"git show -s" was less discoverable than it should be.
* mm/diff-no-patch-synonym-to-s:
Documentation/git-log.txt: capitalize section names
Documentation: move description of -s, --no-patch to diff-options.txt
Documentation/git-show.txt: include common diff options, like git-log.txt
diff: allow --patch & cie to override -s/--no-patch
diff: allow --no-patch as synonym for -s
t4000-diff-format.sh: modernize style
This was inherited from "show-diff -q" that was invented to tell
comparison between the index and the working tree to ignore only
removals in 2005.
These days, it is spelled as "--diff-filter=d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reimplements the ancient "-q" option to "git diff-files" that
was inherited from "show-diff -q" in terms of "--diff-filter=d". We
will be deprecating the "-q" option, so let's issue a warning when
we do so.
Incidentally this also tentatively fixes "git diff --no-index" to
honor "-q" and hide deletions; the use will get the same warning.
We should remove the support for "-q" in a future version but it is
not that urgent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All options that trigger a patch output now override --no-patch.
The case of --binary deserves extra attention: the name may suggest that
it turns a normal patch into a binary patch, but it actually already
enables patch output when normally disabled (e.g. "git log --binary"
displays a patch), hence it makes sense for "git show --no-patch
--binary" to display the binary patch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows the usual convention of having a --no-foo option to negate
--foo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to express "we do not care about deletions", we had to say
"--diff-filter=ACMRTXUB", giving all the possible change class
except for the one we do not want, "D".
This is cumbersome. As all the change classes are in uppercase,
allow their lowercase counterpart to selectively exclude the class
from the output. When such a negated change class is in the input,
start the filter option with the full bits set.
This would allow us to express the old "show-diff -q" with
"git diff-files --diff-filter=d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to accept "git diff --diff-filter=Q" (note that there is no
such change class 'Q') silently and showed no output (because there
is no such change class 'Q').
Error out when such an input is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of running strchr() on the list of status characters over
and over again, parse the --diff-filter option into bitfields and
use the bits to see if the change to the filepair matches the status
requested.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore_apply_filter() checks if a filepair matches the filter
given with the "--diff-filter" option for each input filepairs with
a fairly complex expression in two places.
Create a helper function and call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --diff-filter=<arg> option given by the user is kept as a
string, and passed to the underlying diffcore_apply_filter()
function as a string for each resulting path we run number of
strchr() to see if each class of change among ACDMRTXUB is meant to
be given.
Change the function signature to pass the whole diff_options, so
that we can pre-parse this string in the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" refused to even show difference when core.safecrlf is
set to true (i.e. error out) and there are offending lines in the
working tree files.
* jc/maint-diff-core-safecrlf:
diff: demote core.safecrlf=true to core.safecrlf=warn
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user will not be able to start to guess where in the
contents in the working tree the offending unsafe CR lies.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of the patch is to introduce the GNU diff
-B/--ignore-blank-lines as closely as possible. The short option is not
available because it's already used for "break-rewrites".
When this option is used, git-diff will not create hunks that simply
add or remove empty lines, but will still show empty lines
addition/suppression if they are close enough to "valuable" changes.
There are two differences between this option and GNU diff -B option:
- GNU diff doesn't have "--inter-hunk-context", so this must be handled
- The following sequence looks like a bug (context is displayed twice):
$ seq 5 >file1
$ cat <<EOF >file2
change
1
2
3
4
5
change
EOF
$ diff -u -B file1 file2
--- file1 2013-06-08 22:13:04.471517834 +0200
+++ file2 2013-06-08 22:13:23.275517855 +0200
@@ -1,5 +1,7 @@
+change
1
2
+
3
4
5
@@ -3,3 +5,4 @@
3
4
5
+change
So here is a more thorough description of the option:
- real changes are interesting
- blank lines that are close enough (less than context size) to
interesting changes are considered interesting (recursive definition)
- "context" lines are used around each hunk of interesting changes
- If two hunks are separated by less than "inter-hunk-context", they
will be merged into one.
The implementation does the "interesting changes selection" in a single
pass.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff_opt infrastructure sets flags based on defaults and command
line options. It is impossible to tell whether a flag has been set
as a default or on explicit request. Update the structure so that
this detection is possible:
* Add an extra "opt->touched_flags" that keeps track of all the
fields that have been touched by DIFF_OPT_SET and DIFF_OPT_CLR.
* You may continue setting the default values to the flags, like
commands in the "log" family do in cmd_log_init_defaults(), but
after you finished setting the defaults, you clear the
touched_flags field;
* And then you let the usual callchain call diff_opt_parse(),
allowing the opt->flags be set or unset, while keeping track of
which bits the user touched;
* There is an optional callback "opt->set_default" that is called
at the very beginning to let you inspect touched_flags and update
opt->flags appropriately, before the remainder of the diffcore
machinery is set up, taking the opt->flags value into account.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --diff-algorithm=algo" was understood by the command line
parser, but "git diff --diff-algorithm algo" was not.
* jk/diff-algo-finishing-touches:
diff: allow unstuck arguments with --diff-algorithm
git-merge(1): document diff-algorithm option to merge-recursive
"git diff --diff-algorithm algo" is also understood as "git diff
--diff-algorithm=algo".
* jk/diff-algo-finishing-touches:
diff: allow unstuck arguments with --diff-algorithm
git-merge(1): document diff-algorithm option to merge-recursive
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git log -p --submodule=log", the submodule log is not
indented by the graph output, although all other lines are. Fix this by
prepending the current line prefix to each line of the submodule log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argument to --diff-algorithm is mandatory, so there is no reason to
require the argument to be stuck to the option with '='. Change this
for consistency with other Git commands.
Note that this does not change the handling of diff-algorithm in
merge-recursive.c since the primary interface to that is via the -X
option to 'git merge' where the unstuck form does not make sense.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
The logic used by "git diff -M --stat" to shorten the names of
files before and after a rename did not work correctly when the
common prefix and suffix between the two filenames overlapped.
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
In the warning message printed when rename or unmodified copy
detection was skipped due to too many files, change "diff.renamelimit"
to "diff.renameLimit", in order to make it consistent with git
documentation, which consistently uses "diff.renameLimit".
Signed-off-by: Max Nanasy <max.nanasy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic described in d020e27 (diff: Fix rename pretty-print when
suffix and prefix overlap, 2013-02-23) is wrong: The proof in the
comment is valid only if both strings are the same length. *One* of
old/new can reach a-1 (b-1, resp.) if 'a' is a suffix of 'b' (or vice
versa).
Since the intent was to let the loop run down to the '/' at the end of
the common prefix, fix it by making that distinction explicit: if
there is no prefix, allow no underrun.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When considering a rename for two files that have a suffix and a prefix
that can overlap, a confusing line is shown. As an example, renaming
"a/b/b/c" to "a/b/c" shows "a/b/{ => }/b/c".
Currently, what we do is calculate the common prefix ("a/b/"), and the
common suffix ("/b/c"), but the same "/b/" is actually counted both in
prefix and suffix. Then when calculating the size of the non-common part,
we end-up with a negative value which is reset to 0, thus the "{ => }".
Do not allow the common suffix to overlap the common prefix and stop
when reaching a "/" that would be in both.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
Refactors a lot of repetitive code sequence from the graph drawing
code and adds it to the combined diff output.
* jk/diff-graph-cleanup:
combine-diff.c: teach combined diffs about line prefix
diff.c: use diff_line_prefix() where applicable
diff: add diff_line_prefix function
diff.c: make constant string arguments const
diff: write prefix to the correct file
graph: output padding for merge subsequent parents
This is a helper function to call the diff output_prefix function and
return its value as a C string, allowing us to greatly simplify
everywhere that needs to get the output prefix.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write the prefix for an output line to the same file as the actual
content.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since command line options have higher priority than config file
variables and taking previous commit into account, we need a way
how to specify myers algorithm on command line. However,
inventing `--myers` is not the right answer. We need far more
general option, and that is `--diff-algorithm`.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users or projects prefer different algorithms over others, e.g.
patience over myers or similar. However, specifying appropriate
argument every time diff is to be used is impractical. Moreover,
creating an alias doesn't play nicely with other tools based on diff
(git-show for instance). Hence, a configuration variable which is able
to set specific algorithm is needed. For now, these four values are
accepted: 'myers' (which has the same effect as not setting the config
variable at all), 'minimal', 'patience' and 'histogram'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
Even though we show a separate *UNMERGED* entry in the patch and
diffstat output (or in the --raw format, for that matter) in
addition to and separately from the diff against the specified stage
(defaulting to #2) for unmerged paths, they should not be counted in
the total number of files affected---that would lead to counting the
same path twice.
The separation done by the previous step makes this fix simple and
straightforward. Among the filepairs in diff_queue, paths that
weren't modified, and the extra "unmerged" entries do not count as
total number of files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffstat generation logic, with --stat-count limit, is
implemented as three loops.
- The first counts the width necessary to show stats up to
specified number of entries, and notes up to how many entries in
the data we need to iterate to show the graph;
- The second iterates that many times to draw the graph, adjusts
the number of "total modified files", and counts the total
added/deleted lines for the part that was shown in the graph;
- The third iterates over the remainder and only does the part to
count "total added/deleted lines" and to adjust "total modified
files" without drawing anything.
Move the logic to count added/deleted lines and modified files from
the second loop to the third loop.
This incidentally fixes a bug. The third loop was not filtering
binary changes (counted in bytes) from the total added/deleted as it
should. The second loop implemented this correctly, so if a binary
change appeared earlier than the --stat-count cutoff, the code
counted number of added/deleted lines correctly, but if it appeared
beyond the cutoff, the number of lines would have mixed with the
byte count in the buggy third loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git diff --submodule=log" to set to be the default via
configuration.
* rr/submodule-diff-config:
submodule: display summary header in bold
diff: rename "set" variable
diff: introduce diff.submodule configuration variable
Documentation: move diff.wordRegex from config.txt to diff-config.txt
We failed to mention a file without any content change but whose
permission bit was modified, or (worse yet) a new file without any
content in the "git diff --stat" output.
* lt/diff-stat-show-0-lines:
Fix "git diff --stat" for interesting - but empty - file changes
Currently, 'git diff --submodule' displays output with a bold diff
header for non-submodules. So this part is in bold:
diff --git a/file1 b/file1
index 30b2f6c..2638038 100644
--- a/file1
+++ b/file1
For submodules, the header looks like this:
Submodule submodule1 012b072..248d0fd:
Unfortunately, it's easy to miss in the output because it's not bold.
Change this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time the builtin_diff function used one color, and the color
variables were called "set" and "reset". Nowadays it is a much longer
function and we use several colors (e.g., "add", "del"). Rename "set" to
"meta" to show that it is the color for showing diff meta-info (it still
does not indicate that it is a "color", but at least it matches the
scheme of the other color variables).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a diff.submodule configuration variable corresponding to the
'--submodule' command-line option of 'git diff'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanups so that libgit.a does not depend on anything in the
builtin/ directory.
* nd/builtin-to-libgit:
fetch-pack: move core code to libgit.a
fetch-pack: remove global (static) configuration variable "args"
send-pack: move core code to libgit.a
Move setup_diff_pager to libgit.a
Move print_commit_list to libgit.a
Move estimate_bisect_steps to libgit.a
Move try_merge_command and checkout_fast_forward to libgit.a
This is used by diff-no-index.c, part of libgit.a while it stays in
builtin/diff.c. Move it to diff.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
While at it, move check_pager from git.c to pager.c. It makes more
sense there and pager.c is also part of libgit.a
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Use string_list_split_in_place() to split the comma-separated
parameters string. This simplifies the code and also fixes a bug: the
old code made calls like
memcmp(p, "lines", p_len)
which needn't work if p_len is different than the length of the
constant string (and could illegally access memory if p_len is larger
than the length of the constant string).
When p_len was less than the length of the constant string, the old
code would have allowed some abbreviations to be accepted (e.g., "cha"
for "changes") but this seems to have been a bug rather than a
feature, because (1) it is not documented; (2) no attempt was made to
handle ambiguous abbreviations, like "c" for "changes" vs
"cumulative".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
The behavior of "git diff --stat" is rather odd for files that have
zero lines of changes: it will discount them entirely unless they were
renames.
Which means that the stat output will simply not show files that only
had "other" changes: they were created or deleted, or their mode was
changed.
Now, those changes do show up in the summary, but so do renames, so
the diffstat logic is inconsistent. Why does it show renames with zero
lines changed, but not mode changes or added files with zero lines
changed?
So change the logic to not check for "is_renamed", but for
"is_interesting" instead, where "interesting" is judged to be any
action but a pure data change (because a pure data change with zero
data changed really isn't worth showing, if we ever get one in our
diffpairs).
So if you did
chmod +x Makefile
git diff --stat
before, it would show empty (" 0 files changed"), with this it shows
Makefile | 0
1 file changed, 0 insertions(+), 0 deletions(-)
which I think is a more correct diffstat (and then with "--summary" it
shows *what* the metadata change to Makefile was - this is completely
consistent with our handling of renamed files).
Side note: the old behavior was *really* odd. With no changes at all,
"git diff --stat" output was empty. With just a chmod, it said "0
files changed". No way is our legacy behavior sane.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a configuration variable diff.context that tells
Porcelain commands to use a non-default number of context
lines instead of 3 (the default). With this variable, users
do not have to keep repeating "git log -U8" from the command
line; instead, it becomes sufficient to say "git config
diff.context 8" just once.
Signed-off-by: Jeff Muizelaar <jmuizelaar@mozilla.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once you do
$ alias glogone git log --follow
there is no way to say
$ glogone --no-follow ...
Not that "log --follow" is all that useful, but it is cheap to
support the common "you can defeat an undesirable option with a
'no-' variant of it later on the command line" pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turn many file-scope private symbols to static to reduce the
global namespace contamination.
* jc/make-static:
sequencer.c: mark a private file-scope symbol as static
ident.c: mark private file-scope symbols as static
trace.c: mark a private file-scope symbol as static
wt-status.c: mark a private file-scope symbol as static
read-cache.c: mark a private file-scope symbol as static
strbuf.c: mark a private file-scope symbol as static
sha1-array.c: mark a private file-scope symbol as static
symlinks.c: mark private file-scope symbols as static
notes.c: mark a private file-scope symbol as static
rerere.c: mark private file-scope symbols as static
graph.c: mark private file-scope symbols as static
diff.c: mark a private file-scope symbol as static
commit.c: mark a file-scope private symbol as static
builtin/notes.c: mark file-scope private symbols as static
Earlier we made the diffstat summary line that shows the number of
lines added/deleted localizable, but it was found irritating having
to see them in various languages on a list whose discussion language
is English.
The original had trivial thinko in reverting Q_(), which has been
fixed.
* nd/maint-diffstat-summary:
Revert diffstat back to English
This reverts the i18n part of 7f81463 (Use correct grammar in diffstat
summary line - 2012-02-01) but still keeps the grammar correctness for
English. It also reverts b354f11 (Fix tests under GETTEXT_POISON on
diffstat - 2012-08-27). The result is diffstat always in English
for all commands.
This helps stop users from accidentally sending localized
format-patch'd patches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
The output from "git diff -B" for a file that ends with an
incomplete line did not put "\ No newline..." on a line of its own.
* ab/diff-write-incomplete-line:
Fix '\ No newline...' annotation in rewrite diffs
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
When a file that ends with an incomplete line is expressed as a
complete rewrite with the -B option, git diff incorrectly
appends the incomplete line indicator "\ No newline at end of
file" after such a line, rather than writing it on a line of its
own (the output codepath for normal output without -B does not
have this problem). Add a LF after the incomplete line before
writing the "\ No newline ..." out to fix this.
Add a couple of tests to confirm that the indicator comment is
generated on its own line in both plain diff and rewrite mode.
Signed-off-by: Adam Butcher <dev.lists@jessamine.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GETTEXT_POISON scrapes everything in translated strings, including \n.
t4205.12 however needs this \n in matching the end result. Keep this
\n out of translation to make t4205.12 happy.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
"git diff", "git status" and anything that internally uses the
comparison machinery was utterly broken when the difference
involved a file with "-" as its name. This was due to the way "git
diff --no-index" was incorrectly bolted on to the system, making
any comparison that involves a file "-" at the root level
incorrectly read from the standard input.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
Upon seeing a type-change filepair, "diff --no-ext-diff" does not
show the usual "deletion followed by addition" split patch and does
not run the external diff driver either.
This is because the logic to disable external diff was placed at a
wrong level in the callchain. run_diff_cmd() decides to show the
split patch only when external diff driver is not configured or
specified via GIT_EXTERNAL_DIFF environment, but this is done before
checking if --no-ext-diff was given. To make things worse,
run_diff_cmd() checks --no-ext-diff and disables the output for such
a filepair completely, as the callchain below it (e.g. builtin_diff)
does not want to handle typechange filepairs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the way "git diff --no-index" is bolted onto by touching the
low level code that is shared with the rest of the "git diff" code,
even though it has to work in a very different way, any comparison
that involves a file "-" at the root level incorrectly tried to read
from the standard input. This cleans up the no-index codepath
further to remove code that reads from the standard input from the
core side, which is never necessary when git is running its usual
diff operation.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not mix byte and line counts. Binary files have byte counts;
skip them when accumulating line insertions/deletions.
The regression was introduced in e18872b.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" used to fully count a binary file with modified
execution bits whose contents is unmodified, which was not right.
By Zbigniew Jędrzejewski-Szmek (4) and Johannes Sixt (1)
* zj/diff-empty-chmod:
t4006: Windows do not have /dev/zero
diff --stat: do not run diff on indentical files
diff --stat: report mode-only changes for binary files like text files
tests: check --[short]stat output after chmod
test: modernize style of t4006
Conflicts:
diff.c
Spend only minimum number of columns necessary to show the number of lines
in the output from "diff --stat", instead of always allocating 4 columns
even when showing changes that are much smaller than 1000 lines.
By Zbigniew Jędrzejewski-Szmek
* zj/diff-stat-smaller-num-columns:
diff --stat: use less columns for change counts
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (2)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
If two objects are known to be equal, there is no point running the diff.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mode-only changes to binary files without content change were reported as
if they were rewritten, but text files in the same situation were reported
as "unchanged". Let's treat binary files like text files here, and simply
say that they are unchanged.
Output of --shortstat is modified in the same way.
Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Forbids rename detection logic from matching two empty files as renames
during merge-recursive to prevent mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
The recent change to compute the width of diff --stat did not take into
consideration the output from --graph. The consequence is that when both
options are used, e.g. in 'log --stat --graph', the lines are too long.
Adjust stat width calculations to take --graph output into account.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The regexp configured with wordregex was incorrectly reused across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Resurrects the preparatory clean-up patches from another topic that was
discarded, as this would give a saner foundation to build on diff.algo
configuration option series.
* jc/diff-algo-cleanup:
xdiff: PATIENCE/HISTOGRAM are not independent option bits
xdiff: remove XDL_PATCH_* macros
Our rename detection is a heuristic, matching pairs of
removed and added files with similar or identical content.
It's unlikely to be wrong when there is actual content to
compare, and we already take care not to do inexact rename
detection when there is not enough content to produce good
results.
However, we always do exact rename detection, even when the
blob is tiny or empty. It's easy to get false positives with
an empty blob, simply because it is an obvious content to
use as a boilerplate (e.g., when telling git that an empty
directory is worth tracking via an empty .gitignore).
This patch lets callers specify whether or not they are
interested in using empty files as rename sources and
destinations. The default is "yes", keeping the original
behavior. It works by detecting the empty-blob sha1 for
rename sources and destinations.
One more flexible alternative would be to allow the caller
to specify a minimum size for a blob to be "interesting" for
rename detection. But that would catch small boilerplate
files, not large ones (e.g., if you had the GPL COPYING file
in many directories).
A better alternative would be to allow a "-rename"
gitattribute to allow boilerplate files to be marked as
such. I'll leave the complexity of that solution until such
time as somebody actually wants it. The complaints we've
seen so far revolve around empty files, so let's start with
the simple thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git log --graph --stat -p" broke the ancestry graph lines
with a single empty line between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using word diff, the code sets the word_regex from various
defaults if it was not set already. The problem is that it does this
on the original diff_options, which will also be used in subsequent
diffs.
This means that when the word_regex is not given on the command line,
only the first diff for which a setting for word_regex (either from
attributes or diff.wordRegex) ever takes effect. This value then
propagates to the rest of the diff runs and in particular prevents
further attribute lookups.
Fix the problem of changing diff state once and for all, by working
with a _copy_ of the diff_options.
Noticed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite a chunk of builtin_diff_cmd deals with word-diff setup, defaults
and such. This makes the function a bit hard to read, but is also
asymmetric because the corresponding teardown lives in free_diff_words_data
already.
Refactor into a new function init_diff_words_data. For simplicity,
also shuffle around some functions it depends on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff-index" and its friends at the plumbing level showed the
"diff --git" header and nothing else for a path whose cached stat
info is dirty without actual difference when asked to produce a
patch. This was a longstanding bug that we could have fixed long
time ago.
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
The plumbing "diff" commands look at the working tree files without
refreshing the index themselves for performance reasons (the calling
script is expected to do that upfront just once, before calling one or
more of them). In the early days of git, they showed the "diff --git"
header before they actually ask the xdiff machinery to produce patches,
and ended up showing only these headers if the real contents are the same
and the difference they noticed was only because the stat info cached in
the index did not match that of the working tree. It was too late for the
implementation to take the header that it already emitted back.
But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19)
introduced necessary logic to keep the meta-information headers in a
strbuf and delay their output until the xdiff machinery noticed actual
changes. This was primarily in order to generate patches that ignore
whitespaces. When operating under "-w" mode, we wouldn't know if the
header is needed until we actually look at the resulting patch, so it was
a sensible thing to do, but we did not realize that the same reasoning
applies to stat-dirty paths.
Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary
file, 2010-05-26) generalized this machinery and added must_show_header
toggle. This is turned on when the header must be shown even when there
is no patch to be produced, e.g. only the mode was changed, or the path
was renamed, without changing the contents. However, when it did so, it
still kept the special case for the "-w" mode, which meant that the
plumbing would keep showing these phantom changes.
This corrects this historical inconsistency by allowing the plumbing to
omit paths that are only stat-dirty from its output in the same way as it
handles whitespace only changes under "-w" option.
The change in the behaviour can be seen in the updated test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Default to the real terminal width for diff --stat output, instead
of the hard-coded 80 columns.
Some projects (especially in Java), have long filename paths, with
nested directories or long individual filenames. When files are
renamed, the filename part in stat output can be almost useless. If
the middle part between { and } is long (because the file was moved to
a completely different directory), then most of the path would be
truncated.
It makes sense to detect and use the full terminal width and display
full filenames if possible.
The are commands like diff, show, and log, which can adapt the output
to the terminal width. There are also commands like format-patch,
whose output should be independent of the terminal width. Since it is
safer to use the 80-column default, the real terminal width is only
used if requested by the calling code by setting diffopts.stat_width=-1.
Normally this value is 0, and can be set by the user only to a
non-negative value, so -1 is safe to use internally.
This patch only changes the diff builtin to use the full terminal width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the default Myers, patience and histogram algorithms cannot be in
effect at the same time, XDL_PATIENCE_DIFF and XDL_HISTOGRAM_DIFF are not
independent bits. Instead of wasting one bit per algorithm, define a few
macros to access the few bits they occupy and update the code that access
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit 3ed74e6 (diff --stat: ensure at least one '-' for deletions,
and one '+' for additions, 2006-09-28) improved the output for files with
tiny modifications, we accidentally broke the logic to ensure that two
equal sized changes are shown with the bars of the same length, even when
rounding errors exist.
Compute the length of the graph bars, using the same "non-zero changes is
shown with at least one column" scaling logic, but by scaling the sum of
additions and deletions to come up with the total length of the bar (this
ensures that two equal sized changes result in bars of the same length),
and then scaling the smaller of the additions or deletions. The other side
is computed as the difference between the two.
This makes the apportioning between additions and deletions less accurate
due to rounding errors, but it is much less noticeable than two files with
the same amount of change showing bars of different length.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the userdiff_config function was introduced in be58e70
(diff: unify external diff and funcname parsing code,
2008-10-05), it used a return value convention unlike any
other config callback. Like other callbacks, it used "-1" to
signal error. But it returned "1" to indicate that it found
something, and "0" otherwise; other callbacks simply
returned "0" to indicate that no error occurred.
This distinction was necessary at the time, because the
userdiff namespace overlapped slightly with the color
configuration namespace. So "diff.color.foo" could mean "the
'foo' slot of diff coloring" or "the 'foo' component of the
"color" userdiff driver". Because the color-parsing code
would die on an unknown color slot, we needed the userdiff
code to indicate that it had matched the variable, letting
us bypass the color-parsing code entirely.
Later, in 8b8e862 (ignore unknown color configuration,
2009-12-12), the color-parsing code learned to silently
ignore unknown slots. This means we no longer need to
protect userdiff-matched variables from reaching the
color-parsing code.
We can therefore change the userdiff_config calling
convention to a more normal one. This drops some code from
each caller, which is nice. But more importantly, it reduces
the cognitive load for readers who may wonder why
userdiff_config is unlike every other config callback.
There's no need to add a new test confirming that this
works; t4020 already contains a test that sets
diff.color.external.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word-diff logic accumulates + and - lines until another line type
appears (normally [ @\]), at which point it generates the word diff.
This is usually correct, but it breaks when the preimage does not have
a newline at EOF:
$ printf "%s" "a a a" >a
$ printf "%s\n" "a ab a" >b
$ git diff --no-index --word-diff a b
diff --git 1/a 2/b
index 9f68e94..6a7c02f 100644
--- 1/a
+++ 2/b
@@ -1 +1 @@
[-a a a-]
No newline at end of file
{+a ab a+}
Because of the order of the lines in a unified diff
@@ -1 +1 @@
-a a a
\ No newline at end of file
+a ab a
the '\' line flushed the buffers, and the - and + lines were never
matched with each other.
A proper fix would defer such markers until the end of the hunk.
However, word-diff is inherently whitespace-ignoring, so as a cheap
fix simply ignore the marker (and hide it from the output).
We use a prefix match for '\ ' to parallel the logic in
apply.c:parse_fragment(). We currently do not localize this string
(just accept other variants of it in git-apply), but this should be
future-proof.
Noticed-by: Ivan Shirokoff <shirokoff@yandex-team.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the option -W/--function-context to git diff. It is similar to
the same option of git grep and expands the context of change hunks
so that the whole surrounding function is shown. This "natural"
context can allow changes to be understood better.
Note: GNU patch doesn't like diffs generated with the new option;
it seems to expect context lines to be the same before and after
changes. git apply doesn't complain.
This implementation has the same shortcoming as the one in grep,
namely that there is no way to explicitly find the end of a
function. That means that a few lines of extra context are shown,
right up to the next recognized function begins. It's already
useful in its current form, though.
The function get_func_line() in xdiff/xemit.c is extended to work
forward as well as backward to find post-context as well as
pre-context. It returns the position of the first found matching
line. The func_line parameter is made optional, as we don't need
it for -W.
The enhanced function is then used in xdl_emit_diff() to extend
the context as needed. If the added context overlaps with the
next change, it is merged into the current hunk.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 582aa00 (git diff too slow for a file, 2010-05-02)
unconditionally dropped XDF_NEED_MINIMAL option from the internal xdiff
invocation to help performance on pathological cases, while hinting that a
follow-up patch could reintroduce it with "--minimal" option from the
command line.
Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff -p" piped to external diffstat and "git diff --stat" may see
different patch text (both are valid and describe the same change
correctly) when counting the number of added and deleted lines, arriving
at different results to confuse the users, as --stat/--numstat codepath
always uses the hardcoded -U0 as the context length.
Make --stat/--numstat codepath to honor the context length the same way
as the textual patch codepath does to avoid this problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
The diff config callback is split into two functions: one
which loads "ui" config, and one which loads "basic" config.
The former chains to the latter, as the diff UI config is a
superset of the plumbing config.
The color.diff variable is only loaded in the UI config.
However, the basic config actually chains to
git_color_default_config, which loads color.ui. This doesn't
actually cause any bugs, because the plumbing diff code does
not actually look at the value of color.ui.
However, it is somewhat nonsensical, and it makes it
difficult to refactor the color code. It probably came about
because there is no git_color_config to load only color
config, but rather just git_color_default_config, which
loads color config and chains to git_default_config.
This patch splits out the color-specific portion of
git_color_default_config so that the diff UI config can call
it directly. This is perhaps better explained by the
chaining of callbacks. Before we had:
git_diff_ui_config
-> git_diff_basic_config
-> git_color_default_config
-> git_default_config
Now we have:
git_diff_ui_config
-> git_color_config
-> git_diff_basic_config
-> git_default_config
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/histogram-diff:
xdiff/xhistogram: drop need for additional variable
xdiff/xhistogram: rely on xdl_trim_ends()
xdiff/xhistogram: rework handling of recursed results
xdiff: do away with xdl_mmfile_next()
Make test number unique
xdiff/xprepare: use a smaller sample size for histogram diff
xdiff/xprepare: skip classification
teach --histogram to diff
t4033-diff-patience: factor out tests
xdiff/xpatience: factor out fall-back-diff function
xdiff/xprepare: refactor abort cleanups
xdiff/xprepare: use memset()
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show
that it is faster than its --patience cousin, as well as the default
Meyers algorithm.
The implementation has been reworked to use structs and pointers,
instead of bitmasks, thus doing away with JGit's 2^28 line limit.
We also use xdiff's default hash table implementation (xdl_hash_bits()
with XDL_HASHLONG()) for convenience.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
Refactor the "do not stop feeding the backend early" logic into a small
helper function and use it in both run_diff_files() and diff_tree() that
has the stop-early optimization. We may later add other types of diffcore
transformation that require to look at the whole result like diff-filter
does, and having the logic in a single place is essential for longer term
maintainability.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often one is interested in the full --stat output only for commits which
change a few files, but not others, because larger restructuring gives a
--stat which fills a few screens.
Introduce a new option --stat-count=<count> which limits the --stat output
to the first <count> lines, followed by a "..." line. It can
also be given as the third parameter in
--stat=<width>,<name-width>,<count>.
Also, the unstuck form is supported analogous to the other two stat
parameters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, --stat calculates the longest name from all items but then
drops some (mode changes) from the output later on.
Instead, drop them from the namelen generation and calculation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function actually does two things:
1. Load the userdiff driver for the filespec.
2. Decide whether the driver has a textconv component, and
initialize the textconv cache if applicable.
Only part (1) requires the filespec object, and some callers
may not have a filespec at all. So let's split them it into
two functions, and put part (2) with the userdiff code,
which is a better fit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With diff.suppress-blank-empty=true, "git diff --word-diff" would
output data that had been read from uninitialized heap memory.
The problem was that fn_out_consume did not account for the
possibility of a line with length 1, i.e., the empty context line
that diff.suppress-blank-empty=true converts from " \n" to "\n".
Since it assumed there would always be a prefix character (the space),
it decremented "len" unconditionally, thus passing len=0 to emit_line,
which would then blindly call emit_line_0 with len=-1 which would
pass that value on to fwrite as SIZE_MAX. Boom.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
