* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
* js/mailinfo:
mailsplit: minor clean-up in read_line_with_nul()
mailinfo: apply the same fix not to lose NULs in BASE64 and QP codepaths
mailsplit and mailinfo: gracefully handle NUL characters
* jc/add-n-u:
Make git add -n and git -u -n output consistent
"git-add -n -u" should not add but just report
Conflicts:
builtin-add.c
builtin-mv.c
cache.h
read-cache.c
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
* jc/apply-whitespace:
builtin-apply: do not declare patch is creation when we do not know it
builtin-apply: accept patch to an empty file
builtin-apply: typofix
* ar/batch-cat:
change quoting in test t1006-cat-file.sh
builtin-cat-file.c: use parse_options()
git-svn: Speed up fetch
Git.pm: Add hash_and_insert_object and cat_blob
Git.pm: Add command_bidi_pipe and command_close_bidi_pipe
git-hash-object: Add --stdin-paths option
Add more tests for git hash-object
Move git-hash-object tests from t5303 to t1007
git-cat-file: Add --batch option
git-cat-file: Add --batch-check option
git-cat-file: Make option parsing a little more flexible
git-cat-file: Small refactor of cmd_cat_file
Add tests for git cat-file
* cc/bisect:
bisect: use a detached HEAD to bisect
bisect: trap critical errors in "bisect_start"
bisect: fix left over "BISECT_START" file when starting with junk rev
bisect: add test cases to check that "git bisect start" is atomic
* ap/svn:
git-svn: add test for --add-author-from and --use-log-author
git-svn: add documentation for --add-author-from option.
git-svn: Add --add-author-from option.
git-svn: add documentation for --use-log-author option.
* js/cvsexportcommit:
cvsexportcommit: introduce -W for shared working trees (between Git and CVS)
cvsexportcommit: chomp only removes trailing whitespace
Conflicts:
git-cvsexportcommit.perl
* js/ignore-submodule:
Ignore dirty submodule states during rebase and stash
Teach update-index about --ignore-submodules
diff options: Introduce --ignore-submodules
* mo/cvsserver:
Documentation: Fix skipped section level
git-cvsserver: add ability to guess -kb from contents
implement gitcvs.usecrlfattr
git-cvsserver: add mechanism for managing working tree and current directory
The function fgets() has a big problem with NUL characters: it reads
them, but nobody will know if the NUL comes from the file stream, or
was appended at the end of the line.
So implement a custom read_line_with_nul() function.
Noticed by Tommy Thorn.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/repack:
Documentation/git-repack.txt: document new -A behaviour
let pack-objects do the writing of unreachable objects as loose objects
add a force_object_loose() function
builtin-gc.c: deprecate --prune, it now really has no effect
git-gc: always use -A when manually repacking
repack: modify behavior of -A option to leave unreferenced objects unpacked
Conflicts:
builtin-pack-objects.c
* sp/ignorecase:
t0050: Fix merge test on case sensitive file systems
t0050: Add test for case insensitive add
t0050: Set core.ignorecase case to activate case insensitivity
t0050: Test autodetect core.ignorecase
git-init: autodetect core.ignorecase
This is a more appropriate location according to t/README.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first test in this series tests "git clone -l -s --reference B A C",
where repo B is a superset of repo A (A has one commit, B has the same
commit plus another). In this case, all objects to be cloned are already
present in B.
However, we should also test the case where the "--reference" repo is a
_subset_ of the source repo (e.g. "git clone -l -s --reference A B C"),
i.e. some objects are not available in the "--reference" repo, and will
have to be found in the source repo.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this case, the reference repository has some useful loose objects,
but not all useful objects, and we make sure that we can find the
objects we fetch from the repository we're cloning in the new
repository, instead of potentially being distracted by the reference
repository.
Doing the wrong thing in a builtin-clone implementation would lead to
this looking for an object in the wrong place, not finding it (because
it's only in the right place), and crashing.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing fails during "pull --rebase", you cannot just clean up the
working directory and call "pull --rebase" again, since the remote branch
was already fetched.
Therefore, die early when the working directory is dirty.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git bisect" was first written, it was not possible to
checkout a detached HEAD. The detached feature appeared latter.
That's why before this patch the "git bisect" process used a
"bisect" branch to checkout new revisions to be tested (and also
a "new-bisect" one to check if the checkouts could work).
This patch makes "git bisect" checkout revisions to be tested on
a detached HEAD. This simplifies the code a bit.
The tests to check that "git bisect" does not start if a
"bisect" or a "new-bisect" branch exists are removed as they
are not relevant any more.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, when using "git bisect start" with mistaken revs
or when the checkout of the branch we want to test failed, we exited
after having written files like ".git/BISECT_START",
".git/BISECT_NAMES" and after having written "refs/bisect/bad" and
"refs/bisect/good-*" refs.
With this patch we trap all errors that can happen when writing the
new state and when we are in "bisect_next". So that we can try to
clean up everything in case of problems, using "bisect_clean_state".
This patch also contains a "bisect_write" cleanup to make it exit
on error and return 0 otherwise.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, when using for example:
$ git bisect start <stuff1> <stuff2>
with <stuff1> or <stuff2> that cannot be parsed as a revision, we
could leave a ".git/BISECT_START" file, from a previous
"git bisect start", alone.
This patch makes sure that it does not happen by removing the
"BISECT_START" file in "bisect_clean_state" and then always writing
it again at the end of "bisect_start".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds some test cases to check that "git bisect start"
doesn't leave us in a bad state, especially when it fails.
These test cases show that "git bisect start" is not atomic when it
fails and leave some files like .git/BISECT_START, and in some
cases some refs, over.
The test failures should be fixed in latter commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/add-unreadable:
Add a config option to ignore errors for git-add
Add a test for git-add --ignore-errors
Add --ignore-errors to git-add to allow it to skip files with read errors
Extend interface of add_files_to_cache to allow ignore indexing errors
Make the exit code of add_file_to_index actually useful
* jk/maint-send-email-compose:
send-email: rfc2047-quote subject lines with non-ascii characters
send-email: specify content-type of --compose body
Conflicts:
t/t9001-send-email.sh
Due to 065096c (git-send-email.perl: Handle shell metacharacters in
$EDITOR properly, 2008-05-04) which is a backward incompatible change (but
it makes handling of EDITOR consistent with other parts of the system),
the test script t9001 had to be adjusted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always use 'utf-8' as the encoding, since we currently
have no way of getting the information from the user.
This also refactors the quoting of recipient names, since
both processes can share the rfc2047 quoting code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the compose message contains non-ascii characters, then
we assume it is in utf-8 and include the appropriate MIME
headers. If the user has already included a MIME-Version
header, then we assume they know what they are doing and
don't add any headers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of the test is not really to test the ability of the
filesystem to keep the given x-bit, but to check is merge-recursive
correctly handles it.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit with error if cd into the "trash directory" failed (error
already reported, so just exit).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see no context nor deleted line in the patch, we used to declare
that the patch creates a new file. But some people create an empty file
and then apply a patch to it. Similarly, a patch that delete everything
is not a deletion patch either.
This commit corrects these two issues. Together with the previous commit,
it allows a diff between an empty file and a line-ful file to be treated
as both creation patch and "add stuff to an existing empty file",
depending on the context. A new test t4126 demonstrates the fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a case sensitive filesystem, "git reset --hard" might refuse to
overwrite a file whose name differs only by case, even if
core.ignorecase is set. It is not clear which circumstances cause this
behavior. This commit simply works around the problem by removing
the case changing file before running "git reset --hard".
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The in-place mode of sed used in t7502-commit is a non-POSIX extension.
That call of sed is replaced by a more portable version using a temporary file.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is not initialized and you do not want to change the
defaults from .gitmodules anyway, you can now say
$ git submodule update --init <name>
When "update" is called without --init on an uninitialized submodule,
a hint to use --init is printed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "gitcvs.allbinary" is set to "guess", then any file that has
not been explicitly marked as binary or text using the "crlf" attribute
and the "gitcvs.usecrlfattr" config will guess binary based on the contents
of the file.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult
the "crlf" for each file to determine if it should mark the file
as binary (-kb).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a CVS checkout, it is easy to import the CVS history by
calling "git cvsimport". However, interacting with the CVS repository
using "git cvsexportcommit" was cumbersome, since that script assumes
separate working directories for Git and CVS.
Now, you can call cvsexportcommit with the -W option. This will
automatically discover the GIT_DIR, and it will check out the parent
commit before exporting the commit.
The intended workflow is this:
$ CVSROOT=$URL cvs co module
$ cd module
$ git cvsimport
hack, hack, hack, making two commits, cleaning them up using rebase -i.
$ git cvsexportcommit -W -c -p -u HEAD^
$ git cvsexportcommit -W -c -p -u HEAD
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing or stashing, chances are that you do not care about
dirty submodules, since they are not updated by those actions anyway.
So ignore the submodules' states.
Note: the submodule states -- as committed in the superproject --
will still be stashed and rebased, it is _just_ the state of the
submodule in the working tree which is ignored.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
