This should override $HOME/.config, but we never actually tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't have a core.attributesfile configured, we fall
back to checking XDG config, which is usually
$HOME/.config/git/attributes.
However, if $HOME is unset, then home_config_paths will return
NULL, and we end up calling fopen(NULL).
Depending on your system, this may or may not cause the
accompanying test to fail (e.g., on Linux and glibc, the
address will go straight to open, which will return EFAULT).
However, valgrind will reliably notice the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git respects XDG_CONFIG_HOME for some lookups, we
must be sure to cleanse the test environment. Otherwise, the
user's XDG_CONFIG_HOME could influence the test results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to load a word one-byte-at-a-time was optimized into a
word-wide load instruction even when the pointer was not aligned,
which caused issues on architectures that do not like unaligned
access.
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
* mm/mediawiki-usability:
git-remote-mediawiki: allow page names with a ':'
git-remote-mediawiki: fix incorrect test usage in test
git-remote-mediawiki: properly deal with invalid remote revisions
git-remote-mediawiki: show progress information when getting last remote revision
git-remote-mediawiki: show progress information when listing pages
git-remote-mediawiki: use --force when adding notes
git-remote-mediawiki: get rid of O(N^2) loop
git-remote-mediawiki: make mediafiles export optional
git-remote-mediawiki: actually send empty comment when they're empty
git-remote-mediawiki: don't split namespaces with spaces
Split lower bits of ce_flags field and creates a new ce_namelen
field in the in-core index structure.
* tg/ce-namelen-field:
Strip namelen out of ce_flags into a ce_namelen field
Teach gitweb to pay attention to various forms of credits that are
similar to "Signed-off-by:" lines.
* nk/maint-gitweb-log-by-lines:
gitweb: Add support to Link: tag
gitweb: Handle other types of tag in git_print_log
gitweb: Cleanup git_print_log()
We do not document COMMIT_EDITMSG at all, but users may want
to know about it for two reasons:
1. They may want to tell their editor to configure itself
for formatting a commit message.
2. If a commit is aborted by an error, the user may want
to recover the commit message they typed.
Let's put a note in git-commit(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we do not have to risk the list of tools going out of sync
between the implementation and the documentation.
In the same spirit as bf73fc2 (difftool: print list of valid tools
with '--tool-help', 2012-03-29), trim the list of merge backends in
the documentation. We do not want to have a complete list of valid
tools; we only want a list to help people guess what kind of things
the tools do to be specified there, and refer them to --tool-help
for a complete list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The identity of the committer will ultimately be pulled from
the ident code by commit_tree(). However, we make an attempt
to check the author and committer identity early, before the
user has done any manual work like inputting a commit
message. That lets us abort without them having to worry
about salvaging the work from .git/COMMIT_EDITMSG.
The early check for committer ident does not use the
IDENT_STRICT flag, meaning that it would not find an empty
name field. The motivation was presumably because we did not
want to be too restrictive, as later calls might be more lax
(for example, when we create the reflog entry, we do not
care too much about a real name). However, because
commit_tree will always get a strict identity to put in the
commit object itself, there is no point in being lax only to
die later (and in fact it is harmful, because the user will
have wasted time typing their commit message).
Incidentally, this bug was masked prior to 060d4bb, as the
initial loose call would taint the later strict call. So the
commit would succeed (albeit with a bogus committer line in
the commit object), and nobody noticed that our early check
did not match the later one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advise() function takes a variable number of arguments
and converts them into a va_list object to pass to strbuf
for handling. However, we accidentally called strbuf_addf
(that takes a variable number of arguments) instead of
strbuf_vaddf (that takes a va_list).
This bug dates back to v1.7.8.1-1-g23cb5bf, but we never
noticed because none of the current callers passes a string
with a format specifier in it. And the compiler did not
notice because the format string is not available at
compile time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
block-sha1/ is fast on most known platforms. Clarify the Makefile to
be less misleading about that.
Early versions of block-sha1/ explicitly relied on fast htonl() and
fast 32-bit loads with arbitrary alignment. Now it uses those on some
arches but the default behavior is byte-at-a-time access for the sake
of arches like ARM, Alpha, and their kin and it is still pretty fast
on these arches (fast enough to supersede the mozilla SHA1
implementation and the hand-written ARM assembler implementation that
were bundled before).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I invoke "make block-sha1/sha1.s", 'make' runs $(CC) -S without
specifying where it should put its output and the output ends up in
./sha1.s. Confusing.
Add an -o option to the .s rule to fix this. We were already doing
that for most compiler invocations but had forgotten it for the
assembler listings.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
't' is currently always a numeric constant, but it can't hurt to
prepare for the day that it becomes useful for a caller to pass in a
more complex expression.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 660231aa (block-sha1: support for architectures with memory
alignment restrictions, 2009-08-12), blk_SHA1_Update was modified to
access 32-bit chunks of memory one byte at a time on arches that
prefer that:
#define get_be32(p) ( \
(*((unsigned char *)(p) + 0) << 24) | \
(*((unsigned char *)(p) + 1) << 16) | \
(*((unsigned char *)(p) + 2) << 8) | \
(*((unsigned char *)(p) + 3) << 0) )
The code previously accessed these values by just using htonl(*p).
Unfortunately, Michael noticed on an Alpha machine that git was using
plain 32-bit reads anyway. As soon as we convert a pointer to int *,
the compiler can assume that the object pointed to is correctly
aligned as an int (C99 section 6.3.2.3 "pointer conversions"
paragraph 7), and gcc takes full advantage by using a single 32-bit
load, resulting in a whole bunch of unaligned access traps.
So we need to obey the alignment constraints even when only dealing
with pointers instead of actual values. Do so by changing the type
of 'data' to void *. This patch renames 'data' to 'block' at the same
time to make sure all references are updated to reflect the new type.
Reported-tested-and-explained-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message from "git push $there :bogo" (and its equivalent
"git push $there --delete bogo") mentioned that we tried and failed
to guess what ref is being deleted based on the LHS of the refspec,
which we don't.
* jk/push-delete-ref-error-message:
push: don't guess at qualifying remote refs on deletion
A handful of files and directories we create had tighter than
necessary permission bits when the user wanted to have group
writability (e.g. by setting "umask 002").
* ar/clone-honor-umask-at-top:
add: create ADD_EDIT.patch with mode 0666
rerere: make rr-cache fanout directory honor umask
Restore umasks influence on the permissions of work tree created by clone
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
"git show"'s auto-walking behaviour was an unreliable and
unpredictable hack; it now behaves just like "git log" does when it
walks.
* tr/maint-show-walk:
show: fix "range implies walking"
Demonstrate git-show is broken with ranges
"git diff", "git status" and anything that internally uses the
comparison machinery was utterly broken when the difference
involved a file with "-" as its name. This was due to the way "git
diff --no-index" was incorrectly bolted on to the system, making
any comparison that involves a file "-" at the root level
incorrectly read from the standard input.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
We did not have test to make sure "git rebase" without extra options
filters out an empty commit in the original history.
* mz/empty-rebase-test:
add test case for rebase of empty commit
"git fast-export" produced an input stream for fast-import without
properly quoting pathnames when they contain SPs in them.
* js/fast-export-paths-with-spaces:
fast-export: quote paths with spaces
"git checkout --detach", when you are still on an unborn branch,
should be forbidden, but it wasn't.
* cw/no-detaching-an-unborn:
git-checkout: disallow --detach on unborn branch
Some implementations of Perl terminates "lines" with CRLF even when
the script is operating on just a sequence of bytes. Make sure to
use "$PERL_PATH", the version of Perl the user told Git to use, in
our tests to avoid unnecessary breakages in tests.
* vr/use-our-perl-in-tests:
t/README: add a bit more Don'ts
tests: enclose $PERL_PATH in double quotes
t/test-lib.sh: export PERL_PATH for use in scripts
t: Replace 'perl' by $PERL_PATH
"git log -n 1 -- rarely-touched-path" was spending unnecessary
cycles after showing the first change to find the next one, only to
discard it.
* jk/revision-walk-stop-at-max-count:
revision: avoid work after --max-count is reached
* as/t4012-style-updates:
t4012: Use test_must_fail instead of if-else
t4012: use 'printf' instead of 'dd' to generate a binary file
t4012: Re-indent test snippets
t4012: Make --shortstat test more robust
t4012: Break up pipe into serial redirections
t4012: Actually quote the sed script
t4012: Unquote git command fragment in test title
t4012: modernize style for quoting
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
In 1.7.9 era, we taught "git rebase" about the raw timestamp format
but we did not teach the same trick to "filter-branch", which rolled
a similar logic on its own. Because of this, "filter-branch" failed
to rewrite commits with ancient timestamps.
* jc/maint-filter-branch-epoch-date:
t7003: add test to filter a branch with a commit at epoch
date.c: Fix off by one error in object-header date parsing
filter-branch: do not forget the '@' prefix to force git-timestamp
When 'difftool --dir-diff' is used to compare working tree files,
it always copies files from the tmp dir back to the working tree
when the diff tool is closed, even if the files were not modified
by the diff tool.
This causes the file timestamp to change. Files should only be
copied from the tmp dir back to the working copy if they were
actually modified.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a reduced but still useful sibling of the Automake's
"automatic Makefile rebuild" feature. It's important to note that
we take care to enable the new rules only if the tree that has already
be configured with './configure', so that users relying on manual
configuration won't be negatively impacted.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
