"git fsck --connectivity-only" omits computation necessary to sift
the objects that are not reachable from any of the refs into
unreachable and dangling. This is now enabled when dangling
objects are requested (which is done by default, but can be
overridden with the "--no-dangling" option).
* jk/fsck-doc:
fsck: always compute USED flags for unreachable objects
doc/fsck: clarify --connectivity-only behavior
"git rebase" that was reimplemented in C did not set ORIG_HEAD
correctly, which has been corrected.
* js/rebase-orig-head-fix:
built-in rebase: set ORIG_HEAD just once, before the rebase
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
built-in rebase: use the correct reflog when switching branches
built-in rebase: no need to check out `onto` twice
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an idiom we're using to ensure that gc_before_repack() only
does work once (see 62aad1849f ("gc --auto: do not lock refs in the
background", 2014-05-25)) to be more obvious.
Nothing except this function cares about the "pack_refs" and
"prune_reflogs" variables, so let's not leave the reader wondering if
they're being zero'd out for later use somewhere else.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's been a lot of changing of the hardcoded "40" values to
the_hash_algo->hexsz, but we've so far missed this one where we
hardcoded 38 for the loose object file length.
This is because a SHA-1 like abcde[...] gets turned into
objects/ab/cde[...]. There's no reason to suppose the same won't be
the case for SHA-256, and reading between the lines in
hash-function-transition.txt the format is planned to be the same.
In the future we may want to further modify this code for the hash
function transition. There's a potential pathological case here where
we'll only consider the loose objects for the currently active hash,
but objects for that hash will share a directory storage with the
other hash.
Thus we could theoretically have e.g. 1k SHA-1 loose objects, and 1
million SHA-256 objects. Then not notice that we need to pack them
because we're currently using SHA-1, even though our FS may be
straining under the stress of such humongous directories.
So assuming that "gc" eventually learns to pack up both SHA-1 and
SHA-256 objects regardless of what the current the_hash_algo is,
perhaps this check should be changed to consider all files in
objects/17/ matching [0-9a-f] 38 or 62 characters in length (i.e. both
SHA-1 and SHA-256).
But none of that is something we need to worry about now, and
supporting both 38 and 62 characters depending on "the_hash_algo"
removes another case of SHA-1 hardcoding.
As noted in [1] I'm making no effort to somehow remove the hardcoding
for "2" as in "use the first two hexdigits for the directory
name". There's no indication that that'll ever change, and somehow
generalizing it here would be a drop in the ocean, so there's no point
in doing that. It also couldn't be done without coming up with some
generalized version of the magical "objects/17" directory. See [2] for
a discussion of that directory.
1. https://public-inbox.org/git/874l84ber7.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/87k1mta9x5.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as this developer can tell, the conversion from a Perl script to
a built-in caused the regression in the difftool that it no longer runs
outside of a Git worktree (with `--no-index`, of course).
It is a bit embarrassing that it took over two years after retiring the
Perl version to discover this regression, but at least we now know, and
can do something, about it.
This fixes https://github.com/git-for-windows/git/issues/2123
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will always spawn something from `git difftool`, so we will always
have to set `GIT_DIR` and `GIT_WORK_TREE`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking gc_auto_threshold in too_many_loose_objects() was added in
17815501a8 ("git-gc --auto: run "repack -A -d -l" as necessary.",
2007-09-17) when need_to_gc() itself was also reliant on
gc_auto_pack_limit before its early return:
gc_auto_threshold <= 0 && gc_auto_pack_limit <= 0
When that check was simplified to just checking "gc_auto_threshold <=
0" in b14d255ba8 ("builtin-gc.c: allow disabling all auto-gc'ing by
assigning 0 to gc.auto", 2008-03-19) this unreachable code should have
been removed. We only call too_many_loose_objects() from within
need_to_gc() itself, which will return if this condition holds, and in
cmd_gc() which will return before ever getting to "auto_gc &&
too_many_loose_objects()" if "auto_gc && !need_to_gc()" is true
earlier in the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a brown paper bag. When adding the tests, we actually failed
to verify that the config variable is heeded in git-init at all. And
when changing the original patch that marked the .git/ directory as
hidden after reading the config, it was lost on this developer that
the new code would use the hide_dotfiles variable before the config
was read.
The fix is obvious: read the (limited, pre-init) config *before*
creating the .git/ directory.
Please note that we cannot remove the identical-looking `git_config()`
call from `create_default_files()`: we create the `.git/` directory
between those calls. If we removed it, and if the parent directory is
in a Git worktree, and if that worktree's `.git/config` contained any
`init.templatedir` setting, we would all of a sudden pick that up.
This fixes https://github.com/git-for-windows/git/issues/789
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have something much better now: --rebase-merges (which is a
complete re-design --preserve-merges, with a lot of issues fixed such as
the inability to reorder commits with --preserve-merges).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git runs a stat loop to find a worktree name that's available and
then does mkdir on the found name. Turn it to mkdir loop to avoid
another invocation of worktree add finding the same free name and
creating the directory first.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passing the pathspec by value is potentially confusing, as the copy is
only a shallow copy, so save the overhead of the copy, and pass the
pathspec struct as a pointer.
In addition use copy_pathspec to copy the pathspec into
rev.prune_data, so the copy is a proper deep copy, and owned by the
revision API, as that's what the API expects.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the unused prefix parameter in do_drop_stash.
We also have an unused "prefix" parameter in the 'create_stash'
function, however we leave that in place for symmetry with the other
top-level functions.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing a list of pathspecs to, say, `git add`, we need to be
careful to use the original form, not the parsed form of the pathspecs.
This makes a difference e.g. when calling
git stash -- ':(glob)**/*.txt'
where the original form includes the `:(glob)` prefix while the parsed
form does not.
However, in the built-in `git stash`, we passed the parsed (i.e.
incorrect) form, and `git add` would fail with the error message:
fatal: pathspec '**/*.txt' did not match any files
at the stage where `git stash` drops the changes from the worktree, even
if `refs/stash` has been actually updated successfully.
This fixes https://github.com/git-for-windows/git/issues/2037
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than parse options manually, which is both difficult to
read and error prone, parse options supplied to commit-tree
using the parse-options api.
It was discovered that the --no-gpg-sign option was documented
but not implemented in commit 70ddbd7767 (commit-tree: add missing
--gpg-sign flag, 2019-01-19), and the existing implementation
would attempt to translate the option as a tree oid. It was also
suggested earlier in commit 55ca3f99ae (commit-tree: add and document
--no-gpg-sign, 2013-12-13) that commit-tree should be migrated to
utilize the parse-options api, which could help prevent mistakes
like this in the future. Hence this change.
Also update the documentation to better describe that mixing
`-m` and `-F` options will correctly compose commit log messages in the
order in which the options are given.
In the process, mark various strings for translation.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" may still want to access Git goodies like
--ext-diff and --textconv, but so far these have been ignored,
which has been corrected.
* jk/diff-no-index-initialize:
diff: reuse diff setup for --no-index case
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
"git prune" has been taught to take advantage of reachability
bitmap when able.
* jk/prune-optim:
t5304: rename "sha1" variables to "oid"
prune: check SEEN flag for reachability
prune: use bitmaps for reachability traversal
prune: lazily perform reachability traversal
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
"git prune-packed" did not notice and complain against excess
arguments given from the command line, which now it does.
* rj/prune-packed-excess-args:
prune-packed: check for too many arguments
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
* en/combined-all-paths:
log,diff-tree: add --combined-all-paths option
Update the implementation of pack-redundant for performance in a
repository with many packfiles.
* sc/pack-redundant:
pack-redundant: consistent sort method
pack-redundant: rename pack_list.all_objects
pack-redundant: new algorithm to find min packs
pack-redundant: delete redundant code
pack-redundant: delay creation of unique_objects
t5323: test cases for git-pack-redundant
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
Add a GIT_TEST_STASH_USE_BUILTIN=false test mode which is equivalent
to running with stash.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy stash version
while we're carrying both it and the new built-in version.
This imitates the equivalent treatment for the built-in rebase in
62c23938fa (tests: add a special setup where rebase.useBuiltin is off,
2018-11-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We recently converted the `git stash` command from Unix shell scripts
to builtins.
Let's end users a way out when they discover a bug in the
builtin command: `stash.useBuiltin`.
As the file name `git-stash` is already in use, let's rename the
scripted backend to `git-legacy-stash`.
To make the test suite pass with `stash.useBuiltin=false`, this commit
also backports rudimentary support for `-q` (but only *just* enough
to appease the test suite), and adds a super-ugly hack to force exit
code 129 for `git stash -h`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old shell script `git-stash.sh` was removed and replaced
entirely by `builtin/stash.c`. In order to do that, `create` and
`push` were adapted to work without `stash.sh`. For example, before
this commit, `git stash create` called `git stash--helper create
--message "$*"`. If it called `git stash--helper create "$@"`, then
some of these changes wouldn't have been necessary.
This commit also removes the word `helper` since now stash is
called directly and not by a shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid spawning write-tree child processes by replacing the calls with
in-core API calls.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commits introduces a optimization by avoiding calling the
same functions again. For example, `git stash push -u`
would call at some points the following functions:
* `check_changes()` (inside `do_push_stash()`)
* `do_create_stash()`, which calls: `check_changes()` and
`get_untracked_files()`
Note that `check_changes()` also calls `get_untracked_files()`.
So, `check_changes()` is called 2 times and `get_untracked_files()`
3 times.
The old function `check_changes()` now consists of two functions:
`get_untracked_files()` and `check_changes_tracked_files()`.
These are the call chains for `push` and `create`:
* `push_stash()` -> `do_push_stash()` -> `do_create_stash()`
* `create_stash()` -> `do_create_stash()`
To prevent calling the same functions over and over again,
`check_changes()` inside `do_create_stash()` is now placed
in the caller functions (`create_stash()` and `do_push_stash()`).
This way `check_changes()` and `get_untracked files()` are called
only one time.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash save to the helper and delete functions which are no
longer needed (`show_help()`, `save_stash()`, `push_stash()`,
`create_stash()`, `clear_stash()`, `untracked_files()` and
`no_changes()`).
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a change in behaviour with this commit. When there was
no initial commit, the shell version of stash would still display
a message. This commit makes `push` to not display any message if
`--quiet` or `-q` is specified. Add tests for `--quiet`.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash push to the helper.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash create to the helper.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Helped-by: Matthew Kraai <mkraai@its.jnj.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash store to the helper and delete the store_stash function
from the shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash show to the helper and delete the show_stash, have_stash,
assert_stash_like, is_stash_like and parse_flags_and_rev functions
from the shell script now that they are no longer needed.
In shell version, although `git stash show` accepts `--index` and
`--quiet` options, it ignores them. In C, both options are passed
further to `git diff`.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash list to the helper and delete the list_stash function
from the shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash pop to the helper and delete the pop_stash, drop_stash,
assert_stash_ref functions from the shell script now that they
are no longer needed.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash branch to the helper and delete the apply_to_branch
function from the shell script.
Checkout does not currently provide a function for checking out
a branch as cmd_checkout does a large amount of sanity checks
first that we require here.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the drop and clear commands to the builtin helper. These two
are each simple, but are being added together as they are quite
related.
We have to unfortunately keep the drop and clear functions in the
shell script as functions are called with parameters internally
that are not valid when the commands are called externally. Once
pop is converted they can both be removed.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a builtin helper for performing stash commands. Converting
all at once proved hard to review, so starting with just apply
lets conversion get started without the other commands being
finished.
The helper is being implemented as a drop in replacement for
stash so that when it is complete it can simply be renamed and
the shell script deleted.
Delete the contents of the apply_stash shell function and replace
it with a call to stash--helper apply until pop is also
converted.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As transform_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edit_todo_list() is changed to work on a todo_list, and to handle the
initial edition of the todo list (ie. making a backup of the todo
list).
It does not check for dropped commits yet, as todo_list_check() does not
take the commits that have already been processed by the rebase (ie. the
todo list is edited in the middle of a rebase session).
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As rearrange_squash_in_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way, and the error
handling is slightly improved.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As sequencer_add_exec_commands() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
complete_action() used functions that read the todo-list file, made some
changes to it, and wrote it back to the disk.
The previous commits were dedicated to separate the part that deals with
the file from the actual logic of these functions. Now that this is
done, we can call directly the "logic" functions to avoid useless file
access.
The parsing of the list has to be done by the caller. If the buffer of
the todo list provided by the caller is empty, a `noop' command is
directly added to the todo list, without touching the buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sequencer_make_script() write its script to a strbuf (ie. the
buffer of a todo_list) instead of a FILE. This reduce the amount of
read/write made by rebase interactive.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors rearrange_squash() to work on a todo_list to avoid
redundant reads and writes. The function is renamed
todo_list_rearrange_squash().
The old version created a new buffer, which was directly written to the
disk. This new version creates a new item list by just copying items
from the old item list, without creating a new buffer. This eliminates
the need to reparse the todo list, but this also means its buffer cannot
be directly written to the disk.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, rearrange_squash_in_todo_file().
complete_action() still uses rearrange_squash_in_todo_file() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors sequencer_add_exec_commands() to work on a todo_list to
avoid redundant reads and writes to the disk.
Instead of inserting the `exec' commands between the other commands and
re-parsing the buffer at the end, they are appended to the buffer once,
and a new list of items is created. Items from the old list are copied
across and new `exec' items are appended when necessary. This
eliminates the need to reparse the buffer, but this also means we have
to use todo_list_write_to_disk() to write the file.
todo_list_add_exec_commands() and sequencer_add_exec_commands() are
modified to take a string list instead of a string -- one item for each
command. This makes it easier to insert a new command to the todo list
for each command to execute.
sequencer_add_exec_commands() still reads the todo list from the disk,
as it is needed by rebase -p.
complete_action() still uses sequencer_add_exec_commands() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --connectivity-only option avoids opening every object, and instead
just marks reachable objects with a flag and compares this to the set
of all objects. This strategy is discussed in more detail in 3e3f8bd608
(fsck: prepare dummy objects for --connectivity-check, 2017-01-17).
This means that we report _every_ unreachable object as dangling.
Whereas in a full fsck, we'd have actually opened and parsed each of
those unreachable objects, marking their child objects with the USED
flag, to mean "this was mentioned by another object". And thus we can
report only the tip of an unreachable segment of the object graph as
dangling.
You can see this difference with a trivial example:
tree=$(git hash-object -t tree -w /dev/null)
one=$(echo one | git commit-tree $tree)
two=$(echo two | git commit-tree -p $one $tree)
Running `git fsck` will report only $two as dangling, but with
--connectivity-only, both commits (and the tree) are reported. Likewise,
using --lost-found would write all three objects.
We can make --connectivity-only work like the normal case by taking a
separate pass over the unreachable objects, parsing them and marking
objects they refer to as USED. That still avoids parsing any blobs,
though we do pay the cost to access any unreachable commits and trees
(which may or may not be noticeable, depending on how many you have).
If neither --dangling nor --lost-found is in effect, then we can skip
this step entirely, just like we do now. That makes "--connectivity-only
--no-dangling" just as fast as the current "--connectivity-only". I.e.,
we do the correct thing always, but you can still tweak the options to
make it faster if you don't care about dangling objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression in 7c0fe330d5 (rev-list: handle missing tree
objects properly, 2018-10-05) where rev-list will now complain about the
empty tree when it doesn't physically exist on disk.
Before that commit, we relied on the traversal code in list-objects.c to
walk through the trees. Since it uses parse_tree(), we'd do a normal
object lookup that includes looking in the set of "cached" objects
(which is where our magic internal empty-tree kicks in).
After that commit, we instead tell list-objects.c not to die on any
missing trees, and we check them ourselves using has_object_file(). But
that function uses OBJECT_INFO_SKIP_CACHED, which means we won't use our
internal empty tree.
This normally wouldn't come up. For most operations, Git will try to
write out the empty tree object as it would any other object. And
pack-objects in a push or fetch will send the empty tree (even if it's
virtual on the sending side). However, there are cases where this can
matter. One I found in the wild:
1. The root tree of a commit became empty by deleting all files,
without using an index. In this case it was done using libgit2's
tree builder API, but as the included test shows, it can easily be
done with regular git using hash-object.
The resulting repo works OK, as we'd avoid walking over our own
reachable commits for a connectivity check.
2. Cloning with --reference pointing to the repository from (1) can
trigger the problem, because we tell the other side we already have
that commit (and hence the empty tree), but then walk over it
during the connectivity check (where we complain about it missing).
Arguably the workflow in step (1) should be more careful about writing
the empty tree object if we're referencing it. But this workflow did
work prior to 7c0fe330d5, so let's restore it.
This patch makes the minimal fix, which is to swap out a direct call to
oid_object_info_extended(), minus the SKIP_CACHED flag, instead of
calling has_object_file(). This is all that has_object_file() is doing
under the hood. And there's little danger of unrelated fallout from
other unexpected "cached" objects, since there's only one call site that
ends such a cached object, and it's in git-blame.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default SIGPIPE behavior can be useful for a command that generates
a lot of output: if the receiver of our output goes away, we'll be
notified asynchronously to stop generating it (typically by killing the
program).
But for a command like fetch, which is primarily concerned with
receiving data and writing it to disk, an unexpected SIGPIPE can be
awkward. We're already checking the return value of all of our write()
calls, and dying due to the signal takes away our chance to gracefully
handle the error.
On Linux, we wouldn't generally see SIGPIPE at all during fetch. If the
other side of the network connection hangs up, we'll see ECONNRESET. But
on OS X, we get a SIGPIPE, and the process is killed. This causes t5570
to racily fail, as we sometimes die by signal (instead of the expected
die() call) when the server side hangs up.
Let's ignore SIGPIPE during the network portion of the fetch, which will
cause our write() to return EPIPE, giving us consistent behavior across
platforms.
This fixes the test flakiness, but note that it stops short of fixing
the larger problem. The server side hit a fatal error, sent us an "ERR"
packet, and then hung up. We notice the failure because we're trying to
write to a closed socket. But by dying immediately, we never actually
read the ERR packet and report its content to the user. This is a (racy)
problem on all platforms. So this patch lays the groundwork from which
that problem might be fixed consistently, but it doesn't actually fix
it.
Note the placement of the SIGPIPE handling. The absolute minimal change
would be to ignore SIGPIPE only when we're writing. But twiddling the
signal handler for each write call is inefficient and maintenance
burden. On the opposite end of the spectrum, we could simply declare
that fetch does not need SIGPIPE handling, since it doesn't generate a
lot of output, and we could just ignore it at the start of cmd_fetch().
This patch takes a middle ground. It ignores SIGPIPE during the network
operation (which is admittedly most of the program, since the actual
network operations are all done under the hood by the transport code).
So it's still pretty coarse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Technically, the scripted version set ORIG_HEAD only in two spots (which
really could have been one, because it called `git checkout $onto^0` to
start the rebase and also if it could take a shortcut, and in both cases
it called `git update-ref $orig_head`).
Practically, it *implicitly* reset ORIG_HEAD whenever `git reset --hard`
was called.
However, what we really want is that it is set exactly once, at the
beginning of the rebase.
So let's do that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By mistake, we used the reflog intended for ORIG_HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case that the rebase boils down to a fast-forward, the built-in
rebase reset the working tree twice: once to start the rebase at `onto`,
then realizing that the original (pre-rebase) HEAD was an ancestor and
we basically already fast-forwarded to the post-rebase HEAD,
`reset_head()` was called to update the original ref and to point HEAD
back to it.
That second `reset_head()` call does not need to touch the working tree,
though, as it does not change the actual tip commit (and therefore the
working tree should stay unchanged anyway): only the ref needs to be
updated (because the rebase detached the HEAD, and we want to go back to
the branch on which the rebase was started).
But that second `reset_head()` was called without the flag to leave the
working tree alone (the reason: when that call was introduced, that flag
was not yet even thought of). Let's avoid that unnecessary work by
passing that flag.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.
Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.
Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.
Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)
We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--no-index" is in effect (or implied by the arguments), git-diff
jumps early to a special code path to perform that diff. This means we
miss out on some settings like enabling --ext-diff and --textconv by
default.
Let's jump to the no-index path _after_ we've done more setup on
rev.diffopt. Since some of the options don't affect us (e.g., items
related to the index), let's re-order the setup into two blocks (see the
in-code comments).
Note that we also need to stop re-initializing the diffopt struct in
diff_no_index(). This should not be necessary, as it will already have
been initialized by cmd_diff() (and there are no other callers). That in
turn lets us drop the "repository" argument from diff_no_index (which
never made much sense, since the whole point is that you don't need a
repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When studying the performance of 'git push' we would like to know
how much time is spent at various parts of the command. One area
that could cause performance trouble is 'git pack-objects'.
Add trace2 regions around the three main actions taken in this
command:
1. Enumerate objects.
2. Prepare pack.
3. Write pack-file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The make_cover_letter() function is supposed to open a new file for
writing, and let the caller write into it via FILE *rev->diffopt.file
but because the function does not return anything, the caller does not
bother checking the return value.
Make sure it dies, instead of keep going with a NULL output
filestream and relying on it to cause a crash, when it fails to
open the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve_ref_unsafe() function can, and sometimes will in the case
of this codepath, return the char * passed to it to the caller. In
this case we construct a strbuf, free it, and then continue using the
dst_name after that free().
The code being fixed dates back to da3efdb17b ("receive-pack: detect
aliased updates which can occur with symrefs", 2010-04-19). When it
was originally added it didn't have this bug, it was introduced when
it was subsequently modified to use strbuf in 6b01ecfe22 ("ref
namespaces: Support remote repositories via upload-pack and
receive-pack", 2011-07-08).
This is theoretically a security issue, the C standard makes no
guarantees that a value you use after free() hasn't been poked at or
changed by something else on the system, but in practice modern OSs
will have mapped the relevant page to this process, so nothing else
would have used it. We do no further allocations between the free()
and use-after-free, so we ourselves didn't corrupt or change the
value.
Jeff investigated that and found: "It probably would be an issue if
the allocation were larger. glibc at least will use mmap()/munmap()
after some cutoff[1], in which case we'd get a segfault from hitting
the unmapped page. But for small allocations, it just bumps brk() and
the memory is still available for further allocations after
free(). [...] If you had a sufficiently large refname you might be
able to trigger the bug [...]. I tried to push such a ref. I had to
manually make a packed-refs file with the long name to avoid
filesystem limits (though probably you could have a long a/b/c/ name
on ext4). But the result can't actually be pushed, because it all has
to fit into a 64k pkt-line as part of the push protocol.".
An a alternative and more succinct way of implementing this would have
been to do the strbuf_release() at the end of check_aliased_update()
and use "goto out" instead of the early "return" statements. Hopefully
this approach of using a helper instead makes it easier to follow.
1. Jeff: "Weirdly, the mmap() cutoff on my glibc system is 135168
bytes. Which is...2^17 + 2^12? 33 pages? I'm sure there's a good
reason for that, but I didn't dig into it."
Reported-by: 王健强 <jianqiang.wang@securitygossip.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().
This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.
The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed. These flags enable the hook to optimize its response to the
index change notification.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-prune command checks reachability by doing a traversal, and then
checking whether a given object exists in the global object hash. This
can yield false positives if any other part of the code had to create an
object struct for some reason. It's not clear whether this is even
possible, but it's more robust to rely on something a little more
concrete: the SEEN flag set by our traversal.
Note that there is a slight possibility of regression here, as we're
relying on mark_reachable_objects() to consistently set the flag.
However, it has always done so, and we're already relying on that fact
in prune_shallow(), which is called as part of git-prune. So this is
making these two parts of the prune operation more consistent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The general strategy of "git prune" is to do a full reachability walk,
then for each loose object see if we found it in our walk. But if we
don't have any loose objects, we don't need to do the expensive walk in
the first place.
This patch postpones that walk until the first time we need to see its
results.
Note that this is really a specific case of a more general optimization,
which is that we could traverse only far enough to find the object under
consideration (i.e., stop the traversal when we find it, then pick up
again when asked about the next object, etc). That could save us in some
instances from having to do a full walk. But it's actually a bit tricky
to do with our traversal code, and you'd need to do a full walk anyway
if you have even a single unreachable object (which you generally do, if
any objects are actually left after running git-repack).
So in practice this lazy-load of the full walk catches one easy but
common case (i.e., you've just repacked via git-gc, and there's nothing
unreachable).
The perf script is fairly contrived, but it does show off the
improvement:
Test HEAD^ HEAD
-------------------------------------------------------------------------
5304.4: prune with no objects 3.66(3.60+0.05) 0.00(0.00+0.00) -100.0%
and would let us know if we accidentally regress this optimization.
Note also that we need to take special care with prune_shallow(), which
relies on us having performed the traversal. So this optimization can
only kick in for a non-shallow repository. Since this is easy to get
wrong and is not covered by existing tests, let's add an extra test to
t5304 that covers this case explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "rebase -i --reschedule-failed-exec", we do not want the "-y"
shortcut after all.
* js/rebase-i-redo-exec-fix:
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
"git checkout [<tree-ish>] <pathspec>" started reporting the number
of paths that have got updated recently, but the same messages were
given when "git checkout -m <pathspec>" to unresolve conflicts that
have just been resolved. The message now reports these unresolved
paths separately from the paths that are checked out from the index.
* nd/checkout-noisy-unmerge:
checkout: count and print -m paths separately
checkout: update count-checkouts messages
This teaches submodule--helper config the --unset option, which removes
the specified configuration key from the .gitmodule file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combined diff format for merges will only list one filename, even if
rename or copy detection is active. For example, with raw format one
might see:
::100644 100644 100644 fabadb8cc95eb04866510 MM describe.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR phooey.c
This doesn't let us know what the original name of bar.sh was in the
first parent, and doesn't let us know what either of the original names
of phooey.c were in either of the parents. In contrast, for non-merge
commits, raw format does provide original filenames (and a rename score
to boot). In order to also provide original filenames for merge
commits, add a --combined-all-paths option (which must be used with
either -c or --cc, and is likely only useful with rename or copy
detection active) so that we can print tab-separated filenames when
renames are involved. This transforms the above output to:
::100644 100644 100644 fabadb8cc95eb04866510 MM desc.c desc.c desc.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM foo.sh bar.sh bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR fooey.c fuey.c phooey.c
Further, in patch format, this changes the from/to headers so that
instead of just having one "from" header, we get one for each parent.
For example, instead of having
--- a/phooey.c
+++ b/phooey.c
we would see
--- a/fooey.c
--- a/fuey.c
+++ b/phooey.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
"git rebase -x $cmd" did not reject multi-line command, even though
the command is incapable of handling such a command. It now is
rejected upfront.
* pw/rebase-x-sanity-check:
rebase -x: sanity check command
The documentation of "git commit-tree" said that the command
understands "--gpg-sign" in addition to "-S", but the command line
parser did not know about the longhand, which has been corrected.
* br/commit-tree-fully-spelled-gpg-sign-option:
commit-tree: add missing --gpg-sign flag
t7510: invoke git as part of &&-chain
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
* ds/push-sparse-tree-walk:
pack-objects: create GIT_TEST_PACK_SPARSE
pack-objects: create pack.useSparse setting
revision: implement sparse algorithm
list-objects: consume sparse tree walk
revision: add mark_tree_uninteresting_sparse
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.
* lt/date-human:
Add `human` date format tests.
Add `human` format to test-tool
Add 'human' date format documentation
Replace the proposed 'auto' mode with 'auto:'
Add 'human' date format
Code cleanup.
* jk/unused-parameter-cleanup:
convert: drop path parameter from actual conversion functions
convert: drop len parameter from conversion checks
config: drop unused parameter from maybe_remove_section()
show_date_relative(): drop unused "tz" parameter
column: drop unused "opts" parameter in item_length()
create_bundle(): drop unused "header" parameter
apply: drop unused "def" parameter from find_name_gnu()
match-trees: drop unused path parameter from score functions
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
Instead of going through "git-rebase--am" scriptlet to use the "am"
backend, the built-in version of "git rebase" learned to drive the
"am" backend directly.
* js/rebase-am:
built-in rebase: call `git am` directly
rebase: teach `reset_head()` to optionally skip the worktree
rebase: avoid double reflog entry when switching branches
rebase: move `reset_head()` into a better spot
More code in "git bisect" has been rewritten in C.
* tt/bisect-in-c:
bisect--helper: `bisect_start` shell function partially in C
bisect--helper: `get_terms` & `bisect_terms` shell function in C
bisect--helper: `bisect_next_check` shell function in C
bisect--helper: `check_and_set_terms` shell function in C
wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
bisect--helper: `bisect_write` shell function in C
bisect--helper: `bisect_reset` shell function in C
"git cat-file --batch" reported a dangling symbolic link by
mistake, when it wanted to report that a given name is ambiguous.
* dt/cat-file-batch-ambiguous:
t1512: test ambiguous cat-file --batch and --batch-output
Do not print 'dangling' for cat-file in case of ambiguity
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
Since 0f086e6dca (checkout: print something when checking out paths -
2018-11-13), this command reports how many paths have been updated
from what source (either from a tree, or from the index). I forget
that there's a third source: when -m is used, the merge conflict is
re-created (granted, also from the index, but it's not a straight copy
from the index).
Count and report unmerged paths separately. There's a bit more update
to avoid reporting:
Recreated X merge conflicts
Updated 0 paths from the index
The second line is unnecessary. Though if there's no conflict
recreation, we still report
Updated 0 paths from the index
to make it clear we're not really doing anything.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0f086e6dca [1] counts the number of files updated by "git
checkout -- <paths>" command and prints it. Later on 536ec1839d [2]
adds the ability to remove files in "git checkout -- <paths>". This is
still an update on worktree and should be reported to the user.
To prepare for such an update since that commit is on track to
'master' now, the messages are rephrased to avoid "checked out" which
does not imply file deletion.
[1] 0f086e6dca (checkout: print something when checking out paths -
2018-11-13)
[2] 536ec1839d (entry: support CE_WT_REMOVE flag in checkout_entry -
2018-12-20)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch was contributed only as a tentative "we could introduce a
convenient short option if we do not want to change the default behavior
in the long run" patch, opening the discussion whether other people
agree with deprecating the current behavior in favor of the rescheduling
behavior.
But the consensus on the Git mailing list was that it would make sense
to show a warning in the near future, and flip the default
rebase.rescheduleFailedExec to reschedule failed `exec` commands by
default. See e.g.
<CAGZ79kZL5CRqCDRb6B-EedUm8Z_i4JuSF2=UtwwdRXMitrrOBw@mail.gmail.com>
So let's back out that patch that added the `-y` short option that we
agreed was not necessary or desirable.
This reverts commit 81ef8ee75d.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GIT_SEQUENCE_EDITOR is set, the command was incorrectly
started when modes of "git rebase" that implicitly uses the
machinery for the interactive rebase are run, which has been
corrected.
* pw/no-editor-in-rebase-i-implicit:
implicit interactive rebase: don't run sequence editor
"git checkout -b <new> [HEAD]" to create a new branch from the
current commit and check it out ought to be a no-op in the index
and the working tree in normal cases, but there are corner cases
that do require updates to the index and the working tree. Running
it immediately after "git clone --no-checkout" is one of these
cases that an earlier optimization kicked in incorrectly, which has
been fixed.
* bp/checkout-new-branch-optim:
checkout: fix regression in checkout -b on intitial checkout
checkout: add test demonstrating regression with checkout -b on initial commit
"git pack-objects" incorrectly used uninitialized mutex, which has
been corrected.
* ph/pack-objects-mutex-fix:
pack-objects: merge read_lock and lock in packing_data struct
pack-objects: move read mutex to packing_data struct
The codepath to show progress meter while writing out commit-graph
file has been improved.
* ab/commit-graph-write-progress:
commit-graph write: emit a percentage for all progress
commit-graph write: add itermediate progress
commit-graph write: remove empty line for readability
commit-graph write: add more descriptive progress output
commit-graph write: show progress for object search
commit-graph write: more descriptive "writing out" output
commit-graph write: add "Writing out" progress output
commit-graph: don't call write_graph_chunk_extra_edges() unnecessarily
commit-graph: rename "large edges" to "extra edges"
"git add --ignore-errors" did not work as advertised and instead
worked as an unintended synonym for "git add --renormalize", which
has been fixed.
* jk/add-ignore-errors-bit-assignment-fix:
add: use separate ADD_CACHE_RENORMALIZE flag
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
tests: define GIT_TEST_SIDEBAND_ALL
{fetch,upload}-pack: sideband v2 fetch response
sideband: reverse its dependency on pkt-line
pkt-line: introduce struct packet_writer
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
SZEDER reported that test case t5323 has different test result on MacOS.
This is because `cmp_pack_list_reverse` cannot give identical result
when two pack being sorted has the same size of remaining_objects.
Changes to the sorting function will make consistent test result for
t5323.
The new algorithm to find redundant packs is a trade-off to save memory
resources, and the result of it may be different with old one, and may
be not the best result sometimes. Update t5323 for the new algorithm.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New algorithm uses `pack_list.all_objects` to track remaining objects,
so rename it to `pack_list.remaining_objects`.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `git pack-redundant --all`, if there are too many local
packs and too many redundant objects within them, the too deep iteration
of `get_permutations` will exhaust all the resources, and the process of
`git pack-redundant` will be killed.
The following script could create a repository with too many redundant
packs, and running `git pack-redundant --all` in the `test.git` repo
will die soon.
#!/bin/sh
repo="$(pwd)/test.git"
work="$(pwd)/test"
i=1
max=199
if test -d "$repo" || test -d "$work"; then
echo >&2 "ERROR: '$repo' or '$work' already exist"
exit 1
fi
git init -q --bare "$repo"
git --git-dir="$repo" config gc.auto 0
git --git-dir="$repo" config transfer.unpackLimit 0
git clone -q "$repo" "$work" 2>/dev/null
while :; do
cd "$work"
echo "loop $i: $(date +%s)" >$i
git add $i
git commit -q -sm "loop $i"
git push -q origin HEAD:master
printf "\rCreate pack %4d/%d\t" $i $max
if test $i -ge $max; then break; fi
cd "$repo"
git repack -q
if test $(($i % 2)) -eq 0; then
git repack -aq
pack=$(ls -t $repo/objects/pack/*.pack | head -1)
touch "${pack%.pack}.keep"
fi
i=$((i+1))
done
printf "\ndone\n"
To get the `min` unique pack list, we can replace the iteration in
`minimize` function with a new algorithm, and this could solve this
issue:
1. Get the unique and non_uniqe packs, add the unique packs to the
`min` list.
2. Remove the objects of unique packs from non_unique packs, then each
object left in the non_unique packs will have at least two copies.
3. Sort the non_unique packs by the objects' size, more objects first,
and add the first non_unique pack to `min` list.
4. Drop the duplicated objects from other packs in the ordered
non_unique pack list, and repeat step 3.
Some test cases will fail on Mac OS X. Mark them and will resolve in
later commit.
Original PR and discussions: https://github.com/jiangxin/git/pull/25
Signed-off-by: Sun Chao <sunchao9@huawei.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The objects in alt-odb are removed from `all_objects` twice in `load_all_objects`
and `scan_alt_odb_packs`, remove it from the later function.
Signed-off-by: Sun Chao <sunchao9@huawei.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of initializing unique_objects in `add_pack()`, copy from
all_objects in `cmp_two_packs()`, when unwanted objects are removed from
all_objects.
This will save memory (no allocate memory for alt-odb packs), and run
`llist_sorted_difference_inplace()` only once when removing ignored
objects and removing objects in alt-odb in `scan_alt_odb_packs()`.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts 1495ff7da5 ("checkout: introduce checkout.overlayMode
config", 2019-01-08) and thus removes the checkout.overlayMode config
option.
The option was originally introduced to give users the option to make
the new no-overlay behaviour the default. However users may be using
'git checkout' in scripts, even though it is porcelain. Users setting
the option to false may actually end up accidentally breaking scripts.
With the introduction of a new subcommand that will make the behaviour
the default, the config option will not be needed anymore anyway.
Revert the commit and remove the config option, so we don't risk
breaking scripts.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't use NEED_WORK_TREE when running the git-describe builtin,
since you should be able to describe a commit even in a bare repository.
However, the --dirty flag does need a working tree. Since we don't call
setup_work_tree(), it uses whatever directory we happen to be in. That's
unlikely to match our index, meaning we'd say "dirty" even when the real
working tree is clean.
We can fix that by calling setup_work_tree() once we know that the user
has asked for --dirty.
The --broken option also needs a working tree. But because its
implementation calls git-diff-index we don‘t have to setup the working
tree in the git-describe process.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives an empty argument to --exec then git creates a todo
list that it cannot parse. The rebase starts to run before erroring out
with
error: missing arguments for exec
error: invalid line 2: exec
You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
Or you can abort the rebase with 'git rebase --abort'.
Instead check for empty commands before starting the rebase.
Also check that the command does not contain any newlines as the
todo-list format is unable to cope with multiline commands. Note that
this changes the behavior, before this change one could do
git rebase --exec='echo one
exec echo two'
and it would insert two exec lines in the todo list, now it will error
out.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Custom userformat "log --format" learned %S atom that stands for
the tip the traversal reached the commit from, i.e. --source.
* it/log-format-source:
log: add %S option (like --source) to log --format
"git add -e" got confused when the change it wants to let the user
edit is smaller than the previous change that was left over in a
temporary file.
* js/add-e-clear-patch-before-stating:
add --edit: truncate the patch file
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
"git rebase" internally runs "checkout" to switch between branches,
and the command used to call the post-checkout hook, but the
reimplementation stopped doing so, which is getting fixed.
* os/rebase-runs-post-checkout-hook:
rebase: run post-checkout hook on checkout
t5403: simplify by using a single repository
"git fetch --recurse-submodules" may not fetch the necessary commit
that is bound to the superproject, which is getting corrected.
* sb/submodule-recursive-fetch-gets-the-tip:
fetch: ensure submodule objects fetched
submodule.c: fetch in submodules git directory instead of in worktree
submodule: migrate get_next_submodule to use repository structs
repository: repo_submodule_init to take a submodule struct
submodule: store OIDs in changed_submodule_names
submodule.c: tighten scope of changed_submodule_names struct
submodule.c: sort changed_submodule_names before searching it
submodule.c: fix indentation
sha1-array: provide oid_array_filter
There were many places the code relied on the string returned from
getenv() to be non-volatile, which is not true, that have been
corrected.
* jk/save-getenv-result:
builtin_diff(): read $GIT_DIFF_OPTS closer to use
merge-recursive: copy $GITHEAD strings
init: make a copy of $GIT_DIR string
config: make a copy of $GIT_CONFIG string
commit: copy saved getenv() result
get_super_prefix(): copy getenv() result
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
This refactors check_todo_list() to work on a todo_list to avoid
redundant reads and writes to the disk. The function is renamed
todo_list_check(). The parsing of the two todo lists is left to the
caller.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, check_todo_list_from_file(). It reads the file
from the disk, parses it, pass the todo_list to todo_list_check(), and
writes it back to the disk.
As get_missing_commit_check_level() and the enum
missing_commit_check_level are no longer needed inside of sequencer.c,
they are moved to rebase-interactive.c, and made static again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors transform_todos() to work on a todo_list. The function
is renamed todo_list_transform().
As rebase -p still need to check the todo list from the disk, a new
function is introduced, transform_todo_file(). It is still used by
complete_action() and edit_todo_list() for now, but they will be
replaced in a future commit.
todo_list_transform() is not a static function, because it will be used
by edit_todo_list() from rebase-interactive.c in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the packing_data lock to obd_lock and upgrade it to a recursive
mutex to make it suitable for current read_lock usages. Additionally
remove the superfluous #ifndef NO_PTHREADS guard around mutex
initialization in prepare_packing_data as the mutex functions
themselves are already protected.
Signed-off-by: Patrick Hogg <phogg@novamoon.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ac77d0c37 ("pack-objects: shrink size field in struct object_entry",
2018-04-14) added an extra usage of read_lock/read_unlock in the newly
introduced oe_get_size_slow for thread safety in parallel calls to
try_delta(). Unfortunately oe_get_size_slow is also used in serial
code, some of which is called before the first invocation of
ll_find_deltas. As such the read mutex is not guaranteed to be
initialized.
Resolve this by moving the read mutex to packing_data and initializing
it in prepare_packing_data which is initialized in cmd_pack_objects.
Signed-off-by: Patrick Hogg <phogg@novamoon.net>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_SEQUENCE_EDITOR is set then rebase runs it when executing
implicit interactive rebases which are supposed to appear
non-interactive to the user. Fix this by setting GIT_SEQUENCE_EDITOR=:
rather than GIT_EDITOR=:. A couple of tests relied on the old behavior
so they are updated to work with the new regime.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does
not allow access to parse_opt_ctx_t, which sometimes is useful
(e.g. to obtain the prefix).
Extending parse_opt_cb to take parse_opt_cb could result in a lot of
changes. Instead let's just allow ll_callback to be used with
OPTION_CALLBACK. The user will have to be careful, not to change
anything in ctx, or return wrong result code. But that's the price for
ll_callback.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give names to these magic negative numbers. Make parse_opt_ll_cb
return an enum to make clear it can actually control parse_options()
with different return values (parse_opt_cb can too, but nobody needs
it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lowlevel callbacks have different function signatures. Add a new field
in 'struct option' with the right type for lowlevel callbacks.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have a remote named "jch" and it has a branch with the same name. And
fetch.output is set to "compact". Fetching this remote looks like this
From https://github.com/gitster/git
+ eb7fd39f6b...835363af2f jch -> */jch (forced update)
6f11fd5edb..59b12ae96a nd/config-move-to -> jch/*
* [new branch] nd/diff-parseopt -> jch/*
* [new branch] nd/the-index-final -> jch/*
Notice that the local side of branch jch starts with "*" instead of
ending with it like the rest. It's not exactly wrong. It just looks
weird.
This patch changes the find-and-replace code a bit to try finding prefix
first before falling back to strstr() which finds a substring from left
to right. Now we have something less OCD
From https://github.com/gitster/git
+ eb7fd39f6b...835363af2f jch -> jch/* (forced update)
6f11fd5edb..59b12ae96a nd/config-move-to -> jch/*
* [new branch] nd/diff-parseopt -> jch/*
* [new branch] nd/the-index-final -> jch/*
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to pass a header struct to create_bundle(); it writes
the header information directly to a descriptor (and does not report
back details to the caller).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a 'checkout -b' do a full checkout including updating the working
tree when doing the initial checkout. As the new test involves an filesystem
access, do it later in the sequence to give chance to other cheaper tests to
leave early. This fixes the regression in behavior caused by fa655d8411
(checkout: optimize "git checkout -b <new_branch>", 2018-08-16).
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --gpg-sign option in commit-tree, which was documented, but not
implemented, in 55ca3f99ae. Add tests for the --gpg-sign option.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return values -1 and -2 from get_oid could mean two different
things, depending on whether they were from an enum returned by
get_tree_entry_follow_symlinks, or from a different code path. This
caused 'dangling' to be printed from a git cat-file in the case of an
ambiguous (-2) result.
Unify the results of get_oid* and get_tree_entry_follow_symlinks to be
one common type, with unambiguous values.
Signed-off-by: David Turner <novalis@novalis.org>
Reported-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and "git repack" did not close the open packfiles that
they found unneeded before removing them, which didn't work on a
platform incapable of removing an open file. This has been
corrected.
* js/gc-repack-close-before-remove:
gc/repack: release packs when needed
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
"git stripspace" should be usable outside a git repository, but
under the "-s" or "-c" mode, it didn't.
* jn/stripspace-wo-repository:
stripspace: allow -s/-c outside git repository
"git submodule update" ought to use a single job unless asked, but
by mistake used multiple jobs, which has been fixed.
* sb/submodule-fetchjobs-default-to-one:
submodule update: run at most one fetch job unless otherwise set
This adds --date=human, which skips the timezone if it matches the
current time-zone, and doesn't print the whole date if that matches (ie
skip printing year for dates that are "this year", but also skip the
whole date itself if it's in the last few days and we can just say what
weekday it was).
For really recent dates (same day), use the relative date stamp, while
for old dates (year doesn't match), don't bother with time and timezone.
Also add 'auto' date mode, which defaults to human if we're using the
pager. So you can do
git config --add log.date auto
and your "git log" commands will show the human-legible format unless
you're scripting things.
Note that this time format still shows the timezone for recent enough
events (but not so recent that they show up as relative dates). You can
combine it with the "-local" suffix to never show timezones for an even
more simplified view.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the scripted `git rebase` still has to rely on the
`git-rebase--am.sh` script to implement the glue between the `rebase`
and the `am` commands, we can go a more direct route in the built-in
rebase and avoid using a shell script altogether.
This patch represents a straight-forward port of `git-rebase--am.sh` to
C, along with the glue code to call it directly from within
`builtin/rebase.c`.
This reduces the chances of Git for Windows running into trouble due to
problems with the POSIX emulation layer (known as "MSYS2 runtime",
itself a derivative of the Cygwin runtime): when no shell script is
called, the POSIX emulation layer is avoided altogether.
Note: we pass an empty action to `reset_head()` here when moving back to
the original branch, as no other action is applicable, really. This
parameter is used to initialize `unpack_trees()`' messages.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is what the legacy (scripted) rebase does in
`move_to_original_branch`, and we will need this functionality in the
next commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching a branch *and* updating said branch to a different
revision, let's avoid a double entry in HEAD's reflog by first updating
the branch and then adjusting the symbolic ref HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the next commits, we want to make use of it in `run_am()` (i.e.
running the `--am` backend directly, without detouring to Unix shell
script code) which in turn will be called from `run_specific_rebase()`.
So let's move it before that latter function.
This commit is best viewed using --color-moved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test variable GIT_TEST_PACK_SPARSE to enable the sparse
object walk algorithm by default during the test suite. Enabling
this variable ensures coverage in many interesting cases, such as
shallow clones, partial clones, and missing objects.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--sparse' flag in 'git pack-objects' changes the algorithm
used to enumerate objects to one that is faster for individual
users pushing new objects that change only a small cone of the
working directory. The sparse algorithm is not recommended for a
server, which likely sends new objects that appear across the
entire working directory.
Create a 'pack.useSparse' setting that enables this new algorithm.
This allows 'git push' to use this algorithm without passing a
'--sparse' flag all the way through four levels of run_command()
calls.
If the '--no-sparse' flag is set, then this config setting is
overridden.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>