bash 4.4 or newer gave a warning on NUL byte in command
substitution done in "git stash"; this has been squelched.
* kd/stash-with-bash-4.4:
stash: prevent warning about null bytes in input
"git rebase", especially when it is run by mistake and ends up
trying to replay many changes, spent long time in silence. The
command has been taught to show progress report when it spends
long time preparing these many changes to replay (which would give
the user a chance to abort with ^C).
* kw/rebase-progress:
rebase: turn on progress option by default for format-patch
format-patch: have progress option while generating patches
"git stash -u" used the contents of the committed version of the
".gitignore" file to decide which paths are ignored, even when the
file has local changes. The command has been taught to instead use
the locally modified contents.
* nm/stash-untracked:
stash: clean untracked files before reset
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit f7673490 ("more terse push output", 2007-11-05), git push
has a completely different output format than the one shown in the user
manual for a non-fast-forward push.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These used to be for manipulating the in-memory repo_tree structure,
but nowadays they are convenience wrappers to handle a few git-vs-svn
mismatches:
1. Git does not track empty directories but Subversion does. When
looking up a path in git that Subversion thinks exists and finding
nothing, we can safely assume that the path represents a
directory. This is needed when a later Subversion revision
modifies that directory.
2. Subversion allows deleting a file by copying. In Git fast-import
we have to handle that more explicitly as a deletion.
These are details of the tool's interaction with git fast-import.
Move them to fast_export.c, where other such details are handled.
This way the function names do not start with a repo_ prefix that
would clash with the repository object introduced in
v2.14.0-rc0~38^2~16 (repository: introduce the repository object,
2017-06-22) or an svn_ prefix that would clash with libsvn (in case
someone wants to link this code with libsvn some day).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.10-rc0~118^2~4^2~4^2~3 (vcs-svn: pass paths through to
fast-import, 2010-12-13) this is an alias for fast_export_delete.
Remove the unnecessary layer of indirection.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the rest of Git, these modes are spelled as S_IFDIR,
S_IFREG | 0644, S_IFREG | 0755, and S_IFLNK. Use the same constants
in svn-fe for simplicity and consistency.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I forgot to remove these in v1.7.10-rc0~118^2~4^2~5^2~4 (vcs-svn:
eliminate repo_tree structure, 2010-12-10).
This finishes what was started in commit 36f63b50 (vcs-svn: remove
unused prototypes, 2017-08-21).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for pack-objects describes that it creates "a packed
archive of objects", which is confusing because it may create multiple
packs if --max-pack-size is set. Update the documentation to clarify
this, and explaining in which cases such a feature would be useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a file .tsan-suppressions and list two functions in it: want_color()
and transfer_debug(). Both of these use the pattern
static int foo = -1;
if (foo < 0)
foo = bar();
where bar always returns the same non-negative value. This can cause
ThreadSanitizer to diagnose a race when foo is written from two threads.
That is indeed a race, although it arguably doesn't matter in practice
since it's always the same value that is written.
Add NEEDSWORK-comments to the functions so that this problem is not
forever swept way under the carpet.
The suppressions-file is used by setting the environment variable
TSAN_OPTIONS to, e.g., "suppressions=$(pwd)/.tsan-suppressions". Observe
that relative paths such as ".tsan-suppressions" might not work.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_setlen(., 0) writes '\0' to sb.buf[0], where buf is either
allocated and unique to sb, or the global slopbuf. The slopbuf is meant
to provide a guarantee that buf is not NULL and that a freshly
initialized buffer contains the empty string, but it is not supposed to
be written to. That strbuf_setlen writes to slopbuf has at least two
implications:
First, it's wrong in principle. Second, it might be hiding misuses which
are just waiting to wreak havoc. Third, ThreadSanitizer detects a race
when multiple threads write to slopbuf at roughly the same time, thus
potentially making any more critical races harder to spot.
Avoid writing to strbuf_slopbuf in strbuf_setlen. Let's instead assert
on the first byte of slopbuf being '\0', since it helps ensure the
promised invariant of buf[len] == '\0'. (We know that "len" was already
0, or someone has messed with "alloc". If someone has fiddled with the
fields that much beyond the correct interface, they're on their own.)
This is a function which is used in many places, possibly also in hot
code paths. There are two branches in strbuf_setlen already, and we are
adding a third and possibly a fourth (in the assert). In hot code paths,
we hopefully reuse the buffer in order to avoid continous reallocations.
Thus, after a start-up phase, we should always take the same path,
which might help branch prediction, and we would never make the assert.
If a hot code path continuously reallocates, we probably have bigger
performance problems than this new safety-check.
Simple measurements do not contradict this reasoning. 100000000 times
resetting a buffer and adding the empty string takes 5.29/5.26 seconds
with/without this patch (best of three). Releasing at every iteration
yields 18.01/17.87. Adding a 30-character string instead of the empty
string yields 5.61/5.58 and 17.28/17.28(!).
This patch causes the git binary emitted by gcc 5.4.0 -O2 on my machine
to grow from 11389848 bytes to 11497184 bytes, an increase of 0.9%.
I also tried to piggy-back on the fact that we already check alloc,
which should already tell us whether we are using the slopbuf:
if (sb->alloc) {
if (len > sb->alloc - 1)
die("BUG: strbuf_setlen() beyond buffer");
sb->buf[len] = '\0';
} else {
if (len)
die("BUG: strbuf_setlen() beyond buffer");
assert(!strbuf_slopbuf[0]);
}
sb->len = len;
That didn't seem to be much slower (5.38, 18.02, 5.70, 17.32 seconds),
but it does introduce some minor code duplication. The resulting git
binary was 11510528 bytes large (another 0.1% increase).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The philosophy of reference locking has been, "if another process is
changing a reference, then whatever I'm trying to do to it will
probably fail anyway because my old-SHA-1 value is probably no longer
current". But this argument falls down if the other process has locked
the reference to do something that doesn't actually change the value
of the reference, such as `pack-refs` or `reflog expire`. There
actually *is* a decent chance that a planned reference update will
still be able to go through after the other process has released the
lock.
So when trying to lock an individual reference (e.g., when creating
"refs/heads/master.lock"), if it is already locked, then retry the
lock acquisition for approximately 100 ms before giving up. This
should eliminate some unnecessary lock conflicts without wasting a lot
of time.
Add a configuration setting, `core.filesRefLockTimeout`, to allow this
setting to be tweaked.
Note: the function `get_files_ref_lock_timeout_ms()` cannot be private
to the files backend because it is also used by `write_pseudoref()`
and `delete_pseudoref()`, which are defined in `refs.c` so that they
can be used by other reference backends.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_merge_state() writes out the merge heads, mode, and msg. But we
may want to write out heads, mode without the msg. So, split out heads
(+mode) into a separate function write_merge_heads() that is called by
write_merge_state().
No funtional change so far, except when these non-atomic writes are
interrupted: we write heads-mode-msg now when we used to write
heads-msg-mode.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_commit() cannot be reached in the non-squash case:
It is called by merge_trivial() and finish_automerge() only, but the
calls to the latter are somewhat hard to track:
If option_commit is not set, the code in cmd_merge() uses a fake
conflict return code (ret=1) to avoid writing the tree, which also
avoids setting automerge_was_ok (just as in the proper ret==1 case), so
that finish_automerge() is not called.
To ensure that no code change breaks that assumption, safe-guard
prepare_to_commit() by a BUG() statement.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking the conditional of "while (me->remaining)", we did not
hold the lock. Calling find_deltas would still be safe, since it checks
"remaining" (after taking the lock) and is able to handle all values. In
fact, this could (currently) not trigger any bug: a bug could happen if
`remaining` transitioning from zero to non-zero races with the evaluation
of the while-condition, but these are always separated by the
data_ready-mechanism.
Make sure we have the lock when we read `remaining`. This does mean we
release it just so that find_deltas can take it immediately again. We
could tweak the contract so that the lock should be taken before calling
find_deltas, but let's defer that until someone can actually show that
"unlock+lock" has a measurable negative impact.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert_attrs contains an "if-else". In the "if", we set attr_action
twice, and the first assignment has no effect. In the "else", we do not
set it at all. Since git_check_attr always returns the same value, we'll
always end up in the "if", so there is no problem right now. But
convert_attrs is obviously trying not to rely on such an
implementation-detail of another component.
Make the initialization of attr_action after the if-else. Remove the
earlier assignments.
Suggested-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two configuration variables are described in the documentation
to take an expiry period expressed in the number of days:
gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
The default is 60 days.
gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
The default is 15 days.
There is no strong reason not to allow a more general "approxidate"
expiry specification, e.g. "5.days.ago", or "never".
Rename the config_get_expiry() helper introduced in the previous
step to git_config_get_expiry_in_days() and move it to a more
generic place, config.c, and use date.c::parse_expiry_date() to do
so. Give it an ability to allow the caller to tell among three
cases (i.e. there is no "gc.rerereResolved" config, there is and it
is correctly parsed into the *expiry variable, and there was an
error in parsing the given value). The current caller can work
correctly without using the return value, though.
In the future, we may find other variables that only allow an
integer that specifies "this many days" or other unit of time, and
when it happens we may need to drop "_days" suffix from the name of
the function and instead pass the "scale" value as another parameter.
But this will do for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two configuration variables, gc.rerereResolved and
gc.rerereUnresolved, are measured in days and are passed as such
into the prune_one() helper function, which worked in time_t to see
if an entry in the rerere database is past its expiry.
Instead, have the caller turn the number of days into the expiry
timestamp. Further, use timestamp_t instead of time_t. This will
make it possible to extend the way the configuration variable is
spelled by using date.c::parse_expiry_date() that gives the expiry
timestamp in timestamp_t.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test creates a rerere database entry that is two days old, and
tries to expire with three different custom expiry configuration
(keep ones less than 5 days old, keep ones used less than 5 days
ago, and expire everything right now).
We'll be introducing a different way to spell the same "5 days" and
"right now" parameter in a later step; parameterize the test to make
it easier to test the new spelling when it happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the "rerere gc with custom expiry" test up, so that it is close
to the existing basic "rerere gc" tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test blindly trusted that there may be _some_ entries left in
the rerere database, and used them by updating their timestamps to
see if the gc threshold variables are honoured correctly. This
won't work if there is no entry in the database when the test
begins.
Instead, clear the rerere database, and populate it with a few known
entries (which are bogus, but for the purpose of testing "garbage
collection", it does not matter---we want to make sure we collect
old cruft, even if the files are corrupt rerere database entries),
and use them for the expiry test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "multiple identical conflicts" test counts the number of entries
in the rerere database after trying a handful of mergy operations
and recording their resolutions, but without initializing the rerere
database to a known state, allowing the state left by previous tests
to trigger a false failure. Make it robust by cleaning the database
before it starts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For people that work with very large plain text files it may be easier
if one can bypass viewing the htmlized blob and instead click directly
to the raw file (rather then click through 'blob' and then to 'raw').
Signed-off-by: Job Snijders <job@instituut.net>
Reviewed-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "ref-store" code reorganization continues.
* mh/packed-ref-store: (32 commits)
files-backend: cheapen refname_available check when locking refs
packed_ref_store: handle a packed-refs file that is a symlink
read_packed_refs(): die if `packed-refs` contains bogus data
t3210: add some tests of bogus packed-refs file contents
repack_without_refs(): don't lock or unlock the packed refs
commit_packed_refs(): remove call to `packed_refs_unlock()`
clear_packed_ref_cache(): don't protest if the lock is held
packed_refs_unlock(), packed_refs_is_locked(): new functions
packed_refs_lock(): report errors via a `struct strbuf *err`
packed_refs_lock(): function renamed from lock_packed_refs()
commit_packed_refs(): use a staging file separate from the lockfile
commit_packed_refs(): report errors rather than dying
packed_ref_store: make class into a subclass of `ref_store`
packed-backend: new module for handling packed references
packed_read_raw_ref(): new function, replacing `resolve_packed_ref()`
packed_ref_store: support iteration
packed_peel_ref(): new function, extracted from `files_peel_ref()`
repack_without_refs(): take a `packed_ref_store *` parameter
get_packed_ref(): take a `packed_ref_store *` parameter
rollback_packed_refs(): take a `packed_ref_store *` parameter
...
A helper function to read a single whole line into strbuf
mistakenly triggered OOM error at EOF under certain conditions,
which has been fixed.
* rs/strbuf-getwholeline-fix:
strbuf: clear errno before calling getdelim(3)
"git svn" used with "--localtime" option did not compute the tz
offset for the timestamp in question and instead always used the
current time, which has been corrected.
* ur/svn-local-zone:
git svn fetch: Create correct commit timestamp when using --localtime
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
