Previously, we set the GIT_CONFIG environment variable in
our tests so that only that file was read. However, setting
it to a static value is not correct, since we are not
necessarily always in the same directory; instead, we want
the usual git config file lookup to happen.
To do this, we stop setting GIT_CONFIG, which means that we
must now suppress the reading of the system-wide and user
configs.
This exposes an incorrect test in t1500, which is also
fixed (the incorrect test worked because we were failing to
read the core.bare value from the config file, since the
GIT_CONFIG variable was pointing us to the wrong file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have known breakages, we still said "passed all N
test(s)", which was a bit funny.
This rewords it to read "passed all remaining N test(s)" in such
a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes a spurious "command not found" error
and actually makes the "Test script did not set test_description."
string follow the command line option "--no-color".
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shuts down the "* ok ##: `test description`" messages.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make every test executable. Remove exec-attribute from included shell files,
they can't used standalone anyway.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
test-lib:
Make sure test-chmtime has been built before starting.
t4200-rerere:
Removed non-portable date dependency and avoid touch
Avoid "test -a" which isn't portable, either
lib-git-svn:
Use test-chmtime instead of Perl one-liner to poke
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was done by setting $HOME to somewhere bogus. A better method is
to reuse $GIT_CONFIG, which was invented for ignoring the global
config file explicitely.
Technically, setting GIT_CONFIG=.git/config could be wrong, but it
passes all the tests, and we can keep the tests that way.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its really nice to be able to run a test with -v and automatically
see the "debugging" dump from merge-recursive, especially if we
are actually trying to debug merge-recursive.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier test timestamp was too old; I forgot that the bare
unixtime integer had to be after Jan 1, 2000. This changes
test_tick to use the git-epoch timestamp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that this reveals anything new, but I did test_tick shell
function in test-lib and found it rather cute and nice.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some environments, certain tests have no way of succeeding
due to platform limitation, such as lack of 'unzip' program, or
filesystem that do not allow arbitrary sequence of non-NUL bytes
as pathnames.
You should be able to say something like
$ cd t
$ GIT_SKIP_TESTS=t9200.8 t9200-git-cvsexport-commit.sh
and even:
$ GIT_SKIP_TESTS='t[0-4]??? t91?? t9200.8' make test
to omit such tests. The value of the environment variable is a
SP separated list of patterns that tells which tests to skip,
and either can match the "t[0-9]{4}" part to skip the whole
test, or t[0-9]{4} followed by ".$number" to say which
particular test to skip.
Note that some tests in the existing test suite rely on previous
test item, so you cannot arbitrarily disable one and expect the
remainder of test to check what the test originally was intended
to check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I don't think anybody running tests needs to know they're
running init-db and creating a repository for testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of passing --template explicitely to init-db and clone, you can
just set the environment variable GIT_TEMPLATE_DIR.
Also make use of it in the tests, to make sure that the templates are
copied.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 74d20040ca.
Version from Johannes to introduce GIT_TEMPLATE_DIR is simpler,
although I unconsciously stayed away from introducing yet another
environment variable.
The initial t/trash repository for testing was created properly
but over time we gained many tests that create secondary test
repositories with init-db or clone and they were not careful
enough.
This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When test_expect_failure detects that a command failed, it still has to
treat a program that crashed from a signal as unexpected failure.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When running tests with --verbose it is difficult to see where
one test starts and where it ends because everything is printed
in one big lump.
Fix that by printing one single newline between each test.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/gitpm: (52 commits)
Remove -fPIC which was only needed for Git.xs
Git.pm: Kill Git.xs for now
Revert "Make it possible to set up libgit directly (instead of from the environment)"
Revert "Git.pm: Introduce fast get_object() method"
Revert "Convert git-annotate to use Git.pm"
Fix compilation with Sun CC
pass DESTDIR to the generated perl/Makefile
Eliminate Scalar::Util usage from private-Error.pm
Convert git-annotate to use Git.pm
Git.pm: Introduce fast get_object() method
Make it possible to set up libgit directly (instead of from the environment)
Work around sed and make interactions on the backslash at the end of line.
Git.pm: Introduce ident() and ident_person() methods
Convert git-send-email to use Git.pm
Git.pm: Add config() method
Use $GITPERLLIB instead of $RUNNING_GIT_TESTS and centralize @INC munging
INSTALL: a tip for running after building but without installing.
Perly Git: make sure we do test the freshly built one.
Git.pm: Don't #define around die
Git.xs: older perl do not know const char *
...
This renames merge-recursive written in Python to merge-recursive-old,
and makes merge-recur as a synonym to merge-recursive. We do not remove
merge-recur yet, but we will remove merge-recur and merge-recursive-old
in a few releases down the road.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When there are single-character filenames in the test directory,
the shell tries to expand regexps meant for tr.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
This way we don't have to remember to set it for each test; and
if we forget, we won't cause interactive editors to be spawned
for non-interactive tests.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the Git perl scripts check $GITPERLLIB instead of
$RUNNING_GIT_TESTS, which makes more sense if you are setting up your shell
environment to use a non-installed Git instance.
It also weeds out the @INC munging from the individual scripts and makes
Makefile add it during the .perl files processing, so that we can change
just a single place when we modify this shared logic. It looks ugly in the
scripts, too. ;-)
And instead of doing arcane things with the @INC array, we just do 'use lib'
instead, which is essentialy the same thing anyway.
I first want to do three separate patches but it turned out that it's quite
a lot neater when bundled together, so I hope it's ok.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We could BEGIN { push @INC, '@@INSTLIBDIR@@'; } but that is not
a good idea for normal execution. The would prevent a
workaround for a user who is trying to override an old, faulty
Git.pm installed on the system path with a newer version
installed under $HOME/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some setups (notably server setups) you do not need that dependency.
Gracefully handle the absence of python when NO_PYTHON is defined.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without these, running tests with an account with empty gecos
field would fail.
We might want to loosen error from "git-var -l" (but not
"git-var GIT_AUTHOR_NAME") later, but that is more or less an
independent issue.
Signed-off-by: Junio C Hamano <junkio@cox.net>
and was successfully entered. Otherwise git-init-db will create it directly
in the working directory (t/) which can be dangerous.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When .git/refs/heads/frotz and .git/refs/tags/frotz existed, and
the object name stored in .git/refs/heads/frotz were corrupt, we
ended up picking tags/frotz without complaining. Worse yet, if
the corrupt .git/refs/heads/frotz was more than 40 bytes and
began with hexadecimal characters, it silently overwritten the
initial part of the returned result.
This commit adds a couple of tests to demonstrate these cases,
with a fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
People seem to be getting test failure from t6021 not becuase
git is faulty but because they forgot to install "merge". Check
this and other trivial pilot errors in the first test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just a belts-and-suspenders check, but makes sure we
have both "git" and "git-init-db" built, executable, and
checking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to catch an error where tests are run without first
building what are being tested. Relying on prefixing $PATH with
the build directory and expect that the PATH mechanism would
find what we just built would silently run an already installed
binaries from the PATH.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The test is considered OK if it exits with code $1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Individual tests for hooks would want to have their own tests when
written. Also we should not pick up from random templates the user
happens to have.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"return" from a test would leave the exit trap set, which could cause a
spurious error message if it's the last test in the script or
--immediate is used.
The easiest solution would be to have a global trap that is set when
test-lib.sh is sourced and unset either by test_done(), error() or by
test_failure_() with --immediate.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I have noticed that "make test" fails without any explanations when the
"merge" utility is missing. I don't think tests should be silent in
case of failure.
It turned out that the particular test was using "exit" to interrupt the
test in case of an error. This caused the whole test script to exit.
No further tests would be run even if "--immediate" wasn't specified.
No error message was printed.
This patch does following:
All instances of "exit", "exit 1" and "(exit 1)" in tests have been
replaced with "return 1". In fact, "(exit 1)" had no effect.
File descriptor 5 is duplicated from file descriptor 1. This is needed
to print important error messages from tests.
New function test_run_() has been introduced. Any "return" in the test
would merely cause that function to return without skipping calls to
test_failure_() and test_ok_(). The new function also traps "exit" and
treats it like a fatal error (in case somebody reintroduces "exit" in
the tests).
test_expect_failure() and test_expect_success() check both the result of
eval and the return value of test_run_(). If the later is not 0, it's
always a failure because it indicates the the test didn't complete.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"t5400-send-pack.sh --verbose" stops waiting for user input. It happens
because "git log" uses less for output now. To prevent this, PAGER
should be set to cat.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The output from a failure case had the test description message
and the first line of the actual test script concatenated on the
same line, which was ugly. Correct the output routine a bit to
make it more readable.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Exposing test_expect_success and test_expect_failure turns out
to be enough for the test scripts and there is no need for
exposing test_ok or test_failure. This patch cleans it up and
fixes the users of test_ok and test_failure.
Also test scripts have acquired a new command line flag
'--immediate' to cause them to exit upon the first failure.
This is useful especially during the development of a new test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
NO changed to FAIL and ok was right-aligned with it so that it is easier
to visually identify the failed tests, and the removal of # should reduce
the clutter on the line and aid the eye to spot the test number better.
This adds t/ directory to host test suite, a test helper
library and a basic set of tests.
Petr Baudis raised many valid points at the earlier attempts in
git mailing list. This round, test-lib.sh has been updated to a
bit more modern style, and the default output is made easier to
read. Also included is one sample test script that tests the
very basics. This test has already found one leftover bug
missed when we introduced symlink support, which has been fixed
since then. The supplied Makefile is designed to run all the
available tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
