Reflow the recently changed branch/tag-for-each-ref
documentation. This change shows no changes under --word-diff, except
the innocuous change of moving git-tag.txt's "[--sort=<key>]" around
slightly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the --points-at option to default to HEAD for consistency with
its siblings --contains, --merged etc. which default to
HEAD. Previously we'd get:
$ git tag --points-at 2>&1 | head -n 1
error: option `points-at' requires a value
This changes behavior added in commit ae7706b9ac (tag: add --points-at
list option, 2012-02-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "tag" command to implicitly turn on its --list mode when
provided with a list-like option such as --contains, --points-at etc.
This is for consistency with how "branch" works. When "branch" is
given a list-like option, such as --contains, it implicitly provides
--list. Before this change "tag" would error out on those sorts of
invocations. I.e. while both of these worked for "branch":
git branch --contains v2.8.0 <pattern>
git branch --list --contains v2.8.0 <pattern>
Only the latter form worked for "tag":
git tag --contains v2.8.0 '*rc*'
git tag --list --contains v2.8.0 '*rc*'
Now "tag", like "branch", will implicitly supply --list when a
list-like option is provided, and no other conflicting non-list
options (such as -d) are present on the command-line.
Spelunking through the history via:
git log --reverse -p -G'only allowed with' -- '*builtin*tag*c'
Reveals that there was no good reason for not allowing this in the
first place. The --contains option added in 32c35cfb1e ("git-tag: Add
--contains option", 2009-01-26) made this an error. All the other
subsequent list-like options that were added copied its pattern of
making this usage an error.
The only tests that break as a result of this change are tests that
were explicitly checking that this "branch-like" usage wasn't
permitted. Change those failing tests to check that this invocation
mode is permitted, add extra tests for the list-like options we
weren't testing, and tests to ensure that e.g. we don't toggle the
list mode in the presence of other conflicting non-list options.
With this change errors messages such as "--contains option is only
allowed with -l" don't make sense anymore, since options like
--contain turn on -l. Instead we error out when list-like options such
as --contain are used in conjunction with conflicting options such as
-d or -v.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation for --list so that it's described as a
toggle, not as an option that takes a <pattern> as an argument.
Junio initially documented this in b867c7c23a ("git-tag: -l to list
tags (usability).", 2006-02-17), but later Jeff King changed "tag" to
accept multiple patterns in 588d0e834b ("tag: accept multiple patterns
for --list", 2011-06-20).
However, documenting this as "-l <pattern>" was never correct, as
these both worked before Jeff's change:
git tag -l 'v*'
git tag 'v*' -l
One would expect an option that was documented like that to only
accept:
git tag --list
git tag --list 'v*rc*'
And after Jeff's change, one that took multiple patterns:
git tag --list 'v*rc*' --list '*2.8*'
But since it's actually a toggle all of these work as well, and
produce identical output to the last example above:
git tag --list 'v*rc*' '*2.8*'
git tag --list 'v*rc*' '*2.8*' --list --list --list
git tag --list 'v*rc*' '*2.8*' --list -l --list -l --list
Now the documentation is more in tune with how the "branch" command
describes its --list option since commit cddd127b9a ("branch:
introduce --list option", 2011-08-28).
Change the test suite to assert that these invocations work for the
cases that weren't already being tested for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The paragraph begins with a sample command line `git branch <name>`
that has nothing to do with the option being described. Remove it,
but use the space to instead show that multiple patterns can be
given.
Also mention the unfortunate `-l` that can be easily confused with
it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an example for `git branch <pattern>` to say `git branch
<branchname>` to be consistent with the synopsis. This changes
documentation added in d8d33736b5 ("branch: allow pattern arguments",
2011-08-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document memihash_cont() and hashmap_disallow_rehash()
in Documentation/technical/api-hashmap.txt.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach remote-curl to understand push options and to be able to convey
them across HTTP.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-describe tells you the version number you're at, or errors out, e.g.
when you run it outside of a repository, which may happen when downloading
a tar ball instead of using git to obtain the source code.
To keep this property of only erroring out, when not in a repository,
severe (submodule) errors must be downgraded to reporting them gently
instead of having git-describe error out completely.
To achieve that a flag '--broken' is introduced, which is in the same
vein as '--dirty' but uses an actual child process to check for dirtiness.
When that child dies unexpectedly, we'll append '-broken' instead of
'-dirty'.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration file learned a new "includeIf.<condition>.path"
that includes the contents of the given path only when the
condition holds. This allows you to say "include this work-related
bit only in the repositories under my ~/work/ directory".
* nd/conditional-config-include:
config: add conditional include
config.txt: reflow the second include.path paragraph
config.txt: clarify multiple key values in include.path
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
Amend the section which describes how the first line of the subject
should look like to say that the ":" in "area: " shouldn't be treated
like a full stop for the purposes of letter casing.
Change the two subject examples to make this new paragraph clearer,
i.e. "unstar" is not a common word, and "git-cherry-pick.txt" is a
much longer string than "githooks.txt". Pick two recent commits from
git.git that fit better for the description.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behavior of specifying --merged & --no-merged to be an
error, instead of silently picking the option that was provided last.
Subsequent changes of mine add a --no-contains option in addition to
the existing --contains. Providing both of those isn't an error, and
has actual meaning.
Making its cousins have different behavior in this regard would be
confusing to the user, especially since we'd be silently disregarding
some of their command-line input.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the wording for the --merged and --no-merged options to talk
about "commits" instead of "tips".
This phrasing was copied from the "branch" documentation in commit
5242860f54 ("tag.c: implement '--merged' and '--no-merged' options",
2015-09-10). Talking about the "tip" is branch nomenclature, not
something usually associated with tags.
This phrasing might lead the reader to believe that these options
might find tags pointing to trees or blobs, let's instead be explicit
and only talk about commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the --[no-]merged documentation into documentation that
documents each option independently. This is in line with how "branch"
and "for-each-ref" are documented, and makes subsequent changes to
discuss the limits & caveats of each option easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation for the --merged & --no-merged options earlier
in the documentation, to sit along the other switches, and right next
to the similar --contains and --points-at switches.
It makes more sense to group the options together, not have some
options after the like of <tagname>, <object>, <format> etc.
This was originally put there when the --merged & --no-merged options
were introduced in 5242860f54 ("tag.c: implement '--merged' and
'--no-merged' options", 2015-09-10). It's not apparent from that
commit that the documentation is being placed apart from other
options, rather than along with them, so this was likely missed in the
initial review.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation for push.tracking=* to re-include a mention
of what "tracking" does.
The "tracking" option was renamed to "upstream" back in
53c4031 ("push.default: Rename 'tracking' to 'upstream'", 2011-02-16),
this section was then subsequently rewritten in 87a70e4 ("config doc:
rewrite push.default section", 2013-06-19) to remove any mention of
"tracking".
Maybe we should just warn or die nowadays if this option is in the
config, but I had some old config of mine use this option, I'd
forgotten that it was a synonym, and nothing in git's documentation
mentioned that.
That's bad, either we shouldn't support it at all, or we should
document what it does. This patch does the latter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook was added in a86ed83cce (Merge branch 'tr/notes-display' -
2010-03-24), which updated githooks.txt but not git-commit.txt.
git-commit.txt was later updated in e858af6d50 (commit: document a
couple of options - 2012-06-08). Since this commit focused on command
line options, this section was probably forgotten.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change these two obvious typos to be in line with the rest of the
documentation, which uses the correct --[no-]whatever form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach clone --recurse-submodules to optionally take a pathspec argument
which describes which submodules should be recursively initialized and
cloned. If no pathspec is provided, --recurse-submodules will
recursively initialize and clone all submodules by using a default
pathspec of ".". In order to construct more complex pathspecs,
--recurse-submodules can be given multiple times.
This also configures the 'submodule.active' configuration option to be
the given pathspec, such that any future invocation of `git submodule
update` will keep up with the pathspec.
Additionally the switch '--recurse' is removed from the Documentation as
well as marked hidden in the options array, to streamline the options
for submodules. A simple '--recurse' doesn't convey what is being
recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a
lot of other commands we already have '--recurse-submodules' to mean
recursing into submodules, so advertise this spelling here as the
genuine option.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `submodule init` to initialize submodules which have been
configured to be active by setting 'submodule.active' with a pathspec.
Now if no path arguments are given and 'submodule.active' is configured,
`init` will initialize all submodules which have been configured to be
active. If no path arguments are given and 'submodule.active' is not
configured, then `init` will retain the old behavior of initializing all
submodules.
This allows users to record more complex patterns as it saves retyping
them whenever you invoke update.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the submodule.<name>.url config option is used to determine if
a given submodule is of interest to the user. This ends up being
cumbersome in a world where we want to have different submodules checked
out in different worktrees or a more generalized mechanism to select
which submodules are of interest.
In a future with worktree support for submodules, there will be multiple
working trees, each of which may only need a subset of the submodules
checked out. The URL (which is where the submodule repository can be
obtained) should not differ between different working trees.
It may also be convenient for users to more easily specify groups of
submodules they are interested in as opposed to running "git submodule
init <path>" on each submodule they want checked out in their working
tree.
To this end two config options are introduced, submodule.active and
submodule.<name>.active. The submodule.active config holds a pathspec
that specifies which submodules should exist in the working tree. The
submodule.<name>.active config is a boolean flag used to indicate if
that particular submodule should exist in the working tree.
Its important to note that submodule.active functions differently than
the other configuration options since it takes a pathspec. This allows
users to adopt at least two new workflows:
1. Submodules can be grouped with a leading directory, such that a
pathspec e.g. 'lib/' would cover all library-ish modules to allow
those who are interested in library-ish modules to set
"submodule.active = lib/" just once to say any and all modules in
'lib/' are interesting.
2. Once the pathspec-attribute feature is invented, users can label
submodules with attributes to group them, so that a broad pathspec
with attribute requirements, e.g. ':(attr:lib)', can be used to say
any and all modules with the 'lib' attribute are interesting.
Since the .gitattributes file, just like the .gitmodules file, is
tracked by the superproject, when a submodule moves in the
superproject tree, the project can adjust which path gets the
attribute in .gitattributes, just like it can adjust which path has
the submodule in .gitmodules.
Neither of these two additional configuration options solve the problem
of wanting different submodules checked out in different worktrees
because multiple worktrees share .git/config. Only once per-worktree
configurations become a reality can this be solved, but this is a
necessary preparatory step for that future.
Given these multiple ways to check if a submodule is of interest, the
more fine-grained submodule.<name>.active option has the highest order
of precedence followed by the pathspec check against submodule.active.
To ensure backwards compatibility, if neither of these options are set,
git falls back to checking the submodule.<name>.url option to determine
if a submodule is interesting.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec mechanism learned to further limit the paths that
match the pattern to those that have specified attributes attached
via the gitattributes mechanism.
* bw/attr-pathspec:
pathspec: allow escaped query values
pathspec: allow querying for attributes
From a working tree of a repository, a new option of "rev-parse"
lets you ask if the repository is used as a submodule of another
project, and where the root level of the working tree of that
project (i.e. your superproject) is.
* sb/rev-parse-show-superproject-root:
rev-parse: add --show-superproject-working-tree
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
Make git-credential-cache follow the XDG base path specification by
default. This increases consistency with other applications and helps
keep clutter out of users' home directories.
Check the old socket location, ~/.git-credential-cache/, and use
~/.git-credential-cache/socket if that directory exists rather than
forcing users who have used `git credential-cache` before to migrate to
the new XDG compliant location.
Otherwise use the socket $XDG_CACHE_HOME/git/credential/socket following
XDG base path specification. Use the subdirectory credential/ in case
other files are cached under $XDG_CACHE_HOME/git/ in the future and to
make the socket's purpose clear.
Signed-off-by: Devin Lehmacher <lehmacdj@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new known failure mode is introduced[1], which is actually not
a failure but a feature in read-tree. Unlike checkout for which
the recursive submodule tests were originally written, read-tree does
warn about ignored untracked files that would be overwritten.
For the sake of keeping the test library for submodules generic, just
mark the test as a failure.
[1] KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This exposes a flag to recurse into submodules
in builtin/checkout making use of the code implemented
in prior patches.
A new failure mode is introduced in the submodule
update library, as the directory/submodule conflict
is not solved in prior patches.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
Based on a patch by Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes a set of repositories want to share configuration settings
among themselves that are distinct from other such sets of repositories.
A user may work on two projects, each of which have multiple
repositories, and use one user.email for one project while using another
for the other.
Setting $GIT_DIR/.config works, but if the penalty of forgetting to
update $GIT_DIR/.config is high (especially when you end up cloning
often), it may not be the best way to go. Having the settings in
~/.gitconfig, which would work for just one set of repositories, would
not well in such a situation. Having separate ${HOME}s may add more
problems than it solves.
Extend the include.path mechanism that lets a config file include
another config file, so that the inclusion can be done only when some
conditions hold. Then ~/.gitconfig can say "include config-project-A
only when working on project-A" for each project A the user works on.
In this patch, the only supported grouping is based on $GIT_DIR (in
absolute path), so you would need to group repositories by directory, or
something like that to take advantage of it.
We already have include.path for unconditional includes. This patch goes
with includeIf.<condition>.path to make it clearer that a condition is
required. The new config has the same backward compatibility approach as
include.path: older git versions that don't understand includeIf will
simply ignore them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrasing in this paragraph may give an impression that you can only
use it once. Rephrase it a bit.
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" takes a pathspec so that the local changes can be
stashed away only partially.
* tg/stash-push:
stash: allow pathspecs in the no verb form
stash: use stash_push for no verb form
stash: teach 'push' (and 'create_stash') to honor pathspec
stash: refactor stash_create
stash: add test for the create command line arguments
stash: introduce push verb
When "git submodule init" decides that the submodule in the working
tree is its upstream, it now gives a warning as it is not a very
common setup.
* sb/submodule-init-url-selection:
submodule init: warn about falling back to a local path
In some situations it is useful to know if the given repository
is a submodule of another repository.
Add the flag --show-superproject-working-tree to git-rev-parse
to make it easy to find out if there is a superproject. When no
superproject exists, the output will be empty.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the git_commit_non_empty_tree function would always pass any
commit with no parents to git-commit-tree, regardless of whether the
tree was nonempty. The new commit would then be recorded in the
filter-branch revision map, and subsequent commits which leave the tree
untouched would be correctly filtered.
With this change, parentless commits with an empty tree are correctly
pruned, and an empty file is recorded in the revision map, signifying
that it was rewritten to "no commits." This works naturally with the
parent mapping for subsequent commits.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linking the description for pathname quoting to the configuration
variable "core.quotePath" removes inconstistent and incomplete
sections while also giving two hints how to deal with it: Either with
"-c core.quotePath=false" or with "-z".
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that stash_push is used in the no verb form of stash, allow
specifying the command line for this form as well. Always use -- to
disambiguate pathspecs from other non-option arguments.
Also make git stash -p an alias for git stash push -p. This allows
users to use git stash -p <pathspec>.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have stash_push, which accepts pathspec arguments, use
it instead of stash_save in git stash without any additional verbs.
Previously we allowed git stash -- -message, which is no longer allowed
after this patch. Messages starting with a hyphen was allowed since
3c2eb80f, ("stash: simplify defaulting to "save" and reject unknown
options"). However it was never the intent to allow that, but rather it
was allowed accidentally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on a repository, it's often helpful to stash the changes
of a single or multiple files, and leave others alone. Unfortunately
git currently offers no such option. git stash -p can be used to work
around this, but it's often impractical when there are a lot of changes
over multiple files.
Allow 'git stash push' to take pathspec to specify which paths to stash.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is initialized, the config variable 'submodule.<name>.url'
is set depending on the value of the same variable in the .gitmodules
file. When the URL indicates to be relative, then the url is computed
relative to its default remote. The default remote cannot be determined
accurately in all cases, such that it falls back to 'origin'.
The 'origin' remote may not exist, though. In that case we give up looking
for a suitable remote and we'll just assume it to be a local relative path.
This can be confusing to users as there is a lot of guessing involved,
which is not obvious to the user.
So in the corner case of assuming a local autoritative truth, warn the
user to lessen the confusion.
This behavior was introduced in 4d6893200 (submodule add: allow relative
repository path even when no url is set, 2011-06-06), which shared the
code with submodule-init and then ported to C in 3604242f08 (submodule:
port init from shell to C, 2016-04-15).
In case of submodule-add, this behavior makes sense in some use cases[1],
however for submodule-init there does not seem to be an immediate obvious
use case to fall back to a local submodule. However there might be, so
warn instead of die here.
While adding the warning, also clarify the behavior of relative URLs in
the documentation.
[1] e.g. http://stackoverflow.com/questions/8721984/git-ignore-files-for-public-repository-but-not-for-private
"store a secret locally in a submodule, with no intention to publish it"
Reported-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitdiffcore documentation quotes the term "Complete Rewrites" in
headers for no real gain. This would make sense if the term could be
easily confused if not properly grouped together. But actually, the term
is quite obvious and thus does not really need any quoting, especially
regarding that it is not used anywhere else.
But more importanly, this brings up a bug when rendering man pages: when
trying to render quotes inside of a section header, we end up with
quotes which have been misaligned to the end of line. E.g.
diffcore-break: For Splitting Up Complete Rewrites
--------------------------------------------------
renders as
DIFFCORE-BREAK: FOR SPLITTING UP COMPLETE REWRITES""
, which is obviously wrong. While this is fixable for the man pages by
using double-quotes (e.g. ""COMPLETE REWRITES""), this again breaks it
for our generated HTML pages.
So fix the issue by simply dropping quotes inside of section headers,
which is currently only done for the term "Complete Rewrites".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
The command line options for ssh invocation needs to be tweaked for
some implementations of SSH (e.g. PuTTY plink wants "-P <port>"
while OpenSSH wants "-p <port>" to specify port to connect to), and
the variant was guessed when GIT_SSH environment variable is used
to specify it. The logic to guess now applies to the command
specified by the newer GIT_SSH_COMMAND and also core.sshcommand
configuration variable, and comes with an escape hatch for users to
deal with misdetected cases.
* sf/putty-w-args:
connect.c: stop conflating ssh command names and overrides
connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
git_connect(): factor out SSH variant handling
connect: rename tortoiseplink and putty variables
connect: handle putty/plink also in GIT_SSH_COMMAND
The gitattributes machinery is being taught to work better in a
multi-threaded environment.
* bw/attr: (27 commits)
attr: reformat git_attr_set_direction() function
attr: push the bare repo check into read_attr()
attr: store attribute stack in attr_check structure
attr: tighten const correctness with git_attr and match_attr
attr: remove maybe-real, maybe-macro from git_attr
attr: eliminate global check_all_attr array
attr: use hashmap for attribute dictionary
attr: change validity check for attribute names to use positive logic
attr: pass struct attr_check to collect_some_attrs
attr: retire git_check_attrs() API
attr: convert git_check_attrs() callers to use the new API
attr: convert git_all_attrs() to use "struct attr_check"
attr: (re)introduce git_check_attr() and struct attr_check
attr: rename function and struct related to checking attributes
attr.c: outline the future plans by heavily commenting
Documentation: fix a typo
attr.c: add push_stack() helper
attr: support quoting pathname patterns in C style
attr.c: plug small leak in parse_attr_line()
attr.c: tighten constness around "git_attr" structure
...
Clean-up and updates to command line completion (in contrib/).
* sg/completion: (22 commits)
completion: restore removed line continuating backslash
completion: cache the path to the repository
completion: extract repository discovery from __gitdir()
completion: don't guard git executions with __gitdir()
completion: consolidate silencing errors from git commands
completion: don't use __gitdir() for git commands
completion: respect 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: fix completion after 'git -C <path>'
completion: don't offer commands when 'git --opt' needs an argument
completion: list short refs from a remote given as a URL
completion: don't list 'HEAD' when trying refs completion outside of a repo
completion: list refs from remote when remote's name matches a directory
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: ensure that the repository path given on the command line exists
completion tests: add tests for the __git_refs() helper function
completion tests: check __gitdir()'s output in the error cases
completion tests: consolidate getting path of current working directory
completion tests: make the $cur variable local to the test helper functions
...
The "negative" pathspec feature was somewhat more cumbersome to use
than necessary in that its short-hand used "!" which needed to be
escaped from shells, and it required "exclude from what?" specified.
* lt/pathspec-negative:
pathspec: don't error out on all-exclusionary pathspec patterns
pathspec magic: add '^' as alias for '!'
The code to list branches in "git branch" has been consolidated
with the more generic ref-filter API.
* kn/ref-filter-branch-list: (21 commits)
ref-filter: resurrect "strip" as a synonym to "lstrip"
branch: implement '--format' option
branch: use ref-filter printing APIs
branch, tag: use porcelain output
ref-filter: allow porcelain to translate messages in the output
ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
ref-filter: Do not abruptly die when using the 'lstrip=<N>' option
ref-filter: rename the 'strip' option to 'lstrip'
ref-filter: make remote_ref_atom_parser() use refname_atom_parser_internal()
ref-filter: introduce refname_atom_parser()
ref-filter: introduce refname_atom_parser_internal()
ref-filter: make "%(symref)" atom work with the ':short' modifier
ref-filter: add support for %(upstream:track,nobracket)
ref-filter: make %(upstream:track) prints "[gone]" for invalid upstreams
ref-filter: introduce format_ref_array_item()
ref-filter: move get_head_description() from branch.c
ref-filter: modify "%(objectname:short)" to take length
ref-filter: implement %(if:equals=<string>) and %(if:notequals=<string>)
ref-filter: include reference to 'used_atom' within 'atom_value'
...
The <url> part in "http.<url>.<variable>" configuration variable
can now be spelled with '*' that serves as wildcard.
E.g. "http.https://*.example.com.proxy" can be used to specify the
proxy used for https://a.example.com, https://b.example.com, etc.,
i.e. any host in the example.com domain.
* ps/urlmatch-wildcard:
urlmatch: allow globbing for the URL host part
urlmatch: include host in urlmatch ranking
urlmatch: split host and port fields in `struct url_info`
urlmatch: enable normalization of URLs with globs
mailmap: add Patrick Steinhardt's work address
"git describe" and "git name-rev" have been taught to take more
than one refname patterns to restrict the set of refs to base their
naming output on, and also learned to take negative patterns to
name refs not to be used for naming via their "--exclude" option.
* jk/describe-omit-some-refs:
describe: teach describe negative pattern matches
describe: teach --match to accept multiple patterns
name-rev: add support to exclude refs by pattern match
name-rev: extend --refs to accept multiple patterns
doc: add documentation for OPT_STRING_LIST
In commit 07e7dbf0d (gc: default aggressive depth to 50, 2016-08-11),
the default aggressive depth of git-gc has been changed to 50. While
git-config(1) has been updated to represent the new default value,
git-gc(1) still mentions the old value. This patch fixes it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git blame used vertical bars for optional
arguments to -M and -C, which is unusual and potentially confusing.
Since most man pages use brackets for optional items, and that's
consistent with how we document the same options for git diff and
friends, use brackets here, too.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option is “--detach”, but we accidentally spelled it “--detached” at
one point in the man page.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reported-by: Casey Rodarmor <casey@rodarmor.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of 'iff' may be confusing to people not familiar with this term.
Improving the --normalize option's documentation to remove the use of
'iff', and clearly describe what happens when the condition is not met.
Signed-off-by: Damien Regad <dregad@mantisbt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new git stash push verb in addition to git stash save. The
push verb is used to transition from the current command line arguments
to a more conventional way, in which the message is given as an argument
to the -m option.
This allows us to have pathspecs at the end of the command line
arguments like other Git commands do, so that the user can say which
subset of paths to stash (and leave others behind).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not just . and .., but any path that begins with dot is not copied
when copying the template directory to a new repository. You can
customize the template directory, copying some dotfiles might make
sense, but it's actually a good thing not to, because you would not
want to have your git directory copied in every git directory that
is created should you decide to put your template directory under
version control, for example. Plus, it might be used as a feature
by people who would want to exclude some files.
Signed-off-by: Grégoire Paris <postmaster@greg0ire.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing `::` after the title.
Signed-off-by: David Pursehouse <dpursehouse@collab.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is often useful to break a commit into multiple parts that are more
logical separations. This can be tricky to learn how to do without the
brute-force method if re-writing code or commit messages from scratch.
Add a section to the git-reset documentation which shows an example
process for how to use git add -p and git commit -c HEAD@{1} to
interactively break a commit apart and re-use the original commit
message as a starting point when making the new commit message.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation explained what "git stash" does to the working
tree (after stashing away the local changes) in terms of "reset
--hard", which was exposing an unnecessary implementation detail.
* tg/stash-doc-cleanup:
Documentation/stash: remove mention of git reset --hard
The push-options given via the "--push-options" option were not
passed through to external remote helpers such as "smart HTTP" that
are invoked via the transport helper.
* sb/push-options-via-transport:
push options: pass push options to the transport helper
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't mention git reset --hard in the documentation for git stash save.
It's an implementation detail that doesn't matter to the end user and
thus shouldn't be exposed to them. In addition it's not quite true for
git stash -p, and will not be true when a filename argument to limit the
stash to a few files is introduced.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation gives an example of the submodule foreach
command that uses both backticks and single-quotes. We stick
the whole thing inside "+" markers to make it monospace, but
the inside punctuation still needs escaping. We handle the
backticks with "{backtick}", and use backslash-escaping for
the single-quotes.
But we missed the escaping on the second quote. Fortunately,
asciidoc renders this unbalanced quote as we want (showing
the quote), but asciidoctor does not. We could fix it by
adding the missing backslash.
However, let's take a step back. Even when rendered
correctly, it's hard to read a long command stuck into the
middle of a paragraph, and the important punctuation is hard
to notice. Let's instead bump it into its own single-line
code block. That makes both the source and the rendered
result more readable, and as a bonus we don't have to worry
about quoting at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these options is missing the closing single-quote on
the option name. This understandably confuses asciidoc,
which ends up rendering a stray quote, like:
option cloning {'true|false}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of erroring out and telling the user that they should add a
positive pattern that covers everything else, just _do_ that.
For commands where we honor the current cwd by default (ie grep, ls-files
etc), we make that default positive pathspec be the current working
directory. And for commands that default to the whole project (ie diff,
log, etc), the default positive pathspec is the whole project.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The choice of '!' for a negative pathspec ends up not only not matching
what we do for revisions, it's also a horrible character for shell
expansion since it needs quoting.
So add '^' as an alternative alias for an excluding pathspec entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have 168 man pages that mention they are part of Git, you
can check yourself easily via:
$ git grep "Part of the linkgit:git\[1\] suite" |wc -l
168
However some have a trailing period, i.e.
$ git grep "Part of the linkgit:git\[1\] suite." |wc -l
8
Unify the bottom line in all man pages to not end with a period.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the document patch for f0298cf1c6 (revision walker: include a
detached HEAD in --all - 2009-01-16).
Even though that commit is about detached HEAD, as Jeff pointed out,
always adding HEAD in that case may have subtle differences with
--source or --exclude. So the document mentions nothing about the
detached-ness.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to this, the `--no-gui` option was not documented in the manpage.
This commit introduces this into the manpage
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot that "strip" was introduced at 0571979bd6 ("tag: do not
show ambiguous tag names as "tags/foo"", 2016-01-25) as part of Git
2.8 (and 2.7.1) when we started calling this "lstrip" to make it
easier to explain the new "rstrip" operation.
We shouldn't have renamed the existing one; "lstrip" should have
been a new synonym that means the same thing as "strip". Scripts
in the wild are surely using the original form already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is often useful to break a commit into multiple parts that are more
logical separations. This can be tricky to learn how to do without the
brute-force method if re-writing code or commit messages from scratch.
Add a section to the git-reset documentation which shows an example
process for how to use git add -p and git commit -c HEAD@{1} to
interactively break a commit apart and re-use the original commit
message as a starting point when making the new commit message.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of 'git rev-parse --git-dir' can be either a relative or an
absolute path, depending on whether the current working directory is
at the top of the worktree or the .git directory or not, or how the
path to the repository is specified via the '--git-dir=<path>' option
or the $GIT_DIR environment variable. And if that output is a
relative path, then it is relative to the directory where any 'git
-C <path>' options might have led us.
This doesn't matter at all for regular scripts, because the git
wrapper automatically takes care of changing directories according to
the '-C <path>' options, and the scripts can then simply follow any
path returned by 'git rev-parse --git-dir', even if it's a relative
path.
Our Bash completion script, however, is unique in that it must run
directly in the user's interactive shell environment. This means that
it's not executed through the git wrapper and would have to take care
of any '-C <path> options on its own, and it can't just change
directories as it pleases. Consequently, adding support for taking
any '-C <path>' options on the command line into account during
completion turned out to be considerably more difficult, error prone
and required more subshells and git processes when it had to cope with
a relative path to the .git directory.
Help this rather special use case and teach 'git rev-parse' a new
'--absolute-git-dir' option which always outputs a canonicalized
absolute path to the .git directory, regardless of whether the path is
discovered automatically or is specified via $GIT_DIR or 'git
--git-dir=<path>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
Asciidoctor, an alternative reimplementation of AsciiDoc, still
needs some changes to work with documents meant to be formatted
with AsciiDoc. "make USE_ASCIIDOCTOR=YesPlease" to use it out of
the box to document our pages is getting closer to reality.
* bc/use-asciidoctor-opt:
Documentation: implement linkgit macro for Asciidoctor
Makefile: add a knob to enable the use of Asciidoctor
Documentation: move dblatex arguments into variable
Documentation: add XSLT to fix DocBook for Texinfo
Documentation: sort sources for gitman.texi
Documentation: remove unneeded argument in cat-texi.perl
Documentation: modernize cat-texi.perl
Documentation: fix warning in cat-texi.perl
Commit 55cccf4bb (color_parse_mem: allow empty color spec,
2017-02-01) clearly defined the behavior of an empty color
config variable. Let's document that, and give a hint about
why it might be useful.
It's important not to say that it makes the item uncolored,
because it doesn't. It just sets no attributes, which means
that any previous attributes continue to take effect.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands git-branch and git-tag accept the '--create-reflog'
option, and create reflog even when core.logallrefupdates
configuration is explicitly set not to.
On the other hand, the negated form '--no-create-reflog' is accepted
as a valid option but has no effect (other than overriding an
earlier '--create-reflog' on the command line). This silent noop may
puzzle users. To communicate that this is a known limitation, add a
short note in the manuals for git-branch and git-tag.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add documentation for the `--recurse-submodules=only` option of
git-push. The feature was added in commit 225e8bf (add option to
push only submodules).
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since nobody uses the old API, make it file-scope static, and update
the documentation to describe the new API.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Full pattern must be quoted. So 'pat"t"ern attr' will give exactly
'pat"t"ern', not 'pattern'. Also clarify that leading whitespaces are
not part of the pattern and document comment syntax.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL matching function computes for two URLs whether they match not.
The match is performed by splitting up the URL into different parts and
then doing an exact comparison with the to-be-matched URL.
The main user of `urlmatch` is the configuration subsystem. It allows to
set certain configurations based on the URL which is being connected to
via keys like `http.<url>.*`. A common use case for this is to set
proxies for only some remotes which match the given URL. Unfortunately,
having exact matches for all parts of the URL can become quite tedious
in some setups. Imagine for example a corporate network where there are
dozens or even hundreds of subdomains, which would have to be configured
individually.
Allow users to write an asterisk '*' in place of any 'host' or
'subdomain' label as part of the host name. For example,
"http.https://*.example.com.proxy" sets "http.proxy" for all direct
subdomains of "https://example.com", e.g. "https://foo.example.com", but
not "https://foo.bar.example.com".
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This environment variable and configuration value allow to
override the autodetection of plink/tortoiseplink in case that
Git gets it wrong.
[jes: wrapped overly-long lines, factored out and changed
get_ssh_variant() to handle_ssh_variant() to accomodate the
change from the putty/tortoiseplink variables to
port_option/needs_batch, adjusted the documentation, free()d
value obtained from the config.]
Signed-off-by: Segev Finer <segev208@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
A crashing bug introduced in v2.11 timeframe has been found (it is
triggerable only in fast-import) and fixed.
* jk/clear-delta-base-cache-fix:
clear_delta_base_cache(): don't modify hashmap while iterating
"git tag" and "git verify-tag" learned to put GPG verification
status in their "--format=<placeholders>" output format.
* st/verify-tag:
t/t7004-tag: Add --format specifier tests
t/t7030-verify-tag: Add --format specifier tests
builtin/tag: add --format argument for tag -v
builtin/verify-tag: add --format to verify-tag
ref-filter: add function to print single ref_array_item
gpg-interface, tag: add GPG_VERIFY_OMIT_STATUS flag
