Documentation for "git merge --verify-signatures" has been updated
to clarify that the signature of only the commit at the tip is
verified. Also the phrasing used for signature and key validity is
adjusted to align with that used by OpenPGP.
* kf/gpg-sig-verification-doc:
Documentation: clarify signature verification
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
Consolidate description of tilde-expansion that is done to
configuration variables that take pathname to a single place.
* jc/config-pathname-type:
config: describe 'pathname' value type
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
"git commit-tree" plumbing command required the user to always sign
its result when the user sets the commit.gpgsign configuration
variable, which was an ancient mistake. Rework "git rebase" that
relied on this mistake so that it reads commit.gpgsign and pass (or
not pass) the -S option to "git commit-tree" to keep the end-user
expectation the same, while teaching "git commit-tree" to ignore
the configuration variable. This will stop requiring the users to
sign commit objects used internally as an implementation detail of
"git stash".
* jc/commit-tree-ignore-commit-gpgsign:
commit-tree: do not pay attention to commit.gpgsign
Clarify that "merge --verify-signatures" checks the signature on the
tip commit of the history being merged.
Uniformise the vocabulary used wrt. key/signature validity with OpenPGP:
- a signature is valid if made by a key with a valid uid;
- in the default trust-model, a uid is valid if signed by a trusted key;
- a key is trusted if the (local) user set a trust level for it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Keller Fuchs <KellerFuchs@hashbang.sh>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to add incorrect "linkgit:<page>[<section>]" references
to our documentation suite. Catch these common classes of errors:
* Referring to Documentation/<page>.txt that does not exist.
* Referring to a <page> outside the Git suite. In general, <page>
must begin with "git".
* Listing the manual <section> incorrectly. The first line of the
Documentation/<page>.txt must end with "(<section>)".
with a new script "ci/lint-gitlink", and drive it from "make check-docs".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit.verbose configuration variable as a convenience for those
who always prefer --verbose.
Add tests to check the behavior introduced by this commit and also to
verify that behavior of status doesn't break because of this commit.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a handful of incorrect "linkgit:<page>[<section>]"
instances in our documentation set.
* Some have an extra colon after "linkgit:"; fix them by removing
the extra colon;
* Some refer to a page outside the Git suite, namely curl(1); fix
them by using the `curl(1)` that already appears on the same page
for the same purpose of referring the readers to its manual page.
* Some spell the name of the page incorrectly, e.g. "rev-list" when
they mean "git-rev-list"; fix them.
* Some list the manual section incorrectly; fix them to make sure
they match what is at the top of the target of the link.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP transport clients learned to throw extra HTTP headers at the
server, specified via http.extraHeader configuration variable.
* js/http-custom-headers:
http: support sending custom HTTP headers
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't consistently use `backticks` for formatting shell variables.
This patch improves the consistency on shell variables (and a few nearby
mentions of "gpg" commands), though it still doesn't straighten out the
use of "quotes."
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion in [1] pointed out that '.' is a faulty suggestion as
there is a corner case where it fails:
> "submodule deinit ." may have "worked" in the sense that you would
> have at least one path in your tree and avoided this "nothing
> matches" most of the time. It would have still failed with the
> exactly same error if run in an empty repository, i.e.
>
> $ E=/var/tmp/x/empty && rm -fr "$E" && mkdir -p "$E" && cd "$E"
> $ git init
> $ rungit v2.6.6 submodule deinit .
> error: pathspec '.' did not match any file(s) known to git.
> Did you forget to 'git add'?
> $ >file && git add file
> $ rungit v2.6.6 submodule deinit .
> $ echo $?
> 0
So instead of a pathspec add the '--all' option to deinit all submodules
and add a test to check for the corner case of an empty repository.
The code only needs to learn about the '--all' option and doesn't
require further changes as `git submodule--helper list "$@"` will list
all submodules when "$@" is empty.
[1] http://news.gmane.org/gmane.comp.version-control.git/289535
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_COUNTUP() merely increments the counter upon --option, and resets it
to 0 upon --no-option, which means that there is no "unspecified" value
with which a client can initialize the counter to determine whether or
not --[no]-option was seen at all.
Make OPT_COUNTUP() treat any negative number as an "unspecified" value
to address this shortcoming. In particular, if a client initializes the
counter to -1, then if it is still -1 after parse_options(), then
neither --option nor --no-option was seen; if it is 0, then --no-option
was seen last, and if it is 1 or greater, than --option was seen last.
This change does not affect the behavior of existing clients because
they all use the initial value of 0 (or more).
Note that builtin/clean.c initializes the variable used with
OPT__FORCE (which uses OPT_COUNTUP()) to a negative value, but it is set
to either 0 or 1 by reading the configuration before the code calls
parse_options(), i.e. as far as parse_options() is concerned, the
initial value of the variable is not negative.
To test this behavior, in test-parse-options.c, "verbose" is set to
"unspecified" while quiet is set to 0 which will test the new behavior
with all sets of values.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change:
* Sentences that needed "the" or "a" to either add those or change them
so they don't need them.
* The little tangent about "You can use this to do X (if your project
wants to do X)" can just be shortened to "if you want to do X".
* s/parameter/parameters/ when the plural made more sense.
Most of this goes all the way back to the initial introduction of
hooks.txt in 6d35cc76 (Document hooks., 2005-09-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any ACL you implement via an 'update' hook isn't actual access control
if the user has login access to the machine running git, because they
can trivially just build their own version of Git which doesn't run the
hook.
Change the documentation to take this dangerous edge case into account,
and remove the mention of the advice originating on the mailing list,
the users reading this don't care where the idea came up.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation so that:
* We don't talk about "little scripts". Hooks can be as big as you
want, and don't have to be scripts, just call them "programs".
* We note that we change the working directory before a hook is called,
nothing documented this explicitly, but the current behavior is
predictable. It helps a lot to know what directory these hooks will
be executed from.
* We don't make claims about the example hooks which may not be true
depending on the configuration of 'init.templateDir'. Clarify that
we're talking about the default settings of git-init in those cases,
and move some of this documentation into git-init's documentation
about the default templates.
* We briefly note in the intro that hooks can get their arguments in
various different ways, and that how exactly is described below for
each hook.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should handle .gitconfig files that specify things like:
[http]
cookieFile = "~/.gitcookies"
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a dedicated section for various value-types used in the
configuration variables already, because we needed to describe how
booleans and scaled integers can be spelled, and the pathname type
would fit there.
Adjust the description of `include.path`, `core.excludesFile` and
`commit.template` variables slightly to clarify that these variables
are of this type.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ba3c69a9 (commit: teach --gpg-sign option, 2011-10-05) introduced a
"signed commit" by teaching the --[no]-gpg-sign option and the
commit.gpgsign configuration variable to various commands that
create commits.
Teaching these to "git commit" and "git merge", both of which are
end-user facing Porcelain commands, was perfectly fine. Allowing
the plumbing "git commit-tree" to suddenly change the behaviour to
surprise the scripts by paying attention to commit.gpgsign was not.
Among the in-tree scripts, filter-branch, quiltimport, rebase and
stash are the commands that run "commit-tree". If any of these
wants to allow users to always sign every single commit, they should
offer their own configuration (e.g. "filterBranch.gpgsign") with an
option to disable signing (e.g. "git filter-branch --no-gpgsign").
Ignoring commit.gpgsign option _obviously_ breaks the backward
compatibility, but it is easy to follow the standard pattern in
scripts to honor whatever configuration variable they choose to
follow. E.g.
case $(git config --bool commit.gpgsign) in
true) sign=-S ;;
*) sign= ;;
esac &&
git commit-tree $sign ...whatever other args...
Do so to make sure that "git rebase" keeps paying attention to the
configuration variable, which unfortunately is a documented mistake.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
Also change UK english "behaviour" to US english "behavior".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that people around here are all happy with the updated
heuristics used to decide where the hunks are separated. Let's keep
that as the default. Even though we do not expect too much trouble
from the difference between the old and the new algorithms, just in
case let's leave the implementation of the knobs to turn it off for
emergencies. There is no longer need for documenting them, though.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be tempting for a server admin to want a stable set of
long-lived packs for dumb clients; but also want to enable bitmaps
to serve smart clients more quickly.
Unfortunately, such a configuration is impossible; so at least warn
users of this incompatibility since commit 21134714 (pack-objects:
turn off bitmaps when we split packs, 2014-10-16).
Tested the warning by inspecting the output of:
make -C t t5310-pack-bitmaps.sh GIT_TEST_OPTS=-v
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduce a way to send custom HTTP headers with all requests.
This allows us, for example, to send an extra token from build agents
for temporary access to private repositories. (This is the use case that
triggered this patch.)
This feature can be used like this:
git -c http.extraheader='Secret: sssh!' fetch $URL $REF
Note that `curl_easy_setopt(..., CURLOPT_HTTPHEADER, ...)` takes only
a single list, overriding any previous call. This means we have to
collect _all_ of the headers we want to use into a single list, and
feed it to cURL in one shot. Since we already unconditionally set a
"pragma" header when initializing the curl handles, we can add our new
headers to that list.
For callers which override the default header list (like probe_rpc),
we provide `http_copy_default_headers()` so they can do the same
trick.
Big thanks to Jeff King and Junio Hamano for their outstanding help and
patient reviews.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The possible reasons for exiting are now ordered by the exit code value.
While at it, rewrite the `can not write to the config file` to
`the config file cannot be written` to be grammatically correct and a
proper sentence.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to record the base commit automatically, it is equivalent
to set --base=auto in cmdline.
The format.useAutoBase has lower priority than command line option,
so if user set format.useAutoBase and pass the command line option in
the meantime, base_commit will be the one passed to command line
option.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --base=auto to record the base commit info automatically, the
base_commit will be the merge base of tip commit of the upstream branch
and revision-range specified in cmdline.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maintainers or third party testers may want to know the exact base tree
the patch series applies to. Teach git format-patch a '--base' option
to record the base tree info and append it at the end of the first
message (either the cover letter or the first patch in the series).
The base tree info consists of the "base commit", which is a well-known
commit that is part of the stable part of the project history everybody
else works off of, and zero or more "prerequisite patches", which are
well-known patches in flight that is not yet part of the "base commit"
that need to be applied on top of "base commit" in topological order
before the patches can be applied.
The "base commit" is shown as "base-commit: " followed by the 40-hex of
the commit object name. A "prerequisite patch" is shown as
"prerequisite-patch-id: " followed by the 40-hex "patch id", which can
be obtained by passing the patch through the "git patch-id --stable"
command.
Imagine that on top of the public commit P, you applied well-known
patches X, Y and Z from somebody else, and then built your three-patch
series A, B, C, the history would be like:
---P---X---Y---Z---A---B---C
With "git format-patch --base=P -3 C" (or variants thereof, e.g. with
"--cover-letter" of using "Z..C" instead of "-3 C" to specify the
range), the base tree information block is shown at the end of the
first message the command outputs (either the first patch, or the
cover letter), like this:
base-commit: P
prerequisite-patch-id: X
prerequisite-patch-id: Y
prerequisite-patch-id: Z
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a shallow clone of a repository with submodules, the depth
argument does not influence the submodules, i.e. the submodules are done
as non-shallow clones. It is unclear what the best default is for the
depth of submodules of a shallow clone, so we need to have the possibility
to do all kinds of combinations:
* shallow super project with shallow submodules
e.g. build bots starting always from scratch. They want to transmit
the least amount of network data as well as using the least amount
of space on their hard drive.
* shallow super project with unshallow submodules
e.g. The superproject is just there to track a collection of repositories
and it is not important to have the relationship between the repositories
intact. However the history of the individual submodules matter.
* unshallow super project with shallow submodules
e.g. The superproject is the actual project and the submodule is a
library which is rarely touched.
The new switch to select submodules to be shallow or unshallow supports
all of these three cases.
It is easy to transition from the first to the second case by just
unshallowing the submodules (`git submodule foreach git fetch
--unshallow`), but it is not possible to transition from the second to the
first case (as we would have already transmitted the non shallow over
the network). That is why we want to make the first case the default in
case of a shallow super project. This leads to the inconvenience in the
second case with the shallow super project and unshallow submodules,
as you need to pass `--no-shallow-submodules`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the configuration parser errors out when core.autocrlf
is set to 'input' when core.eol is set to 'crlf', there is no need
to do so, because the core.autocrlf setting trumps core.eol.
Allow all combinations of core.crlf and core.eol and document
that core.autocrlf overrides core.eol.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit said:
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do
so and instead leaves it as low-hanging fruit for others,
because such a "two project merge" would be done after fetching
the other project into some location in the working tree of an
existing project and making sure how well they fit together, it
is sufficient to allow a local merge without such an option
pass-through from "git pull" to "git merge".
Prepare a patch to make it a reality, just in case it is needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to produce the smallest possible diff and combine several diff
hunks together, we implement a heuristic from GNU Diff which moves diff
hunks forward as far as possible when we find common context above and
below a diff hunk. This sometimes produces less readable diffs when
writing C, Shell, or other programming languages, ie:
...
/*
+ *
+ *
+ */
+
+/*
...
instead of the more readable equivalent of
...
+/*
+ *
+ *
+ */
+
/*
...
Implement the following heuristic to (optionally) produce the desired
output.
If there are diff chunks which can be shifted around, shift each hunk
such that the last common empty line is below the chunk with the rest
of the context above.
This heuristic appears to resolve the above example and several other
common issues without producing significantly weird results. However, as
with any heuristic it is not really known whether this will always be
more optimal. Thus, it can be disabled via diff.compactionHeuristic.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching of history by naming a commit object name directly didn't
work across remote-curl transport.
* gf/fetch-pack-direct-object-fetch:
fetch-pack: update the documentation for "<refs>..." arguments
fetch-pack: fix object_id of exact sha1
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
When "git log" shows the log message indented by 4-spaces, the
remainder of a line after a HT does not align in the way the author
originally intended. The command now expands tabs by default in
such a case, and allows the users to override it with a new option,
'--no-expand-tabs'.
* lt/pretty-expand-tabs:
pretty: test --expand-tabs
pretty: allow tweaking tabwidth in --expand-tabs
pretty: enable --expand-tabs by default for selected pretty formats
pretty: expand tabs in indented logs to make things line up properly
"git pull --rebase" learned "--[no-]autostash" option, so that
the rebase.autostash configuration variable set to true can be
overridden from the command line.
* mj/pull-rebase-autostash:
t5520: test --[no-]autostash with pull.rebase=true
t5520: reduce commom lines of code
t5520: factor out common "failing autostash" code
t5520: factor out common "successful autostash" code
t5520: use better test to check stderr output
t5520: ensure consistent test conditions
t5520: use consistent capitalization in test titles
pull --rebase: add --[no-]autostash flag
git-pull.c: introduce git_pull_config()
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
"git worktree add" can be given "--no-checkout" option to only
create an empty worktree without checking out the files.
* rz/worktree-no-checkout:
worktree: add: introduce --checkout option
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
"git merge" used to allow merging two branches that have no common
base by default, which led to a brand new history of an existing
project created and then get pulled by an unsuspecting maintainer,
which allowed an unnecessary parallel history merged into the
existing project. The command has been taught not to allow this by
default, with an escape hatch "--allow-unrelated-histories" option
to be used in a rare event that merges histories of two projects
that started their lives independently.
* jc/merge-refuse-new-root:
merge: refuse to create too cool a merge by default
"git tag" can create an annotated tag without explicitly given an
"-a" (or "-s") option (i.e. when a tag message is given). A new
configuration variable, tag.forceSignAnnotated, can be used to tell
the command to create signed tag in such a situation.
* la/tag-force-signing-annotated-tags:
tag: add the option to force signing of annotated tags
"git rebase -x" can be used without passing "-i" option.
* sb/rebase-x:
t3404: cleanup double empty lines between tests
rebase: decouple --exec from --interactive
A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
The correct api is trace_printf_key(), not trace_print_key().
Also do not throw a random string at printf(3)-like function;
instead, feed it as a parameter that is fed to a "%s" conversion
specifier.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-format-patch recognizes -s as shorthand only for --signoff, however,
its documentation shows -s as shorthand for both --signoff and
--no-patch. Resolve this confusion by suppressing the bogus -s shorthand
for --no-patch.
While here, also avoid showing the --no-patch option in git-format-patch
documentation since it doesn't make sense to ask to suppress the patch
while at the same time explicitly asking to format the patch (which,
after all, is the purpose of git-format-patch).
Reported-by: Kevin Brodsky <corax26@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching of history by naming a commit object name directly didn't
work across remote-curl transport.
* gf/fetch-pack-direct-object-fetch:
fetch-pack: update the documentation for "<refs>..." arguments
fetch-pack: fix object_id of exact sha1
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
The credential.helper configuration variable is cumulative and
there is no good way to override it from the command line. As
a special case, giving an empty string as its value now serves
as the signal to clear the values specified in various files.
* jk/credential-clear-config:
credential: let empty credential specs reset helper list
The end-user facing Porcelain level commands like "diff" and "log"
now enables the rename detection by default.
* mm/diff-renames-default:
diff: activate diff.renames by default
log: introduce init_log_defaults()
t: add tests for diff.renames (true/false/unset)
t4001-diff-rename: wrap file creations in a test
Documentation/diff-config: fix description of diff.renames
'git for-each-ref's manpage says that '--contains' only lists tags,
but it lists all kinds of refs.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By adding this option which defaults to true, we can use the
corresponding --no-checkout to make some customizations before
the checkout, like sparse checkout, etc.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_CMDMODE mechanism was introduced in the release of 1.8.5 to actively
notice when multiple "operation mode" options that specify mutually
incompatible operation modes are given.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it makes sense to allow merging unrelated histories of two
projects that started independently into one, in the way "gitk" was
merged to "git" itself aka "the coolest merge ever", such a merge is
still an unusual event. Worse, if somebody creates an independent
history by starting from a tarball of an established project and
sends a pull request to the original project, "git merge" however
happily creates such a merge without any sign of something unusual
is happening.
Teach "git merge" to refuse to create such a merge by default,
unless the user passes a new "--allow-unrelated-histories" option to
tell it that the user is aware that two unrelated projects are
merged.
Because such a "two project merge" is a rare event, a configuration
option to always allow such a merge is not added.
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do so
and instead leaves it as low-hanging fruit for others, because such
a "two project merge" would be done after fetching the other project
into some location in the working tree of an existing project and
making sure how well they fit together, it is sufficient to allow a
local merge without such an option pass-through from "git pull" to
"git merge". Many tests that are updated by this patch does the
pass-through manually by turning:
git pull something
into its equivalent:
git fetch something &&
git merge --allow-unrelated-histories FETCH_HEAD
If somebody is inclined to add such an option, updated tests in this
change need to be adjusted back to:
git pull --allow-unrelated-histories something
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `tag.forcesignannotated` configuration variable makes "git tag"
that would implicitly create an annotated tag to instead create a
signed tag. For example
$ git tag -m "This is a message" tag-with-message
$ git tag -F message-file tag-with-message
would create a signed tag if the configuration variable is in
effect. To override this from the command line, the user can
explicitly ask for an annotated tag, like so:
$ git tag -a -m "This is a message" tag-with-message
$ git tag -a -F message-file tag-with-message
Creation of a light-weight tag, i.e.
$ git tag lightweight
is not affected.
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase.autoStash configuration variable is set, there is no way to
override it for "git pull --rebase" from the command line.
Teach "git pull --rebase" the --[no-]autostash command line flag which
overrides the current value of rebase.autoStash, if set. As "git rebase"
understands the --[no-]autostash option, it's just a matter of passing
the option to underlying "git rebase" when "git pull --rebase" is called.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Paul Tan <pyokagan@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the later steps of preparing a patch series I do not want to
edit or reorder the patches any more, but just make sure the
test suite passes after each patch and also to fix breakage
right there if some of the steps fail. I could run
EDITOR=true git rebase -i <anchor> -x "make test"
but it would be simpler if it can be spelled like so:
git rebase <anchor> -x "make test"
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.5:
Git 2.5.5
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
* maint-2.4:
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
The two alternative ways to spell "ssh://" transport have been
deprecated for a long time. The last mention of them has finally
removed from the documentation.
* cn/deprecate-ssh-git-url:
Disown ssh+git and git+ssh
Map a P4 user to a specific name and email address in Git with the
"git-p4.mapUser" config. The config value must be a string adhering
to the format "p4user = First Lastname <email@address.com>".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the area of globs applicability for branches and tags
in git-svn. It is now possible to use globs like 'a*e', or 'release_*'.
This allows users to avoid long lines in config like:
branches = branches/{release_20,release_21,release_22,...}
In favor of:
branches = branches/release_*
[ew: amended commit message, minor formatting and style fixes]
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
There are no more callers, and it's a rather confusing
interface. This could just be folded into
git_config_with_options(), but for the sake of readability,
we'll leave it as a separate (static) helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
