"git grep" by default does not fall back to its "--no-index"
behaviour outside a directory under Git's control (otherwise the
user may by mistake end up running a huge recursive search); with a
new configuration (set in $HOME/.gitconfig--by definition this
cannot be set in the config file per project), this safety can be
disabled.
* tg/grep-no-index-fallback:
builtin/grep: add grep.fallbackToNoIndex config
t7810: correct --no-index test
Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR
(e.g. COMMIT_EDITMSG) that is meant to be left after the command is
done. This however did not work well if the repository is set to
be shared with core.sharedRepository and the umask of the previous
user is tighter. They have been made to work better by calling
unlink(2) and retrying after fopen(3) fails with EPERM.
* js/fopen-harder:
Handle more file writes correctly in shared repos
commit: allow editing the commit message even in shared repos
A few unportable C construct have been spotted by clang compiler
and have been fixed.
* jk/clang-pedantic:
bswap: add NO_UNALIGNED_LOADS define
avoid shifting signed integers 31 bits
Paths that have been told the index about with "add -N" are not
quite yet in the index, but a few commands behaved as if they
already are in a harmful way.
* nd/ita-cleanup:
grep: make it clear i-t-a entries are ignored
add and use a convenience macro ce_intent_to_add()
blame: remove obsolete comment
Some "git notes" operations, e.g. "git log --notes=<note>", should
be able to read notes from any tree-ish that is shaped like a notes
tree, but the notes infrastructure required that the argument must
be a ref under refs/notes/. Loosen it to require a valid ref only
when the operation would update the notes (in which case we must
have a place to store the updated notes tree, iow, a ref).
* mh/notes-allow-reading-treeish:
notes: allow treeish expressions as notes ref
Sometimes it's useful to know the main branch of a git repository
without actually downloading the repository. This can be done by
looking at the symrefs stored in the remote repository. Currently git
doesn't provide a simple way to show the symrefs stored on the remote
repository, even though the information is available. Add a --symref
command line argument to the ls-remote command, which shows the symrefs
in the remote repository.
While there, replace a literal tab in the format string with \t to make
it more obvious to the reader.
Suggested-by: pedro rijo <pedrorijo91@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently ls-remote uses a hand rolled parser for its command line
arguments. Use the parse-options api instead of the hand rolled parser
to simplify the code and make it easier to add new arguments. In
addition this improves the help message.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --refs option was originally introduced in 2718ff0 ("Improve
git-peek-remote"). The ls-remote command was first documented in
972b6fe ("ls-remote: drop storing operation and add documentation."),
but the --refs option was never documented. Fix this.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git tries to avoid creating a commit with an empty author
name or email. However, commits created by older, less
strict versions of git may still be in the history. There's
not much point in issuing a warning to stderr for an empty
author. The user can't do anything about it now, and we are
better off to simply include it in the shortlog output as an
empty name/email, and let the caller process it however they
see fit.
Older versions of shortlog differentiated between "author
header not present" (which complained) and "author
name/email are blank" (which included the empty ident in the
output). But since switching to format_commit_message, we
complain to stderr about either case (linux.git has a blank
author deep in its history which triggers this).
We could try to restore the older behavior (complaining only
about the missing header), but in retrospect, there's not
much point in differentiating these cases. A missing
author header is bogus, but as for the "blank" case, the
only useful behavior is to add it to the "empty name"
collection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in "--summary" mode, then we do not care about the
actual list of subject onelines associated with each author.
We care only about the number. So rather than store a
string-list for each author full of "<none>", let's just
keep a count.
This drops my best-of-five for "git shortlog -ns HEAD" on
linux.git from:
real 0m5.194s
user 0m5.028s
sys 0m0.168s
to:
real 0m5.057s
user 0m4.916s
sys 0m0.144s
That's about 2.5%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in --summary mode, we will always pass <none> to
insert_one_record, which will then do some normalization
(e.g., cutting out "[PATCH]"). There's no point in doing so
if we aren't going to use the result anyway.
This drops my best-of-five for "git shortlog -ns HEAD" on
linux.git from:
real 0m5.257s
user 0m5.104s
sys 0m0.156s
to:
real 0m5.194s
user 0m5.028s
sys 0m0.168s
That's only 1%, but arguably the result is clearer to read,
as we're able to group our variable declarations inside the
conditional block. It also opens up further optimization
possibilities for future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user asked us only to show counts for each author,
rather than the individual summary lines, then there is no
point in us generating the summaries only to throw them
away. With this patch, I measured the following speedup for
"git shortlog -ns HEAD" on linux.git (best-of-five):
[before]
real 0m5.644s
user 0m5.472s
sys 0m0.176s
[after]
real 0m5.257s
user 0m5.104s
sys 0m0.156s
That's only ~7%, but it's so easy to do, there's no good
reason not to. We don't have to touch any downstream code,
since we already fill in the magic string "<none>" to handle
commits without a message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gathering the author and oneline subject for each
commit, we hand-parse the commit headers to find the
"author" line, and then continue past to the blank line at
the end of the header.
We can replace this tricky hand-parsing by simply asking the
pretty-printer for the relevant items. This also decouples
the author and oneline parsing, opening up some new
optimizations in further commits.
One reason to avoid the pretty-printer is that it might be
less efficient than hand-parsing. However, I measured no
slowdown at all running "git shortlog -ns HEAD" on
linux.git.
As a bonus, we also fix a memory leak in the (uncommon) case
that the author field is blank.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use fixed-size buffers with fgets(), which
could lead to incorrect results in the unlikely event that a
line had something like "Author:" at exactly its 1024th
character.
But it's easy to convert this to a strbuf, and because we
can reuse the same buffer through the loop, we don't even
pay the extra allocation cost.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shortlog could read both the normal "git
log" output as well as "git log --format=raw". However, when
it was converted to C by b8ec592 (Build in shortlog,
2006-10-22), the trailing colon became mandatory, and we no
longer matched the raw output.
Given the amount of intervening time without any bug
reports, it's probable that nobody cares. But it's
relatively easy to fix, and the end result is hopefully more
readable than the original.
Note that this no longer matches "author: ", which we did
before, but that has never been a format generated by git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in a cross-platform environment, a user may want to
check if text files are stored normalized in the repository and
if .gitattributes are set appropriately.
Make it possible to let Git show the line endings in the index and
in the working tree and the effective text/eol attributes.
The end of line ("eolinfo") are shown like this:
"-text" binary (or with bare CR) file
"none" text file without any EOL
"lf" text file with LF
"crlf" text file with CRLF
"mixed" text file with mixed line endings.
The effective text/eol attribute is one of these:
"", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf"
git ls-files --eol gives an output like this:
i/none w/none attr/text=auto t/t5100/empty
i/-text w/-text attr/-text t/test-binary-2.png
i/lf w/lf attr/text eol=lf t/t5100/rfc2047-info-0007
i/lf w/crlf attr/text eol=crlf doit.bat
i/mixed w/mixed attr/ locale/XX.po
to show what eol convention is used in the data in the index ('i'),
and in the working tree ('w'), and what attribute is in effect,
for each path that is shown.
Add test cases in t0027.
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new expansion function, expand_loose_notes_ref which will first
check whether the ref can be found using get_sha1. If it can't be found
then it will fallback to using expand_notes_ref. The content of the
strbuf will not be changed if the notes ref can be located using
get_sha1. Otherwise, it may be updated as done by expand_notes_ref.
Since we now support merging from non-notes refs, remove the test case
associated with that behavior. Add a test case for merging from a
non-notes ref.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
List of patterns file could come from a DOS editor.
This is iffy; you may actually be trying to find a line with ^M in
it on a system whose line ending is LF. You can of course work it
around by having a line that has "^M^M^J", let the strbuf_getline()
eat the last "^M^J", leaving just the single "^M" as the pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple lines read here are concatenated on a single line to form a
multi-column output line. We do not want to have a CR at the end,
even if the input file consists of CRLF terminated lines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to prepare a text file with a DOS editor and feed it
as a batch command stream to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_OBJECT_DIRECTORY/info/alternates is a text file that can be
edited with a DOS editor. We do not want to use the real path with
CR appended at the end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rev-parse --parseopt" specification is clearly text and we
should anticipate that we may be fed CRLF lines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now there is no direct caller to strbuf_getline(), we can demote it
to file-scope static that is private to strbuf.c and rename it to
strbuf_getdelim(). Rename strbuf_getline_crlf(), which is designed
to be the most "text friendly" variant, and allow it to take over
this simplest name, strbuf_getline(), so we can add more uses of it
without having to type _crlf over and over again in the coming
steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we read "text" files that are supplied by the end user
(e.g. commit log message that was edited with $GIT_EDITOR upon 'git
commit -e'), and in some environments lines in a text file are
terminated with CRLF. Existing strbuf_getline() knows to read a
single line and then strip the terminating byte from the result, but
it is handy to have a version that is more tailored for a "text"
input that takes both '\n' and '\r\n' as line terminator (aka
<newline> in POSIX lingo) and returns the body of the line after
stripping <newline>.
Recently reimplemented "git am" uses such a function implemented
privately; move it to strbuf.[ch] and make it available for others.
Note that we do not blindly replace calls to strbuf_getline() that
uses LF as the line terminator with calls to strbuf_getline_crlf()
and this is very much deliberate. Some callers may want to treat an
incoming line that ends with CR (and terminated with LF) to have a
payload that includes the final CR, and such a blind replacement
will result in misconversion when done without code audit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line option --in-place to support in-place editing akin to
sed -i. This allows to write commands like the following:
git interpret-trailers --trailer "X: Y" a.txt > b.txt && mv b.txt a.txt
in a more concise way:
git interpret-trailers --trailer "X: Y" --in-place a.txt
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config variable branch.<branchname>.rebase is not only used by `git
pull`, but also by `git remote` when showing details about a remote.
Therefore, it needs to be taught to accept the newly-introduced
`interactive` value of said variable.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of years ago, I found the need to collaborate on topic
branches that were rebased all the time, and I really needed to see
what I was rebasing when pulling, so I introduced an
interactively-rebasing pull.
The way builtin pull works, this change also supports the value
'interactive' for the 'branch.<name>.rebase' config variable, which
is a neat thing because users can now configure given branches for
interactively-rebasing pulls without having to type out the complete
`--rebase=interactive` option every time they pull.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
This fixes https://github.com/git-for-windows/git/issues/500
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.
* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine
"git blame" learned to produce the progress eye-candy when it takes
too much time before emitting the first line of the result.
* ea/blame-progress:
blame: add support for --[no-]progress option
Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.
Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.
* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr
"branch --delete" has "branch -d" but "push --delete" does not.
* ps/push-delete-option:
push: add '-d' as shorthand for '--delete'
push: add '--delete' flag to synopsis
init_notes() is the main point of entry to the notes API. It ensures
that the input can be used as ref, because it needs a ref to update to
store notes tree after modifying it.
There however are many use cases where notes tree is only read, e.g.
"git log --notes=...". Any notes-shaped treeish could be used for such
purpose, but it is not allowed due to existing restriction.
Allow treeish expressions to be used in the case the notes tree is going
to be used without write "permissions". Add a flag to distinguish
whether the notes tree is intended to be used read-only, or will be
updated.
With this change, operations that use notes read-only can be fed any
notes-shaped tree-ish can be used, e.g. git log --notes=notes@{1}.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unlikely that we would fail to create or update a
symbolic ref (especially HEAD), but if we do, we should
notice and complain. Note that there's no need to give more
details in our error message; create_symref will already
have done so.
While we're here, let's also fix a minor memory leak in
clone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In shared repositories, we have to be careful when writing files whose
permissions do not allow users other than the owner to write them.
In particular, we force the marks file of fast-export and the FETCH_HEAD
when fetching to be rewritten from scratch.
This commit does not touch other calls to fopen() that want to
write files:
- commands that write to working tree files (core.sharedRepository
does not affect permission bits of working tree files),
e.g. .rej file created by "apply --reject", result of applying a
previous conflict resolution by "rerere", "git merge-file".
- git am, when splitting mails (git-am correctly cleans up its directory
after finishing, so there is no need to share those files between users)
- git submodule clone, when writing the .git file, because the file
will not be overwritten
- git_terminal_prompt() in compat/terminal.c, because it is not writing to
a file at all
- git diff --output, because the output file is clearly not intended to be
shared between the users of the current repository
- git fast-import, when writing a crash report, because the reports' file
names are unique due to an embedded process ID
- mailinfo() in mailinfo.c, because the output is clearly not intended to
be shared between the users of the current repository
- check_or_regenerate_marks() in remote-testsvn.c, because this is only
used for Git's internal testing
- git fsck, when writing lost&found blobs (this should probably be
changed, but left as a low-hanging fruit for future contributors).
Note that this patch does not touch callers of write_file() and
write_file_gently(), which would benefit from the same scrutiny as
to usage in shared repositories. Most notable users are branch,
daemon, submodule & worktree, and a worrisome call in transport.c
when updating one ref (which ignores the shared flag).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was pointed out by Yaroslav Halchenko that the file containing the
commit message is writable only by the owner, which means that we have
to rewrite it from scratch in a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
We sometimes use 32-bit unsigned integers as bit-fields.
It's fine to access the MSB, because it's unsigned. However,
doing so as "1 << 31" is wrong, because the constant "1" is
a signed int, and we shift into the sign bit, causing
undefined behavior.
We can fix this by using "1U" as the constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
The expression "!S_ISREG(ce)" covers i-t-a entries as well because
ce->ce_mode would be zero then. I could make a comment saying that, but
it's probably better just to comment with code, in case i-t-a entry
content changes in future.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If create_symref() fails, git-symbolic-ref will still exit
with code 0, and our caller has no idea that the command did
nothing.
This appears to have been broken since the beginning of time
(e.g., it is not a regression where create_symref() stopped
calling die() or something similar).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"format-patch" has learned a new option to zero-out the commit
object name on the mbox "From " line.
* bc/format-patch-null-from-line:
format-patch: check that header line has expected format
format-patch: add an option to suppress commit hash
sha1_file.c: introduce a null_oid constant
Add new config to avoid typing "--recurse-submodules" on each push.
* mc/push-recurse-submodules-config:
push: follow the "last one wins" convention for --recurse-submodules
push: test that --recurse-submodules on command line overrides config
push: add recurseSubmodules config option
"git push" takes "--delete" but does not take a short form "-d",
unlike "git branch" which does take both. Bring consistency
between them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line) how
many threads to use when searching in the working tree files.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the command to show progress output when it takes long time to
produce the first line of output; this option cannot be used with
"--incremental" or "--porcelain" options.
git-annotate inherits the option as well.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When show-in-pager option is used, threading is unconditionally
disabled, but this happened much earlier than the code that
determines the use of threading based on the operand (i.e. we do not
thread search in the object database). Consolidate the code to
disable threading to just one place.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we disabled threading when online_cpus() said "1", but on a
filesystem with long latency (or in a cold cache situation), using
multiple threads to drive I/O in parallel would improve performance
even on a single-core machines.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More transition from "unsigned char[40]" to "struct object_id".
This needed a few merge fixups, but is mostly disentangled from other
topics.
* bc/object-id:
remote: convert functions to struct object_id
Remove get_object_hash.
Convert struct object to object_id
Add several uses of get_object_hash.
object: introduce get_object_hash macro.
ref_newer: convert to use struct object_id
push_refs_with_export: convert to struct object_id
get_remote_heads: convert to struct object_id
parse_fetch: convert to use struct object_id
add_sought_entry_mem: convert to struct object_id
Convert struct ref to use object_id.
sha1_file: introduce has_object_file helper.
Code preparation for pluggable ref backends.
* dt/refs-backend-pre-vtable:
refs: break out ref conflict checks
files_log_ref_write: new function
initdb: make safe_create_dir public
refs: split filesystem-based refs code into a new file
refs/refs-internal.h: new header file
refname_is_safe(): improve docstring
pack_if_possible_fn(): use ref_type() instead of is_per_worktree_ref()
copy_msg(): rename to copy_reflog_msg()
verify_refname_available(): new function
verify_refname_available(): rename function
Use the "last one wins" convention for --recurse-submodules rather
than treating conflicting options as an error.
Also, fix the declaration of the file-scope recurse_submodules
global variable to put it on a separate line.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
We may want to do the same for .bitmap (and notice but not prune
.keep) without corresponding .pack, but that can be a separate
topic.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
Make "-h" command line option work more consistently in all commands.
* rs/parseopt-short-help:
show-ref: stop using PARSE_OPT_NO_INTERNAL_HELP
grep: stop using PARSE_OPT_NO_INTERNAL_HELP
parse-options: allow -h as a short option
parse-options: inline parse_options_usage() at its only remaining caller
parse-options: deduplicate parse_options_usage() calls
* maint:
http: treat config options sslCAPath and sslCAInfo as paths
Documentation/diff: give --word-diff-regex=. example
filter-branch: deal with object name vs. pathname ambiguity in tree-filter
check-ignore: correct documentation about output
git-p4: clean up after p4 submit failure
git-p4: work with a detached head
git-p4: add option to system() to return subshell status
git-p4: add failing test for submit from detached head
remote-http(s): support SOCKS proxies
t5813: avoid creating urls that break on cygwin
Escape Git's exec path in contrib/rerere-train.sh script
allow hooks to ignore their standard input stream
rebase-i-exec: Allow space in SHELL_PATH
Documentation: make environment variable formatting more consistent
Commit 1b0d400 refactored the prepare_final() function so
that it could be reused in multiple places. Originally, the
loop had two outputs: a commit to stuff into sb->final, and
the name of the commit from the rev->pending array.
After the refactor, that loop is put in its own function
with a single return value: the object_array_entry from the
rev->pending array. This contains both the name and the object,
but with one important difference: the object is the
_original_ object found by the revision parser, not the
dereferenced commit. If one feeds a tag to "git blame", we
end up casting the tag object to a "struct commit", which
causes a segfault.
Instead, let's return the commit (properly casted) directly
from the function, and take the "name" as an optional
out-parameter. This does the right thing, and actually
simplifies the callers, who no longer need to cast or
dereference the object_array_entry themselves.
[test case by Max Kirillov <max@max630.net>]
Signed-off-by: Jeff King <peff@peff.net>
The --recurse-submodules command line parameter has existed for some
time but it has no config file equivalent.
Following the style of the corresponding parameter for git fetch, let's
invent push.recurseSubmodules to provide a default for this
parameter. This also requires the addition of --recurse-submodules=no to
allow the configuration to be overridden on the command line when
required.
The most straightforward way to implement this appears to be to make
push use code in submodule-config in a similar way to fetch.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Jeff King <peff@peff.net>
The flag PARSE_OPT_NO_INTERNAL_HELP is set to allow overriding the
option -h, except when it's the only one given. This is the default
behavior now, so remove the flag and the hand-rolled --help-all
handling. The internal --help-all handler now actually shows hidden
options, i.e. -h in this case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
The flag PARSE_OPT_NO_INTERNAL_HELP is set to allow overriding the
option -h, except when it's the only one given. This is the default
behavior now, so remove the flag and the hand-rolled --help-all
handling. The internal --help-all handler now actually shows hidden
options, i.e. --debug in this case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert ref_newer and its caller to use struct object_id instead of
unsigned char *.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert this function to use struct object_id. Express several
hardcoded constants in terms of GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Extend transfer.hideRefs to work better with use of namespaces.
* lf/ref-is-hidden-namespace:
t5509: add basic tests for hideRefs
hideRefs: add support for matching full refs
upload-pack: strip refs before calling ref_is_hidden()
config.txt: document the semantics of hideRefs with namespaces
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
Soon we will want to create initdb functions for ref backends, and
code from initdb that calls this function needs to move into the files
backend. So this function needs to be public.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Since ec7dbd145 (receive-pack: allow hooks to ignore its
standard input stream) the pre-receive and post-receive
hooks ignore SIGPIPE. Do the same for the remaining hooks
pre-push and post-rewrite, which read from standard input.
The same arguments for ignoring SIGPIPE apply.
Include test by Jeff King which checks that SIGPIPE does not
cause pre-push hook failure. With the use of git update-ref
--stdin it is fast enough to be enabled by default.
Signed-off-by: Clemens Buchacher <clemens.buchacher@intel.com>
Signed-off-by: Jeff King <peff@peff.net>
"git checkout" did not follow the usual "--[no-]progress"
convention and implemented only "--quiet" that is essentially
a superset of "--no-progress". Extend the command to support the
usual "--[no-]progress".
* ea/checkout-progress:
checkout: add --progress option
Various compilation fixes and squelching of warnings.
* js/misc-fixes:
Correct fscanf formatting string for I64u values
Silence GCC's "cast of pointer to integer of a different size" warning
Squelch warning about an integer overflow
"git --literal-pathspecs add -u/-A" without any command line
argument misbehaved ever since Git 2.0.
* jc/add-u-A-default-to-top:
add: simplify -u/-A without pathspec
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
In addition to matching stripped refs, one can now add hideRefs
patterns that the full (unstripped) ref is matched against. To
distinguish between stripped and full matches, those new patterns
must be prefixed with a circumflex (^).
This commit also removes support for the undocumented and unintended
hideRefs settings ".have" (suppressing all "have" lines) and
"capabilities^{}" (suppressing the capabilities line).
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a custom report_garbage handler to collect and remove
garbage .idx files from the pack directory.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message from "git blame --contents --reverse" incorrectly
talked about "--contents --children".
* mk/blame-error-message:
blame: fix option name in error message
"git merge-file" tried to signal how many conflicts it found, which
obviously would not work well when there are too many of them.
* jk/merge-file-exit-code:
merge-file: clamp exit code to maximum 127
"git am -3" had a small regression where it is aborted in its error
handling codepath when underlying merge-recursive failed in certain
ways, as it assumed that the internal call to merge-recursive will
never die, which is not the case (yet).
* jc/am-3-fallback-regression-fix:
am -3: do not let failed merge from completing the error codepath
The synopsis text and the usage string of subcommands that read
list of things from the standard input are often shown as if they
only take input from a file on a filesystem, which was misleading.
* jc/usage-stdin:
usage: do not insist that standard input must come from a file
A couple of commands still showed "[options]" in their usage string
to note where options should come on their command line, but we
spell that "[<options>]" in most places these days.
* rt/placeholder-in-usage:
am, credential-cache: add angle brackets to usage string
