* Document the behavior of commit_lock_file() when it fails, namely
that it rolls back the lock_file object and sets errno
appropriately.
* Document the behavior of rollback_lock_file() when called for a
lock_file object that has already been committed or rolled back,
namely that it is a NOOP.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If closing an open lockfile fails, then we cannot be sure of the
contents of the lockfile, so there is nothing sensible to do but
delete it. This change also insures that the lock_file object is left
in a defined state in this error path (namely, unlocked).
The only caller that is ultimately affected by this change is
try_merge_strategy() -> write_locked_index(), which can call
close_lock_file() via various execution paths. This caller uses a
static lock_file object which previously could have been reused after
a failed close_lock_file() even though it was still in locked state.
This change causes the lock_file object to be unlocked on failure,
thus fixing this error-handling path.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was previously a bug to call commit_lock_file() with a lock_file
object that was not active (an illegal access would happen within the
function). It was presumably never done, but this would be an easy
programming error to overlook. So before continuing, do a consistency
check that the lock_file object really is locked.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document a couple more functions and the flags argument as used by
hold_lock_file_for_update() and hold_lock_file_for_append().
Reorganize the document to make it more accessible.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" over HTTP transport had an artificial limit on number of
refs that can be pushed imposed by the command line length.
* jk/send-pack-many-refspecs:
send-pack: take refspecs over stdin
* so/rebase-doc:
Documentation/git-rebase.txt: <upstream> must be given to specify <branch>
Documentation/git-rebase.txt: -f forces a rebase that would otherwise be a no-op
"rev-parse --verify --quiet $name" is meant to quietly exit with a
non-zero status when $name is not a valid object name, but still
gave error messages in some cases.
* da/rev-parse-verify-quiet:
stash: prefer --quiet over shell redirection of the standard error stream
refs: make rev-parse --quiet actually quiet
t1503: use test_must_be_empty
Documentation: a note about stdout for git rev-parse --verify --quiet
The pretty-format specifier "%d", which expanded to " (tagname)"
for a tagged commit, gained a cousin "%D" that just gives the
"tagname" without frills.
* hj/pretty-naked-decoration:
pretty: add %D format specifier
"log --date=iso" uses a slight variant of ISO 8601 format that is
made more human readable. A new "--date=iso-strict" option gives
datetime output that is more strictly conformant.
* bb/date-iso-strict:
pretty: provide a strict ISO 8601 date format
Sometimes users want to report a bug they experience on their
repository, but they are not at liberty to share the contents of
the repository. "fast-export" was taught an "--anonymize" option
to replace blob contents, names of people and paths and log
messages with bland and simple strings to help them.
* jk/fast-export-anonymize:
docs/fast-export: explain --anonymize more completely
teach fast-export an --anonymize option
The number of refs that can be pushed at once over smart HTTP was
limited by the command line length. The limitation has been lifted
by passing these refs from the standard input of send-pack.
* jk/send-pack-many-refspecs:
send-pack: take refspecs over stdin
Add a new format specifier, '%D' that is identical in behaviour to '%d',
except that it does not include the ' (' prefix or ')' suffix provided
by '%d'.
Signed-off-by: Harry Jeffery <harry@exec64.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macro ALLOC_GROW manages several aspects of dynamic memory
allocations for arrays: It performs overprovisioning in order to avoid
reallocations in future calls, updates the allocation size variable,
multiplies the item size and thus allows users to simply specify the
item count, performs the reallocation and updates the array pointer.
Sometimes this is too much. Add the macro REALLOC_ARRAY, which only
takes care of the latter three points and allows users to specfiy the
number of items the array can store. It can increase and also decrease
the size. Using the macro avoid duplicating the variable name and
takes care of the item sizes automatically.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current syntax description makes one wonder if there is any
syntactic way to distinguish between <branch> and <upstream> so that
one can specify <branch> but not <upstream>, but that is not the
case.
Make it explicit that these arguments are positional, i.e. the
earlier ones cannot be omitted if you want to give later ones.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the stderr of "git credential-cache" is redirected to a
pipe, the reader on the other end of a pipe may be surprised
that the pipe remains open long after the process exits.
This happens because we may auto-spawn a daemon which is
long-lived, and which keeps stderr open.
We can solve this by redirecting the daemon's stderr to
/dev/null once we are ready to go into our event loop. We
would not want to do so before then, because we may want to
report errors about the setup (e.g., failure to establish
the listening socket).
This does mean that we will not report errors we encounter
for specific clients. That's acceptable, as such errors
should be rare (e.g., clients sending buggy requests).
However, we also provide an escape hatch: if you want to see
these later messages, you can provide the "--debug" option
to keep stderr open.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow -B and -A to act as short aliases for --before and --after
options respectively. This reduces typing and hopefully allows
reuse of muscle memory for grep(1) users.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Git no longer seems to use these flags or their associated config keys;
when they are present, git-svn outputs a message indicating that they
are being ignored.
Signed-off-by: Lawrence Velázquez <vq@larryv.me>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The single-parameter form is described as the preferred way. Separate
arguments are only supported for backward compatibility. Update the
example to the recommended form.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach a few codepaths to punt (instead of dying) when large blobs
that would not fit in core are involved in the operation.
* nd/large-blobs:
diff: shortcut for diff'ing two binary SHA-1 objects
diff --stat: mark any file larger than core.bigfilethreshold binary
diff.c: allow to pass more flags to diff_populate_filespec
sha1_file.c: do not die failing to malloc in unpack_compressed_entry
wrapper.c: introduce gentle xmallocz that does not die()
Use the new caching config-set API in git_config() calls.
* ta/config-set-1:
add tests for `git_config_get_string_const()`
add a test for semantic errors in config files
rewrite git_config() to use the config-set API
config: add `git_die_config()` to the config-set API
change `git_config()` return value to void
add line number and file name info to `config_set`
config.c: fix accuracy of line number in errors
config.c: mark error and warnings strings for translation
May need further updates to the description to explain what makes
various modes of operation to decide that the request can become a
"no-op".
* so/rebase-doc:
Documentation/git-rebase.txt: -f forces a rebase that would otherwise be a no-op
"git -c section.var command" and "git -c section.var= command"
should pass the configuration differently (the former should be
a boolean true, the latter should be an empty string).
* jk/command-line-config-empty-string:
config: teach "git -c" to recognize an empty string
Move strbuf_addchars() to strbuf.c, where it belongs, and make it
available for other callers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
Add in-core caching layer to let us avoid reading the same
configuration files number of times.
* ta/config-set:
test-config: add tests for the config_set API
add `config_set` API for caching config-like files
Git's "ISO" date format does not really conform to the ISO 8601
standard due to small differences, and it cannot be parsed by ISO
8601-only parsers, e.g. those of XML toolchains.
The output from "--date=iso" deviates from ISO 8601 in these ways:
- a space instead of the `T` date/time delimiter
- a space between time and time zone
- no colon between hours and minutes of the time zone
Add a strict ISO 8601 date format for displaying committer and
author dates. Use the '%aI' and '%cI' format specifiers and add
'--date=iso-strict' or '--date=iso8601-strict' date format names.
See http://thread.gmane.org/gmane.comp.version-control.git/255879 and
http://thread.gmane.org/gmane.comp.version-control.git/52414/focus=52585
for discussion.
Signed-off-by: Beat Bolli <bbolli@ewanet.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
