Docfix.
* en/doc-typofix:
Fix spelling errors in no-longer-updated-from-upstream modules
multimail: fix a few simple spelling errors
sha1dc: fix trivial comment spelling error
Fix spelling errors in test commands
Fix spelling errors in messages shown to users
Fix spelling errors in names of tests
Fix spelling errors in comments of testcases
Fix spelling errors in code comments
Fix spelling errors in documentation outside of Documentation/
Documentation: fix a bunch of typos, both old and new
The watchman integration for fsmonitor was racy, which has been
corrected to be more conservative.
* kw/fsmonitor-watchman-fix:
fsmonitor: fix watchman integration
"git worktree add" internally calls "reset --hard" that should not
descend into submodules, even when submodule.recurse configuration
is set, but it was affected. This has been corrected.
* pb/no-recursive-reset-hard-in-worktree-add:
worktree: teach "add" to ignore submodule.recurse config
"git rev-parse --git-path HEAD.lock" did not give the right path
when run in a secondary worktree.
* js/git-path-head-dot-lock-fix:
git_path(): handle `.lock` files correctly
t1400: wrap setup code in test case
The implementation of "git log --graph" got refactored and then its
output got simplified.
* jc/log-graph-simplify:
t4215: use helper function to check output
graph: fix coloring of octopus dashes
graph: flatten edges that fuse with their right neighbor
graph: smooth appearance of collapsing edges on commit lines
graph: rename `new_mapping` to `old_mapping`
graph: commit and post-merge lines for left-skewed merges
graph: tidy up display of left-skewed merges
graph: example of graph output that can be simplified
graph: extract logic for moving to GRAPH_PRE_COMMIT state
graph: remove `mapping_idx` and `graph_update_width()`
graph: reduce duplication in `graph_insert_into_new_columns()`
graph: reuse `find_new_column_by_commit()`
graph: handle line padding in `graph_next_line()`
graph: automatically track display width of graph lines
Crufty code and logic accumulated over time around the object
parsing and low-level object access used in "git fsck" have been
cleaned up.
* jk/cleanup-object-parsing-and-fsck: (23 commits)
fsck: accept an oid instead of a "struct tree" for fsck_tree()
fsck: accept an oid instead of a "struct commit" for fsck_commit()
fsck: accept an oid instead of a "struct tag" for fsck_tag()
fsck: rename vague "oid" local variables
fsck: don't require an object struct in verify_headers()
fsck: don't require an object struct for fsck_ident()
fsck: drop blob struct from fsck_finish()
fsck: accept an oid instead of a "struct blob" for fsck_blob()
fsck: don't require an object struct for report()
fsck: only require an oid for skiplist functions
fsck: only provide oid/type in fsck_error callback
fsck: don't require object structs for display functions
fsck: use oids rather than objects for object_name API
fsck_describe_object(): build on our get_object_name() primitive
fsck: unify object-name code
fsck: require an actual buffer for non-blobs
fsck: stop checking tag->tagged
fsck: stop checking commit->parent counts
fsck: stop checking commit->tree value
commit, tag: don't set parsed bit for parse failures
...
When git commands are placed in the upstream of a pipe, their return
codes are lost. In this particular case, it is especially bad since we
are testing the intricacies of `git log --graph` behavior and if we hit
an unexpected failure or segfault, we want to know this.
Extract the common output checking logic into check_graph() where we
redirect the output of git commands upstream of pipe into a file and
have sed read from that file so that git failures are detected.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
The custom format for "git log --format=<format>" learned the l/L
placeholder that is similar to e/E that fills in the e-mail
address, but only the local part on the left side of '@'.
* pb/pretty-email-without-domain-part:
pretty: add "%aL" etc. to show local-part of email addresses
t4203: use test-lib.sh definitions
t6006: use test-lib.sh definitions
Code clean-up and a bugfix in the logic used to tell worktree local
and repository global refs apart.
* sg/dir-trie-fixes:
path.c: don't call the match function without value in trie_find()
path.c: clarify two field names in 'struct common_dir'
path.c: mark 'logs/HEAD' in 'common_list' as file
path.c: clarify trie_find()'s in-code comment
Documentation: mention more worktree-specific exceptions
The code to generate multi-pack index learned to show (or not to
show) progress indicators.
* wb/midx-progress:
multi-pack-index: add [--[no-]progress] option.
midx: honor the MIDX_PROGRESS flag in midx_repack
midx: honor the MIDX_PROGRESS flag in verify_midx_file
midx: add progress to expire_midx_packs
midx: add progress to write_midx_file
midx: add MIDX_PROGRESS flag
When all files from some subdirectory were renamed to the root
directory, the directory rename heuristics would fail to detect that
as a rename/merge of the subdirectory to the root directory, which has
been corrected.
* en/merge-recursive-directory-rename-fixes:
t604[236]: do not run setup in separate tests
merge-recursive: fix merging a subdirectory into the root directory
merge-recursive: clean up get_renamed_dir_portion()
"git notes copy $original" ought to copy the notes attached to the
original object to HEAD, but a mistaken tightening to command line
parameter validation made earlier disabled that feature by mistake.
* dd/notes-copy-default-dst-to-head:
notes: fix minimum number of parameters to "copy" subcommand
t3301: test diagnose messages for too few/many paramters
"rebase -i" ceased to run post-commit hook by mistake in an earlier
update, which has been corrected.
* pw/post-commit-from-sequencer:
sequencer: run post-commit hook
move run_commit_hook() to libgit and use it there
sequencer.h fix placement of #endif
t3404: remove uneeded calls to set_fake_editor
t3404: set $EDITOR in subshell
t3404: remove unnecessary subshell
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
Debugging support for lazy cloning has been a bit improved.
* jt/fetch-pack-record-refs-in-the-dot-promisor:
fetch-pack: write fetched refs to .promisor
Apply several spelling fixes that technically change what the tests are
executing, but do so in a way that is not tested and does not affect results
(e.g. modify the commit message to remove a typo, remove spelling mistakes
from refnames, etc.)
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix two test descriptions which stated "git -ls-files" when the actual
command being tested was "git ls-files".
Signed-off-by: Nathan Stocks <cleancut@github.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No substantive changes, just a few cosmetic changes:
* Indent steps of an individual test
* Don't have logic between the "test_expect_success" blocks that
the next block will depend upon, move it into the
test_expect_success section itself
* Fix spacing around redirection operators to match git style
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running Git commands quickly -- such as in a shell script or the
test suite -- the Git commands frequently complete and start again
during the same second. The example fsmonitor hooks to integrate with
Watchman truncate the nanosecond times to seconds. In principle, this is
fine, as Watchman claims to use inclusive comparisons [1]. The result
should only be an over-representation of the changed paths since the
last Git command.
However, Watchman's own documentation claims "Using a timestamp is prone
to race conditions in understanding the complete state of the file tree"
[2]. All of their documented examples use a "clockspec" that looks like
'c:123:234'. Git should eventually learn how to store this type of
string to provide a stronger integration, but that will be a more
invasive change.
When using GIT_TEST_FSMONITOR="$(pwd)/t7519/fsmonitor-watchman", scripts
such as t7519-wtstatus.sh fail due to these race conditions. In fact,
running any test script with GIT_TEST_FSMONITOR pointing at
t/t7519/fsmonitor-wathcman will cause failures in the test_commit
function. The 'git add "$indir$file"' command fails due to not enough
time between the creation of '$file' and the 'git add' command.
For now, subtract one second from the timestamp we pass to Watchman.
This will make our window large enough to avoid these race conditions.
Increasing the window causes tests like t7519-wtstatus.sh to pass.
When the integration was introduced in def437671 (fsmonitor: add a
sample integration script for Watchman, 2018-09-22), the query included
an expression that would ignore files created and deleted in that
window. The performance reason for this change was to ignore temporary
files created by a build between Git commands. However, this causes
failures in script scenarios where Git is creating or deleting files
quickly.
When using GIT_TEST_FSMONITOR as before, t2203-add-intent.sh fails
due to this add-and-delete race condition.
By removing the "expression" from the Watchman query, we remove this
race condition. It will lead to some performance degradation in the case
of users creating and deleting temporary files inside their working
directory between Git commands. However, that is a cost we need to pay
to be correct.
[1] https://github.com/facebook/watchman/blob/master/query/since.cpp#L35-L39
[2] https://facebook.github.io/watchman/docs/clockspec.html
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `git stash` while changes were staged for files that are
marked with the `skip-worktree` bit (e.g. files that are excluded in a
sparse checkout), the files are recorded as _deleted_ instead.
The reason is that `git stash` tries to construct the tree reflecting
the worktree essentially by copying the index to a temporary one and
then updating the files from the worktree. Crucially, it calls `git
diff-index` to update also those files that are in the HEAD but have
been unstaged in the index.
However, when the temporary index is updated via `git update-index --add
--remove`, skip-worktree entries mark the files as deleted by mistake.
Let's use the newly-introduced `--ignore-skip-worktree-entries` option
of `git update-index` to prevent exactly this from happening.
Note that the regression test case deliberately avoids replicating the
scenario described above and instead tries to recreate just the symptom.
Reported by Dan Thompson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df1 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comments for the staging/unstaging test did not accurately
describe the scenario being tested. It is not essential that
the test files being staged/unstaged appear at the end of the
index. All that is required is that the test files are not
flagged with CE_FSMONITOR_VALID and have a position in the
index greater than the number of entries in the index after
unstaging.
The comment for this test has been updated to be more
accurate with respect to the scenario that's being tested.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many projects the number of contributors is low enough that users know
each other and the full email address doesn't need to be displayed.
Displaying only the author's username saves a lot of columns on the screen.
Existing 'e/E' (as in "%ae" and "%aE") placeholders would show the
author's address as "prarit@redhat.com", which would waste columns to show
the same domain-part for all contributors when used in a project internal
to redhat. Introduce 'l/L' placeholders that strip '@' and domain part from
the e-mail address.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"worktree add" internally calls "reset --hard", but if
submodule.recurse is set, reset tries to recurse into
initialized submodules, which makes start_command try to
cd into non-existing submodule paths and die.
Fix that by making sure that the call to reset in "worktree add"
does not recurse.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since worktrees were introduced, the `git_path()` function _really_
needed to be called e.g. to get at the path to `logs/HEAD` (`HEAD` is
specific to the worktree, and therefore so is its reflog). However, the
wrong path is returned for `logs/HEAD.lock`.
This does not matter as long as the Git executable is doing the asking,
as the path for that `logs/HEAD.lock` file is constructed from
`git_path("logs/HEAD")` by appending the `.lock` suffix.
However, Git GUI just learned to use `--git-path` instead of appending
relative paths to what `git rev-parse --git-dir` returns (and as a
consequence not only using the correct hooks directory, but also using
the correct paths in worktrees other than the main one). While it does
not seem as if Git GUI in particular is asking for `logs/HEAD.lock`,
let's be safe rather than sorry.
Side note: Git GUI _does_ ask for `index.lock`, but that is already
resolved correctly, due to `update_common_dir()` preferring to leave
unknown paths in the (worktree-specific) git directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, you cannot use `--run=<...>` to skip that part, and a run
with `--run=0` (which is a common way to determine the test case number
corresponding to a given test case title).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 90cf590f53 (fsck: optionally show more helpful info for broken
links, 2016-07-17) added a system for decorating objects with names. The
code is split across builtin/fsck.c (which gives the initial names) and
fsck.c (which adds to the names as it traverses the object graph). This
leads to some duplication, where both sites have near-identical
describe_object() functions (the difference being that the one in
builtin/fsck.c uses a circular array of buffers to allow multiple calls
in a single printf).
Let's provide a unified object_name API for fsck. That lets us drop the
duplication, as well as making the interface boundaries more clear
(which will let us refactor the implementation more in a future patch).
We'll leave describe_object() in builtin/fsck.c as a thin wrapper around
the new API, as it relies on a static global to make its many callers a
bit shorter.
We'll also convert the bare add_decoration() calls in builtin/fsck.c to
put_object_name(). This fixes two minor bugs:
1. We leak many small strings. add_decoration() has a last-one-wins
approach: it updates the decoration to the new string and returns
the old one. But we ignore the return value, leaking the old
string. This is quite common to trigger, since we look at reflogs:
the tip of any ref will be described both by looking at the actual
ref, as well as the latest reflog entry. So we'd always end up
leaking one of those strings.
2. The last-one-wins approach gives us lousy names. For instance, we
first look at all of the refs, and then all of the reflogs. So
rather than seeing "refs/heads/master", we're likely to overwrite
it with "HEAD@{12345678}". We're generally better off using the
first name we find.
And indeed, the test in t1450 expects this ugly HEAD@{} name. After
this patch, we've switched to using fsck_put_object_name()'s
first-one-wins semantics, and we output the more human-friendly
"refs/tags/julius" (and the test is updated accordingly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we can't parse a commit, then parse_commit() will return an error
code. But it _also_ sets the "parsed" flag, which tells us not to bother
trying to re-parse the object. That means that subsequent parses have no
idea that the information in the struct may be bogus. I.e., doing this:
parse_commit(commit);
...
if (parse_commit(commit) < 0)
die("commit is broken");
will never trigger the die(). The second parse_commit() will see the
"parsed" flag and quietly return success.
There are two obvious ways to fix this:
1. Stop setting "parsed" until we've successfully parsed.
2. Keep a second "corrupt" flag to indicate that we saw an error (and
when the parsed flag is set, return 0/-1 depending on the corrupt
flag).
This patch does option 1. The obvious downside versus option 2 is that
we might continually re-parse a broken object. But in practice,
corruption like this is rare, and we typically die() or return an error
in the caller. So it's OK not to worry about optimizing for corruption.
And it's much simpler: we don't need to use an extra bit in the object
struct, and callers which check the "parsed" flag don't need to learn
about the corrupt bit, too.
There's no new test here, because this case is already covered in t5318.
Note that we do need to update the expected message there, because we
now detect the problem in the return from "parse_commit()", and not with
a separate check for a NULL tree. In fact, we can now ditch that
explicit tree check entirely, as we're covered robustly by this change
(and the previous recent change to treat a NULL tree as a parse error).
We'll also give tags the same treatment. I don't know offhand of any
cases where the problem can be triggered (it implies somebody ignoring a
parse error earlier in the process), but consistently returning an error
should cause the least surprise.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a hard-coded all-zeros object ID with a use of $ZERO_OID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test produces pseudo-collisions and tests git diff's behavior with
them, and is therefore sensitive to the hash in use. Update the test to
compute the collisions for both SHA-1 and SHA-256 using appropriate
constants. Move the heredocs inside the setup block so that all of the
setup code can be tested for failure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute several object IDs that exist in expected output, since we don't
care about the specific object IDs, only that the format of the output
is syntactically correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Move some expected result heredocs around so
that they can use computed variables.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding the length of an object ID, look this value up
using the translation tables. Similarly, compute input data for invalid
submodule entries using the tables as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test passes successfully with SHA-256, so remove the annotation
which limits it to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repository using a hash other than SHA-1 will need to have an
extension in the config file. Ignore any extensions when comparing
config files, since they don't usefully contribute to the goal of the
test.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
