Exit with an error if a prefix provided to `git read-tree --prefix` begins
with '/'. In most cases, prefixes like this result in an "invalid path"
error; however, the repository root would be interpreted as valid when
specified as '--prefix=/'. This is due to leniency around trailing directory
separators on prefixes (e.g., allowing both '--prefix=my-dir' and
'--prefix=my-dir/') - the '/' in the prefix is actually the *trailing*
slash, although it could be misinterpreted as a *leading* slash.
To remove the confusing repo root-as-'/' case and make it clear that
prefixes should not begin with '/', exit with an error if the first
character of the provided prefix is '/'.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the 'recursive' diff option for the diff executed as part of 'git
status'. Without the 'recursive' enabled, 'git status' reports index
changes incorrectly when the following conditions were met:
* sparse index is enabled
* there is a difference between the index and HEAD in a file inside a
*subdirectory* of a sparse directory
* the sparse directory index entry is *not* expanded in-core
Because it is not recursive by default, the diff in 'git status' reports
changes only at the level of files and directories that are immediate
children of a sparse directory, rather than recursing into directories with
changes to identify the modified file(s). As a result, 'git status' reports
the immediate subdirectory itself as "modified".
Example:
$ git init
$ mkdir -p sparse/sub
$ echo test >sparse/sub/foo
$ git add .
$ git commit -m "commit 1"
$ echo somethingelse >sparse/sub/foo
$ git add .
$ git commit -a -m "commit 2"
$ git sparse-checkout set --cone --sparse-index 'sparse'
$ git reset --soft HEAD~1
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub
Enabling the 'recursive' diff option in 'wt_status_collect_changes_index'
corrects this issue by allowing the diff to recurse into subdirectories of
sparse directories to find modified files. Given the same repository setup
as the example above, the corrected result of `git status` is:
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub/foo
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prevent the repository root from being collapsed into a sparse directory by
treating an empty path as "inside the sparse-checkout". When collapsing a
sparse index (e.g. in 'git sparse-checkout reapply'), the root directory
typically could not become a sparse directory due to the presence of in-cone
root-level files and directories. However, if no such in-cone files or
directories were present, there was no explicit check signaling that the
"repository root path" (an empty string, in the case of
'convert_to_sparse(...)') was in-cone, and a sparse directory index entry
would be created from the repository root directory.
The documentation in Documentation/git-sparse-checkout.txt explicitly states
that the files in the root directory are expected to be in-cone for a
cone-mode sparse-checkout. Collapsing the root into a sparse directory entry
violates that assumption, as sparse directory entries are expected to be
outside the sparse cone and have SKIP_WORKTREE enabled. This invalid state
in turn causes issues with commands that interact with the index, e.g.
'git status'.
Treating an empty (root) path as in-cone prevents the creation of a root
sparse directory in 'convert_to_sparse(...)'. Because the repository root is
otherwise never compared with sparse patterns (in both cone-mode and
non-cone sparse-checkouts), the new check does not cause additional changes
to how sparse patterns are applied.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph --graph" used to leak a graph structure, and there
was no way to countermand "--graph" that appear earlier on the
command line. A "--no-graph" option has been added and resource
leakage has been plugged.
* ah/log-no-graph:
log: add a --no-graph option
log: fix memory leak if --graph is passed multiple times
Fix tests that are unnecessarily specific to ref-files backend.
* hw/t1410-adjust-test-for-reftable:
t1410: mark bufsize boundary test as REFFILES
t1410: use test-tool ref-store to inspect reflogs
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
When there is no object to write .bitmap file for, "git
multi-pack-index" triggered an error, instead of just skipping,
which has been corrected.
* tb/midx-no-bitmap-for-no-objects:
midx: prevent writing a .bitmap without any objects
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
Because a deletion of ref would need to remove it from both the
loose ref store and the packed ref store, a delete-ref operation
that logically removes one ref may end up invoking ref-transaction
hook twice, which has been corrected.
* ps/avoid-unnecessary-hook-invocation-with-packed-refs:
refs: skip hooks when deleting uncovered packed refs
refs: do not execute reference-transaction hook on packing refs
refs: demonstrate excessive execution of the reference-transaction hook
refs: allow skipping the reference-transaction hook
refs: allow passing flags when beginning transactions
refs: extract packed_refs_delete_refs() to allow control of transaction
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
Style updates on a test script helper.
* sy/modernize-t-lib-read-tree-m-3way:
t/lib-read-tree-m-3way: indent with tabs
t/lib-read-tree-m-3way: modernize style
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
"git log" and friends learned an option --exclude-first-parent-only
to propagate UNINTERESTING bit down only along the first-parent
chain, just like --first-parent option shows commits that lack the
UNINTERESTING bit only along the first-parent chain.
* jz/rev-list-exclude-first-parent-only:
git-rev-list: add --exclude-first-parent-only flag
Unlike "git apply", "git patch-id" did not handle patches with
hunks that has only 1 line in either preimage or postimage, which
has been corrected.
* jz/patch-id-hunk-header-parsing-fix:
patch-id: fix scan_hunk_header on diffs with 1 line of before/after
patch-id: fix antipatterns in tests
Prepare more test scripts for the introduction of reftable.
* hn/reftable-tests:
t5312: prepare for reftable
t1405: mark test that checks existence as REFFILES
t1405: explictly delete reflogs for reftable
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
"git diff --diff-filter=aR" is now parsed correctly.
* js/diff-filter-negation-fix:
diff-filter: be more careful when looking for negative bits
diff.c: move the diff filter bits definitions up a bit
docs(diff): lose incorrect claim about `diff-files --diff-filter=A`
Interaction between fetch.negotiationAlgorithm and
feature.experimental configuration variables has been corrected.
* en/fetch-negotiation-default-fix:
repo-settings: rename the traditional default fetch.negotiationAlgorithm
repo-settings: fix error handling for unknown values
repo-settings: fix checking for fetch.negotiationAlgorithm=default
A bug that made multi-pack bitmap and the object order out-of-sync,
making the .midx data corrupt, has been fixed.
* tb/midx-bitmap-corruption-fix:
pack-bitmap.c: gracefully fallback after opening pack/MIDX
midx: read `RIDX` chunk when present
t/lib-bitmap.sh: parameterize tests over reverse index source
t5326: move tests to t/lib-bitmap.sh
t5326: extract `test_rev_exists`
t5326: drop unnecessary setup
pack-revindex.c: instrument loading on-disk reverse index
midx.c: make changing the preferred pack safe
t5326: demonstrate bitmap corruption after permutation
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
Problems identified by Coverity in the reftable code have been
corrected.
* hn/reftable-coverity-fixes:
reftable: add print functions to the record types
reftable: make reftable_record a tagged union
reftable: remove outdated file reftable.c
reftable: implement record equality generically
reftable: make reftable-record.h function signatures const correct
reftable: handle null refnames in reftable_ref_record_equal
reftable: drop stray printf in readwrite_test
reftable: order unittests by complexity
reftable: all xxx_free() functions accept NULL arguments
reftable: fix resource warning
reftable: ignore remove() return value in stack_test.c
reftable: check reftable_stack_auto_compact() return value
reftable: fix resource leak blocksource.c
reftable: fix resource leak in block.c error path
reftable: fix OOB stack write in print functions
The command line completion (in contrib/) learns to complete
arguments to give to "git sparse-checkout" command.
* ld/sparse-index-bash-completion:
completion: handle unusual characters for sparse-checkout
completion: improve sparse-checkout cone mode directory completion
completion: address sparse-checkout issues
When "git fetch --prune" failed to prune the refs it wanted to
prune, the command issued error messages but exited with exit
status 0, which has been corrected.
* tg/fetch-prune-exit-code-fix:
fetch --prune: exit with error if pruning fails
Pick a better random number generator and use it when we prepare
temporary filenames.
* bc/csprng-mktemps:
wrapper: use a CSPRNG to generate random file names
wrapper: add a helper to generate numbers from a CSPRNG
Doc and test update around the eol attribute.
* bc/clarify-eol-attr:
docs: correct documentation about eol attribute
t0027: add tests for eol without text in .gitattributes
It's useful to be able to countermand a previous --graph option, for
example if `git log --graph` is run via an alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fiddles with files under .git/logs to recreate a condition
that is unlikely to warrant special attention under reftable, as
reflog blocks are zlib compressed.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the test compatible with reftable (it doesn't pass yet for
other reasons, unfortunately)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `|` at line end already imples that the statement is not over.
So a `\` after that is redundant.
Signed-off-by: Jaydeep P Das <jaydeepjd.8914@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark in various places in the code that the sparse index and the
split index features are mutually incompatible.
* js/sparse-vs-split-index:
split-index: it really is incompatible with the sparse index
t1091: disable split index
sparse-index: sparse index is disallowed when split index is active
Cloning from a repository that does not yet have any branches or
tags but has other refs resulted in a "remote transport reported
error", which has been corrected.
* jt/clone-not-quite-empty:
clone: support unusual remote ref configurations
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
"git name-rev --stdin" does not behave like usual "--stdin" at
all. Start the process of renaming it to "--annotate-stdin".
* jc/name-rev-stdin:
name-rev.c: use strbuf_getline instead of limited size buffer
name-rev: deprecate --stdin in favor of --annotate-stdin
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
"git add -p" rewritten in C regressed hunk splitting in some cases,
which has been corrected.
* pw/add-p-hunk-split-fix:
builtin add -p: fix hunk splitting
t3701: clean up hunk splitting tests
The conditional inclusion mechanism of configuration files using
"[includeIf <condition>]" learns to base its decision on the
URL of the remote repository the repository interacts with.
* jt/conditional-config-on-remote-url:
config: include file if remote URL matches a glob
config: make git_config_include() static
The merge-ort misbehaved when merge.renameLimit configuration is
set too low and failed to find all renames.
* en/merge-ort-restart-optim-fix:
merge-ort: avoid assuming all renames detected
