Show header, help, error messages, and prompt in colors for interactive
git-clean. Re-use config variables, such as "color.interactive" and
"color.interactive.<slot>" for command `git-add--interactive`.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Comments-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are lots of items to be cleaned, it is hard to see them all
in one screen. Show them in columns will solve this problem.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Comments-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration option column.ui is very poorly documented, and it is
unclear what the defaults are, and what option can be combined with
what. Rewrite it by splitting up the options into three sections
clearly showing how COL_ENABLED, COL_LAYOUT_MASK, and COL_DENSE work.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a single message followed by list of paths from "git rm" to
report multiple paths that cannot be removed.
* mm/rm-coalesce-errors:
rm: introduce advice.rmHints to shorten messages
rm: better error message on failure for multiple files
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always run 'git status -s'.
The configuration variable status.short allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When remote.pushdefault or branch.<name>.pushremote is set to a
remote that is different from where you usually fetch from (i.e. a
triangular workflow), master@{u} != origin, and push.default is set
to `upstream` or `simple` would fail with this error:
$ git push
fatal: You are pushing to remote 'origin', which is not the upstream of
your current branch 'master', without telling me what to push
to update which remote branch.
The very name of "upstream" indicates that it is only suitable for
use in central workflows; let us not even attempt to give it a new
meaning in triangular workflows, and error out as before.
However, the `simple` does not have to share this error. It is
poised to be the default for Git 2.0, and we would like it to do
something sensible in triangular workflows.
Redefine "simple" as "safer upstream" for centralized workflow as
before, but work as "current" for triangular workflow.
We may want to make it "safer current", but that is a separate
issue.
Reported-by: Leandro Lucarella <leandro.lucarella@sociomantic.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 1a22bd31f0, reversing
changes made to 3e7a5b489e.
It makes it impossible to "git commit" when status.short is set, and
also "git status --porcelain" output is affected by status.branch.
4d35924e (Merge branch 'rr/triangle', 2013-04-07) introduced support
for triangular workflows, but the push.default values still assume
central workflows.
Rewrite the descriptions of `nothing`, `current`, `upstream` and
`matching` for greater clarity, and explicitly explain how they
should behave in triangular workflows.
Leave `simple` as it is for the moment, as we plan to change its
meaning to accommodate triangular workflows in a later patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Flip the default for color.ui to 'auto', which is what many
tutorials recommend new users to do.
* mm/color-auto-default:
make color.ui default to 'auto'
config: refactor management of color.ui's default value
We promised to change the behaviour of lazy "git push [there]" that
does not say what to push on the command line from "matching" to
"simple" in Git 2.0.
This finally flips that bit.
Helped-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.rmHints to choose whether to display advice or not
when git rm fails. Defaults to true, in order to preserve current behavior.
As an example, the message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would look like, with advice.rmHints=false:
error: 'foo.txt' has changes staged in the index
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always run 'git status -s'.
The configuration variable status.short allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most users seem to like having colors enabled, and colors can help
beginners to understand the output of some commands (e.g. notice
immediately the boundary between commits in the output of "git log").
Many tutorials tell the users to set color.ui=auto as a very first step,
which tend to indicate that color.ui=none is not the recommanded value,
hence should not be the default.
These tutorials would benefit from skipping this step and starting the
real Git manipulations earlier. Other beginners do not know about
color.ui=auto, and may not discover it by themselves, hence live with
black&white outputs while they may have preferred colors.
A few people (e.g. color-blind) prefer having no colors, but they can
easily set color.ui=never for this (and googling "disable colors in git"
already tells them how to do so), but this needs not occupy space in
beginner-oriented documentations.
A transition period with Git emitting a warning when color.ui is unset
would be possible, but the discomfort of having the warning seems
superior to the benefit: users may be surprised by the change, but not
harmed by it.
The default value is changed, and the documentation is reworded to
mention "color.ui=false" first, since the primary use of color.ui after
this change is to disable colors, not to enable it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new feature allows a rebase to be executed on a dirty worktree or
index. It works by creating a temporary "dangling merge commit" out
of the worktree and index changes (via 'git stash create'), and
automatically applying it after a successful rebase or abort.
rebase stores the SHA-1 hex of the temporary merge commit, along with
the rest of the rebase state, in either
.git/{rebase-merge,rebase-apply}/autostash depending on the kind of
rebase. Since $state_dir is automatically removed at the end of a
successful rebase or abort, so is the autostash.
The advantage of this approach is that we do not affect the normal
stash's reflogs, making the autostash invisible to the end-user. This
means that you can use 'git stash' during a rebase as usual.
When the autostash application results in a conflict, we push
$state_dir/autostash onto the normal stash and remove $state_dir
ending the rebase. The user can inspect the stash, and pop or drop at
any time.
Most significantly, this feature means that a caller like pull (with
pull.rebase set to true) can easily be patched to remove the
require_clean_work_tree restriction.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ta/glossary:
glossary: improve definitions of refspec and pathspec
The name of the hash function is "SHA-1", not "SHA1"
glossary: improve description of SHA-1 related topics
glossary: remove outdated/misleading/irrelevant entries
Allows format-patch --cover-letter to be configurable; the most
notable is the "auto" mode to create cover-letter only for multi
patch series.
* fc/send-email-annotate:
rebase-am: explicitly disable cover-letter
format-patch: trivial cleanups
format-patch: add format.coverLetter configuration variable
log: update to OPT_BOOL
format-patch: refactor branch name calculation
format-patch: improve head calculation for cover-letter
send-email: make annotate configurable
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise when using 'git branch -vv' it's hard to see them among so
much output.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a boolean http.sslTry option which allows to enable AUTH SSL/TLS and
encrypted data transfers when connecting via regular FTP protocol.
Default is false since it might trigger certificate verification errors on
misconfigured servers.
Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, add a new option: 'auto', so if there's more than one patch, the
cover letter is generated, otherwise it's not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always do --annotate, lets not force them to always type
that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable overrides `remote.pushdefault` and
`branch.<name>.remote` for pushes. When you pull from one
place (e.g. your upstream) and push to another place (e.g. your own
publishing repository), you would want to set `remote.pushdefault` to
specify the remote to push to for all branches, and use this option to
override it for a specific branch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable defines the default remote to push to,
and overrides `branch.<name>.remote` for all branches. It is useful
in the typical triangular-workflow setup, where the remote you're
fetching from is different from the remote you're pushing to.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
"insn" appears to be an in-code abbreviation and should not appear
in manual/help pages.
Signed-off-by: Matthias Krüger <matthias.krueger@famsik.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows requests to fetch objects at any tip of refs (including
hidden ones). It seems that there may be use cases even outside
Gerrit (e.g. $gmane/215701).
* jc/fetch-raw-sha1:
fetch: fetch objects by their exact SHA-1 object names
upload-pack: optionally allow fetching from the tips of hidden refs
fetch: use struct ref to represent refs to be fetched
parse_fetch_refspec(): clarify the codeflow a bit
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Advice" is a mass noun, not a count noun; it's not ordinarily
pluralized.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of references still survive to .git/refs as a tree
of all refs. Fix one in docs, one in a -h message, one in
a -h message quoted in docs.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped mentioning `tracking` is a deprecated but supported
synonym for `upstream` in pull.default even though we have no
intention of removing the support for it.
* jc/mention-tracking-for-pull-default:
doc: mention tracking for pull.default
Allow the server side to redact the refs/ namespace it shows to the
client.
Will merge to 'master'.
* jc/hidden-refs:
upload/receive-pack: allow hiding ref hierarchies
upload-pack: simplify request validation
upload-pack: share more code
With uploadpack.allowtipsha1inwant configuration option set, future
versions of "git fetch" that allow an exact object name (likely to
have been obtained out of band) on the LHS of the fetch refspec can
make a request with a "want" line that names an object that may not
have been advertised due to transfer.hiderefs configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repository may have refs that are only used for its internal
bookkeeping purposes that should not be exposed to the others that
come over the network.
Teach upload-pack to omit some refs from its initial advertisement
by paying attention to the uploadpack.hiderefs multi-valued
configuration variable. Do the same to receive-pack via the
receive.hiderefs variable. As a convenient short-hand, allow using
transfer.hiderefs to set the value to both of these variables.
Any ref that is under the hierarchies listed on the value of these
variable is excluded from responses to requests made by "ls-remote",
"fetch", etc. (for upload-pack) and "push" (for receive-pack).
Because these hidden refs do not count as OUR_REF, an attempt to
fetch objects at the tip of them will be rejected, and because these
refs do not get advertised, "git push :" will not see local branches
that have the same name as them as "matching" ones to be sent.
An attempt to update/delete these hidden refs with an explicit
refspec, e.g. "git push origin :refs/hidden/22", is rejected. This
is not a new restriction. To the pusher, it would appear that there
is no such ref, so its push request will conclude with "Now that I
sent you all the data, it is time for you to update the refs. I saw
that the ref did not exist when I started pushing, and I want the
result to point at this commit". The receiving end will apply the
compare-and-swap rule to this request and rejects the push with
"Well, your update request conflicts with somebody else; I see there
is such a ref.", which is the right thing to do. Otherwise a push to
a hidden ref will always be "the last one wins", which is not a good
default.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation to change "GIT" which was a poor-man's small
caps to "Git". The latter was the intended spelling.
Also change "git" spelled in all-lowercase to "Git" when it refers
to the system as the whole or the concept it embodies, as opposed to
the command the end users would type.
* ta/doc-no-small-caps:
Documentation: StGit is the right spelling, not StGIT
Documentation: describe the "repository" in repository-layout
Documentation: add a description for 'gitfile' to glossary
Documentation: do not use undefined terms git-dir and git-file
Documentation: the name of the system is 'Git', not 'git'
Documentation: avoid poor-man's small caps GIT
Improve error and advice messages given locally when "git push"
refuses when it cannot compute fast-forwardness by separating these
cases from the normal "not a fast-forward; merge first and push
again" case.
* jc/push-reject-reasons:
push: finishing touches to explain REJECT_ALREADY_EXISTS better
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
push: further simplify the logic to assign rejection reason
push: further clean up fields of "struct ref"
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
When looking at a configuration file edited long time ago, a user
may find 'pull.default = tracking' and wonder what it means, but
earlier we stopped mentioning this value, even though the code still
support it and more importantly, we have no intention to force old
timers to update their configuration files.
Instead of not mentioning it, add it to the description in a way
that makes it clear that users have no reason to add new uses of it
preferring over 'upstream', by not listing it as a separate item on
the same footing as other values but as a deprecated synonym of the
'upstream' in its description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration variable to set default clean-up mode other
than "strip".
* rt/commit-cleanup-config:
commit: make default of "cleanup" option configurable
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "log.mailmap" configuration variable to turn "--use-mailmap"
option on to "git log", "git show" and "git whatchanged".
The "--no-use-mailmap" option from the command line can countermand
the setting.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of the "cleanup" option in "git commit"
is not configurable. Users who don't want to use the
default have to pass this option on every commit since
there's no way to configure it. This commit introduces
a new config option "commit.cleanup" which can be used
to change the default of the "cleanup" option in
"git commit".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
The beginning of 'integrate with the tip of the remote branch, not
the commit recorded in the superproject gitlink' support.
* wk/submodule-update-remote:
submodule add: If --branch is given, record it in .gitmodules
submodule update: add --remote for submodule's upstream changes
submodule: add get_submodule_config helper funtion
Allow us to read, and default to read, mailmap files from the tip
of the history in bare repositories. This will help running tools
like shortlog in server settings.
* jk/mailmap-from-blob:
mailmap: default mailmap.blob in bare repositories
mailmap: fix some documentation loose-ends for mailmap.blob
mailmap: clean up read_mailmap error handling
mailmap: support reading mailmap from blobs
mailmap: refactor mailmap parsing for non-file sources
Require "-f" for push to update a tag, even if it is a fast-forward.
* cr/push-force-tag-update:
push: allow already-exists advice to be disabled
push: rename config variable for more general use
push: cleanup push rules comment
push: clarify rejection of update to non-commit-ish
push: require force for annotated tags
push: require force for refs under refs/tags/
push: flag updates that require force
push: keep track of "update" state separately
push: add advice for rejected tag reference
push: return reject reasons as a bitset
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current `update` command incorporates the superproject's gitlinked
SHA-1 ($sha1) into the submodule HEAD ($subsha1). Depending on the
options you use, it may checkout $sha1, rebase the $subsha1 onto
$sha1, or merge $sha1 into $subsha1. This helps you keep up with
changes in the upstream superproject.
However, it's also useful to stay up to date with changes in the
upstream subproject. Previous workflows for incorporating such
changes include the ungainly:
$ git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
With this patch, all of the useful functionality for incorporating
superproject changes can be reused to incorporate upstream subproject
updates. When you specify --remote, the target $sha1 is replaced with
a $sha1 of the submodule's origin/master tracking branch. If you want
to merge a different tracking branch, you can configure the
`submodule.<name>.branch` option in `.gitmodules`. You can override
the `.gitmodules` configuration setting for a particular superproject
by configuring the option in that superproject's default configuration
(using the usual configuration hierarchy, e.g. `.git/config`,
`~/.gitconfig`, etc.).
Previous use of submodule.<name>.branch
=======================================
Because we're adding a new configuration option, it's a good idea to
check if anyone else is already using the option. The foreach-pull
example above was described by Ævar in
commit f030c96d86
Author: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Fri May 21 16:10:10 2010 +0000
git-submodule foreach: Add $toplevel variable
Gerrit uses the same interpretation for the setting, but because
Gerrit has direct access to the subproject repositories, it updates
the superproject repositories automatically when a subproject changes.
Gerrit also accepts the special value '.', which it expands into the
superproject's branch name.
Although the --remote functionality is using `submodule.<name>.branch`
slightly differently, the effect is the same. The foreach-pull
example uses the option to record the name of the local branch to
checkout before pulls. The tracking branch to be pulled is recorded
in `.git/modules/<name>/config`, which was initialized by the module
clone during `submodule add` or `submodule init`. Because the branch
name stored in `submodule.<name>.branch` was likely the same as the
branch name used during the initial `submodule add`, the same branch
will be pulled in each workflow.
Implementation details
======================
In order to ensure a current tracking branch state, `update --remote`
fetches the submodule's remote repository before calculating the
SHA-1. However, I didn't change the logic guarding the existing fetch:
if test -z "$nofetch"
then
# Run fetch only if $sha1 isn't present or it
# is not reachable from a ref.
(clear_local_git_env; cd "$path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
die "$(eval_gettext "Unable to fetch in submodule path '\$path'")"
fi
There will not be a double-fetch, because the new $sha1 determined
after the `--remote` triggered fetch should always exist in the
repository. If it doesn't, it's because some racy process removed it
from the submodule's repository and we *should* be re-fetching.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation for mailmap.blob is to let users of bare
repositories use the mailmap feature, as they would not have
a checkout containing the .mailmap file. We can make it even
easier for them by just looking in HEAD:.mailmap by default.
We can't know for sure that this is where they would keep a
mailmap, of course, but it is the best guess (and it matches
the non-bare behavior, which reads from HEAD:.mailmap in the
working tree). If it's missing, git will silently ignore the
setting.
We do not do the same magic in the non-bare case, because:
1. In the common case, HEAD:.mailmap will be the same as
the .mailmap in the working tree, which is a no-op.
2. In the uncommon case, the user has modified .mailmap
but not yet committed it, and would expect the working
tree version to take precedence.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bare repository, there isn't a simple way to respect an
in-tree mailmap without extracting it to a temporary file.
This patch provides a config variable, similar to
mailmap.file, which reads the mailmap from a blob in the
repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'advice.pushAlreadyExists' option to disable the advice shown when
an update is rejected for a reference that is not allowed to update at
all (verses those that are allowed to fast-forward.)
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pushNonFastForward' advice config can be used to squelch several
instances of push-related advice. Rename it to 'pushUpdateRejected' to
cover other reject scenarios that are unrelated to fast-forwarding.
Retain the old name for compatibility.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can override an option set in the LESS variable by simply prefixing
the command line option with `-+`. This is more robust than the previous
example if the default LESS options are to ever change.
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Jeff King <peff@peff.net>
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
Update the documentation of the core.whitespace option
"indent-with-non-tab" to correctly reflect that it catches the use of
spaces instead of the equivalent tabs, rather than a fixed number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"grep" learned to use a non-standard pattern type by default if a
configuration variable tells it to.
* js/grep-patterntype-config:
grep: add a grep.patternType configuration setting
The grep.extendedRegexp configuration setting enables the -E flag on grep
by default but there are no equivalents for the -G, -F and -P flags.
Rather than adding an additional setting for grep.fooRegexp for current
and future pattern matching options, add a grep.patternType setting that
can accept appropriate values for modifying the default grep pattern
matching behavior. The current values are "basic", "extended", "fixed",
"perl" and "default" for setting -G, -E, -F, -P and the default behavior
respectively.
When grep.patternType is set to a value other than "default", the
grep.extendedRegexp setting is ignored. The value of "default" restores
the current default behavior, including the grep.extendedRegexp
behavior.
Signed-off-by: J Smith <dark.panda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
If "git am" fails to apply something, the end user may need to know
where to find the patch that failed to apply, so that the user can
do other things (e.g. trying "GNU patch" on it, running "diffstat"
to see what it tried to change, etc.) The input to "am" may have
contained more than one patch, or the message may have been MIME
encoded, and knowing what the user fed to "am" does not help very
much for this purpose.
Also introduce advice.amworkdir configuration to allow people who
learned where to look to squelch this message.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
Teach git to read various information from $XDG_CONFIG_HOME/git/ to allow
the user to avoid cluttering $HOME.
* mm/config-xdg:
config: write to $XDG_CONFIG_HOME/git/config file when appropriate
Let core.attributesfile default to $XDG_CONFIG_HOME/git/attributes
Let core.excludesfile default to $XDG_CONFIG_HOME/git/ignore
config: read (but not write) from $XDG_CONFIG_HOME/git/config file
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes two formatting bugs in the git-config documentation:
- in the column.ui entry don't indent the last paragraph so that it isn't
formatted as a literal paragraph
- in the push.default entry separate the last paragraph from the
nested list.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This gives the default value for the core.attributesfile variable
following the exact same logic of the previous change for the
core.excludesfile setting.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To use the feature of core.excludesfile, the user needs:
1. to create such a file,
2. and add configuration variable to point at it.
Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.
And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config). The use of this
directory is in line with XDG specification as a location to store
such application specific files.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides new informative help messages in the display of
'git status' (at the top) during conflicts, rebase, am, bisect or
cherry-pick process.
The new messages are not shown when using options such as -s or
--porcelain. The messages about the current situation of the user are
always displayed but the advices on what the user needs to do in order
to resume a rebase/bisect/am/commit after resolving conflicts can be
hidden by setting advice.statushints to 'false' in the config file.
Thus, information about the updated advice.statushints key are added
in Documentation/config.txt.
Also, the test t7060-wt-status.sh is now working with the new help
messages. Tests about suggestions of "git rm" are also added.
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
Since commit 6cf378f, asciidoc backticks are now inline
literals; therefore quoting {tilde} inside them is wrong
(this instance was missed in 6cf378f because it happened on
a parallel line of development).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation was written for an ancient version of AsciiDoc,
making the source not very readable.
By Jeff King
* jk/doc-asciidoc-inline-literal:
docs: stop using asciidoc no-inline-literal
New users tend to work on one branch at a time and push the result
out. The current and upstream modes of push is a more suitable default
mode than matching mode for these people, but neither is surprise-free
depending on how the project is set up. Introduce a "simple" mode that
is a subset of "upstream" but only works when the branch is named the same
between the remote and local repositories.
The plan is to make it the new default when push.default is not
configured.
By Matthieu Moy (5) and others
* mm/simple-push:
push.default doc: explain simple after upstream
push: document the future default change for push.default (matching -> simple)
t5570: use explicit push refspec
push: introduce new push.default mode "simple"
t5528-push-default.sh: add helper functions
Undocument deprecated alias 'push.default=tracking'
Documentation: explain push.default option a bit more
The new "include.path" directive in the configuration files learned
to understand "~/path" and "~user/path".
By Jeff King
* mm/include-userpath:
config: expand tildes in include.path variable
You can already use relative paths in include.path, which
means that including "foo" from your global "~/.gitconfig"
will look in your home directory. However, you might want to
do something clever like putting "~/.gitconfig-foo" in a
specific repository's config file.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally all cells (and in turn columns) share the same width. This
layout mode can waste space because one long item can stretch our all
columns.
With COL_DENSE enabled, column width is calculated indepdendently. All
columns are shrunk to minimum, then it attempts to push cells of the
last row over to the next column with hope that everything still fits
even there's one row less. The process is repeated until the new layout
cannot fit in given width any more, or there's only one row left
(perfect!).
Apparently, this mode consumes more cpu than the old one, but it makes
better use of terminal space. For layouting one or two screens, cpu
usage should not be detectable.
This patch introduces option handling code besides layout modes and
enable/disable to expose this feature as "dense". The feature can be
turned off by specifying "nodense".
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
COL_COLUMN and COL_ROW fill column by column (or row by row
respectively), given the terminal width and how many space between
columns. All cells have equal width.
Strings are supposed to be in UTF-8. Valid ANSI escape strings are OK.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A column option string consists of many token separated by either
a space or a comma. A token belongs to one of three groups:
- enabling: always, never and auto
- layout mode: currently plain (which does not layout at all)
- other future tuning flags
git-column can be used to pipe output to from a command that wants
column layout, but not to mess with its own output code. Simpler output
code can be changed to use column layout code directly.
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "simple" mode is described in terms of what "upstream" does,
swap the order of these two entries so that the reader sees "upstream"
first and then reads "simple" with the knowledge of what "upstream"
does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is too early to start warning loudly about the future default change
in favor of 'simple', since many users use different versions of Git, and
would be harmed if we advised them to explicitely set
'push.default=simple' when using old versions of Git.
Still, we want to document the upcomming change so that:
* Users who may be affected by the change get one more chance to know it
in advance.
* We actually commit to changing the default, and avoid repeating past
errors.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's been deprecated since 53c4031 (Johan Herland, Wed Feb 16 2011,
push.default: Rename 'tracking' to 'upstream'), so it's OK to remove it
from documentation (even though it's still supported) to make the
explanations more readable.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous documentation was explaining _what_ the options were doing,
but were of little help explaining _why_ a user should set his default to
either of the options.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
The current wording of the http.proxy documentation suggests that
http_proxy is somehow equivalent to http.proxy. However, while
http.proxy (by the means of curl's CURLOPT_PROXY option) overrides the
proxy for both HTTP and HTTPS protocols, the http_proxy environment
variable is used only for HTTP. But since the docs mention only
http_proxy, a user might expect it to apply to all HTTP-like protocols.
Avoid any such misunderstanding by explicitly mentioning https_proxy and
all_proxy as well.
Also replace linkgit:curl[1] with a literal 'curl(1)', because the
former gets translated to a dead link in the HTML pages.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Variable names must start with an alphabetic character, regexp config key
matching has its limits, sentence grammar.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of rerere.enabled left the user in the dark as to who
might create an rr-cache directory. Add a note that simply invoking
rerere does this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
The wording seems to suggest that creating the directory is needed and the
setting of rerere.enabled is only for disabling the feature by setting it
to 'false'. But the configuration is meant to be the primary control and
setting it to 'true' will enable it; the rr-cache directory will be
created as necessary and the user does not have to create it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/credentials:
t: add test harness for external credential helpers
credentials: add "store" helper
strbuf: add strbuf_add*_urlencode
Makefile: unix sockets may not available on some platforms
credentials: add "cache" helper
docs: end-user documentation for the credential subsystem
credential: make relevance of http path configurable
credential: add credential.*.username
credential: apply helper config
http: use credential API to get passwords
credential: add function for parsing url components
introduce credentials API
t5550: fix typo
test-lib: add test_config_global variant
Conflicts:
strbuf.c
By definition, the default value of "advice.*" variables must be true and
they all control various additional help messages that are designed to aid
new users. Setting one to false is to tell Git that the user understands
the nature of the error and does not need the additional verbose help
message.
Also fix the asciidoc markup for linkgit:git-checkout[1] in the
description of the detachedHead advice by removing an excess colon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The credential API and helper format is already defined in
technical/api-credentials.txt. This presents the end-user
view.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we either need to set branch.<name>.rebase for existing
branches if we'd like "git pull" to mean "git pull --rebase", or have
the forethought of setting "branch.autosetuprebase" before we create
the branch.
Introduce a "pull.rebase" option to globally configure "git pull" to
mean "git pull --rebase" for any branch.
This option will be considered at a lower priority than
branch.<name>.rebase, i.e. we could set pull.rebase=true and
branch.<name>.rebase=false and the latter configuration option would
win.
Reviewed-by: Sverre Rabbelier <srabbelier@gmail.com>
Reviewed-by: Fernando Vezzosi <buccia@repnz.net>
Reviewed-by: Eric Herman <eric@freesa.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.7.6:
make the sample pre-commit hook script reject names with newlines, too
git-read-tree.txt: update sparse checkout examples
git-read-tree.txt: correct sparse-checkout and skip-worktree description
git-read-tree.txt: language and typography fixes
unpack-trees: print "Aborting" to stderr
Documentation/git-update-index: refer to 'ls-files'
Documentation: basic configuration of notes.rewriteRef
* jn/gitweb-manpages:
gitweb: Add gitweb manpages to 'gitweb' package in git.spec
Documentation: Add gitweb config variables to git-config(1)
Documentation: Link to gitweb(1) and gitweb.conf(5) in other manpages
gitweb: Add gitweb(1) manpage for gitweb itself
gitweb: Add gitweb.conf(5) manpage for gitweb configuration files
The insn sheet used by "rebase -i" is designed to be easily editable by
any text editor, but an editor that is specifically meant for it (but
is otherwise unsuitable for editing regular text files) could be useful
by allowing drag & drop reordering in a GUI environment, for example.
The GIT_SEQUENCE_EDITOR environment variable and/or the sequence.editor
configuration variable can be used to specify such an editor, while
allowing the usual editor to be used to edit commit log messages. As
usual, the environment variable takes precedence over the configuration
variable.
It is envisioned that other "sequencer" based tools will use the same
mechanism.
Signed-off-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a list of gitweb config variables to git-config(1) manpage, just
linking to gitweb(1) or gitweb.conf(5).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the [section.subsection] syntax, the subsection is transformed
to lower-case and is matched case sensitively. Say so in the
documentation and mention that you shouldn't be using it anyway.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git term is 'working tree', so replace the most public references
to 'working copy'.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users had problems finding a working setting for notes.rewriteRef.
Document how to enable rewriting for notes/commits, which should be a
safe setting.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This single variable can be used to set instead of setting fsckobjects
variable for fetch & receive independently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This corresponds to receive.fsckobjects configuration variable added (a
lot) earlier in 20dc001 (receive-pack: allow using --strict mode for
unpacking objects, 2008-02-25).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for logging updates in git-update-ref, doesn't make it
clear that only a specific subset of refs are honored by this variable.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc versions since 5.0.6 treat a double-dash surrounded by spaces
(outside of verbatim environments) as a request to insert an em dash.
Such versions also treat the three-character sequence "\--", when not
followed by another dash, as a request to insert two literal minus
signs. Thus from time to time there have been patches to add
backslashes to AsciiDoc markup to escape double-dashes that are meant
to be represent '--' characters used literally on the command line;
see v1.4.0-rc1~174, Fix up docs where "--" isn't displayed correctly,
2006-05-05, for example.
AsciiDoc 6.0.3 (2005-04-20) made life harder by also treating
double-dashes without surrounding whitespace as markup for an em dash,
though only when formatting for backends other than the manpages
(e.g., HTML). Many pages needed to be changed to use a backslash
before the "--" in names of command-line flags like "--add" (see
v0.99.6~37, Update tutorial, 2005-08-30).
AsciiDoc 8.3.0 (2008-11-29) refined the em-dash rule to avoid that
requirement. Double-dashes without surrounding spaces are not
rendered as em dashes any more unless bordered on both sides by
alphanumeric characters. The unescaped markup for option names (e.g.,
"--add") works fine, and many instances of this style have leaked into
Documentation/; git's HTML documentation contains many spurious em
dashes when formatted by an older toolchain. (This patch will not
change that.)
The upshot: "--" as an isolated word and in phrases like "git
web--browse" must be escaped if it is not to be rendered as an em dash
by current asciidoc. Use "\--" to avoid such misformatting in
sentences in which "--" represents a literal double-minus command line
argument that separates options and revs from pathspecs, and use
"{litdd}" in cases where the double-dash is embedded in the command
name. The latter is just for consistency with v1.7.3-rc0~13^2 (Work
around em-dash handling in newer AsciiDoc, 2010-08-23).
List of lines to fix found by grepping manpages for "(em".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the config option http.cookiefile is set, pass this file to libCURL using
the CURLOPT_COOKIEFILE option. This is similar to calling curl with the -b
option. This allows git http authorization with authentication mechanisms
that use cookies, such as SAML Enhanced Client or Proxy (ECP) used by
Shibboleth.
To use SAML/ECP, the user needs to request a session cookie with their own ECP
code. See for example:
<https://wiki.shibboleth.net/confluence/display/SHIB2/ECP>
Once the cookie file has been created, it can be passed to git with, e.g.
git config --global http.cookiefile "/home/dbrown/.curlcookies"
libCURL will then pass the appropriate session cookies to the git http server.
Signed-off-by: Duncan Brown <duncan.brown@ligo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
* vh/config-interactive-singlekey-doc:
git-reset.txt: better docs for '--patch'
git-checkout.txt: better docs for '--patch'
git-stash.txt: better docs for '--patch'
git-add.txt: document 'interactive.singlekey'
config.txt: 'interactive.singlekey; is used by...
The config variable 'interactive.singlekey' influences also '--patch' mode of
git-add, git-reset, and git-checkout.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
* rr/doc-content-type:
Documentation: Allow custom diff tools to be specified in 'diff.tool'
Documentation: Add diff.<driver>.* to config
Documentation: Move diff.<driver>.* from config.txt to diff-config.txt
Documentation: Add filter.<driver>.* to config
Reading the diff-family and config man pages one may think that the
color.diff and color.ui settings apply to all diff commands. Make it
clearer that they do not apply to the plumbing variants
diff-{files,index,tree}.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide an environment variable GIT_PREFIX which contains the subdirectory
from which a !alias was called (i.e. 'git rev-parse --show-prefix') since
these cd to the to level directory before they are executed.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the gitattributes page contains comprehensive information
about these configuration options, they should be included in the
config documentation for completeness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the order to 1/0 to have the same true/false order as the rest
of the possibilities for a boolean variable in order not not confuse
users.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of 7 comes from fairly early in git development, when
seven hex digits was a lot (it covers about 250+ million hash
values). Back then I thought that 65k revisions was a lot (it was what
we were about to hit in BK), and each revision tends to be about 5-10
new objects or so, so a million objects was a big number.
These days, the kernel isn't even the largest git project, and even
the kernel has about 220k revisions (_much_ bigger than the BK tree
ever was) and we are approaching two million objects. At that point,
seven hex digits is still unique for a lot of them, but when we're
talking about just two orders of magnitude difference between number
of objects and the hash size, there _will_ be collisions in truncated
hash values. It's no longer even close to unrealistic - it happens all
the time.
We should both increase the default abbrev that was unrealistically
small, _and_ add a way for people to set their own default per-project
in the git config file.
This is the first step to first make it configurable; the default of 7
is not raised yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 72a5b561fc, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the behavior of fetch and pull can be configured to the recently added
'on-demand' mode separately for each submodule too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To enable the user to change the default behavior of "git fetch" and "git
pull" regarding submodule recursion add the new "on-demand" value which
has just been added to the "--recurse-submodules" command line option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' without arguments is currently not supported. Make it
default to 'git rebase @{upstream}'. That is also what 'git pull
[--rebase]' defaults to, so it only makes sense that 'git rebase'
defaults to the same thing.
Defaulting to @{upstream} will make it possible to run e.g. 'git
rebase -i' without arguments, which is probably a quite common use
case. It also improves the scenario where you have multiple branches
that rebase against a remote-tracking branch, where you currently have
to choose between the extra network delay of 'git pull' or the
slightly awkward keys to enter 'git rebase @{u}'.
The error reporting when no upstream is configured for the current
branch or when no branch is checked out is reused from git-pull.sh. A
function is extracted into git-parse-remote.sh for this purpose.
Helped-by: Yann Dirson <ydirson@altern.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
This reverts commit f5e025a9d5.
The commit reflected what the code did. But the code did that because
it had bugs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Include links to feeds in HTML header only for '200 OK' response
fsck docs: remove outdated and useless diagnostic
userdiff: fix typo in ruby and python word regexes
trace.c: mark file-local function static
Fix typo in git-gc document.
The variable gc.packrefs for git-gc can be set to true, false and
"notbare", not "nobare".
Signed-off-by: Jiang Xin <jiangxin@ossxp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
A new whitespace "rule" is added that sets the tab width to use for
whitespace checks and fix-ups and replaces the hard-coded constant 8.
Since the setting is part of the rules, it can be set per file using
.gitattributes.
The new configuration is backwards compatible because older git versions
simply ignore unknown whitespace rules.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "[add] ignore-errors" tweakable introduced by v1.5.6-rc0~30^2 (Add
a config option to ignore errors for git-add, 2008-05-12) does not
follow the usual convention for naming values in the git configuration
file.
What convention? Glad you asked.
The section name indicates the affected subsystem.
The subsection name, if any, indicates which of
an unbound set of things to set the value for.
The variable name describes the effect of tweaking
this knob.
The section and variable names can be broken into
words using bumpyCaps in documentation as a hint to
the reader. These word breaks are not significant
at the level of code, since the section and variable
names are not case sensitive.
The name "add.ignore-errors" includes a dash, meaning a naive
configuration file like
[add]
ignoreErrors
does not have any effect. Avoid such confusion by renaming to the
more consistent add.ignoreErrors, but keep the old version for
backwards compatibility.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/repack-reuse-object:
Documentation: pack.compression: explain how to recompress
repack: add -F flag to let user choose between --no-reuse-delta/object
Conflicts:
Documentation/git-repack.txt
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new boolean "fetchRecurseSubmodules" config option controls the
behavior for "git fetch" and "git pull". It specifies if these commands
should recurse into submodules and fetch new commits there too and can be
set separately for each submodule.
In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries
are read before looking for them in .git/config. Thus settings found in
.git/config will override those from .gitmodules, thereby allowing the
user to ignore settings given by the remote side while also letting
upstream set reasonable defaults for those users who don't have special
needs.
This configuration can be overridden by the command line option
"--[no-]recurse-submodules" of "git fetch" and "git pull".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote branch" is a branch hosted in a remote repository, while
"remote-tracking branch" is a copy of such branch, hosted locally.
The distinction is subtle when the copy is up-to-date, but rather
fundamental to understand what "git fetch" and "git push" do.
This patch should fix all incorrect usages in Documentation/ directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though git makes sure that it uses enough hexdigits to show an
abbreviated object name unambiguously, as more objects are added to the
repository over time, a short name that used to be unique will stop being
unique. Git uses this many extra hexdigits that are more than necessary
to make the object name currently unique, in the hope that its output will
stay unique a bit longer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/t9001-send-email.sh: fix stderr redirection in 'Invalid In-Reply-To'
Clarify and extend the "git diff" format documentation
git-show-ref.txt: clarify the pattern matching
documentation: git-config minor cleanups
Update test script annotate-tests.sh to handle missing/extra authors
Change push.default's description to add hyphens between values and
descriptions to make the manpage easier to read. The html version is
readable either way.
Change status.showUntrackedFiles to make item descriptions be
sentences and to use the same asciidoc format as push.default. The
only visual change is the additions of "."
Signed-off-by: Cliff Frey <cliff@meraki.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/repack-reuse-object:
Documentation: pack.compression: explain how to recompress
repack: add -F flag to let user choose between --no-reuse-delta/object
Add a small remark about how to recompress all existing objects after
changing the compression level for pack files.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-config(1), diff.noprefix was placed in between
diff.mnemonicprefix and the list of mnemonic prefixes, which is
obviously incorrect and very confusing to readers. Now, it is located
after the end of the explanation of mnemonicprefix, which makes much
more sense.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kf/askpass-config:
Extend documentation of core.askpass and GIT_ASKPASS.
Allow core.askpass to override SSH_ASKPASS.
Add a new option 'core.askpass'.
The new command line parameter --smtp-server-option or default
configuration sendemail.smtpserveroption can be used to pass
specific options to the SMTP server. Update the documentation
accordingly.
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
Allow gitattributes to be set globally and system wide. This way, settings
for particular file types can be set in one place and apply for all user's
repositories.
The location of system-wide attributes file is $(prefix)/etc/gitattributes.
The location of the global file can be configured by setting
core.attributesfile.
Some parts of the code were copied from the implementation of the same
functionality in config.c.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting this option has the same effect as setting the environment variable
'GIT_ASKPASS'.
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, document that checkout uses this flag too in the Documentation.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The markup "'git log'\'s" produces a stray backslash in the
produced man page. Removing the backslash fixes it.
While at it, tweak the surrounding description for readability.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
Originally, if remote.<name>.tagopt was set, the --tags and option would
have no effect when given to git fetch. So if
tagopt="--no-tags"
git fetch --tags
would not actually fetch tags.
This patch changes this behavior to only follow what is written in the
config if there is no option passed by the command line.
Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some firewalls restrict HTTP connections based on the clients user agent. This
commit provides the user the ability to modify the user agent string via either
a new config option (http.useragent) or by an environment variable
(GIT_HTTP_USER_AGENT).
Relevant documentation is added to Documentation/config.txt.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have a lot of submodules checked out, the time penalty to check
for dirty submodules can easily imply a multiplication of the total time
by the factor 20. This makes the difference between almost instantaneous
(< 2 seconds) and unbearably slow (> 50 seconds) here, since the disk
caches are constantly overloaded.
To this end, the submodule.*.ignore config option was introduced, but it
is per-submodule.
This commit introduces a global config setting to set a default
(porcelain) value for the --ignore-submodules option, keeping the
default at 'none'. It can be overridden by the submodule.*.ignore
setting and by the --ignore-submodules option.
Incidentally, this commit fixes an issue with the overriding logic:
multiple --ignore-submodules options would not clear the previously
set flags.
While at it, fix a typo in the documentation for submodule.*.ignore.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option was introduced by 747ca24 (receive-pack:
receive.denyDeleteCurrent, 2009-02-08) but never documented.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The url, path, and the update items in [submodule "foo"] stanzas
are nicely explained in the .gitmodules and ‘git submodule’
documentation. Point there from the config documentation.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use this feature regularly you can now enable it by default. In
case the user wants to override this config on the commandline
--no-autosquash can be used to force disabling.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
