Git for Windows.
* js/mingw-tests: (21 commits)
gitignore: ignore generated test-fake-ssh executable
mingw: do not bother to test funny file names
mingw: skip a test in t9130 that cannot pass on Windows
mingw: handle the missing POSIXPERM prereq in t9124
mingw: avoid illegal filename in t9118
mingw: mark t9100's test cases with appropriate prereqs
t0008: avoid absolute path
mingw: work around pwd issues in the tests
mingw: fix t9700's assumption about directory separators
mingw: skip test in t1508 that fails due to path conversion
tests: turn off git-daemon tests if FIFOs are not available
mingw: disable mkfifo-based tests
mingw: accomodate t0060-path-utils for MSYS2
mingw: fix t5601-clone.sh
mingw: let lstat() fail with errno == ENOTDIR when appropriate
mingw: try to delete target directory before renaming
mingw: prepare the TMPDIR environment variable for shell scripts
mingw: factor out Windows specific environment setup
Git.pm: stop assuming that absolute paths start with a slash
mingw: do not trust MSYS2's MinGW gettext.sh
...
Since baaf233 (connect: improve check for plink to reduce false
positives, 2015-04-26), t5601 writes out a `plink.exe` for testing that
is actually a shell script. So the assumption that the `.exe` extension
implies that the file is *not* a shell script is now wrong.
Since there was no love for the idea of allowing `.exe` files to be
shell scripts on Windows, let's go the other way round: *make*
`plink.exe` a real `.exe`.
This fixes t5601-clone.sh in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code preparation for pluggable ref backends.
* dt/refs-backend-pre-vtable:
refs: break out ref conflict checks
files_log_ref_write: new function
initdb: make safe_create_dir public
refs: split filesystem-based refs code into a new file
refs/refs-internal.h: new header file
refname_is_safe(): improve docstring
pack_if_possible_fn(): use ref_type() instead of is_per_worktree_ref()
copy_msg(): rename to copy_reflog_msg()
verify_refname_available(): new function
verify_refname_available(): rename function
Apple's common crypto implementation of SHA1_Update() does not take
more than 4GB at a time, and we now have a compile-time workaround
for it.
* ad/sha1-update-chunked:
sha1: allow limiting the size of the data passed to SHA1_Update()
sha1: provide another level of indirection for the SHA-1 functions
Apple's common crypto implementation of SHA1_Update() does not take
more than 4GB at a time, and we now have a compile-time workaround
for it.
* ad/sha1-update-chunked:
sha1: allow limiting the size of the data passed to SHA1_Update()
sha1: provide another level of indirection for the SHA-1 functions
As another step in the move to pluggable reference backends, move the
code that is specific to the filesystem-based reference backend (i.e.,
the current system of storing references as loose and packed files) into
a separate file, refs/files-backend.c.
Aside from a tiny bit of file header boilerplate, this commit only moves
a subset of the code verbatim from refs.c to the new file, as can easily
be verified using patience diff:
git diff --patience $commit^:refs.c $commit:refs.c
git diff --patience $commit^:refs.c $commit:refs/files-backend.c
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
The linkage order of libraries was wrong in places around libcurl.
* rp/link-curl-before-ssl:
configure.ac: detect ssl need with libcurl
Makefile: make curl-config path configurable
Makefile: link libcurl before zlib
Using the previous commit's inredirection mechanism for SHA1,
support a chunked implementation of SHA1_Update() that limits the
amount of data in the chunk passed to SHA1_Update().
This is enabled by using the Makefile variable SHA1_MAX_BLOCK_SIZE
to specify chunk size. When using Apple's CommonCrypto library this
is set to 1GiB (the implementation cannot handle more 4GiB).
Signed-off-by: Atousa Pahlevan Duprat <apahlevan@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of "git mailinfo" was refactored so that a
mailinfo() function can be directly called from inside a process.
* jc/mailinfo-lib: (34 commits)
mailinfo: remove calls to exit() and die() deep in the callchain
mailinfo: handle charset conversion errors in the caller
mailinfo: libify
mailinfo: keep the parsed log message in a strbuf
mailinfo: handle_commit_msg() shouldn't be called after finding patchbreak
mailinfo: move content/content_top to struct mailinfo
mailinfo: move [ps]_hdr_data to struct mailinfo
mailinfo: move cmitmsg and patchfile to struct mailinfo
mailinfo: move charset to struct mailinfo
mailinfo: move transfer_encoding to struct mailinfo
mailinfo: move check for metainfo_charset to convert_to_utf8()
mailinfo: move metainfo_charset to struct mailinfo
mailinfo: move use_scissors and use_inbody_headers to struct mailinfo
mailinfo: move add_message_id and message_id to struct mailinfo
mailinfo: move patch_lines to struct mailinfo
mailinfo: move filter/header stage to struct mailinfo
mailinfo: move global "FILE *fin, *fout" to struct mailinfo
mailinfo: move keep_subject & keep_non_patch_bracket to struct mailinfo
mailinfo: introduce "struct mailinfo" to hold globals
mailinfo: move global "line" into mailinfo() function
...
The linkage order of libraries was wrong in places around libcurl.
* rp/link-curl-before-ssl:
configure.ac: detect ssl need with libcurl
Makefile: make curl-config path configurable
Makefile: link libcurl before zlib
Add the "list" subcommand to "git worktree".
* mr/worktree-list:
worktree: add 'list' command
worktree: add details to the worktree struct
worktree: add a function to get worktree details
worktree: refactor find_linked_symref function
worktree: add top-level worktree.c
Move the bulk of the code from builtin/mailinfo.c to mailinfo.c
so that new callers can start calling mailinfo() directly.
Note that a few calls to exit() and die() need to be cleaned up
for the API to be truly useful, which will come in later steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are situations, e.g. during cross compilation, where curl-config
program is not present in the PATH.
Make the makefile use a configurable curl-config program passed through
CURL_CONFIG variable which can be set through config.mak.
Also make this variable tunable through use of autoconf/configure. Configure
will set CURL_CONFIG variable in config.mak.autogen to whatever value has been
passed to ac_cv_prog_CURL_CONFIG.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For static linking especially library order while linking is important. For
example, libcurl wants symbols from zlib when building http-push, http-fetch
and remote-curl. So for these programs libcurl has to be linked before zlib.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
Customization to change the behaviour with "make -w" and "make -s"
in our Makefile was broken when they were used together.
* jk/make-findstring-makeflags-fix:
Makefile: fix MAKEFLAGS tests with multiple flags
The Makefile always runs the library archiver with hardcoded "crs"
options, which was inconvenient for exotic platforms on which
people want to use programs with totally different set of command
line options.
* jw/make-arflags-customizable:
Makefile: allow $(ARFLAGS) specified from the command line
The Makefile always runs the library archiver with hardcoded "crs"
options, which was inconvenient for exotic platforms on which
people want to use programs with totally different set of command
line options.
* jw/make-arflags-customizable:
Makefile: allow $(ARFLAGS) specified from the command line
Customization to change the behaviour with "make -w" and "make -s"
in our Makefile was broken when they were used together.
* jk/make-findstring-makeflags-fix:
Makefile: fix MAKEFLAGS tests with multiple flags
The infrastructure to rewrite "git submodule" in C is being built
incrementally. Let's polish these early parts well enough and make
them graduate to 'next' and 'master', so that the more involved
follow-up can start cooking on a solid ground.
* sb/submodule-helper:
submodule: rewrite `module_clone` shell function in C
submodule: rewrite `module_name` shell function in C
submodule: rewrite `module_list` shell function in C
Now that fsck has dropped its inode-sorting, there are no
longer any users of this knob, and it can go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree.c contains functions to work with and get information from
worktrees. This introduction moves functions related to worktrees
from branch.c into worktree.c
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-POSIX shells, such as /bin/sh on SunOS, do not support $((...))
arithmetic expansion or $(...) command substitution needed by
generate-cmdlist.sh. Make sure that we use a POSIX compliant shell
$(SHELL_PATH) when running generate-cmdlist.sh.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can do this because we have a very simple needs and run "ar"
exactly the same way everywhere ;-).
Requested-by: Jeffrey Walton
Signed-off-by: Junio C Hamano <gitster@pobox.com>
findstring is defined as $(findstring FIND,IN) so if multiple flags are
set these tests do the wrong thing unless $(MAKEFLAGS) is the second
argument.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the submodule operations work on a set of submodules.
Calculating and using this set is usually done via:
module_list "$@" | {
while read mode sha1 stage sm_path
do
# the actual operation
done
}
Currently the function `module_list` is implemented in the
git-submodule.sh as a shell script wrapping a perl script.
The rewrite is in C, such that it is faster and can later be
easily adapted when other functions are rewritten in C.
git-submodule.sh, similar to the builtin commands, will navigate
to the top-most directory of the repository and keep the
subdirectory as a variable. As the helper is called from
within the git-submodule.sh script, we are already navigated
to the root level, but the path arguments are still relative
to the subdirectory we were in when calling git-submodule.sh.
That's why there is a `--prefix` option pointing to an alternative
path which to anchor relative path arguments.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitmodules API accessed from the C code learned to cache stuff
lazily.
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
527ec39 (generate-cmdlist: parse common group commands, 2015-05-21)
replaced generate-cmdlist.sh with a more functional Perl version,
generate-cmdlist.perl. The Perl version gleans named tags from a new
"common groups" section in command-list.txt and recognizes those
tags in "command list" section entries in place of the old 'common'
tag. This allows git-help to, not only recognize, but also group
common commands.
Although the tests require Perl, 527ec39 creates an unconditional
dependence upon Perl in the build system itself, which can not be
overridden with NO_PERL. Such a dependency may be undesirable; for
instance, the 'git-lite' package in the FreeBSD ports tree is
intended as a minimal Git installation (which may, for example, be
useful on servers needing only local clone and update capability),
which, historically, has not depended upon Perl[1].
Therefore, revive generate-cmdlist.sh and extend it to recognize
"common groups" and its named tags. Retire generate-cmdlist.perl.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/275905/focus=276132
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
In a superproject some commands need to interact with submodules. They
need to query values from the .gitmodules file either from the worktree
of from certain revisions. At the moment this is quite hard since a
caller would need to read the .gitmodules file from the history and then
parse the values. We want to provide an API for this so we have one
place to get values from .gitmodules from any revision (including the
worktree).
The API is realized as a cache which allows us to lazily read
.gitmodules configurations by commit into a runtime cache which can then
be used to easily lookup values from it. Currently only the values for
path or name are stored but it can be extended for any value needed.
It is expected that .gitmodules files do not change often between
commits. Thats why we lookup the .gitmodules sha1 from a commit and then
either lookup an already parsed configuration or parse and cache an
unknown one for each sha1. The cache is lazily build on demand for each
requested commit.
This cache can be used for all purposes which need knowledge about
submodule configurations. Example use cases are:
* Recursive submodule checkout needs to lookup a submodule name from
its path when a submodule first appears. This needs be done before
this configuration exists in the worktree.
* The implementation of submodule support for 'git archive' needs to
lookup the submodule name to generate the archive when given a
revision that is not checked out.
* 'git fetch' when given the --recurse-submodules=on-demand option (or
configuration) needs to lookup submodule names by path from the
database rather than reading from the worktree. For new submodule it
needs to lookup the name from its path to allow cloning new
submodules into the .git folder so they can be checked out without
any network interaction when the user does a checkout of that
revision.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of work went into defining the state diagram for lockfiles and
ensuring correct, race-resistant cleanup in all circumstances.
Most of that infrastructure can be applied directly to *any* temporary
file. So extract a new "tempfile" module from the "lockfile" module.
Reimplement lockfile on top of tempfile.
Subsequent commits will add more users of the new module.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of the rewrite of git-am.sh to C, in order to not break
existing test scripts that depended on a functional git-am, a
redirection to git-am.sh was introduced that would activate if the
environment variable _GIT_USE_BUILTIN_AM was not defined.
Now that all of git-am.sh's functionality has been re-implemented in
builtin/am.c, remove this redirection, and retire git-am.sh into
contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-am.sh into a C builtin, implement a
skeletal builtin/am.c that redirects to $GIT_EXEC_PATH/git-am if the
environment variable _GIT_USE_BUILTIN_AM is not defined. Since in the
Makefile git-am.sh takes precedence over builtin/am.c,
$GIT_EXEC_PATH/git-am will contain the shell script git-am.sh, and thus
this allows us to fall back on the functional git-am.sh when running the
test suite for tests that depend on a working git-am implementation.
Since git-am.sh cannot handle any environment modifications by
setup_git_directory(), "am" is declared with no setup flags in git.c. On
the other hand, to re-implement git-am.sh in builtin/am.c, we need to
run all the git dir and work tree setup logic that git.c typically does
for us. As such, we work around this temporarily by copying the logic in
git.c's run_builtin(), which is roughly:
prefix = setup_git_directory();
trace_repo_setup(prefix);
setup_work_tree();
This redirection should be removed when all the features of git-am.sh
have been re-implemented in builtin/am.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement 'git pull' in C.
* pt/pull-builtin:
pull: remove redirection to git-pull.sh
pull --rebase: error on no merge candidate cases
pull --rebase: exit early when the working directory is dirty
pull: configure --rebase via branch.<name>.rebase or pull.rebase
pull: teach git pull about --rebase
pull: set reflog message
pull: implement pulling into an unborn branch
pull: fast-forward working tree if head is updated
pull: check if in unresolved merge state
pull: support pull.ff config
pull: error on no merge candidates
pull: pass git-fetch's options to git-fetch
pull: pass git-merge's options to git-merge
pull: pass verbosity, --progress flags to fetch and merge
pull: implement fetch + merge
pull: implement skeletal builtin pull
argv-array: implement argv_array_pushv()
parse-options-cb: implement parse_opt_passthru_argv()
parse-options-cb: implement parse_opt_passthru()
GSoC project to rebuild ref listing by branch and tag based on the
for-each-ref machinery. This is its first part.
* kn/for-each-ref:
ref-filter: make 'ref_array_item' use a FLEX_ARRAY for refname
for-each-ref: introduce filter_refs()
ref-filter: move code from 'for-each-ref'
ref-filter: add 'ref-filter.h'
for-each-ref: rename variables called sort to sorting
for-each-ref: rename some functions and make them public
for-each-ref: introduce 'ref_array_clear()'
for-each-ref: introduce new structures for better organisation
for-each-ref: rename 'refinfo' to 'ref_array_item'
for-each-ref: clean up code
for-each-ref: extract helper functions out of grab_single_ref()
Move most of the code from 'for-each-ref' to 'ref-filter' to make
it publicly available to other commands, this is to unify the code
of 'tag -l', 'branch -l' and 'for-each-ref' so that they can share
their implementations with each other.
Add 'ref-filter' to the Makefile, this completes the movement of code
from 'for-each-ref' to 'ref-filter'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
At the beginning of the rewrite of git-pull.sh to C, we introduced a
redirection to git-pull.sh if the environment variable
_GIT_USE_BUILTIN_PULL was not defined in order to not break test scripts
that relied on a functional git-pull.
Now that all of git-pull's functionality has been re-implemented in
builtin/pull.c, remove this redirection, and retire the old git-pull.sh
into contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-pull.sh into a C builtin, implement a
skeletal builtin/pull.c that redirects to $GIT_EXEC_PATH/git-pull.sh if
the environment variable _GIT_USE_BUILTIN_PULL is not defined. This
allows us to fall back on the functional git-pull.sh when running the
test suite for tests that depend on a working git-pull implementation.
This redirection should be removed when all the features of git-pull.sh
have been re-implemented in builtin/pull.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
Group list of commands shown by "git help" along the workflow
elements to help early learners.
* sg/help-group:
help: respect new common command grouping
command-list.txt: drop the "common" tag
generate-cmdlist: parse common group commands
command-list.txt: add the common groups block
command-list: prepare machinery for upcoming "common groups" section
Every time we run "make", we update perl/PM.stamp, which
contains a list of all of the perl module files (if it's
updated, we need to rebuild perl/perl.mak, since the
Makefile will not otherwise know about the new files).
This means that every time "make" is run, we see:
GEN perl/PM.stamp
in the output, even though it is not likely to have changed.
Let's make this recipe completely silent, as we do for other
auto-generated dependency files (e.g., GIT-CFLAGS).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We force the GIT-BUILD-OPTIONS recipe to run every time
"make" is invoked. We must do this to catch new options
which may have come from the command-line or environment.
However, we actually update the file's timestamp each time
the recipe is run, whether anything changed or not. As a
result, any files which depend on it (for example, all of
the perl scripts, which need to know whether NO_PERL was
set) will be re-built every time.
Let's do our usual trick of writing to a tempfile, then
doing a "cmp || mv" to update the file only when something
changed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rule for "git-instaweb" depends on "gitweb". This makes
no sense, because:
1. git-instaweb has no build-time dependency on gitweb; it
is a run-time dependency
2. gitweb is a directory that we want to recursively make
in. As a result, its recipe is marked .PHONY, which
causes "make" to rebuild git-instaweb every time it is
run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
Parse the group block to create the array of group descriptions:
static char *common_cmd_groups[] = {
N_("starting a working area"),
N_("working on the current change"),
N_("working with others"),
N_("examining the history and state"),
N_("growing, marking and tweaking your history"),
};
then map each element of common_cmds[] to a group via its index:
static struct cmdname_help common_cmds[] = {
{"add", N_("Add file contents to the index"), 1},
{"branch", N_("List, create, or delete branches"), 4},
{"checkout", N_("Checkout a branch or paths to the ..."), 4},
{"clone", N_("Clone a repository into a new directory"), 0},
{"commit", N_("Record changes to the repository"), 4},
...
};
so that 'git help' can print those commands grouped by theme.
Only commands tagged with an attribute from the group block are emitted to
common_cmds[].
[commit message by Sébastien Guimmara <sebastien.guimmara@gmail.com>]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ultimate goal is for "git help" to classify common commands by
group. Toward this end, a subsequent patch will add a new "common
groups" section to command-list.txt preceding the actual command list.
As preparation, teach existing command-list.txt parsing machinery, which
doesn't care about grouping, to skip over this upcoming "common groups"
section.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We spend a lot of time in strbuf_getwholeline in a tight
loop reading characters from a stdio handle into a buffer.
The libc getdelim() function can do this for us with less
overhead. It's in POSIX.1-2008, and was a GNU extension
before that. Therefore we can't rely on it, but can fall
back to the existing getc loop when it is not available.
The HAVE_GETDELIM knob is turned on automatically for Linux,
where we have glibc. We don't need to set any new
feature-test macros, because we already define _GNU_SOURCE.
Other systems that implement getdelim may need to other
macros (probably _POSIX_C_SOURCE >= 200809L), but we can
address that along with setting the Makefile knob after
testing the feature on those systems.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from
(best-of-5):
real 0m8.601s
user 0m8.084s
sys 0m0.524s
to:
real 0m6.768s
user 0m6.340s
sys 0m0.432s
for a wall-clock speedup of 21%.
Based on a patch from Rasmus Villemoes <rv@rasmusvillemoes.dk>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We now detect number of CPUs on older BSD-derived systems.
* km/bsd-sysctl:
thread-utils.c: detect CPU count on older BSD-like systems
configure: support HAVE_BSD_SYSCTL option
On BSD-compatible systems some information such as the number
of available CPUs may only be available via the sysctl function.
Add support for a HAVE_BSD_SYSCTL option complete with autoconf
support and include the sys/syctl.h header when the option is
enabled to make the sysctl function available.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain older vintages of cURL give irregular output from
"curl-config --vernum", which confused our build system.
* tc/curl-vernum-output-broken-in-7.11:
Makefile: handle broken curl version number in version check
curl 7.11.0 through 7.12.2 when built from their official release
archives will present a 5 digit version number instead of the documented
6 digits which breaks the version check in the Makefile.
Correct these broken version numbers on the fly when extracting them to
ensure the comparison works correctly.
[jc: shortened the new sed scripts a bit]
Signed-off-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gettext N_ macro is used to mark strings for translation
without actually translating them. At runtime the string is
expected to be passed to the gettext API for translation.
If two N_ macro invocations appear next to each other with only
whitespace (or nothing at all) between them, the two separate
strings will be marked for translation, but the preprocessor
will then silently combine the strings into one and at runtime
the string passed to gettext will not match the strings that
were translated so no translation will actually occur.
Avoid this by adding parentheses around the expansion of the
N_ macro so that instead of ending up with two adjacent strings
that are then combined by the preprocessor, two adjacent strings
surrounded by parentheses result instead which causes a compile
error so the mistake can be quickly found and corrected.
However, since these string literals are typically assigned to
static variables and not all compilers support parenthesized
string literal assignments, allow this to be controlled by the
Makefile with the default only enabled when the compiler is
known to support the syntax.
For now only __GNUC__ enables this by default which covers both
gcc and clang which should result in early detection of any
adjacent N_ macros.
Although the necessary tests make the affected files a bit less
elegant, the benefit of avoiding propagation of a translation-
marking error to all the translation teams thus creating extra
work for them when the error is eventually detected and fixed
would seem to outweigh the minor inelegance the additional
configuration tests introduce.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenSSL version 0.9.6b and before defined the function HMAC_cleanup.
Newer versions define HMAC_CTX_cleanup. Check for HMAC_CTX_cleanup and
fall back to HMAC_cleanup when the newer function is missing.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set or clear Makefile variables HAVE_CLOCK_GETTIME and
HAVE_CLOCK_MONOTONIC based upon results of the checks (overriding
default values from config.mak.uname).
CLOCK_MONOTONIC isn't available on RHEL3, but there are still RHEL3
systems being used in production.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newer libCurl knows how to talk IMAP; "git imap-send" has been
updated to use this instead of a hand-rolled OpenSSL calls.
* br/imap-send-via-libcurl:
git-imap-send: use libcurl for implementation
Long overdue departure from the assumption that S_IFMT is shared by
everybody made in 2005.
* dm/compat-s-ifmt-for-zos:
compat: convert modes to use portable file type values
The build procedure did not bother fixing perl and python scripts
when NO_PERL and NO_PYTHON build-time configuration changed.
* jk/rebuild-perl-scripts-with-no-perl-seting-change:
Makefile: have python scripts depend on NO_PYTHON setting
Makefile: simplify by using SCRIPT_{PERL,SH}_GEN macros
Makefile: have perl scripts depend on NO_PERL setting
The build procedure did not bother fixing perl and python scripts
when NO_PERL and NO_PYTHON build-time configuration changed.
* jk/rebuild-perl-scripts-with-no-perl-seting-change:
Makefile: have python scripts depend on NO_PYTHON setting
Makefile: simplify by using SCRIPT_{PERL,SH}_GEN macros
Makefile: have perl scripts depend on NO_PERL setting
This adds simple wrapper functions around calls to stat(), fstat(),
and lstat() that translate the operating system's native file type
bits to those used by most operating systems. It also rewrites the
S_IF* macros to the common values, so all file type processing is
performed using the translated modes. This makes projects portable
across operating systems that use different file type definitions.
Only the file type bits may be affected by these compatibility
functions; the file permission bits are assumed to be 07777 and are
passed through unchanged.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the perl scripts, python scripts need a dependency to ensure they
are rebuilt when switching between the "dummy" versions that run
without Python and the real thing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SCRIPT_PERL_GEN is defined as $(patsubst %.perl,%,$(SCRIPT_PERL))
for use in targets like build-perl-script used by makefiles in
subdirectories that override SCRIPT_PERL (see v1.8.2-rc0~17^2,
"git-remote-mediawiki: use toplevel's Makefile", 2013-02-08).
The same expression is used in the rules that actually write the
generated perl scripts, and since these rules were introduced before
SCRIPT_PERL_GEN, they use the longhand instead of that macro. Use the
macro to make reading easier.
Likewise for SCRIPT_SH_GEN. The Python rules already got the same
simplification in v1.8.4-rc0~162^2~8 (2013-05-24).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If NO_PERL is not set, our perl scripts are built as
usual. If it is set, then we build "dummy" versions that
tell you git was built without perl support and exit
gracefully.
However, if you switch to NO_PERL in a directory with
existing build artifacts, we do not notice that the files
need rebuilt. We see only that they are newer than the
"unimplemented.sh" wrapper and assume they are done. So
doing:
make
make NO_PERL=Nope
would result in a git-add--interactive script that uses perl
(and running the test suite would make use of it).
Instead, we should trigger a rebuild of the perl scripts
anytime NO_PERL changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use libcurl's high-level API functions to implement git-imap-send
instead of the previous low-level OpenSSL-based functions.
Since version 7.30.0, libcurl's API has been able to communicate with
IMAP servers. Using those high-level functions instead of the current
ones would reduce imap-send.c by some 1200 lines of code. For now,
the old ones are wrapped in #ifdefs, and the new functions are enabled
by make if curl's version is >= 7.34.0, from which version on curl's
CURLOPT_LOGIN_OPTIONS (enabling IMAP authentication) parameter has been
available. The low-level functions will still be used for tunneling
into the server for now.
As I don't have access to that many IMAP servers, I haven't been able to
test the new code with a wide variety of parameter combinations. I did
test both secure and insecure (imaps:// and imap://) connections and
values of "PLAIN" and "LOGIN" for the authMethod.
In order to suppress a sparse warning about "using sizeof on a
function", we use the same solution used in commit 9371322a6
("sparse: suppress some "using sizeof on a function" warnings",
06-10-2013) which solved exactly this problem for the other commands
using libcurl.
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
z/OS port
* dm/port2zos:
compat/bswap.h: detect endianness from XL C compiler macros
Makefile: reorder linker flags in the git executable rule
git-compat-util.h: support variadic macros with the XL C compiler
The XL C compiler can fail due to mixing library path and object
file arguments, for example when linking git while building with
"gmake LDFLAGS=-L$prefix/lib".
Move the ALL_LDFLAGS variable expansion in the git executable rule
to be consistent with all the other linking rules, namely to have
LDFLAGS such as -L$where before the object files *.o being linked
together.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new filter to programatically edit the tail end of the commit log
messages.
* cc/interpret-trailers:
Documentation: add documentation for 'git interpret-trailers'
trailer: add tests for commands in config file
trailer: execute command from 'trailer.<name>.command'
trailer: add tests for "git interpret-trailers"
trailer: add interpret-trailers command
trailer: put all the processing together and print
trailer: parse trailers from file or stdin
trailer: process command line trailer arguments
trailer: read and process config information
trailer: process trailers from input message and arguments
trailer: add data structures and basic functions
This patch adds the "git interpret-trailers" command.
This command uses the previously added process_trailers()
function in trailer.c.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will use a doubly linked list to store all information
about trailers and their configuration.
This way we can easily remove or add trailers to or from
trailer lists while traversing the lists in either direction.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/crlf-tests:
MinGW: update tests to handle a native eol of crlf
Makefile: propagate NATIVE_CRLF to C
t0027: Tests for core.eol=native, eol=lf, eol=crlf
Admit that keeping LIB_H up-to-date, only for those that do not use
the automatically generated dependencies, is a losing battle, and
make it conservative by making everything depend on anything.
* jk/make-simplify-dependencies:
Makefile: drop CHECK_HEADER_DEPENDENCIES code
Makefile: use `find` to determine static header dependencies
i18n: treat "make pot" as an explicitly-invoked target
Add in-core caching layer to let us avoid reading the same
configuration files number of times.
* ta/config-set:
test-config: add tests for the config_set API
add `config_set` API for caching config-like files
Commit 95f31e9a (convert: The native line-ending is \r\n on MinGW,
2010-09-04) correctly points out that the NATIVE_CRLF setting is
incorrectly set on Mingw git. However, the Makefile variable is not
propagated to the C preprocessor and results in no change. This patch
pushes the definition to the C code and adds a test to validate that
when core.eol as native is crlf, we actually normalize text files to
this line ending convention when core.autocrlf is false.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code was useful when we kept a static list of header
files, and it was easy to forget to update it. Since the last
commit, we generate the list dynamically.
Technically this could still be used to find a dependency
that our dynamic check misses (e.g., a header file without a
".h" extension). But that is reasonably unlikely to be
added, and even less likely to be noticed by this tool
(because it has to be run manually)., It is not worth
carrying around the cruft in the Makefile.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most modern platforms will use automatically computed header
dependencies to figure out when a C file needs rebuilt due
to a header changing. With old compilers, however, we
fallback to a static list of header files. If any of them
changes, we recompile everything. This is overly
conservative, but the best we can do on older platforms.
It is unfortunately easy for our static header list to grow
stale, as none of the regular developers make use of it.
Instead of trying to keep it up to date, let's invoke "find"
to generate the list dynamically.
Since we do not use the value $(LIB_H) unless either
COMPUTE_HEADER_DEPENDENCIES is turned on or the user is
building "po/git.pot" (where it comes in via $(LOCALIZED_C),
make is smart enough to not even run this "find" in most
cases. However, we do need to stop using the "immediate"
variable assignment ":=" for $(LOCALIZED_C). That's OK,
because it was not otherwise useful here.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
po/git.pot is normally used as-is and not regenerated by people
building git, so it is okay if an explicit "make po/git.pot" always
automatically regenerates it. Depend on the magic FORCE target
instead of explicitly keeping track of dependencies.
This simplifies the makefile, in particular preparing for a moment
when $(LIB_H), which is part of $(LOCALIZED_C), can be computed on the
fly. It also fixes a slight breakage in which changes to perl and shell
scripts did not trigger a rebuild of po/git.pot.
We still need a dependency on GENERATED_H, to force those files to be
built when regenerating git.pot.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perf tests need a repository to operate on; if none is
defined, we fall back to the repository containing our build
directory. That fails, though, for an exported tarball of
git.git, which has no repository.
Since 5d7fd6d we run the perf tests as part of "make
profile". Therefore "make profile" fails out of the box on
released tarballs of v2.1.0.
We can fix this by making the perf tests optional; if they
are skipped, we still run the regular test suite, which
should give a lot of profile data (and is what we used to do
prior to 5d7fd6d anyway).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the `config_set` C API as a set of simple commands in order to
facilitate testing. Add tests for the `config_set` API as well as for
`git_config_get_*()` family for the usual config files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
* ak/profile-feedback-build:
Fix profile feedback with -jN and add profile-fast
Run the perf test suite for profile feedback too
Don't define away __attribute__ on gcc
Use BASIC_FLAGS for profile feedback
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
Add a getnanotime() function that returns nanoseconds since 01/01/1970 as
unsigned 64-bit integer (i.e. overflows in july 2554). This is easier to
work with than e.g. struct timeval or struct timespec. Basing the timer on
the epoch allows using the results with other time-related APIs.
To simplify adaption to different platforms, split the implementation into
a common getnanotime() and a platform-specific highres_nanos() function.
The common getnanotime() function handles errors, falling back to
gettimeofday() if highres_nanos() isn't implemented or doesn't work.
getnanotime() is also responsible for normalizing to the epoch. The offset
to the system clock is calculated only once on initialization, i.e.
manually setting the system clock has no impact on the timer (except if
the fallback gettimeofday() is in use). Git processes are typically short
lived, so we don't need to handle clock drift.
The highres_nanos() function returns monotonically increasing nanoseconds
relative to some arbitrary point in time (e.g. system boot), or 0 on
failure. Providing platform-specific implementations should be relatively
easy, e.g. adapting to clock_gettime() as defined by the POSIX realtime
extensions is seven lines of code.
This version includes highres_nanos() implementations for:
* Linux: using clock_gettime(CLOCK_MONOTONIC)
* Windows: using QueryPerformanceCounter()
Todo:
* enable clock_gettime() on more platforms
* add Mac OSX version, e.g. using mach_absolute_time + mach_timebase_info
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback always failed for me with -jN. The problem
was that there was no implicit ordering between the profile generate
stage and the profile use stage. So some objects in the later stage
would be linked with profile generate objects, and fail due
to the missing -lgcov.
This adds a new profile target that implicitely enforces the
correct ordering by using submakes. Plus a profile-install target
to also install. This is also nicer to type that PROFILE=...
Plus I always run the performance test suite now for the full
profile run.
In addition I also added a profile-fast / profile-fast-install
target the only runs the performance test suite instead of the
whole test suite. This significantly speeds up the profile build,
which was totally dominated by test suite run time. However
it may have less coverage of course.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use BASIC_CFLAGS instead of CFLAGS to set up the profile feedback
option in the Makefile.
This allows still overriding CFLAGS on the make command line
without disabling profile feedback.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to disable threaded "git index-pack" on platforms without
thread-safe pread(); use a different workaround for such
platforms to allow threaded "git index-pack".
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
Commit signatures can be verified using "git show -s --show-signature"
or the "%G?" pretty format and parsing the output, which is well suited
for user inspection, but not for scripting.
Provide a command "verify-commit" which is analogous to "verify-tag": It
returns 0 for good signatures and non-zero otherwise, has the gpg output
on stderr and (optionally) the commit object on stdout, sans the
signature, just like "verify-tag" does.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the logic to compute the display width needed for utf8
strings and allow us to more easily maintain the tables used in
that logic.
We may want to let the users choose if codepoints with ambiguous
widths are treated as a double or single width in a follow-up patch.
* tb/unicode-6.3-zero-width:
utf8: make it easier to auto-update git_wcwidth()
utf8.c: use a table for double_width
Enable threaded index-pack on platforms without thread-unsafe
pread() emulation.
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
Instead of running N pair-wise diff-trees when inspecting a
N-parent merge, find the set of paths that were touched by walking
N+1 trees in parallel. These set of paths can then be turned into
N pair-wise diff-tree results to be processed through rename
detections and such. And N=2 case nicely degenerates to the usual
2-way diff-tree, which is very nice.
* ks/tree-diff-nway:
mingw: activate alloca
combine-diff: speed it up, by using multiparent diff tree-walker directly
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well
Portable alloca for Git
tree-diff: reuse base str(buf) memory on sub-tree recursion
tree-diff: no need to call "full" diff_tree_sha1 from show_path()
tree-diff: rework diff_tree interface to be sha1 based
tree-diff: diff_tree() should now be static
tree-diff: remove special-case diff-emitting code for empty-tree cases
tree-diff: simplify tree_entry_pathcmp
tree-diff: show_path prototype is not needed anymore
tree-diff: rename compare_tree_entry -> tree_entry_pathcmp
tree-diff: move all action-taking code out of compare_tree_entry()
tree-diff: don't assume compare_tree_entry() returns -1,0,1
tree-diff: consolidate code for emitting diffs and recursion in one place
tree-diff: show_tree() is not needed
tree-diff: no need to pass match to skip_uninteresting()
tree-diff: no need to manually verify that there is no mode change for a path
combine-diff: move changed-paths scanning logic into its own function
combine-diff: move show_log_first logic/action out of paths scanning
The function git_wcwidth() returns for a given unicode code point the
width on the display:
-1 for control characters,
0 for combining or other non-visible code points
1 for e.g. ASCII
2 for double-width code points.
This table had been originally been extracted for one Unicode
version, probably 3.2.
We now use two tables these days, one for zero-width and another for
double-width. Make it easier to update these tables to a later
version of Unicode by factoring out the table from utf8.c into
unicode_width.h and add the script update_unicode.sh to update the
table based on the latest Unicode specification files.
Thanks to Peter Krefting <peter@softwolves.pp.se> and Kevin Bracey
<kevin@bracey.fi> for helping with their Unicode knowledge.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that some platforms do ship without curl-config even
though they build with the hardcoded default -lcurl and rely on it
to work.
* db/make-with-curl:
Makefile: default to -lcurl when no CURL_CONFIG or CURLDIR
The original implementation of CURL_CONFIG support did not match the
original behavior of using -lcurl when CURLDIR was not set. This broke
implementations that were lacking curl-config but did have libcurl
installed along system libraries, such as MSysGit. In other words, the
assumption that curl-config is always installed was incorrect.
Instead, if CURL_CONFIG is empty or returns an empty result (e.g. due
to curl-config being missing), use the old behavior of falling back to
-lcurl.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ask curl-config how to link with the curl library, instead of
having only a limited configurability knobs in the Makefile.
* db/make-with-curl:
Makefile: allow static linking against libcurl
Makefile: use curl-config to determine curl flags
When extract l10n messages, we use "--add-comments" option to keep
comments right above the l10n messages for references. But sometimes
irrelevant comments are also extracted. For example in the following
code block, the comment in line 2 will be extracted as comment for the
l10n message in line 3, but obviously it's wrong.
{ OPTION_CALLBACK, 0, "ignore-removal", &addremove_explicit,
NULL /* takes no arguments */,
N_("ignore paths removed in the working tree (same as
--no-all)"),
PARSE_OPT_NOARG, ignore_removal_cb },
Since almost all comments for l10n translators are marked with the same
prefix (tag): "TRANSLATORS:", it's safe to only extract comments with
this special tag. I.E. it's better to call xgettext as:
xgettext --add-comments=TRANSLATORS: ...
Also tweaks the multi-line comment in "init-db.c", to make it start with
the proper tag, not "* TRANSLATORS:" (which has a star before the tag).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multi-threaing of index-pack was disabled with c0f8654
(index-pack: Disable threading on cygwin - 2012-06-26), because
pread() implementations for Cygwin and MSYS were not thread
safe. Recent Cygwin does offer usable pread() and we enabled
multi-threading with 103d530f (Cygwin 1.7 has thread-safe pread,
2013-07-19).
Work around this problem on platforms with a thread-unsafe
pread() emulation by opening one file handle per thread; it
would prevent parallel pread() on different file handles from
stepping on each other.
Also remove NO_THREAD_SAFE_PREAD that was introduced in c0f8654
because it's no longer used anywhere.
This workaround is unconditional, even for platforms with
thread-safe pread() because the overhead is small (a couple file
handles more) and not worth fragmenting the code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires more flags than can be guessed with the old-style
CURLDIR and related options, so is only supported when curl-config is
present.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
curl-config should always be installed alongside a curl distribution,
and its purpose is to provide flags for building against libcurl, so
use it instead of guessing flags and dependent libraries.
Allow overriding CURL_CONFIG to a custom path to curl-config, to
compile against a curl installation other than the first in PATH.
Depending on the set of features curl is compiled with, there may be
more libraries required than the previous two options of -lssl and
-lidn. For example, with a vanilla build of libcurl-7.36.0 on Mac OS X
10.9:
$ ~/d/curl-out-7.36.0/lib/curl-config --libs
-L/Users/dborowitz/d/curl-out-7.36.0/lib -lcurl -lgssapi_krb5 -lresolv -lldap -lz
Use this only when CURLDIR is not explicitly specified, to continue
supporting older builds.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Most gmtime implementations return a NULL value when they
encounter an error (and this behavior is specified by ANSI C
and POSIX). FreeBSD's implementation, however, will simply
leave the "struct tm" untouched. Let's also recognize this
and convert it to a NULL (with this patch, t4212 should pass
on FreeBSD).
Reported-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we'll have to use alloca() for performance reasons,
but since alloca is non-standardized and is not portable, let's have a
trick with compatibility wrappers:
1. at configure time, determine, do we have working alloca() through
alloca.h, and define
#define HAVE_ALLOCA_H
if yes.
2. in code
#ifdef HAVE_ALLOCA_H
# include <alloca.h>
# define xalloca(size) (alloca(size))
# define xalloca_free(p) do {} while(0)
#else
# define xalloca(size) (xmalloc(size))
# define xalloca_free(p) (free(p))
#endif
and use it like
func() {
p = xalloca(size);
...
xalloca_free(p);
}
This way, for systems, where alloca is available, we'll have optimal
on-stack allocations with fast executions. On the other hand, on
systems, where alloca is not available, this gracefully fallbacks to
xmalloc/free.
Both autoconf and config.mak.uname configurations were updated. For
autoconf, we are not bothering considering cases, when no alloca.h is
available, but alloca() works some other way - its simply alloca.h is
available and works or not, everything else is deep legacy.
For config.mak.uname, I've tried to make my almost-sure guess for where
alloca() is available, but since I only have access to Linux it is the
only change I can be sure about myself, with relevant to other changed
systems people Cc'ed.
NOTE
SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations.
I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be
correct.
Cc: Brandon Casey <drafnel@gmail.com>
Cc: Marius Storm-Olsen <mstormo@gmail.com>
Cc: Johannes Sixt <j6t@kdbg.org>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Cc: Gerrit Pape <pape@smarden.org>
Cc: Petr Salinger <Petr.Salinger@seznam.cz>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes)
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tg/index-v4-format:
read-cache: add index.version config variable
test-lib: allow setting the index format version
introduce GIT_INDEX_VERSION environment variable
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
--sort=version:refname (or --sort=v:refname for short) sorts tags as
if they are versions. --sort=-refname reverses the order (with or
without ":version").
versioncmp() is copied from string/strverscmp.c in glibc commit
ee9247c38a8def24a59eb5cfb7196a98bef8cfdc, reformatted to Git coding
style. The implementation is under LGPL-2.1 and according to [1] I can
relicense it to GPLv2.
[1] http://www.gnu.org/licenses/gpl-faq.html#AllCompatibility
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
Allow adding a TEST_GIT_INDEX_VERSION variable to config.mak to set the
index version with which the test suite should be run.
If it isn't set, the default version given in the source code is
used (currently version 3).
To avoid breakages with index versions other than [23], also set the
index version under which t2104 is run to 3. This test only tests
functionality specific to version 2 and 3 of the index file and would
fail if the test suite is run with any other version.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.8.4 (about six months ago) wildmatch is used as default
replacement for fnmatch. We have seen only one fix since so wildmatch
probably has done a good job as fnmatch replacement. This concludes
the fnmatch->wildmatch transition by no longer relying on fnmatch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revision.o is included in libgit.a which is in $(GITLIBS), so we don't
need to include is separately. This fixes compilation with
"-fwhole-program" which otherwise fails with messages like this:
libgit.a(revision.o): In function `mark_tree_uninteresting':
/home/john/src/git/revision.c:108: multiple definition of `mark_tree_uninteresting'
/tmp/ccKQRkZV.ltrans2.ltrans.o:/home/john/src/git/revision.c:108: first defined here
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the git version number consists of less than three period
separated numbers, then the Windows resource file compilation
issues a syntax error:
$ touch git.rc
$ make V=1 git.res
GIT_VERSION = 1.9.rc0
windres -O coff \
-DMAJOR=1 -DMINOR=9 -DPATCH=rc0 \
-DGIT_VERSION="\\\"1.9.rc0\\\"" git.rc -o git.res
C:\msysgit\msysgit\mingw\bin\windres.exe: git.rc:2: syntax error
make: *** [git.res] Error 1
$
Note that -DPATCH=rc0.
The values passed via -DMAJOR=, -DMINOR=, and -DPATCH= are used in
FILEVERSION and PRODUCTVERSION statements, which expect up to four numeric
values. These version numbers are intended for machine consumption. They
are typically inspected by installers to decide whether a file to be
installed is newer than one that exists on the system, but are not used
for much else.
We can be pretty certain that there are no tools that look at these
version numbers, not even the installer of Git for Windows does.
Therefore, to fix the syntax error, fill in only the first two numbers,
which we are guaranteed to find in Git version numbers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bitmap index is a `.bitmap` file that can be found inside
`$GIT_DIR/objects/pack/`, next to its corresponding packfile, and
contains precalculated reachability information for selected commits.
The full specification of the format for these bitmap indexes can be found
in `Documentation/technical/bitmap-format.txt`.
For a given commit SHA1, if it happens to be available in the bitmap
index, its bitmap will represent every single object that is reachable
from the commit itself. The nth bit in the bitmap is the nth object in
the packfile; if it's set to 1, the object is reachable.
By using the bitmaps available in the index, this commit implements
several new functions:
- `prepare_bitmap_git`
- `prepare_bitmap_walk`
- `traverse_bitmap_commit_list`
- `reuse_partial_packfile_from_bitmap`
The `prepare_bitmap_walk` function tries to build a bitmap of all the
objects that can be reached from the commit roots of a given `rev_info`
struct by using the following algorithm:
- If all the interesting commits for a revision walk are available in
the index, the resulting reachability bitmap is the bitwise OR of all
the individual bitmaps.
- When the full set of WANTs is not available in the index, we perform a
partial revision walk using the commits that don't have bitmaps as
roots, and limiting the revision walk as soon as we reach a commit that
has a corresponding bitmap. The earlier OR'ed bitmap with all the
indexed commits can now be completed as this walk progresses, so the end
result is the full reachability list.
- For revision walks with a HAVEs set (a set of commits that are deemed
uninteresting), first we perform the same method as for the WANTs, but
using our HAVEs as roots, in order to obtain a full reachability bitmap
of all the uninteresting commits. This bitmap then can be used to:
a) limit the subsequent walk when building the WANTs bitmap
b) finding the final set of interesting commits by performing an
AND-NOT of the WANTs and the HAVEs.
If `prepare_bitmap_walk` runs successfully, the resulting bitmap is
stored and the equivalent of a `traverse_commit_list` call can be
performed by using `traverse_bitmap_commit_list`; the bitmap version
of this call yields the objects straight from the packfile index
(without having to look them up or parse them) and hence is several
orders of magnitude faster.
As an extra optimization, when `prepare_bitmap_walk` succeeds, the
`reuse_partial_packfile_from_bitmap` call can be attempted: it will find
the amount of objects at the beginning of the on-disk packfile that can
be reused as-is, and return an offset into the packfile. The source
packfile can then be loaded and the bytes up to `offset` can be written
directly to the result without having to consider the entires inside the
packfile individually.
If the `prepare_bitmap_walk` call fails (e.g. because no bitmap files
are available), the `rev_info` struct is left untouched, and can be used
to perform a manual rev-walk using `traverse_commit_list`.
Hence, this new set of functions are a generic API that allows to
perform the equivalent of
git rev-list --objects [roots...] [^uninteresting...]
for any set of commits, even if they don't have specific bitmaps
generated for them.
In further patches, we'll use this bitmap traversal optimization to
speed up the `pack-objects` and `rev-list` commands.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
EWAH is a word-aligned compressed variant of a bitset (i.e. a data
structure that acts as a 0-indexed boolean array for many entries).
It uses a 64-bit run-length encoding (RLE) compression scheme,
trading some compression for better processing speed.
The goal of this word-aligned implementation is not to achieve
the best compression, but rather to improve query processing time.
As it stands right now, this EWAH implementation will always be more
efficient storage-wise than its uncompressed alternative.
EWAH arrays will be used as the on-disk format to store reachability
bitmaps for all objects in a repository while keeping reasonable sizes,
in the same way that JGit does.
This EWAH implementation is a mostly straightforward port of the
original `javaewah` library that JGit currently uses. The library is
self-contained and has been embedded whole (4 files) inside the `ewah`
folder to ease redistribution.
The library is re-licensed under the GPLv2 with the permission of Daniel
Lemire, the original author. The source code for the C version can
be found on GitHub:
https://github.com/vmg/libewok
The original Java implementation can also be found on GitHub:
https://github.com/lemire/javaewah
[jc: stripped debug-only code per Peff's $gmane/239768]
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the built-in "git tar-tree" command (a thin wrapper around "git
archive") was removed in 925ceccf (tar-tree: remove deprecated
command, 2013-11-10), the build continued to install a non-functioning
git-tar-tree command in gitexecdir by mistake:
$ PATH=$(git --exec-path):$PATH
$ git-tar-tree -h
fatal: cannot handle tar-tree internally
The list of links in gitexecdir is populated from BUILTIN_OBJS, which
includes builtin/tar-tree.o to implement "git get-tar-commit-id".
Rename the get-tar-commit-id source file to builtin/get-tar-commit-id.c
to reflect its purpose and fix 'make install'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms ship Perl modules used by git scripts outside the
default perl path (e.g., on Mac OS X, Subversion's perl bindings live
in a separate xcode perl path). Add an PERLLIB_EXTRA variable to hold
a colon-separated list of extra directories to add to the perl path in
git's scripts, as a convenience for packagers.
Requested-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing hashtable implementation (in hash.[ch]) uses open addressing
(i.e. resolve hash collisions by distributing entries across the table).
Thus, removal is difficult to implement with less than O(n) complexity.
Resolving collisions of entries with identical hashes (e.g. via chaining)
is left to the client code.
Add a hashtable implementation that supports O(1) removal and is slightly
easier to use due to builtin entry chaining.
Supports all basic operations init, free, get, add, remove and iteration.
Also includes ready-to-use hash functions based on the public domain FNV-1
algorithm (http://www.isthe.com/chongo/tech/comp/fnv).
The per-entry data structure (hashmap_entry) is piggybacked in front of
the client's data structure to save memory. See test-hashmap.c for usage
examples.
The hashtable is resized by a factor of four when 80% full. With these
settings, average memory consumption is about 2/3 of hash.[ch], and
insertion is about twice as fast due to less frequent resizing.
Lookups are also slightly faster, because entries are strictly confined to
their bucket (i.e. no data of other buckets needs to be traversed).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been deprecated since commit 87194d2 (Deprecate peek-remote,
2007-11-24), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git lost-found" has been deprecated since commit fc8b5f0 (Deprecate
git-lost-found, 2007-11-08), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The release notes for Git 1.5.4 say that "git repo-config" will be
removed in the next feature release. Since Git 2.0 is nearly here,
remove it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hash table that stores the packing list for a given `pack-objects`
run was tightly coupled to the pack-objects code.
In this commit, we refactor the hash table and the underlying storage
array into a `packing_data` struct. The functionality for accessing and
adding entries to the packing list is hence accessible from other parts
of Git besides the `pack-objects` builtin.
This refactoring is a requirement for further patches in this series
that will require accessing the commit packing list from outside of
`pack-objects`.
The hash table implementation has been minimally altered: we now
use table sizes which are always a power of two, to ensure a uniform
index distribution in the array.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite "git repack" in C.
* sb/repack-in-c:
repack: improve warnings about failure of renaming and removing files
repack: retain the return value of pack-objects
repack: rewrite the shell script in C
Sparse issues an "using sizeof on a function" warning for each
call to curl_easy_setopt() which sets an option that takes a
function pointer parameter. (currently 12 such warnings over 4
files.)
The warnings relate to the use of the "typecheck-gcc.h" header
file which adds a layer of type-checking macros to the curl
function invocations (for gcc >= 4.3 and !__cplusplus). As part
of the type-checking layer, 'sizeof' is applied to the function
parameter of curl_easy_setopt(). Note that, in the context of
sizeof, the function to function pointer conversion is not
performed and that sizeof(f) != sizeof(&f).
A simple solution, therefore, would be to replace the function
name in each such call to curl_easy_setopt() with an explicit
function pointer expression (i.e. replace f with &f).
However, the "typecheck-gcc.h" header file is only conditionally
included, in addition to the gcc and C++ checks mentioned above,
depending on the CURL_DISABLE_TYPECHECK preprocessor variable.
In order to suppress the warnings, we use target-specific variable
assignments to add -DCURL_DISABLE_TYPECHECK to SPARSE_FLAGS for
each file affected (http-push.c, http.c, http-walker.c and
remote-curl.c).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
The motivation of this patch is to get closer to a goal of being
able to have a core subset of git functionality built in to git.
That would mean
* people on Windows could get a copy of at least the core parts
of Git without having to install a Unix-style shell
* people using git in on servers with chrooted environments
do not need to worry about standard tools lacking for shell
scripts.
This patch is meant to be mostly a literal translation of the
git-repack script; the intent is that later patches would start using
more library facilities, but this patch is meant to be as close to a
no-op as possible so it doesn't do that kind of thing.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove now disused remote-helpers framework for helpers written in
Python.
* jk/remove-remote-helpers-in-python:
git_remote_helpers: remove little used Python library
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
Allow section.<urlpattern>.var configuration variables to be
treated as a "virtual" section.var given a URL, and use the
mechanism to enhance http.* configuration variables.
This is a reroll of Kyle J. McKay's work.
* jc/url-match:
builtin/config.c: compilation fix
config: "git config --get-urlmatch" parses section.<url>.key
builtin/config: refactor collect_config()
config: parse http.<url>.<variable> using urlmatch
config: add generic callback wrapper to parse section.<url>.key
config: add helper to normalize and match URLs
http.c: fix parsing of http.sslCertPasswordProtected variable
When it was originally added, the git_remote_helpers library was used as
part of the tests of the remote-helper interface, but since commit
fc407f9 (Add new simplified git-remote-testgit, 2012-11-28) a simple
shell script is used for this.
A search on Ohloh [1] indicates that this library isn't used by any
external projects and even the Python remote helpers in contrib/ don't
use this library, so it is only used by its own test suite.
Since this is the only Python library in Git, removing it will make
packaging easier as the Python scripts only need to be installed for one
version of Python, whereas the library should be installed for all
available versions.
[1] http://code.ohloh.net/search?s=%22git_remote_helpers%22
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/darwin:
OS X: Fix redeclaration of die warning
Makefile: Fix APPLE_COMMON_CRYPTO with BLK_SHA1
imap-send: use Apple's Security framework for base64 encoding
This reverts commit 6c642a8786.
The previous commit introduced a size limit on IO chunks on all
platforms. The compat clipped_write() is not needed anymore.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the urlmatch_config_entry() to wrap the underlying
http_options() two-level variable parser in order to set
http.<variable> to the value with the most specific URL in the
configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be that APPLE_COMMON_CRYPTO did nothing when BLK_SHA1 was
set. But APPLE_COMMON_CRYPTO is now used for more than just SHA1 (see
3ef2bca) so make sure that the appropriate libraries are always set.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
Use Apple's supported functions for base64 encoding instead
of the deprecated OpenSSL functions.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new command to allow scripts to query the mailmap information.
* es/check-mailmap:
t4203: test check-mailmap command invocation
builtin: add git-check-mailmap command
Commit adbc0b6b ("cygwin: Use native Win32 API for stat", 30-09-2008)
added a Win32 specific implementation of the stat functions. In order
to handle absolute paths, cygwin mount points and symbolic links, this
implementation may fall back on the standard cygwin l/stat() functions.
Also, the choice of cygwin or Win32 functions is made lazily (by the
first call(s) to l/stat) based on the state of some config variables.
Unfortunately, this "schizophrenic stat" implementation has been the
source of many problems ever since. For example, see commits 7faee6b8,
79748439, 452993c2, 085479e7, b8a97333, 924aaf3e, 05bab3ea and 0117c2f0.
In order to avoid further problems, such as the issue raised by the new
reference handling API, remove the Win32 l/stat() implementation.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce command check-mailmap, similar to check-attr and check-ignore,
which allows direct testing of .mailmap configuration.
As plumbing accessible to scripts and other porcelain, check-mailmap
publishes the stable, well-tested .mailmap functionality employed by
built-in Git commands. Consequently, script authors need not
re-implement .mailmap functionality manually, thus avoiding potential
quirks and behavioral differences.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script was added in 36e5e70 (Start deprecating "git-command" in
favor of "git command", 2007-06-30) with the intent of aiding the
transition away from dashed forms.
It has already been used to help the transision and served its
purpose, and is no longer very useful for follow-up work, because
the majority of remaining matches it finds are false positives.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
Mac OS X does not like to write(2) more than INT_MAX number of
bytes; work it around by chopping write(2) into smaller pieces.
* fc/macos-x-clipped-write:
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Make it possible to call into copy-notes API from the sequencer code.
* jh/libify-note-handling:
Move create_notes_commit() from notes-merge.c into notes-utils.c
Move copy_note_for_rewrite + friends from builtin/notes.c to notes-utils.c
finish_copy_notes_for_rewrite(): Let caller provide commit message
Makefile simplification.
* fc/makefile:
Makefile: use $^ to avoid listing prerequisites on the command line
build: do not install git-remote-testgit
build: generate and clean test scripts
This is a pure code movement of the machinery for copying notes to
rewritten objects. This code was located in builtin/notes.c for
historical reasons. In order to make it available to builtin/commit.c
it was declared in builtin.h. This was more of an accident of history
than a concious design, and we now want to make this machinery more
widely available.
Hence, this patch moves the code into the new notes-utils.[hc] files
which are included into libgit.a. Except for adjusting #includes
accordingly, this patch merely moves the relevant functions verbatim
into the new files.
Cc: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally we used a singly linked list of commits to hold a set
of in-flight commits while traversing history. The most typical use
of the list is to add commits that are newly discovered to it, keep
the list sorted by commit timestamp, pick up the newest one from the
list, and keep digging. The cost of keeping the singly linked list
sorted is nontrivial, and this typical use pattern better matches a
priority queue.
Introduce a prio-queue structure, that can be used either as a LIFO
stack, or a priority queue. This will be used in the next patch to
hold in-flight commits during sort-in-topological-order.
Tests and the idea to make it usable for any "void *" pointers to
"things" are by Jeff King. Bugs are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update build for Cygwin 1.[57]. Torsten Bögershausen reports that
this is fine with Cygwin 1.7 ($gmane/225824) so let's try moving it
ahead.
* rj/mingw-cygwin:
cygwin: Remove the CYGWIN_V15_WIN32API build variable
mingw: rename WIN32 cpp macro to GIT_WINDOWS_NATIVE
Add the helper test-read-cache, which can be used to call read_cache and
discard_cache in a loop as well as a performance check based on it.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to list again the prerequisites.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 416fda6 (build: do not install git-remote-testpy) made it so
git-remote-testpy is not only not installed, but also not generated
by default. From a fresh checkout, "make --test=5800 test" would
have failed.
This was not found primarily because "make clean" failed to remove
git-remote-testpy, which is another bug in the same commit.
Fix the former by having 'all' target depend on $(NO_INSTALL) and
the latter by removing $(NO_INSTALL) in the 'clean' target.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/transport-helper-error-reporting-fix:
git-remote-testgit: build it to run under $SHELL_PATH
git-remote-testgit: further remove some bashisms
git-remote-testgit: avoid process substitution
t5801: "VAR=VAL shell_func args" is forbidden
transport-helper: update remote helper namespace
transport-helper: trivial code shuffle
transport-helper: warn when refspec is not used
transport-helper: clarify pushing without refspecs
transport-helper: update refspec documentation
transport-helper: clarify *:* refspec
transport-helper: improve push messages
transport-helper: mention helper name when it dies
transport-helper: report errors properly
Conflicts:
t/t5801-remote-helpers.sh
This set of patches collects a number of build fixes that have been
used on the msysgit port for a while and merging upstream should
simplify future maintenance.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQCVAwUAUbEmnGB90JXwhOSJAQKRJgP/TdWucLnedP4tRKhRrwy3AnZ2Her4Mn5n
isrNQu3eixT3PsGzdyYUvTYLP8OPNfgYYVEzqyrRtNHKKSD2qLGXt8oyOw63z10n
tiDcHHCfI1U/W7GHK1Q9abaQz/PF6yWnYenRt9lnckyqtxNoa8o+eOCfuY9lBfNJ
ccTP/dRgoL0=
=uWg2
-----END PGP SIGNATURE-----
Merge tag 'post183-for-junio' of http://github.com/msysgit/git
Collected msysgit build patches for upstream
This set of patches collects a number of build fixes that have been
used on the msysgit port for a while and merging upstream should
simplify future maintenance.
* tag 'post183-for-junio' of http://github.com/msysgit/git:
Set the default help format to html for msys builds.
Ensure the resource file is rebuilt when the version changes.
Windows resource: handle dashes in the Git version gracefully
Provide a Windows version resource for the git executables.
msysgit: Add the --large-address-aware linker directive to the makefile.
Define NO_GETTEXT for Git for Windows
Makefile: Do not use OLD_ICONV on MINGW anymore
Update Makefile to use handy automatic variables where appropriate,
and stop installing a script that is only used for testing.
* fc/makefile:
build: do not install git-remote-testpy
build: add NO_INSTALL variable
build: cleanup using $<
build: cleanup using $^
build: trivial simplification
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Embeds the git version and description into the git executable thus
implementing the request in issue #5.
Acked-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
Update the test coverage support that was left to bitrot for some
time.
* tr/coverage:
coverage: build coverage-untested-functions by default
coverage: set DEFAULT_TEST_TARGET to avoid using prove
coverage: do not delete .gcno files before building
coverage: split build target into compile and test
Newer MacOS X encourages the programs to compile and link with
their CommonCrypto, not with OpenSSL.
* da/darwin:
imap-send: eliminate HMAC deprecation warnings on Mac OS X
cache.h: eliminate SHA-1 deprecation warnings on Mac OS X
Makefile: add support for Apple CommonCrypto facility
Makefile: fix default regex settings on Darwin
