Some callers of xdi_diff_outf() do not look at the generated hunk header
lines at all. By plugging in a no-op hunk callback, this tells xdiff not
to even bother formatting them.
This patch introduces a stock no-op callback and uses it with a few
callers whose line callbacks explicitly ignore hunk headers (because
they look only for +/- lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught xdiff to optionally provide the hunk header
data to a specialized callback. But most users of xdiff actually use our
more convenient xdi_diff_outf() helper, which ensures that our callbacks
are always fed whole lines.
Let's plumb the special hunk-callback through this interface, too. It
will follow the same rule as xdiff when the hunk callback is NULL (i.e.,
continue to pass a stringified hunk header to the line callback). Since
we add NULL to each caller, there should be no behavior change yet.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is apparently undefined behavior to call `regfree()` on a regex where
`regcomp()` failed. The language in [1] is a bit muddy, at least to me,
but the clearest hint is this (`preg` is the `regex_t *`):
Upon successful completion, the regcomp() function shall return 0.
Otherwise, it shall return an integer value indicating an error as
described in <regex.h>, and the content of preg is undefined.
Funnily enough, there is also the `regerror()` function which should be
given a pointer to such a "failed" `regex_t` -- the content of which
would supposedly be undefined -- and which may investigate it to come up
with a detailed error message.
In any case, the example in that document shows how `regfree()` is not
called after `regcomp()` fails.
We have quite a few users of this API and most get this right. These
three users do not.
Several implementations can handle this just fine [2] and these code paths
supposedly have not wreaked havoc or we'd have heard about it. (These
are all in code paths where git got bad input and is just about to die
anyway.) But let's just avoid the issue altogether.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/regcomp.html
[2] https://www.redhat.com/archives/libvir-list/2013-September/msg00262.html
Researched-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-byi Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In f506b8e8b5 (git log/diff: add -G<regexp> that greps in the patch text,
2010-08-23) we were hesitant to check if the user requests both -S and
-G at the same time. Now that the pickaxe family also offers --find-object,
which looks slightly more different than the former two, let's add a check
that those are not used at the same time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
One might be tempted to extend git-describe to also work with blobs,
such that `git describe <blob-id>` gives a description as
'<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer
number of responses (>110), it turns out this is tricky to get right.
The hard part to get right is picking the correct 'commit-ish' as that
could be the commit that (re-)introduced the blob or the blob that
removed the blob; the blob could exist in different branches.
Junio hinted at a different approach of solving this problem, which this
patch implements. Teach the diff machinery another flag for restricting
the information to what is shown. For example:
$ ./git log --oneline --find-object=v2.0.0:Makefile
b2feb64309 Revert the whole "ask curl-config" topic for now
47fbfded53 i18n: only extract comments marked with "TRANSLATORS:"
we observe that the Makefile as shipped with 2.0 was appeared in
v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The
reason why these commits both occur prior to v2.0.0 are evil
merges that are not found using this new mechanism.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
[2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently flags for pickaxing are found in different places. Unify the
flags into the `pickaxe_opts` field, which will contain any pickaxe related
flags.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result
of out-of-bounds memory reads.
diffcore-pickaxe.c:contains() looks for all matches of the given regex
in a buffer in a loop, advancing the buffer pointer to the end of the
last match in each iteration. When we switched to REG_STARTEND in
b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing
the size of that buffer to the regexp engine, too. Unfortunately,
this buffer size is never updated on subsequent iterations, and as the
buffer pointer advances on each iteration, this "bufptr+bufsize"
points past the end of the buffer. This results in segmentation
fault, if that memory can't be accessed. In case of 'git log' it can
also result in erroneously listed commits, if the memory past the end
of buffer is accessible and happens to contain data matching the
regex.
Reduce the buffer size on each iteration as the buffer pointer is
advanced, thus maintaining the correct end of buffer location.
Furthermore, make sure that the buffer pointer is not dereferenced in
the control flow statements when we already reached the end of the
buffer.
The new test is flaky, I've never seen it fail on my Linux box even
without the fix, but this is expected according to db5dfa3 (regex:
-G<pattern> feeds a non NUL-terminated string to regexec() and fails,
2016-09-21). However, it did fail on Travis CI with the first (and
incomplete) version of the fix, and based on that commit message I
would expect the new test without the fix to fail most of the time on
Windows.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
The new regexec_buf() function operates on buffers with an explicitly
specified length, rather than NUL-terminated strings.
We need to use this function whenever the buffer we want to pass to
regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated).
Note: the original motivation for this patch was to fix a bug where
`git diff -G <regex>` would crash. This patch converts more callers,
though, some of which allocated to construct NUL-terminated strings,
or worse, modified buffers to temporarily insert NULs while calling
regexec(3). By converting them to use regexec_buf(), the code has
become much cleaner.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the "grep -F -i" case, we can't use kws on icase search
outside ascii range, so we quote the string and pass it to regcomp as
a basic regexp and let regex engine deal with case sensitivity.
The new test is put in t7812 instead of t4209-log-pickaxe because
lib-gettext.sh might cause problems elsewhere, probably.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's another regcomp code block coming in this function that needs
the same error handling. This function can help avoid duplicating
error handling code.
Helped-by: Jeff King <peff@peff.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call into xdiff to perform a diff, we generally lose
the return code completely. Typically by ignoring the return
of our xdi_diff wrapper, but sometimes we even propagate
that return value up and then ignore it later. This can
lead to us silently producing incorrect diffs (e.g., "git
log" might produce no output at all, not even a diff header,
for a content-level diff).
In practice this does not happen very often, because the
typical reason for xdiff to report failure is that it
malloc() failed (it uses straight malloc, and not our
xmalloc wrapper). But it could also happen when xdiff
triggers one our callbacks, which returns an error (e.g.,
outf() in builtin/rerere.c tries to report a write failure
in this way). And the next patch also plans to add more
failure modes.
Let's notice an error return from xdiff and react
appropriately. In most of the diff.c code, we can simply
die(), which matches the surrounding code (e.g., that is
what we do if we fail to load a file for diffing in the
first place). This is not that elegant, but we are probably
better off dying to let the user know there was a problem,
rather than simply generating bogus output.
We could also just die() directly in xdi_diff, but the
callers typically have a bit more context, and can provide a
better message (and if we do later decide to pass errors up,
we're one step closer to doing so).
There is one interesting case, which is in diff_grep(). Here
if we cannot generate the diff, there is nothing to match,
and we silently return "no hits". This is actually what the
existing code does already, but we make it a little more
explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inlining the variable "found" actually makes the code shorter and
easier to read.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to determine the search term's length only when fixed-string
matching is used; regular expression compilation takes a NUL-terminated
string directly. Only call strlen() in the former case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pickaxe() calls pickaxe_match(); moving the definition of the former
after the latter allows us to do without an explicit function
declaration.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore_pickaxe_count() initializes the regular expression or kwset for
the search term, calls pickaxe() with the callback has_changes() and
cleans up afterwards. diffcore_pickaxe_grep() does the same, only it
doesn't support kwset and uses the callback diff_grep() instead. Merge
the two functions to form the new diffcore_pickaxe() and thus get rid of
the duplicate regex setup and cleanup code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
accccde4 (pickaxe: allow -i to search in patch case-insensitively)
allowed case-insenitive matching for -G and -S, but for the latter
only if fixed string matching is used. Allow it for -S and regular
expression matching as well to make the support complete.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Halve the number of callsites of contains() to two using temporary
variables, simplifying the code. While at it, get rid of the
diff_options parameter, which became unused with 8fa4b09f.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, diffcore-pickaxe reports two distinct errors for the same
user error:
$ git log --pickaxe-regex -S'\1'
fatal: invalid pickaxe regex: Invalid back reference
$ git log -G'\1'
fatal: invalid log-grep regex: Invalid back reference
This "log-grep" was only an internal name for the -G feature during
development, and invite confusion with "git log --grep=<pattern>".
Change the error messages to say "invalid regex".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic flow of has_changes() used for "log -S" and diff_grep()
used for "log -G" are essentially the same. See if we have both
sides that could be different in any interesting way, slurp the
contents in core, possibly after applying textconv, inspect the
contents, clean-up and report the result. The only difference
between the two is how "inspect" step works.
Unify this codeflow in a helper, pickaxe_match(), which takes a
callback function that implements the specific "inspect" step.
After removing the common scaffolding code from the existing
has_changes() and diff_grep(), they each becomes such a callback
function suitable for passing to pickaxe_match().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff_grep() and has_changes() functions had early return
codepaths for unmerged filepairs, which simply returned 0. When we
taught textconv filter to them, one was ignored and continued to
return early without freeing the result filtered by textconv, and
the other had a failed attempt to fix, which allowed the planned
return value 0 to be overwritten by a bogus call to contains().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two functions are called in the same codeflow to implement
"log -S<block>" and "log -G<pattern>", respectively, but the latter
lacked two obvious optimizations the former implemented, namely:
- When a pickaxe limit is not given at all, they should return
without wasting any cycle;
- When both sides of the filepair are the same, and the same
textconv conversion apply to them, return early, as there will be
no interesting differences between the two anyway.
Also release the filespec data once the processing is done (this is
not about leaking memory--it is about releasing data we finished
looking at as early as possible).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fill_one is _almost_ identical to just calling fill_textconv; the
exception is that for the !DIFF_FILE_VALID case, fill_textconv gives us
an empty buffer rather than a NULL one. Since we currently use the NULL
pointer as a signal that the file is not present on one side of the
diff, we must now switch to using DIFF_FILE_VALID to make the same
check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fill_one() function is responsible for finding and filling the
textconv filter as necessary, and is called by diff_grep() function
that implements "git log -G<pattern>".
The has_changes() function that implements "git log -S<block>" calls
get_textconv() for two sides being compared, before it checks to see
if it was asked to perform the pickaxe limiting. Move the code
around to avoid this wastage.
After has_changes() calls get_textconv() to obtain textconv for both
sides, fill_one() is called to use them.
By adding get_textconv() to diff_grep() and relieving fill_one() of
responsibility to find the textconv filter, we can avoid calling
get_textconv() twice in has_changes().
With this change it's also no longer necessary for fill_one() to
modify the textconv argument, therefore pass a pointer instead of a
pointer to a pointer.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently just look at raw blob data when using "-S" to
pickaxe. This is mostly historical, as pickaxe predates the
textconv feature. If the user has bothered to define a
textconv filter, it is more likely that their search string will be
on the textconv output, as that is what they will see in the
diff (and we do not even provide a mechanism for them to
search for binary needles that contain NUL characters).
This patch teaches "-S" to use textconv, just as we
already do for "-G".
Signed-off-by: Jeff King <peff@peff.net>
If we are given an empty pickaxe needle like "git log -S ''",
it is impossible for us to find anything (because no matter
what the content, the count will always be 0). We currently
check this at the lowest level of contains(). Let's hoist
the logic much earlier to has_changes(), so that it is
simpler to return our answer before loading any blob data.
Signed-off-by: Jeff King <peff@peff.net>
If you use "-G" to grep a diff, we will apply a configured
textconv filter to the data before generating the diff.
However, if the diff is an addition or deletion, we do not
bother running the diff at all, and just look for the token
in the added (or removed) content. This works because we
know that the diff must contain every line of content.
However, while we used the textconv-derived buffers in the
regular diff, we accidentally passed the original unmodified
buffers to regexec when checking the added or removed
content. This could lead to an incorrect answer.
Worse, in some cases we might have a textconv buffer but no
original buffer (e.g., if we pulled the textconv data from
cache, or if we reused a working tree file when generating
it). In that case, we could actually feed NULL to regexec
and segfault.
Reported-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Jeff King <peff@peff.net>
"git log -S<string>" is a useful way to find the last commit in the
codebase that touched the <string>. As it was designed to be used by a
porcelain script to dig the history starting from a block of text that
appear in the starting commit, it never had to look for anything but an
exact match.
When used by an end user who wants to look for the last commit that
removed a string (e.g. name of a variable) that he vaguely remembers,
however, it is useful to support case insensitive match.
When given the "--regexp-ignore-case" (or "-i") option, which originally
was designed to affect case sensitivity of the search done in the commit
log part, e.g. "log --grep", the matches made with -S/-G pickaxe search is
done case insensitively now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the duplicate diff queue loop into its own function that accepts
a match function: has_changes() for -S and diff_grep() for -G.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change diff_grep() to match the signature of has_changes() as a
preparation for the next patch that will use function pointers to
the two.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the unused parameter needle from contains() and has_changes().
Also replace the parameter len with a pointer to the diff_options. We
can use its member pickaxe to check if the needle is an empty string
and use the kwsmatch structure to find out the length of the match
instead.
This change is done as a preparation to unify the signatures of
has_changes() and diff_grep(), which will be used in the patch after
the next one to factor out common code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move duplicate if/else construct into its own helper function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With -S... --pickaxe-all, free the regex or the kws before returning
even if we found a match. Also get rid of the variable has_changes,
as we can simply break out of the loop.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With -G... --pickaxe-all, free the regex before returning even if we
found a match. Also get rid of the variable has_changes, as we can
simply break out of the loop.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check first for the unlikely case of an empty needle string and only
then populate the filespec, lest we leak it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-clone: describe --mirror more verbosely
do not depend on signed integer overflow
work around buggy S_ISxxx(m) implementations
xdiff: cast arguments for ctype functions to unsigned char
init: plug tiny one-time memory leak
diffcore-pickaxe.c: remove unnecessary curly braces
t3020 (ls-files-error-unmatch): remove stray '1' from end of file
setup: make sure git dir path is in a permanent buffer
environment.c: remove unused variable
git-svn: fix processing of decorated commit hashes
git-svn: check_cherry_pick should exclude commits already in our history
Documentation/git-svn: discourage "noMetadata"
Teach "-G<regexp>" that is similar to "-S<regexp> --pickaxe-regexp" to the
"git diff" family of commands. This limits the diff queue to filepairs
whose patch text actually has an added or a deleted line that matches the
given regexp. Unlike "-S<regexp>", changing other parts of the line that
has a substring that matches the given regexp IS counted as a change, as
such a change would appear as one deletion followed by one addition in a
patch text.
Unlike -S (pickaxe) that is intended to be used to quickly detect a commit
that changes the number of occurrences of hits between the preimage and
the postimage to serve as a part of larger toolchain, this is meant to be
used as the top-level Porcelain feature.
The implementation unfortunately has to run "diff" twice if you are
running "log" family of commands to produce patches in the final output
(e.g. "git log -p" or "git format-patch"). I think we _could_ cache the
result in-core if we wanted to, but that would require larger surgery to
the diffcore machinery (i.e. adding an extra pointer in the filepair
structure to keep a pointer to a strbuf around, stuff the textual diff to
the strbuf inside diffgrep_consume(), and make use of it in later stages
when it is available) and it may not be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the diff_queue_struct code, this macro help
to reset the structure.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --pickaxe-regex is used, forward past the end of matches instead of
advancing to the byte after their start. This way matches count only
once, even if the regular expression matches their tail -- like in the
fixed-string fork of the code.
E.g.: /.*/ used to count the number of bytes instead of the number of
lines. /aa/ resulted in a count of two in "aaa" instead of one.
Also document the fact that regexec() needs a NUL-terminated string as
its second argument by adding an assert().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use memmem() instead of open-coding it. The system libraries usually have a
much faster version than the memcmp()-loop here. Even our own fall-back in
compat/, which is used on Windows, is slightly faster.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Ubuntu 8.10 x64, before (v1.6.2-rc2):
8.09user 0.04system 0:08.14elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30952minor)pagefaults 0swaps
And with the patch:
1.50user 0.04system 0:01.54elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30645minor)pagefaults 0swaps
On Fedora 10 x64, before:
8.34user 0.05system 0:08.39elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+29268minor)pagefaults 0swaps
And with the patch:
1.15user 0.05system 0:01.20elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+32253minor)pagefaults 0swaps
On Windows Vista x64, before:
real 0m9.204s
user 0m0.000s
sys 0m0.000s
And with the patch:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
