This enables gitk to show the patch text with correct glyphs if the locale
is not UTF-8.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mbox file must have been added by accident in e9fe804 (git-mailinfo:
Fix getting the subject from the in-body [PATCH] line, 2008-07-14).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus and other git developers from the early days trained their fingers
to type the command, every once in a while even without thinking, to check
the consistency of the repository back when the lower core part of the git
was still being developed. Developers who wanted to make sure that git
correctly dealt with packfiles could deliberately trigger their creation
and checked them after they were created carefully, but loose objects are
the ones that are written by various commands from random codepaths. It
made some technical sense to have a mode that checked only loose objects
from the debugging point of view for that reason.
Even for git developers, there no longer is any reason to type "git fsck"
every five minutes these days, worried that some newly created objects
might be corrupt due to recent change to git.
The reason we did not make "--full" the default is probably we trust our
filesystems a bit too much. At least, we trusted filesystems more than we
trusted the lower core part of git that was under development.
Once a packfile is created and we always use it read-only, there didn't
seem to be much point in suspecting that the underlying filesystems or
disks may corrupt them in such a way that is not caught by the SHA-1
checksum over the entire packfile and per object checksum. That trust in
the filesystems might have been a good tradeoff between fsck performance
and reliability on platforms git was initially developed on and for, but
it may not be true anymore as we run on many more platforms these days.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's nice to search for an author by merely clicking on their name in
gitweb. This is usually faster than selecting the name, copying the
selection, pasting it into the search box, selecting between
author/committer and then hitting enter.
Linkify the avatar icon in log/shortlog view because the icon is directly
adjacent to the name and thus more related. The same is not true
when in commit/tag view where the icon is farther away.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash list' had an undocumented limit of 10 stashes, unless other
git-log arguments were specified. This surprised at least one user,
but possibly served to cut the output below a screenful without using
a pager.
Since the last commit, 'git stash list' will fire up a pager according
to the same rules as the 'git log' it calls, so we can drop the limit.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new formats, we can rewrite 'git stash list' in terms of an
appropriate pretty format, instead of hand-editing with sed. This has
the advantage that it obeys the normal settings for git-log, notably
the pager.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll use the same output in an upcoming commit, so refactor its
formatting (which was duplicated anyway) into a separate function.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty_print_commit() has a bunch of rarely-used arguments, and
introducing more of them requires yet another update of all the call
sites. Refactor most of them into a struct to make future extensions
easier.
The ones that stay "plain" arguments were chosen on the grounds that
all callers put real arguments there, whereas some callers have 0/NULL
for all arguments that were factored into the struct.
We declare the struct 'const' to ensure none of the callers are bitten
by the changed (no longer call-by-value) semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SSL_set_fd (and friends) expects a OS file handle on Windows, not
a file descriptor as on UNIX(-ish).
This patch makes the Windows version of SSL_set_fd behave like the
UNIX versions, by calling _get_osfhandle on it's input.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the POSIX-specific tunneling code has been replaced
by the run-command API (and a compile-error has been
cleaned away), we can now enable imap-send on Windows
builds.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mmsystem.h (included from windows.h) defines DRV_OK to 1. To avoid
an error due to DRV_OK redefenition, this patch undefines the old
definition (i.e the one from mmsystem.h) before defining DRV_OK.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a patch that enables us to use the run-command
API, which is supported on Windows.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The imap-send code is based on code from isync, a program
for syncing imap mailboxes. Because of this, it has
inherited some code that makes sense for isync, but not for
imap-send.
In particular, when storing a message, it does one of:
- if the server supports it, note the server-assigned
unique identifier (UID) given to each message
- otherwise, assigned a random UID and store it in the
message header as X-TUID
Presumably this is used in isync to be able to synchronize
mailstores multiple times without duplication. But for
imap-send, the values are useless; we never do anything
with them and simply forget them at the end of the program.
This patch removes the useless code. Not only is it nice for
maintainability to get rid of dead code, but the removed
code relied on the existence of /dev/urandom, which made it
a portability problem for non-Unix platforms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also verify that multiple references to the _same_ note blob are _not_
concatenated.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, having multiple notes referring to the same commit from various
locations in the notes tree is strongly discouraged, since only one of those
notes will be parsed and shown.
This patch teaches the notes code to _concatenate_ multiple notes that
annotate the same commit. Notes are concatenated by creating a new blob
object containing the concatenation of the notes in question, and
replacing them with the concatenated note in the internal notes tree
structure.
Getting the concatenation right requires being more proactive in unpacking
subtree entries in the internal notes tree structure, so that we don't return
a note prematurely (i.e. before having found all other notes that annotate
the same object). As such, this patch may incur a small performance penalty.
Suggested-by: Sam Vilain <sam@vilain.net>
Re-suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics used when parsing notes trees (with regards to fanout subtrees)
follow Dscho's proposal fairly closely:
- No concatenation/merging of notes is performed. If there are several notes
objects referencing a given commit, only one of those objects are used.
- If a notes object for a given commit is present in the "root" notes tree,
no subtrees are consulted; the object in the root tree is used directly.
- If there are more than one subtree that prefix-matches the given commit,
only the subtree with the longest matching prefix is consulted. This
means that if the given commit is e.g. "deadbeef", and the notes tree have
subtrees "de" and "dead", then the following paths in the notes tree are
searched: "deadbeef", "dead/beef". Note that "de/adbeef" is NOT searched.
- Fanout directories (subtrees) must references a whole number of bytes
from the SHA1 sum they subdivide. E.g. subtrees "dead" and "de" are
acceptable; "d" and "dea" are not.
- Multiple levels of fanout are allowed. All the above rules apply
recursively. E.g. "de/adbeef" is preferred over "de/adbe/ef", etc.
This patch changes the in-memory datastructure for holding parsed notes:
Instead of holding all note (and subtree) entries in a hash table, a
simple 16-tree structure is used instead. The tree structure consists of
16-arrays as internal nodes, and note/subtree entries as leaf nodes. The
tree is traversed by indexing subsequent nibbles of the search key until
a leaf node is encountered. If a subtree entry is encountered while
searching for a note, the subtree is unpacked into the 16-tree structure,
and the search continues into that subtree.
The new algorithm performs significantly better in the cases where only
a fraction of the notes need to be looked up (this is assumed to be the
common case for notes lookup). The new code even performs marginally
better in the worst case (where _all_ the notes are looked up).
In addition to this, comes the massive performance win associated with
organizing the notes tree according to some fanout scheme. Even a simple
2/38 fanout scheme is dramatically quicker to traverse (going from tens of
seconds to sub-second runtimes).
As for memory usage, the new code is marginally better than the old code in
the worst case, but in the case of looking up only some notes from a notes
tree with proper fanout, the new code uses only a small fraction of the
memory needed to hold the entire notes tree.
However, there is one casualty of this patch. The old notes lookup code was
able to parse notes that were associated with non-SHA1s (e.g. refs). The new
code requires the referenced object to be named by a SHA1 sum. Still, this
is not considered a major setback, since the notes infrastructure was not
originally intended to annotate objects outside the Git object database.
Cc: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to be rude to memory-concious callers...
This patch has been improved by the following contributions:
- Junio C Hamano: avoid old-style declaration
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the following flags to get_commit_notes() for adjusting the
format of the produced note string:
- NOTES_SHOW_HEADER: Print "Notes:" line before the notes contents
- NOTES_INDENT: Indent notes contents by 4 spaces
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Creating repos with 10/100/1000/10000 commits and notes takes a lot of time.
However, using git-fast-import to do the job is a lot more efficient than
using plumbing commands to do the same.
This patch decreases the overall run-time of this test on my machine from
~3 to ~1 minutes.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a 'notemodify' subcommand of the 'commit' command. This subcommand
is similar to 'filemodify', except that no mode is supplied (all notes have
mode 0644), and the path is set to the hex SHA1 of the given "comittish".
This enables fast import of note objects along with their associated commits,
since the notes can now be named using the mark references of their
corresponding commits.
The patch also includes a test case of the added functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-m" and "-F" options are already the established method
(in both git-commit and git-tag) to specify a commit/tag message
without invoking the editor. This patch teaches "git notes edit"
to respect the same options for specifying a notes message without
invoking the editor.
Multiple "-m" and/or "-F" options are concatenated as separate
paragraphs.
The patch also updates the "git notes" documentation and adds
selftests for the new functionality. Unfortunately, the added
selftests include a couple of lines with trailing whitespace
(without these the test will fail). This may cause git to warn
about "whitespace errors".
This patch has been improved by the following contributions:
- Thomas Rast: fix trailing whitespace in t3301
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-notes have the potential of being pretty expensive, so test with
a lot of commits. A lot. So to make things cheaper, you have to
opt-in explicitely, by setting the environment variable
GIT_NOTES_TIMING_TESTS.
This patch has been improved by the following contributions:
- Junio C Hamano: tests: fix "export var=val"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid looking up each and every commit in the notes ref's tree
object, which is very expensive, speed things up by slurping the tree
object's contents into a hash_map.
The idea for the hashmap singleton is from David Reiss, initial
benchmarking by Jeff King.
Note: the implementation allows for arbitrary entries in the notes
tree object, ignoring those that do not reference a valid object. This
allows you to annotate arbitrary branches, or objects.
This patch has been improved by the following contributions:
- Junio C Hamano: fixed an obvious error in initialize_hash_map()
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
This patch has been improved by the following contributions:
- Tor Arne Vestbø: fix printing of multi-line notes
- Michael J Gruber: test and handle empty notes gracefully
- Thomas Rast:
- only clean up message file when editing
- use GIT_EDITOR and core.editor over VISUAL/EDITOR
- t3301: fix confusing quoting in test for valid notes ref
- t3301: use test_must_fail instead of !
- refuse to edit notes outside refs/notes/
- Junio C Hamano: tests: fix "export var=val"
- Christian Couder: documentation: fix 'linkgit' macro in "git-notes.txt"
- Johan Herland: minor cleanup and bugfixing in git-notes.sh (v2)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
This patch has been improved by the following contributions:
- Thomas Rast: fix core.notesRef documentation
- Tor Arne Vestbø: fix printing of multi-line notes
- Alex Riesen: Using char array instead of char pointer costs less BSS
- Johan Herland: Plug leak when msg is good, but msglen or type causes return
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
The newly added function can rewrap text according to a given first-line
indent, other-indent and text width.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
print_wrapped_text() will insert its own newlines. Up until now, if the
text passed to it contained newlines, they would not be handled properly
(the wrapping got confused after that).
The strategy is to replace a single new-line with a space, but keep double
new-lines so that already-wrapped text with empty lines between paragraphs
will be handled properly.
However, single new-line characters are only handled this way if the
character after it is an alphanumeric character, as per Linus' suggestion.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We don't want to use output() on git-commit --amend when rewording the
commit message. This leads to confusion as the editor is run in a
subshell with it's output saved away, leaving the user with a seemingly
frozen terminal.
Fix by removing the output part.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format template string was declared as "const void *" for some unknown
reason, even though it obviously is meant to be passed a string. Make it
"const char *".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the first things that cvsimport does is chdir to the
newly created git repo. This means that any filenames given
to us on the command line will be looked up relative to the
git repo directory. This is probably not what the user
expects, so let's remember and prepend the original
directory for relative filenames.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of the static variable that was used to prevent loading all
the refnames multiple times by moving that code out of describe(),
simply making sure it is only run once that way.
Also change the error message that is shown in case no refnames are
found to not include a hash any more, as the error condition is not
specific to any particular revision.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git push: say that --tag can't be used with --all or --mirror in help text
git push: remove incomplete options list from help text
document push's new quiet option
Makefile: clean block-sha1/ directory instead of mozilla-sha1/
