A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
"git rebase" did not exit with failure when format-patch it invoked
failed for whatever reason.
* cb/rebase-am-exit-code:
rebase: return non-zero error code if format-patch fails
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
Loosen restrictions on refspecs by allowing patterns that have a "*"
within a component instead of only as the whole component.
Remove the logic to accept a single "*" as a whole component from
check_refname_format(), and implement an extended form of that logic
in check_refname_component(). Pass the pointer to the flags argument
to the latter, as it has to clear REFNAME_REFSPEC_PATTERN bit when
it sees "*".
Teach check_refname_component() function to allow an asterisk "*"
only when REFNAME_REFSPEC_PATTERN is set in the flags, and drop the
bit after seeing a "*", to ensure that one side of a refspec
contains at most one asterisk.
This will allow us to accept refspecs such as `for/bar*:foo/baz*`.
Any refspec which functioned before shall continue functioning with
the new logic.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correctly specify all characters which are rejected under the '4: a
bad character' disposition, which did not list all characters that
are treated as such.
Cleanup comment style for rejected refs by inserting a ", or" at the
end of each statement.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cogito hasn't been maintained since late 2006, so drop the reference
to it. The warning that SCMS front-ends might override listed
environment variables, however, may still be valuable, so keep it but
generalize the wording.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d96a275b91.
It used to be possible to apply a patch series with "git am mbox"
and then only after seeing a failure, switch to three-way mode via
"git am -3" (no other options or arguments). The commit being
reverted broke this workflow.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-subtree's log format string uses "%ad" and "%cd", which
respect the user's configured log.date value.
This is problematic for git-subtree because it needs to use real
dates so that copied commits come through unchanged.
Add a test and tweak the format strings to use %aD and %cD
so that the default date format is used instead.
Reported-by: Bryan Jacobs <b@q3q.us>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for Fountain, a plain text screenplay format. Git
facilitates not just programming specifically, but creative writing
in general, so it makes sense to also support other plain text
documents besides source code.
In the structure of a screenplay specifically, scenes are roughly
analogous to functions, in the sense that it makes your job easier
if you can see which ones were changed in a given range of patches.
More information about the Fountain format can be found on its
official website, at http://fountain.io .
Signed-off-by: Zoë Blade <zoe@bytenoise.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If HEAD of a repository points to a conflict reference, such as:
* There exist a reference named 'refs/heads/jx/feature1', but HEAD
points to 'refs/heads/jx', or
* There exist a reference named 'refs/heads/feature', but HEAD points
to 'refs/heads/feature/bad'.
When we push to delete a reference for this repo, such as:
git push /path/to/bad-head-repo.git :some/good/reference
The git-receive-pack process will crash.
This is because if HEAD points to a conflict reference, the function
`resolve_refdup("HEAD", ...)` does not return a valid reference name,
but a null buffer. Later matching the delete reference against the null
buffer will cause git-receive-pack crash.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase learned to stash changes when it encounters a dirty work tree,
but git pull --rebase does not.
Only verify if the working tree is dirty when rebase.autostash is not
enabled.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-send-pack is exec'ed, as is done by git-remote-http, it
does not read the config, and configured value of user.signingkey is
ignored. Thus it was impossible to specify a signing key over HTTP,
other than the default key in the keyring having a User ID matching
the "Name <email>" format.
This patch at least partially fixes the problem by reading in the GPG
config from within send-pack. It does not address the related problem
of plumbing a value for this configuration option using
`git -c user.signingkey push ...`.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in support of alternate ref backends which don't necessarily
store reflogs as files.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the creation of a ref (e.g. stash) with a reflog already in
place. For most refs (e.g. those under refs/heads), this happens
automatically, but for others, we need this option.
Currently, git does this by pre-creating the reflog, but alternate ref
backends might store reflogs somewhere other than .git/logs. Code
that now directly manipulates .git/logs should instead use git
plumbing commands.
I also added --create-reflog to git tag, just for completeness.
In a moment, we will use this argument to make git stash work with
alternate ref backends.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a flag to allow forcing the creation of a reflog even if the ref
name and core.logAllRefUpdates setting would not ordinarily cause ref
creation.
In a moment, we will use this to add options to git tag and git
update-ref to force reflog creation.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary because alternate ref backends might store reflogs
somewhere other than .git/logs. Code that now directly manipulates
.git/logs should instead go through git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe_create_reflog function creates a reflog, if it does not
already exist.
The log_ref_setup function becomes private and gains a force_create
parameter to force the creation of a reflog even if log_all_ref_updates
is false or the refname is not one of the special refnames.
The new parameter also reduces the need to store, modify, and restore
the log_all_ref_updates global before reflog creation.
In a moment, we will use this to add reflog creation commands to
git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an err argument to log_ref_setup that can explain the reason
for a failure. This then eliminates the need to manage errno through
this function since we can just add strerror(errno) to the err string
when meaningful. No callers relied on errno from this function for
anything else than the error message.
Also add err arguments to private functions write_ref_to_lockfile,
log_ref_write_1, commit_ref_update. This again eliminates the need to
manage errno in these functions.
Some error messages are slightly reordered.
Update of a patch by Ronnie Sahlberg.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't update files in the worktree from cache entries which are
flagged with CE_WT_REMOVE.
When a user does a sparse checkout, git removes files that are
marked with CE_WT_REMOVE (because they are out-of-scope for the
sparse checkout). If those files are also marked CE_UPDATE (for
instance, because they differ in the branch that is being checked
out and the outgoing branch), git would previously recreate them.
This patch prevents them from being recreated.
These erroneously-created files would also interfere with merges,
causing pre-merge revisions of out-of-scope files to appear in the
worktree.
apply_sparse_checkout() is the function where all "action"
manipulation (add, delete, update files..) for sparse checkout
occurs; it should not ask to delete and update both at the same
time.
Signed-off-by: Anatole Shaw <git-devel@omni.poc.net>
Signed-off-by: David Turner <dturner@twopensource.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of strftime is poorly designed; when it
returns 0, the caller cannot tell if the buffer was not
large enough, or if the output was actually 0 bytes. In the
original implementation of strbuf_addftime, we simply punted
and guessed that our 128-byte hint would be large enough.
We can do better, though, if we're willing to treat strftime
like less of a black box. We can munge the incoming format
to make sure that it never produces 0-length output, and
then "fix" the resulting output. That lets us reliably grow
the buffer based on strftime's return value.
Clever-idea-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the untracked status indicator is enabled, __git_ps1() looks for
untracked files by running 'git ls-files'. This can be perceptibly slow
in case of an untracked directory containing lot of files, because it
lists all files found in the untracked directory only to be redirected
into /dev/null right away (this is the actual command run by __git_ps1()):
$ ls untracked-dir/ |wc -l
100000
$ time git ls-files --others --exclude-standard --error-unmatch \
-- ':/*' >/dev/null 2>/dev/null
real 0m0.955s
user 0m0.936s
sys 0m0.016s
Eliminate this delay by additionally passing the '--directory
--no-empty-directory' options to 'git ls-files' to show only the name of
non-empty untracked directories instead of all their content:
$ time git ls-files --others --exclude-standard --directory \
--no-empty-directory --error-unmatch -- ':/*' >/dev/null 2>/dev/null
real 0m0.010s
user 0m0.008s
sys 0m0.000s
This follows suit of ea95c7b8f5 (completion: improve untracked directory
filtering for filename completion, 2013-09-18).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will tweak the way __git_ps1() decides whether to display
the untracked files status indicator in the presence of untracked
directories. Add tests to make sure it doesn't change current behavior,
in particular that an empty untracked directory doesn't trigger the
untracked files status indicator.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree no longer relies upon git-checkout for new branch
creation, new worktree HEAD set up, or initial worktree population,
git-checkout no longer needs intimate knowledge that it may be operating
in a newly created worktree. Therefore, drop 'new_worktree_mode' and the
private GIT_CHECKOUT_NEW_WORKTREE environment variable by which
git-worktree communicated to git-checkout that it was being invoked to
manipulate a new worktree.
This reverts the remaining changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree handles all functionality (--force, --detach,
-b/-B) previously delegated to git-checkout, actual population of the
new worktree can be accomplished more directly and lightweight with
"git reset --hard" in place of "git checkout".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree sets HEAD explicitly to its final value via either
git-symbolic-ref or git-update-ref, rather than relying upon
git-checkout to do so, the "hack" for pacifying is_git_directory() with
a temporary HEAD, though still necessary, can be simplified.
Since the real HEAD is now populated with its proper final value, the
value of the temporary HEAD truly no longer matters, and any value which
looks like an object ID is good enough to satisfy is_git_directory().
Therefore, just set the temporary HEAD to a literal value rather than
going through the effort of resolving the current branch's HEAD.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates setting of HEAD in the new worktree and
initial worktree population into a single git-checkout invocation which
requires git-checkout to have special knowledge that it is operating on
a newly created worktree. The eventual goal is to rid git-checkout of
that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to delegate to git-branch the setting of the new worktree's HEAD to the
desired branch (or commit, if detached). Therefore, make git-worktree
itself responsible for setting up HEAD as either a symbolic reference,
if associated with a branch, or detached, if not.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates setting of HEAD in the new worktree
with initial worktree population via a single git-checkout invocation,
which requires git-checkout to have special knowledge that it is
operating in a newly created worktree. The eventual goal is to separate
these operations and rid git-checkout of that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to rely upon git-branch to determine the state of the worktree (branch
name or detached), or to check for error conditions, such as the
requested branch already checked out elsewhere, or an invalid reference.
Therefore, imbue git-worktree with the intelligence to determine a
branch name or detached state locally, and to perform error checking on
its own.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller of add_worktree() provides it with a command to invoke to
populate the new worktree. This was a useful abstraction during the
conversion of "git checkout --to" functionality to "git worktree add"
since git-checkout and git-worktree constructed the population command
differently. However, now that "git checkout --to" has been retired, and
add_worktree() has access to the options given to "worktree add", this
extra indirection is no longer useful and makes the code a bit
convoluted.
Moreover, the eventual goal is for git-worktree to make setting of HEAD
and worktree population distinct operations, whereas they are currently
conflated into a single git-checkout invocation. As such, add_worktree()
will eventually invoke other commands in addition to the worktree
population command, so it will be doing command construction itself
anyhow.
Therefore, relocate construction of the worktree population command from
add() to add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of 'struct child_process.env' to make it obvious that
environment variables set by add_worktree() are intended specifically
for sub-commands it invokes to operate in the new worktree.
We assign a local 'struct argv_array' to child_process.env, rather than
utilizing the child_process.env_array 'struct argv_array', because
future patches will make add_worktree() invoke additional sub-commands,
and it's simpler to populate the environment array just once, whereas
child_process.env_array gets cleared after each invocation, thus would
require re-population for each sub-command.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates branch creation, setting of HEAD in the
new worktree, and worktree population into a single sub-invocation of
git-checkout, which requires git-checkout to be specially aware that it
is operating in a newly-created worktree. The goal is to free
git-checkout of that special knowledge, and to do so, git-worktree will
eventually perform those operations separately. Thus, as a first step,
rather than piggybacking on git-checkout's -b/-B ability to create a new
branch at checkout time, make git-worktree responsible for branch
creation itself.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix oversight where branch auto-vivication incorrectly kicks in when
--detach is specified and <branch> omitted. Instead, treat:
git worktree add --detach <path>
as shorthand for:
git worktree add --detach <path> HEAD
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Be consistent with git-checkout which disallows this (not particularly
meaningful) combination.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_worktree() will eventually need to deal with some options itself, so
introduce a structure into which options can be conveniently bundled,
and pass it along to add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'new_branch' be the name of the new branch for both forced and
non-forced cases; and add boolean 'force_new_branch' to indicate forced
branch creation. This will simplify logic later on when git-worktree
handles branch creation locally rather than delegating it to
git-checkout as part of the worktree population phase.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-worktree creates a new worktree, it reports:
Enter "<path>" (identifier <tag>)
which misleadingly implies that it is setting <path> as the working
directory (as if "cd <path>" had been invoked), whereas it's actually
preparing the new worktree by creating its administrative files, setting
HEAD, and populating it. Make this more clear by instead saying:
Preparing "<path>" (identifier <tag>)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates new branch creation, setting of HEAD in
the new wortkree, and worktree population into a single sub-invocation
of git-checkout. However, these operations will eventually be separated,
and git-worktree itself will need to be able to detect if the branch is
already checked out elsewhere, rather than relying upon git-branch to
make this determination, so publish die_if_checked_out().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkout() only understands symref-style HEAD (i.e. "ref:
refs/heads/master"), however, HEAD may also be a an actual symbolic link
(on platforms which support it). To accurately detect if a branch is
checked out elsewhere, it needs to handle symbolic link HEAD, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkout() only understands symref-style HEAD (i.e. "ref:
refs/heads/master"), however, HEAD may also be a an actual symbolic link
(on platforms which support it), thus it will need to check that style
HEAD, as well (via readlink()). As a preparatory step, simplify parsing
of symref-style HEAD so the actual branch check can be re-used easily
for symbolic links (in an upcoming patch).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When check_linked_checkout() discovers that the branch is already
checked out elsewhere, it emits the diagnostic:
'blorp' is already checked out at '/some/path/.git'
which is misleading since "checked out at" implies the working tree, but
".git" is the location of the repository administrative files. Fix by
dropping ".git" from the message.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to publish die_if_checked_out() so that callers other than
git-checkout can take advantage of it, however, those callers won't have
access to git-checkout's "struct branch_info". Therefore, change it to
accept the full name of the branch as a simple string instead.
While here, also give the argument a more meaningful name ("branch"
instead of "new").
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to keep the strbuf active long after its last use.
By releasing it as early as possible, resource management is simplified
and there is less worry about future changes resulting in a leak.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
die_if_checked_out() is intended to check if the branch about to be
checked out is already checked out either in the main worktree or in a
linked worktree. However, if .git/worktrees directory does not exist,
then it never bothers checking the main worktree, even though the
specified branch might indeed be checked out there, which is fragile
behavior.
This hasn't been a problem in practice since the current implementation
of "git worktree add" (and, earlier, "git checkout --to") always creates
.git/worktrees before die_if_checked_out() is called by the child "git
checkout" invocation which populates the new worktree.
However, git-worktree will eventually want to call die_if_checked_out()
itself rather than only doing so indirectly as a side-effect of invoking
git-checkout, and reliance upon order of operations (creating
.git/worktrees before checking if a branch is already checked out) is
fragile. As a general function, callers should not be expected to abide
by this undocumented and unwarranted restriction. Therefore, make
die_if_checked_out() more robust by checking the main worktree whether
.git/worktrees exists or not.
While here, also move a comment explaining why die_if_checked_out()'s
helper parses HEAD manually. Such information resides more naturally
with the helper itself rather than at its first point of call.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
