Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f8 (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass a callback to read_tree_recursive(), but not every callback
needs every parameter. Let's mark the unused ones to satisfy
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
* vd/sparse-reset-checkout-fixes:
unpack-trees: unpack new trees as sparse directories
cache.h: create 'index_name_pos_sparse()'
oneway_diff: handle removed sparse directories
checkout: fix nested sparse directory diff in sparse index
Add the 'recursive' diff flag to the local changes reporting done by 'git
checkout' in 'show_local_changes()'. Without the flag enabled, unexpanded
sparse directories will not be recursed into to report the diff of each
file's contents, resulting in the reported local changes including
"modified" sparse directories.
The same issue was found and fixed for 'git status' in 2c521b0e49 (status:
fix nested sparse directory diff in sparse index, 2022-03-01)
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" miscounted the paths it updated, which has been
corrected.
source: <cover.1657799213.git.matheus.bernardino@usp.br>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
At the end of `git checkout <pathspec>`, we get a message informing how
many entries were updated in the working tree. However, this number can
be inaccurate for two reasons:
1) Delayed entries currently get counted twice.
2) Failed entries are included in the count.
The first problem happens because the counter is first incremented
before inserting the entry in the delayed checkout queue, and once again
when finish_delayed_checkout() calls checkout_entry(). And the second
happens because the counter is incremented too early in
checkout_entry(), before the entry was in fact checked out. Fix that by
moving the count increment further down in the call stack and removing
the duplicate increment on delayed entries. Note that we have to keep
a per-entry reference for the counter (both on parallel checkout and
delayed checkout) because not all entries are always accumulated at the
same counter. See checkout_worktree(), at builtin/checkout.c for an
example.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1c41d2805e (unpack_trees_options: free messages when done,
2018-05-21) we started calling clear_unpack_trees_porcelain() on this
codepath, but missed this error path.
We could call clear_unpack_trees_porcelain() just before we error()
and return when unmerged_cache() fails, but the more correct fix is to
not have the unmerged_cache() check happen in the middle of our
"topts" setup.
Before 23cbf11b5c (merge-recursive: porcelain messages for checkout,
2010-08-11) we would not malloc() to setup our "topts", which is when
this started to leak on the error path.
Before that this code wasn't conflating the setup of "topts" and the
unmerged_cache() call in any meaningful way. The initial version in
782c2d65c2 (Build in checkout, 2008-02-07) just does a "memset" of
it, and initializes a single struct member.
Then in 8ccba008ee (unpack-trees: allow Porcelain to give different
error messages, 2008-05-17) we added the initialization of the error
message, which as noted above finally started leaking in 23cbf11b5c.
Let's fix the memory leak, and avoid future issues by initializing the
"topts" with a helper function. There are no functional changes here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
Add a release_revisions() to various users of "struct rev_list" in
those straightforward cases where we only need to add the
release_revisions() call to the end of a block, and don't need to
e.g. refactor anything to use a "goto cleanup" pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The users of the revision.[ch] API's "struct rev_info" are a major
source of memory leaks in the test suite under SANITIZE=leak, which in
turn adds a lot of noise when trying to mark up tests with
"TEST_PASSES_SANITIZE_LEAK=true".
The users of that API are largely one-shot, e.g. "git rev-list" or
"git log", or the "git checkout" and "git stash" being modified here
For these callers freeing the memory is arguably a waste of time, but
in many cases they've actually been trying to free the memory, and
just doing that in a buggy manner.
Let's provide a release_revisions() function for these users, and
start migrating them over per the plan outlined in [1]. Right now this
only handles the "pending" member of the struct, but more will be
added in subsequent commits.
Even though we only clear the "pending" member now, let's not leave a
trap in code like the pre-image of index_differs_from(), where we'd
start doing the wrong thing as soon as the release_revisions() learned
to clear its "diffopt". I.e. we need to call release_revisions() after
we've inspected any state in "struct rev_info".
This leaves in place e.g. clear_pathspec(&rev.prune_data) in
stash_working_tree() in builtin/stash.c, subsequent commits will teach
release_revisions() to free "prune_data" and other members that in
some cases are individually cleared by users of "struct rev_info" by
reaching into its members. Those subsequent commits will remove the
relevant calls to e.g. clear_pathspec().
We avoid amending code in index_differs_from() in diff-lib.c as well
as wt_status_collect_changes_index(), has_unstaged_changes() and
has_uncommitted_changes() in wt-status.c in a way that assumes that we
are already clearing the "diffopt" member. That will be handled in a
subsequent commit.
1. https://lore.kernel.org/git/87a6k8daeu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
Check the return value from parse_tree_indirect() to turn segfaults
into calls to die().
* gc/parse-tree-indirect-errors:
checkout, clone: die if tree cannot be parsed
When a tree oid is invalid, parse_tree_indirect() can return NULL. Check
for NULL instead of proceeding as though it were a valid pointer and
segfaulting.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users who are accustomed to doing `git checkout <tag>` assume that
`git switch <tag>` will do the same thing. Inform them of the --detach
option so they aren't left wondering why `git switch` doesn't work but
`git checkout` does.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the write_object_file() function to take an "enum object_type"
instead of a "const char *type". Its callers either passed
{commit,tree,blob,tag}_type and can pass the corresponding OBJ_* type
instead, or were hardcoding strings like "blob".
This avoids the back & forth fragility where the callers of
write_object_file() would have the enum type, and convert it
themselves via type_name(). We do have to now do that conversion
ourselves before calling write_object_file_prepare(), but those
codepaths will be similarly adjusted in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a dry_run parameter to create_branch() such that dry_run = 1 will
validate a new branch without trying to create it. This will be used in
`git branch --recurse-submodules` to ensure that the new branch can be
created in all submodules.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=2042920
Reported-by: Petr Šplíchal <psplicha@redhat.com>
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
source: <3de40324bea6a1dd9bca2654721471e3809e87d8.1642538935.git.steadmon@google.com>
source: <c3c26192-aee9-185a-e559-b8735139e49c@web.de>
* js/branch-track-inherit:
branch,checkout: fix --track documentation
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
* js/branch-track-inherit:
branch,checkout: fix --track usage strings
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
[1]: https://lore.kernel.org/git/220111.86a6g3yqf9.gmgdl@evledraar.gmail.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library, except in the case of
builtin/worktree.c. That special-case will be handled in a subsequent
commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are all replaced by "the option '%s' requires '%s'", which is a
new string but replaces 17 previous unique strings.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use static strings for constant parts of the sentences. They are all
turned into "cannot be used together".
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Zealous diff3" style of merge conflict presentation has been added.
* en/zdiff3:
update documentation for new zdiff3 conflictStyle
xdiff: implement a zealous diff3, or "zdiff3"
There is only one caller, builtin/checkout.c, and it hardcodes
force_create=1.
This argument was introduced in abd0cd3a30 (refs: new public ref function:
safe_create_reflog, 2015-07-21), which promised to immediately use it in a
follow-on commit, but that never happened.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "checkout" command is one of the main sources of leaks in the test
suite, let's fix the common ones by not leaking from the "struct
branch_info".
Doing this is rather straightforward, albeit verbose, we need to
xstrdup() constant strings going into the struct, and free() the ones
we clobber as we go along.
This also means that we can delete previous partial leak fixes in this
area, i.e. the "path_to_free" accounting added by 96ec7b1e70 (Convert
resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13).
There was some discussion about whether "we should retain the "const
char *" here and cast at free() time, or have it be a "char *". Since
this is not a public API with any sort of API boundary let's use
"char *", as is already being done for the "refname" member of the
same struct.
The tests to mark as passing were found with:
rm .prove; GIT_SKIP_TESTS=t0027 prove -j8 --state=save t[0-9]*.sh :: --immediate
# apply & compile this change
prove -j8 --state=failed :: --immediate
I.e. the ones that were newly passing when the --state=failed command
was run. I left out "t3040-subprojects-basic.sh" and
"t4131-apply-fake-ancestor.sh" to to optimization-level related
differences similar to the ones noted in[1], except that these would
be something the current 'linux-leaks' job would run into.
1. https://lore.kernel.org/git/cover-v3-0.6-00000000000-20211022T175227Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, unpack_trees_options->reset was used to signal that it
was okay to delete any untracked files in the way. This was used by
`git read-tree --reset`, but then started appearing in other places as
well. However, many of the other uses should not be deleting untracked
files in the way. Change this value to an enum so that a value of 1
(i.e. "true") can be split into two:
UNPACK_RESET_PROTECT_UNTRACKED,
UNPACK_RESET_OVERWRITE_UNTRACKED
In order to catch accidental misuses (i.e. where folks call it the way
they traditionally used to), define the special enum value of
UNPACK_RESET_INVALID = 1
which will trigger a BUG().
Modify existing callers so that
read-tree --reset
reset --hard
checkout --force
continue using the UNPACK_RESET_OVERWRITE_UNTRACKED logic, while other
callers, including
am
checkout without --force
stash (though currently dead code; reset always had a value of 0)
numerous callers from rebase/sequencer to reset_head()
will use the new UNPACK_RESET_PROTECT_UNTRACKED value.
Also, note that it has been reported that 'git checkout <treeish>
<pathspec>' currently also allows overwriting untracked files[1]. That
case should also be fixed, but it does not use unpack_trees() and thus
is outside the scope of the current changes.
[1] https://lore.kernel.org/git/15dad590-087e-5a48-9238-5d2826950506@gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
