"git clone --shared" to borrow from a (secondary) worktree did not
work, even though "git clone --local" did. Both are now accepted.
* es/clone-shared-worktree:
clone: support 'clone --shared' from a worktree
"git worktree add" learned to run the post-checkout hook, just like
"git checkout" does, after the initial checkout.
* es/worktree-checkout-hook:
worktree: invoke post-checkout hook (unless --no-checkout)
When worktree functionality was originally implemented, the possibility
of 'clone --local' from within a worktree was overlooked, with the
result that the location of the "objects" directory of the source
repository was computed incorrectly, thus the objects could not be
copied or hard-linked by the clone. This shortcoming was addressed by
744e469755 (clone: allow --local from a linked checkout, 2015-09-28).
However, the related case of 'clone --shared' (despite being handled
only a few lines away from the 'clone --local' case) was not fixed by
744e469755, with a similar result of the "objects" directory location
being incorrectly computed for insertion into the 'alternates' file.
Fix this.
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add <path> <branch>', errors out when 'branch'
is not a local branch. It has no additional dwim'ing features that one
might expect.
Make it behave more like 'git checkout <branch>' when the branch doesn't
exist locally, but a remote tracking branch uniquely matches the desired
branch name, i.e. create a new branch from the remote tracking branch
and set the upstream to the remote tracking branch.
As 'git worktree add' currently just dies in this situation, there are
no backwards compatibility worries when introducing this feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add' sets up tracking branches if '<branch>' is
a remote tracking branch, and doesn't set them up otherwise, as is the
default for 'git branch'.
This may or may not be what the user wants. Allow overriding this
behaviour with a --[no-]track flag that gets passed through to 'git
branch'.
We already respect branch.autoSetupMerge, as 'git worktree' just calls
'git branch' internally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As explained in the document. This option has an advantage over the
command sequence "git worktree add && git worktree lock": there will be
no gap that somebody can accidentally "prune" the new worktree (or soon,
explicitly "worktree remove" it).
"worktree add" does keep a lock on while it's preparing the worktree.
If --lock is specified, this lock remains after the worktree is created.
Suggested-by: David Taylor <David.Taylor@dell.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bare repositories, get_worktrees() still returns the main repository,
so git worktree list can show it. ignore it in find_shared_symref so we
can still check out the main branch.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since `git worktree add` uses `git checkout` when `[<branch>]` is used,
and `git checkout -` is already supported, it makes sense to allow the
same shortcut in `git worktree add`.
Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch name in that case could be saved in rebase's head_name or
bisect's BISECT_START files. Ideally we should try to update them as
well. But it's trickier (*). Let's play safe and see if the user
complains about inconveniences before doing that.
(*) If we do it, bisect and rebase need to provide an API to rename
branches. We can't do it in worktree.c or builtin/branch.c because
when other people change rebase/bisect code, they may not be aware of
this code and accidentally break it (e.g. rename the branch file, or
refer to the branch in new files). It's a lot more work.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the rebase case, we want to detect if "HEAD" in some worktree
is being bisected because
1) we do not want to checkout this branch in another worktree, after
bisect is done it will want to go back to this branch
2) we do not want to delete the branch is either or git bisect will
fail to return to the (long gone) branch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function find_shared_symref() is used in a couple places:
1) in builtin/branch.c: it's used to detect if a branch is checked out
elsewhere and refuse to delete the branch.
2) in builtin/notes.c: it's used to detect if a note is being merged in
another worktree
3) in branch.c, the function die_if_checked_out() is actually used by
"git checkout" and "git worktree add" to see if a branch is already
checked out elsewhere and refuse the operation.
In cases 1 and 3, if a rebase is ongoing, "HEAD" will be in detached
mode, find_shared_symref() fails to detect it and declares "no branch is
checked out here", which is not really what we want.
This patch tightens the test. If the given symref is "HEAD", we try to
detect if rebase is ongoing. If so return the branch being rebased. This
makes checkout and branch delete operations safer because you can't
checkout a branch being rebased in another place, or delete it.
Special case for checkout. If the current branch is being rebased,
git-rebase.sh may use "git checkout" to abort and return back to the
original branch. The updated test in find_shared_symref() will prevent
that and "git rebase --abort" will fail as a result.
find_shared_symref() and die_if_checked_out() have to learn a new
option ignore_current_worktree to loosen the test a bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By adding this option which defaults to true, we can use the
corresponding --no-checkout to make some customizations before
the checkout, like sparse checkout, etc.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --force is not given but -B is, we should not proceed if the given
branch is already checked out elsewhere. add_worktree() has this test,
but it kicks in too late when "git branch --force" is already
executed. As a result, even though we correctly refuse to create a new
worktree, we have already updated the branch and mess up the other
checkout.
Repeat the die_if_checked_out() test again for this specific case before
"git branch" runs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current code does not update "symref" when -B is used. This string
contains the new HEAD. Because it's empty "git worktree add -B" fails at
symbolic-ref step.
Because branch creation is already done before calling add_worktree(),
-B is equivalent to -b from add_worktree() point of view. We do not need
the special case for -B.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix oversight where branch auto-vivication incorrectly kicks in when
--detach is specified and <branch> omitted. Instead, treat:
git worktree add --detach <path>
as shorthand for:
git worktree add --detach <path> HEAD
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Be consistent with git-checkout which disallows this (not particularly
meaningful) combination.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkout() only understands symref-style HEAD (i.e. "ref:
refs/heads/master"), however, HEAD may also be a an actual symbolic link
(on platforms which support it). To accurately detect if a branch is
checked out elsewhere, it needs to handle symbolic link HEAD, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, when <branch> is omitted from "git worktree <path>
<branch>" and neither -b nor -B is used, automatically create a new
branch named after <path>, as if "-b $(basename <path>)" was specified.
Thus, "git worktree add ../hotfix" creates a new branch named "hotfix"
and associates it with new worktree "../hotfix".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, like "git branch" and "git checkout -b", make
"git worktree add -b <newbranch> <path> <branch>" default to HEAD when
<branch> is omitted.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of "git worktree add", "git checkout --to" is
slated for removal. Therefore, retrofit linked worktree creation tests
to use "git worktree add" instead.
(The test to check exclusivity of "checkout --to" and "checkout <paths>"
is dropped altogether since it becomes meaningless with retirement of
"checkout --to".)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
