The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
When we're in batch mode, we end up in batch_object_write()
for each object, which allocates its own strbuf for each
call. Instead, we can provide a single "scratch" buffer that
gets reused for each output. When running:
git cat-file --batch-all-objects --batch-check='%(objectname)'
on git.git, my best-of-five time drops from:
real 0m0.171s
user 0m0.159s
sys 0m0.012s
to:
real 0m0.133s
user 0m0.121s
sys 0m0.012s
Note that we could do this just by putting the "scratch"
pointer into "struct expand_data", but I chose instead to
add an extra parameter to the callstack. That's more
verbose, but it makes it a bit more obvious what is going
on, which in turn makes it easy to see where we need to be
releasing the string in the caller (right after the loop
which uses it in each case).
Based-on-a-patch-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the "buf" strbuf for two things: to read incoming
lines, and as a scratch space for test-expanding the
user-provided format. Let's split this into two variables
with descriptive names, which makes their purpose and
lifetime more clear.
It will also help in a future patch when we start using the
"output" buffer for more expansions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to check if the oidset has our object before
we insert it; that's done as part of the insertion. We can
just rely on the return value from oidset_insert(), which
saves one hash lookup per object.
This measurable speedup is tiny and within the run-to-run
noise, but the result is simpler to read, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the convert API take an index_state instead of assuming the_index
in convert.c. All external call sites are converted blindly to keep
the patch simple and retain current behavior. Individual call sites
may receive further updates to use the right index instead of
the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you're going to access the contents of every object in a
packfile, it's generally much more efficient to do so in
pack order, rather than in hash order. That increases the
locality of access within the packfile, which in turn is
friendlier to the delta base cache, since the packfile puts
related deltas next to each other. By contrast, hash order
is effectively random, since the sha1 has no discernible
relationship to the content.
This patch introduces an "--unordered" option to cat-file
which iterates over packs in pack-order under the hood. You
can see the results when dumping all of the file content:
$ time ./git cat-file --batch-all-objects --buffer --batch | wc -c
6883195596
real 0m44.491s
user 0m42.902s
sys 0m5.230s
$ time ./git cat-file --unordered \
--batch-all-objects --buffer --batch | wc -c
6883195596
real 0m6.075s
user 0m4.774s
sys 0m3.548s
Same output, different order, way faster. The same speed-up
applies even if you end up accessing the object content in a
different process, like:
git cat-file --batch-all-objects --buffer --batch-check |
grep blob |
git cat-file --batch='%(objectname) %(rest)' |
wc -c
Adding "--unordered" to the first command drops the runtime
in git.git from 24s to 3.5s.
Side note: there are actually further speedups available
for doing it all in-process now. Since we are outputting
the object content during the actual pack iteration, we
know where to find the object and could skip the extra
lookup done by oid_object_info(). This patch stops short
of that optimization since the underlying API isn't ready
for us to make those sorts of direct requests.
So if --unordered is so much better, why not make it the
default? Two reasons:
1. We've promised in the documentation that --batch-all-objects
outputs in hash order. Since cat-file is plumbing,
people may be relying on that default, and we can't
change it.
2. It's actually _slower_ for some cases. We have to
compute the pack revindex to walk in pack order. And
our de-duplication step uses an oidset, rather than a
sort-and-dedup, which can end up being more expensive.
If we're just accessing the type and size of each
object, for example, like:
git cat-file --batch-all-objects --buffer --batch-check
my best-of-five warm cache timings go from 900ms to
1100ms using --unordered. Though it's possible in a
cold-cache or under memory pressure that we could do
better, since we'd have better locality within the
packfile.
And one final question: why is it "--unordered" and not
"--pack-order"? The answer is again two-fold:
1. "pack order" isn't a well-defined thing across the
whole set of objects. We're hitting loose objects, as
well as objects in multiple packs, and the only
ordering we're promising is _within_ a single pack. The
rest is apparently random.
2. The point here is optimization. So we don't want to
promise any particular ordering, but only to say that
we will choose an ordering which is likely to be
efficient for accessing the object content. That leaves
the door open for further changes in the future without
having to add another compatibility option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're not really doing the batch-show operation in these
callbacks, but just collecting the set of objects. That
distinction will become more important in a future patch, so
let's rename them now to avoid cluttering that diff.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow oid_object_info_extended callers
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert read_object_with_reference to take pointers to struct object_id.
Update the internals of the function accordingly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach sha1_file to fetch objects from the remote configured in
extensions.partialclone whenever an object is requested but missing.
The fetching of objects can be suppressed through a global variable.
This is used by fsck and index-pack.
However, by default, such fetching is not suppressed. This is meant as a
temporary measure to ensure that all Git commands work in such a
situation. Future patches will update some commands to either tolerate
missing objects (without fetching them) or be more efficient in fetching
them.
In order to determine the code changes in sha1_file.c necessary, I
investigated the following:
(1) functions in sha1_file.c that take in a hash, without the user
regarding how the object is stored (loose or packed)
(2) functions in packfile.c (because I need to check callers that know
about the loose/packed distinction and operate on both differently,
and ensure that they can handle the concept of objects that are
neither loose nor packed)
(1) is handled by the modification to sha1_object_info_extended().
For (2), I looked at for_each_packed_object and others. For
for_each_packed_object, the callers either already work or are fixed in
this patch:
- reachable - only to find recent objects
- builtin/fsck - already knows about missing objects
- builtin/cat-file - warning message added in this commit
Callers of the other functions do not need to be changed:
- parse_pack_index
- http - indirectly from http_get_info_packs
- find_pack_entry_one
- this searches a single pack that is provided as an argument; the
caller already knows (through other means) that the sought object
is in a specific pack
- find_sha1_pack
- fast-import - appears to be an optimization to not store a file if
it is already in a pack
- http-walker - to search through a struct alt_base
- http-push - to search through remote packs
- has_sha1_pack
- builtin/fsck - already knows about promisor objects
- builtin/count-objects - informational purposes only (check if loose
object is also packed)
- builtin/prune-packed - check if object to be pruned is packed (if
not, don't prune it)
- revision - used to exclude packed objects if requested by user
- diff - just for optimization
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths have been updated to squelch -Wimplicit-fallthrough
warnings from Gcc 7 (which is a good code hygiene).
* jk/fallthrough:
consistently use "fallthrough" comments in switches
curl_trace(): eliminate switch fallthrough
test-line-buffer: simplify command parsing
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.
There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).
Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).
This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dc944b65f1 (get_sha1_with_context: dynamically
allocate oc->path, 2017-05-19) changed the rules that
callers must follow for seeing if we parsed a path in the
object name. The rules switched from "check if the oc.path
buffer is empty" to "check if the oc.path pointer is NULL".
But that commit forgot to update some sites in
cat_one_file(), meaning we might dereference a NULL pointer.
You can see this by making a path-aware request like
--textconv without specifying --path, and giving an object
name that doesn't have a path in it. Like:
git cat-file --textconv HEAD
which will reliably segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the flags for get_oid_with_context and friends to use "OID"
instead of "SHA1" in their names.
This transform was made by running the following one-liner on the
affected files:
perl -pi -e 's/GET_SHA1/GET_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
The LOOKUP_REPLACE_OBJECT flag controls whether the
lookup_replace_object() function is invoked by
sha1_object_info_extended(), read_sha1_file_extended(), and
lookup_replace_object_extended(), but it is not immediately clear which
functions accept that flag.
Therefore restrict this flag to only sha1_object_info_extended(),
renaming it appropriately to OBJECT_INFO_LOOKUP_REPLACE and adding some
documentation. Update read_sha1_file_extended() to have a boolean
parameter instead, and delete lookup_replace_object_extended().
parse_sha1_header() also passes this flag to
parse_sha1_header_extended() since commit 46f0344 ("sha1_file: support
reading from a loose object of unknown type", 2015-05-03), but that has
had no effect since that commit. Therefore this patch also removes this
flag from that invocation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The LOOKUP_UNKNOWN_OBJECT flag was introduced in commit 46f0344
("sha1_file: support reading from a loose object of unknown type",
2015-05-03) in order to support a feature in cat-file subsequently
introduced in commit 39e4ae3 ("cat-file: teach cat-file a
'--allow-unknown-type' option", 2015-05-03). Despite its name and
location in cache.h, this flag is used neither in
read_sha1_file_extended() nor in any of the lookup functions, but used
only in sha1_object_info_extended().
Therefore rename this flag to OBJECT_INFO_ALLOW_UNKNOWN_TYPE, taking the
name of the cat-file flag that invokes this feature, and move it closer
to the declaration of sha1_object_info_extended(). Also add
documentation for this flag.
OBJECT_INFO_ALLOW_UNKNOWN_TYPE is defined to 2, not 1, to avoid
conflicting with LOOKUP_REPLACE_OBJECT. Avoidance of this conflict is
necessary because sha1_object_info_extended() supports both flags.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal logic used in "git blame" has been libified to make it
easier to use by cgit.
* js/blame-lib: (29 commits)
blame: move entry prepend to libgit
blame: move scoreboard setup to libgit
blame: move scoreboard-related methods to libgit
blame: move fake-commit-related methods to libgit
blame: move origin-related methods to libgit
blame: move core structures to header
blame: create entry prepend function
blame: create scoreboard setup function
blame: create scoreboard init function
blame: rework methods that determine 'final' commit
blame: wrap blame_sort and compare_blame_final
blame: move progress updates to a scoreboard callback
blame: make sanity_check use a callback in scoreboard
blame: move no_whole_file_rename flag to scoreboard
blame: move xdl_opts flags to scoreboard
blame: move show_root flag to scoreboard
blame: move reverse flag to scoreboard
blame: move contents_from to scoreboard
blame: move copy/move thresholds to scoreboard
blame: move stat counters to scoreboard
...
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
textconv_object is used in places other than blame.c and should be moved
to a more appropriate location. Other textconv related functions are
located in diff.c so that seems as good a place as any.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a sha1 lookup returns the tree path via "struct
object_context", it just copies it into a fixed-size buffer.
This means the result can be truncated, and it means our
"struct object_context" consumes a lot of stack space.
Instead, let's allocate a string on the heap. Because most
callers don't care about this information, we'll avoid doing
it by default (so they don't all have to start calling
free() on the result). There are basically two options for
the caller to signal to us that it's interested:
1. By setting a pointer to storage in the object_context.
2. By passing a flag in another parameter.
Doing (1) would match the way that sha1_object_info_extended()
works. But it would mean that every caller would have to
initialize the object_context, which they don't currently
have to do.
This patch does (2), and adds a new bit to the function's
flags field. All of the callers that look at the "path"
field are updated to pass the new flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert each_loose_object_fn and each_packed_object_fn to take a pointer
to struct object_id. Update the various callbacks. Convert several
40-based constants to use GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
The callbacks for iterating a sha1_array must have a void
return. This is unlike our usual for_each semantics, where
a callback may interrupt iteration and have its value
propagated. Let's switch it to the usual form, which will
enable its use in more places (e.g., where we are replacing
an existing iteration with a different data structure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git hash-objects", which is a tool to take an
on-filesystem data stream and put it into the Git object store,
allowed to perform the "outside-world-to-Git" conversions (e.g.
end-of-line conversions and application of the clean-filter), and
it had the feature on by default from very early days, its reverse
operation "git cat-file", which takes an object from the Git object
store and externalize for the consumption by the outside world,
lacked an equivalent mechanism to run the "Git-to-outside-world"
conversion. The command learned the "--filters" option to do so.
* js/cat-file-filters:
cat-file: support --textconv/--filters in batch mode
cat-file --textconv/--filters: allow specifying the path separately
cat-file: introduce the --filters option
cat-file: fix a grammo in the man page
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
With this patch, --batch can be combined with --textconv or --filters.
For this to work, the input needs to have the form
<object name><single white space><path>
so that the filters can be chosen appropriately.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are circumstances when it is relatively easy to figure out the
object name for a given path, but not the name of the containing tree.
For example, when looking at a diff generated by Git, the object names
are recorded, but not the revision. As a matter of fact, the revisions
from which the diff was generated may not even exist locally.
In such a case, the user would have to generate a fake revision just to
be able to use --textconv or --filters.
Let's simplify this dramatically, because we do not really need that
revision at all: all we care about is that we know the path. In the
scenario described above, we do know the path, and we just want to
specify it separately from the object name.
Example usage:
git cat-file --textconv --path=main.c 0f1937fd
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --filters option applies the convert_to_working_tree() filter for
the path when showing the contents of a regular file blob object;
the contents are written out as-is for other types of objects.
This feature comes in handy when a 3rd-party tool wants to work with
the contents of files from past revisions as if they had been checked
out, but without detouring via temporary files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the style a little more consistent with other usage strings,
and will resolve a warning at
https://www.softcatala.org/recursos/quality/git.html
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, modify stream_blob_to_fd to
take a struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
