Now that the sequencer learned to process a "normal" interactive rebase,
we use it. The original shell script is still used for "non-normal"
interactive rebases, i.e. when --root or --preserve-merges was passed.
Please note that the --root option (via the $squash_onto variable) needs
special handling only for the very first command, hence it is still okay
to use the helper upon continue/skip.
Also please note that the --no-ff setting is volatile, i.e. when the
interactive rebase is interrupted at any stage, there is no record of
it. Therefore, we have to pass it from the shell script to the
rebase--helper.
Note: the test t3404 had to be adjusted because the the error messages
produced by the sequencer comply with our current convention to start with
a lower-case letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than abusing a strbuf to come up with an environment block,
let's just use the argv_array structure which serves the same
purpose much better.
While at it, rename the function to reflect the fact that it does
not really care exactly what environment variables are defined in
said file.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" did not work well with core.commentchar
configuration variable for two reasons, both of which have been
fixed.
* js/rebase-i-commentchar-fix:
rebase -i: handle core.commentChar=auto
stripspace: respect repository config
rebase -i: highlight problems with core.commentchar
When 84c9dc2 (commit: allow core.commentChar=auto for character auto
selection, 2014-05-17) extended the core.commentChar functionality to
allow for the value 'auto', it forgot that rebase -i was already taught to
handle core.commentChar, and in turn forgot to let rebase -i handle that
new value gracefully.
Reported by Taufiq Hoven.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase does not currently play well with
core.commentchar. Let's add some tests to highlight those problems
that will be fixed in the remainder of the series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we found bad instruction lines in the instruction sheet
of interactive rebase, we give the user advice on how to
fix it. However, we don't tell the user what to do afterwards.
Give the user advice to run 'git rebase --continue' after
the fix.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned test greps the output of exit_with_patch() in
git-rebase--interactive.sh script.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests that specifically target "git rebase -i" have been
added.
* js/rebase-i-tests:
rebase -i: we allow extra spaces after fixup!/squash!
rebase -i: demonstrate a bug with --autosquash
t3404: add a test for the --gpg-sign option
For the upcoming rebase--helper work (which will accelerate the
interactive rebase noticably), it is important to verify that the
--gpg-sign option is handled properly.
Please note that this patch does this on the cheap, by verifying that
the expected option is printed in the message of the 'edit' operation.
We really should test that the interactive rebase signs the commits
properly, iff GPG is available. This test is left for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use functions test_i18ncmp and test_i18ngrep to successfully pass tests
running under GETTEXT_POISON.
The output strings compared to in these test were marked for translation
in ed47fdf ("i18n: unpack-trees: mark strings for translation",
2016-04-09) and later improved in 2e3926b ("i18n: unpack-trees: avoid
substituting only a verb in sentences", 2016-05-12).
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use pipe to send gettext output to git stripspace instead of the
original method of using shell here-document, because command
substitution '$(...)' would not take place inside the here-documents.
The exception is the case of the last here-document redirecting to cat,
in which commands substitution works and, thus, is preserved in this
commit.
t3404: adapt test to the strings newly marked for translation
Test t3404-rebase-interactive.sh would fail under GETTEXT_POISON unless
using test_i18ngrep.
Add eval_ngettext fallback functions to be called when running, for
instance, under GETTEXT_POISON. Otherwise, tests would fail under
GETTEXT_POISON, or other build that doesn't support the GNU gettext,
because that function could not be found.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses hardcoded #!/bin/sh to create a pre-commit hook
script. Because the generated script uses $(command substitution),
which is not supported by /bin/sh on some platforms (e.g. Solaris),
the resulting pre-commit always fails.
Which is not noticeable as the test that uses the hook is about
checking the behaviour of the command when the hook fails ;-), but
nevertheless it is not testing what we wanted to test.
Use write_script so that the resulting script is run under the same
shell our scripted Porcelain commands are run, which must support
the necessary $(construct).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the later steps of preparing a patch series I do not want to
edit or reorder the patches any more, but just make sure the
test suite passes after each patch and also to fix breakage
right there if some of the steps fail. I could run
EDITOR=true git rebase -i <anchor> -x "make test"
but it would be simpler if it can be spelled like so:
git rebase <anchor> -x "make test"
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user explicitly specified a merge strategy or strategy
options, continue to use that strategy/option after
"rebase --continue". Add a test of the corrected behavior.
If --merge is specified or implied by -s or -X, then "strategy and
"strategy_opts" are set to values from which "strategy_args" can be
derived; otherwise they are set to empty strings. Either way,
their values are propagated from one step of an interactive rebase
to the next via state files.
"do_merge", on the other hand, is *not* propagated to later steps of
an interactive rebase. Therefore, making the initialization of
"strategy_args" conditional on "do_merge" being set prevents later
steps of an interactive rebase from setting it correctly.
Luckily, we don't need the "do_merge" guard at all. If the rebase
was started without --merge, then "strategy" and "strategy_opts"
are both the empty string, which results in "strategy_args" also
being set to the empty string, which is just what we want in that
situation. So remove the "do_merge" guard and derive
"strategy_args" from "strategy" and "strategy_opts" every time.
Reported-by: Diogo de Campos <campos@esss.com.br>
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As CodingGuidelines says, some versions of bash errors out when
$variable substitution is used as the target for redirection without
being quoted (even though POSIX may not require such a quote).
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
Editors on Windows can and do save text files with CRLF line
endings, which is the convention on the platform. We are seeing
reports that the "read" command in a port of bash to the environment
however does not strip the CRLF at the end, not adjusting for the
same convention on the platform.
This breaks the recently added sanity checks for the insn sheet fed
to "rebase -i"; instead of an empty line (hence nothing in $command),
the script was getting a lone CR in there.
Special case a lone CR and treat it the same way as an empty line to
work this around.
This patch (also) passes the test with Git for Windows, where the
issue was seen first.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that assume how reflogs are represented on the filesystem too
much have been corrected.
* dt/reflog-tests:
tests: remove some direct access to .git/logs
t/t7509: remove unnecessary manipulation of reflog
Add "drop commit-object-name subject" command as another way to
skip replaying of a commit in "rebase -i", and then punish those
who do not use it (and instead just remove the lines) by throwing
a warning.
* gr/rebase-i-drop-warn:
git rebase -i: add static check for commands and SHA-1
git rebase -i: warn about removed commits
git-rebase -i: add command "drop" to remove a commit
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
Check before the start of the rebasing if the commands exists, and for
the commands expecting a SHA-1, check if the SHA-1 is present and
corresponds to a commit. In case of error, print the error, stop git
rebase and prompt the user to fix with 'git rebase --edit-todo' or to
abort.
This allows to avoid doing half of a rebase before finding an error
and giving back what's left of the todo list to the user and prompt
him to fix when it might be too late for him to do so (he might have
to abort and restart the rebase).
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if commits were removed (i.e. a line was deleted) and print
warnings or stop git rebase depending on the value of the
configuration variable rebase.missingCommitsCheck.
This patch gives the user the possibility to avoid silent loss of
information (losing a commit through deleting the line in this case)
if he wants.
Add the configuration variable rebase.missingCommitsCheck.
- When unset or set to "ignore", no checking is done.
- When set to "warn", the commits are checked, warnings are
displayed but git rebase still proceeds.
- When set to "error", the commits are checked, warnings are
displayed and the rebase is stopped.
(The user can then use 'git rebase --edit-todo' and
'git rebase --continue', or 'git rebase --abort')
rebase.missingCommitsCheck defaults to "ignore".
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of removing a line to remove the commit, you can use the
command "drop" (just like "pick" or "edit"). It has the same effect as
deleting the line (removing the commit) except that you keep a visual
trace of your actions, allowing a better control and reducing the
possibility of removing a commit by mistake.
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When skipping commits whose changes were already applied via `git rebase
--continue`, we need to clean up said file explicitly.
The same is not true for `git rebase --skip` because that will execute
`git reset --hard` as part of the "skip" handling in git-rebase.sh, even
before git-rebase--interactive.sh is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rev-list's --cherry option does not detect that a patch has already
been applied upstream, an interactive rebase would offer to reapply it and
consequently stop at that patch with a failure, mentioning that the diff
is empty.
Traditionally, a `git rebase --continue` simply skips the commit in such a
situation.
However, as pointed out by Gábor Szeder, this leaves a CHERRY_PICK_HEAD
behind, making the Git prompt believe that a cherry pick is still going
on. This commit adds a test case demonstrating this bug.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
When rebase--interactive processes a task, it removes the item from
the todo list and appends it to another list of executed tasks. If a
pick (this includes squash and fixup) fails before the index has
recorded the changes, take the corresponding item and put it on the todo
list again. Otherwise, the changes introduced by the scheduled commit
would be lost.
That kind of decision is possible since the cherry-pick command
signals why it failed to apply the changes of the given commit. Either
the changes are recorded in the index using a conflict (return value 1)
and rebase does not continue until they are resolved or the changes
are not recorded in the index (return value neither 0 nor 1) and
rebase has to try again with the same task.
Add a test cases for regression testing to the "rebase-interactive"
test suite.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
but in a way that probably does not effect the outcome of
the test. Most of these are of the form:
some_cmd >actual
test_cmp expect actual
The main point of the test is to verify the output, and a
failure in some_cmd would probably be noticed by bogus
output. But it is good for the tests to also confirm that
"some_cmd" does not die unexpectedly after producing its
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10)
taught rebase-interactive to compute an item count with 'wc -l' and
display it in the instruction list comments:
# Rebase 46640c6..5568fd5 onto 46640c6 (4 TODO item(s))
On Mac OS X, however, it renders as:
# Rebase 46640c6..5568fd5 onto 46640c6 ( 4 TODO item(s))
since 'wc -l' indents its output with leading spaces. Fix this.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier days, the abbreviated commit object name shown to the end
users were generated with hardcoded --abbrev=7; 56895038 (rebase
-i: respect core.abbrev, 2013-09-28) tried to make it honor the user
specified core.abbrev, but it missed the very initial invocation of
the editor.
These days, we try to use the full 40-hex object names internally to
avoid ambiguity that can arise after rebase starts running. Newly
created objects during the rebase may share the same prefix with
existing commits listed in the insn sheet. These object names are
shortened just before invoking the sequence editor to present the
insn sheet to the end user, and then expanded back to full object
names when the editor returns.
But the code still used the shortened names when preparing the insn
sheet for the very first time, resulting "7 hexdigits or more"
output to the user. Change the code to use full 40-hex commit
object names from the very beginning to make things more uniform.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's some special code in rebase -i to deal
with --keep-empty.
Add test for this combination.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit object names in the insn sheet that was prepared at the
beginning of "rebase -i" session can become ambiguous as the
rebasing progresses and the repository gains more commits. Make
sure the internal record is kept with full 40-hex object names.
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and
then performs its operations upon those shortened values. This can lead
to an abort if the SHA-1 of a reworded or edited commit is no longer
unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the
todo list has the same abbreviated value.
For example:
edit f00dfad first
pick badbeef second
If, after editing, the new SHA-1 of "first" also has prefix badbeef,
then the subsequent 'pick badbeef second' will fail since badbeef is no
longer a unique SHA-1 abbreviation:
error: short SHA1 badbeef is ambiguous.
fatal: Needed a single revision
Invalid commit name: badbeef
Fix this problem by expanding the SHA-1's in the todo list before
performing the operations.
[es: also collapse & expand SHA-1's for --edit-todo; respect
core.commentchar in transform_todo_ids(); compose commit message]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and
then performs its operations upon those shortened values. This can lead
to an abort if the SHA-1 of a reworded or edited commit is no longer
unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the
todo list has the same abbreviated value.
For example:
edit f00dfad first
pick badbeef second
If, after editing, the new SHA-1 of "first" also has prefix badbeef,
then the subsequent 'pick badbeef second' will fail since badbeef is no
longer a unique SHA-1 abbreviation:
error: short SHA1 badbeef is ambiguous.
fatal: Needed a single revision
Invalid commit name: badbeef
Demonstrate this problem with a couple of specially crafted commits
which initially have distinct abbreviated SHA-1's, but for which the
abbreviated SHA-1's collide after a simple rewording of the first
commit's message.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
