"git check-attr" learned to take an optional tree-ish to read the
.gitattributes file from.
* kn/attr-from-tree:
attr: add flag `--source` to work with tree-ish
t0003: move setup for `--all` into new block
Three hyphens are rendered verbatim in documentation, so "--" has to be
used to produce a dash. Fix asciidoc output for dashes. This is
similar to previous commits f0b922473e (Documentation: render special
characters correctly, 2021-07-29) and de82095a95 (doc
hash-function-transition: fix asciidoc output, 2021-02-05).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document ORIG_HEAD a bit more.
* pb/doc-orig-head:
git-rebase.txt: add a note about 'ORIG_HEAD' being overwritten
revisions.txt: be explicit about commands writing 'ORIG_HEAD'
git-merge.txt: mention 'ORIG_HEAD' in the Description
git-reset.txt: mention 'ORIG_HEAD' in the Description
git-cherry-pick.txt: do not use 'ORIG_HEAD' in example
The cURL one hasn't cooked for a week in 'next', but let's fast
track it so that linux-musl CI job would be happy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commits added clarifications to the column alignment
placeholders, note that the spaces are optional around the parameters.
Also, a proposed extension [1] to allow hard truncation (without
ellipsis '..') highlighted that the existing code does not play well
with wide characters, such as Asian fonts and emojis.
For example, N wide characters take 2N columns so won't fit an odd number
column width, causing misalignment somewhere.
Further analysis also showed that decomposed characters, e.g. separate
`a` + `umlaut` Unicode code-points may also be mis-counted, in some cases
leaving multiple loose `umlauts` all combined together.
Add some notes about these limitations, and add basic tests to demonstrate
them.
The chosen solution for the tests is to substitute any wide character
that overlaps a splitting boundary for the unicode vertical ellipsis
code point as a rare but 'obvious' substitution.
An alternative could be the substitution with a single dot '.' which
matches regular expression usage, and our two dot ellipsis, and further
in scenarios where the bulk of the text is wide characters, would be
obvious. In mainly 'ascii' scenarios a singleton emoji being substituted
by a dot could be confusing.
It is enough that the tests fail cleanly. The final choice for the
substitute character can be deferred.
[1]
https://lore.kernel.org/git/20221030185614.3842-1-philipoakley@iee.email/
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a7f01c6b4d (pretty: support truncating in %>, %< and %><,
2013-04-19) added the use of ellipsis when truncating placeholder
values.
Show our 'two dot' ellipsis, and examples for the left, middle and
right truncation to avoid any confusion as to which end of the string
is adjusted. (cf justification and sub-string).
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 066790d7cb (pretty.c: support <direction>|(<negative number>) forms,
2016-06-16) added the option for right justified column alignment without
updating the documentation.
Add an explanation of its use of negative column values.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a57523428b (pretty: support padding placeholders, %< %> and %><,
2013-04-19) introduced column width place holders. It also added
separate column position `%<|(` placeholders for display screen based
placement.
Change the display screen parameter reference from 'N' to 'M' and
corresponding descriptives to make the distinction clearer.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a57523428b (pretty: support padding placeholders, %< %> and %><,
2013-04-19) introduced columnated place holders. These placeholders
can be confusing as they contain `<` and `>` characters as part
of their placeholders adjacent to the `<N>` parameters.
Add spaces either side of the `<N>` parameters in the title line.
The code (strtol) will consume any spaces around the number values
(assuming they are passed as a quoted string with spaces).
Note that the spaces are optional.
Subsequent commits will clarify other confusions.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text read as if "git checkout -b/-B name" were
equivalent to "git branch [-f] name", which clearly was not
what we wanted to say.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -f name start" forces to recreate the named branch, but
the forcing does not defeat the "do not touch a branch that is
checked out elsewhere" safety valve.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With Asciidoctor, all of the '+' introduced in a797c0ea04 ("cat-file:
add mailmap support to --batch-check option", 2022-12-20) render
literally rather than functioning as list continuations. With asciidoc,
this renders just fine. It's not too surprising that there is room for
ambiguity and surprises here, since we have lists within lists.
Simply replacing all of these '+' with empty lines makes this render
fine using both tools. Except, in the third hunk, where after this inner
'*' list ends, we want to continue with more contents of the outer list
item (`--batch-command=<format>`). We can solve any ambiguity here and
make this clear to both tools by wrapping the inner list in an open
block (using "--").
For consistency, let's wrap all three of these inner lists from
a797c0ea04 in open blocks. This also future-proofs us a little -- if we
ever gain more contents after any of those first two lists, as we did
already in a797c0ea04 for the third list, we're prepared and should
render fine with both asciidoc and Asciidoctor from the start.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce an optional configuration to allow the trailing hash that
protects the index file from bit flipping.
* ds/omit-trailing-hash-in-index:
features: feature.manyFiles implies fast index writes
test-lib-functions: add helper for trailing hash
read-cache: add index.skipHash config option
hashfile: allow skipping the hash function
Conditionally skip the pre-applypatch and applypatch-msg hooks when
applying patches with 'git am'.
* tr/am--no-verify:
am: allow passing --no-verify flag
The contents of the .gitattributes files may evolve over time, but "git
check-attr" always checks attributes against them in the working tree
and/or in the index. It may be beneficial to optionally allow the users
to check attributes taken from a commit other than HEAD against paths.
Add a new flag `--source` which will allow users to check the
attributes against a commit (actually any tree-ish would do). When the
user uses this flag, we go through the stack of .gitattributes files but
instead of checking the current working tree and/or in the index, we
check the blobs from the provided tree-ish object. This allows the
command to also be used in bare repositories.
Since we use a tree-ish object, the user can pass "--source
HEAD:subdirectory" and all the attributes will be looked up as if
subdirectory was the root directory of the repository.
We cannot simply use the `<rev>:<path>` syntax without the `--source`
flag, similar to how it is used in `git show` because any non-flag
parameter before `--` is treated as an attribute and any parameter after
`--` is treated as a pathname.
The change involves creating a new function `read_attr_from_blob`, which
given the path reads the blob for the path against the provided source and
parses the attributes line by line. This function is plugged into
`read_attr()` function wherein we go through the stack of attributes
files.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Co-authored-by: toon@iotcl.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace non-existent `branch.<name>.fetch` to `remote.<repository>.fetch`, in
the first example in `git-fetch` doc, which was introduced in
d504f6975d (modernize fetch/merge/pull examples, 2009-10-21).
Rename placeholder `<name>` to `<repository>`, to be consistent with all other
uses in git docs, except that `git-config.txt` uses `remote.<name>.fetch` in
its "Variables" section.
Also add missing monospace markups.
Signed-off-by: Yukai Chou <muzimuzhi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, in the git-log documentation, the reference to generating
patches does not match the section title. This can make the section
"Generating patch text with -p" hard to find, since typically readers of
the documentation will copy and paste to search the page.
Let's make this more convenient for readers by linking it directly to
the section.
Since git-log pulls in diff-generate-patch.txt, we can provide a direct
link to the section. Otherwise, change the verbiage to match exactly
what the section title is, to at least make searching for it an easier
task.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d656218a83 (docs/bisect-lk2009: update nist report link,
2017-04-20) replaced a dead link to news release on nist.gov. However,
this might be confusing to the reader (like myself) because the article
git-bisect-lk2009.txt quotes from the news release but the exact quote
cannot be found in the full report. In addition to that, the link added
in 2017 is also dead in 2023.
Replace the reference to nist.gov with an version of the original NIST
news release archived to the Wayback Machine. Include also an updated
link to a live version of the full report.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A reference to Java Code Conventions in git-bisect-lk2009.txt uses an
outdated URL that redirects to table of contents for the conventions.
The actual claim about "80%" that this reference backs up is on the
first page of the conventions:
https://www.oracle.com/java/technologies/javase/codeconventions-introduction.html
Use this newer URL and its title in the reference.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like the file selection options we tweaked in the last commit, the
status tags printed with -t had descriptions that were easy to
misunderstand, and for many of the same reasons. Clarify them.
Also, while at it, remove the "semi-deprecated" comment for "git
ls-files -t". The -t option was marked as semi-deprecated in 5bc0e247c4
("Document ls-files -t as semi-obsolete.", 2010-07-28) because:
"git ls-files -t" is [...] badly documented, hence we point the
users to superior alternatives.
The feature is marked as "semi-obsolete" but not "scheduled for removal"
since it's a plumbing command, scripts might use it, and Git testsuite
already uses it to test the state of the index.
Marking it as obsolete because it was easily misunderstood, which I
think was primarily due to documentation problems, is one strategy, but
I think fixing the documentation is a better option. Especially since
in the intervening time, "git ls-files -t" has become heavily used by
sparse-checkout users where the same confusion just doesn't apply.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous descriptions of the file selection options were very easy
to misunderstand. For example:
* "Show cached files in the output"
This could be interpreted as meaning "show files which have been
modified and git-add'ed, i.e. files which have cached changes
relative to HEAD".
* "Show deleted files"
This could be interpreted as meaning "for each `git rm $FILE` we
ran, show me $FILE"
* "Show modified files"
This could be interpreted as meaning "show files which have been
modified and git-add'ed" or as "show me files that differ from HEAD"
or as "show me undeleted files different from HEAD" (given that
--deleted is a separate option), none of which are correct.
Further, it's not very clear when some options only modify and/or
override other options, as was the case with --ignored, --directory, and
--unmerged (I've seen folks confused by each of them on the mailing
list, sometimes even fellow git developers.)
Tweak these definitions, and the one for --killed, to try to make them
all a bit more clear. Finally, also clarify early on that duplicate
reports for paths are often expected (both when (a) there are multiple
entries for the file in the index -- i.e. when there are conflicts, and
also (b) when the user specifies options that might pick the same file
multiple times, such as `git ls-files --cached --deleted --modified`
when there is a file with an unstaged deletion).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files' --resolve-undo option has existed ever since 9d9a2f4aba
("resolve-undo: basic tests", 2009-12-25), but was never documented.
However, the option has been referred to in the ls-files manual itself
ever since ce74de931d ("ls-files: introduce "--format" option",
2022-07-23), making its omission a bit jarring. Document this option.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "DETACHED HEAD" section in the git-checkout doc, it suggests
using "git checkout -b <branch-name>" to create a new branch on the
detached head.
On the other hand, when you checkout a commit that is not at the tip of
any named branch (e.g., when you checkout a tag), git suggests using
"git switch -c <branch-name>".
Add "git switch -c" as another option and mitigate this inconsistency.
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'ORIG_HEAD' is written at the start of the rebase, but is not guaranteed
to still point to the original branch tip at the end of the rebase.
Indeed, using other commands that write 'ORIG_HEAD' during the rebase,
like splitting a commit using 'git reset HEAD^', will lead to 'ORIG_HEAD'
being overwritten. This causes confusion for some users [1].
Add a note about that in the 'Description' section, and mention the more
robust alternative of using the branch's reflog.
[1] https://lore.kernel.org/git/28ebf03b-e8bb-3769-556b-c9db17e43dbb@gmail.com/T/#m827179c5adcfb504d67f76d03c8e6942b55e5ed0
Reported-by: Erik Cervin Edin <erik@cervined.in>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When mentioning 'ORIG_HEAD', be explicit about which command write that
pseudo-ref, namely 'git am', 'git merge', 'git rebase' and 'git reset'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that 'git merge' writes 'ORIG_HEAD' before performing the merge
is missing from the documentation of the command.
Mention it in the 'Description' section.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that 'git reset' writes 'ORIG_HEAD' before changing HEAD is
mentioned in an example, but is missing from the 'Description' section.
Mention it in the discussion of the "'git reset' [<mode>] [<commit>]"
form of the command.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 67ac1e1d57 (cherry-pick/revert: add support for
-X/--strategy-option, 2010-12-10) added an example to the documentation
of 'git cherry-pick'. This example mentions how to abort a failed
cherry-pick and retry with an additional merge strategy option.
The command used in the example to abort the cherry-pick is 'git reset
--merge ORIG_HEAD', but cherry-pick does not write 'ORIG_HEAD' before
starting its operation. So this command would checkout a commit
unrelated to what was at HEAD when the user invoked cherry-pick.
Use 'git cherry-pick --abort' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in code comments which repeat various words. Most of the
cases are simple in that they repeat a word that usually cannot be
repeated in a grammatically correct sentence. Just remove the
incorrectly duplicated word in these cases and rewrap text, if needed.
A tricky case is usage of "that that", which is sometimes grammatically
correct. However, an instance of this in "t7527-builtin-fsmonitor.sh"
doesn't need two words "that", because there is only one daemon being
discussed, so replace the second "that" with "the".
Reword code comment "entries exist on on-disk index" in function
update_one in file cache-tree.c, by replacing incorrect preposition "on"
with "in".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent addition of the index.skipHash config option allows index
writes to speed up by skipping the hash computation for the trailing
checksum. This is particularly critical for repositories with many files
at HEAD, so add this config option to two cases where users in that
scenario may opt-in to such behavior:
1. The feature.manyFiles config option enables some options that are
helpful for repositories with many files at HEAD.
2. 'scalar register' and 'scalar reconfigure' set config options that
optimize for large repositories.
In both of these cases, set index.skipHash=true to gain this
speedup. Add tests that demonstrate the proper way that
index.skipHash=true can override feature.manyFiles=true.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change allowed skipping the hashing portion of the
hashwrite API, using it instead as a buffered write API. Disabling the
hashwrite can be particularly helpful when the write operation is in a
critical path.
One such critical path is the writing of the index. This operation is so
critical that the sparse index was created specifically to reduce the
size of the index to make these writes (and reads) faster.
This trade-off between file stability at rest and write-time performance
is not easy to balance. The index is an interesting case for a couple
reasons:
1. Writes block users. Writing the index takes place in many user-
blocking foreground operations. The speed improvement directly
impacts their use. Other file formats are typically written in the
background (commit-graph, multi-pack-index) or are super-critical to
correctness (pack-files).
2. Index files are short lived. It is rare that a user leaves an index
for a long time with many staged changes. Outside of staged changes,
the index can be completely destroyed and rewritten with minimal
impact to the user.
Following a similar approach to one used in the microsoft/git fork [1],
add a new config option (index.skipHash) that allows disabling this
hashing during the index write. The cost is that we can no longer
validate the contents for corruption-at-rest using the trailing hash.
[1] 21fed2d914
We load this config from the repository config given by istate->repo,
with a fallback to the_repository if it is not set.
While older Git versions will not recognize the null hash as a special
case, the file format itself is still being met in terms of its
structure. Using this null hash will still allow Git operations to
function across older versions.
The one exception is 'git fsck' which checks the hash of the index file.
This used to be a check on every index read, but was split out to just
the index in a33fc72fe9 (read-cache: force_verify_index_checksum,
2017-04-14) and released first in Git 2.13.0. Document the versions that
relaxed these restrictions, with the optimistic expectation that this
change will be included in Git 2.40.0.
Here, we disable this check if the trailing hash is all zeroes. We add a
warning to the config option that this may cause undesirable behavior
with older Git versions.
As a quick comparison, I tested 'git update-index --force-write' with
and without index.skipHash=true on a copy of the Linux kernel
repository.
Benchmark 1: with hash
Time (mean ± σ): 46.3 ms ± 13.8 ms [User: 34.3 ms, System: 11.9 ms]
Range (min … max): 34.3 ms … 79.1 ms 82 runs
Benchmark 2: without hash
Time (mean ± σ): 26.0 ms ± 7.9 ms [User: 11.8 ms, System: 14.2 ms]
Range (min … max): 16.3 ms … 42.0 ms 69 runs
Summary
'without hash' ran
1.78 ± 0.76 times faster than 'with hash'
These performance benefits are substantial enough to allow users the
ability to opt-in to this feature, even with the potential confusion
with older 'git fsck' versions.
Test this new config option, both at a command-line level and within a
submodule. The confirmation is currently limited to confirm that 'git
fsck' does not complain about the index. Future updates will make this
test more robust.
It is critical that this test is placed before the test_index_version
tests, since those tests obliterate the .git/config file and hence lose
the setting from GIT_TEST_DEFAULT_HASH, if set.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using "git --super-prefix" and narrow the scope of its use to
the submodule--helper.
* ab/no-more-git-global-super-prefix:
read-tree: add "--super-prefix" option, eliminate global
submodule--helper: convert "{update,clone}" to their own "--super-prefix"
submodule--helper: convert "status" to its own "--super-prefix"
submodule--helper: convert "sync" to its own "--super-prefix"
submodule--helper: convert "foreach" to its own "--super-prefix"
submodule--helper: don't use global --super-prefix in "absorbgitdirs"
submodule.c & submodule--helper: pass along "super_prefix" param
read-tree + fetch tests: test failing "--super-prefix" interaction
submodule absorbgitdirs tests: add missing "Migrating git..." tests
'cat-file' gains mailmap support for its '--batch-check' and '-s'
options.
* sa/cat-file-mailmap--batch-check:
cat-file: add mailmap support to --batch-check option
cat-file: add mailmap support to -s option
The git-am --no-verify flag is analogous to the same flag passed to
git-commit. It bypasses the pre-applypatch and applypatch-msg hooks
if they are enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to honor format.mboxrd even when sending
patches to the standard output stream,
* ew/format-patch-mboxrd:
format-patch: support format.mboxrd with --stdout
Bundle URIs part 4.
* ds/bundle-uri-4:
clone: unbundle the advertised bundles
bundle-uri: download bundles from an advertised list
bundle-uri: allow relative URLs in bundle lists
strbuf: introduce strbuf_strip_file_from_path()
bundle-uri: serve bundle.* keys from config
bundle-uri client: add helper for testing server
transport: rename got_remote_heads
bundle-uri client: add boolean transfer.bundleURI setting
clone: request the 'bundle-uri' command when available
t: create test harness for 'bundle-uri' command
protocol v2: add server-side "bundle-uri" skeleton
Just like "git var GIT_EDITOR" abstracts the complex logic to
choose which editor gets used behind it, "git var" now give support
to GIT_SEQUENCE_EDITOR.
* sa/git-var-sequence-editor:
var: add GIT_SEQUENCE_EDITOR variable
Update the description of --force to use '<start-point>' rather than
'<startpoint>' to match the spelling used everywhere else in the
git-branch documentation.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--super-prefix" option to "git" was initially added in [1] for
use with "ls-files"[2], and shortly thereafter "submodule--helper"[3]
and "grep"[4]. It wasn't until [5] that "read-tree" made use of it.
At the time [5] made sense, but since then we've made "ls-files"
recurse in-process in [6], "grep" in [7], and finally
"submodule--helper" in the preceding commits.
Let's also remove it from "read-tree", which allows us to remove the
option to "git" itself.
We can do this because the only remaining user of it is the submodule
API, which will now invoke "read-tree" with its new "--super-prefix"
option. It will only do so when the "submodule_move_head()" function
is called.
That "submodule_move_head()" function was then only invoked by
"read-tree" itself, but now rather than setting an environment
variable to pass "--super-prefix" between cmd_read_tree() we:
- Set a new "super_prefix" in "struct unpack_trees_options". The
"super_prefixed()" function in "unpack-trees.c" added in [5] will now
use this, rather than get_super_prefix() looking up the environment
variable we set earlier in the same process.
- Add the same field to the "struct checkout", which is only needed to
ferry the "super_prefix" in the "struct unpack_trees_options" all the
way down to the "entry.c" callers of "submodule_move_head()".
Those calls which used the super prefix all originated in
"cmd_read_tree()". The only other caller is the "unlink_entry()"
caller in "builtin/checkout.c", which now passes a "NULL".
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. e77aa336f1 (ls-files: optionally recurse into submodules, 2016-10-07)
3. 89c8626557 (submodule helper: support super prefix, 2016-12-08)
4. 0281e487fd (grep: optionally recurse into submodules, 2016-12-16)
5. 3d415425c7 (unpack-trees: support super-prefix option, 2017-01-17)
6. 188dce131f (ls-files: use repository object, 2017-06-22)
7. f9ee2fcdfa (grep: recurse in-process using 'struct repository', 2017-08-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mboxrd is a more robust output format when used with --stdout
and needs more exposure. Introducing this config knob lets
users choose the more robust format for all their --stdout
uses.
Relying on --pretty=mboxrd and including all of pretty-formats.txt
in the `git format-patch' documentation would likely be
confusing to users. Furthermore, this setting is useful across
multiple invocations. So introduce `format.mboxrd' as a boolean
configuration knob that changes the default --pretty=email format
to --pretty=mboxrd when (and only when) --stdout is in use.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The yet-to-be introduced client support for bundle-uri will always
fall back on a full clone, but we'd still like to be able to ignore a
server's bundle-uri advertisement entirely.
The new transfer.bundleURI config option defaults to 'false', but a user
can set it to 'true' to enable checking for bundle URIs from the origin
Git server using protocol v2.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a skeleton server-side implementation of a new "bundle-uri" command
to protocol v2. This will allow conforming clients to optionally seed
their initial clones or incremental fetches from URLs containing
"*.bundle" files created with "git bundle create".
This change only performs the basic boilerplate of advertising a new
protocol v2 capability. The new 'bundle-uri' capability allows a client
to request a list of bundles. Right now, the server only returns a flush
packet, which corresponds to an empty advertisement. The bundle.* config
namespace describes which key-value pairs will be communicated across
this interface in future updates.
The critical bit right now is that the new boolean
uploadPack.adverstiseBundleURIs config value signals whether or not this
capability should be advertised at all.
An earlier version of this patch [1] used a different transfer format
than the "key=value" pairs in the current implementation. The change was
made to unify the protocol v2 command with the bundle lists provided by
independent bundle servers. Further, the standard allows for the server
to advertise a URI that contains a bundle list. This allows users
automatically discovering bundle providers that are loosely associated
with the origin server, but without the origin server knowing exactly
which bundles are currently available.
[1] https://lore.kernel.org/git/RFC-patch-v2-01.13-2fc87ce092b-20220311T155841Z-avarab@gmail.com/
The very-deep headings needed to be modified to stop at level 4 due to
documentation build issues. These were not recognized in earlier builds
since the file was previously in the Documentation/technical/ directory
and was built in a different way. With its current location, the
heavily-nested details were causing build issues and they are now
replaced with a bulletted list of details.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `--batch-check` option does not
complain when `--use-mailmap` option is given, the latter option is
ignored. Compute the size of the object after replacing the idents and
report it instead.
In order to make `--batch-check` option honour the mailmap mechanism we
have to read the contents of the commit/tag object.
There were two ways to do it:
1. Make two calls to `oid_object_info_extended()`. If `--use-mailmap`
option is given, the first call will get us the type of the object
and second call will only be made if the object type is either a
commit or tag to get the contents of the object.
2. Make one call to `oid_object_info_extended()` to get the type of the
object. Then, if the object type is either of commit or tag, make a
call to `repo_read_object_file()` to read the contents of the object.
I benchmarked the following command with both the above approaches and
compared against the current implementation where `--use-mailmap`
option is ignored:
`git cat-file --use-mailmap --batch-all-objects --batch-check --buffer
--unordered`
The results can be summarized as follows:
Time (mean ± σ)
default 827.7 ms ± 104.8 ms
first approach 6.197 s ± 0.093 s
second approach 1.975 s ± 0.217 s
Since, the second approach is faster than the first one, I implemented
it in this patch.
The command git cat-file can now use the mailmap mechanism to replace
idents with canonical versions for commit and tag objects. There are
several options like `--batch`, `--batch-check` and `--batch-command`
that can be combined with `--use-mailmap`. But the documentation for
`--batch`, `--batch-check` and `--batch-command` doesn't say so. This
patch fixes that documentation.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `-s` option does not complain when
`--use-mailmap` option is given, the latter option is ignored. Compute
the size of the object after replacing the idents and report it instead.
In order to make `-s` option honour the mailmap mechanism we have to
read the contents of the commit/tag object. Make use of the call to
`oid_object_info_extended()` to get the contents of the object and store
in `buf`. `buf` is later freed in the function.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advice message given by "git status" when it takes long time to
enumerate untracked paths has been updated.
* rr/status-untracked-advice:
status: modernize git-status "slow untracked files" advice
The editor program used by Git when editing the sequencer "todo" file
is determined by examining a few environment variables and also
affected by configuration variables. Introduce "git var
GIT_SEQUENCE_EDITOR" to give users access to the final result of the
logic without having to know the exact details.
This is very similar in spirit to 44fcb497 (Teach git var about
GIT_EDITOR, 2009-11-11) that introduced "git var GIT_EDITOR".
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git var UNKNOWN_VARIABLE" and "git var VARIABLE" with the variable
given an empty value used to behave identically. Now the latter
just gives an empty output, while the former still gives an error
message.
* sa/git-var-empty:
var: allow GIT_EDITOR to return null
var: do not print usage() with a correct invocation
"merge-tree" learns a new `--merge-base` option.
* kz/merge-tree-merge-base:
docs: fix description of the `--merge-base` option
merge-tree.c: allow specifying the merge-base when --stdin is passed
merge-tree.c: add --merge-base=<commit> option
`git status` can be slow when there are a large number of
untracked files and directories since Git must search the entire
worktree to enumerate them. When it is too slow, Git prints
advice with the elapsed search time and a suggestion to disable
the search using the `-uno` option. This suggestion also carries
a warning that might scare off some users.
However, these days, `-uno` isn't the only option. Git can reduce
the time taken to enumerate untracked files by caching results from
previous `git status` invocations, when the `core.untrackedCache`
and `core.fsmonitor` features are enabled.
Update the `git status` man page to explain these configuration
options, and update the advice to provide more detail about the
current configuration and to refer to the updated documentation.
Signed-off-by: Rudy Rigot <rudy.rigot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A GNU make pattern rule with multiple targets has always meant that
a single invocation of the recipe will build all the targets.
However in older versions of GNU make a recipe that did not really
build all the targets would be tolerated.
Starting with GNU make 4.4 this behavior is deprecated and pattern
rules are expected to generate files to match all the patterns.
If not all targets are created then GNU make will not consider any
target up to date and will re-run the recipe when it is run again.
Modify Documentation/Makefile to split the man page-creating pattern
rule into a separate pattern rule for each pattern.
Reported-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Paul Smith <psmith@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, git-var could print usage() even if the command was invoked
correctly with a variable defined in git_vars -- provided that its
read() function returned NULL.
Now, we only print usage() only if it was called with a logical
variable that wasn't defined -- regardless of read().
Since we now know the variable is valid when we call read_var(), we
can avoid printing usage() here (and exiting with code 129) and
instead exit quietly with code 1. While exiting with a different code
can be a breaking change, it's far better than changing the exit
status more generally from 'failure' to 'success'.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" used to use all the local refs as the boundary for
checking connectivity of the data "git push" sent, but now it uses
only the refs that it advertised to the pusher. In a repository with
the .hideRefs configuration, this reduces the resources needed to
perform the check.
cf. <221028.86bkpw805n.gmgdl@evledraar.gmail.com>
cf. <xmqqr0yrizqm.fsf@gitster.g>
* ps/receive-use-only-advertised:
receive-pack: only use visible refs for connectivity check
rev-parse: add `--exclude-hidden=` option
revision: add new parameter to exclude hidden refs
revision: introduce struct to handle exclusions
revision: move together exclusion-related functions
refs: get rid of global list of hidden refs
refs: fix memory leak when parsing hideRefs config
A pair of bugfixes to the Documentation/howto/maintain-git.txt guide.
* tb/howto-maintain-git-fixes:
Documentation: build redo-seen.sh from jch..seen
Documentation: build redo-jch.sh from master..jch
'git maintenance register' is taught to write configuration to an
arbitrary path, and 'git for-each-repo' is taught to expand tilde
characters in paths.
* rp/maintenance-qol:
builtin/gc.c: fix use-after-free in maintenance_unregister()
maintenance --unregister: fix uninit'd data use & -Wdeclaration-after-statement
maintenance: add option to register in a specific config
for-each-repo: interpolate repo path arguments
Update the credential-cache documentation to provide a more realistic
example.
* mh/increase-credential-cache-timeout:
Documentation: increase example cache timeout to 1 hour
"git repack" learns to send cruft objects out of the way into
packfiles outside the repository.
* tb/repack-expire-to:
builtin/repack.c: implement `--expire-to` for storing pruned objects
builtin/repack.c: write cruft packs to arbitrary locations
builtin/repack.c: pass "cruft_expiration" to `write_cruft_pack`
builtin/repack.c: pass "out" to `prepare_pack_objects`
Add a new `--exclude-hidden=` option that is similar to the one we just
added to git-rev-list(1). Given a section name `uploadpack` or `receive`
as argument, it causes us to exclude all references that would be hidden
by the respective `$section.hideRefs` configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Users can optionally hide refs from remote users in git-upload-pack(1),
git-receive-pack(1) and others via the `transfer.hideRefs`, but there is
not an easy way to obtain the list of all visible or hidden refs right
now. We'll require just that though for a performance improvement in our
connectivity check.
Add a new option `--exclude-hidden=` that excludes any hidden refs from
the next pseudo-ref like `--all` or `--branches`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
maintenance register currently records the maintenance repo exclusively
within the user's global configuration, but other configuration files
may be relevant when running maintenance if they are included from the
global config. This option allows the user to choose where maintenance
repos are recorded.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Previously the docs only described storage helpers.
A concrete example: Git Credential Manager can generate credentials
for GitHub and GitLab via OAuth.
https://github.com/GitCredentialManager/git-credential-manager
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Git learned pushing submodules without pushing the superproject by
the user specifying --recurse-submodules=only through 6c656c3fe4
("submodules: add RECURSE_SUBMODULES_ONLY value", 2016-12-20) and
225e8bf778 ("push: add option to push only submodules", 2016-12-20).
For users who use this feature regularly, it is desirable to have an
equivalent configuration.
It turns out that such a configuration (push.recurseSubmodules=only) is
already supported, even though it is neither documented nor mentioned
in the commit messages, due to the way the --recurse-submodules=only
feature was implemented (a function used to parse --recurse-submodules
was updated to support "only", but that same function is used to parse
push.recurseSubmodules too). What is left is to document it and test it,
which is what this commit does.
There is a possible point of confusion when recursing into a submodule
that itself has the push.recurseSubmodules=only configuration, because
if a repository has only its submodules pushed and not itself, its
superproject can never be pushed. Therefore, treat such configurations
as being "on-demand", and print a warning message.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
It was previously unclear how unrecognised attributes are handled.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The previous commit added a `--merge-base` option in order to allow
using a specified merge-base for the merge. Extend the input accepted
by `--stdin` to also allow a specified merge-base with each merge
requested. For example:
printf "<b3> -- <b1> <b2>" | git merge-tree --stdin
does a merge of b1 and b2, and uses b3 as the merge-base.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This patch will give our callers more flexibility to use `git merge-tree`,
such as:
git merge-tree --write-tree --merge-base=branch^ HEAD branch
This does a merge of HEAD and branch, but uses branch^ as the merge-base.
And the reason why using an option flag instead of a positional argument
is to allow additional commits passed to merge-tree to be handled via an
octopus merge in the future.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Remotes are considered "promisor" if extensions.partialClone and some
other configuration variables are set. The casing for this in
Documentation/technical/repository-version.txt is not proper and may
cause confusion. This change corrects this casing.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Previously, the example *decreased* the cache timeout compared to the
default, making it less user friendly.
Instead, nudge users to make cache more usable. Many users choose
store over cache.
https://lore.kernel.org/git/CAGJzqskRYN49SeS8kSEN5-vbB_Jt1QvAV9QhS6zNuKh0u8wxPQ@mail.gmail.com/
The default timeout remains 15 minutes. A stronger nudge would
be to increase that.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The glossary entries for "commit-graph file" and "reachability
bitmap" have been added.
* po/glossary-around-traversal:
glossary: add reachability bitmap description
glossary: add "commit graph" description
doc: use 'object database' not ODB or abbreviation
doc: use "commit-graph" hyphenation consistently
Enable gc.cruftpacks by default for those who opt into
feature.experimental setting.
* es/mark-gc-cruft-as-experimental:
config: let feature.experimental imply gc.cruftPacks=true
gc: add tests for --cruft and friends
Git asks for a "password", but the user might use a
personal access token or OAuth access token instead.
Example:
Password for 'https://AzureDiamond@github.com':
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Once upon a time, Matheus wrote some patches to make
git grep [--cached | <REVISION>] ...
restrict its output to the sparsity specification when working in a
sparse checkout[1]. That effort got derailed by two things:
(1) The --sparse-index work just beginning which we wanted to avoid
creating conflicts for
(2) Never deciding on flag and config names and planned high level
behavior for all commands.
More recently, Shaoxuan implemented a more limited form of Matheus'
patches that only affected --cached, using a different flag name,
but also changing the default behavior in line with what Matheus did.
This again highlighted the fact that we never decided on command line
flag names, config option names, and the big picture path forward.
The --sparse-index work has been mostly complete (or at least released
into production even if some small edges remain) for quite some time
now. We have also had several discussions on flag and config names,
though we never came to solid conclusions. Stolee once upon a time
suggested putting all these into some document in
Documentation/technical[3], which Victoria recently also requested[4].
I'm behind the times, but here's a patch attempting to finally do that.
[1] https://lore.kernel.org/git/5f3f7ac77039d41d1692ceae4b0c5df3bb45b74a.1612901326.git.matheus.bernardino@usp.br/
(See his second link in that email in particular)
[2] https://lore.kernel.org/git/20220908001854.206789-2-shaoxuan.yuan02@gmail.com/
[3] https://lore.kernel.org/git/CABPp-BHwNoVnooqDFPAsZxBT9aR5Dwk5D9sDRCvYSb8akxAJgA@mail.gmail.com/
(Scroll to the very end for the final few paragraphs)
[4] https://lore.kernel.org/git/cafcedba-96a2-cb85-d593-ef47c8c8397c@github.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a similar spirit as the previous commit, the 'seen' branch gets
rebuilt by reintegrating topics between 'jch' and the (old) tip of
'seen'.
Update the instructions on how to generate Meta/redo-seen.sh for the
first time to reflect this.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Rebuilding the 'jch' branch begins by reintegrating any topics between
'master' and 'jch', not 'master' and 'seen'.
In the maintainer guide, the documentation isn't quite right, since the
initial input to Meta/Reintegrate is "master..seen", not "master..jch".
This can lead to confusing results when generating the Meta/redo-jch.sh
script for the first time.
Additionally, rebuilding 'jch' takes place in two steps. First, running
the script up to the first "### match next" cut-line, and then comparing
the result with what's on 'next' (i.e. with "git diff jch next"). Then,
the remaining set of topics get merged down to 'jch' (which aren't on
'next') by running the entire "redo-jch.sh" script.
Clarify the documentation to reflect this.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git merge-tree --stdin" is a new way to request a series of merges
and report the merge results.
* en/merge-tree-sequence:
merge-tree: support multiple batched merges with --stdin
merge-tree: update documentation for differences in -z output
Define the logical elements of a "bundle list", data structure to
store them in-core, format to transfer them, and code to parse
them.
* ds/bundle-uri-3:
bundle-uri: suppress stderr from remote-https
bundle-uri: quiet failed unbundlings
bundle: add flags to verify_bundle()
bundle-uri: fetch a list of bundles
bundle: properly clear all revision flags
bundle-uri: limit recursion depth for bundle lists
bundle-uri: parse bundle list in config format
bundle-uri: unit test "key=value" parsing
bundle-uri: create "key=value" line parsing
bundle-uri: create base key-value pair parsing
bundle-uri: create bundle_list struct and helpers
bundle-uri: use plain string in find_temp_filename()
The role the security mailing list plays in an embargoed release
has been documented.
* jr/embargoed-releases-doc:
embargoed releases: also describe the git-security list and the process
"git rebase --keep-base" used to discard the commits that are
already cherry-picked to the upstream, even when "keep-base" meant
that the base, on top of which the history is being rebuilt, does
not yet include these cherry-picked commits. The --keep-base
option now implies --reapply-cherry-picks and --no-fork-point
options.
* pw/rebase-keep-base-fixes:
rebase --keep-base: imply --no-fork-point
rebase --keep-base: imply --reapply-cherry-picks
rebase: factor out branch_base calculation
rebase: rename merge_base to branch_base
rebase: store orig_head as a commit
rebase: be stricter when reading state files containing oids
t3416: set $EDITOR in subshell
t3416: tighten two tests
Two new facilities, "timer" and "counter", are introduced to the
trace2 API.
* jh/trace2-timers-and-counters:
trace2: add global counter mechanism
trace2: add stopwatch timers
trace2: convert ctx.thread_name from strbuf to pointer
trace2: improve thread-name documentation in the thread-context
trace2: rename the thread_name argument to trace2_thread_start
api-trace2.txt: elminate section describing the public trace2 API
tr2tls: clarify TLS terminology
trace2: use size_t alloc,nr_open_regions in tr2tls_thread_ctx
"git shortlog" learned to group by the "format" string.
* tb/shortlog-group:
shortlog: implement `--group=committer` in terms of `--group=<format>`
shortlog: implement `--group=author` in terms of `--group=<format>`
shortlog: extract `shortlog_finish_setup()`
shortlog: support arbitrary commit format `--group`s
shortlog: extract `--group` fragment for translation
shortlog: make trailer insertion a noop when appropriate
shortlog: accept `--date`-related options
