Originally, moving from-in-to-out may leave an empty <source>
directory on-disk (this kind of directory is marked as
WORKING_DIRECTORY).
Cleanup such directories if they are empty (don't have any entries
under them).
Modify two tests that take <source> as WORKING_DIRECTORY to test
this behavior.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving an in-cone <source> to an out-of-cone <destination>
was not possible, mainly because such <destination> is a directory that
is not present in the working tree.
Change the behavior so that we can move an in-cone <source> to
out-of-cone <destination> when --sparse is supplied.
Notice that <destination> can also be an out-of-cone file path, rather
than a directory.
Such <source> can be either clean or dirty, and moving it results in
different behaviors:
A clean move should move <source> to <destination> in the index (do
*not* create <destination> in the worktree), then delete <source> from
the worktree.
A dirty move should move the <source> to the <destination>, both in the
working tree and the index, but should *not* remove the resulted path
from the working tree and should *not* turn on its CE_SKIP_WORKTREE bit.
Optional reading
================
We are strict about cone mode when <destination> is a file path.
The reason is that some of the previous tests that use no-cone mode in
t7002 are keep breaking, mainly because the `dst_mode = SPARSE;` line
added in this patch.
Most features developed in both "from-out-to-in" and "from-in-to-out"
only care about cone mode situation, as no-cone mode is becoming
irrelevant. And because assigning `SPARSE` to `dst_mode` when the
repo is in no-cone mode causes miscellaneous bugs, we should just leave
this new functionality to be exclusive cone mode and save some time.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add corresponding tests to test that user can move an in-cone <source>
to out-of-cone <destination> when --sparse is supplied.
Such <source> can be either clean or dirty, and moving it results in
different behaviors:
A clean move should move <source> to <destination> in the index (do
*not* create <destination> in the worktree), then delete <source> from
the worktree.
A dirty move should move the <source> to the <destination>, both in the
working tree and the index, but should *not* remove the resulted path
from the working tree and should *not* turn on its CE_SKIP_WORKTREE bit.
Also make sure that if <destination> exists in the index (existing
check for if <destination> is in the worktree is not enough in
in-to-out moves), warn user against the overwrite. And Git should force
the overwrite when supplied with -f or --force.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the sparse index within the `git-rm` command.
The `p2000` tests demonstrate a ~92% execution time reduction for
'git rm' using a sparse index.
Test HEAD~1 HEAD
--------------------------------------------------------------------------
2000.74: git rm ... (full-v3) 0.41(0.37+0.05) 0.43(0.36+0.07) +4.9%
2000.75: git rm ... (full-v4) 0.38(0.34+0.05) 0.39(0.35+0.05) +2.6%
2000.76: git rm ... (sparse-v3) 0.57(0.56+0.01) 0.05(0.05+0.00) -91.2%
2000.77: git rm ... (sparse-v4) 0.57(0.55+0.02) 0.03(0.03+0.00) -94.7%
----
Also, normalize a behavioral difference of `git-rm` under sparse-index.
See related discussion [1].
`git-rm` a sparse-directory entry within a sparse-index enabled repo
behaves differently from a sparse directory within a sparse-checkout
enabled repo.
For example, in a sparse-index repo, where 'folder1' is a
sparse-directory entry, `git rm -r --sparse folder1` provides this:
rm 'folder1/'
Whereas in a sparse-checkout repo *without* sparse-index, doing so
provides this:
rm 'folder1/0/0/0'
rm 'folder1/0/1'
rm 'folder1/a'
Because `git rm` a sparse-directory entry does not need to expand the
index, therefore we should accept the current behavior, which is faster
than "expand the sparse-directory entry to match the sparse-checkout
situation".
Modify a previous test so such difference is not considered as an error.
[1] https://github.com/ffyuanda/git/pull/6#discussion_r934861398
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `ensure_full_index()` method so `git-rm` does not always
expand the index when the expansion is unnecessary, i.e. when
<pathspec> does not have any possibilities to match anything outside
of sparse-checkout definition.
Expand the index when the <pathspec> needs an expanded index, i.e. the
<pathspec> contains wildcard that may need a full-index or the
<pathspec> is simply outside of sparse-checkout definition.
Notice that the test 'rm pathspec expands index when necessary' in
t1092 *is* testing this code change behavior, though it will be marked
as 'test_expect_success' only in the next patch, where we officially
mark `command_requires_full_index = 0`, so the index does not expand
unless we tell it to do so.
Notice that because we also want `ensure_full_index` to record the
stdout and stderr from Git command, a corresponding modification
is also included in this patch. The reason we want the "sparse-index-out"
and "sparse-index-err", is that we need to make sure there is no error
from Git command itself, so we can rely on the `test_region` result
and determine if the index is expanded or not.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for `git-rm`, make sure it behaves as expected when
<pathspec> is both inside or outside of sparse-checkout definition.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'unpack_single_entry()' is unpacking a new directory tree (that is, one
not already present in the index) into a sparse index, unpack the tree as a
sparse directory rather than traversing its contents and unpacking each file
individually. This helps keep the sparse index as collapsed as possible in
cases such as 'git reset --hard' restoring a outside-of-cone directory
removed with 'git rm -r --sparse'.
Without this patch, 'unpack_single_entry()' will only unpack a directory
into the index as a sparse directory (rather than traversing into it and
unpacking its files one-by-one) if an entry with the same name already
exists in the index. This patch allows sparse directory unpacking without a
matching index entry when the following conditions are met:
1. the directory's path is outside the sparse cone, and
2. there are no children of the directory in the index
If a directory meets these requirements (as determined by
'is_new_sparse_dir()'), 'unpack_single_entry()' unpacks the sparse directory
index entry and propagates the decision back up to 'unpack_callback()' to
prevent unnecessary tree traversal into the unpacked directory.
Reported-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'recursive' diff flag to the local changes reporting done by 'git
checkout' in 'show_local_changes()'. Without the flag enabled, unexpanded
sparse directories will not be recursed into to report the diff of each
file's contents, resulting in the reported local changes including
"modified" sparse directories.
The same issue was found and fixed for 'git status' in 2c521b0e49 (status:
fix nested sparse directory diff in sparse index, 2022-03-01)
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests assumed that core.fsyncMethod=batch is supported
everywhere, which broke FreeBSD.
* js/t5351-freebsd-fix:
t5351: avoid using `test_cmp` for binary data
t5351: avoid relying on `core.fsyncMethod = batch` to be supported
Operating modes like "--batch" of "git cat-file" command learned to
take NUL-terminated input, instead of one-item-per-line.
* tb/cat-file-z:
builtin/cat-file.c: support NUL-delimited input with `-z`
t1006: extract --batch-command inputs to variables
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
source: <pull.1285.v2.git.1658002423864.gitgitgadget@gmail.com>
* mb/config-document-include:
config.txt: document include, includeIf
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
source: <YsdyLS4UFzj0j/wB@coredump.intra.peff.net>
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
This reverts commit 96eaffebbf (maintenance: set
log.excludeDecoration durin prefetch, 2021-01-19).
The previous change created a default decoration filter that does not
include refs/prefetch/, so this modification of the config is no longer
needed.
One issue that can happen from this point on is that users who ran the
prefetch task on previous versions of Git will still have a
log.excludeDecoration value and that will prevent the new default
decoration filter from being active. Thus, when we add the refs/bundle/
namespace as part of the bundle URI feature, those users will see
refs/bundle/ decorations.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the --clear-decorations option for users
who do not want their decorations limited to a narrow set of ref
namespaces.
Add a config option that is equivalent to specifying --clear-decorations
by default.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous changes introduced a new default ref filter for decorations
in the 'git log' command. This can be overridden using
--decorate-refs=HEAD and --decorate-refs=refs/, but that is cumbersome
for users.
Instead, add a --clear-decorations option that resets all previous
filters to a blank filter that accepts all refs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user runs 'git log', they expect a certain set of helpful
decorations. This includes:
* The HEAD ref
* Branches (refs/heads/)
* Stashes (refs/stash)
* Tags (refs/tags/)
* Remote branches (refs/remotes/)
* Replace refs (refs/replace/ or $GIT_REPLACE_REF_BASE)
Each of these namespaces was selected due to existing test cases that
verify these namespaces appear in the decorations. In particular,
stashes and replace refs can have custom colors from the
color.decorate.<slot> config option.
While one test checks for a decoration from notes, it only applies to
the tip of refs/notes/commit (or its configured ref name). Notes form
their own kind of decoration instead. Modify the expected output for the
tests in t4013 that expect this note decoration. There are several
tests throughout the codebase that verify that --decorate-refs,
--decorate-refs-exclude, and log.excludeDecoration work as designed and
the tests continue to pass without intervention.
However, there are other refs that are less helpful to show as
decoration:
* Prefetch refs (refs/prefetch/)
* Rebase refs (refs/rebase-merge/ and refs/rebase-apply/)
* Bundle refs (refs/bundle/) [!]
[!] The bundle refs are part of a parallel series that bootstraps a repo
from a bundle file, storing the bundle's refs into the repo's
refs/bundle/ namespace.
In the case of prefetch refs, 96eaffebbf (maintenance: set
log.excludeDecoration durin prefetch, 2021-01-19) added logic to add
refs/prefetch/ to the log.excludeDecoration config option. Additional
feedback pointed out that having such a side-effect can be confusing and
perhaps not helpful to users. Instead, we should hide these ref
namespaces that are being used by Git for internal reasons but are not
helpful for the users to see.
The way to provide a seamless user experience without setting the config
is to modify the default decoration filters to match our expectation of
what refs the user actually wants to see.
In builtin/log.c, after parsing the --decorate-refs and
--decorate-refs-exclude options from the command-line, call
set_default_decoration_filter(). This method populates the exclusions
from log.excludeDecoration, then checks if the list of pattern
modifications are empty. If none are specified, then the default set is
restricted to the set of inclusions mentioned earlier (HEAD, branches,
etc.). A previous change introduced the ref_namespaces array, which
includes all of these currently-used namespaces. The 'decoration' value
is non-zero when that namespace is associated with a special coloring
and fits into the list of "expected" decorations as described above,
which makes the implementation of this filter very simple.
Note that the logic in ref_filter_match() in log-tree.c follows this
matching pattern:
1. If there are exclusion patterns and the ref matches one, then ignore
the decoration.
2. If there are inclusion patterns and the ref matches one, then
definitely include the decoration.
3. If there are config-based exclusions from log.excludeDecoration and
the ref matches one, then ignore the decoration.
With this logic in mind, we need to ensure that we do not populate our
new defaults if any of these filters are manually set. Specifically, if
a user runs
git -c log.excludeDecoration=HEAD log
then we expect the HEAD decoration to not appear. If we left the default
inclusions in the set, then HEAD would match that inclusion before
reaching the config-based exclusions.
A potential alternative would be to check the list of default inclusions
at the end, after the config-based exclusions. This would still create a
behavior change for some uses of --decorate-refs-exclude=<X>, and could
be overwritten somewhat with --decorate-refs=refs/ and
--decorate-refs=HEAD. However, it no longer becomes possible to include
refs outside of the defaults while also excluding some using
log.excludeDecoration.
Another alternative would be to exclude the known namespaces that are
not intended to be shown. This would reduce the visible effect of the
change for expert users who use their own custom ref namespaces. The
implementation change would be very simple to swap due to our use of
ref_namespaces:
int i;
struct string_list *exclude = decoration_filter->exclude_ref_pattern;
/*
* No command-line or config options were given, so
* populate with sensible defaults.
*/
for (i = 0; i < NAMESPACE__COUNT; i++) {
if (ref_namespaces[i].decoration)
continue;
string_list_append(exclude, ref_namespaces[i].ref);
}
The main downside of this approach is that we expect to add new hidden
namespaces in the future, and that means that Git versions will be less
stable in how they behave as those namespaces are added.
It is critical that we provide ways for expert users to disable this
behavior change via command-line options and config keys. These changes
will be implemented in a future change.
Add a test that checks that the defaults are not added when
--decorate-refs is specified. We verify this by showing that HEAD is not
included as it normally would. Also add a test that shows that the
default filter avoids the unwanted decorations from refs/prefetch,
refs/rebase-merge,
and refs/bundle.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The color.decorate.<slot> config option added the 'grafted' slot in
09c4ba410b (log-tree: allow to customize 'grafted' color, 2018-05-26)
but included no tests for this behavior. When modifying some logic
around decorations, this ref namespace was ignored and could have been
lost as a default namespace for 'git log' decorations by default.
Add two tests to t4207 that check that the replaced objects are
correctly decorated. Use "black" as the color since it is distinct from
the other colors already in the test. The first test uses regular
replace-objects while the second creates a commit graft.
Be sure to test both modes with GIT_REPLACE_REF_BASE unset and set to an
alternative base.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before adding new tests to t4207-log-decoration-colors.sh, update the
existing test to use modern test conventions. This includes:
1. Use lowercase in test names.
2. Keep all test setup inside the test_expect_success blocks. We need
to be careful about left whitespace in the broken lines of the input
file.
3. Do not use 'git' commands on the left side of a pipe.
4. Create a cmp_filtered_decorations helper to perform the 'log', 'sed',
and test_decode_color manipulations. Move the '--all' option to be an
argument so we can change that value in future tests.
5. Modify the 'sed' command to use a simpler form that is more
portable.
The next change will introduce new tests usinge these new conventions.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The normalize_glob_ref() method was introduced in 65516f586b (log:
add option to choose which refs to decorate, 2017-11-21) to help with
decoration filters such as --decorate-refs=<filter> and
--decorate-refs-exclude=<filter>. The method has not been used anywhere
else.
At the moment, it is impossible to specify HEAD as a decoration filter
since normalize_glob_ref() prepends "refs/" to the filter if it isn't
already there.
Allow adding HEAD as a decoration filter by allowing the exact string
"HEAD" to not be prepended with "refs/". Add a test in t4202-log.sh that
would previously fail since the HEAD decoration would exist in the
output.
It is sufficient to only cover "HEAD" here and not include other special
refs like REBASE_HEAD. This is because HEAD is the only ref outside of
refs/* that is added to the list of decorations. However, we may want to
special-case these other refs in normalize_glob_ref() in the future.
Leave a NEEDSWORK comment for now.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a logic error in a082345372 (hook API: fix v2.36.0 regression:
hooks should be connected to a TTY, 2022-06-07). When it started using
the "ungroup" API added in fd3aaf53f7 (run-command: add an "ungroup"
option to run_process_parallel(), 2022-06-07) it should have made the
same sort of change that fd3aaf53f7 itself made in
"t/helper/test-run-command.c".
The correct way to emit this "Couldn't start" output with "ungroup"
would be:
fprintf(stderr, _("Couldn't start hook '%s'\n"), hook_path);
But we should instead remove the emitting of this output. As the added
test shows we already emit output when we can't run the child. The
"cannot run" output here is emitted by run-command.c's
child_err_spew().
So the addition of the "Couldn't start hook" output here in
96e7225b31 (hook: add 'run' subcommand, 2021-12-22) was always
redundant. For the pre-commit hook we'll now emit exactly the same
output as we did before f443246b9f (commit: convert
{pre-commit,prepare-commit-msg} hook to hook.h, 2021-12-22) (and
likewise for others).
We could at this point add this to the pick_next_hook() callbacks in
hook.c:
assert(!out);
assert(!*pp_task_cb);
And this to notify_start_failure() and notify_hook_finished() (in the
latter case the parameter is called "pp_task_cp"):
assert(!out);
assert(!pp_task_cb);
But let's leave any such instrumentation for some eventual cleanup of
the "ungroup" API.
Reported-by: Ilya K <me@0upti.me>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the move of existing Documentation/technical/* protocol and
file-format documentation into our main documentation space. By moving
the things that discuss the protocol we can properly link from
e.g. lsrefs.unborn and protocol.version documentation to a manpage we
build by default.
So far we have been using the "gitformat-" prefix for the
documentation we've been moving over from Documentation/technical/*,
but for protocol documentation let's use "gitprotocol-*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new "File formats, protocols and other developer interfaces"
section in the main "git help git" manual page and start moving the
documentation that now lives in "Documentation/technical/*.git" over
to it. This complements the newly added and adjacent "Repository,
command and file interfaces" section.
This makes the technical documentation more accessible and
discoverable. Before this we wouldn't install it by default, and had
no ability to build man page versions of them. The links to them from
our existing documentation link to the generated HTML version of these
docs.
So let's start moving those over, starting with just the
"bundle-format.txt" documentation added in 7378ec90e1 (doc: describe
Git bundle format, 2020-02-07). We'll now have a new
gitformat-bundle(5) man page. Subsequent commits will move more git
internal format documentation over.
Unfortunately the syntax of the current Documentation/technical/*.txt
is not the same (when it comes to section headings etc.) as our
Documentation/*.txt documentation, so change the relevant bits of
syntax as we're moving this over.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new "Repository, command and file interfaces" section in the
main "git help git" manual page. Move things that belong under this
new criteria from the generic "Guides" section.
The "Guides" section was added in f442f28a81 (git.txt: add list of
guides, 2020-08-05). It makes sense to have e.g. "giteveryday(7)" and
"gitfaq(7)" listed under "Guides".
But placing e.g. "gitignore(5)" in it is stretching the meaning of
what a "guide" is, ideally that section should list things similar to
"giteveryday(7)" and "gitcore-tutorial(7)".
An alternate name that was considered for this new section was "User
formats", for consistency with the nomenclature used for man section 5
in general. My man(1) lists it as "File formats and conventions,
e.g. /etc/passwd".
So calling this "git help --formats" or "git help --user-formats"
would make sense for e.g. gitignore(5), but would be stretching it
somewhat for githooks(5), and would seem really suspect for the likes
of gitcli(7).
Let's instead pick a name that's closer to the generic term "User
interface", which is really what this documentation discusses: General
user-interface documentation that doesn't obviously belong elsewhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to merge in a superproject with conflicting submodule
pointers that cannot be fast-forwarded or trivially resolved, the merge
fails and Git prints an error message that accurately describes the
failure, but does not provide steps for the user to resolve the error.
Git is left in a conflicted state, which requires the user to:
1. merge submodules or update submodules to an already existing
commit that reflects the merge
2. add submodules changes to the superproject
3. finish merging superproject
These steps are non-obvious for newer submodule users to figure out
based on the error message and neither `git submodule status` nor `git
status` provide any useful pointers.
Update error message to provide steps to resolve submodule merge
conflict. Future work could involve adding an advice flag to the
message. Although the message is long, it also has the id of the
submodule commit that needs to be merged, which could be useful
information for the user.
Additionally, 5 merge failures that resulted in an early return have
been updated to reflect the status of the merge.
1. Null merge base (null o): CONFLICT_SUBMODULE_NULL_MERGE_BASE added
as a new conflict type and will print updated error message.
2. Null merge side a (null a): BUG(). See [1] for discussion
3. Null merge side b (null b): BUG(). See [1] for discussion
4. Submodule not checked out: added NEEDSWORK bit
5. Submodule commits not present: added NEEDSWORK bit
The errors with a NEEDSWORK bit deserve a more detailed explanation of
how to resolve them. See [2] for more context.
[1] https://lore.kernel.org/git/CABPp-BE0qGwUy80dmVszkJQ+tcpfLRW0OZyErymzhZ9+HWY1mw@mail.gmail.com/
[2] https://lore.kernel.org/git/xmqqpmhjjwo9.fsf@gitster.g/
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
131b94a10a ("test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_
on glibc >= 2.34", 2022-03-04) introduced a check for the version of
glibc that is in use. This check is performed as part of
setup_malloc_check() which is called at least once for each test. As
the test involves forking `getconf` and `expr` cache the result and
use that within setup_malloc_check() to avoid forking these extra
processes for each test.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git merge" finds that it cannot perform a merge, it should
restore the working tree to the state before the command was
initiated, but in some corner cases it didn't.
* en/merge-restore-to-pristine:
merge: do not exit restore_state() prematurely
merge: ensure we can actually restore pre-merge state
merge: make restore_state() restore staged state too
merge: fix save_state() to work when there are stat-dirty files
merge: do not abort early if one strategy fails to handle the merge
merge: abort if index does not match HEAD for trivial merges
merge-resolve: abort if index does not match HEAD
merge-ort-wrappers: make printed message match the one from recursive
Make our mergesort implementation type-safe.
* rs/mergesort:
mergesort: remove llist_mergesort()
packfile: use DEFINE_LIST_SORT
fetch-pack: use DEFINE_LIST_SORT
commit: use DEFINE_LIST_SORT
blame: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT_DEBUG
mergesort: add macros for typed sort of linked lists
mergesort: tighten merge loop
mergesort: unify ranks loops
"git cat-file" learned an option to use the mailmap when showing
commit and tag objects.
* sa/cat-file-mailmap:
cat-file: add mailmap support
ident: rename commit_rewrite_person() to apply_mailmap_to_header()
ident: move commit_rewrite_person() to ident.c
revision: improve commit_rewrite_person()
There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
* tb/commit-graph-genv2-upgrade-fix:
commit-graph: fix corrupt upgrade from generation v1 to v2
commit-graph: introduce `repo_find_commit_pos_in_graph()`
t5318: demonstrate commit-graph generation v2 corruption
Fix for a bug that makes write-tree to fail to write out a
non-existent index as a tree, introduced in 2.37.
* tk/untracked-cache-with-uall:
read-cache: make `do_read_index()` always set up `istate->repo`
Add a "free_removed_argv_elements" member to "struct
setup_revision_opt", and use it to fix several memory leaks.
We have various memory leaks in APIs that take and munge "const
char **argv", e.g. parse_options(). Sometimes these APIs are given the
"argv" we get to the "main" function, in which case we don't leak
memory, but other times we're giving it the "v" member of a "struct
strvec" we created.
There's several potential ways to fix those sort of leaks, we could
add a "nodup" mode to "struct strvec", which would work for the cases
where we push constant strings to it. But that wouldn't work as soon
as we used strvec_pushf(), or otherwise needed to duplicate or create
a string for that "struct strvec".
Let's instead make it the responsibility of the revisions API. If it's
going to clobber elements of argv it can also free() them, which it
will now do if instructed to do so via "free_removed_argv_elements".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in 5d7eeee2ac (git-show: grok blobs,
trees and tags, too, 2006-12-14). As we iterate over a "<revision>..."
command-line and encounter ad OBJ_COMMIT we want to use our "struct
rev_info", but with a "pending" array of one element: the one commit
we're showing in the loop.
To do this 5d7eeee2ac saved away a pointer to rev.pending.objects and
rev.pending.nr for its iteration. We'd then clobber those (and alloc)
when we needed to show an OBJ_COMMIT.
We'd therefore leak the "rev.pending" we started out with, and only
free the new "rev.pending" in the "OBJ_COMMIT" case arm as
prepare_revision_walk() would draw it down.
Let's fix this memory leak. Now when we encounter an OBJ_COMMIT we
save away the "rev.pending" before clearing it. We then add a single
commit to it, which our indirect invocation of prepare_revision_walk()
will remove. After that we restore the "rev.pending".
Our "rev.pending" will then get free'd by the release_revisions()
added in f6bfea0ad0 (revisions API users: use release_revisions() in
builtin/log.c, 2022-04-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in 0139c58ab9 (revisions API users: add "goto cleanup" for
release_revisions(), 2022-04-13), in that commit a release_revisions()
call was added to this function, but it never did anything due to this
TODO memset() added in fe1a21d526 (fast-rebase: demonstrate
merge-ort's API via new test-tool command, 2020-10-29).
Simply removing the memset() will fix the "cmdline" which can be seen
when running t5520-pull.sh.
This sort of thing could be detected automatically with a rule similar
to the unused.cocci merged in 7fa60d2a5b6 (Merge branch
'ab/cocci-unused' into next, 2022-07-11). The following rule on top
would catch the case being fixed here:
@@
type T;
identifier I;
identifier REL1 =~ "^[a-z_]*_(release|reset|clear|free)$";
identifier REL2 =~ "^(release|clear|free)_[a-z_]*$";
@@
- memset(\( I \| &I \), 0, ...);
... when != \( I \| &I \)
(
\( REL1 \| REL2 \)( \( I \| &I \), ...);
|
\( REL1 \| REL2 \)( \( &I \| I \) );
)
... when != \( I \| &I \)
That rule should arguably use only &I, not I (as we might be passed a
pointer). The distinction would matter if anyone cared about the
side-effects of a memset() followed by release() of a pointer to a
variable passed into the function.
As such a pattern would be at best very confusing, and most likely
point to buggy code as in this case, the above rule is probably fine
as-is.
But as this rule only found one such bug in the entire codebase let's
not add it to contrib/coccinelle/unused.cocci for now, we can always
dig it up in the future if it's deemed useful.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can feed absolute garbage to symbolic-ref as a target like:
git symbolic-ref HEAD refs/heads/foo..bar
While this doesn't technically break the repo entirely (our "is it a git
directory" detector looks only for "refs/" at the start), we would never
resolve such a ref, as the ".." is invalid within a refname.
Let's flag these as invalid at creation time to help the caller realize
that what they're asking for is bogus.
A few notes:
- We use REFNAME_ALLOW_ONELEVEL here, which lets:
git update-ref refs/heads/foo FETCH_HEAD
continue to work. It's unclear whether anybody wants to do something
so odd, but it does work now, so this is erring on the conservative
side. There's a test to make sure we didn't accidentally break this,
but don't take that test as an endorsement that it's a good idea, or
something we might not change in the future.
- The test in t4202-log.sh checks how we handle such an invalid ref on
the reading side, so it has to be updated to touch the HEAD file
directly.
- We need to keep our HEAD-specific check for "does it start with
refs/". The ALLOW_ONELEVEL flag means we won't be enforcing that for
other refs, but HEAD is special here because of the checks in
validate_headref().
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" miscounted the paths it updated, which has been
corrected.
source: <cover.1657799213.git.matheus.bernardino@usp.br>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
"git rebase -i" learns to update branches whose tip appear in the
rebased range with "--update-refs" option.
source: <pull.1247.v5.git.1658255624.gitgitgadget@gmail.com>
* ds/rebase-update-ref:
sequencer: notify user of --update-refs activity
sequencer: ignore HEAD ref under --update-refs
rebase: add rebase.updateRefs config option
sequencer: rewrite update-refs as user edits todo list
rebase: update refs from 'update-ref' commands
rebase: add --update-refs option
sequencer: add update-ref command
sequencer: define array with enum values
rebase-interactive: update 'merge' description
branch: consider refs under 'update-refs'
t2407: test branches currently using apply backend
t2407: test bisect and rebase as black-boxes
The `test_cmp` function is meant to provide nicer output than `cmp` when
expected and actual output of Git commands disagree. The implicit
assumption is that the output is line-based and human readable.
However, aaf81223f4 (unpack-objects: use stream_loose_object() to
unpack large objects, 2022-06-11) introduced a call that compares the
contents of pack files, which are distinctly not line-based nor human
readable.
This causes problems because on Windows, we hand off to the Bash
function `mingw_test_cmp` that compares the lines while ignoring line
ending differences. And this Bash function spends an insane amount of
cycles trying to read in that binary pack file, so that it is almost
indistinguishable from an infinite loop.
For example, t5351 took 1486 seconds in the CI run at
https://github.com/git/git/runs/7398490747?check_suite_focus=true#step:5:171,
to complete. And yes, that is almost half an hour.
Since Git's tests already use `cmp` consistently when comparing pack
files, let's change this instance to use `cmp` instead of `test_cmp`,
too, and fix that performance problem.
Now t5351 takes all of 22 seconds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On FreeBSD, this mode is not supported. But since 3a251bac0d (trace2:
only include "fsync" events if we git_fsync(), 2022-07-18) t5351 will
fail if this mode is unsupported.
Let's address this in the minimal fashion, by detecting that that mode
is unsupported and expecting a different count of hardware flushes in
that case.
This fixes the CI/PR builds on FreeBSD again.
Note: A better way would be to test only what is relevant in t5351.6
"unpack big object in stream (core.fsyncmethod=batch)" again instead of
blindly comparing the output against some exact text. But that would
pretty much revert the idea of above-mentioned commit, and that commit
was _just_ accepted into Git's main branch so one must assume that it
was intentional.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been reported by some versions of "gcc" since
"output_state" became malloc'd in 55a9651d26 (upload-pack.c: increase
output buffer size, 2021-12-14).
In e75d2f7f73 (revisions API: have release_revisions() release
"filter", 2022-04-13) it was correctly marked as leak-free, the only
path through this function that doesn't reach the free(output_state)
is if we "goto fail", and that will invoke "die()".
Such leaks are not included with SANITIZE=leak (but e.g. valgrind will
still report them), but under some gcc optimization (I have not been
able to reproduce it with "clang") we'll report a leak here
anyway. E.g. gcc v12 with "-O2" and above will trigger it, but not
clang v13 with any "-On".
The GitHub CI would also run into this leak if the "linux-leaks" job
was made to run with "GIT_TEST_SANITIZE_LEAK_LOG=true".
See [1] for a past case where gcc had similar trouble analyzing leaks
involving a die() invocation in the function.
1. https://lore.kernel.org/git/patch-v3-5.6-9a44204c4c9-20211022T175227Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark those remaining tests that pass when run under SANITIZE=leak with
TEST_PASSES_SANITIZE_LEAK=true, these were either omitted in
f346fcb62a (Merge branch 'ab/mark-leak-free-tests-even-more',
2021-12-15) and 5a4f8381b6 (Merge branch 'ab/mark-leak-free-tests',
2021-10-25), or have had their memory leaks fixed since then.
With this change there's now a a one-to-one mapping between those
tests that we have opted-in via "TEST_PASSES_SANITIZE_LEAK=true", and
those that pass with the new "check" mode:
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
make test SANITIZE=leak
Note that the "GIT_TEST_SANITIZE_LEAK_LOG=true" is needed due to the
edge cases noted in a preceding commit, i.e. in some cases we'd pass
the test itself, but still have outstanding leaks due to ignored exit
codes.
The "GIT_TEST_SANITIZE_LEAK_LOG=true" corrects for that, we're only
marking those tests as passing that really don't have any leaks,
whether that was reflected in their exit code or not.
Note that the change here to "t9100-git-svn-basic.sh" is marking that
test as passing under SANITIZE=leak, we're removing a
"TEST_FAILS_SANITIZE_LEAK=true" line, not
"TEST_PASSES_SANITIZE_LEAK=true". See 7a98d9ab00 (revisions API: have
release_revisions() release "cmdline", 2022-04-13) for the
introduction of that t/lib-git-svn.sh-specific variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '!SANITIZE_LEAK' prerequisite added in 956d2e4639 (tests: add a
test mode for SANITIZE=leak, run it in CI, 2021-09-23) has been used
in various tests to skip individual tests in otherwise leak-free
tests.
Let's change the cases that have become leak-free since then to run
under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in previous on-list discussions[1] we have various tests that
will falsely report being leak-free because we're missing the relevant
exit code from LSAN as summarized below.
We should fix those issues, but in the meantime and as an additional
sanity check we can and should consider our own ASAN logs before
reporting that a test is leak-free.
Before this compiling with SANITIZE=leak and running:
./t6407-merge-binary.sh
Will exit successfully, now we'll get an error and an informative
message on:
GIT_TEST_SANITIZE_LEAK_LOG=true ./t6407-merge-binary.sh
Even better, as noted in the updated t/README we'll now error out when
combined with the "check" mode:
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
./t4058-diff-duplicates.sh
Why do we miss these leaks? Because:
* We have leaks inside "test_expect_failure" blocks, which by design
will not distinguish a "normal" failure from an abort() or
segfault. See [1] for a discussion of it shortcomings.
* We have "git" invocations outside of "test_expect_success",
e.g. setup code in the main body of the test, or in test helper
functions that don't use &&-chaining.
* Our tests will otherwise catch segfaults and abort(), but if we
invoke a command that invokes another command it needs to ferry the
exit code up to us.
Notably a command that e.g. might invoke "git pack-objects" might
itself exit with status 128 if that "pack-objects" segfaults or
abort()'s. If the test invoking the parent command(s) is using
"test_must_fail" we'll consider it an expected "ok" failure.
* run-command.c doesn't (but probably should) ferry up such exit
codes, so for e.g. "git push" tests where we expect a failure and an
underlying "git" command fails we won't ferry up the segfault or
abort exit code.
* We have gitweb.perl and some other perl code ignoring return values
from close(), i.e. ignoring exit codes from "git rev-parse" et al.
* We have in-tree shellscripts like "git-merge-one-file.sh" invoking
git commands, they'll usually return their own exit codes on "git"
failure, rather then ferrying up segfault or abort() exit code.
E.g. these invocations in git-merge-one-file.sh leak, but aren't
reflected in the "git merge" exit code:
src1=$(git unpack-file $2)
src2=$(git unpack-file $3)
That case would be easily "fixed" by adding a line like this after
each assignment:
test $? -ne 0 && exit $?
But we'd then in e.g. "t6407-merge-binary.sh" run into
write_tree_trivial() in "builtin/merge.c" calling die() instead of
ferrying up the relevant exit code.
Let's remove "TEST_PASSES_SANITIZE_LEAK=true" from tests we
were falsely marking as leak-free.
In the case of t6407-merge-binary.sh it was marked as leak-free in
9081a421a6 (checkout: fix "branch info" memory leaks,
2021-11-16). I'd previously removed other bad
"TEST_PASSES_SANITIZE_LEAK=true" opt-ins in the series merged in
ea05fd5fbf (Merge branch 'ab/keep-git-exit-codes-in-tests',
2022-03-16). The case of t1060-object-corruption.sh is more subtle,
and will be discussed in a subsequent commit.
1. https://lore.kernel.org/git/cover-0.7-00000000000-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "GIT_TEST_PASSING_SANITIZE_LEAK=check" mode to the
test-lib.sh.
As noted in the updated "t/README" this compliments the existing
"GIT_TEST_PASSING_SANITIZE_LEAK=true" mode added in
956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23).
Rather than document this all in one (even more) dense paragraph split
up the discussion of how it combines with --immediate into its own
paragraph following the discussion of
"GIT_TEST_SANITIZE_LEAK_LOG=true".
Before the removal of "test_external" in a preceding commit we would
have had to special-case t9700-perl-git.sh and t0202-gettext-perl.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "test_external" function added in [1]. This arguably makes
the output of t9700-perl-git.sh and friends worse. But as we'll argue
below the trade-off is worth it, since "chaining" to another TAP
emitter in test-lib.sh is more trouble than it's worth.
The new output of t9700-perl-git.sh is now:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
ok 2 - use t9700/test.pl to test Git.pm
# passed all 2 test(s)
1..2
Whereas before this change it would be:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
# run 1: Perl API (perl /home/avar/g/git/t/t9700/test.pl)
ok 2 - use Git;
[... omitting tests 3..46 from t/t9700/test.pl ...]
ok 47 - unquote escape sequences
1..47
# test_external test Perl API was ok
# test_external_without_stderr test no stderr: Perl API was ok
At the time of its addition supporting "test_external" was easy, but
when test-lib.sh itself started to emit TAP in [2] we needed to make
everything surrounding the emission of the plan consider
"test_external". I added that support in [2] so that we could run:
prove ./t9700-perl-git.sh :: -v
But since then in [3] the door has been closed on combining
$HARNESS_ACTIVE and -v, we'll now just die:
$ prove ./t9700-perl-git.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
So the only use of this has been that *if* we had failure in one of
these tests we could e.g. in CI see which test failed based on the
test number. Now we'll need to look at the full verbose logs to get
that same information.
I think this trade-off is acceptable given the reduction in
complexity, and it brings these tests in line with other similar
tests, e.g. the reftable tests added in [4] will be condensed down to
just one test, which invokes the C helper:
$ ./t0032-reftable-unittest.sh
ok 1 - unittests
# passed all 1 test(s)
1..1
It would still be nice to have that ":: -v" form work again, it
never *really* worked, but even though we've had edge cases test
output screwing up the TAP it mostly worked between d998bd4ab6 and
[3], so we may have been overzealous in forbidding it outright.
I have local patches which I'm planning to submit sooner than later
that get us to that goal, and in a way that isn't buggy. In the
meantime getting rid of this special case makes hacking on this area
of test-lib.sh easier, as we'll do in subsequent commits.
The switch from "perl" to "$PERL_PATH" here is because "perl" is
defined as a shell function in the test suite, see a5bf824f3b (t:
prevent '-x' tracing from interfering with test helpers' stderr,
2018-02-25). On e.g. the OSX CI the "command perl"... will be part of
the emitted stderr.
1. fb32c41008 (t/test-lib.sh: add test_external and
test_external_without_stderr, 2008-06-19)
2. d998bd4ab6 (test-lib: Make the test_external_* functions
TAP-aware, 2010-06-24)
3. 614fe01521 (test-lib: bail out when "-v" used under
"prove", 2016-10-22)
4. ef8a6c6268 (reftable: utility functions, 2021-10-07)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the original "perl -MTest::More" prerequisite check was added in
[1] it's been copy/pasted in [2], [3] and [4]. As we'll be changing
these codepaths in a subsequent commit let's consolidate these.
While we're at it let's move these to a lazy prereq, and make them
conform to our usual coding style (e.g. "\nthen", not "; then").
1. e46f9c8161 (t9700: skip when Test::More is not available,
2008-06-29)
2. 5e9637c629 (i18n: add infrastructure for translating Git with
gettext, 2011-11-18)
3. 8d314d7afe (send-email: reduce dependencies impact on
parse_address_line, 2015-07-07)
4. f07eeed123 (git-credential-netrc: adapt to test framework for git,
2018-05-12)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "make test" is run with the default of "DEFAULT_TEST_TARGET=test"
we'll leave the "test-results" directory in-place, but don't do so for
the "prove" target.
The reason for this is that when 28d836c815 (test: allow running the
tests under "prove", 2010-10-14) allowed for running the tests under
"prove" there was no point in leaving the "test-results" in place.
The "prove" target provides its own summary, so we don't need to run
"aggregate-results", which is the reason we have "test-results" in the
first place. See 2d84e9fb6d (Modify test-lib.sh to output stats to
t/test-results/*, 2008-06-08).
But in a subsequent commit test-lib.sh will start emitting reports of
memory leaks in test-results/*, and it will be useful to analyze these
after the fact.
This wouldn't be a problem as failing tests will halt the removal of
the files (we'll never reach "clean-except-prove-cache" from the
"prove" target), but will be subsequently as we'll want to report a
successful run, but might still have e.g. logs of known memory leaks
in test-results/*.
So let's stop removing this, it's sufficient that "make clean" removes
it, and that "pre-clean" (which both "test" and "prove" depend on)
will remove it, i.e. we'll never have a stale "test-results" because
of this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to run the test suite under a new
"GIT_TEST_SANITIZE_LEAK_LOG=true" mode, when true we'll log the leaks
we find an a new "test-results/<test-name>.leak" directory.
That new path is consistent with the existing
"test-results/<test-name>.<type>" results, except that those are all
files, not directories.
We also set "log_exe_name=1" to include the name of the executable in
the filename. This gives us files like "trace.git.<pid>" instead of
the default of "trace.<pid>". I.e. we'll be able to distinguish "git"
leaks from "test-tool", "git-daemon" etc.
We then set "dedup_token_length" to non-zero ("0" is the default) to
succinctly log a token we can de-duplicate these stacktraces on. The
string is simply a one-line stack-trace with only function names up to
N frames, which we limit at "9999" as a shorthand for
"infinite" (there appears to be no way to say "no limit").
With these combined we can now easily get e.g. the top 10 leaks in the
test suite grouped by full stacktrace:
grep -o -P -h '(?<=DEDUP_TOKEN: ).*' test-results/*.leak/trace.git.* | sort | uniq -c | sort -nr | head -n 10
Or add "grep -E -o '[^-]+'" to that to group by functions instead of
stack traces:
grep -o -P -h '(?<=DEDUP_TOKEN: ).*' test-results/*.leak/trace.git.* | grep -E -o '[^-]+' | sort | uniq -c | sort -nr | head -n 20
This new mode requires git to be compiled with SANITIZE=leak, rather
than explaining that in the documentation let's make it
self-documenting by bailing out if the user asks for this without git
having been compiled with SANITIZE=leak, as we do with
GIT_TEST_PASSING_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the documentation added in 956d2e4639 (tests: add a test mode
for SANITIZE=leak, run it in CI, 2021-09-23) for brevity.
The comment added in the same commit was also misleading: We skip
certain tests if SANITIZE=leak and GIT_TEST_PASSING_SANITIZE_LEAK=true,
not if we're compiled with SANITIZE=leak. Let's just remove the
comment, the control flow here is obvious enough that the code can
speak for itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to have those tests that fail return 0, and those
tests that succeed return 1. This is useful e.g. to run "--stress"
tests on tests that fail 99% of the time on some setup, i.e. to smoke
out the flaky run which yielded success.
In a subsequent commit a new SANITIZE=leak mode will make use of this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various "exit 1" checks that happened after our "die" handler
had been set up to use BAIL_OUT instead. See 234383cd40 (test-lib.sh:
use "Bail out!" syntax on bad SANITIZE=leak use, 2021-10-14) for the
benefits of the BAIL_OUT function.
The previous use of "error" here was not a logic error, but the "exit"
without "GIT_EXIT_OK" would emit the "FATAL: Unexpected exit with code
$code" message on top of the error we wanted to emit.
Since we'd also like to stop "prove" in its tracks here, the right
thing to do is to emit a "Bail out!" message.
Let's also move the "GIT_EXIT_OK=t" assignments to just above the
"exit [01]" in "test_done". It's not OK if we exit in
e.g. finalize_test_output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the control flow in test_done so that we'll set GIT_EXIT_OK=t
after we call test_atexit_handler(). This seems to have been a mistake
in 900721e15c (test-lib: introduce 'test_atexit', 2019-03-13). It
doesn't make sense to allow our "atexit" handling to call "exit"
without us emitting the errors we'll emit without GIT_EXIT_OK=t being
set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that these two functions never take N arguments, they'll only
ever receive one. They've needlessly used $@ over $1 since
41ac414ea2 (Sane use of test_expect_failure, 2008-02-01).
In the future we might want to pass the test source to these, but now
that's not the case. This preparatory change helps to clarify a
follow-up change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
source: <cover-v2-0.3-00000000000-20220630T101646Z-avarab@gmail.com>
* ab/test-quoting-fix:
config tests: fix harmless but broken "rm -r" cleanup
test-lib.sh: fix prepend_var() quoting issue
tests: add missing double quotes to included library paths
In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
source: <20220616234433.225-1-gg.oss@outlook.com>
source: <20220616231956.154-1-gg.oss@outlook.com>
* gg/worktree-from-the-above:
dir: minor refactoring / clean-up
dir: traverse into repository
Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
source: <pull.1268.v4.git.1656984823.gitgitgadget@gmail.com>
* en/merge-dual-dir-renames-fix:
merge-ort: fix issue with dual rename and add/add conflict
merge-ort: shuffle the computation and cleanup of potential collisions
merge-ort: make a separate function for freeing struct collisions
merge-ort: small cleanups of check_for_directory_rename
t6423: add tests of dual directory rename plus add/add conflict
A fix for a regression in test framework.
source: <pull.1288.git.1657789234416.gitgitgadget@gmail.com>
* js/ci-github-workflow-markup:
tests: fix incorrect --write-junit-xml code
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
* mb/config-document-include:
config.txt: document include, includeIf
Omit fsync-related trace2 entries when their values are all zero.
* ab/squelch-empty-fsync-traces:
trace2: only include "fsync" events if we git_fsync()
Add a new option "--format" that outputs index entries
informations in a custom format, taking inspiration
from the option with the same name in the `git ls-tree`
command.
"--format" cannot used with "-s", "-o", "-k", "-t",
" --resolve-undo","--deduplicate" and "--eol".
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if the user:
* Had no local changes before starting the merge
* A merge strategy makes changes to the working tree/index but returns
with exit status 2
Then we'd call restore_state() to clean up the changes and either let
the next merge strategy run (if there is one), or exit telling the user
that no merge strategy could handle the merge. Unfortunately,
restore_state() did not clean up the changes as expected; that function
was a no-op if the stash was a null, and the stash would be null if
there were no local changes before starting the merge. So, instead of
"Rewinding the tree to pristine..." as the code claimed, restore_state()
would leave garbage around in the index and working tree (possibly
including conflicts) for either the next merge strategy or for the user
after aborting the merge. And in the case of aborting the merge, the
user would be unable to run "git merge --abort" to get rid of the
unintended leftover conflicts, because the merge control files were not
written as it was presumed that we had restored to a clean state
already.
Fix the main problem by making sure that restore_state() only skips the
stash application if the stash is null rather than skipping the whole
function.
However, there is a secondary problem -- since merge.c forks
subprocesses to do the cleanup, the in-memory index is left out-of-sync.
While there was a refresh_cache(REFRESH_QUIET) call that attempted to
correct that, that function would not handle cases where the previous
merge strategy added conflicted entries. We need to drop the index and
re-read it to handle such cases.
(Alternatively, we could stop forking subprocesses and instead call some
appropriate function to do the work which would update the in-memory
index automatically. For now, just do the simple fix.)
Also, add a testcase checking this, one for which the octopus strategy
fails on the first commit it attempts to merge, and thus which it
cannot handle at all and must completely bail on (as per the "exit 2"
code path of commit 98efc8f3d8 ("octopus: allow manual resolve on the
last round.", 2006-01-13)).
Reported-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are multiple issues at play here:
1) If `git merge` is invoked with staged changes, it should abort
without doing any merging, and the user's working tree and index
should be the same as before merge was invoked.
2) Merge strategies are responsible for enforcing the index == HEAD
requirement. (See 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17) for some history
around this.)
3) Merge strategies can bail saying they are not an appropriate
handler for the merge in question (possibly allowing other
strategies to be used instead).
4) Merge strategies can make changes to the index and working tree,
and have no expectation to clean up after themselves, *even* if
they bail out and say they are not an appropriate handler for
the merge in question. (The `octopus` merge strategy does this,
for example.)
5) Because of (3) and (4), builtin/merge.c stashes state before
trying merge strategies and restores it afterward.
Unfortunately, if users had staged changes before calling `git merge`,
builtin/merge.c could do the following:
* stash the changes, in order to clean up after the strategies
* try all the merge strategies in turn, each of which report they
cannot function due to the index not matching HEAD
* restore the changes via "git stash apply"
But that last step would have the net effect of unstaging the user's
changes. Fix this by adding the "--index" option to "git stash apply".
While at it, also squelch the stash apply output; we already report
"Rewinding the tree to pristine..." and don't need a detailed `git
status` report afterwards. Also while at it, switch to using strvec
so folks don't have to count the arguments to ensure we avoided an
off-by-one error, and so it's easier to add additional arguments to
the command.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are stat-dirty files, but no files are modified,
`git stash create` exits with unsuccessful status. This causes merge
to fail. Copy some code from sequencer.c's create_autostash to refresh
the index first to avoid this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge is setup to allow multiple strategies to be specified,
and it will find the "best" result and use it. This is defeated if
some of the merge strategies abort early when they cannot handle the
merge. Fix the logic that calls recursive and ort to not do such an
early abort, but instead return "2" or "unhandled" so that the next
strategy can try to handle the merge.
Coming up with a testcase for this is somewhat difficult, since
recursive and ort both handle nearly any two-headed merge (there is
a separate code path that checks for non-two-headed merges and
already returns "2" for them). So use a somewhat synthetic testcase
of having the index not match HEAD before the merge starts, since all
merge strategies will abort for that.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the last commit and the links therein (especially commit
9822175d2b ("Ensure index matches head before invoking merge machinery,
round N", 2019-08-17), we have had a very long history of problems with
failing to enforce the requirement that index matches HEAD when starting
a merge.
The "trivial merge" logic in builtin/merge.c is yet another such case
we previously missed. Add a check for it to ensure it aborts if the
index does not match HEAD, and add a testcase where this fix is needed.
Note that the fix here would also incidentally be an alternative fix
for the testcase added in the last patch, but the fix in the last patch
is still needed when multiple merge strategies are in use, so tweak the
testcase from the previous commit so that it continues to exercise the
codepath added in the last commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in commit 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17), we have had a very
long history of problems with failing to enforce the requirement that
index matches HEAD when starting a merge. One of the commits
referenced in the long tale of issues arising from lax enforcement of
this requirement was commit 55f39cf755 ("merge: fix misleading
pre-merge check documentation", 2018-06-30), which tried to document
the requirement and noted there were some exceptions. As mentioned in
that commit message, the `resolve` strategy was the one strategy that
did not have an explicit index matching HEAD check, and the reason it
didn't was that I wasn't able to discover any cases where the
implementation would fail to catch the problem and abort, and didn't
want to introduce unnecessary performance overhead of adding another
check.
Well, today I discovered a testcase where the implementation does not
catch the problem and so an explicit check is needed. Add a testcase
that previously would have failed, and update git-merge-resolve.sh to
have an explicit check. Note that the code is copied from 3ec62ad9ff
("merge-octopus: abort if index does not match HEAD", 2016-04-09), so
that we reuse the same message and avoid making translators need to
translate some new message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When callers are using `cat-file` via one of the stdin-driven `--batch`
modes, all input is newline-delimited. This presents a problem when
callers wish to ask about, e.g. tree-entries that have a newline
character present in their filename.
To support this niche scenario, introduce a new `-z` mode to the
`--batch`, `--batch-check`, and `--batch-command` suite of options that
instructs `cat-file` to treat its input as NUL-delimited, allowing the
individual commands themselves to have newlines present.
The refactoring here is slightly unfortunate, since we turn loops like:
while (strbuf_getline(&buf, stdin) != EOF)
into:
while (1) {
int ret;
if (opt->nul_terminated)
ret = strbuf_getline_nul(&input, stdin);
else
ret = strbuf_getline(&input, stdin);
if (ret == EOF)
break;
}
It's tempting to think that we could use `strbuf_getwholeline()` and
specify either `\n` or `\0` as the terminating character. But for input
on platforms that include a CR character preceeding the LF, this
wouldn't quite be the same, since `strbuf_getline(...)` will trim any
trailing CR, while `strbuf_getwholeline(&buf, stdin, '\n')` will not.
In the future, we could clean this up further by introducing a variant
of `strbuf_getwholeline()` that addresses the aforementioned gap, but
that approach felt too heavy-handed for this pair of uses.
Some tests are added in t1006 to ensure that `cat-file` produces the
same output in `--batch`, `--batch-check`, and `--batch-command` modes
with and without the new `-z` option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future commit will want to ensure that various `--batch`-related
options produce the same output whether their input is newline
terminated, or NUL terminated (and a to-be-implemented `-z` option
exists).
To prepare for this, extract the given input(s) into separate variables
to that their LF characters can easily be converted into NUL bytes when
testing the new `-z` mode.
This is consistent with other tests in t1006 (which these days is no
longer a shining example of our CodingGuidelines).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is no index file, e.g., because the repository has just been
created, we return zero early (unless `must_exist` makes us die
instead.)
This early return means we do not set up `istate->repo`. With
`core.untrackedCache=true`, the recent e6a653554b ("untracked-cache:
support '--untracked-files=all' if configured", 2022-03-31) will
eventually pass down `istate->repo` as a null pointer to
`repo_config_get_string()`, causing a segmentation fault.
If we do hit this early return, set up `istate->repo` similar to when we
actually read the index.
Reported-by: Joey Hess <id@joeyh.name>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
Earlier, HTTP transport clients learned to tell the server side
what locale they are in by sending Accept-Language HTTP header, but
this was done only for some requests but not others.
* ll/curl-accept-language:
remote-curl: send Accept-Language header to server
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
* hx/lookup-commit-in-graph-fix:
t5330: remove run_with_limited_processses()
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
The resolve-undo information in the index was not protected against
GC, which has been corrected.
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
When the user runs 'git rebase -i --update-refs', the end message still
says only
Successfully rebased and updated <HEAD-ref>.
Update the sequencer to collect the successful (and unsuccessful) ref
updates due to the --update-refs option, so the end message now says
Successfully rebased and updated <HEAD-ref>.
Updated the following refs with --update-refs:
refs/heads/first
refs/heads/third
Failed to update the following refs with --update-refs:
refs/heads/second
To test this output, we need to be very careful to format the expected
error to drop the leading tab characters. Also, we need to be aware that
the verbose output from 'git rebase' is writing progress lines which
don't use traditional newlines but clear the line after every progress
item is complete. When opening the error file in an editor, these lines
are visible, but when looking at the diff in a terminal those lines
disappear because of the characters that delete the previous characters.
Use 'sed' to clear those progress lines and clear the tabs so we can get
an exact match on our expected output.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change added the --update-refs command-line option. For
users who always want this mode, create the rebase.updateRefs config
option which behaves the same way as rebase.autoSquash does with the
--autosquash option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interactive rebase provides opportunities for the user to edit the
todo list. The --update-refs option initializes the list with some
'update-ref <ref>' steps, but the user could add these manually.
Further, the user could add or remove these steps during pauses in the
interactive rebase.
Add a new method, todo_list_filter_update_refs(), that scans a todo_list
and compares it to the stored update-refs file. There are two actions
that can happen at this point:
1. If a '<ref>/<before>/<after>' triple in the update-refs file does not
have a matching 'update-ref <ref>' command in the todo-list _and_ the
<after> value is the null OID, then remove that triple. Here, the
user removed the 'update-ref <ref>' command before it was executed,
since if it was executed then the <after> value would store the
commit at that position.
2. If a 'update-ref <ref>' command in the todo-list does not have a
matching '<ref>/<before>/<after>' triple in the update-refs file,
then insert a new one. Store the <before> value to be the current
OID pointed at by <ref>. This is handled inside of the
init_update_ref_record() helper method.
We can test that this works by rewriting the todo-list several times in
the course of a rebase. Check that each ref is locked or unlocked for
updates after each todo-list update. We can also verify that the ref
update fails if a concurrent process updates one of the refs after the
rebase process records the "locked" ref location.
To help these tests, add a new 'set_replace_editor' helper that will
replace the todo-list with an exact file.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the 'git rebase --update-refs' option
which added 'update-ref <ref>' commands to the todo list of an
interactive rebase.
Teach Git to record the HEAD position when reaching these 'update-ref'
commands. The ref/before/after triple is stored in the
$GIT_DIR/rebase-merge/update-refs file. A previous change parsed this
file to avoid having other processes updating the refs in that file
while the rebase is in progress.
Not only do we update the file when the sequencer reaches these
'update-ref' commands, we then update the refs themselves at the end of
the rebase sequence. If the rebase is aborted before this final step,
then the refs are not updated. The 'before' value is used to ensure that
we do not accidentally obliterate a ref that was updated concurrently
(say, by an older version of Git or a third-party tool).
Now that the 'git rebase --update-refs' command is implemented to write
to the update-refs file, we can remove the fake construction of the
update-refs file from a test in t2407-worktree-heads.sh.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working on a large feature, it can be helpful to break that feature
into multiple smaller parts that become reviewed in sequence. During
development or during review, a change to one part of the feature could
affect multiple of these parts. An interactive rebase can help adjust
the multi-part "story" of the branch.
However, if there are branches tracking the different parts of the
feature, then rebasing the entire list of commits can create commits not
reachable from those "sub branches". It can take a manual step to update
those branches.
Add a new --update-refs option to 'git rebase -i' that adds 'update-ref
<ref>' steps to the todo file whenever a commit that is being rebased is
decorated with that <ref>. At the very end, the rebase process updates
all of the listed refs to the values stored during the rebase operation.
Be sure to iterate after any squashing or fixups are placed. Update the
branch only after those squashes and fixups are complete. This allows a
--fixup commit at the tip of the feature to apply correctly to the sub
branch, even if it is fixing up the most-recent commit in that part.
This change update the documentation and builtin to accept the
--update-refs option as well as updating the todo file with the
'update-ref' commands. Tests are added to ensure that these todo
commands are added in the correct locations.
This change does _not_ include the actual behavior of tracking the
updated refs and writing the new ref values at the end of the rebase
process. That is deferred to a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() helper helps commands like 'git branch' and
'git fetch' from overwriting refs that are currently checked out in
other worktrees.
A future update to 'git rebase' will introduce a new '--update-refs'
option which will update the local refs that point to commits that are
being rebased. To avoid collisions as the rebase completes, we want to
make the future data store for these refs to be considered by
branch_checked_out().
The data store is a plaintext file inside the 'rebase-merge' directory
for that worktree. The file lists refnames followed by two OIDs, each on
separate lines. The OIDs will be used to store the original values of
the refs and the to-be-written values as the rebase progresses, but can
be ignored at the moment.
Create a new sequencer_get_update_refs_state() method that parses this
file and populates a struct string_list with the ref-OID pairs. We can
then use this list to add to the current_checked_out_branches strmap
used by branch_checked_out().
To properly navigate to the rebase directory for a given worktree,
extract the static strbuf_worktree_gitdir() method to a public API
method.
We can test that this works without having Git write this file by
artificially creating one in our test script, at least until 'git rebase
--update-refs' is implemented and we can use it directly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t2407 that verify the branch_checked_out() helper in the
case of bisects and rebases were added by 9347303db89 (branch: check for
bisects and rebases, 2022-06-08). However, that commit failed to check
for rebases that are using the 'apply' backend.
Add a test that checks the apply backend. The implementation was already
correct here, but it is good to have regression tests before modifying
the implementation further.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests added by d2ba271aad (branch: check for bisects and rebases,
2022-06-14) modified hidden state to verify the branch_checked_out()
helper. While this indeed checks that the method implementation is _as
designed_, it doesn't show that it is _correct_. Specifically, if 'git
bisect' or 'git rebase' change their back-end for preserving refs, then
these tests do not demonstrate that drift as a bug in
branch_checked_out().
Modify the tests in t2407 to actually rely on a paused bisect or rebase.
This requires adding the !SANITIZE_LEAK prereq for tests using those
builtins. The logic is still tested for leaks in the final test which
does set up that back-end directly for an error state that should not be
possible using Git commands.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "whitelist" has cultural implications that are not inclusive.
Thankfully, it is not difficult to reword and avoid its use.
Focus on changes in the test scripts, since most of the changes are in
comments and test names. The renamed test_allow_var helper is only used
once inside the widely-used test_proto helper.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation and error messages for git-cvsserver include some
references to a "whitelist" that is not otherwise included in the
documentation. When different parts of the documentation do not use
common language, this can lead to confusion as to how things are meant
to operate.
Further, the word "whitelist" has cultural implications that make its
use non-inclusive. Thankfully, we can remove it while increasing
clarity.
Update Documentation/git-cvsserver.txt in a similar way to the previous
change to Documentation/git-daemon.txt. The optional '<directory>...'
list can specify a list of allowed directories. We refer to that list
directly inside of the documentation for the GIT_CVSSERVER_ROOT
environment variable.
While modifying this documentation, update the environment variables to
use a list format. We use the modern way of tabbing the description of
each variable in this section. We do _not_ update the description of
'<directory>...' to use tabs this way since the rest of the items in the
OPTIONS list do not use this modern formatting.
A single error message in the actual git-cvsserver.perl code refers to
the whitelist during argument parsing. Instead, refer to the directory
list that has been clarified in the documentation.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
* en/merge-dual-dir-renames-fix:
merge-ort: fix issue with dual rename and add/add conflict
merge-ort: shuffle the computation and cleanup of potential collisions
merge-ort: make a separate function for freeing struct collisions
merge-ort: small cleanups of check_for_directory_rename
t6423: add tests of dual directory rename plus add/add conflict
Tweak tests so that they still work when the "git init" template
did not create .git/info directory.
* ab/test-without-templates:
tests: don't assume a .git/info for .git/info/sparse-checkout
tests: don't assume a .git/info for .git/info/exclude
tests: don't assume a .git/info for .git/info/refs
tests: don't assume a .git/info for .git/info/attributes
tests: don't assume a .git/info for .git/info/grafts
tests: don't depend on template-created .git/branches
t0008: don't rely on default ".git/info/exclude"
Teach "make all" to build gitweb as well.
* ab/build-gitweb:
gitweb/Makefile: add a "NO_GITWEB" parameter
Makefile: build 'gitweb' in the default target
gitweb/Makefile: include in top-level Makefile
gitweb: remove "test" and "test-installed" targets
gitweb/Makefile: prepare to merge into top-level Makefile
gitweb/Makefile: clear up and de-duplicate the gitweb.{css,js} vars
gitweb/Makefile: add a $(GITWEB_ALL) variable
gitweb/Makefile: define all .PHONY prerequisites inline
git-cat-file is used by tools like GitLab to get commit tag contents
that are then displayed to users. This content which has author,
committer or tagger information, could benefit from passing through the
mailmap mechanism before being sent or displayed.
This patch adds --[no-]use-mailmap command line option to the git
cat-file command. It also adds --[no-]mailmap option as an alias to
--[no-]use-mailmap.
This patch also introduces new test cases to test the mailmap mechanism in
git cat-file command.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While setting up an unresolved merge for `git rerere`, we run `git
rev-parse` and `git fmt-merge-msg` to create a variable `$fifth` and a
commit-message file `msg`, which we then never actually use. This has
been like that since these tests were added in 672d1b789b ("rerere:
migrate to parse-options API", 2010-08-05). This does exercise `git
rev-parse` and `git fmt-merge-msg`, but doesn't contribute to testing
`git rerere`. Drop these lines.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the overly verbose trace2 logging added in 9a4987677d (trace2:
add stats for fsync operations, 2022-03-30) (first released with
v2.36.0).
Since that change every single "git" command invocation has included
these "data" events, even though we'll only make use of these with
core.fsyncMethod=batch, and even then only have non-zero values if
we're writing object data to disk. See c0f4752ed2 (core.fsyncmethod:
batched disk flushes for loose-objects, 2022-04-04) for that feature.
As we're needing to indent the trace2_data_intmax() lines let's
introduce helper variables to ensure that our resulting lines (which
were already too) don't exceed the recommendations of the
CodingGuidelines. Doing that requires either wrapping them twice, or
introducing short throwaway variable names, let's do the latter.
The result was that e.g. "git version" would previously emit a total
of 6 trace2 events with the GIT_TRACE2_EVENT target (version, start,
cmd_ancestry, cmd_name, exit, atexit), but afterwards would emit
8. We'd emit 2 "data" events before the "exit" event.
The reason we didn't catch this was that the trace2 unit tests added
in a15860dca3 (trace2: t/helper/test-trace2, t0210.sh, t0211.sh,
t0212.sh, 2019-02-22) would omit any "data" events that weren't the
ones it cared about. Before this change to the C code 6/7 of our
"t/t0212-trace2-event.sh" tests would fail if this change was applied
to "t/t0212/parse_events.perl".
Let's make the trace2 testing more strict, and further append any new
events types we don't know about in "t/t0212/parse_events.perl". Since
we only invoke the "test-tool trace2" there's no guarantee that we'll
catch other overly verbose events in the future, but we'll at least
notice if we start emitting new events that are issues every time we
log anything with trace2's JSON target.
We exclude the "data_json" event type, we'd otherwise would fail on
both "win test" and "win+VS test" CI due to the logging added in
353d3d77f4 (trace2: collect Windows-specific process information,
2019-02-22). It looks like that logging should really be using
trace2_cmd_ancestry() instead, which was introduced later in
2f732bf15e (tr2: log parent process name, 2021-07-21), but let's
leave it for now.
The fix-up to aaf81223f4 (unpack-objects: use stream_loose_object()
to unpack large objects, 2022-06-11) is needed because we're changing
the behavior of these events as discussed above. Since we'd always
emit a "hardware-flush" event the test added in aaf81223f4 wasn't
testing anything except that this trace2 data was unconditionally
logged. Even if "core.fsyncMethod" wasn't set to "batch" we'd pass the
test.
Now we'll check the expected number of "writeout" v.s. "flush" calls
under "core.fsyncMethod=batch", but note that this doesn't actually
test if we carried out the sync using that method, on a platform where
we'd have to fall back to fsync() each of those "writeout" would
really be a "flush" (i.e. a full fsync()).
But in this case what we're testing is that the logic in
"unpack-objects" behaves as expected, not the OS-specific question of
whether we actually were able to use the "bulk" method.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build a typed sort function for the mergesort performance test tool
using DEFINE_LIST_SORT instead of calling llist_mergesort(). This gets
rid of the next pointer accessor functions and improves the performance
at the cost of a slightly higher object text size.
Before:
0071.12: llist_mergesort() unsorted 0.24(0.22+0.01)
0071.14: llist_mergesort() sorted 0.12(0.10+0.01)
0071.16: llist_mergesort() reversed 0.12(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6407 276 0 24701 31384 7a98 t/helper/test-mergesort.o
With this patch:
0071.12: DEFINE_LIST_SORT unsorted 0.22(0.21+0.01)
0071.14: DEFINE_LIST_SORT sorted 0.11(0.10+0.01)
0071.16: DEFINE_LIST_SORT reversed 0.11(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6615 276 0 25832 32723 7fd3 t/helper/test-mergesort.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define a typed sort function using DEFINE_LIST_SORT_DEBUG for the
mergesort sanity check instead of using llist_mergesort(). This gets
rid of the next pointer accessor functions and improves the performance
at the cost of slightly bigger object text.
Before:
Benchmark 1: t/helper/test-tool mergesort test
Time (mean ± σ): 108.4 ms ± 0.2 ms [User: 106.7 ms, System: 1.2 ms]
Range (min … max): 108.0 ms … 108.8 ms 27 runs
__TEXT __DATA __OBJC others dec hex
6251 276 0 23172 29699 7403 t/helper/test-mergesort.o
With this patch:
Benchmark 1: t/helper/test-tool mergesort test
Time (mean ± σ): 94.0 ms ± 0.2 ms [User: 92.4 ms, System: 1.1 ms]
Range (min … max): 93.7 ms … 94.5 ms 31 runs
__TEXT __DATA __OBJC others dec hex
6407 276 0 24701 31384 7a98 t/helper/test-mergesort.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git config's tab completion does not yet know about the "include"
and "includeIf" sections, nor the related "path" variable.
Add a description for these two sections in
'Documentation/config/includeif.txt', which points to git-config's
documentation, specifically the "Includes" and "Conditional Includes"
subsections.
As a side effect, tab completion can successfully complete the
'include', 'includeIf', and 'include.add' expressions.
This effect is tested by two new ad-hoc tests.
Variable completion only works for "include" for now.
Credit for the ideas behind this patch goes to
Ævar Arnfjörð Bjarmason.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Manuel Boni <ziosombrero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit demonstrates a bug where a commit-graph using
generation v2 could enter a state where one of the GDA2 values has its
most-significant bit set (indicating that its value should be read from
the extended offset table in the GDO2 chunk) without having a GDO2 chunk
to read from.
This results in the following error message being displayed to the
caller:
fatal: commit-graph requires overflow generation data but has none
This bug arises in the following scenario:
- We decide to write a commit-graph using generation number v2, and
decide (correctly) that no GDO2 chunk is necessary (e.g., because
all of the commiter date offsets are no larger than 2^31-1).
- The v2 generation numbers are stored in the `->generation` member of
the commit slab holding `struct commit_graph_data`'s.
- Later on, `load_commit_graph_info()` is called, overwriting the
v2 generation data in the aforementioned slab with any existing v1
generation data.
Then, when the commit-graph code goes to write the GDA2 chunk via
`write_graph_chunk_generation_data()`, we use the overwritten generation
v1 data in a place where we expect to use a v2 generation number:
offset = commit_graph_data_at(c)->generation - c->date;
...because `commit_graph_data_at(c)->generation` used to hold the v2
generation data, but it was overwritten to contain the v1 generation
number via `load_commit_graph_info()`.
If the `offset` computation above overflows the v2 generation number
max, then `write_graph_chunk_generation_data()` will update its count of
large offsets and write the marker accordingly:
if (offset > GENERATION_NUMBER_V2_OFFSET_MAX) {
offset = CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW | num_generation_data_overflows;
num_generation_data_overflows++;
}
and reads will look for the GDO2 chunk containing the overflowing v2
generation number, *after* the commit-graph code decided that no such
chunk was necessary.
The main problem is that the slab containing `struct commit_graph_data`
has a dual purpose. It is used to hold data that we are about to write
to disk while generating a commit-graph, as well as hold data that was
read from an existing commit-graph.
When the two mix, namely when the result of reading the commit-graph has
a side-effect that mixes poorly with an in-progress commit-graph write,
we end up with corrupt data.
A complete fix might be to introduce a new slab that is used exclusively
for writing, and gate access between the two slabs based on context
provided by the caller (e.g., whether this computation is part of a
"read" or "write" operation).
But a more minimal fix addresses the only known path which overwrites
the slab data, which is `compute_bloom_filters()` ->
`get_or_compute_bloom_filter()` -> `load_commit_graph_info()` ->
`fill_commit_graph_info()` by avoiding the last call which clobbers the
data altogether.
This path only needs to learn the graph position of a given commit so
that it can be used in `load_bloom_filter_from_graph()`. By replacing
the last steps of the above with one that records the graph position
into a temporary variable which is then used to load the existing Bloom
data, we eliminate the clobbering, removing the corruption.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upgrading a commit-graph using generation v1 to one using
generation v2, it is possible to force Git into a corrupt state where it
(incorrectly) believes that a GDO2 chunk is necessary, *after* deciding
not to write one.
This makes subsequent reads using the commit-graph produce the following
error message:
fatal: commit-graph requires overflow generation data but has none
Demonstrate this bug by increasing our test coverage to include a
minimal example of upgrading a commit-graph from generation v1 to v2.
The only notable components of this test are:
- The committer date of the commit is chosen carefully so that the
offset underflows when computed using a v1 generation number, but
would not overflow when using v2 generation numbers.
- The upgrade to generation number v2 must read in the v1 generation
numbers, which we can do by passing `--changed-paths`, which will
force the commit-graph internals to call `fill_commit_graph_info()`.
A future patch will squash this bug.
Reported-by: Jeff King <peff@peff.net>
Reproduced-by: Will Chandler <wfc@wfchandler.org>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a known social engineering attack that takes advantage of the
fact that a working tree can include an entire bare repository,
including a config file. A user could run a Git command inside the bare
repository thinking that the config file of the 'outer' repository would
be used, but in reality, the bare repository's config file (which is
attacker-controlled) is used, which may result in arbitrary code
execution. See [1] for a fuller description and deeper discussion.
A simple mitigation is to forbid bare repositories unless specified via
`--git-dir` or `GIT_DIR`. In environments that don't use bare
repositories, this would be minimally disruptive.
Create a config variable, `safe.bareRepository`, that tells Git whether
or not to die() when working with a bare repository. This config is an
enum of:
- "all": allow all bare repositories (this is the default)
- "explicit": only allow bare repositories specified via --git-dir
or GIT_DIR.
If we want to protect users from such attacks by default, neither value
will suffice - "all" provides no protection, but "explicit" is
impractical for bare repository users. A more usable default would be to
allow only non-embedded bare repositories ([2] contains one such
proposal), but detecting if a repository is embedded is potentially
non-trivial, so this work is not implemented in this series.
[1]: https://lore.kernel.org/git/kl6lsfqpygsj.fsf@chooglen-macbookpro.roam.corp.google.com
[2]: https://lore.kernel.org/git/5b969c5e-e802-c447-ad25-6acc0b784582@github.com
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use git_protected_config() to read `safe.directory` instead of
read_very_early_config(), making it 'protected configuration only'.
As a result, `safe.directory` now respects "-c", so update the tests and
docs accordingly. It used to ignore "-c" due to how it was implemented,
not because of security or correctness concerns [1].
[1] https://lore.kernel.org/git/xmqqlevabcsu.fsf@gitster.g/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`uploadpack.packObjectsHook` is the only 'protected configuration only'
variable today, but we've noted that `safe.directory` and the upcoming
`safe.bareRepository` should also be 'protected configuration only'. So,
for consistency, we'd like to have a single implementation for protected
configuration.
The primary constraints are:
1. Reading from protected configuration should be fast. Nearly all "git"
commands inside a bare repository will read both `safe.directory` and
`safe.bareRepository`, so we cannot afford to be slow.
2. Protected configuration must be readable when the gitdir is not
known. `safe.directory` and `safe.bareRepository` both affect
repository discovery and the gitdir is not known at that point [1].
The chosen implementation in this commit is to read protected
configuration and cache the values in a global configset. This is
similar to the caching behavior we get with the_repository->config.
Introduce git_protected_config(), which reads protected configuration
and caches them in the global configset protected_config. Then, refactor
`uploadpack.packObjectsHook` to use git_protected_config().
The protected configuration functions are named similarly to their
non-protected counterparts, e.g. git_protected_config_check_init() vs
git_config_check_init().
In light of constraint 1, this implementation can still be improved.
git_protected_config() iterates through every variable in
protected_config, which is wasteful, but it makes the conversion simple
because it matches existing patterns. We will likely implement constant
time lookup functions for protected configuration in a future series
(such functions already exist for non-protected configuration, i.e.
repo_config_get_*()).
An alternative that avoids introducing another configset is to continue
to read all config using git_config(), but only accept values that have
the correct config scope [2]. This technically fulfills constraint 2,
because git_config() simply ignores the local and worktree config when
the gitdir is not known. However, this would read incomplete config into
the_repository->config, which would need to be reset when the gitdir is
known and git_config() needs to read the local and worktree config.
Resetting the_repository->config might be reasonable while we only have
these 'protected configuration only' variables, but it's not clear
whether this extends well to future variables.
[1] In this case, we do have a candidate gitdir though, so with a little
refactoring, it might be possible to provide a gitdir.
[2] This is how `uploadpack.packObjectsHook` was implemented prior to
this commit.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparation to turn git-submodule.sh into a builtin.
* ab/submodule-cleanup:
git-sh-setup.sh: remove "say" function, change last users
git-submodule.sh: use "$quiet", not "$GIT_QUIET"
submodule--helper: eliminate internal "--update" option
submodule--helper: understand --checkout, --merge and --rebase synonyms
submodule--helper: report "submodule" as our name in some "-h" output
submodule--helper: rename "absorb-git-dirs" to "absorbgitdirs"
submodule update: remove "-v" option
submodule--helper: have --require-init imply --init
git-submodule.sh: remove unused top-level "--branch" argument
git-submodule.sh: make the "$cached" variable a boolean
git-submodule.sh: remove unused $prefix variable
git-submodule.sh: remove unused sanitize_submodule_env()
"git mv A B" in a sparsely populated working tree can be asked to
move a path between directories that are "in cone" (i.e. expected
to be materialized in the working tree) and "out of cone"
(i.e. expected to be hidden). The handling of such cases has been
improved.
* sy/mv-out-of-cone:
mv: add check_dir_in_index() and solve general dir check issue
mv: use flags mode for update_mode
mv: check if <destination> exists in index to handle overwriting
mv: check if out-of-cone file exists in index with SKIP_WORKTREE bit
mv: decouple if/else-if checks using goto
mv: update sparsity after moving from out-of-cone to in-cone
t1092: mv directory from out-of-cone to in-cone
t7002: add tests for moving out-of-cone file/directory
Allow large objects read from a packstream to be streamed into a
loose object file straight, without having to keep it in-core as a
whole.
* hx/unpack-streaming:
unpack-objects: use stream_loose_object() to unpack large objects
core doc: modernize core.bigFileThreshold documentation
object-file.c: add "stream_loose_object()" to handle large object
object-file.c: factor out deflate part of write_loose_object()
object-file.c: refactor write_loose_object() to several steps
unpack-objects: low memory footprint for get_data() in dry_run mode
"git merge-tree" learned a new mode where it takes two commits and
computes a tree that would result in the merge commit, if the
histories leading to these two commits were to be merged.
* en/merge-tree:
git-merge-tree.txt: add a section on potentional usage mistakes
merge-tree: add a --allow-unrelated-histories flag
merge-tree: allow `ls-files -u` style info to be NUL terminated
merge-ort: optionally produce machine-readable output
merge-ort: store more specific conflict information
merge-ort: make `path_messages` a strmap to a string_list
merge-ort: store messages in a list, not in a single strbuf
merge-tree: provide easy access to `ls-files -u` style info
merge-tree: provide a list of which files have conflicts
merge-ort: remove command-line-centric submodule message from merge-ort
merge-ort: provide a merge_get_conflicted_files() helper function
merge-tree: support including merge messages in output
merge-ort: split out a separate display_update_messages() function
merge-tree: implement real merges
merge-tree: add option parsing and initial shell for real merge function
merge-tree: move logic for existing merge into new function
merge-tree: rename merge_trees() to trivial_merge_trees()
In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
* gg/worktree-from-the-above:
dir: minor refactoring / clean-up
dir: traverse into repository
At the end of `git checkout <pathspec>`, we get a message informing how
many entries were updated in the working tree. However, this number can
be inaccurate for two reasons:
1) Delayed entries currently get counted twice.
2) Failed entries are included in the count.
The first problem happens because the counter is first incremented
before inserting the entry in the delayed checkout queue, and once again
when finish_delayed_checkout() calls checkout_entry(). And the second
happens because the counter is incremented too early in
checkout_entry(), before the entry was in fact checked out. Fix that by
moving the count increment further down in the call stack and removing
the duplicate increment on delayed entries. Note that we have to keep
a per-entry reference for the counter (both on parallel checkout and
delayed checkout) because not all entries are always accumulated at the
same counter. See checkout_worktree(), at builtin/checkout.c for an
example.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After checkout, git usually reports how many entries were updated at
that operation. However, because we count the entries too soon during
the checkout process, we may actually include entries that do not get
properly checked out in the end. This can lead to an inaccurate final
report if the user expects it to show only the *successful* updates.
This will be fixed in the next commit, but for now let's document it
with a test that cover all checkout modes.
Note that `test_checkout_workers` have to be slightly adjusted in order
to use the construct `test_checkout_workers ... test_must_fail git
checkout`. The function runs the command given to it with an assignment
prefix to set the GIT_TRACE2 variable. However, this this assignment has
an undefined behavior when the command is a shell function (like
`test_must_fail`). As POSIX specifies:
If the command name is a function that is not a standard utility
implemented as a function, variable assignments shall affect the
current execution environment during the execution of the function. It
is unspecified:
- Whether or not the variable assignments persist after the
completion of the function
- Whether or not the variables gain the export attribute during the
execution of the function
Thus, in order to make sure the GIT_TRACE2 value gets visible to the git
command executed by `test_must_fail`, export the variable and run git in
a subshell.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html
(Vol. 3: Shell and Utilities, Section 2.9.1: Simple Commands)
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of a `git checkout <pathspec>` operation, git reports how
many paths were checked out with a message like "Updated N paths from
the index". However, entries that end up on the delayed checkout queue
(as requested by a long-running process filter) get counted twice,
producing a wrong number in the final report. We will fix this bug in an
upcoming commit. For now, only document/demonstrate it with a
test_expect_failure.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 78d5e4cfb4 (tests: refactor --write-junit-xml code, 2022-05-21),
this developer refactored the `--write-junit-xml` code a bit, including
the part where the current test case's title was used in a `set`
invocation, but failed to account for the fact that some test cases'
titles start with a long option, which the `set` misinterprets as being
intended for parsing.
Let's fix this by using the `set -- <...>` form.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" sometimes perform poorly when reachability bitmaps are
used, even in a repository where other operations are helped by
bitmaps. The push.useBitmaps configuration variable is introduced
to allow disabling use of reachability bitmaps only for "git push".
* zk/push-use-bitmaps:
send-pack.c: add config push.useBitmaps
"git remote show [-n] frotz" now pays attention to negative
pathspec.
* jk/remote-show-with-negative-refspecs:
remote: handle negative refspecs in git remote show
Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
* ab/test-quoting-fix:
config tests: fix harmless but broken "rm -r" cleanup
test-lib.sh: fix prepend_var() quoting issue
tests: add missing double quotes to included library paths
* ds/branch-checked-out:
branch: drop unused worktrees variable
fetch: stop passing around unused worktrees variable
branch: fix branch_checked_out() leaks
branch: use branch_checked_out() when deleting refs
fetch: use new branch_checked_out() and add tests
branch: check for bisects and rebases
branch: add branch_checked_out() helper
run_with_limited_processses() is used to end the loop faster when an
infinite loop happen. But "ulimit" is tied to the entire development
station, and the test will fail due to too many other processes or using
"--stress".
Without run_with_limited_processses() the infinite loop can also be
stopped due to global configrations or quotas, and the verification
still works fine. So let's remove run_with_limited_processses().
Signed-off-by: Han Xin <hanxin.hx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git archive" to (optionally and then by default) avoid
spawning an external "gzip" process when creating ".tar.gz" (and
".tgz") archives.
* rs/archive-with-internal-gzip:
archive-tar: use internal gzip by default
archive-tar: use OS_CODE 3 (Unix) for internal gzip
archive-tar: add internal gzip implementation
archive-tar: factor out write_block()
archive: rename archiver data field to filter_command
archive: update format documentation
Introduce a helper to see if a branch is already being worked on
(hence should not be newly checked out in a working tree), which
performs much better than the existing find_shared_symref() to
replace many uses of the latter.
* ds/branch-checked-out:
branch: drop unused worktrees variable
fetch: stop passing around unused worktrees variable
branch: fix branch_checked_out() leaks
branch: use branch_checked_out() when deleting refs
fetch: use new branch_checked_out() and add tests
branch: check for bisects and rebases
branch: add branch_checked_out() helper
Git server end's ability to accept Accept-Language header was introduced
in f18604bbf2 (http: add Accept-Language header if possible, 2015-01-28),
but this is only used by very early phase of the transfer, which is HTTP
GET request to discover references. For other phases, like POST request
in the smart HTTP, the server does not know what language the client
speaks.
Teach git client to learn end-user's preferred language and throw
accept-language header to the server side. Once the server gets this header,
it has the ability to talk to end-user with language they understand.
This would be very helpful for many non-English speakers.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually clone tries to use the same local HEAD as the remote (unless the
user has given --branch explicitly). Even if the remote HEAD is detached
or unborn, we can detect those situations with modern versions of Git.
If the remote is too old to support the "unborn" extension (or it has
been disabled via config), then we can't know the name of the remote's
unborn HEAD, and we fall back whatever the local default branch name is
configured to be.
But that leads to one weird corner case. It's rare because it needs a
number of factors:
- the remote has an unborn HEAD
- the remote is too old to support "unborn", or has disabled it
- the remote has another branch "foo"
- the local default branch name is "foo"
In that case you end up with a local clone on an unborn "foo" branch,
disconnected completely from the remote's "foo". This is rare in
practice, but the result is quite confusing.
When choosing "foo", we can double check whether the remote has such a
name, and if so, start our local "foo" at the same spot, rather than
making it unborn.
Note that this causes a test failure in t5605, which is cloning from a
bundle that doesn't contain HEAD (so it behaves like a remote that
doesn't support "unborn"), but has a single "main" branch. That test
expects that we end up in the weird "unborn main" case, where we don't
actually check out the remote branch of the same name. Even though we
have to update the test, this seems like an argument in favor of this
patch: checking out main is what I'd expect from such a bundle.
So this patch updates the test for the new behavior and adds an adjacent
one that checks what the original was going for: if there's no HEAD and
the bundle _doesn't_ have a branch that matches our local default name,
then we end up with nothing checked out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless "--branch" was given, clone generally tries to match the local
HEAD to the remote one. For most repositories, this is easy: the remote
tells us which branch HEAD was pointing to, and we call our local
checkout() function on that branch.
When cloning an empty repository, it's a little more tricky: we have
special code that checks the transport's "unborn" extension, or falls back
to our local idea of what the default branch should be. In either case,
we point the new HEAD to that, and set up the branch.* config.
But that leaves one case unhandled: when the remote repository _isn't_
empty, but its HEAD is unborn. The checkout() function is smart enough
to realize we didn't fetch the remote HEAD and it bails with a warning.
But we'll have ignored any information the remote gave us via the unborn
extension. This leads to nonsense outcomes:
- If the remote has its HEAD pointing to an unborn "foo" and contains
another branch "bar", cloning will get branch "bar" but leave the
local HEAD pointing at "master" (or whatever our local default is),
which is useless. The project does not use "master" as a branch.
- Worse, if the other branch "bar" is instead called "master" (but
again, the remote HEAD is not pointing to it), then we end up with a
local unborn branch "master", which is not connected to the remote
"master" (it shares no history, and there's no branch.* config).
Instead, we should try to use the remote's HEAD, even if its unborn, to
be consistent with the other cases.
The reason this case was missed is that cmd_clone() handles empty and
non-empty repositories on two different sides of a conditional:
if (we have any refs) {
fetch refs;
check for --branch;
otherwise, try to point our head at remote head;
otherwise, our head is NULL;
} else {
check for --branch;
otherwise, try to use "unborn" extension;
otherwise, fall back to our default name name;
}
So the smallest change would be to repeat the "unborn" logic at the end
of the first block. But we can note some other overlaps and
inconsistencies:
- both sides have to handle --branch (though note that it's always an
error for the empty repo case, since an empty repo by definition
does not have a matching branch)
- the fall back to the default name is much more explicit in the
empty-repo case. The non-empty case eventually ends up bailing
from checkout() with a warning, which produces a similar result, but
fails to set up the branch config we do in the empty case.
So let's pull the HEAD setup out of this conditional entirely. This
de-duplicates some of the code and the result is easy to follow, because
helper functions like find_ref_by_name() do the right thing even in the
empty-repo case (i.e., by returning NULL).
There are two subtleties:
- for a remote with a detached HEAD, it will advertise an oid for HEAD
(which we store in our "remote_head" variable), but we won't find a
matching refname (so our "remote_head_points_at" is NULL). In this
case we make a local detached HEAD to match. Right now this happens
implicitly by reaching update_head() with a non-NULL remote_head
(since we skip all of the unborn-fallback). We'll now need to
account for it explicitly before doing the fallback.
- for an empty repo, we issue a warning to the user that they've
cloned an empty repo. The text of that warning doesn't make sense
for a non-empty repo with an unborn HEAD, so we'll have to
differentiate the two cases there. We could just use different text,
but instead let's allow the code to continue down to checkout(),
which will issue an appropriate warning, like:
remote HEAD refers to nonexistent ref, unable to checkout
Continuing down to checkout() will make it easier to do more fixes
on top (see below).
Note that this patch fixes the case where the other side reports an
unborn head to us using the protocol extension. It _doesn't_ fix the
case where the other side doesn't tell us, we locally guess "master",
and the other side happens to have a "master" which its HEAD doesn't
point. But it doesn't make anything worse there, and it should actually
make it easier to fix that problem on top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update test style in t/t30[*].sh for uniformity, that's to
keep test title the same line with helper function itself,
and fix some indentions.
Add a new section "recommended style" in t/README to
encourage people to use more modern style in test.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is code in both merge-recursive and merge-ort for avoiding doubly
transitive renames (i.e. one side renames directory A/ -> B/, and the
other side renames directory B/ -> C/), because this combination would
otherwise make a mess for new files added to A/ on the first side and
wondering which directory they end up in -- especially if there were
even more renames such as the first side renaming C/ -> D/. In such
cases, it just turns "off" directory rename detection for the higher
order transitive cases.
The testcases added in t6423 a couple commits ago are slightly different
but similar in principle. They involve a similar case of paired
renaming but instead of A/ -> B/ and B/ -> C/, the second side renames
a leading directory of B/ to C/. And both sides add a new file
somewhere under the directory that the other side will rename. While
the new files added start within different directories and thus could
logically end up within different directories, it is weird for a file
on one side to end up where the other one started and not move along
with it. So, let's just turn off directory rename detection in this
case as well.
Another way to look at this is that if the source name involved in a
directory rename on one side is the target name of a directory rename
operation for a file from the other side, then we avoid the doubly
transitive rename. (More concretely, if a directory rename on side D
wants to rename a file on side E from OLD_NAME -> NEW_NAME, and side D
already had a file named NEW_NAME, and a directory rename on side E
wants to rename side D's NEW_NAME -> NEWER_NAME, then we turn off the
directory rename detection for NEW_NAME to prevent the
NEW_NAME -> NEWER_NAME rename, and instead end up with an add/add
conflict on NEW_NAME.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an attempt at minimalizing a testcase reported by Glen Choo
with tensorflow where merge-ort would report an assertion failure:
Assertion failed: (ci->filemask == 2 || ci->filemask == 4), function apply_directory_rename_modifications, file merge-ort.c, line 2410
reversing the direction of the merge provides a different error:
error: cache entry has null sha1: ...
fatal: unable to write .git/index
so we add testcases for both. With these new testcases, the
recursive strategy differs in that it returns the latter error for
both merge directions.
These testcases are somehow a little different than Glen's original
tensorflow testcase in that these ones trigger a bug with the recursive
algorithm whereas his testcase didn't. I figure that means these
testcases somehow manage to be more comprehensive.
Reported-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which is an old
regression but has become widely known because the C version
has become the default in the latest release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which was fixed.
* js/add-i-delete:
add --interactive: allow `update` to stage deleted files
Originally, moving a <source> directory which is not on-disk due
to its existence outside of sparse-checkout cone, "giv mv" command
errors out with "bad source".
Add a helper check_dir_in_index() function to see if a directory
name exists in the index. Also add a SKIP_WORKTREE_DIR bit to mark
such directories.
Change the checking logic, so that such <source> directory makes
"giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a sparse file into cone can result in unwarned
overwrite of existing entry. The expected behavior is that if the
<destination> exists in the entry, user should be prompted to supply
a [-f|--force] to carry out the operation, or the operation should
fail.
Add a check mechanism to do that.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> file which is not on-disk but exists in
index as a SKIP_WORKTREE enabled cache entry, "giv mv" command errors
out with "bad source".
Change the checking logic, so that such <source>
file makes "giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test for "mv: add check_dir_in_index() and solve general dir check
issue" in this series.
This change tests the following:
1. mv <source> as a directory on the sparse index boundary (where it
would be a sparse directory in a sparse index).
2. mv <source> as a directory which is deeper than the boundary (so
the sparse index would expand in the cache_name_pos() method).
These tests can be written now for correctness, but later the first case
can be updated to use the 'ensure_not_expanded' helper in t1092.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add corresponding tests to test following situations:
We do not have sufficient coverage of moving files outside
of a sparse-checkout cone. Create new tests covering this
behavior, keeping in mind that the user can include --sparse
(or not), move a file or directory, and the destination can
already exist in the index (in this case user can use --force
to overwrite existing entry).
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in a310d43494 ([PATCH] Deltification
library work by Nicolas Pitre., 2005-05-19), as a result we can mark
another test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in fa099d2322 (worktree.c: kill
parse_ref() in favor of refs_resolve_ref_unsafe(), 2017-04-24), as a
result we can mark another test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks introduced with these tests in f1294eaf7f (bloom.c:
introduce core Bloom filter constructs, 2020-03-30), as a result we
can mark almost the entirety of t0095-bloom.sh as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true", there's still an
unrelated memory leak in "git commit" in one of the tests, let's skip
that one under SANITIZE_LEAK for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks introduced with these tests in
75459410ed (json_writer: new routines to create JSON data,
2018-07-13), as a result we can mark a test as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks in "test-tool regex" which have been there since
c91841594c (test-regex: Add a test to check for a bug in the regex
routines, 2012-09-01), as a result we can mark a test as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
We could regfree() on the die() paths here, which would make some
invocations of valgrind(1) happy, but let's just target SANITIZE=leak
for now. Variables that are still reachable when we die() are not
reported as leaks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool urlmatch-normalization", as a result
we can mark the corresponding test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks in two test-tools used by t0090-cache-tree.sh. As a
result we can mark the test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool path-utils", as a result we can mark
the corresponding test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool test-hash" which has been there since
b57cbbf8a8 (test-sha1: test hashing large buffer, 2006-06-24), as a
result we can mark more tests as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 44c175c7a4 (pull: error on no merge
candidates, 2015-06-18). As a result we can mark several tests as
passing with SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
Removing the "int ret = 0" assignment added here in a6d7eb2c7a (pull:
optionally rebase submodules (remote submodule changes only),
2017-06-23) is not a logic error, it could always have been left
uninitialized (as "int ret"), now that we'll use the "ret" from the
upper scope we can drop the assignment in the "opt_rebase" branch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak where "cat-file" will leak the "path" member. See
e5fba602e5 (textconv: support for cat_file, 2010-06-15) for the code
that introduced the offending get_oid_with_context() call (called
get_sha1_with_context() at the time).
As a result we can mark several tests as passing with SANITIZE=leak
using "TEST_PASSES_SANITIZE_LEAK=true".
As noted in dc944b65f1 (get_sha1_with_context: dynamically allocate
oc->path, 2017-05-19) callers must free the "path" member. That same
commit added the relevant free() to this function, but we weren't
catching cases where we'd return early.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "merge-file", we need to loop over the "mmfs"
array and free() what we've got so far when we error out. As a result
we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "git check-ref-format" that's been present in the
code in one form or another since 38eedc634b (git check-ref-format
--print, 2009-10-12), the code got substantially refactored in
cfbe22f03f (check-ref-format: handle subcommands in separate
functions, 2010-08-05).
As a result we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test had a line reading
! test_file_is_empty actual
which was meant to be
! test_must_be_empty actual
The test worked despite the error, because even though
test_file_is_empty is a non-existent function, the '!' negated the
return value and made it pass. It'd be better to avoid the negation,
so something like
test_file_not_empty actual
would be better, but perhaps it makes even more sense to specify the
number of lines of expected output to make the test a bit tighter.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Elijah Newren <newren@palantir.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph is used to opportunistically optimize accesses to
certain pieces of information on commit objects, and
lookup_commit_in_graph() tries to say "no" when the requested commit
does not locally exist by returning NULL, in which case the caller
can ask for (which may result in on-demand fetching from a promisor
remote) and parse the commit object itself.
However, it uses a wrong helper, repo_has_object_file(), to do so.
This helper not only checks if an object is mmediately available in
the local object store, but also tries to fetch from a promisor remote.
But the fetch machinery calls lookup_commit_in_graph(), thus causing an
infinite loop.
We should make lookup_commit_in_graph() expect that a commit given to it
can be legitimately missing from the local object store, by using the
has_object_file() helper instead.
Signed-off-by: Han Xin <hanxin.hx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path, but should just use
do_get_submodule_displaypath() for consistency.
Do this replacement and reorder the code slightly to avoid computing
the display path twice.
Until the preceding commit this code had never been tested, with our
newly added tests we can see that both these sites have been computing
the display path incorrectly ever since they were introduced in
48308681b0 (git submodule update: have a dedicated helper for cloning,
2016-02-29) [1]:
- The first hunk puts a "/" between recursive_prefix and ce->name, but
recursive_prefix already ends with "/".
- The second hunk calls relative_path() on recursive_prefix and
ce->name, but relative_path() only makes sense when both paths share
the same base directory. This is never the case here:
- recursive_prefix is the path from the topmost superproject to the
current submodule
- ce->name is the path from the root of the current submodule to its
submodule.
so, e.g. recursive_prefix="super" and ce->name="submodule" produces
displayname="../super" instead of "super/submodule".
[1] I verified this by applying the tests to 48308681b0.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path. As discussed in the
next commit the "Skipping" output isn't exactly what we want, but
let's test how we behave now, before changing the existing behavior.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "test_when_finished" cleanup phase added in 4179b4897f (config:
allow overriding of global and system configuration, 2021-04-19) has
never worked as intended, firstly the ".config/git" is a directory, so
we'd need the "-r" flag, but more importantly the $HOME variable
wasn't properly quoted.
We'd thus end up trying to remove the "trash" part of "trash
directory", which wouldn't fail with "-f", since "rm -f" won't fail on
non-existing files.
It's possible that this would have caused an actual failure if someone
had a $HOME with a space character in it, such that our "rm -f" would
fail to remove an existing directory, but in practice that probably
never happened.
Let's fix both the quoting issue, and the other issue cleanup issue in
4179b4897f, which is that we were attempting to clean up
~/.config/git, but weren't cleaing up ~/.gitconfig.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a quoting issue in the function introduced in
b9638d7286 (test-lib: make $GIT_BUILD_DIR an absolute path,
2022-02-27), running the test suite where the git checkout was on a
path with e.g. a space in it would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix inclusion errors which would occur if the $TEST_DIRECTORY had $IFS
whitespace in it.
See d42bab442d (core.fsyncmethod: tests for batch mode, 2022-04-04)
and a242c150eb (vimdiff: integrate layout tests in the unit tests
framework ('t' folder), 2022-03-30) for the two relevant commits. Both
were first released with v2.37.0-rc0 (and were also part of v2.37.0).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of `git add -i` used `git update-index --add
--remove`, but the built-in version implemented only the `--add` part.
This fixes https://github.com/msys2/MSYS2-packages/issues/3066
Reported-by: Christoph Reiter <reiter.christoph@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the special "test" targets for gitweb added in
958a846721 (gitweb/Makefile: Add 'test' and 'test-installed' targets,
2010-09-26). Unlike e.g. "contrib/scalar" and "contrib/subtree" the
"gitweb" tests themselves live in our top-level t/ directory.
It therefore doesn't make sense to maintain this indirection, no more
than it would to have a "git-send-email-test". By dropping it we'll
also free other tests to use the t95*.sh prefix.
These removed targets are unlikely to be used by anyone, and to the
extent that they are we can easily use an invocation like this
instead:
make test T='t[0-9]*gitweb*.sh'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e84c3cf3dc (git-submodule.sh: accept verbose flag in cmd_update to
be non-quiet, 2018-08-14) the "git submodule update" sub-command was
made to understand "-v", but the option was never documented.
The only in-tree user has been this test added in
3ad0401e9e (submodule update: silence underlying merge/rebase with
"--quiet", 2020-09-30), it wasn't per-se testing --quiet, but fixing a
bug in e84c3cf3dc: It used to set "GIT_QUIET=0" instead of unsetting
it on "-v", and thus we'd end up passing "--quiet" to "git
submodule--helper" on "-v", since the "--quiet" option was passed
using the ${parameter:+word} construct.
Furthermore, even if someone had used the "-v" option they'd only be
getting the default output. Our default in both git-submodule.sh and
"git submodule--helper" has been to be "verbose", so the only way this
option could have matter is if it were used as e.g.:
git submodule --quiet update -v [...]
I.e. to undo the effect of a previous "--quiet" on the command-line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.4
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.34:
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.33:
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.30:
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
Folks may want to merge histories that have no common ancestry; provide
a flag with the same name as used by `git merge` to allow this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much as `git ls-files` has a -z option, let's add one to merge-tree so
that the conflict-info section can be NUL terminated (and avoid quoting
of unusual filenames).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like `git merge` updates the index with information of the form
(mode, oid, stage, name)
provide this output for conflicted files for merge-tree as well.
Provide a --name-only option for users to exclude the mode, oid, and
stage and only get the list of conflicted filenames.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of `git merge-tree --write-tree` will often want to know which
files had conflicts. While they could potentially attempt to parse the
CONFLICT notices printed, those messages are not meant to be machine
readable. Provide a simpler mechanism of just printing the files (in
the same format as `git ls-files` with quoting, but restricted to
unmerged files) in the output before the free-form messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was one case in merge-ort that would call path_msg() multiple
times for the same logical conflict, and it was in order to give advice
about how to resolve a conflict. This advice does not make as much
sense with remerge-diff, or with merge-tree being invoked by a GitHub
GUI for resolution of messages, and is making it hard to provide
which-logical-conflict-affects-which-paths information in a machine
parseable way to a higher level caller of merge-tree. Let's simply
remove this informational message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git merge-tree --write-tree`, we previously would only
return an exit status reflecting the cleanness of a merge, and print out
the toplevel tree of the resulting merge. Merges also have
informational messages, such as:
* "Auto-merging <PATH>"
* "CONFLICT (content): ..."
* "CONFLICT (file/directory)"
* etc.
In fact, when non-content conflicts occur (such as file/directory,
modify/delete, add/add with differing modes, rename/rename (1to2),
etc.), these informational messages may be the only notification the
user gets since these conflicts are not representable in the contents
of the file.
Add a --[no-]messages option so that callers can request these messages
be included at the end of the output. Include such messages by default
when there are conflicts, and omit them by default when the merge is
clean.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the ability to perform real merges rather than just trivial
merges (meaning handling three way content merges, recursive ancestor
consolidation, renames, proper directory/file conflict handling, and so
forth). However, unlike `git merge`, the working tree and index are
left alone and no branch is updated.
The only output is:
- the toplevel resulting tree printed on stdout
- exit status of 0 (clean), 1 (conflicts present), anything else
(merge could not be performed; unknown if clean or conflicted)
This output is meant to be used by some higher level script, perhaps in
a sequence of steps like this:
NEWTREE=$(git merge-tree --write-tree $BRANCH1 $BRANCH2)
test $? -eq 0 || die "There were conflicts..."
NEWCOMMIT=$(git commit-tree $NEWTREE -p $BRANCH1 -p $BRANCH2)
git update-ref $BRANCH1 $NEWCOMMIT
Note that higher level scripts may also want to access the
conflict/warning messages normally output during a merge, or have quick
access to a list of files with conflicts. That is not available in this
preliminary implementation, but subsequent commits will add that
ability (meaning that NEWTREE would be a lot more than a tree in the
case of conflicts).
This also marks the traditional trivial merge of merge-tree as
deprecated. The trivial merge not only had limited applicability, the
output format was also difficult to work with (and its format
undocumented), and will generally be less performant than real merges.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a command line option analogous to that of GNU
grep(1)'s -m / --max-count, which users might already be used to.
This makes it possible to limit the amount of matches shown in the
output while keeping the functionality of other options such as -C
(show code context) or -p (show containing function), which would be
difficult to do with a shell pipeline (e.g. head(1)).
Signed-off-by: Carlos López 00xc@protonmail.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8d92fb2927 (dir: replace exponential algorithm with a linear one,
2020-04-01) traversing into a repository's directory tree when the
traversal began outside the repository's standard location has failed
because the encountered repository was identified as a nested foreign
repository.
Prior to this commit, the failure to traverse into a repository's
default worktree location was observable from a user's perspective under
either of the following conditions (there may be others):
1) Set the `core.worktree` location to a parent directory of the
default worktree; or
2) Use the `--git_dir` option while the working directory is outside
the repository's default worktree location
Under either of these conditions, symptoms of the failure to traverse
into the repository's default worktree location include the inability to
add files to the index or get a list of untracked files via ls-files.
This commit adds a check to determine whether a nested repository that
is encountered in recursing a path is actually `the_repository`. If so,
we simply treat the directory as if it doesn't contain a nested
repository.
The commit includes test-cases to reduce the likelihood of future
regressions.
Signed-off-by: Goss Geppert <ggossdev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The many test_configured_prune tests in t5510-fetch.sh test many
combinations of --prune, --prune-tags, and using 'origin' or an explicit
URL. Some machinery was introduced in e1790f9245 (fetch tests: fetch
<url> <spec> as well as fetch [<remote>], 2018-02-09) to replace
'origin' with this explicit URL. This URL is a "file:///" URL for the
root of the $TRASH_DIRECTORY.
However, if the current build tree has an '@' symbol, the
replacement using perl fails. It drops the '@' as well as anything
else in that directory name. You can observe this locally by
cloning git.git into a "victim@03" directory and running the test
script.
As we are writing in Perl anyway, pass in the shell variables involved
to the script as arguments and perform necessary string transformations
inside it, instead of assuming that it is sufficient to enclose the
$remote_url variable inside a pair of single quotes.
Reported-by: Randall Becker <rsbecker@nexbridge.com>
Original-patch-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash command line prompt (in contrib/) update.
* jp/prompt-clear-before-upstream-mark:
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
Reachability bitmaps are designed to speed up the "counting objects"
phase of generating a pack during a clone or fetch. They are not
optimized for Git clients sending a small topic branch via "git push".
In some cases (see [1]), using reachability bitmaps during "git push"
can cause significant performance regressions.
Add a new "push.useBitmaps" configuration variable to allow users to
tell "git push" not to use bitmaps. We already have "pack.bitmaps"
that controls the use of bitmaps, but a separate configuration variable
allows the reachability bitmaps to still be used in other areas,
such as "git upload-pack", while disabling it only for "git push".
[1]: https://lore.kernel.org/git/87zhoz8b9o.fsf@evledraar.gmail.com/
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Improve test coverage with a handful of tests.
* ds/more-test-coverage:
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
By default, the git remote show command will query data from remotes to
show data about what might be done on a future git fetch. This process
currently does not handle negative refspecs. This can be confusing,
because the show command will list refs as if they would be fetched. For
example if the fetch refspec "^refs/heads/pr/*", it still displays the
following:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 new (next fetch will store in remotes/jdk19)
pr/2 new (next fetch will store in remotes/jdk19)
pr/3 new (next fetch will store in remotes/jdk19)
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
Fix this by adding an additional check inside of get_ref_states. If a
ref matches one of the negative refspecs, mark it as skipped instead of
marking it as new or tracked.
With this change, we now report remote branches that are skipped due to
negative refspecs properly:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 skipped
pr/2 skipped
pr/3 skipped
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
By showing the refs as skipped, it helps clarify that these references
won't actually be fetched.
This does not properly handle refs going stale due to a newly added
negative refspec. In addition, git remote prune doesn't handle that
negative refspec case either. Fixing that requires digging into
get_stale_heads and handling the case of a ref which exists on the
remote but is omitted due to a negative refspec locally.
Add a new test case which covers the functionality above, as well as a
new expected failure indicating the poor overlap with stale refs.
Reported-by: Pavel Rappo <pavel.rappo@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
va_list ap, cp;
va_copy(cp, ap);
va_start(ap, fmt);
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a 'git repack --cruft -d' with the wrapper 'git gc --cruft' to
exercise some logic in builtin/gc.c that adds the '--cruft' option to
the underlying 'git repack' command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--verbose' option reports what is being added and removed from the
index, but has not been tested up to this point. Augment the tests in
t2107 to check the '--verbose' option in some scenarios.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
Drop the dependency on gzip(1) and use our internal implementation to
create tar.gz and tgz files.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses zlib for its own object store, but calls gzip when creating tgz
archives. Add an option to perform the gzip compression for the latter
using zlib, without depending on the external gzip binary.
Plug it in by making write_block a function pointer and switching to a
compressing variant if the filter command has the magic value "git
archive gzip". Does that indirection slow down tar creation? Not
really, at least not in this test:
$ hyperfine -w3 -L rev HEAD,origin/main -p 'git checkout {rev} && make' \
'./git -C ../linux archive --format=tar HEAD # {rev}'
Benchmark #1: ./git -C ../linux archive --format=tar HEAD # HEAD
Time (mean ± σ): 4.044 s ± 0.007 s [User: 3.901 s, System: 0.137 s]
Range (min … max): 4.038 s … 4.059 s 10 runs
Benchmark #2: ./git -C ../linux archive --format=tar HEAD # origin/main
Time (mean ± σ): 4.047 s ± 0.009 s [User: 3.903 s, System: 0.138 s]
Range (min … max): 4.038 s … 4.066 s 10 runs
How does tgz creation perform?
$ hyperfine -w3 -L command 'gzip -cn','git archive gzip' \
'./git -c tar.tgz.command="{command}" -C ../linux archive --format=tgz HEAD'
Benchmark #1: ./git -c tar.tgz.command="gzip -cn" -C ../linux archive --format=tgz HEAD
Time (mean ± σ): 20.404 s ± 0.006 s [User: 23.943 s, System: 0.401 s]
Range (min … max): 20.395 s … 20.414 s 10 runs
Benchmark #2: ./git -c tar.tgz.command="git archive gzip" -C ../linux archive --format=tgz HEAD
Time (mean ± σ): 23.807 s ± 0.023 s [User: 23.655 s, System: 0.145 s]
Range (min … max): 23.782 s … 23.857 s 10 runs
Summary
'./git -c tar.tgz.command="gzip -cn" -C ../linux archive --format=tgz HEAD' ran
1.17 ± 0.00 times faster than './git -c tar.tgz.command="git archive gzip" -C ../linux archive --format=tgz HEAD'
So the internal implementation takes 17% longer on the Linux repo, but
uses 2% less CPU time. That's because the external gzip can run in
parallel on its own processor, while the internal one works sequentially
and avoids the inter-process communication overhead.
What are the benefits? Only an internal sequential implementation can
offer this eco mode, and it allows avoiding the gzip(1) requirement.
This implementation uses the helper functions from our zlib.c instead of
the convenient gz* functions from zlib, because the latter doesn't give
the control over the generated gzip header that the next patch requires.
Original-patch-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789 (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "fetch.credentialsInUrl" configuration variable introduced
in 6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06) to "transfer".
There are existing exceptions, but generally speaking the
"<namespace>.<var>" configuration should only apply to command
described in the "namespace" (and its sub-commands, so e.g. "clone.*"
or "fetch.*" might also configure "git-remote-https").
But in the case of "fetch.credentialsInUrl" we've got a configuration
variable that configures the behavior of all of "clone", "push" and
"fetch", someone adjusting "fetch.*" configuration won't expect to
have the behavior of "git push" altered, especially as we have the
pre-existing "{transfer,fetch,receive}.fsckObjects", which configures
different parts of the transfer dialog.
So let's move this configuration variable to the "transfer" namespace
before it's exposed in a release. We could add all of
"{transfer,fetch,pull}.credentialsInUrl" at some other time, but once
we have "fetch" configure "pull" such an arrangement would would be a
confusing mess, as we'd at least need to have "fetch" configure
"push" (but not the other way around), or change existing behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() method populates a strmap linking a refname to
a worktree that has that branch checked out. While unlikely, it is
possible that a bug or filesystem manipulation could create a scenario
where the same ref is checked out in multiple places. Further, there are
some states in an interactive rebase where HEAD and REBASE_HEAD point to
the same ref, leading to multiple insertions into the strmap. In either
case, the strmap_put() method returns the old value which is leaked.
Update branch_checked_out() to consume that pointer and free it.
Add a test in t2407 that checks this erroneous case. The test "checks
itself" by first confirming that the filesystem manipulations it makes
trigger the branch_checked_out() logic, and then sets up similar
manipulations to make it look like there are multiple worktrees pointing
to the same ref.
While TEST_PASSES_SANITIZE_LEAK would be helpful to demonstrate the
leakage and prevent it in the future, t2407 uses helpers such as 'git
clone' that cause the test to fail under that mode.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the last current use of find_shared_symref() that can easily be
replaced by branch_checked_out(). The benefit of this switch is that the
code is a bit simpler, but also it is faster on repeated calls.
The remaining uses of find_shared_symref() are non-trivial to remove, so
we probably should not continue in that direction:
* builtin/notes.c uses find_shared_symref() with "NOTES_MERGE_REF"
instead of "HEAD", so it doesn't have an immediate analogue with
branch_checked_out(). Perhaps we should consider extending it to
include that symref in addition to HEAD, BISECT_HEAD, and
REBASE_HEAD.
* receive-pack.c checks to see if a worktree has a checkout for the ref
that is being updated. The tricky part is that it can actually decide
to update the worktree directly instead of just skipping the update.
This all depends on the receive.denyCurrentBranch config option. The
implementation currenty cares about receiving the worktree in the
result, so the current branch_checked_out() prototype is insufficient
currently. This is something to investigate later, though, since a
large number of refs could be updated at the same time and using the
strmap implementation of branch_checked_out() could be beneficial.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching refs from a remote, it is possible that the refspec will
cause use to overwrite a ref that is checked out in a worktree. The
existing logic in builtin/fetch.c uses a possibly-slow mechanism. Update
those sections to use the new, more efficient branch_checked_out()
helper.
These uses were not previously tested, so add a test case that can be
used for these kinds of collisions. There is only one test now, but more
tests will be added as other consumers of branch_checked_out() are
added.
Note that there are two uses in builtin/fetch.c, but only one of the
messages is tested. This is because the tested check is run before
completing the fetch, and the untested check is not reachable without
concurrent updates to the filesystem. Thus, it is beneficial to keep
that extra check for the sake of defense-in-depth. However, we should
not attempt to test the check, as the effort required is too
complicated to be worth the effort. This use in update_local_ref()
also requires a change in the error message because we no longer have
access to the worktree struct, only the path of the worktree. This error
is so rare that making a distinction between the two is not critical.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() helper was added by the previous change, but it
used an over-simplified view to check if a branch is checked out. It
only focused on the HEAD symref, but ignored whether a bisect or rebase
was happening.
Teach branch_checked_out() to check for these things, and also add tests
to ensure that we do not lose this functionality in the future.
Now that this test coverage exists, we can safely refactor
validate_new_branchname() to use branch_checked_out().
Note that we need to prepend "refs/heads/" to the 'state.branch' after
calling wt_status_check_*(). We also need to duplicate wt->path so the
value is not freed at the end of the call.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The validate_new_branchname() method contains a check to see if a branch
is checked out in any non-bare worktree. This is intended to prevent a
force push that will mess up an existing checkout. This helper is not
suitable to performing just that check, because the method will die()
when the branch is checked out instead of returning an error code.
Create a new branch_checked_out() helper that performs the most basic
form of this check. To ensure we can call branch_checked_out() in a loop
with good performance, do a single preparation step that iterates over
all worktrees and stores their current HEAD branches in a strmap. The
branch_checked_out() helper can then discover these branches using a
hash lookup.
This helper is currently missing some key functionality. Namely: it
doesn't look for active rebases or bisects which mean that the branch is
"checked out" even though HEAD doesn't point to that ref. This
functionality will be added in a coming change.
We could use branch_checked_out() in validate_new_branchname(), but this
missing functionality would be a regression. However, we have no tests
that cover this case!
Add a new test script that will be expanded with these cross-worktree
ref updates. The current tests would still pass if we refactored
validate_new_branchname() to use this version of branch_checked_out().
The next change will fix that functionality and add the proper test
coverage.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue that existed before 0527ccb1b5 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc8 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0 (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Test Summary Report
-------------------
./t3701-add-interactive.sh (Wstat: 0 Tests: 70 Failed: 0)
TODO passed: 45, 47
Files=1, Tests=70, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.33 csys = 1.22 CPU)
Result: PASS
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b5 with a
new "ADD_I_USE_BUILTIN" prerequisite.
1. https://lore.kernel.org/git/patch-1.7-4624abc2591-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "fetch.credentialsInUrl" configuration variable controls what
happens when a URL with embedded login credential is used.
* ds/credentials-in-url:
remote: create fetch.credentialsInUrl config
Updating the graft information invalidates the list of parents of
in-core commit objects that used to be in the graft file.
* jt/unparse-commit-upon-graft-change:
commit,shallow: unparse commits if grafts changed
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
Make use of the stream_loose_object() function introduced in the
preceding commit to unpack large objects. Before this we'd need to
malloc() the size of the blob before unpacking it, which could cause
OOM with very large blobs.
We could use the new streaming interface to unpack all blobs, but
doing so would be much slower, as demonstrated e.g. with this
benchmark using git-hyperfine[0]:
rm -rf /tmp/scalar.git &&
git clone --bare https://github.com/Microsoft/scalar.git /tmp/scalar.git &&
mv /tmp/scalar.git/objects/pack/*.pack /tmp/scalar.git/my.pack &&
git hyperfine \
-r 2 --warmup 1 \
-L rev origin/master,HEAD -L v "10,512,1k,1m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/scalar.git/my.pack'
Here we'll perform worse with lower core.bigFileThreshold settings
with this change in terms of speed, but we're getting lower memory use
in return:
Summary
'./git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master' ran
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.02 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.02 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.09 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.10 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.11 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
A better benchmark to demonstrate the benefits of that this one, which
creates an artificial repo with a 1, 25, 50, 75 and 100MB blob:
rm -rf /tmp/repo &&
git init /tmp/repo &&
(
cd /tmp/repo &&
for i in 1 25 50 75 100
do
dd if=/dev/urandom of=blob.$i count=$(($i*1024)) bs=1024
done &&
git add blob.* &&
git commit -mblobs &&
git gc &&
PACK=$(echo .git/objects/pack/pack-*.pack) &&
cp "$PACK" my.pack
) &&
git hyperfine \
--show-output \
-L rev origin/master,HEAD -L v "512,50m,100m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum'
Using this test we'll always use >100MB of memory on
origin/master (around ~105MB), but max out at e.g. ~55MB if we set
core.bigFileThreshold=50m.
The relevant "Maximum resident set size" lines were manually added
below the relevant benchmark:
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master' ran
Maximum resident set size (kbytes): 107080
1.02 ± 0.78 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 106968
1.09 ± 0.79 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 107032
1.42 ± 1.07 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 107072
1.83 ± 1.02 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 55704
2.16 ± 1.19 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 4564
This shows that if you have enough memory this new streaming method is
slower the lower you set the streaming threshold, but the benefit is
more bounded memory use.
An earlier version of this patch introduced a new
"core.bigFileStreamingThreshold" instead of re-using the existing
"core.bigFileThreshold" variable[1]. As noted in a detailed overview
of its users in [2] using it has several different meanings.
Still, we consider it good enough to simply re-use it. While it's
possible that someone might want to e.g. consider objects "small" for
the purposes of diffing but "big" for the purposes of writing them
such use-cases are probably too obscure to worry about. We can always
split up "core.bigFileThreshold" in the future if there's a need for
that.
0. https://github.com/avar/git-hyperfine/
1. https://lore.kernel.org/git/20211210103435.83656-1-chiyutianyi@gmail.com/
2. https://lore.kernel.org/git/20220120112114.47618-5-chiyutianyi@gmail.com/
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the name implies, "get_data(size)" will allocate and return a given
amount of memory. Allocating memory for a large blob object may cause the
system to run out of memory. Before preparing to replace calling of
"get_data()" to unpack large blob objects in latter commits, refactor
"get_data()" to reduce memory footprint for dry_run mode.
Because in dry_run mode, "get_data()" is only used to check the
integrity of data, and the returned buffer is not used at all, we can
allocate a smaller buffer and use it as zstream output. Make the function
return NULL in the dry-run mode, as no callers use the returned buffer.
The "find [...]objects/?? -type f | wc -l" test idiom being used here
is adapted from the same "find" use added to another test in
d9545c7f46 (fast-import: implement unpack limit, 2016-04-25).
Suggested-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
A misconfigured 'branch..remote' led to a bug in configuration
parsing.
* gc/zero-length-branch-config-fix:
remote.c: reject 0-length branch names
remote.c: don't BUG() on 0-length branch names
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
Because of the wrapping of the branch name variable $b, the colour codes
in the variable don't get applied, but are instead printed directly in
the output. Move the wrapping of $b to before colour codes are inserted
to correct this. Revert move of branch name colour codes in tests, as
the branch name is now coloured after the wrapping instead of before.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve-undo extension was added to the index in cfc5789a
(resolve-undo: record resolved conflicts in a new index extension
section, 2009-12-25). This extension records the blob object names
and their modes of conflicted paths when the path gets resolved
(e.g. with "git add"), to allow "undoing" the resolution with
"checkout -m path". These blob objects should be guarded from
garbage-collection while we have the resolve-undo information in the
index (otherwise unresolve operation may try to use a blob object
that has already been pruned away).
But the code called from mark_reachable_objects() for the index
forgets to do so. Teach add_index_objects_to_pending() helper to
also add objects referred to by the resolve-undo extension.
Also make matching changes to "fsck", which has code that is fairly
similar to the reachability stuff, but have parallel implementations
for all these stuff, which may (or may not) someday want to be unified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
source: <20220421044233.894255-1-alexhenrie24@gmail.com>
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
Avoid problems from interaction between malloc_check and address
sanitizer.
source: <pull.1210.git.1649507317350.gitgitgadget@gmail.com>
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
The commit summary shown after making a commit is matched to what
is given in "git status" not to use the break-rewrite heuristics.
source: <c35bd0aa-2e46-e710-2b39-89f18bad0097@web.de>
* rs/commit-summary-wo-break-rewrite:
commit, sequencer: turn off break_opt for commit summary
A bit of test framework fixes with a few fixes to issues found by
valgrind.
source: <20220512223218.237544-1-gitster@pobox.com>
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
source: <xmqqh76mf7s4.fsf_-_@gitster.g>
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
Test that "git config --show-scope" shows the "worktree" scope, and add
it to the list of scopes in Documentation/git-config.txt.
"git config --help" does not need to be updated because it already
mentions "worktree".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A git subcommand like "git add -p" spawns a separate git process
while relaying its command line arguments. A pathspec with only
negative elements was mistakenly passed with an empty string, which
has been corrected.
* jc/all-negative-pathspec:
pathspec: correct an empty string used as a pathspec element
Implementation of "scalar diagnose" subcommand.
* js/scalar-diagnose:
scalar: teach `diagnose` to gather loose objects information
scalar: teach `diagnose` to gather packfile info
scalar diagnose: include disk space information
scalar: implement `scalar diagnose`
scalar: validate the optional enlistment argument
archive --add-virtual-file: allow paths containing colons
archive: optionally add "virtual" files
Update the GitHub workflow support to make it quicker to get to the
failing test.
* js/ci-github-workflow-markup:
ci: call `finalize_test_case_output` a little later
ci(github): mention where the full logs can be found
ci: use `--github-workflow-markup` in the GitHub workflow
ci(github): avoid printing test case preamble twice
ci(github): skip the logs of the successful test cases
ci: optionally mark up output in the GitHub workflow
ci/run-build-and-tests: add some structure to the GitHub workflow output
ci: make it easier to find failed tests' logs in the GitHub workflow
ci/run-build-and-tests: take a more high-level view
test(junit): avoid line feeds in XML attributes
tests: refactor --write-junit-xml code
ci: fix code style
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
Fix a regression reported[1] against f443246b9f (commit: convert
{pre-commit,prepare-commit-msg} hook to hook.h, 2021-12-22): Due to
using the run_process_parallel() API in the earlier 96e7225b31 (hook:
add 'run' subcommand, 2021-12-22) we'd capture the hook's stderr and
stdout, and thus lose the connection to the TTY in the case of
e.g. the "pre-commit" hook.
As a preceding commit notes GNU parallel's similar --ungroup option
also has it emit output faster. While we're unlikely to have hooks
that emit truly massive amounts of output (or where the performance
thereof matters) it's still informative to measure the overhead. In a
similar "seq" test we're now ~30% faster:
$ cat .git/hooks/seq-hook; git hyperfine -L rev origin/master,HEAD~0 -s 'make CFLAGS=-O3' './git hook run seq-hook'
#!/bin/sh
seq 100000000
Benchmark 1: ./git hook run seq-hook' in 'origin/master
Time (mean ± σ): 787.1 ms ± 13.6 ms [User: 701.6 ms, System: 534.4 ms]
Range (min … max): 773.2 ms … 806.3 ms 10 runs
Benchmark 2: ./git hook run seq-hook' in 'HEAD~0
Time (mean ± σ): 603.4 ms ± 1.6 ms [User: 573.1 ms, System: 30.3 ms]
Range (min … max): 601.0 ms … 606.2 ms 10 runs
Summary
'./git hook run seq-hook' in 'HEAD~0' ran
1.30 ± 0.02 times faster than './git hook run seq-hook' in 'origin/master'
1. https://lore.kernel.org/git/CA+dzEBn108QoMA28f0nC8K21XT+Afua0V2Qv8XkR8rAeqUCCZw@mail.gmail.com/
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
[jc: minor fix-up to tests for consistency]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the parallel execution API added in c553c72eed (run-command:
add an asynchronous parallel child processor, 2015-12-15) to support a
mode where the stdout and stderr of the processes isn't captured and
output in a deterministic order, instead we'll leave it to the kernel
and stdio to sort it out.
This gives the API same functionality as GNU parallel's --ungroup
option. As we'll see in a subsequent commit the main reason to want
this is to support stdout and stderr being connected to the TTY in the
case of jobs=1, demonstrated here with GNU parallel:
$ parallel --ungroup 'test -t {} && echo TTY || echo NTTY' ::: 1 2
TTY
TTY
$ parallel 'test -t {} && echo TTY || echo NTTY' ::: 1 2
NTTY
NTTY
Another is as GNU parallel's documentation notes a potential for
optimization. As demonstrated in next commit our results with "git
hook run" will be similar, but generally speaking this shows that if
you want to run processes in parallel where the exact order isn't
important this can be a lot faster:
$ hyperfine -r 3 -L o ,--ungroup 'parallel {o} seq ::: 10000000 >/dev/null '
Benchmark 1: parallel seq ::: 10000000 >/dev/null
Time (mean ± σ): 220.2 ms ± 9.3 ms [User: 124.9 ms, System: 96.1 ms]
Range (min … max): 212.3 ms … 230.5 ms 3 runs
Benchmark 2: parallel --ungroup seq ::: 10000000 >/dev/null
Time (mean ± σ): 154.7 ms ± 0.9 ms [User: 136.2 ms, System: 25.1 ms]
Range (min … max): 153.9 ms … 155.7 ms 3 runs
Summary
'parallel --ungroup seq ::: 10000000 >/dev/null ' ran
1.42 ± 0.06 times faster than 'parallel seq ::: 10000000 >/dev/null '
A large part of the juggling in the API is to make the API safer for
its maintenance and consumers alike.
For the maintenance of the API we e.g. avoid malloc()-ing the
"pp->pfd", ensuring that SANITIZE=address and other similar tools will
catch any unexpected misuse.
For API consumers we take pains to never pass the non-NULL "out"
buffer to an API user that provided the "ungroup" option. The
resulting code in t/helper/test-run-command.c isn't typical of such a
user, i.e. they'd typically use one mode or the other, and would know
whether they'd provided "ungroup" or not.
We could also avoid the strbuf_init() for "buffered_output" by having
"struct parallel_processes" use a static PARALLEL_PROCESSES_INIT
initializer, but let's leave that cleanup for later.
Using a global "run_processes_parallel_ungroup" variable to enable
this option is rather nasty, but is being done here to produce as
minimal of a change as possible for a subsequent regression fix. This
change is extracted from a larger initial version[1] which ends up
with a better end-state for the API, but in doing so needed to modify
all existing callers of the API. Let's defer that for now, and
narrowly focus on what we need for fixing the regression in the
subsequent commit.
It's safe to do this with a global variable because:
A) hook.c is the only user of it that sets it to non-zero, and before
we'll get any other API users we'll refactor away this method of
passing in the option, i.e. re-roll [1].
B) Even if hook.c wasn't the only user we don't have callers of this
API that concurrently invoke this parallel process starting API
itself in parallel.
As noted above "A" && "B" are rather nasty, and we don't want to live
with those caveats long-term, but for now they should be an acceptable
compromise.
1. https://lore.kernel.org/git/cover-v2-0.8-00000000000-20220518T195858Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short upstream state indicator inherits the colour of the last short
state indicator before it (if there is one), and the sparsity state
indicator inherits this colour as well. This behaviour was introduced by
0ec7c23cdc (git-prompt: make upstream state indicator location
consistent, 2022-02-27), while before this change the aforementioned
indicators were white/the default text colour. Some examples to
illustrate this behaviour (assuming all indicators are enabled and
colourization is on):
* If there is something in the stash, both the '$' and the short
upstream state indicator following it will be blue.
* If the local tree has new, untracked files and there is nothing in
the stash, both the '%' and the short upstream state indicator
will be red.
* If all local changes are added to the index and the stash is empty,
both the '+' and the short upstream state indicator following it will
be green.
* If the local tree is clean and there is nothing in the stash, the
short upstream state indicator will be white/${default text colour}.
This appears to be an unintended side-effect of the change, and makes
little sense semantically (e.g. why is it bad to be in sync with
upstream when you have uncommitted local changes?). The cause of the
change in colourization is that previously, the short upstream state
indicator appeared immediately after the rebase/revert/bisect/merge
state indicator (note the position of $p in $gitstring):
local f="$h$w$i$s$u"
local gitstring="$c$b${f:+$z$f}${sparse}$r$p"
Said indicator is prepended with the clear colour code, and the short
upstream state indicator is thus also uncoloured. Now, the short
upstream state indicator follows the sequence of colourized indicators,
without any clearing of colour (again note the position of $p, now in
$f):
local f="$h$w$i$s$u$p"
local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}"
If the user is in a sparse checkout, the sparsity state indicator
follows a similar pattern to the short upstream state indicator.
However, clearing colour of the colourized indicators changes how the
sparsity state indicator is colourized, as it currently inherits (and
before the change referenced also inherited) the colour of the last
short state indicator before it. Reading the commit message of the
change that introduced the sparsity state indicator, afda36dbf3
(git-prompt: include sparsity state as well, 2020-06-21), it appears
this colourization also was unintended, so clearing the colour for said
indicator further increases consistency.
Make the colourization of these state indicators consistent by making
all colourized indicators clear their own colour. Make colouring of $c
dependent on it not being empty, as it is no longer being used to colour
the branch name. Move clearing of $b's prefix to before colourization so
it gets cleared properly when colour codes are inserted into it. These
changes make changing the layout of the prompt less prone to unintended
colour changes in the future.
Change coloured Bash prompt tests to reflect the colourization changes:
* Move the colour codes to wrap the expected content of the expanded
$__git_ps1_branch_name in all tests.
* Insert a clear-colour code after the symbol for the first indicator
in "prompt - bash color pc mode - dirty status indicator - dirty
index and worktree", to reflect that all indicators should clear
their own colour.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After generating diffs for each range to be compared using a 'git log'
invocation, range-diff.c::read_patches looks for the "diff --git" header
in those diffs to recognize the beginning of a new change.
In a project with submodules, and with 'diff.submodule=log' set in the
config, this header is missing for the diff of a changed submodule, so
any submodule changes are quietly ignored in the range-diff.
When 'diff.submodule=diff' is set in the config, the "diff --git" header
is also missing for the submodule itself, but is shown for submodule
content changes, which can easily confuse 'git range-diff' and lead to
errors such as:
error: git apply: bad git-diff - inconsistent old filename on line 1
error: could not parse git header 'diff --git path/to/submodule/and/some/file/within
'
error: could not parse log for '@{u}..@{1}'
Force the submodule diff format to its default ("short") when invoking
'git log' to generate the patches for each range, such that submodule
changes are always detected.
Add a test, including an invocation with '--creation-factor=100' to
force the second commit in the range not to be considered a complete
rewrite, in order to verify we do indeed get the "short" format.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those tests that assumed that a .git/info directory would be
created for them when writing .git/info/sparse-checkout to explicitly
create the directory by setting "TEST_CREATE_REPO_NO_TEMPLATE=1"
before sourcing test-lib.sh, and using the "--template=" argument to
"git clone".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those tests that assumed that a .git/info directory would be
created for them when writing .git/info/exclude to explicitly create
the directory by setting "TEST_CREATE_REPO_NO_TEMPLATE=1" before
sourcing test-lib.sh, and using the "--template=" argument to "git
clone" and "git init".
In the case of ".git/modules/sub1/info" we deviate from the
established pattern in this and preceding commits of passing a
"--template=" and doing a "mkdir .git/info".
In that case "git checkout" will run the "submodule--helper clone",
and both e.g. "git submodule update --init" and "git checkout" do not
have a way to pass down options to the eventual "git init" or "git
clone". Let's instead assume that the submodule was populated with our
default templates, remove them, and then run the "mkdir".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those tests that assumed that a .git/info directory would be
created for them when writing .git/info/refs to explicitly create the
directory by using the "--template=" argument to "git init".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those tests that assumed that a .git/info directory would be
created for them when writing .git/info/attributes to explicitly
create the directory by setting "TEST_CREATE_REPO_NO_TEMPLATE=1"
before sourcing test-lib.sh, and using the "--template=" argument to
"git clone".
The change here in here in t7814-grep-recurse-submodules.sh would
continue "succeeding" with only the "TEST_CREATE_REPO_NO_TEMPLATE=1"
part of this change. That's because those tests use
"test_expect_failure", so they'd "pass" without this change, as
"test_expect_failure" by design isn't discerning about what failure
conditions it'll accept.
But as we're fixing these sorts of issues across the test suite let's
fix this one too. This issue was spotted with a local merge with
another topic of mine[1], which introduces a stricter alternative to
"test_expect_failure".
1. https://lore.kernel.org/git/cover-0.7-00000000000-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those tests that assumed that a .git/info directory would be
created for them when writing .git/info/grafts to explicitly create
the directory.
Do this using the new "TEST_CREATE_REPO_NO_TEMPLATE" facility, and use
"mkdir" instead of "mkdir -p" to assert that we don't have the
.git/info already. An exception to this is the "with grafts" test in
"t6001-rev-list-graft.sh". There we're modifying our ".git" state in a
for-loop, in lieu of refactoring that more extensively let's use
"mkdir -p" there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in c8a58ac5a5 (Revert "Don't create the $GIT_DIR/branches
directory on init", 2009-10-31) there was an attempt long ago in
0cc5691a8b (Don't create the $GIT_DIR/branches directory on init,
2009-10-30) to get rid of the legacy "branches" directory.
We should probably get rid of its creation by removing the
"templates/branches--" file. But whatever our default behavior, our
tests should be tightened up to explicitly create the .git/branches
directory if they rely on our default templates, to make the
dependency on those templates clear.
So let's amend the two tests that would fail if .git/branches wasn't
created. To do this introduce a new "TEST_CREATE_REPO_NO_TEMPLATE"
variable, which we'll set before sourcing test-lib.sh, and change the
"git clone" and "git init" commands in the tests themselves to
explicitly pass "--template=".
This way they won't get a .git/branches in either their top-level
.git, or in the ones they create. We can then amend the tests that
rely on the ".git/branches" directory existing to create it
explicitly, and to remove it after its creation.
This new "TEST_CREATE_REPO_NO_TEMPLATE" variable is a less
heavy-handed version of the "NO_SET_GIT_TEMPLATE_DIR" variable. See
a94d305bf8 (t/t0001-init.sh: add test for 'init with init.templatedir
set', 2010-02-26) for its implementation.
Unlike "TEST_CREATE_REPO_NO_TEMPLATE", this new
"TEST_CREATE_REPO_NO_TEMPLATE" variable is narrowly scoped to what the
"git init" in test-lib.sh does, as opposed to the global effect of
"NO_SET_GIT_TEMPLATE_DIR" and the setting of "GIT_TEMPLATE_DIR" in
wrap-for-bin.sh.
I experimented with adding a new "GIT_WRAP_FOR_BIN_VIA_TEST_LIB"
variable set in test-lib.sh, which would cause wrap-for-bin.sh to not
set GIT_TEMPLATE_DIR, GITPERLLIB etc, as we set those in
test-lib.sh. I think that's a viable approach, but it would interact
e.g. with the appending feature of GITPERLLIB added in
8bade1e12e (wrap-for-bin: make bin-wrappers chainable, 2013-07-04).
Doing so would allow us to convert the tests in t0001-init.sh that now
use "NO_SET_GIT_TEMPLATE_DIR" to simply unset "GIT_TEMPLATE_DIR" in a
sub-shell before invoking "git init" or "git clone". I think that
approach is worth pursuing, but let's table it for now. Some future
wrap-for-bin.sh refactoring can try to address it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a test added in 368aa52952 (add git-check-ignore sub-command,
2013-01-06) to clobber .git/info/exclude rather than append to
it.
These tests would break if the "templates/info--exclude" file added in
d3af621b14 (Redo the templates generation and installation.,
2005-08-06) wasn't exactly 6 lines (of only comments).
Let's instead clobber the default .git/info/excludes file, and test
only our own expected content. This is not strictly needed for
anything in this series, but is a good cleanup while we're at it.
As discussed in the preceding commit a lot of things depend on the
"info" directory being created, but this was the only test that relied
on the specific content in the "templates/info--exclude" file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit is parsed, it pretends to have a different (possibly
empty) list of parents if there is graft information for that commit.
But there is a bug that could occur when a commit is parsed, the graft
information is updated (for example, when a shallow file is rewritten),
and the same commit is subsequently used: the parents of the commit do
not conform to the updated graft information, but the information at the
time of parsing.
This is usually not an issue, as a commit is usually introduced into the
repository at the same time as its graft information. That means that
when we try to parse that commit, we already have its graft information.
But it is an issue when fetching a shallow point directly into a
repository with submodules. The function
assign_shallow_commits_to_refs() parses all sought objects (including
the shallow point, which we are directly fetching). In update_shallow()
in fetch-pack.c, assign_shallow_commits_to_refs() is called before
commit_shallow_file(), which means that the shallow point would have
been parsed before graft information is updated. Once a commit is
parsed, it is no longer sensitive to any graft information updates. This
parsed commit is subsequently used when we do a revision walk to search
for submodules to fetch, meaning that the commit is considered to have
parents even though it is a shallow point (and therefore should be
treated as having no parents).
Therefore, whenever graft information is updated, mark the commits that
were previously grafts and the commits that are newly grafts as
unparsed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users sometimes provide a "username:password" combination in their
plaintext URLs. Since Git stores these URLs in plaintext in the
.git/config file, this is a very insecure way of storing these
credentials. Credential managers are a more secure way of storing this
information.
System administrators might want to prevent this kind of use by users on
their machines.
Create a new "fetch.credentialsInUrl" config option and teach Git to
warn or die when seeing a URL with this kind of information. The warning
anonymizes the sensitive information of the URL to be clear about the
issue.
This change currently defaults the behavior to "allow" which does
nothing with these URLs. We can consider changing this behavior to
"warn" by default if we wish. At that time, we may want to add some
advice about setting fetch.credentialsInUrl=ignore for users who still
want to follow this pattern (and not receive the warning).
An earlier version of this change injected the logic into
url_normalize() in urlmatch.c. While most code paths that parse URLs
eventually normalize the URL, that normalization does not happen early
enough in the stack to avoid attempting connections to the URL first. By
inserting a check into the remote validation, we identify the issue
before making a connection. In the old code path, this was revealed by
testing the new t5601-clone.sh test under --stress, resulting in an
instance where the return code was 13 (SIGPIPE) instead of 128 from the
die().
However, we can reuse the parsing information from url_normalize() in
order to benefit from its well-worn parsing logic. We can use the struct
url_info that is created in that method to replace the password with
"<redacted>" in our error messages. This comes with a slight downside
that the normalized URL might look slightly different from the input URL
(for instance, the normalized version adds a closing slash). This should
not hinder users figuring out what the problem is and being able to fix
the issue.
As an attempt to ensure the parsing logic did not catch any
unintentional cases, I modified this change locally to to use the "die"
option by default. Running the test suite succeeds except for the
explicit username:password URLs used in t5550-http-fetch-dumb.sh and
t5541-http-push-smart.sh. This means that all other tested URLs did not
trigger this logic.
The tests show that the proper error messages appear (or do not
appear), but also count the number of error messages. When only warning,
each process validates the remote URL and outputs a warning. This
happens twice for clone, three times for fetch, and once for push.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to pack unreachable objects into a "cruft pack",
instead of ejecting them into loose form to be reclaimed later, has
been introduced.
* tb/cruft-packs:
sha1-file.c: don't freshen cruft packs
builtin/gc.c: conditionally avoid pruning objects via loose
builtin/repack.c: add cruft packs to MIDX during geometric repack
builtin/repack.c: use named flags for existing_packs
builtin/repack.c: allow configuring cruft pack generation
builtin/repack.c: support generating a cruft pack
builtin/pack-objects.c: --cruft with expiration
reachable: report precise timestamps from objects in cruft packs
reachable: add options to add_unseen_recent_objects_to_traversal
builtin/pack-objects.c: --cruft without expiration
builtin/pack-objects.c: return from create_object_entry()
t/helper: add 'pack-mtimes' test-tool
pack-mtimes: support writing pack .mtimes files
chunk-format.h: extract oid_version()
pack-write: pass 'struct packing_data' to 'stage_tmp_packfiles'
pack-mtimes: support reading .mtimes files
Documentation/technical: add cruft-packs.txt
Teach "git repack --geometric" work better with "--keep-pack" and
avoid corrupting the repository when packsize limit is used.
* tb/geom-repack-with-keep-and-max:
builtin/repack.c: ensure that `names` is sorted
t7703: demonstrate object corruption with pack.packSizeLimit
repack: respect --keep-pack with geometric repack
"sparse-checkout" learns to work well with the sparse-index
feature.
* ds/sparse-sparse-checkout:
sparse-checkout: integrate with sparse index
p2000: add test for 'git sparse-checkout [add|set]'
sparse-index: complete partial expansion
sparse-index: partially expand directories
sparse-checkout: --no-sparse-index needs a full index
cache-tree: implement cache_tree_find_path()
sparse-index: introduce partially-sparse indexes
sparse-index: create expand_index()
t1092: stress test 'git sparse-checkout set'
t1092: refactor 'sparse-index contents' test
