Once upon a time, git-clone would refuse to write into a
directory that it did not itself create. The cleanup
routines for a failed clone could therefore just remove the
git and worktree dirs completely.
In 55892d2398 (Allow cloning to an existing empty directory,
2009-01-11), we learned to write into an existing directory.
Which means that doing:
mkdir foo
git clone will-fail foo
ends up deleting foo. This isn't a huge catastrophe, since
by definition foo must be empty. But it's somewhat
confusing; we should leave the filesystem as we found it.
Because we know that the only directory we'll write into is
an empty one, we can handle this case by just passing the
KEEP_TOPLEVEL flag to our recursive delete (if we could
write into populated directories, we'd have to keep track of
what we wrote and what we did not, which would be much
harder).
Note that we need to handle the work-tree and git-dir
separately, though, as only one might exist (and the new
tests in t5600 cover all cases).
Reported-by: Stephan Janssen <sjanssen@you-get.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two parts of git-clone's setup logic check whether a
directory exists, and they both call stat directly with the
same scratch "struct stat" buffer. Let's pull that into a
helper, which has a few advantages:
- it makes the purpose of the stat calls more obvious
- it makes it clear that we don't care about the
information in "buf" remaining valid
- if we later decide to make the check more robust (e.g.,
complaining about non-directories), we can do it in one
place
Note that we could just use file_exists() for this, which
has identical code. But we specifically care about
directories, so this future-proofs us against that function
later getting more picky about seeing actual files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
Contrary to the documentation, "git pull -4/-6 other-args" did not
ask the underlying "git fetch" to go over IPv4/IPv6, which has been
corrected.
* sw/pull-ipv46-passthru:
pull: pass -4/-6 option to 'git fetch'
Leak fixes.
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
The -4/-6 option should be passed through to 'git fetch' to be
consistent with the man page.
Signed-off-by: Wei Shuyu <wsy@dogben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
A broken access to object databases in recent update to "git grep
--recurse-submodules" has been fixed.
* bw/grep-recurse-submodules:
grep: take the read-lock when adding a submodule
"git commit", after making a commit, did not check for errors when
asking on what branch it made the commit, which has been correted.
* ao/check-resolve-ref-unsafe-result:
commit: check result of resolve_ref_unsafe
All other error messages from notes use stderr. Do the same when
alerting users of an unresolved notes merge.
Fix the output redirection in t3310 and t3320 as well. Previously, the
tests directed output to a file, but stderr was either not captured or
not sent to the file due to the order of the redirection operators.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have seven callers of `reduce_heads(foo)`. Six of them do
not use the original list `foo` again, and actually, all six of those
end up leaking it.
Introduce and use `reduce_heads_replace(&foo)` as a leak-free version of
`foo = reduce_heads(foo)` to fix several of these. Fix the remaining
leaks using `free_commit_list()`.
While we're here, document `reduce_heads()` and mark it as `extern`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In several functions, we iterate through a commit list by assigning
`result = result->next`. As a consequence, we lose the original pointer
and eventually leak the list.
Rewrite the loops so that we keep the original pointers, then call
`free_commit_list()`. Various alternatives were considered:
1) Use `UNLEAK(result)` before the loop. Simple change, but not very
pretty. These would definitely be new lows among our usages of UNLEAK.
2) Use `pop_commit()` when looping. Slightly less simple change, but it
feels slightly preferable to first display the list, then free it.
3) As in this patch, but with `UNLEAK()` instead of freeing. We'd still
go through all the trouble of refactoring the loop, and because it's not
super-obvious that we're about to exit, let's just free the lists -- it
probably doesn't affect the runtime much.
In `handle_independent()` we can drop `result` while we're here and
reuse the `revs`-variable instead. That matches several other users of
`reduce_heads()`. The memory-leak that this hides will be addressed in
the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a commit list and returns a commit list. The
returned list is built by modifying the original list. Thus the caller
should not use the original list again (and after the next commit fixes
a memory leak, it must not).
Change the function signature so that it takes a **list and has void
return type. That should make it harder to misuse this function.
While we're here, document this function.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --recurse-submodules, we add each submodule that we encounter to
the list of alternate object databases. With threading, our changes to
the list are not protected against races. Indeed, ThreadSanitizer
reports a race when we call `add_to_alternates_memory()` around the same
time that another thread is reading in the list through
`read_sha1_file()`.
Take the grep read-lock while adding the submodule. The lock is used to
serialize uses of non-thread-safe parts of Git's API, including
`read_sha1_file()`.
Helped-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible for resolve_ref_unsafe() to return NULL with a
REF_ISSYMREF flag if a symref points to a broken ref. In
this case, the read_remote_branches() function will segfault
passing the name to xstrdup().
This is hard to trigger in practice, since this function is
used as a callback to for_each_ref(), which will skip broken
refs in the first place (so it would have to be broken
racily, or for us to see a transient filesystem error).
If we see such a racy broken outcome let's treat it as "not
a symref". This is exactly the same thing that would happen
in the non-racy case (our function would not be called at
all, as for_each_ref would skip the broken symref).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add check of the resolved HEAD reference while printing of a commit summary.
resolve_ref_unsafe() may return NULL pointer if underlying calls of lstat() or
open() fail in files_read_raw_ref().
Such situation can be caused by race: file becomes inaccessible to this moment.
Signed-off-by: Andrey Okoshkin <a.okoshkin@samsung.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
"git gc" tries to avoid running two instances at the same time by
reading and writing pid/host from and to a lock file; it used to
use an incorrect fscanf() format when reading, which has been
corrected.
* aw/gc-lockfile-fscanf-fix:
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
Unlike "git commit-tree < file", "git commit-tree -F file" did not
pass the contents of the file verbatim and instead completed an
incomplete line at the end, if exists. The latter has been updated
to match the behaviour of the former.
* rk/commit-tree-make-F-verbatim:
commit-tree: do not complete line in -F input
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
The expansion returned from strbuf_check_branch_ref always starts with
"refs/heads/" by construction, but there is nothing about its name or
advertised API making that obvious. This command is used to process
human-supplied input from the command line and is usually not the
inner loop, so we can spare some cycles to be more defensive. Instead
of hard-coding the offset strlen("refs/heads/") to skip, verify that
the expansion actually starts with refs/heads/.
[jn: split out from a larger patch, added explanation]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 11b087adfd (ref-filter: consult want_color() before
emitting colors, 2017-07-13), we expect that setting
"color.ui" to "always" will enable color tag formats even
without a tty. As that commit was built on top of
136c8c8b8f (color: check color.ui in git_default_config(),
2017-07-13) from the same series, we didn't need to touch
tag's config parsing at all.
However, since we reverted 136c8c8b8f, we now need to
explicitly call git_color_default_config() to make this
work.
Let's do so, and also restore the test dropped in 0c88bf5050
(provide --color option for all ref-filter users,
2017-10-03). That commit swapped out our "color.ui=always"
test for "--color" in preparation for "always" going away.
But since it is here to stay, we should test both cases.
Note that for-each-ref also lost its color.ui support as
part of reverting 136c8c8b8f. But as a plumbing command, it
should _not_ respect the color.ui config. Since it also
gained a --color option in 0c88bf5050, that's the correct
way to ask it for color. We'll continue to test that, and
confirm that "color.ui" is not respected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 136c8c8b8f.
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
A common mistake when writing binary search is to allow possible
integer overflow by using the simple average:
mid = (min + max) / 2;
Instead, use the overflow-safe version:
mid = min + (max - min) / 2;
This translation is safe since the operation occurs inside a loop
conditioned on "min < max". The included changes were found using
the following git grep:
git grep '/ *2;' '*.c'
Making this cleanup will prevent future review friction when a new
binary search is contructed based on existing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix regression of "git add -p" for users with "color.ui = always"
in their configuration, by merging the topic below and adjusting it
for the 'master' front.
* jk/ui-color-always-to-auto:
t7301: use test_terminal to check color
t4015: use --color with --color-moved
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Many variables that points at a region of memory that will live
throughout the life of the program have been marked with UNLEAK
marker to help the leak checkers concentrate on real leaks..
* ma/builtin-unleak:
builtin/: add UNLEAKs
Code clean-up.
* rs/cleanup-strbuf-users:
graph: use strbuf_addchars() to add spaces
use strbuf_addstr() for adding strings to strbufs
path: use strbuf_add_real_path()
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_refdup() if hash is not needed
refs: pass NULL to refs_resolve_refdup() if hash is not needed
Our documentation advises to not re-use a strbuf, after strbuf_release
has been called on it. Use the proper reset instead.
Currently 'strbuf_release' releases and re-initializes the strbuf, so it
is safe, but slow. 'strbuf_reset' only resets the internal length variable,
such that this could also be accounted for as a micro-optimization.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error messages shown when the branch command is misused
by supplying it wrong number of parameters wasn't meaningful.
That's because it used the the phrase "too many branches"
assuming all parameters to be "valid" branch names. It's not
always the case as exemplified below,
$ git branch
foo
* master
$ git branch -m foo foo old
fatal: too many branches for a rename operation
Change the messages to be more general thus making no assumptions
about the "parameters".
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to prevent future mistakes by copying and pasting
code that checks the result of read_in_full() function.
* jk/read-in-full:
worktree: check the result of read_in_full()
worktree: use xsize_t to access file size
distinguish error versus short read from read_in_full()
avoid looking at errno for short read_in_full() returns
prefer "!=" when checking read_in_full() result
notes-merge: drop dead zero-write code
files-backend: prefer "0" for write_in_full() error check
Some commands (most notably "git status") makes an opportunistic
update when performing a read-only operation to help optimize later
operations in the same repository. The new "--no-optional-locks"
option can be passed to Git to disable them.
* jk/no-optional-locks:
git: add --no-optional-locks option
"git branch" learned "-c/-C" to create a new branch by copying an
existing one.
* sd/branch-copy:
branch: fix "copy" to never touch HEAD
branch: add a --copy (-c) option to go with --move (-m)
branch: add test for -m renaming multiple config sections
config: create a function to format section headers
Recent versions of "git rev-parse --parseopt" did not parse the
option specification that does not have the optional flags (*=?!)
correctly, which has been corrected.
* bc/rev-parse-parseopt-fix:
parse-options: only insert newline in help text if needed
parse-options: write blank line to correct output stream
t0040,t1502: Demonstrate parse_options bugs
git-rebase: don't ignore unexpected command line arguments
rev-parse parseopt: interpret any whitespace as start of help text
rev-parse parseopt: do not search help text for flag chars
t1502: demonstrate rev-parse --parseopt option mis-parsing
The final batch to "git rebase -i" updates to move more code from
the shell script to C.
* js/rebase-i-final:
rebase -i: rearrange fixup/squash lines using the rebase--helper
t3415: test fixup with wrapped oneline
rebase -i: skip unnecessary picks using the rebase--helper
rebase -i: check for missing commits in the rebase--helper
t3404: relax rebase.missingCommitsCheck tests
rebase -i: also expand/collapse the SHA-1s via the rebase--helper
rebase -i: do not invent onelines when expanding/collapsing SHA-1s
rebase -i: remove useless indentation
rebase -i: generate the script via rebase--helper
t3415: verify that an empty instructionFormat is handled as before
Use strbuf_addstr() instead of strbuf_addf() for adding strings. That's
simpler and makes the intent clearer.
Patch generated by Coccinelle and contrib/coccinelle/strbuf.cocci;
adjusted indentation in refs/packed-backend.c manually.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some UNLEAKs where we are about to return from `cmd_*`. UNLEAK the
variables in the same order as we've declared them. While addressing
`msg` in builtin/tag.c, convert the existing `strbuf_release()` calls as
well.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to get rid of several write-only variables.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
