Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the COMPUTE_HEADER_DEPENDENCIES feature is turned on
automatically for compilers that support it (see v1.7.8-rc0~142^2~1,
2011-08-18), there is no easy way to force it off. For example,
setting COMPUTE_HEADER_DEPENDENCIES to the empty string in config.mak
just tells the makefile to treat it as undefined and run a test
command to see if the -MMD option is supported.
So allow setting COMPUTE_HEADER_DEPENDENCIES=no to explicitly force
the feature off. The new semantics:
- "yes" means to explicitly enable the feature
- "no" means to disable it
- "auto" means to autodetect
The default is still "auto". Any value other than these three will
cause the build to error out with a descriptive message so typos and
stale settings in config.mak don't result in mysterious behavior.
Makefile:1278: *** please set COMPUTE_HEADER_DEPENDENCIES to
yes, no, or auto (not "1"). Stop.
So now when someone using a compiler without -MMD support reports
trouble building git, you can reproduce it by running "make
COMPUTE_HEADER_DEPENDENCIES=no".
Suggested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the streaming filter API was introduced in v1.7.7-rc0~60^2~7
(2011-05-20), we forgot to add its header to LIB_H. Most translation
units depend on streaming.h via cache.h.
v1.7.5-rc0~48 (Fix sparse warnings, 2011-03-22) introduced undeclared
dependencies by url.o on url.h and thread-utils.o on thread-utils.h.
Noticed by make CHECK_HEADER_DEPENDENCIES=1.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mostly moves existing code from builtin/tag.c (for signing)
and builtin/verify-tag.c (for verifying) to a new gpg-interface.c
file to provide a more generic library interface.
- sign_buffer() takes a payload strbuf, a signature strbuf, and a signing
key, runs "gpg" to produce a detached signature for the payload, and
appends it to the signature strbuf. The contents of a signed tag that
concatenates the payload and the detached signature can be produced by
giving the same strbuf as payload and signature strbuf.
- verify_signed_buffer() takes a payload and a detached signature as
<ptr, len> pairs, and runs "gpg --verify" to see if the payload matches
the signature. It can optionally capture the output from GPG to allow
the callers to pretty-print it in a way more suitable for their
contexts.
"verify-tag" (aka "tag -v") used to save the whole tag contents as if it
is a detached signature, and fed gpg the payload part of the tag. It
relied on gpg to fail when the given tag is not signed but just is
annotated. The updated run_gpg_verify() function detects the lack of
detached signature in the input, and errors out without bothering "gpg".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since systems that omit strtoumax() will likely omit strtomax() too, and
likewise for strtoull() and strtoll(), we arrange for the make variables
NO_STRTOUMAX and NO_STRTOULL to cover both the signed and unsigned
functions, and define compatibility implementations for them.
Signed-off-by: Nick Alcock <nix@esperi.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we moved this header file in the code but forgot to
update the Makefile that refers to it.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both XSI and upstream Gnulib versions expects to find poll.h at
the root of some include path, not inside the sys-folder.
This helps us when upgrading Gnulib.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
The [ce]tags and cscope targets used to run "find" looking for any paths
that match '*.[chS]' to feed the list of source files to downstream xargs.
Use "git ls-files" if it is already available to us, and otherwise use a
tighter "find" expression that does not list directories and does not go
into our .git directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since mergetool--lib was split into multiple files in
v1.7.7-rc0~3^2~1 (2011-08-18), the Makefile takes care to reset umask
and use tar --no-owner when installing merge tool definitions to
$(gitexecdir)/mergetools/. Unfortunately it does not take into
account the possibility that the permission bits of the files being
copied might already be wrong.
Rather than fixing the "tar" incantation and making it even more
complicated, let's just use the "install" utility. This only means
losing the ability to install executables and subdirectories of
mergetools/, which wasn't used.
Noticed by installing from a copy of git checked out with umask 002.
Compare v1.6.0.3~81^2 (Fix permission bits on sources checked out with
an overtight umask, 2008-08-21).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "merge --log" and fmt-merge-msg to use branch description
information when merging a local topic branch into the mainline. The
description goes between the branch name label and the list of commit
titles.
The refactoring to share the common configuration parsing between
merge and fmt-merge-msg needs to be made into a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
* rr/revert-cherry-pick-continue:
builtin/revert.c: make commit_list_append() static
revert: Propagate errors upwards from do_pick_commit
revert: Introduce --continue to continue the operation
revert: Don't implicitly stomp pending sequencer operation
revert: Remove sequencer state when no commits are pending
reset: Make reset remove the sequencer state
revert: Introduce --reset to remove sequencer state
revert: Make pick_commits functionally act on a commit list
revert: Save command-line options for continuing operation
revert: Save data for continuing after conflict resolution
revert: Don't create invalid replay_opts in parse_args
revert: Separate cmdline parsing from functional code
revert: Introduce struct to keep command-line options
revert: Eliminate global "commit" variable
revert: Rename no_replay to record_origin
revert: Don't check lone argument in get_encoding
revert: Simplify and inline add_message_to_msg
config: Introduce functions to write non-standard file
advice: Introduce error_resolve_conflict
The g+s bit on directories to make group ownership inherited is a
SysVism --- BSD and most of its descendants do not need it since they
do the sane thing by default without g+s. In fact, on some
filesystems (but not all --- tmpfs works this way but UFS does not),
the kernel of FreeBSD does not even allow non-root users to set setgid
bit on directories and produces errors when one tries:
$ git init --shared dir
fatal: Could not make /tmp/dir/.git/refs writable by group
Since the setgid bit would only mean "do what you were going to do
already", it's better to avoid setting it. Accordingly, ever since
v1.5.5-rc0~59^2 (Do not use GUID on dir in git init --share=all on
FreeBSD, 2008-03-05), git on true FreeBSD has done exactly that. Set
DIR_HAS_BSD_GROUP_SEMANTICS in the makefile for GNU/kFreeBSD, too, so
machines that use glibc with the kernel of FreeBSD get the same fix.
This fixes t0001-init.sh and t1301-shared-repo.sh on GNU/kFreeBSD
when running tests with --root pointing to a directory that uses
tmpfs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule code recently grew generic code to build a
dynamic argv array. Many other parts of the code can reuse
this, too, so let's make it generically available.
There are two enhancements not found in the original code:
1. We now handle the NULL-termination invariant properly,
even when no strings have been pushed (before, you
could have an empty, NULL argv). This was not a problem
for the submodule code, which always pushed at least
one argument, but was not sufficiently safe for
generic code.
2. There is a formatted variant of the "push" function.
This is a convenience function which was not needed by
the submodule code, but will make it easier to port
other users to the new code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the helper function and the type definition of the iterator
function it uses out of builtin/fetch.c into a separate source and a
header file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fk/use-kwset-pickaxe-grep-f:
obstack: Fix portability issues
Use kwset in grep
Use kwset in pickaxe
Adapt the kwset code to Git
Add string search routines from GNU grep
Add obstack.[ch] from EGLIBC 2.10
The Makefile enables CHECK_HEADER_DEPENDENCIES when the
compiler supports generating header dependencies.
Make the check use the same flags as the invocation
to avoid a false positive when user-configured compiler
flags contain incompatible options.
For example, without this patch, trying to build universal
binaries on a Mac using CFLAGS='-arch i386 -arch x86_64'
produces:
gcc-4.2: -E, -S, -save-temps and -M options are
not allowed with multiple -arch flags
While at it, remove "sh -c" in the command passed to $(shell);
at this point in the Makefile, SHELL has already been set to
a sensible shell and it is better not to override that.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/difftool-mergtool-refactor:
mergetools/meld: Use '--output' when available
mergetool--lib: Refactor tools into separate files
mergetool--lib: Make style consistent with git
difftool--helper: Make style consistent with git
Individual merge tools are now defined in a mergetools/$tool
file which is sourced at runtime.
The individual files are installed into $(git --exec-path)/mergetools/.
New tools can be added by creating a new file instead of editing the
git-mergetool--lib.sh scriptlet.
http://thread.gmane.org/gmane.comp.version-control.git/134906/focus=135006
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously you had to manually define COMPUTE_HEADER_DEPENDENCIES to
enable this feature. It seemed a bit sad that such a useful feature
had to be enabled manually.
To avoid the small overhead we don't do the auto-detection if
COMPUTE_HEADER_DEPENDENCIES is already set.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/histogram-diff:
xdiff/xhistogram: drop need for additional variable
xdiff/xhistogram: rely on xdl_trim_ends()
xdiff/xhistogram: rework handling of recursed results
xdiff: do away with xdl_mmfile_next()
Make test number unique
xdiff/xprepare: use a smaller sample size for histogram diff
xdiff/xprepare: skip classification
teach --histogram to diff
t4033-diff-patience: factor out tests
xdiff/xpatience: factor out fall-back-diff function
xdiff/xprepare: refactor abort cleanups
xdiff/xprepare: use memset()
Currently parse-options.o pulls quite a big bunch of dependencies.
his complicates it's usage in contrib/ because it pulls external
dependencies and it also increases executables size.
Split off less generic and more internal to git part of
parse-options.c to parse-options-cb.c.
Move prefix_filename function from setup.c to abspath.c. abspath.o
and wrapper.o pull each other, so it's unlikely to increase the
dependencies. It was a dependency of parse-options.o that pulled
many others.
Now parse-options.o pulls just abspath.o, ctype.o, strbuf.o, usage.o,
wrapper.o, libc directly and strlcpy.o indirectly.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To explicitly remove the sequencer state for a fresh cherry-pick or
revert invocation, introduce a new subcommand called "--reset" to
remove the sequencer state.
Take the opportunity to publicly expose the sequencer paths, and a
generic function called "remove_sequencer_state" that various git
programs can use to remove the sequencer state in a uniform manner;
"git reset" uses it later in this series. Introducing this public API
is also in line with our long-term goal of eventually factoring out
functions from revert.c into a generic commit sequencer.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename git-http-pull to git-http-fetch. This was passed over in 215a7ad
(Big tool rename, Wed Sep 7 17:26:23 2005 -0700).
Also, distinguish between dumb and smart in flag docs, as the "warnings"
in NO_CURL and NO_EXPACT are no longer accurate given the introduction
of smart http(s).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a $(uname_S) case for Minix with the correct options.
Minix's linker needs all libraries specified explicitly.
Add NEEDS_SSL_WITH_CURL to add -lssl when using -lcurl.
Add NEEDS_IDN_WITH_CURL to add -lidn when using -lcurl.
When NEEDS_SSL_WITH_CURL is defined and NEEDS_CRYPTO_WITH_SSL
is defined, add -lcrypt to CURL_LIBCURL.
Change OPENSSL_LINK to OPENSSL_LIBSSL in the
NEEDS_CRYPTO_WITH_SSL conditional in the libopenssl
section. Libraries go in OPENSSL_LIBSSL, OPENSSL_LINK
is for linker flags.
Signed-off-by: Thomas Cort <tcort@minix3.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/gcc46-profile-feedback:
Add explanation of the profile feedback build to the README
Add profile feedback build to git
Add option to disable NORETURN
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show
that it is faster than its --patience cousin, as well as the default
Meyers algorithm.
The implementation has been reworked to use structs and pointers,
instead of bitmasks, thus doing away with JGit's 2^28 line limit.
We also use xdiff's default hash table implementation (xdl_hash_bits()
with XDL_HASHLONG()) for convenience.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/streaming:
sha1_file: use the correct type (ssize_t, not size_t) for read-style function
streaming: read loose objects incrementally
sha1_file.c: expose helpers to read loose objects
streaming: read non-delta incrementally from a pack
streaming_write_entry(): support files with holes
convert: CRLF_INPUT is a no-op in the output codepath
streaming_write_entry(): use streaming API in write_entry()
streaming: a new API to read from the object store
write_entry(): separate two helper functions out
unpack_object_header(): make it public
sha1_object_info_extended(): hint about objects in delta-base cache
sha1_object_info_extended(): expose a bit more info
packed_object_info_detail(): do not return a string
Some profiling tools (e.g., google-perftools and mutrace) work by
linking in a new library into the executables. When using these tools
it is convenient to only relink instead of doing a full make clean;
make cycle.
This change complements the auto-detection of changes to CFLAGS that
we already have. Tracking of more variables that affect the build can
be added when the need arise.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a gcc profile feedback build option "profile-all" to the main
Makefile. It simply runs the test suite to generate feedback data and the
recompiles the main executables with that. The basic structure is similar
to the existing gcov code.
gcc is often able to generate better code with profile feedback data. The
training load also doesn't need to be too similar to the actual load, it
still gives benefits.
The test suite run is unfortunately quite long. It would be good to find a
suitable subset that runs faster and still gives reasonable feedback.
For now the test suite runs single threaded (I had some trouble running
the test suite with -jX)
I tested it with git gc and git blame kernel/sched.c on a Linux kernel
tree. For gc I get about 2.7% improvement in wall clock time by using the
feedback build, for blame about 2.4%. That's not gigantic, but not shabby
either for a very small patch.
If anyone has any favourite CPU intensive git benchmarks feel free to try
them too.
I hope distributors will switch to use a feedback build in their packages.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a bug in gcc 4.6+ it can crash when doing profile feedback
with a noreturn function pointer
(http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49299)
This adds a Makefile variable to disable noreturns.
[Patch by Junio, description by Andi Kleen]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, on Interix, libsuacomp is required for building (see [1]).
Since suacomp provides poll() and inttypes.h for all interix versions,
remove NO_*=YesPlease that are no longer necessary.
Interix versions 3 and 5 miss struct sockaddr_storage, so make git
avoid using it.
Same for FNMATCH_CASEFOLD, which does not exist for Interix 3 and 5.
[1] http://news.gmane.org/find-root.php?message_id=%3c4DDF4440.4040405%40gentoo.org%3e
Signed-off-by: Markus Duft <mduft@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/delta-applier:
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
Conflicts:
Makefile
vcs-svn/LICENSE
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* jk/haves-from-alternate-odb:
receive-pack: eliminate duplicate .have refs
bisect: refactor sha1_array into a generic sha1 list
refactor refs_from_alternate_cb to allow passing extra data
* kk/maint-prefix-in-config-mak:
Honor $(prefix) set in config.mak* when defining ETC_GIT*
Revert "Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir"
Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir
* db/svn-fe-code-purge:
vcs-svn: drop obj_pool
vcs-svn: drop treap
vcs-svn: drop string_pool
vcs-svn: pass paths through to fast-import
Conflicts:
vcs-svn/fast_export.c
vcs-svn/fast_export.h
vcs-svn/repo_tree.c
vcs-svn/repo_tree.h
vcs-svn/string_pool.c
vcs-svn/svndump.c
vcs-svn/trp.txt
Given an object name, use open_istream() to get a git_istream handle
that you can read_istream() from as if you are using read(2) to read
the contents of the object, and close it with close_istream() when
you are done.
Currently, we do not do anything fancy--it just calls read_sha1_file()
and keeps the contents in memory as a whole, and carve it out as you
request with read_istream().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a generally useful abstraction, so let's let others
make use of it. The refactoring is more or less a straight
copy; however, functions and struct members have had their
names changed to match string_list, which is the most
similar data structure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We usually keep these lists in sorted order, but the last
few entries were just tacked on the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow NO_GECOS_IN_PWENT to be defined in the Makefile for platforms that
lack the pw_gecos field in their "struct passwd", in which case the
uppercased user name is used instead via the standard '&' replacement
mechanism.
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kk/maint-prefix-in-config-mak:
Honor $(prefix) set in config.mak* when defining ETC_GIT*
Revert "Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir"
Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir
Otherwise we would fail to rebuild correctly when this option was
changed between $(MAKE) invocations, and more importantly, $(MAKE) test
would not pass it down and t/test-lib.sh would not set the LIBPCRE
prerequisite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "pot" target to also extract strings from our $(SCRIPT_SH)
files with xgettext(1).
Note that due to Jonathan Nieder's trick of doing "mv $@+ $@" at the
end of the target the "pot" target will now warn:
$ make pot
XGETTEXT po/git.pot
po/git.pot+: warning: Charset "CHARSET" is not a portable encoding name.
Message conversion to user's charset might not work.
This warnings is emitted because xgettext is writing into a non-*.pot
file, it's harmless however. The content that's written out is
equivalent to what it would be if we were writing directly into an
existing POT file with --join-existing.
As part of this change I've eliminated the && chain between xgettext
calls, this is incompatible with $(QUIET_XGETTEXT), if the && is left
in it'll emit:
/bin/sh: @echo: not found
Since it's redundant (the Makefile will stop if there's an error) I've
removed it altogether.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a no-op wrapper library for Git's shell scripts. To split up the
gettext series I'm first submitting patches to gettextize the source
tree before I add any of the Makefile and Shell library changes needed
to actually use them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git-sh-i18n--envsubst program which is a stripped-down version
of the GNU envsubst(1) program that comes with GNU gettext for use in
the eval_gettext() fallback.
We need a C helper program because implementing eval_gettext() purely
in shell turned out to be unworkable. Digging through the Git mailing
list archives will reveal two shell implementations of eval_gettext
that are almost good enough, but fail on an edge case which is tested
for in the tests which are part of this patch.
These are the modifications I made to envsubst.c as I turned it into
sh-i18n--envsubst.c:
* Added our git-compat-util.h header for xrealloc() and friends.
* Removed inclusion of gettext-specific headers.
* Removed most of main() and replaced it with my own. The modified
version only does option parsing for --variables. That's all it
needs.
* Modified error() invocations to use our error() instead of
error(3).
* Replaced the gettext XNMALLOC(n, size) macro with just
xmalloc(n). Since XNMALLOC() only allocated char's.
* Removed the string_list_destroy function. It's redundant (also in
the upstream code).
* Replaced the use of stdbool.h (a C99 header) by doing the following
replacements on the code:
* s/bool/unsigned short int/g
* s/true/1/g
* s/false/0/g
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notice that the prefix specified for the build influenced the definitions
of ETC_GITCONFIG and ETC_GITATTRIBUTES only when it was exactly '/usr'.
Kacper Kornet noticed that this was furthermore only the case when the
build was triggered using 'make prefix=/usr', i.e., the prefix was given
on the command line; it did not work when the prefix was specified in
config.mak because this file is included much later in the Makefile.
To fix this, move the conditional after the inclusion of config.mak.
Additionally, it is desirable to specify the etc directory for a build
(for example, a build with prefix /usr/local may still want to have the
system configuration in /etc/gitconfig). For this purpose, promote the
variable 'sysconfdir' from a helper variable to a configuration
variable. The prefix check that was moved must now be wrapped so that it
does not override sysconfdir setting given in config.mak.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is gitweb/Makefile, let's leave only "gitweb" and
"install-gitweb" targets in main Makefile. Those targets just
delegate to gitweb's Makefile.
Requested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c0cb4ed (git-instaweb: Configure it to work with new gitweb
structure, 2010-05-28) git-instaweb does not re-create gitweb.cgi
etc., but makes use of installed gitweb. Therefore simplify
git-instaweb dependency on gitweb subsystem in main Makefile from
'gitweb/gitweb.cgi gitweb/static/gitweb.css gitweb/static/gitweb.js'
to simply 'gitweb'.
This is preparation for splitting gitweb.perl script, and for
splitting gitweb.js (to be reassembled / combined on build). This way
we don't have to duplicate parts of gitweb/Makefile in main
Makefile... it is also more correct description of git-instaweb
dependency.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/info-man-path:
Documentation: clarify meaning of --html-path, --man-path, and --info-path
git: add --info-path and --man-path options
Conflicts:
Makefile
Similar to the way the --html-path option lets UI programs learn where git
has its HTML documentation pages, expose the other two paths used to store
the documentation pages of these two types.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
Definitions of ETC_GITCONFIG, ETC_GITATTRIBUTES and sysconfdir depend on
value of prefix. As prefix can be changed in config.mak.autogen, all if
blocks with conditions based on prefix should be placed after the file
is included in Makefile.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, sparse issues the following errors:
attr.c:472:43: error: undefined identifier 'ETC_GITATTRIBUTES'
config.c:821:43: error: undefined identifier 'ETC_GITCONFIG'
exec_cmd.c:14:37: error: undefined identifier 'PREFIX'
exec_cmd.c:83:28: error: undefined identifier 'GIT_EXEC_PATH'
builtin/help.c:328:46: error: undefined identifier 'GIT_MAN_PATH'
builtin/help.c:374:40: error: undefined identifier 'GIT_INFO_PATH'
builtin/help.c:382:45: error: undefined identifier 'GIT_HTML_PATH'
git.c:96:42: error: undefined identifier 'GIT_HTML_PATH'
git.c:241:35: error: invalid initializer
http.c:293:43: error: undefined identifier 'GIT_HTTP_USER_AGENT'
which is caused by not passing the target-specific additions to
the EXTRA_CPPFLAGS variable to cgcc.
In order to fix the problem, we define a new sparse target which
depends on a set of non-existent "sparse object" files (*.sp)
which correspond to the set of C source files. In addition to the
new target, we also provide a new pattern rule for "creating" the
sparse object files from the source files by running cgcc. This
allows us to add '*.sp' to the rules setting the target-specific
EXTRA_CPPFLAGS variable, which is then included in the new pattern
rule to run cgcc.
Also, we change the 'check' target to re-direct the user to the
new sparse target.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add a new "merge-file.h" header
containing the extern declaration of the merge_file() function,
and include the header in the source files that require the
declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cgcc is the recommended way to run sparse, since it provides
many -Defines suitable for the given gcc platform. Using an
"cgcc -no-compile" command runs sparse, with all the platform
specific definitions provided by cgcc, without also invoking
gcc.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Q_() wrapper added by 0c9ea33 (i18n: add stub Q_() wrapper for
ngettext, 2011-03-09) needs to be noticed by xgettext.
Add an appropriate --keyword option to the Makefile, so that "make pot"
would notice the strings in the plural form marked with the wrapper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A delta in the subversion delta (svndiff0) format consists of the
magic bytes SVN\0 followed by a sequence of windows of a certain well
specified format (starting with five integers).
Add an svndiff0_apply function and test-svn-fe -d commandline tool to
parse such a delta in the special case of not including any windows.
Later patches will add features to turn this into a fully functional
delta applier for svn-fe to use to parse the streams produced by
"svnrdump dump" and "svnadmin dump --deltas".
The content of symlinks starts with the word "link " in Subversion's
worldview, so we need to be able to prepend that text to input for the
sake of delta application. So initialization of the input state of
the delta preimage is left to the calling program, giving callers a
chance to seed the buffer with text of their choice.
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Improved-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Each section of a Subversion-format delta only requires examining (and
keeping in random-access memory) a small portion of the preimage. At
any moment, this portion starts at a certain file offset and has a
well-defined length, and as the delta is applied, the portion advances
from the beginning to the end of the preimage. Add a move_window
function to keep track of this view into the preimage.
You can use it like this:
buffer_init(f, NULL);
struct sliding_view window = SLIDING_VIEW_INIT(f);
move_window(&window, 3, 7); /* (1) */
move_window(&window, 5, 5); /* (2) */
move_window(&window, 12, 2); /* (3) */
strbuf_release(&window.buf);
buffer_deinit(f);
The data structure is called sliding_view instead of _window to
prevent confusion with svndiff0 Windows.
In this example, (1) reads 10 bytes and discards the first 3;
(2) discards the first 2, which are not needed any more; and (3) skips
2 bytes and reads 2 new bytes to work with.
When move_window returns, the file position indicator is at position
window->off + window->width and the data from positions window->off to
the current file position are stored in window->buf.
This function performs only sequential access from the input file and
never seeks, so it can be safely used on pipes and sockets.
On end-of-file, move_window silently reads less than the caller
requested. On other errors, it prints a message and returns -1.
Helped-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
As the svn import infrastructure evolves, it's getting to be a pain to
tell by eye what files were added or removed from a dependency line
like
VCSSVN_OBJS = vcs-svn/string_pool.o vcs-svn/line_buffer.o \
vcs-svn/repo_tree.o vcs-svn/fast_export.o vcs-svn/svndump.o
So use a style with one entry per line instead, like the existing
BUILTIN_OBJS:
# protect against environment
VCSSVN_OBJS =
...
VCSSVN_OBJS += vcs-svn/string_pool.o
VCSSVN_OBJS += vcs-svn/line_buffer.o
...
which is readable on its own and produces nice, clear diffs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This reverts commit 951f316470
(Add treap implementation, 2010-08-09). The string_pool was
trp.h's last user.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This reverts commit 1d73b52f5b
(Add string-specific memory pool, 2010-08-09). Now that svn-fe
does not need to maintain a growing collection of strings (paths)
over a long period of time, the string_pool is not needed.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
After the builtin/ move 'make check' doesn't cover the builtin/
directory. We could just add builtin/*.c but lets just use GIT_OBJS
instead so we cover future movement of the source files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-basic:
i18n: "make distclean" should clean up after "make pot"
i18n: Makefile: "pot" target to extract messages marked for translation
i18n: add stub Q_() wrapper for ngettext
i18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set
i18n: add GETTEXT_POISON to simulate unfriendly translator
i18n: add no-op _() and N_() wrappers
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
In the spirit of v1.5.0.2~21 (Check for PRIuMAX rather than
NO_C99_FORMAT in fast-import.c, 2007-02-20), use PRIuMAX from
git-compat-util.h on all platforms instead of C99-specific formats
like %zu with dangerous fallbacks to %u or %lu.
So now C99-challenged platforms can build git without provoking
warnings or errors from printf, even if pointers do not have the same
size as an int or long.
The need for a fallback PRIuMAX is detected in git-compat-util.h with
"#ifndef PRIuMAX". So while at it, simplify the Makefile and configure
script by eliminating the NO_C99_FORMAT knob altogether.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in "make distclean" and not "make clean" to avoid needlessly
changing the POT-Creation-Date in the following scenario:
make clean; # cleaning up after an old build
git pull
make pot; # regenerate po template if necessary
msgmerge po/my_language.po po/git.pot
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add rules to generate a template (po/git.pot) listing messages marked
for translation in the C portion of git.
To get started translating, just run "make pot".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the GETTEXT_POISON facility so it is activated at run time
instead of compile time. If the GIT_GETTEXT_POISON environment
variable is set, _(msg) will result in gibberish as before; but if the
GIT_GETTEXT_POISON variable is not set, it will return the message for
human-readable output. So the behavior of mistranslated and
untranslated git can be compared without rebuilding git in between.
For simplicity we always set the GIT_GETTEXT_POISON variable in tests.
This does not affect builds without the GETTEXT_POISON compile-time
option set, so non-i18n git will not be slowed down.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new GETTEXT_POISON compile-time parameter to make _(msg) always
return gibberish. So now you can run
make GETTEXT_POISON=YesPlease
to get a copy of git that functions correctly (one hopes) but produces
output that is in nobody's native language at all.
This is a debugging aid for people who are working on the i18n part of
the system, to make sure that they are not marking plumbing messages
that should never be translated with _().
As new strings get marked for translation, naturally a number of tests
will be broken in this mode. Tests that depend on output from
Porcelain will need to be marked with the new C_LOCALE_OUTPUT test
prerequisite. Newly failing tests that do not depend on output from
Porcelain would be bugs due to messages that should not have been
marked for translation.
Note that the string we're using ("# GETTEXT POISON #") intentionally
starts the pound sign. Some of Git's tests such as
t3404-rebase-interactive.sh rely on interactive editing with a fake
editor, and will needlessly break if the message doesn't start with
something the interactive editor considers a comment.
A future patch will fix fix the underlying cause of that issue by
adding "#" characters to the commit advice automatically.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The _ function is for translating strings into the user's chosen
language. The N_ macro just marks translatable strings for the
xgettext(1) tool without translating them; it is intended for use in
contexts where a function call cannot be used. So, for example:
fprintf(stderr, _("Expansion of alias '%s' failed; "
"'%s' is not a git command\n"),
cmd, argv[0]);
and
const char *unpack_plumbing_errors[NB_UNPACK_TREES_ERROR_TYPES] = {
/* ERROR_WOULD_OVERWRITE */
N_("Entry '%s' would be overwritten by merge. Cannot merge."),
[...]
Define such _ and N_ in a new gettext.h and include it in cache.h, so
they can be used everywhere. Each just returns its argument for now.
_ is a function rather than a macro like N_ to avoid the temptation to
use _("foo") as a string literal (which would be a compile-time error
once _(s) expands to an expression for the translation of s).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fnmatch() on HP-UX does not support the GNU FNM_CASEFOLD extension,
so set NO_FNMATCH_CASEFOLD to use the internal fnmatch implementation.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase.sh recently started sourcing
git-rebase--interactive.sh instead of executing it, executable bit of
the latter file should have been turned off and it should have been
moved from SCRIPT_SH to SCRIPT_LIB in the Makefile. Its two new
siblings, git-rebase--am.sh and git-rebase--merge.sh (whose executable
bits are already off) should also be moved to SCRIPT_LIB in the
Makefile.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for am-based rebase to git-rebase--am.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for merge-based rebase to git-rebase--merge.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
When setup_work_tree() is called, it moves cwd to $GIT_WORK_TREE and
makes internal copy of $GIT_WORK_TREE absolute. The environt variable,
if set by user, remains unchanged. If the variable is relative, it is
no longer correct because its base dir has changed.
Instead of making $GIT_WORK_TREE absolute too, we just say "." and let
subsequent git processes handle it.
Reported-by: Michel Briand <michelbriand@free.fr>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
IRIX's fnmatch() does not support the GNU FNM_CASEFOLD extension, so set
NO_FNMATCH_CASEFOLD so that the internal fnmatch implementation will be
used.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when creating a temporary file failed, a generic 'Unable to create
temporary file' message was printed. In some cases this could lead to
confusion as to which directory should be checked for correct permissions etc.
This patch adds the template for the temporary filename to the error message,
converting it to an absolute path if needed. A test verifies that the template
is indeed printed when pointing to a nonexistent or unwritable directory.
A copy of the original template is made in case mkstemp clears the template.
Signed-off-by: Arnout Engelen <arnouten@bzzt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.7.3.4
use persistent memory for rejected paths
do not overwrite files in leading path
lstat_cache: optionally return match_len
add function check_ok_to_remove()
t7607: add leading-path tests
t7607: use test-lib functions and check MERGE_HEAD
Do not link with -lcrypto under NO_OPENSSL
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
transport-helper.o gained a dependency on thread-utils.h in
7851b1e (remote-fd/ext: finishing touches after code review,
2010-11-17).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The msvc linker complains about external symbols referenced by
the new poll() emulation code. In particular, it complains about
the DispatchMessage(), PeekMessage(), TranslateMessage() and
MsgWaitForMultipleObjects() functions.
In order to satisfy the external references, we link against the
user32.lib library.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 401857c (imap-send: link against libcrypto for HMAC and others,
2010-11-24) we started linking imap-send unconditionally with -lcrypto by
mistake; disable this when we are building under NO_OPENSSL.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
The vcs-svn tests (test-treap.o et al) depend on the vcs-svn
headers for declarations and inline functions. Declare the
dependency. While at it, declare a dependency of the vcs-svn
objects (vcs-svn/string_pool.o et al) on $(LIB_H) to reflect use
within the vcs-svn library of git-compat-util.h and cache.h.
Without this change, tweaks to inline functions in those headers
do not provoke rebuilds of the corresponding tests[*], making
such changes unnecessarily difficult to test.
Before:
$ touch vcs-svn/*.h && make test-treap
$
After:
$ touch vcs-svn/*.h && make test-treap
CC test-treap.o
LINK test-treap
$
[*] unless COMPUTE_HEADER_DEPENDENCIES is enabled
Detected with "make CHECK_HEADER_DEPENDENCIES=1".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If someone runs "git st", the command "git status" is not suggested
because it's not one of the closest levenshtein-neighbour.
Reserve the distance of 0 for common commands where the entered command
is a prefixe, as these are often more likely to be what the user meant.
This way, "git status" is the first suggestion, while a list of possible
typos are still suggested as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
* jj/icase-directory:
Support case folding in git fast-import when core.ignorecase=true
Support case folding for git add when core.ignorecase=true
Add case insensitivity support when using git ls-files
Add case insensitivity support for directories when using git status
Case insensitivity support for .gitignore via core.ignorecase
Add string comparison functions that respect the ignore_case variable.
Makefile & configure: add a NO_FNMATCH_CASEFOLD flag
Makefile & configure: add a NO_FNMATCH flag
Conflicts:
Makefile
config.mak.in
configure.ac
fast-import.c
This allows non-http/curl users to access it too (eg. http-backend.c).
Update include headers in end_url_with_slash() users too.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the ASCIIDOC8 and ASCIIDOC_NO_ROFF knobs were built,
many people were still on asciidoc 7 and using older
versions of docbook-xsl. These days, even the almost
2-year-old Debian stable needs these knobs turned.
So let's turn them by default. The new knobs ASCIIDOC7 and
ASCIIDOC_ROFF can be used to get the old behavior if people
are on older systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
imap-send: link against libcrypto for HMAC and others
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
mingw: do not set errno to 0 on success
When using stricter linkers, such as GNU gold or Darwin ld, transitive
dependencies are not counted towards symbol resolution. If we don't link
imap-send to libcrypto, we'll have undefined references to the HMAC_*,
EVP_* and ERR_* functions families.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mingw-runtime implemenation of opendir, readdir and closedir
sets errno to 0 on success, something that POSIX explicitly
forbids. 3ba7a06 ("A loose object is not corrupt if it cannot be
read due to EMFILE") introduce a dependency on this behaviour,
leading to a broken "git clone" on Windows.
compat/mingw.c contains an implementation of readdir, and
compat/msvc.c contains implementations of opendir and closedir.
Move these to compat/win32/dirent.[ch], and change to our own DIR
structure at the same time.
This provides a generic Win32-implementation of opendir, readdir
and closedir which works on both MinGW and MSVC and does not reset
errno, and as a result git clone is working again on Windows.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This initial implementation of 'git notes merge' only handles the trivial
merge cases (i.e. where the merge is either a no-op, or a fast-forward).
The patch includes testcases for these trivial merge cases.
Future patches will extend the functionality of 'git notes merge'.
This patch has been improved by the following contributions:
- Stephen Boyd: Simplify argc logic
- Stephen Boyd: Use test_commit
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
- Jonathan Nieder: Add constants for common verbosity values
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Jonathan Nieder: Remove extraneous show() function
- Jonathan Nieder: Clarify handling of empty/missing notes ref in notes_merge()
- Junio C Hamano: fixup minor style issues
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Programs using xmalloc() but not git_inflate() require -lz on the
linker command line because git_inflate() is in the same translation
unit as xmalloc().
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not supply the POSIX-functions fork(), setuuid(), setgid(),
setsid() and initgroups(). Error out if --user or --detach is specified
when if so.
MinGW doesn't have prototypes and headers for inet_ntop and inet_pton,
so include our implementation instead. MSVC does, so avoid doing so
there.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows doesn't have inet_pton and inet_ntop, so
add prototypes in git-compat-util.h for them.
At the same time include git-compat-util.h in
the sources for these functions, so they use the
network-wrappers from there on Windows.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Syslog does not usually exist on Windows, so implement our own using
Window's ReportEvent mechanism.
Strings containing "%1" gets expanded into them selves by ReportEvent,
resulting in an unreadable string. "%2" and above is not a problem.
Unfortunately, on Windows an IPv6 address can contain "%1", so expand
"%1" to "% 1" before reporting. "%%1" is also a problem for ReportEvent,
but that string cannot occur in an IPv6 address.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* add required build options to Makefile.
* introduce new NO_INTTYPES_H for systems lacking inttypes; code
includes stdint.h instead, if this is set.
* introduce new NO_SYS_POLL_H for systems lacking sys/poll.h; code
includes poll.h instead, if this is set.
* introduce NO_INITGROUPS. initgroups() call is simply omitted.
Signed-off-by: Markus Duft <mduft@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper invokes external command and passes raw smart transport
stream through it. This is useful for instance for invoking ssh with
one-off odd options, connecting to git services in unix domain
sockets, in abstract namespace, using TLS or other secure protocols,
etc...
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper reflects raw smart remote transport stream back to the
calling program. This is useful for example if some UI wants to handle
ssh itself and not use hacks via GIT_SSH.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some platforms (like Solaris) there is a fnmatch, but it doesn't
support the GNU FNM_CASEFOLD extension that's used by the
jj/icase-directory series' fnmatch_icase wrapper.
Change the Makefile so that it's now possible to set
NO_FNMATCH_CASEFOLD=YesPlease on those systems, and add a configure
probe for it.
Unlike the NO_REGEX check we don't add AC_INCLUDES_DEFAULT to our
headers. This is because on a GNU system the definition of
FNM_CASEFOLD in fnmatch.h is guarded by:
#if !defined _POSIX_C_SOURCE || _POSIX_C_SOURCE < 2 || defined _GNU_SOURCE
One of the headers AC_INCLUDES_DEFAULT includes ends up defining one
of those, so if we'd use it we'd always get
NO_FNMATCH_CASEFOLD=YesPlease on GNU systems, even though they have
FNM_CASEFOLD.
When checking the flags we use:
ifdef NO_FNMATCH
...
else
ifdef NO_FNMATCH_CASEFOLD
...
endif
endif
The "else" so that we don't link against compat/fnmatch/fnmatch.o
twice if both NO_FNMATCH and NO_FNMATCH_CASEFOLD are defined.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows and MinGW both lack fnmatch() in their C library and needed
compat/fnmatch, but they had duplicate code for adding the compat
function, and there was no Makefile flag or configure check for
fnmatch.
Change the Makefile it so that it's now possible to compile the compat
function with a NO_FNMATCH=YesPlease flag, and add a configure probe
for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On case insensitive filesystems, "tags" and "TAGS" target will try to
overwrite the same file. Allow MinGW to use "ETAGS" instead.
These two targets do produce real files; do not put them on .PHONY target
list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the git make process so that everything's rebuilt if the CC is
changed. Before we wouldn't rebuilt if e.g. the CC variable was
changed from gcc to clang.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define the nedmalloc feature configuration macros for nedmalloc.o, only.
This keeps assert(3) working for the rest of the git source; it was
turned off for nedmalloc users before by defining NDEBUG globally.
Also remove -DUSE_NED_ALLOCATOR as this macro isn't used anywhere.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The IRIX 6.5 regex.h header file defines REG_STARTEND, but the feature does
not appear to work. Since REG_STARTEND is required for proper functioning
of git-grep, set NO_REGEX and use the alternative regex libraries in compat/
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
* ab/compat-regex:
Fix compat/regex ANSIfication on MinGW
autoconf: regex library detection typofix
autoconf: don't use platform regex if it lacks REG_STARTEND
t/t7008-grep-binary.sh: un-TODO a test that needs REG_STARTEND
compat/regex: get rid of old-style definition
compat/regex: define out variables only used under RE_ENABLE_I18N
Change regerror() declaration from K&R style to ANSI C (C89)
compat/regex: get the gawk regex engine to compile within git
compat/regex: use the regex engine from gawk for compat
Conflicts:
compat/regex/regex.c
Allow gitattributes to be set globally and system wide. This way, settings
for particular file types can be set in one place and apply for all user's
repositories.
The location of system-wide attributes file is $(prefix)/etc/gitattributes.
The location of the global file can be configured by setting
core.attributesfile.
Some parts of the code were copied from the implementation of the same
functionality in config.c.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/svn-fe:
t/t9010-svn-fe.sh: add an +x bit to this test
t9010 (svn-fe): avoid symlinks in test
t9010 (svn-fe): use Unix-style path in URI
vcs-svn: Avoid %z in format string
vcs-svn: Rename dirent pool to build on Windows
compat: add strtok_r()
treap: style fix
vcs-svn: remove build artifacts on "make clean"
svn-fe manual: Clarify warning about deltas in dump files
Update svn-fe manual
SVN dump parser
Infrastructure to write revisions in fast-export format
Add stream helper library
Add string-specific memory pool
Add treap implementation
Add memory pool library
Introduce vcs-svn lib
* bc/use-more-hardlinks-in-install:
Makefile: make hard/symbolic links for non-builtins too
Makefile: link builtins residing in bin directory to main git binary too
We need to define -DGAWK -DNO_MBSUPPORT so that the gawk regex engine
will compile, and include stdio.h and stddef.h in regex.h. Gawk itself
includes these headers before it includes the regex.h header.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you customize CC to use a different version of gcc, most likely you
also need to use a different version of gcov. Make it configurable.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a target to generate a detailed HTML report for the entire Git
codebase using Devel::Cover's cover(1) tool. Output it in
cover_db_html instead of the default cover_db, so that it isn't mixed
up with our raw report files.
The target depends on the coverage-report-cover-db target, it may be
run redundantly if it was previously run. But the HTML output won't be
affected by running gcov2perl twice, so I didn't try to avoid that
small redundancy.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a target to convert the *.gcov files to a Devel::Cover
database. That database can subsequently be formatted by the cover(1)
tool which is included with Devel::Cover.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the coverage-report target so that it doesn't generate the
coverage-untested-functions file by default. I'm adding more targets
for doing various things with the gcov files, and they shouldn't all
run by default.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generate profiling files in all the $(OBJECTS) dirs. Aggregate
results from there, and add them to the corresponding clean target.
Also expand the gcov arguments. Generate reports for things like "x()
|| y()" using --all-blocks, and add --preserve-paths since we're
profiling in subdirectories now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not have strtok_r (and while it does have an identical
strtok_s, but it is not obvious how to use it). Grab an
implementation from glibc.
The svn-fe tool uses strtok_r to parse paths.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
svndump parses data that is in SVN dumpfile format produced by
`svnadmin dump` with the help of line_buffer and uses repo_tree and
fast_export to emit a git fast-import stream.
Based roughly on com.hydrografix.svndump 0.92 from the SvnToCCase
project at <http://svn2cc.sarovar.org/>, by Stefan Hegny and
others.
[rr: allow input from files other than stdin]
[jn: with test, more error reporting]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
repo_tree maintains the exporter's state and provides a facility to to
call fast_export, which writes objects to stdout suitable for
consumption by fast-import.
The exported functions roughly correspond to Subversion FS operations.
. repo_add, repo_modify, repo_copy, repo_replace, and repo_delete
update the current commit, based roughly on the corresponding
Subversion FS operation.
. repo_commit calls out to fast_export to write the current commit to
the fast-import stream in stdout.
. repo_diff is used by the fast_export module to write the changes
for a commit.
. repo_reset erases the exporter's state, so valgrind can be happy.
[rr: squelched compiler warnings]
[jn: removed support for maintaining state on-disk, though we may
want to add it back later]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This library provides thread-unsafe fgets()- and fread()-like
functions where the caller does not have to supply a buffer. It
maintains a couple of static buffers and provides an API to use
them.
[rr: allow input from files other than stdin]
[jn: with tests, documentation, and error handling improvements]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Intern strings so they can be compared by address and stored without
wasting space.
This library uses the macros in the obj_pool.h and trp.h to create a
memory pool for strings and expose an API for handling them.
[rr: added API docs]
[jn: with some API simplifications, new documentation and tests]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide macros to generate a type-specific treap implementation and
various functions to operate on it. It uses obj_pool.h to store memory
nodes in a treap. Previously committed nodes are never removed from
the pool; after any *_commit operation, it is assumed (correctly, in
the case of svn-fast-export) that someone else must care about them.
Treaps provide a memory-efficient binary search tree structure.
Insertion/deletion/search are about as about as fast in the average
case as red-black trees and the chances of worst-case behavior are
vanishingly small, thanks to (pseudo-)randomness. The bad worst-case
behavior is a small price to pay, given that treaps are much simpler
to implement.
>From http://www.canonware.com/download/trp/trp_hash/trp.h
[db: Altered to reference nodes by offset from a common base pointer]
[db: Bob Jenkins' hashing implementation dropped for Knuth's]
[db: Methods unnecessary for search and insert dropped]
[rr: Squelched compiler warnings]
[db: Added support for immutable treap nodes]
[jn: Reintroduced treap_nsearch(); with tests]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a memory pool library implemented using C macros. The
obj_pool_gen() macro creates a type-specific memory pool.
The memory pool library is distinguished from the existing specialized
allocators in alloc.c by using a contiguous block for all allocations.
This means that on one hand, long-lived pointers have to be written as
offsets, since the base address changes as the pool grows, but on the
other hand, the entire pool can be easily written to the file system.
This could allow the memory pool to persist between runs of an
application.
For the svn importer, such a facility is useful because each svn
revision can copy trees and files from any previous revision. The
relevant information for all revisions has to persist somehow to
support incremental runs.
[rr: minor cleanups]
[jn: added tests; removed file system backing for now]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the build system to build a separate library for the
upcoming subversion interop support.
The resulting vcs-svn/lib.a does not contain any code, nor is
it built during a normal build. This is just scaffolding for
later changes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/use-more-hardlinks-in-install:
Makefile: make hard/symbolic links for non-builtins too
Makefile: link builtins residing in bin directory to main git binary too
Some firewalls restrict HTTP connections based on the clients user agent. This
commit provides the user the ability to modify the user agent string via either
a new config option (http.useragent) or by an environment variable
(GIT_HTTP_USER_AGENT).
Relevant documentation is added to Documentation/config.txt.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.1-rc0~65^2~2 (http: init and cleanup separately from
http-walker, 2010-03-02) introduced a direct dependency from
http-fetch on the HTTP request library. Declare it.
Detected with "make CHECK_HEADER_DEPENDENCIES=1".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.2-rc0~56^2 and its parent (decode file:// and ssh://
URLs, 2010-05-23) introduced a new url library. Update the
Makefile with the relevant dependencies.
Detected with "make CHECK_HEADER_DEPENDENCIES=1".
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manpage was added in 1ed6f2c (Documentation: gitrevisions,
2010-07-05), but since it does not have a corresponding git command,
it needs an exception for check-docs.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To conserve space/improve file caching we try to make hard or symbolic links
from each builtin program to the main git executable rather than having
each be a complete duplicate copy of it. We weren't doing this for the
non-builtin programs though. So, just because we can, and because it's
easy, and for completeness sake, let's do it.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To conserve space/improve file caching we try to make hard or symbolic links
from each builtin program to the main git executable rather than having
each be a complete duplicate copy of it. We weren't doing this for the
builtin programs residing in the bin directory though. So, let's do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-makefile-fixes:
Makefile: work around ksh's failure to handle missing list argument to for loop
Makefile: remove some unnecessary curly braces
ksh does not like it when the list argument is missing in a 'for' loop.
This can happen when NO_CURL is set which causes REMOTE_CURL_ALIASES to be
unset. In this case, the 'for' loop in the Makefile is expanded to look
like this:
for p in ; do
and ksh complains like this:
/bin/ksh: syntax error at line 15 : `;' unexpected
The existing attempt to work around this issue, introduced by 70b89f87,
tried to protect the 'for' loop by first testing whether REMOTE_CURL_ALIASES
was empty, but this does not work since, as Johannes Sixt explains, "Before
the test for emptyness can happen, the complete statement must be parsed,
but ksh finds a syntax error in the statement and, therefore, cannot even
begin to execute the statement. (ksh doesn't follow POSIX in this regard,
where this would not be a syntax error.)".
Make's $(foreach) function could be used to avoid this shell glitch, but
since it has already caused a problem once before by generating a command
line that exceeded the maximum argument list length on IRIX, let's adopt
Bruce Stephens's suggestion for working around this issue in the same way
the OpenSSL folks have done it. This solution first assigns the contents
of the REMOTE_CURL_ALIASES make variable to a shell variable and then
supplies the shell variable as the list argument in the 'for' loop. This
satisfies ksh and has the expected behavior even if $(REMOTE_CURL_ALIASES)
is empty.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
* bc/portable:
Remove python 2.5'isms
Makefile: add PYTHON_PATH to GIT-BUILD-OPTIONS
t/aggregate-results: accomodate systems with small max argument list length
t/t7006: ignore return status of shell's unset builtin
t/t5150: remove space from sed script
git-request-pull.sh: remove -e switch to shell interpreter which breaks ksh
t/t5800: skip if python version is older than 2.5
* jn/gitweb-plackup:
git-instaweb: Add support for running gitweb via 'plackup'
git-instaweb: Wait for server to start before running web browser
git-instaweb: Remove pidfile after stopping web server
git-instaweb: Configure it to work with new gitweb structure
git-instaweb: Put httpd logs in a "$httpd_only" subdirectory
gitweb: Set default destination directory for installing gitweb in Makefile
gitweb: Move static files into seperate subdirectory
The PYTHON_PATH environment variable is not set when running test scripts
manually i.e. when not using 'make test'. Scripts which attempt to use
this variable will fail. So add it to the list of variables written to
the GIT-BUILD-OPTIONS file so that the test suite will import it when
running the test scripts.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise running individual tests from t/ directory may lack the definition
of $DIFF, $GIT_TEST_CMP and friends.
Noticed and initial patch provided by Thomas Rast, alternative solution
suggested by Brandon Casey, which this patch implements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
AIX doesn't ship with "less" by default, and their "more" is
more featureful than average, so the latter is a more
sensible choice. People who really want less can set the
compile-time option themselves, or users can set $PAGER.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Tor Arntsen <tor@spacetec.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AIX doesn't ship with "less" by default, and their "more" is
more featureful than average, so the latter is a more
sensible choice. People who really want less can set the
compile-time option themselves, or users can set $PAGER.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Tor Arntsen <tor@spacetec.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new configuration variable, "core.eol", that allows the user
to set which line endings to use for end-of-line-normalized files in the
working directory. It defaults to "native", which means CRLF on Windows
and LF everywhere else.
Note that "core.autocrlf" overrides core.eol. This means that
[core]
autocrlf = true
puts CRLFs in the working directory even if core.eol is set to "lf".
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge-one-file expects to run "-u" capable "diff", but using
$DIFF is not the right way to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add defaults for Tru64 Unix. Without this patch I cannot compile
git on Tru64 5.1.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HP-UX 10.20 has no pread definition, the inline keyword doesn't work,
and has no inet_ntop/inet_pton definitions.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no nanosecond field on HPUX, the inline keyword is
spelled "__inline", and there are no inet_ntop/inet_pton definitions
on HP-UX 11.00
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-instaweb in its current form (re)creates gitweb.cgi and
(some of) required static files in $GIT_DIR/gitweb/ directory.
Splitting gitweb would make it difficult for git-instaweb to
continue with this method.
Use the instaweb.gitwebdir config variable to point git-instaweb script
to a global directory which contains gitweb files as server root
and the httpd.conf along with server logs and pid go into
'$(GIT_DIR)/gitweb' directory.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently installing gitweb requires to give a target directory
(via 'gitwebdir' build variable). Giving it a default value
protects against user errors.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new subdirectory called 'static' in gitweb/, and move
all static files required by gitweb.cgi when running, which means
styles, images and Javascript code. This should make gitweb more
readable and easier to maintain.
Update t/gitweb-lib.sh to reflect this change.The install-gitweb
now also include moving of static files into 'static' subdirectory
in target directory: update Makefile, gitweb's INSTALL, README and
Makefile accordingly.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio originally added this in f6276fe159 for use in `unshift @INC,
'@@INSTLIBDIR@@'' in git-fmt-merge-msg.perl. That program was since
then rewritten in C in 00449f992b. And since 6fcca938b0 all Perl
programs use `use lib' to set their @INC path.
There's been no @@INSTLIBDIR@@ in any Perl script to replace since
then. So there's no reason to keep it around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although configure takes care of most of this, set some default values
for Solaris 2.6 (aka SunOS-5.6) to ensure git compiles even when
configure is not used to build it.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compiler support for inline is sometimes buggy, and occasionally
missing entirely. This patch adds a test for inline support, and
redefines the keyword with the preprocessor if necessary at compile
time.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms do not have a socklen_t type declaration.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default the testsuite calls 'diff -u' whenever a file comparison is
called for. Unfortunately that throws a "diff: unknown option '-u'"
error for most non-GNU diffs.
This patch sets GIT_TEST_CMP to 'cmp' on all the architectures where
that happens. The previous version of this patch forgot to export
GIT_TEST_CMP from t/Makefile, which is why 'make test' continued to
fail most tests on most architectures - test-lib.sh was falling back
on its default of `diff -u' for GIT_TEST_CMP. This version of this
patch shows a vast improvement in testsuite results where either GNU
diff is in the path at configure time, or where Makefile knows that
GIT_TEST_CMP=cmp is required.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the flags used with the first diff found in PATH cause the
vendor diff to choke.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, systems that provide stubs for pthread functions
in libc, but which still require libpthread for full the pthread
implementation are not detected correctly.
Also, some systems require -pthread in CFLAGS for each compilation
unit for a successful link of an mt binary, which is also addressed by
this patch.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch there is no straight forward way to pass additional
CPPFLAGS at configure-time. At TWW, everything non-vendor package is
installed to its own subdirectory, so we need the following to show
the preprocessor where the headers for the libraries we will link
later can be found:
$SHELL ./configure \
CPPFLAGS="-I${SB_VAR_CURL_INC}\
-I${SB_VAR_LIBEXPAT_INC}\
-I${SB_VAR_LIBZ_INC}\
${CPPFLAGS+ $CPPFLAGS}" <<...>>
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Makefile: reenable install with NO_CURL
completion: --set-upstream option for git-branch
get_cwd_relative(): do not misinterpret suffix as subdirectory
Setting NO_CURL leaves some variables like REMOTE_CURL_ALIASES
empty, which creates no fun when for-looping over
$(REMOTE_CURL_ALIASES) unconditionally. Make it conditional.
Reported-by: Paul Walker <PWalker752@aol.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_url function and url percent-decoding functions were
static, but are generally useful. Let's make them available
to other parts of the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sr/remote-helper-export:
t5800: testgit helper requires Python support
Makefile: Simplify handling of python scripts
remote-helpers: add tests for testgit helper
remote-helpers: add testgit helper
remote-helpers: add support for an export command
remote-helpers: allow requesing the path to the .git directory
fast-import: always create marks_file directories
clone: also configure url for bare clones
clone: pass the remote name to remote_get
Conflicts:
Makefile
Starting with MinGW 3.14, released end of 2007, a working snprintf
is available. This means we do not need our own replacement that works
around the broken implementation in Microsoft's C runtime.
People who build git in an old MinGW environment are expected to set
SNPRINTF_RETURNS_BOGUS in their config.mak. msysgit is sufficiently
recent, of course.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/cached-textconv:
diff: avoid useless filespec population
diff: cache textconv output
textconv: refactor calls to run_textconv
introduce notes-cache interface
make commit_tree a library function
This way, if you have “COMPUTE_HEADER_DEPENDENCIES = YesPlease” in your
config.mak, you can still “make CHECK_HEADER_DEPENDENCIES=Yes” to check
the makefile after a successful build.
This change does not affect the result of the command
“make CHECK_HEADER_DEPENDENCIES=Yes COMPUTE_HEADER_DEPENDENCIES=Yes”.
That will still die with an error message:
cannot compute header dependencies outside a normal build
The message is appropriate because still true.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not expect to find http-related dependency fragments after a build
with HTTP support disabled.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular the gitweb/GITWEB-BUILD-OPTIONS file was not being
removed by the main Makefile. However, the gitweb/Makefile has a
'clean' target that correctly removes all the build products.
In order to fix the problem, rather than duplicate the clean-up
instructions, we change the main Makefile so that it delegates
the clean-up actions to the gitweb Makefile.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Installing gitweb is now as easy as
# make gitwebdir=/var/www/cgi-bin gitweb-install ;# as root
The gitweb/INSTALL file was updated accordingly, to make use of this
new target.
Fix shell quoting, i.e. setting bindir_SQ etc., in gitweb/Makefile.
Those variables were not used previously.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default executable path list used by exec_cmd.c is hard-coded to
be "/usr/local/bin:/usr/bin:/bin". Use an appropriate value for the
system from <paths.h> when available.
Add HAVE_PATHS_H make variables and enable it on Linux, FreeBSD,
NetBSD, OpenBSD and GNU where it is known to exist for now. Somebody
else may want to do an autoconf support later.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mr/gitweb-jsmin:
gitweb: update INSTALL to use shorter make target
gitweb: add documentation to INSTALL regarding gitweb.js
instaweb: add minification awareness
Gitweb: add autoconfigure support for minifiers
Gitweb: add support for minifying gitweb.css
Gitweb: add ignore and clean rules for minified files
The sed script intended to add a standard opening to python scripts
was non-compatible and overly complex. Simplifying it down to a set
of one-liners removes the compatibility issues of newlines. Moving
the environment alterations from the Makefile to the python scripts
makes also makes the scripts easier to run in-place.
Specifically, the new sed script:
- Alters the shebang line to use the configured Python.
- Alters any os.getenv("GITPYTHONLIB") calls to use @@INSTLIBDIR@@ as the
default. This will replace any existing default or add a default if
none is provided.
- Replaces the @@INSTLIBDIR@@ placeholder with the directory git installs
its python libraries to.
The last two steps could be combined into a single step, but is left
separate in case someone has another need for @@INSTLIBDIR@@ in their
script.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey reports:
Subject: Re: [PATCH] Link against libiconv on IRIX
Date: Mon, 05 Apr 2010 11:45:32 -0500
Message-Id: <1UypQMCHLT57SnjSQIM66RTkLalsvavG8xXoQJv4rEQ@cipher.nrlssc.navy.mil>
This breaks compilation on IRIX 6.5.29m for me since there
is no separate libiconv.so.
What version of IRIX are you using?
On my system, even the iconv utility doesn't link against
a libiconv shared object. It seems the iconv functionality is in libc.
# ldd /usr/bin/iconv
libc.so.1 => /usr/lib32/libc.so.1
Could it be that you are using a third party iconv library?
I've experienced this on another system and the problem was related
to curl. In that case, curl was linked against an external iconv and
not the native library, so if I tried to build with curl support, I had
to also build against the external iconv library.
While we wait for an improved solution, revert the regression caused by
2170422790.
Tweak the condition that detects old Cygwin versions to not include
versions such as 1.8, 1.11, and 2.1.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch will cause git-instaweb to use the minified version of gitweb
support files (e.g. CSS and JavaScript) if they were generated.
Without minification awareness, generating the minified version of
gitweb's support files will generate a broken instaweb script since the
copy of gitweb.cgi will look for gitweb.min.* which will not exist.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow users to set a JavaScript/CSS minifier when/if they run
the autoconfigure script while building git.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build system added support minifying gitweb.js through a
JavaScript minifier, but most minifiers come with support for
minifying CSS files as well, so we should use it if we can.
This patch will add the same facilities to gitweb.css that
gitweb.js has for minification. That does not mean that they
will use the same minifier though, as it is not safe to assume
that all JavaScript minifiers will also minify CSS files.
This patch also adds the GITWEB_PROGRAMS variable to the Makefile
to keep a list of potential gitweb dependencies separate from
OTHER_PROGRAMS when we need to know just the gitweb dependencies.
Though the bandwidth savings will not be as dramatic as with
the JavaScript minifier, every byte saved is important.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notes provide a fast lookup mechanism for data keyed by
sha1. This is ideal for caching certain operations, like
textconv filters.
This patch builds some infrastructure to make it simpler to
use notes trees as caches. In particular, caches:
1. don't have arbitrary commit messages. They store a
cache validity string in the commit, and clear the tree
when the cache validity string changes.
2. don't keep any commit history. The accumulated history
of a a cache is just useless cruft.
3. use a looser form of locking for ref updates. If two
processes try to write to the cache simultaneously, it
is OK if one overwrites the other, losing some changes.
It's just a cache, so we will just end up with an extra
miss.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that Cygwin 1.7.x has enabled lots of new features, and Cygwin 1.5
is no longer actively supported by the Cygwin mailing lists, we might
as well update the defaults to cater to those new features.
NO_TRUSTABLE_FILEMODE is only necessary on FAT drives; the Cygwin
community recommends NTFS drives, but there is still too much use
for FAT to switch the default. Likewise, UNRELIABLE_FSTAT is probably
file-system specific, but worth keeping unchanged.
This commit does not change the default for NO_MMAP, although definitive
proof of whether this option is necessary is lacking.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the remote helper infrastructure is only used by the curl
helper, which does not give a good impression of how remote helpers
can be used to interact with foreign repositories. Since implementing
such a helper is non-trivial it would be good to have at least one
easy-to-follow example demonstrating how to implement a helper that
interacts with a foreign vcs using fast-import/fast-export.
The testgit helper can be used to interact with remote git
repositories by prefixing the url with "testgit::".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On IRIX, "-liconv" must be added to the linker command line in order to
get iconv(3) support; set the according Makefile variable appropriately.
Signed-off-by: Holger Weiß <holger@zedat.fu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"has_key" is a deprecated dictionary method in Python 2.6+.
Simplify the sys.path manipulation for installed scripts by
passing a default value to os.getenv() that takes a default
value to be used when the environment variable is missing.
SCRIPT_PYTHON is currently empty but this future-proofs us.
It also fixes things for users who maintain local git forks
with their own SCRIPT_PYTHON additions.
Old code replaced the first element of sys.path[] which is
typically '' (i.e. import library files relative to the script).
It is safer to prepend the extra library path instead.
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On FreeBSD, Python does not ship as part of the base system but is available
via the ports system, which install the binary in /usr/local/bin.
Signed-off-by: R. Tyler Ballance <tyler@monkeypox.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.0.3
fetch: Fix minor memory leak
fetch: Future-proof initialization of a refspec on stack
fetch: Check for a "^{}" suffix with suffixcmp()
daemon: parse_host_and_port SIGSEGV if port is specified
Makefile: Fix CDPATH problem
pull: replace unnecessary sed invocation
The hook script templates were hard coded to use /bin/sh and perl.
This patch ensures that they use the same tools specified for the rest
of the suite.
The impetus for the change was noticing that, as shipped, some of the
hooks used shell constructs that wouldn't work under Solaris' /bin/sh
(eg: $(cmd...) substitutions).
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GNU make’s target-specific variables facility has one weird facet: any
variables set for a given target apply to all of its dependencies,
too. For example, when running “make exec_cmd.o”, since exec_cmd.o
depends on GIT-CFLAGS, the variable assignment in
exec_cmd.s exec_cmd.o: ALL_CFLAGS += \
'-DGIT_EXEC_PATH="$(gitexecdir_SQ)"' \
'-DBINDIR="$(bindir_relative_SQ)"' \
'-DPREFIX="$(prefix_SQ)"'
applies when refreshing GIT-CFLAGS, and the extra options get included
in the tracked compiler flags. If an object file like this is the
first target built, GIT-CFLAGS will appear to be out of date,
resulting in useless rebuilds and the dreaded “new build flags or
prefix” message.
This does not happen with every build because GIT-CFLAGS is only
refreshed once in a given “make” run, and usually the first target
does not set any variables. When this problem does rear its head, it
is very annoying.
So put target-specific flags in a separate EXTRA_CPPFLAGS variable
that is not included in $(TRACK_CFLAGS).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If CDPATH is set, "cd" prints its destination to stdout, causing
the common (cd a && tar cf - .) | (cd b && tar xf -) idiom to fail.
For example:
make -C templates DESTDIR='' install
make[1]: Entering directory `/users/e477610/exptool/src/git-1.7.0.2/templates'
install -d -m 755 '/home/e477610/exptool/share/git-core/templates'
(cd blt && gtar cf - .) | \
(cd '/home/e477610/exptool/share/git-core/templates' && umask 022 && gtar xof -)
gtar: This does not look like a tar archive
Most git scripts already protect against use of CDPATH through
git-sh-setup, but the Makefile doesn’t.
Reported-by: Michael Cox <mhcox@bluezoosoftware.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/notes: (33 commits)
Documentation: fix a few typos in git-notes.txt
notes: fix malformed tree entry
builtin-notes: Minor (mostly parse_options-related) fixes
builtin-notes: Add "copy" subcommand for copying notes between objects
builtin-notes: Misc. refactoring of argc and exit value handling
builtin-notes: Add -c/-C options for reusing notes
builtin-notes: Refactor handling of -F option to allow combining -m and -F
builtin-notes: Deprecate the -m/-F options for "git notes edit"
builtin-notes: Add "append" subcommand for appending to note objects
builtin-notes: Add "add" subcommand for adding notes to objects
builtin-notes: Add --message/--file aliases for -m/-F options
builtin-notes: Add "list" subcommand for listing note objects
Documentation: Generalize git-notes docs to 'objects' instead of 'commits'
builtin-notes: Add "prune" subcommand for removing notes for missing objects
Notes API: prune_notes(): Prune notes that belong to non-existing objects
t3305: Verify that removing notes triggers automatic fanout consolidation
builtin-notes: Add "remove" subcommand for removing existing notes
Teach builtin-notes to remove empty notes
Teach notes code to properly preserve non-notes in the notes tree
t3305: Verify that adding many notes with git-notes triggers increased fanout
...
Conflicts:
Makefile
When we added bunch of git-remote-* helper backends, we should have
done this to squelch complaints that they do not have their own
manual pages. Also the entry for git-remote-helpers was not
properly marked as a non-command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
The definition of TEST_OBJS in commit daa99a91 (Makefile: make sure
test helpers are rebuilt when headers change, 2010-01-26) moved a use
of $X to before the platform-specific section where it gets defined.
There are at least two ways to fix that:
- Change the definition of TEST_OBJS to use the = delayed
evaluation operator. This way, one need not worry about $(X)
needing to be defined before TEST_OBJS is set.
- Move the definition of TEST_OBJS to below the definition of $X.
Carry out the second. The later site of definition makes the code more
readable, since now a reader only has to look down one line to see what
TEST_OBJS is meant to be used for.
Oddly enough, with or without this change the behavior of the Makefile
is the same. Since TEST_PROGRAMS is defined with delayed evaluation,
the value of
TEST_OBJS := $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS))
is independent of the value of $X when it is evaluated: the $X in the
pattern and the $X in $(TEST_PROGRAMS) will simply always cancel out.
Make sure $X has the expected expansion anyway to make the code and
the reader’s sanity more robust in the face of future changes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function used to be only a compatibility function, but we're
going to extend it and actually use it, so make it part of Git.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin-ification includes some minor behavioural changes to the
command-line interface: It is no longer allowed to mix the -m and -F
arguments, and it is not allowed to use multiple -F options.
As part of the builtin-ification, we add the commit_notes() function
to the builtin API. This function (together with the notes.h API) can
be easily used from other builtins to manipulate the notes tree.
Also includes needed changes to t3301.
This patch has been improved by the following contributions:
- Stephen Boyd: Use die() instead of fprintf(stderr, ...) followed by exit(1)
Cc: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jh/gitweb-caching' (early part):
gitweb: Add optional extra parameter to die_error, for extended explanation
gitweb: add a "string" variant of print_sort_th
gitweb: add a "string" variant of print_local_time
gitweb: Check that $site_header etc. are defined before using them
gitweb: Makefile improvements
gitweb: Load checking
gitweb: Make running t9501 test with '--debug' reliable and usable
Even if COMPUTE_HEADER_DEPENDENCIES is not set, some .o.d files
might be lying around from previous builds when it was. This
is especially likely because using the CHECK_HEADER_DEPENDENCIES
feature requires building sometimes with COMPUTE... on and
sometimes with it off. At the end of such an exercise, to get
a blank slate, the user ought to be able to just run 'make clean'.
Make it so.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building with COMPUTE_HEADER_DEPENDENCIES on, save
dependency information to .depend/ instead of deps/ so it does
not show up in ‘ls’ output. Otherwise, the extra directories can
be distracting.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some scripts are expected to be sourced instead of executed on their own.
Avoid some confusion by not marking them executable.
The executable bit was confusing the valgrind support of our test scripts,
which assumed that any executable without a #!-line should be intercepted
and run through valgrind. So during valgrind-enabled tests, any script
sourcing these files actually sourced the valgrind interception script
instead.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the first piece of threaded code was introduced in commit 8ecce684, it
came with its own THREADED_DELTA_SEARCH Makefile option. Since this time,
more threaded code has come into the codebase and a NO_PTHREADS option has
also been added. Get rid of the original option as the newer, more generic
option covers everything we need.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the main Makefile so you can simply run
make gitweb
which in turn calls gitweb/Makefile. This means that in order to
generate gitweb, you can simply run 'make' from gitweb subdirectory:
cd gitweb
make
Targets gitweb/gitweb.cgi and (dependent on JSMIN being defined)
gitweb/gitweb.min.js in main Makefile are preserved for backward
compatibility.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a target to use the gcc-generated makefile snippets for
dependencies on header files to check the hard-coded dependencies.
With this patch applied, if any dependencies are missing, then
make clean
make COMPUTE_HEADER_DEPENDENCIES=YesPlease
make CHECK_HEADER_DEPENDENCIES=YesPlease
will produce an error message like the following:
CHECK fast-import.o
missing dependencies: exec_cmd.h
make: *** [fast-import.o] Error 1
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Because of new commands like git-remote-http, the OBJECTS list
contains fictitious objects such as remote-http.o. Thus any
out-of-tree rules that require all $(OBJECTS) to be buildable
are broken. Add a list of real program objects to avoid this
problem.
To avoid duplication of effort, calculate the command list in
the PROGRAMS variable using the expansion of PROGRAM_OBJS.
This calculation occurs at the time $(PROGRAMS) is expanded,
so later additions to PROGRAM_OBJS will be reflected in it,
provided they occur before the build rules begin on line 1489.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Use the gcc -MMD -MP -MF options to generate dependency rules as
a byproduct when building .o files if the
COMPUTE_HEADER_DEPENDENCIES variable is defined. That variable
is left undefined by default for now.
As each object file is built, write a makefile fragment
containing its dependencies in the deps/ subdirectory of its
containing directory. The deps/ directories should be generated
if they are missing at the start of each build. So let each
object file depend on $(missing_dep_dirs), which lists only the
directories of this kind that are missing to avoid needlessly
regenerating files when the directories' timestamps change.
gcc learned the -MMD -MP -MF options in version 3.0, so most gcc
users should have them by now.
The dependencies this option computes are more specific than the
rough estimates hard-coded in the Makefile, greatly speeding up
rebuilds when only a little-used header file has changed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Set the OBJECTS variable to a comprehensive list of all object
file targets. To make sure it is truly comprehensive, restrict
the scope of the %.o pattern rule to only generate objects in
this list.
Attempts to build other object files will fail loudly:
$ touch foo.c
$ make foo.o
make: *** No rule to make target `foo.o'. Stop.
providing a reminder to add the new object to the OBJECTS list.
The new variable is otherwise unused. The intent is for later
patches to take advantage of it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
The git makefile never uses any default implicit rules.
Unfortunately, if a prerequisite for one of the intended rules is
missing, a default rule can be used in its place:
$ make var.s
CC var.s
$ rm var.c
$ make var.o
as -o var.o var.s
Avoiding the default rules avoids this hard-to-debug behavior.
It also should speed things up a little in the normal case.
Future patches may restrict the scope of the %.o: %.c pattern.
This patch would then ensure that for targets not listed, we do
not fall back to the default rule.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Put rules listing dependencies of compiled objects (.o files) on
header files (.h files) in one place, to make them easier to
compare and modify all at once.
Add a GIT_OBJS variable listing objects that depend on LIB_H,
for similar reasons.
No change in build-time behavior intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
* 'master' of git://repo.or.cz/alt-git: (384 commits)
am: fix patch format detection for Thunderbird "Save As" emails
t0022: replace non-portable literal CR
tests: consolidate CR removal/addition functions
commit-tree: remove unused #define
t5541-http-push: make grep expression check for one line only
rebase: replace antiquated sed invocation
Add test-run-command to .gitignore
git_connect: use use_shell instead of explicit "sh", "-c"
gitweb.js: Workaround for IE8 bug
Make test numbers unique
Windows: Remove dependency on pthreadGC2.dll
Documentation: move away misplaced 'push --upstream' description
Documentation: add missing :: in config.txt
pull: re-fix command line generation
Documentation: merge: use MERGE_HEAD to refer to the remote branch
Documentation: simplify How Merge Works
Documentation: merge: add a section about fast-forward
Documentation: emphasize when git merge terminates early
Documentation: merge: add an overview
Documentation: merge: move merge strategy list to end
...
Conflicts:
Makefile
http-walker.o depends on http.h twice: once in the rule listing
files that use http.h, and again in the rule explaining how to
build it. Messy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
A list of the few translation units using this header is
half-populated already. Including the dependency on this header
twice (once explicitly, once through LIB_H) makes it difficult to
figure out where future headers should be added to the Makefile.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
It is not worth the bother to maintain an up-to-date list of
which headers each test helper uses, so depend on $(LIB_H) to
catch them all.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
LIB_H is missing exec_cmd.h and color.h. cache.h includes
SHA1_HEADER, and thus so does almost everything else, so add that
to LIB_H, too. xdiff-interface.h is not included by any header
files, but so many source files use xdiff that it is simplest to
include it in LIB_H, too.
xdiff-interface.o uses the xdiff library heavily; let it depend
on all xdiff headers to avoid needing to keep track of which
headers it uses.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Commit 44626dc7 (MSVC: Windows-native implementation for subset
of threads API, 2010-01-15) introduces builtin replacement of
pthreadGC2.dll functionality, thus we can completely drop
dependency on this dll.
Signed-off-by: Michael Lukashov <michael.lukashov@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This required some fairly trivial packfile function 'const' cleanup,
since the builtin commands get a const char *argv[] array.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the documentation says, this is primarily for debugging, and
in the longer term we should rename it to test-show-index or something.
In the meantime, just avoid xmalloc (which slurps in the rest of git), and
separating out the trivial hex functions into "hex.o".
This results in
[torvalds@nehalem git]$ size git-show-index
text data bss dec hex filename
222818 2276 112688 337782 52776 git-show-index (before)
5696 624 1264 7584 1da0 git-show-index (after)
which is a whole lot better.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/cache-unmerge:
rerere forget path: forget recorded resolution
rerere: refactor rerere logic to make it independent from I/O
rerere: remove silly 1024-byte line limit
resolve-undo: teach "update-index --unresolve" to use resolve-undo info
resolve-undo: "checkout -m path" uses resolve-undo information
resolve-undo: allow plumbing to clear the information
resolve-undo: basic tests
resolve-undo: record resolved conflicts in a new index extension section
builtin-merge.c: use standard active_cache macros
Conflicts:
builtin-ls-files.c
builtin-merge.c
builtin-rerere.c
* js/exec-error-report:
Improve error message when a transport helper was not found
start_command: detect execvp failures early
run-command: move wait_or_whine earlier
start_command: report child process setup errors to the parent's stderr
Conflicts:
Makefile
* jc/grep-lookahead:
grep --no-index: allow use of "git grep" outside a git repository
grep: prepare to run outside of a work tree
grep: rip out pessimization to use fixmatch()
grep: rip out support for external grep
grep: optimize built-in grep by skipping lines that do not hit
Conflicts:
builtin-grep.c
t/t7002-grep.sh
Previously, these variables were set before there was a chance to set
NO_CURL.
This made a difference only during 'make install', because by installing
$(REMOTE_CURL_ALIASES), the rule tries to access $(REMOTE_CURL_PRIMARY),
which was never installed. On Windows, this fails; on Unix, stale symbolic
links are created.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/windows:
Do not use date.c:tm_to_time_t() from compat/mingw.c
MSVC: Windows-native implementation for subset of Pthreads API
MSVC: Fix an "incompatible pointer types" compiler warning
Windows: avoid the "dup dance" when spawning a child process
Windows: simplify the pipe(2) implementation
Windows: boost startup by avoiding a static dependency on shell32.dll
Windows: disable Python
* jn/makefile:
Makefile: consolidate .FORCE-* targets
Makefile: learn to generate listings for targets requiring special flags
Makefile: use target-specific variable to pass flags to cc
Makefile: regenerate assembler listings when asked
This patch implements native to Windows subset of pthreads API used by Git.
It allows to remove Pthreads for Win32 dependency for MSVC, msysgit and
Cygwin.
[J6t: If the MinGW build was built as part of the msysgit build
environment, then threading was already enabled because the
pthreads-win32 package is available in msysgit. With this patch, we can now
enable threaded code unconditionally.]
Signed-off-by: Andrzej K. Haczewski <ahaczewski@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python is not commonly installed on Windows machines, so
we should disable it there by default.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* il/vcs-helper:
Reset possible helper before reusing remote structure
Remove special casing of http, https and ftp
Support remote archive from all smart transports
Support remote helpers implementing smart transports
Support taking over transports
Refactor git transport options parsing
Pass unknown protocols to external protocol handlers
Support mandatory capabilities
Add remote helper debug mode
Conflicts:
Documentation/git-remote-helpers.txt
transport-helper.c
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
