23a64c9e (conflict-marker-size: new attribute, 2010-01-16) introduced the
new attribute and also pass the conflict marker size as %L to merge driver
commands. This documents the substitution.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we look at a patch for adding hunks interactively, we
first split it into a header and a list of hunks. Some of
the header lines, such as mode changes and deletion, however,
become their own selectable hunks. Later when we reassemble
the patch, we simply concatenate the header and the selected
hunks. This leads to patches like this:
diff --git a/file b/file
index d95f3ad..0000000
--- a/file
+++ /dev/null
deleted file mode 100644
@@ -1 +0,0 @@
-content
Notice how the deletion comes _after_ the ---/+++ lines,
when it should come before.
In many cases, we can get away with this as git-apply
accepts the slightly bogus input. However, in the specific
case of a deletion line that is being applied via "apply
-R", this malformed patch triggers an assert in git-apply.
This comes up when discarding a deletion via "git checkout
-p".
Rather than try to make git-apply accept our odd input,
let's just reassemble the patch in the correct order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to unnecessarily give the read permission to group and others,
regardless of the umask, which isn't serious because the objects are
still protected by their containing directory, but isn't necessary
either.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reaching the end of git_mkstemps_mode, at least one call to open()
has been done, and errno has been set accordingly. Setting errno is
therefore not necessary, and actually harmfull since callers can't
distinguish e.g. permanent failure from ENOENT, which can just mean that
we need to create the containing directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to create 0600 files, and then use chmod to set the group and
other permission bits to the umask. This usually has the same effect
as a normal file creation with a umask.
But in the presence of ACLs, the group permission plays the role of
the ACL mask: the "g" bits of newly created files are chosen according
to default ACL mask of the directory, not according to the umask, and
doing a chmod() on these "g" bits affect the ACL's mask instead of
actual group permission.
In other words, creating files with 0600 and then doing a chmod to the
umask creates files which are unreadable by users allowed in the
default ACL. To create the files without breaking ACLs, we let the
umask do it's job at the file's creation time, and get rid of the
later chmod.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitmkstemps emulates the behavior of mkstemps, which is usually used
to create files in a shared directory like /tmp/, hence, it creates
files with permission 0600.
Add git_mkstemps_mode() that allows us to specify the desired mode, and
make git_mkstemps() a wrapper that always uses 0600 to call it. Later we
will use git_mkstemps_mode() when creating pack files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function used to be only a compatibility function, but we're
going to extend it and actually use it, so make it part of Git.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, Git creates unreadable pack files on non-shared
repositories when the user has a umask of 077, even when the default
ACLs for the directory would give read/write access to a specific
user.
Loose object files are created world-readable, which doesn't break ACLs,
but isn't necessarily desirable.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pagers that do not consume their input are dangerous: for example,
$ GIT_PAGER=: git log
$ echo $?
141
$
The only reason these tests were able to work before was that
'git log' would write to the pipe (and not fill it) before the
pager had time to terminate and close the pipe.
Fix it by using a program that consumes its input, namely wc (as
suggested by Johannes).
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't want the data being deflated and stored into loose objects
to be different from what we expect. While the deflated data is
protected by a CRC which is good enough for safe data retrieval
operations, we still want to be doubly sure that the source data used
at object creation time is still what we expected once that data has
been deflated and its CRC32 computed.
The most plausible data corruption may occur if the source file is
modified while Git is deflating and writing it out in a loose object.
Or Git itself could have a bug causing memory corruption. Or even bad
RAM could cause trouble. So it is best to make sure everything is
coherent and checksum protected from beginning to end.
To do so we compute the SHA1 of the data being deflated _after_ the
deflate operation has consumed that data, and make sure it matches
with the expected SHA1. This way we can rely on the CRC32 checked by
the inflate operation to provide a good indication that the data is still
coherent with its SHA1 hash. One pathological case we ignore is when
the data is modified before (or during) deflate call, but changed back
before it is hashed.
There is some overhead of course. Using 'git add' on a set of large files:
Before:
real 0m25.210s
user 0m23.783s
sys 0m1.408s
After:
real 0m26.537s
user 0m25.175s
sys 0m1.358s
The overhead is around 5% for full data coherency guarantee.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds two test cases for:
6977c25 git diff --quiet -w: check and report the status
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using read() instead of mmap() can be 39% speed up for 1Kb files and is
1% speed up 1Mb files. For larger files, it is better to use mmap(),
because the difference between is not significant, and when there is not
enough memory, mmap() performs much better, because it avoids swapping.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no real advantage to malloc the whole output buffer and
deflate the data in a single pass when writing loose objects. That is
like only 1% faster while using more memory, especially with large
files where memory usage is far more. It is best to deflate and write
the data out in small chunks reusing the same memory instead.
For example, using 'git add' on a few large files averaging 40 MB ...
Before:
21.45user 1.10system 0:22.57elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+142640minor)pagefaults 0swaps
After:
21.50user 1.25system 0:22.76elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+104408minor)pagefaults 0swaps
While the runtime stayed relatively the same, the number of minor page
faults went down significantly.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Testing pagination requires (fake or real) access to a terminal so we
can see whether the pagination automatically kicks in, which makes it
hard to get good coverage when running tests without --verbose. There
are a number of ways to work around that:
- Replace all isatty calls with calls to a custom xisatty wrapper
that usually checks for a terminal but can be overridden for tests.
This would be workable, but it would require implementing xisatty
separately in three languages (C, shell, and perl) and making sure
that any code that is to be tested always uses the wrapper.
- Redirect stdout to /dev/tty. This would be problematic because
there might be no terminal available, and even if a terminal is
available, it might not be appropriate to spew output to it.
- Create a new pseudo-terminal on the fly and capture its output.
This patch implements the third approach.
The new test-terminal.perl helper uses IO::Pty from Expect.pm to create
a terminal and executes the program specified by its arguments with
that terminal as stdout. If the IO::Pty module is missing or not
working on a system, the test script will maintain its old behavior
(skipping most of its tests unless GIT_TEST_OPTS includes --verbose).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --cherry-pick logic starts by counting the commits on each side,
so that it can filter away commits on the bigger one. However, so
far it missed an opportunity for optimization: it doesn't need to do
any work if either side is empty.
This in particular helps the common use-case 'git rebase -i HEAD~$n':
it internally uses --cherry-pick, but since HEAD~$n is a direct
ancestor the left side is always empty.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git’s automatic pagination support has some subtleties. Add some
tests to make sure we don’t break:
- when git will use a pager by default;
- the effect of the --paginate and --no-pager options;
- the effect of pagination on use of color;
- how the choice of pager is configured.
This does not yet test:
- use of pager by scripted commands (git svn and git am);
- effect of the pager.* configuration variables;
- setting of the LESS variable.
Some features involve checking whether stdout is a terminal, so many
of these tests are skipped unless output is passed through to the
terminal (i.e., unless $GIT_TEST_OPTS includes --verbose).
The immediate purpose for these tests was to avoid making things worse
after the breakage from my jn/editor-pager series (see commit 376f39,
2009-11-20). Thanks to Sebastian Celis <sebastian@sebastiancelis.com>
for the report.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation suggests that --local also ignores any
objects in local packs, which is incorrect. Change the language to be
clearer and more parallel to the other options that ignore objects.
While we're at it, fix a trivial error in --incremental's
documentation.
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
is_utf8() works by calling utf8_width() for each character at the
supplied location. In strbuf_add_wrapped_text(), we do that anyway
while wrapping the lines. So instead of checking the encoding
beforehand, optimistically assume that it's utf-8 and wrap along
until an invalid character is hit, and when that happens start over.
This pays off if the text consists only of valid utf-8 characters.
The following command was run against the Linux kernel repo with
git 1.7.0:
$ time git log --format='%b' v2.6.32 >/dev/null
real 0m2.679s
user 0m2.580s
sys 0m0.100s
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m4.342s
user 0m4.230s
sys 0m0.110s
And with this patch series:
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m3.741s
user 0m3.630s
sys 0m0.110s
So the cost of wrapping is reduced to 70% in this case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch before the previous one made sure that all callers of
strbuf_add_wrapped_text() supply a strbuf. Replace all calls of
strbuf_write() with regular strbuf functions and remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch made sure that strbuf_add_wrapped_text() (and thus
strbuf_add_indented_text(), too) always get a strbuf. Make use of
this fact by adding strbuf_addchars(), a small helper that adds a
char the specified number of times to a strbuf, and use it to replace
print_spaces().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_add_wrapped_text() is called only from print_wrapped_text()
without a strbuf (in which case it writes its results to stdout).
At its only callsite, supply a strbuf, call strbuf_add_wrapped_text()
directly and remove the wrapper function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix inadvertent breakage from b932705 (git-p4: stream from perforce to
speed up clones, 2009-07-30) in the code that strips the trailing '\n'
from p4 print on a symlink. (In practice, contents is of the form
['target\n', ''].)
Signed-off-by: Evan Powers <evan.powers@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Almost exactly a year ago in 02a6552 (Test fsck a bit harder), I
introduced two testcases that were expecting failure.
However, the only bug was that the testcases wrote *blobs* because I
forgot to pass -t tag to hash-object. Fix this, and then adjust the
rest of the test to properly check the result.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the "See linkgit:git-config[1]..." paragraph was added to the
description for --untracked-files (d6293d1), the paragraphs for the
following options were indented at the same level as the "See
linkgit:git-config[1]" paragraph. This problem showed up in the
manpages, but not in the HTML documentation.
While this does fix the alignment of the options following
--untracked-files in the manpage, the "See linkgit..." portion of the
description does not retain its previous indentation level in the
manpages, or HTML documentation.
Signed-off-by: Jacob Helwig <jacob.helwig@gmail.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we remove a path in a/deep/subdirectory, we should try to
remove as many trailing components as possible (i.e.,
subdirectory, then deep, then a). However, the test for the
return value of rmdir was reversed, so we only ever deleted
at most one level.
The fix is in remove_path, so "apply" and "merge-recursive"
also are fixed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for --thin was misleading and downright wrong. Correct
it with some inspiration from the description of index-pack's --fix-thin
and some background information from Nicolas Pitre <nico@fluxnic.net>.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/cherry-pick-reword:
cherry-pick: prettify the advice message
cherry-pick: show commit name instead of sha1
cherry-pick: format help message as strbuf
cherry-pick: refactor commit parsing code
cherry-pick: rewrap advice message
This let diff_delta() abort early if it is going to bust the given
size limit. Also, only objects larger than 20 bytes are considered
as objects smaller than that are most certainly going to produce
larger deltas than the original object due to the additional headers.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that fast-import is creating packs with index version 2, there is
no point limiting the pack size by default. A pack split will still
happen if off_t is not sufficiently large to hold large offsets.
While updating the doc, let's remove the "packfiles fit on CDs"
suggestion. Pack files created by fast-import are still suboptimal and
a 'git repack -a -f -d' or even 'git gc --aggressive' would be a pretty
good idea before considering storage on CDs.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows for the creation of pack index version 2 with its object
CRC and the possibility for a pack to be larger than 4 GB.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for using write_idx_file(). Also, by using
sha1write() we get some buffering to reduces the number of write
syscalls, and the written data is SHA1 summed which allows for the extra
data integrity validation check performed in fixup_pack_header_footer()
(details on this in commit abeb40e5aa).
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With NONGIT_OK set, require_work_tree function outside a git repository
gives a syntax error. This is caused by an incorrect use of "test" that
didn't anticipate $(git rev-parse --is-inside-work-tree) may return an
empty string.
Properly quote the argument to "test", and send the standard error stream
to /dev/null to avoid giving duplicate error messages.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that git-grep(1) searches only tracked files, and that each
<pathspec> is a pathspec, as in any other ordinary git commands.
Add an example to show a simple use case for searching all .c and .h
files in the current directory and below.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program can decide at runtime not to use threading even if the support
is compiled in. In such a case, mutexes are not necessary and left
uninitialized. But the code incorrectly tried to take and release the
read_sha1_mutex unconditionally.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Fredrik Kuivinen <frekui@gmail.com>
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
transport_get_remote_refs() in tranport.c checks transport->remote_refs
to determine whether transport->get_refs_list() should be invoked. The
logic is "if it is NULL, we haven't run ls-remote to find out yet".
However, transport->remote_refs could still be NULL while cloning from
an empty repository. This causes get_refs_list() to be run unnecessarily.
Introduce a flag, transport->got_remote_refs, to more explicitly record
if we have run transport->get_refs_list() already.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we encounter a symref that is dangling, in most cases we will warn
about it. The one exception is a dangling HEAD, as that indicates a
branch yet to be born.
However, the check in dwim_ref was not quite right. If we were fed
something like "HEAD^0" we would try to resolve "HEAD", see that it is
dangling, and then check whether the _original_ string we got was
"HEAD" (which it wasn't in this case). And that makes no sense; the
dangling thing we found was not "HEAD^0" but rather "HEAD".
Fixing this squelches a scary warning from "submodule summary HEAD" (and
consequently "git status" with status.submodulesummary set) in an empty
repo, as the submodule script calls "git rev-parse -q --verify HEAD^0".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option -w tells the diff machinery to inspect the contents to set the
exit status, instead of checking the blob object level difference alone.
However, --quiet tells the diff machinery not to look at the contents, which
means DIFF_FROM_CONTENTS has no chance to inspect the change.
Work it around by calling diff_flush_patch() with output sent to /dev/null.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
