"git cherry-pick/revert" learned a new "--skip" action.
* ra/cherry-pick-revert-skip:
cherry-pick/revert: advise using --skip
cherry-pick/revert: add --skip option
sequencer: use argv_array in reset_merge
sequencer: rename reset_for_rollback to reset_merge
sequencer: add advice for revert
"git fetch" and "git pull" reports when a fetch results in
non-fast-forward updates to let the user notice unusual situation.
The commands learned "--no-shown-forced-updates" option to disable
this safety feature.
* ds/fetch-disable-force-notice:
pull: add --[no-]show-forced-updates passthrough
fetch: warn about forced updates in branch listing
fetch: add --[no-]show-forced-updates argument
In the case of merge conflicts, while performing a revert, we are
currently advised to use `git cherry-pick --<sequencer-options>`.
Introduce a separate advice message for `git revert`. Also change
the signature of `create_seq_dir` to handle which advice to display
selectively.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --[no-]show-forced-updates option in 'git fetch' can be confusing
for some users, especially if it is enabled via config setting and not
by argument. Add advice to warn the user that the (forced update)
messages were not listed.
Additionally, warn users when the forced update check takes longer
than ten seconds, and recommend that they disable the check. These
messages can be disabled by the advice.fetchShowForcedUpdates config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ahead/behind calculation in 'git status' can be slow in some
cases. Users may not realize that there are ways to avoid this
computation, especially if they are not using the information.
Add a warning that appears if this calculation takes more than
two seconds. The warning can be disabled through the new config
setting advice.statusAheadBehind.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mechanically and systematically drop "extern" from function
declarlation.
* dl/no-extern-in-func-decl:
*.[ch]: manually align parameter lists
*.[ch]: remove extern from function declarations using sed
*.[ch]: remove extern from function declarations using spatch
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Robert Dailey reported confusion on the mailing list about a nested
tag which was most likely created by mistake. Jeff King noted that
this isn't a very common case and creating a tag-to-a-tag can be a
user-error.
Suggest that it may be a mistake with an advice message when
creating such a tag. Those who do want to create a tag that point
at another tag regularly can turn it off with the usual advice
mechanism.
Reported-by: Robert Dailey <rcdailey.lists@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
[jc: fixed test style and tweaked the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an advice to the recently improved error message added in
f8aae12034 ("push: allow unqualified dest refspecs to DWIM",
2008-04-23).
Now with advice.pushUnqualifiedRefName=true (on by default) we show a
hint about how to proceed:
$ ./git-push avar v2.19.0^{commit}:newbranch -n
error: The destination you provided is not a full refname (i.e.,
starting with "refs/"). We tried to guess what you meant by:
- Looking for a ref that matches 'newbranch' on the remote side.
- Checking if the <src> being pushed ('v2.19.0^{commit}')
is a ref in "refs/{heads,tags}/". If so we add a corresponding
refs/{heads,tags}/ prefix on the remote side.
Neither worked, so we gave up. You must fully qualify the ref.
hint: The <src> part of the refspec is a commit object.
hint: Did you mean to create a new branch by pushing to
hint: 'v2.19.0^{commit}:refs/heads/newbranch'?
error: failed to push some refs to 'git@github.com:avar/git.git'
When trying to push a tag, tree or a blob we suggest that perhaps the
user meant to push them to refs/tags/ instead.
The if/else duplication for all of OBJ_{COMMIT,TAG,TREE,BLOB} is
unfortunate, but is required to correctly mark the messages for
translation. See the discussion in
<87r2gxebsi.fsf@evledraar.gmail.com> about that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refresh_index() is done after a reset command as an optimization. Because
it can be an expensive call, warn the user if it takes more than 2 seconds
and tell them how to avoid it using the --quiet command line option or
reset.quiet config setting.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" and "git worktree add" learned to honor
checkout.defaultRemote when auto-vivifying a local branch out of a
remote tracking branch in a repository with multiple remotes that
have tracking branches that share the same names.
* ab/checkout-default-remote:
checkout & worktree: introduce checkout.defaultRemote
checkout: add advice for ambiguous "checkout <branch>"
builtin/checkout.c: use "ret" variable for return
checkout: pass the "num_matches" up to callers
checkout.c: change "unique" member to "num_matches"
checkout.c: introduce an *_INIT macro
checkout.h: wrap the arguments to unique_tracking_name()
checkout tests: index should be clean after dwim checkout
As the "checkout" documentation describes:
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat
as equivalent to [...] <remote>/<branch.
This is a really useful feature. The problem is that when you add
another remote (e.g. a fork), git won't find a unique branch name
anymore, and will instead print this unhelpful message:
$ git checkout master
error: pathspec 'master' did not match any file(s) known to git
Now it will, on my git.git checkout, print:
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
Note that the "error: pathspec[...]" message is still printed. This is
because whatever else checkout may have tried earlier, its final
fallback is to try to resolve the argument as a path. E.g. in this
case:
$ ./git --exec-path=$PWD checkout master pu
error: pathspec 'master' did not match any file(s) known to git.
error: pathspec 'pu' did not match any file(s) known to git.
There we don't print the "hint:" implicitly due to earlier logic
around the DWIM fallback. That fallback is only used if it looks like
we have one argument that might be a branch.
I can't think of an intrinsic reason for why we couldn't in some
future change skip printing the "error: pathspec[...]" error. However,
to do so we'd need to pass something down to checkout_paths() to make
it suppress printing an error on its own, and for us to be confident
that we're not silencing cases where those errors are meaningful.
I don't think that's worth it since determining whether that's the
case could easily change due to future changes in the checkout logic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only benefit from this move (apart from cleaner code) is that
advice.amWorkDir should now show up in `git help --config`. There
should be no regression since advice config is always read by the
git_default_config().
While at there, use advise() like other code. We now get "hint: "
prefix and the output is stderr instead of stdout (which is also the
reason for the test update because stderr is checked in a following
test and the extra advice can fail it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grafts feature was a convenient way to "stitch together" ancient
history to the fresh start of linux.git.
Its implementation is, however, not up to Git's standards, as there are
too many ways where it can lead to surprising and unwelcome behavior.
For example, when pushing from a repository with active grafts, it is
possible to miss commits that have been "grafted out", resulting in a
broken state on the other side.
Also, the grafts feature is limited to "rewriting" commits' list of
parents, it cannot replace anything else.
The much younger feature implemented as `git replace` set out to remedy
those limitations and dangerous bugs.
Seeing as `git replace` is pretty mature by now (since 4228e8bc98
(replace: add --graft option, 2014-07-19) it can perform the graft
file's duties), it is time to deprecate support for the graft file, and
to retire it eventually.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git shows a message to tell the user that it is waiting for the
user to finish editing when spawning an editor, in case the editor
opens to a hidden window or somewhere obscure and the user gets
lost.
* ls/editor-waiting-message:
launch_editor(): indicate that Git waits for user input
refactor "dumb" terminal determination
When a graphical GIT_EDITOR is spawned by a Git command that opens
and waits for user input (e.g. "git rebase -i"), then the editor window
might be obscured by other windows. The user might be left staring at
the original Git terminal window without even realizing that s/he needs
to interact with another window before Git can proceed. To this user Git
appears hanging.
Print a message that Git is waiting for editor input in the original
terminal and get rid of it when the editor returns, if the terminal
supports erasing the last line. Also, make sure that our message is
terminated with a whitespace so that any message the editor may show
upon starting up will be kept separate from our message.
Power users might not want to see this message or their editor might
already print such a message (e.g. emacsclient). Allow these users to
suppress the message by disabling the "advice.waitingForEditor" config.
The standard advise() function is not used here as it would always add
a newline which would make deleting the message harder.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an easy mistake to add a repository inside another
repository, like:
git clone $url
git add .
The resulting entry is a gitlink, but there's no matching
.gitmodules entry. Trying to use "submodule init" (or clone
with --recursive) doesn't do anything useful. Prior to
v2.13, such an entry caused git-submodule to barf entirely.
In v2.13, the entry is considered "inactive" and quietly
ignored. Either way, no clone of your repository can do
anything useful with the gitlink without the user manually
adding the submodule config.
In most cases, the user probably meant to either add a real
submodule, or they forgot to put the embedded repository in
their .gitignore file.
Let's issue a warning when we see this case. There are a few
things to note:
- the warning will go in the git-add porcelain; anybody
wanting to do low-level manipulation of the index is
welcome to create whatever funny states they want.
- we detect the case by looking for a newly added gitlink;
updates via "git add submodule" are perfectly reasonable,
and this avoids us having to investigate .gitmodules
entirely
- there's a command-line option to suppress the warning.
This is needed for git-submodule itself (which adds the
entry before adding any submodule config), but also
provides a mechanism for other scripts doing
submodule-like things.
We could make this a hard error instead of a warning.
However, we do add lots of sub-repos in our test suite. It's
not _wrong_ to do so. It just creates a state where users
may be surprised. Pointing them in the right direction with
a gentle hint is probably the best option.
There is a config knob that can disable the (long) hint. But
I intentionally omitted a config knob to disable the warning
entirely. Whether the warning is sensible or not is
generally about context, not about the user's preferences.
If there's a tool or workflow that adds gitlinks without
matching .gitmodules, it should probably be taught about the
new command-line option, rather than blanket-disabling the
warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d38a30d (Be more user-friendly when refusing to do something
because of conflict., 2010-01-12), git-pull will error out with
user-friendly advices if the user is in the middle of a merge or has
unmerged files.
Re-implement this behavior. While the "has unmerged files" case can be
handled by die_resolve_conflict(), we introduce a new function
die_conclude_merge() for printing a different error message for when
there are no unmerged files but the merge has not been finished.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the function attributes extension to catch mistakes in use of
our own variadic functions that use NULL sentinel at the end
(i.e. like execl(3)) and format strings (i.e. like printf(3)).
* jk/gcc-function-attributes:
Add the LAST_ARG_MUST_BE_NULL macro
wt-status: use "format" function attribute for status_printf
use "sentinel" function attribute for variadic lists
add missing "format" function attributes
For most of our functions that take printf-like formats, we
use gcc's __attribute__((format)) to get compiler warnings
when the functions are misused. Let's give a few more
functions the same protection.
In most cases, the annotations do not uncover any actual
bugs; the only code change needed is that we passed a size_t
to transfer_debug, which expected an int. Since we expect
the passed-in value to be a relatively small buffer size
(and cast a similar value to int directly below), we can
just cast away the problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a single message followed by list of paths from "git rm" to
report multiple paths that cannot be removed.
* mm/rm-coalesce-errors:
rm: introduce advice.rmHints to shorten messages
rm: better error message on failure for multiple files
We promised to change the behaviour of lazy "git push [there]" that
does not say what to push on the command line from "matching" to
"simple" in Git 2.0.
This finally flips that bit.
Helped-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.rmHints to choose whether to display advice or not
when git rm fails. Defaults to true, in order to preserve current behavior.
As an example, the message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would look like, with advice.rmHints=false:
error: 'foo.txt' has changes staged in the index
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd <name>", when <name> happens to be a 40-hex string,
directly uses the 40-hex string as an object name, even if a ref
"refs/<some hierarchy>/<name>" exists. This disambiguation order
is unlikely to change, but we should warn about the ambiguity just
like we warn when more than one refs/ hierachies share the same
name.
* nd/warn-ambiguous-object-name:
get_sha1: warn about full or short object names that look like refs
When we get 40 hex digits, we immediately assume it's an SHA-1. This
is the right thing to do because we have no way else to specify an
object. If there is a ref with the same object name, it will be
ignored. Warn the user about this case because the ref with full
object name is likely a mistake, for example
git checkout -b $empty_var $(git rev-parse something)
advice.object_name_warning is not documented because frankly people
should not be aware about it until they encounter this situation.
While at there, warn about ambiguation with abbreviated SHA-1 too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user requests to --set-upstream-to a branch that does
not exist, then either:
1. It was a typo.
2. They thought the branch should exist.
In case (1), there is not much we can do beyond showing the
name we tried to use. For case (2), though, we can help to
guide them through common workflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'advice.pushAlreadyExists' option to disable the advice shown when
an update is rejected for a reference that is not allowed to update at
all (verses those that are allowed to fast-forward.)
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pushNonFastForward' advice config can be used to squelch several
instances of push-related advice. Rename it to 'pushUpdateRejected' to
cover other reject scenarios that are unrelated to fast-forwarding.
Retain the old name for compatibility.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable future callers to report a conflict and not die immediately by
introducing a new function called error_resolve_conflict.
Re-implement die_resolve_conflict as a call to error_resolve_conflict
followed by a call to die. Consequently, the message printed by
die_resolve_conflict changes from
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree ...
...
to
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree ...
hint: ...
fatal: Exiting because of an unresolved conflict.
Hints are printed using the same advise function introduced in
v1.7.3-rc0~26^2~3 (Introduce advise() to print hints, 2010-08-11).
Inspired-by: Christian Couder <chistian.couder@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old "advice" message explained how to create a branch after going into
a detached HEAD state but didn't make it clear why the user may want to do
so. Also "moving to ... which isn't a local branch" was unclear if it is
complaining, if it is describing the new state, or if it is explaining why
the HEAD is detached (the true reason is the last one).
Give the established phrase 'detached HEAD' first to make it easy for
users to look up the concept in documentation, and briefly describe what
can be done in the state (i.e. play around without having to clean up)
before telling the user how to keep what was done during the temporary
state.
Allow the long description to be hidden by setting advice.detachedHead
configuration to false.
We might want to customize the advice depending on how the commit to check
out was spelled (e.g. instead of "new-branch-name", we way want to say
"topic" when "git checkout origin/topic" triggered this message) in later
updates, but this encapsulates that into a separate function and it should
be a good first step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We now nag the user with a giant warning when their identity
was pulled from the username, hostname, and gecos
information, in case it is not correct. Most users will
suppress this by simply setting up their information
correctly.
However, there may be some users who consciously want to use
that information, because having the value change from host
to host contains useful information. These users can now set
advice.implicitidentity to false to suppress the message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various commands refuse to run in the presence of conflicts (commit,
merge, pull, cherry-pick/revert). They all used to provide rough, and
inconsistant error messages.
A new variable advice.resolveconflict is introduced, and allows more
verbose messages, pointing the user to the appropriate solution.
For commit, the error message used to look like this:
$ git commit
foo.txt: needs merge
foo.txt: unmerged (c34a92682e0394bc0d6f4d4a67a8e2d32395c169)
foo.txt: unmerged (3afcd75de8de0bb5076942fcb17446be50451030)
foo.txt: unmerged (c9785d77b76dfe4fb038bf927ee518f6ae45ede4)
error: Error building trees
The "need merge" line is given by refresh_cache. We add the IN_PORCELAIN
option to make the output more consistant with the other porcelain
commands, and catch the error in return, to stop with a clean error
message. The next lines were displayed by a call to cache_tree_update(),
which is not reached anymore if we noticed the conflict.
The new output looks like:
U foo.txt
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree, and then use 'git add/rm <file>' as
appropriate to mark resolution and make a commit, or use 'git commit -a'.
Pull is slightly modified to abort immediately if $GIT_DIR/MERGE_HEAD
exists instead of waiting for merge to complain.
The behavior of merge and the test-case are slightly modified to reflect
the usual flow: start with conflicts, fix them, and afterwards get rid of
MERGE_HEAD, with different error messages at each stage.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-before-pull is well accepted in the DVCS community, but is
confusing some new users. This should get them back in the right way when
the problem occurs.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages are nice for new users, but experienced git
users know how to manipulate the index, and these messages
waste a lot of screen real estate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
