The current --topo-order algorithm requires walking all
reachable commits up front, topo-sorting them, all before
outputting the first value. This patch introduces a new
algorithm which uses stored generation numbers to
incrementally walk in topo-order, outputting commits as
we go. This can dramatically reduce the computation time
to write a fixed number of commits, such as when limiting
with "-n <N>" or filling the first page of a pager.
When running a command like 'git rev-list --topo-order HEAD',
Git performed the following steps:
1. Run limit_list(), which parses all reachable commits,
adds them to a linked list, and distributes UNINTERESTING
flags. If all unprocessed commits are UNINTERESTING, then
it may terminate without walking all reachable commits.
This does not occur if we do not specify UNINTERESTING
commits.
2. Run sort_in_topological_order(), which is an implementation
of Kahn's algorithm. It first iterates through the entire
set of important commits and computes the in-degree of each
(plus one, as we use 'zero' as a special value here). Then,
we walk the commits in priority order, adding them to the
priority queue if and only if their in-degree is one. As
we remove commits from this priority queue, we decrement the
in-degree of their parents.
3. While we are peeling commits for output, get_revision_1()
uses pop_commit on the full list of commits computed by
sort_in_topological_order().
In the new algorithm, these three steps correspond to three
different commit walks. We run these walks simultaneously,
and advance each only as far as necessary to satisfy the
requirements of the 'higher order' walk. We know when we can
pause each walk by using generation numbers from the commit-
graph feature.
Recall that the generation number of a commit satisfies:
* If the commit has at least one parent, then the generation
number is one more than the maximum generation number among
its parents.
* If the commit has no parent, then the generation number is one.
There are two special generation numbers:
* GENERATION_NUMBER_INFINITY: this value is 0xffffffff and
indicates that the commit is not stored in the commit-graph and
the generation number was not previously calculated.
* GENERATION_NUMBER_ZERO: this value (0) is a special indicator
to say that the commit-graph was generated by a version of Git
that does not compute generation numbers (such as v2.18.0).
Since we use generation_numbers_enabled() before using the new
algorithm, we do not need to worry about GENERATION_NUMBER_ZERO.
However, the existence of GENERATION_NUMBER_INFINITY implies the
following weaker statement than the usual we expect from
generation numbers:
If A and B are commits with generation numbers gen(A) and
gen(B) and gen(A) < gen(B), then A cannot reach B.
Thus, we will walk in each of our stages until the "maximum
unexpanded generation number" is strictly lower than the
generation number of a commit we are about to use.
The walks are as follows:
1. EXPLORE: using the explore_queue priority queue (ordered by
maximizing the generation number), parse each reachable
commit until all commits in the queue have generation
number strictly lower than needed. During this walk, update
the UNINTERESTING flags as necessary.
2. INDEGREE: using the indegree_queue priority queue (ordered
by maximizing the generation number), add one to the in-
degree of each parent for each commit that is walked. Since
we walk in order of decreasing generation number, we know
that discovering an in-degree value of 0 means the value for
that commit was not initialized, so should be initialized to
two. (Recall that in-degree value "1" is what we use to say a
commit is ready for output.) As we iterate the parents of a
commit during this walk, ensure the EXPLORE walk has walked
beyond their generation numbers.
3. TOPO: using the topo_queue priority queue (ordered based on
the sort_order given, which could be commit-date, author-
date, or typical topo-order which treats the queue as a LIFO
stack), remove a commit from the queue and decrement the
in-degree of each parent. If a parent has an in-degree of
one, then we add it to the topo_queue. Before we decrement
the in-degree, however, ensure the INDEGREE walk has walked
beyond that generation number.
The implementations of these walks are in the following methods:
* explore_walk_step and explore_to_depth
* indegree_walk_step and compute_indegrees_to_depth
* next_topo_commit and expand_topo_walk
These methods have some patterns that may seem strange at first,
but they are probably carry-overs from their equivalents in
limit_list and sort_in_topological_order.
One thing that is missing from this implementation is a proper
way to stop walking when the entire queue is UNINTERESTING, so
this implementation is not enabled by comparisions, such as in
'git rev-list --topo-order A..B'. This can be updated in the
future.
In my local testing, I used the following Git commands on the
Linux repository in three modes: HEAD~1 with no commit-graph,
HEAD~1 with a commit-graph, and HEAD with a commit-graph. This
allows comparing the benefits we get from parsing commits from
the commit-graph and then again the benefits we get by
restricting the set of commits we walk.
Test: git rev-list --topo-order -100 HEAD
HEAD~1, no commit-graph: 6.80 s
HEAD~1, w/ commit-graph: 0.77 s
HEAD, w/ commit-graph: 0.02 s
Test: git rev-list --topo-order -100 HEAD -- tools
HEAD~1, no commit-graph: 9.63 s
HEAD~1, w/ commit-graph: 6.06 s
HEAD, w/ commit-graph: 0.06 s
This speedup is due to a few things. First, the new generation-
number-enabled algorithm walks commits on order of the number of
results output (subject to some branching structure expectations).
Since we limit to 100 results, we are running a query similar to
filling a single page of results. Second, when specifying a path,
we must parse the root tree object for each commit we walk. The
previous benefits from the commit-graph are entirely from reading
the commit-graph instead of parsing commits. Since we need to
parse trees for the same number of commits as before, we slow
down significantly from the non-path-based query.
For the test above, I specifically selected a path that is changed
frequently, including by merge commits. A less-frequently-changed
path (such as 'README') has similar end-to-end time since we need
to walk the same number of commits (before determining we do not
have 100 hits). However, get the benefit that the output is
presented to the user as it is discovered, much the same as a
normal 'git log' command (no '--topo-order'). This is an improved
user experience, even if the command has the same runtime.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few things that need to move around a little before
making a big refactoring in the topo-order logic:
1. We need access to record_author_date() and
compare_commits_by_author_date() in revision.c. These are used
currently by sort_in_topological_order() in commit.c.
2. Moving these methods to commit.h requires adding an author_date_slab
declaration to commit.h. Consumers will need their own implementation.
3. The add_parents_to_list() method in revision.c performs logic
around the UNINTERESTING flag and other special cases depending
on the struct rev_info. Allow this method to ignore a NULL 'list'
parameter, as we will not be populating the list for our walk.
Also rename the method to the slightly more generic name
process_parents() to make clear that this method does more than
add to a list (and no list is required anymore).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git rev-list --topo-order' and its kin, the topo_order
setting in struct rev_info implies the limited setting. This means
that the following things happen during prepare_revision_walk():
* revs->limited implies we run limit_list() to walk the entire
reachable set. There are some short-cuts here, such as if we
perform a range query like 'git rev-list COMPARE..HEAD' and we
can stop limit_list() when all queued commits are uninteresting.
* revs->topo_order implies we run sort_in_topological_order(). See
the implementation of that method in commit.c. It implies that
the full set of commits to order is in the given commit_list.
These two methods imply that a 'git rev-list --topo-order HEAD'
command must walk the entire reachable set of commits _twice_ before
returning a single result.
If we have a commit-graph file with generation numbers computed, then
there is a better way. This patch introduces some necessary logic
redirection when we are in this situation.
In v2.18.0, the commit-graph file contains zero-valued bytes in the
positions where the generation number is stored in v2.19.0 and later.
Thus, we use generation_numbers_enabled() to check if the commit-graph
is available and has non-zero generation numbers.
When setting revs->limited only because revs->topo_order is true,
only do so if generation numbers are not available. There is no
reason to use the new logic as it will behave similarly when all
generation numbers are INFINITY or ZERO.
In prepare_revision_walk(), if we have revs->topo_order but not
revs->limited, then we trigger the new logic. It breaks the logic
into three pieces, to fit with the existing framework:
1. init_topo_walk() fills a new struct topo_walk_info in the rev_info
struct. We use the presence of this struct as a signal to use the
new methods during our walk. In this patch, this method simply
calls limit_list() and sort_in_topological_order(). In the future,
this method will set up a new data structure to perform that logic
in-line.
2. next_topo_commit() provides get_revision_1() with the next topo-
ordered commit in the list. Currently, this simply pops the commit
from revs->commits.
3. expand_topo_walk() provides get_revision_1() with a way to signal
walking beyond the latest commit. Currently, this calls
add_parents_to_list() exactly like the old logic.
While this commit presents method redirection for performing the
exact same logic as before, it allows the next commit to focus only
on the new logic.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "rev-list --filter" feature learned to exclude all trees via
"tree:0" filter.
* md/filter-trees:
list-objects: support for skipping tree traversal
filter-trees: code clean-up of tests
list-objects-filter: implement filter tree:0
list-objects-filter-options: do not over-strbuf_init
list-objects-filter: use BUG rather than die
revision: mark non-user-given objects instead
rev-list: handle missing tree objects properly
list-objects: always parse trees gently
list-objects: refactor to process_tree_contents
list-objects: store common func args in struct
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the new ref aliases to pass refs from another worktree
around and access them from the current ref store instead. This does
not change any functionality, but when a problem arises, we would like
the reported messages to mention full ref aliases, like this:
fatal: bad object worktrees/ztemp/HEAD
warning: reflog of 'main-worktree/HEAD' references pruned commits
instead of
fatal: bad object HEAD
warning: reflog of 'HEAD' references pruned commits
which does not really tell where the refs are from.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is a callback of for_each_reflog() which will pass a ref
name as the first argument, not a path (to a reflog file).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Currently, list-objects.c incorrectly treats all root trees of commits
as USER_GIVEN. Also, it would be easier to mark objects that are
non-user-given instead of user-given, since the places in the code
where we access an object through a reference are more obvious than
the places where we access an object that was given by the user.
Resolve these two problems by introducing a flag NOT_USER_GIVEN that
marks blobs and trees that are non-user-given, replacing USER_GIVEN.
(Only blobs and trees are marked because this mark is only used when
filtering objects, and filtering of other types of objects is not
supported yet.)
This fixes a bug in that git rev-list behaved differently from git
pack-objects. pack-objects would *not* filter objects given explicitly
on the command line and rev-list would filter. This was because the two
commands used a different function to add objects to the rev_info
struct. This seems to have been an oversight, and pack-objects has the
correct behavior, so I added a test to make sure that rev-list now
behaves properly.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new variant repo_diff_setup() is added that takes 'struct repository *'
and diff_setup() becomes a thin macro around it that is protected by
NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_....
The plan is these macros will always be defined for all library files
and the macros are only accessible in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
"git rev-list --stdin </dev/null" used to be an error; it now shows
no output without an error. "git rev-list --stdin --default HEAD"
still falls back to the given default when nothing is given on the
standard input.
* jk/rev-list-stdin-noop-is-ok:
rev-list: make empty --stdin not an error
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we originally did the series that contains 7ba826290a
(revision: add rev_input_given flag, 2017-08-02) the intent
was that "git rev-list --stdin </dev/null" would similarly
become a successful noop. However, an attempt at the time to
do that did not work[1]. The problem is that rev_input_given
serves two roles:
- it tells rev-list.c that it should not error out
- it tells revision.c that it should not have the "default"
ref kick (e.g., "HEAD" in "git log")
We want to trigger the former, but not the latter. This is
technically possible with a single flag, if we set the flag
only after revision.c's revs->def check. But this introduces
a rather subtle ordering dependency.
Instead, let's keep two flags: one to denote when we got
actual input (which triggers both roles) and one for when we
read stdin (which triggers only the first).
This does mean a caller interested in the first role has to
check both flags, but there's only one such caller. And any
future callers might want to make the distinction anyway
(e.g., if they care less about erroring out, and more about
whether revision.c soaked up our stdin).
In fact, we already keep such a flag internally in
revision.c for this purpose, so this is really just exposing
that to the caller (and the old function-local flag can go
away in favor of our new one).
[1] https://public-inbox.org/git/20170802223416.gwiezhbuxbdmbjzx@sigill.intra.peff.net/
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy clone support had a few places where missing but promised
objects were not correctly tolerated, which have been fixed.
* jt/tags-to-promised-blobs-fix:
tag: don't warn if target is missing but promised
revision: tolerate promised targets of tags
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
In handle_commit(), it is fatal for an annotated tag to point to a
non-existent object. --exclude-promisor-objects should relax this rule
and allow non-existent objects that are promisor objects, but this is
not the case. Update handle_commit() to tolerate this situation.
This was observed when cloning from a repository with an annotated tag
pointing to a blob. The test included in this patch demonstrates this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A filter line in a request to upload-pack filters out objects regardless
of whether they are directly referenced by a "want" line or not. This
means that cloning with "--filter=blob:none" (or another filter that
excludes blobs) from a repository with at least one ref pointing to a
blob (for example, the Git repository itself) results in output like the
following:
error: missing object referenced by 'refs/tags/junio-gpg-pub'
and if that particular blob is not referenced by a fetched tree, the
resulting clone fails fsck because there is no object from the remote to
vouch that the missing object is a promisor object.
Update both the protocol and the upload-pack implementation to include
all explicitly specified "want" objects in the packfile regardless of
the filter specification.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
Code clean-up to turn history traversal more robust in a
semi-corrupt repository.
* jk/unavailable-can-be-missing:
mark_parents_uninteresting(): avoid most allocation
mark_parents_uninteresting(): replace list with stack
mark_parents_uninteresting(): drop missing object check
mark_tree_contents_uninteresting(): drop missing object check
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
Instead of relying on commit->util to store the source string, let the
user provide a commit-slab to store the source strings in.
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 941ba8db57 (Eliminate recursion in setting/clearing
marks in commit list, 2012-01-14) used a clever double-loop
to avoid allocations for single-parent chains of history.
However, it did so only when following parents of parents
(which was an uncommon case), and _always_ incurred at least
one allocation to populate the list of pending parents in
the first place.
We can turn this into zero-allocation in the common case by
iterating directly over the initial parent list, and then
following up on any pending items we might have discovered.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mark_parents_uninteresting() function uses two loops:
an outer one to process our queue of pending parents, and an
inner one to process first-parent chains. This is a clever
optimization from 941ba8db57 (Eliminate recursion in
setting/clearing marks in commit list, 2012-01-14) to limit
the number of linked-list allocations when following
single-parent chains.
Unfortunately, this makes the result a little hard to read.
Let's replace the list with a stack. Then we don't have to
worry about doing this double-loop optimization, as we'll
just reuse the top element of the stack as we pop/push.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow UNINTERESTING objects in a traversal to be
unavailable. As part of this, mark_parents_uninteresting()
checks whether we have a particular uninteresting parent; if
not, we will mark it as "parsed" so that later code skips
it.
This code is redundant and even a little bit harmful, so
let's drop it.
It's redundant because when our parse_object() call in
add_parents_to_list() fails, we already quietly skip
UNINTERESTING parents. This redundancy is a historical
artifact. The mark_parents_uninteresting() protection is
from 454fbbcde3 (git-rev-list: allow missing objects when
the parent is marked UNINTERESTING, 2005-07-10). Much later,
aeeae1b771 (revision traversal: allow UNINTERESTING objects
to be missing, 2009-01-27) covered more cases by making the
actual parse more gentle.
As an aside, even if this weren't redundant, it would be
insufficient. The gentle parsing handles both missing and
corrupted objects, whereas the has_object_file() check
we're getting rid of covers only missing ones.
And the code we're dropping is harmful for two reasons:
1. We spend extra time on the object lookup, even though
we don't actually need the information at this point
(and will just repeat that lookup later when we parse
for the common case that we _do_ have the object).
2. It "lies" about the commit by setting the parsed flag,
even though we didn't load any useful data into the
struct. This shouldn't matter for the UNINTERESTING
case, but we may later clear our flags and do another
traversal in the same process. While pretty unlikely,
it's possible that we could then look at the same
commit without the UNINTERESTING flag, in which case
we'd produce the wrong result (we'd think it's a commit
with no parents, when in fact we should probably die
due to the missing object).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's generally acceptable for UNINTERESTING objects in a
traversal to be unavailable (e.g., see aeeae1b771). When
marking trees UNINTERESTING, we access the object database
twice: once to check if the object is missing (and return
quietly if it is), and then again to actually parse it.
We can instead just try to parse; if that fails, we can then
return quietly. That halves the effort we spend on locating
the object.
Note that this isn't _exactly_ the same as the original
behavior, as the parse failure could be due to other
problems than a missing object: it could be corrupted, in
which case the original code would have died. But the new
behavior is arguably better, as it covers the object being
unavailable for any reason. We'll also still issue a warning
to stderr in such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace two uses of the hard-coded constant 40 with references to
the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this function to take a pointer to struct object_id and rename
it has_object_pack for consistency with has_object_file.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the get_main_ref_store caller
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In mark_parents_uninteresting(), we check for the existence of an
object file to see if we should treat a commit as parsed. The result
is to set the "parsed" bit on the commit.
Modify the condition to only check has_object_file() if the result
would change the parsed bit.
When a local branch is different from its upstream ref, "git status"
will compute ahead/behind counts. This uses paint_down_to_common()
and hits mark_parents_uninteresting(). On a copy of the Linux repo
with a local instance of "master" behind the remote branch
"origin/master" by ~60,000 commits, we find the performance of
"git status" went from 1.42 seconds to 1.32 seconds, for a relative
difference of -7.0%.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an undocumented debugging aid that does not seem to
have come in handy in the past decade, judging from its lack
of mentions on the mailing list.
Let's drop it in the name of simplicity. This is morally a
revert of 3131b71301 (Add "--show-all" revision walker flag
for debugging, 2008-02-09), but note that I did leave in the
mapping of UNINTERESTING to "^" in get_revision_mark(). I
don't think this would be possible to trigger with the
current code, but it's the only sensible marker.
We'll skip the usual deprecation period because this was
explicitly a debugging aid that was never documented.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
The split-index mode had a few corner case bugs fixed.
* tg/split-index-fixes:
travis: run tests with GIT_TEST_SPLIT_INDEX
split-index: don't write cache tree with null oid entries
read-cache: fix reading the shared index for other repos
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
read_index_from() takes a path argument for the location of the index
file. For reading the shared index in split index mode however it just
ignores that path argument, and reads it from the gitdir of the current
repository.
This works as long as an index in the_repository is read. Once that
changes, such as when we read the index of a submodule, or of a
different working tree than the current one, the gitdir of
the_repository will no longer contain the appropriate shared index,
and git will fail to read it.
For example t3007-ls-files-recurse-submodules.sh was broken with
GIT_TEST_SPLIT_INDEX set in 188dce131f ("ls-files: use repository
object", 2017-06-22), and t7814-grep-recurse-submodules.sh was also
broken in a similar manner, probably by introducing struct repository
there, although I didn't track down the exact commit for that.
be489d02d2 ("revision.c: --indexed-objects add objects from all
worktrees", 2017-08-23) breaks with split index mode in a similar
manner, not erroring out when it can't read the index, but instead
carrying on with pruning, without taking the index of the worktree into
account.
Fix this by passing an additional gitdir parameter to read_index_from,
to indicate where it should look for and read the shared index from.
read_cache_from() defaults to using the gitdir of the_repository. As it
is mostly a convenience macro, having to pass get_git_dir() for every
call seems overkill, and if necessary users can have more control by
using read_index_from().
Helped-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
One might be tempted to extend git-describe to also work with blobs,
such that `git describe <blob-id>` gives a description as
'<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer
number of responses (>110), it turns out this is tricky to get right.
The hard part to get right is picking the correct 'commit-ish' as that
could be the commit that (re-)introduced the blob or the blob that
removed the blob; the blob could exist in different branches.
Junio hinted at a different approach of solving this problem, which this
patch implements. Teach the diff machinery another flag for restricting
the information to what is shown. For example:
$ ./git log --oneline --find-object=v2.0.0:Makefile
b2feb64309 Revert the whole "ask curl-config" topic for now
47fbfded53 i18n: only extract comments marked with "TRANSLATORS:"
we observe that the Makefile as shipped with 2.0 was appeared in
v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The
reason why these commits both occur prior to v2.0.0 are evil
merges that are not found using this new mechanism.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
[2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the check whether to perform pickaxing is done via checking
`diffopt->pickaxe`, which contains the command line argument that we
want to pickaxe for. Soon we'll introduce a new type of pickaxing, that
will not store anything in the `.pickaxe` field, so let's migrate the
check to be dependent on pickaxe_opts.
It is not enough to just replace the check for pickaxe by pickaxe_opts,
because flags might be set, but pickaxing was not requested ('-i').
To cope with that, introduce a mask to check only for the bits indicating
the modes of operation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently flags for pickaxing are found in different places. Unify the
flags into the `pickaxe_opts` field, which will contain any pickaxe related
flags.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
Teach rev-list to support termination of an object traversal at any
object from a promisor remote (whether one that the local repo also has,
or one that the local repo knows about because it has another promisor
object that references it).
This will be used subsequently in gc and in the connectivity check used
by fetch.
For efficiency, if an object is referenced by a promisor object, and is
in the local repo only as a non-promisor object, object traversal will
not stop there. This is to avoid building the list of promisor object
references.
(In list-objects.c, the case where obj is NULL in process_blob() and
process_tree() do not need to be changed because those happen only when
there is a conflict between the expected type and the existing object.
If the object doesn't exist, an object will be synthesized, which is
fine.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality to list tree objects in the order they were seen
while traversing the commits will be used in one of the next commits,
where we teach `git describe` to describe not only commits, but blobs, too.
The change in list-objects.c is rather minimal as we'll be re-using
the infrastructure put in place of the revision walking machinery. For
example one could expect that add_pending_tree is not called, but rather
commit->tree is directly passed to the tree traversal function. This
however requires a lot more code than just emptying the queue containing
trees after each commit.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
Pathspec-limited revision traversal was taught not to keep finding
unneeded differences once it knows two trees are different inside
given pathspec.
* jk/revision-pruning-optim:
revision: quit pruning diff more quickly when possible
Remove the `DIFF_OPT_CLR` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_CLR(&E, fld)
+ E.flags.fld = 0
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_CLR(ptr, fld)
+ ptr->flags.fld = 0
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the revision traversal machinery is given a pathspec,
we must compute the parent-diff for each commit to determine
which ones are TREESAME. We set the QUICK diff flag to avoid
looking at more entries than we need; we really just care
whether there are any changes at all.
But there is one case where we want to know a bit more: if
--remove-empty is set, we care about finding cases where the
change consists only of added entries (in which case we may
prune the parent in try_to_simplify_commit()). To cover that
case, our file_add_remove() callback does not quit the diff
upon seeing an added entry; it keeps looking for other types
of entries.
But this means when --remove-empty is not set (and it is not
by default), we compute more of the diff than is necessary.
You can see this in a pathological case where a commit adds
a very large number of entries, and we limit based on a
broad pathspec. E.g.:
perl -e '
chomp(my $blob = `git hash-object -w --stdin </dev/null`);
for my $a (1..1000) {
for my $b (1..1000) {
print "100644 $blob\t$a/$b\n";
}
}
' | git update-index --index-info
git commit -qm add
git rev-list HEAD -- .
This case takes about 100ms now, but after this patch only
needs 6ms. That's not a huge improvement, but it's easy to
get and it protects us against even more pathological cases
(e.g., going from 1 million to 10 million files would take
ten times as long with the current code, but not increase at
all after this patch).
This is reported to minorly speed-up pathspec limiting in
real world repositories (like the 100-million-file Windows
repository), but probably won't make a noticeable difference
outside of pathological setups.
This patch actually covers the case without --remove-empty,
and the case where we see only deletions. See the in-code
comment for details.
Note that we have to add a new member to the diff_options
struct so that our callback can see the value of
revs->remove_empty_trees. This callback parameter could be
passed to the "add_remove" and "change" callbacks, but
there's not much point. They already receive the
diff_options struct, and doing it this way avoids having to
update the function signature of the other callbacks
(arguably the format_callback and output_prefix functions
could benefit from the same simplification).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_ref_unsafe() if hash is not needed
refs: pass NULL to refs_resolve_ref_unsafe() if hash is not needed
refs: make sha1 output parameter of refs_resolve_ref_unsafe() optional
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We assemble an array of strings in a custom struct,
NULL-terminate the result, and then pass it to
parse_pathspec().
But then we never free the array or the individual strings
(nor can we do the latter, as they are heap-allocated when
they come from stdin but not when they come from the
passed-in argv).
Let's swap this out for an argv_array. It does the same
thing with fewer lines of code, and it's safe to call
argv_array_clear() at the end to avoid a memory leak.
Reported-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and friends when multiple worktrees are used off of a
single repository did not consider the index and per-worktree refs
of other worktrees as the root for reachability traversal, making
objects that are in use only in other worktrees to be subject to
garbage collection.
* nd/prune-in-worktree:
refs.c: reindent get_submodule_ref_store()
refs.c: remove fallback-to-main-store code get_submodule_ref_store()
rev-list: expose and document --single-worktree
revision.c: --reflog add HEAD reflog from all worktrees
files-backend: make reflog iterator go through per-worktree reflog
revision.c: --all adds HEAD from all worktrees
refs: remove dead for_each_*_submodule()
refs.c: move for_each_remote_ref_submodule() to submodule.c
revision.c: use refs_for_each*() instead of for_each_*_submodule()
refs: add refs_head_ref()
refs: move submodule slash stripping code to get_submodule_ref_store
refs.c: refactor get_submodule_ref_store(), share common free block
revision.c: --indexed-objects add objects from all worktrees
revision.c: refactor add_index_objects_to_pending()
refs.c: use is_dir_sep() in resolve_gitlink_ref()
revision.h: new flag in struct rev_info wrt. worktree-related refs
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Note that add_other_reflogs_to_pending() is a bit inefficient, since
it scans reflog for all refs of each worktree, including shared refs,
so the shared ref's reflog is scanned over and over again.
We could update refs API to pass "per-worktree only" flag to avoid
that. But long term we should be able to obtain a "per-worktree only"
ref store and would need to revert the changes in reflog iteration
API. So let's just wait until then.
add_reflogs_to_pending() is called by reachable.c so by default "git
prune" will examine reflog from all worktrees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless single_worktree is set, --all now adds HEAD from all worktrees.
Since reachable.c code does not use setup_revisions(), we need to call
other_head_refs_submodule() explicitly there to have the same effect on
"git prune", so that we won't accidentally delete objects needed by some
other HEADs.
A new FIXME is added because we would need something like
int refs_other_head_refs(struct ref_store *, each_ref_fn, cb_data);
in addition to other_head_refs() to handle it, which might require
int get_submodule_worktrees(const char *submodule, int flags);
It could be a separate topic to reduce the scope of this one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the result of single_worktree flag never being set (no way to up
until now). To get objects from current index only, set single_worktree.
The other add_index_objects_to_pending's caller is mark_reachable_objects()
(e.g. "git prune") which also mark objects from all indexes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core code is factored out and take 'struct index_state *' instead so
that we can reuse it to add objects from index files other than .git/index
in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
Conversion from uchar[20] to struct object_id continues.
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
If revs->def is set (as it is in "git log") and there are no
pending objects after parsing the user's input, then we show
whatever is in "def". But if the user _did_ ask for some
input that just happened to be empty (e.g., "--glob" that
does not match anything), showing the default revision is
confusing. We should just show nothing, as that is what the
user's request yielded.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally a caller that invokes setup_revisions() has to
check rev.pending to see if anything was actually queued for
the traversal. But they can't tell the difference between
two cases:
1. The user gave us no tip from which to start a
traversal.
2. The user tried to give us tips via --glob, --all, etc,
but their patterns ended up being empty.
Let's set a flag in the rev_info struct that callers can use
to tell the difference. We can set this from the
init_all_refs_cb() function. That's a little funny because
it's not exactly about initializing the "cb" struct itself.
But that function is the common setup place for doing
pattern traversals that is used by --glob, --all, etc.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the flags for get_oid_with_context and friends to use "OID"
instead of "SHA1" in their names.
This transform was made by running the following one-liner on the
affected files:
perl -pi -e 's/GET_SHA1/GET_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* ab/grep-lose-opt-regflags:
grep: remove redundant REG_NEWLINE when compiling fixed regex
grep: remove regflags from the public grep_opt API
grep: remove redundant and verbose re-assignments to 0
grep: remove redundant "fixed" field re-assignment to 0
grep: adjust a redundant grep pattern type assignment
grep: remove redundant double assignment to 0
When doing a reflog walk, we use the commit's date to
do any date limiting. In earlier versions of Git, this could
lead to nonsense results, since a skipped commit would
truncate the traversal. So a sequence like:
git commit ...
git checkout week-old-branch
git checkout -
git log -g --since=1.day.ago
would stop at the week-old-branch, even though the "git
commit" entry further back is still interesting.
As of the prior commit, which uses a parent-less traversal
of the reflog, you get the whole reflog minus any commits
whose dates do not match the specified options. This is
arguably useful, as you could scan the reflogs for commits
that originated in a certain range.
But more likely a user doing a reflog walk wants to limit
based on the reflog entries themselves. You can simulate
--until with:
git log -g @{1.day.ago}
but there's no way to ask Git to traverse only back to a
certain date. E.g.:
# show me reflog entries from the past day
git log -g --since=1.day.ago
This patch teaches the revision machinery to prefer the
reflog entry dates to the commit dates when doing a reflog
walk. Technically this is a change in behavior that affects
plumbing, but the previous behavior was so buggy that it's
unlikely anyone was relying on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog-walk system works by putting a ref's tip into the
pending queue, and then "traversing" the reflog by
pretending that the parent of each commit is the previous
reflog entry.
This causes a number of user-visible oddities, as documented
in t1414 (and the commit message which introduced it). We
can fix all of them in one go by replacing the fake-reflog
system with a much simpler one: just keeping a list of
reflogs to show, and walking through them entry by entry.
The implementation is fairly straight-forward, but there are
a few items to note:
1. We obviously must skip calling add_parents_to_list()
when we are traversing reflogs, since we do not want to
walk the original parents at all. As a result, we must call
try_to_simplify_commit() ourselves.
There are other parts of add_parents_to_list() we skip,
as well, but none of them should matter for a reflog
traversal:
- We do not allow UNINTERESTING commits, nor
symmetric ranges (and we bail when these are used
with "-g").
- Using --source makes no sense, since we aren't
traversing. The reflog selector shows the same
information with more detail.
- Using --first-parent is still sensible, since you
may want to see the first-parent diff for each
entry. But since we're not traversing, we don't
need to cull the parent list here.
2. Since we now just walk the reflog entries themselves,
rather than starting with the ref tip, we now look at
the "new" field of each entry rather than the "old"
(i.e., we are showing entries, not faking parents).
This removes all of the tricky logic around skipping
past root commits.
But note that we have no way to show an entry with the
null sha1 in its "new" field (because such a commit
obviously does not exist). Normally this would not
happen, since we delete reflogs along with refs, but
there is one special case. When we rename the currently
checked out branch, we write two reflog entries into
the HEAD log: one where the commit goes away, and
another where it comes back.
Prior to this commit, we show both entries with
identical reflog messages. After this commit, we show
only the "comes back" entry. See the update in t3200
which demonstrates this.
Arguably either is fine, as the whole double-entry
thing is a bit hacky in the first place. And until a
recent fix, we truncated the traversal in such a case
anyway, which was _definitely_ wrong.
3. We show individual reflogs in order, but choose which
reflog to show at each stage based on which has the
most recent timestamp. This interleaves the output
from multiple reflogs based on date order, which is
probably what you'd want with limiting like "-n 30".
Note that the implementation aims for simplicity. It
does a linear walk over the reflog queue for each
commit it pulls, which may perform badly if you
interleave an enormous number of reflogs. That seems
like an unlikely use case; if we did want to handle it,
we could probably keep a priority queue of reflogs,
ordered by the timestamp of their current tip entry.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_revision_1() function tries to avoid entering its
main loop at all when there are no commits to look at. But
it's perfectly safe to call pop_commit() on an empty list
(in which case it will return NULL). Switching to an early
return from the loop lets us skip repeating the loop
condition before we enter the do-while. That will get more
important when we start pulling reflog-walk commits from a
source besides the revs->commits queue, as that condition
will get much more complicated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog-walk code doesn't work with limit_list(). That
function traverses down the real history graph, not the fake
reflog history that get_revision() returns. So it's not
going to actually examine all of the commits we're going to
show, because we'd add them to the pending list only during
the actual traversal.
In practice this limitation doesn't really matter, because
the options that require list-limiting generally need
UNINTERESTING endpoints or symmetric ranges, which already
are forbidden for reflog walks. Still, there are likely some
corner cases that would behave oddly. We're better off to
warn the user that we can't fulfill their request than to
generate potentially wrong output.
This will also make it easier to refactor the reflog-walking
code, because it eliminates a whole area of corner cases
we'd have to consider (that already don't work anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor calls to the grep machinery to always pass opt.ignore_case &
opt.extended_regexp_option instead of setting the equivalent regflags
bits.
The bug fixed when making -i work with -P in commit 9e3cbc59d5 ("log:
make --regexp-ignore-case work with --perl-regexp", 2017-05-20) was
really just plastering over the code smell which this change fixes.
The reason for adding the extensive commentary here is that I
discovered some subtle complexity in implementing this that really
should be called out explicitly to future readers.
Before this change we'd rely on the difference between
`extended_regexp_option` and `regflags` to serve as a membrane between
our preliminary parsing of grep.extendedRegexp and grep.patternType,
and what we decided to do internally.
Now that those two are the same thing, it's necessary to unset
`extended_regexp_option` just before we commit in cases where both of
those config variables are set. See 84befcd0a4 ("grep: add a
grep.patternType configuration setting", 2012-08-03) for the code and
documentation related to that.
The explanation of why the if/else branches in
grep_commit_pattern_type() are ordered the way they are exists in that
commit message, but I think it's worth calling this subtlety out
explicitly with a comment for future readers.
Even though grep_commit_pattern_type() is the only caller of
grep_set_pattern_type_option() it's simpler to reset the
extended_regexp_option flag in the latter, since 2/3 branches in the
former would otherwise need to reset it, this way we can do it in one
place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bugfix for a topic that is (only) in 'master'.
* mh/packed-ref-store-prep:
for_each_bisect_ref(): don't trim refnames
lock_packed_refs(): fix cache validity check
Remove the unused wildopts placeholder struct from being passed to all
wildmatch() invocations, or rather remove all the boilerplate NULL
parameters.
This parameter was added back in commit 9b3497cab9 ("wildmatch: rename
constants and update prototype", 2013-01-01) as a placeholder for
future use. Over 4 years later nothing has made use of it, let's just
remove it. It can be added in the future if we find some reason to
start using such a parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* sg/revision-parser-skip-prefix:
revision.c: use skip_prefix() in handle_revision_pseudo_opt()
revision.c: use skip_prefix() in handle_revision_opt()
revision.c: stricter parsing of '--early-output'
revision.c: stricter parsing of '--no-{min,max}-parents'
revision.h: turn rev_info.early_output back into an unsigned int
Update "perl-compatible regular expression" support to enable JIT
and also allow linking with the newer PCRE v2 library.
* ab/pcre-v2:
grep: add support for PCRE v2
grep: un-break building with PCRE >= 8.32 without --enable-jit
grep: un-break building with PCRE < 8.20
grep: un-break building with PCRE < 8.32
grep: add support for the PCRE v1 JIT API
log: add -P as a synonym for --perl-regexp
grep: skip pthreads overhead when using one thread
grep: don't redundantly compile throwaway patterns under threading
`for_each_bisect_ref()` is called by `for_each_bad_bisect_ref()` with
a term "bad". This used to make it call `for_each_ref_in_submodule()`
with a prefix "refs/bisect/bad". But the latter is the name of the
reference that is being sought, so the empty string was being passed
to the callback as the trimmed refname. Moreover, this questionable
practice was turned into an error by
b9c8e7f2fb prefix_ref_iterator: don't trim too much, 2017-05-22
It makes more sense (and agrees better with the documentation of
`--bisect`) for the callers to receive the full reference names. So
* Add a new function, `for_each_fullref_in_submodule()`, to the refs
API. This plugs a gap in the existing functionality, analogous to
`for_each_fullref_in()` but accepting a `submodule` argument.
* Change `for_each_bad_bisect_ref()` to call the new function rather
than `for_each_ref_in_submodule()`.
* Add a test.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of starts_with() and a bunch of magic numbers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of starts_with() and a bunch of magic numbers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parsing of '--early-output' with or without its optional integer
argument allowed bogus options like '--early-output-foobarbaz' to slip
through and be ignored.
Fix it by parsing '--early-output' in the same way as other options
with an optional argument are parsed. Furthermore, use strtoul_ui()
to parse the optional integer argument and to refuse negative numbers.
While at it, use skip_prefix() instead of starts_with() and magic
numbers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two options are parsed using starts_with(), allowing things like
'git log --no-min-parents-foobarbaz' to succeed.
Use strcmp() instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal implementation of "git grep" has seen some clean-up.
* ab/grep-preparatory-cleanup: (31 commits)
grep: assert that threading is enabled when calling grep_{lock,unlock}
grep: given --threads with NO_PTHREADS=YesPlease, warn
pack-objects: fix buggy warning about threads
pack-objects & index-pack: add test for --threads warning
test-lib: add a PTHREADS prerequisite
grep: move is_fixed() earlier to avoid forward declaration
grep: change internal *pcre* variable & function names to be *pcre1*
grep: change the internal PCRE macro names to be PCRE1
grep: factor test for \0 in grep patterns into a function
grep: remove redundant regflags assignments
grep: catch a missing enum in switch statement
perf: add a comparison test of log --grep regex engines with -F
perf: add a comparison test of log --grep regex engines
perf: add a comparison test of grep regex engines with -F
perf: add a comparison test of grep regex engines
perf: emit progress output when unpacking & building
perf: add a GIT_PERF_MAKE_COMMAND for when *_MAKE_OPTS won't do
grep: add tests to fix blind spots with \0 patterns
grep: prepare for testing binary regexes containing rx metacharacters
grep: add a test helper function for less verbose -f \0 tests
...
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
Convert diff_change to take a struct object_id. In addition convert the
function pointer type 'change_fn_t' to also take a struct object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert diff_addremove to take a struct object_id. In addtion convert
the function pointer type 'add_remove_fn_t' to also take a struct
object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tag objects, which are not reachable from any ref, that point at
missing objects were mishandled by "git gc" and friends (they
should silently be ignored instead)
* jk/ignore-broken-tags-when-ignoring-missing-links:
revision.c: ignore broken tags with ignore_missing_links
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Add a short -P option as a synonym for the longer --perl-regexp, for
consistency with the options the corresponding grep invocations
accept.
This was intentionally omitted in commit 727b6fc3ed ("log --grep:
accept --basic-regexp and --perl-regexp", 2012-10-03) for unspecified
future use.
Make it consistent with "grep" rather than to keep it open for future
use, and to avoid the confusion of -P meaning different things for
grep & log, as is the case with the -G option.
As noted in the aforementioned commit the --basic-regexp option can't
have a corresponding -G argument, as the log command already uses that
for -G<regex>.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the revision parser sees an argument like tree:path, we
parse it down to the correct blob (or tree), but throw away
the "path" portion. Let's ask get_sha1_with_context() to
record it, and pass it along in the pending array.
This will let programs like git-diff which rely on the
revision-parser show more accurate paths.
Note that the implementation is a little tricky; we have to
make sure we free oc.path in all code paths. For handle_dotdot(),
we can piggy-back on the existing cleanup-wrapper pattern.
The real work happens in handle_dotdot_1(), but the
handle_dotdot() wrapper makes sure that the path is freed no
matter how we exit the function (and for that reason we make
sure that the object_context struct is zero'd, so if we fail
to even get to the get_sha1_with_context() call, we just end
up calling free(NULL)).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "a..b" revision syntax was designed to handle commits,
so it doesn't bother to record any mode we find while
traversing a "tree:path" endpoint. These days "git diff" can
diff blobs using either "a:path..b:path" (with dots) or
"a:path b:path" (without), but the two behave
inconsistently, as the with-dots version fails to notice the
mode.
Let's teach the dot-dot range parser to record modes; it
doesn't cost us anything, and it makes this case work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handle_revision_arg function is rather long, and a big
chunk of it is handling the range operators. Let's pull that
out to a separate helper. While we're doing so, we can clean
up a few of the rough edges that made the flow hard to
follow:
- instead of manually restoring *dotdot (that we overwrote
with a NUL), do the real work in a sub-helper, which
makes it clear that the munge/restore lines are a
matched pair
- eliminate a goto which wasn't actually used for control
flow, but only to avoid duplicating a few lines
(instead, those lines are pushed into another helper
function)
- use early returns instead of deep nesting
- consistently name all variables for the left-hand side
of the range as "a" (rather than "this" or "from") and
the right-hand side as "b" (rather than "next", or using
the unadorned "sha1" or "flags" from the main function).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 003c84f6d (specifying ranges: we did not mean to make
".." an empty set, 2011-05-02), we treat the argument ".."
specially. We detect it by noticing that both sides of the
range are empty, and that this is a non-symmetric two-dot
range.
While correct, this makes the code overly complicated. We
can just detect ".." up front before we try to do further
parsing. This avoids having to de-munge the NUL from dotdot,
and lets us eliminate an extra const array (which we needed
only to do direct pointer comparisons).
It also removes the one code path from the range-parsing
conditional that requires us to return -1. That will make it
simpler to pull the dotdot parsing out into its own
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handle_revision_arg() function has a "dotdot" variable
that it uses to find a ".." or "..." in the argument. If we
don't find one, we look for other marks, like "^!". But we
just keep re-using the "dotdot" variable, which is
confusing.
Let's introduce a separate "mark" variable that can be used
for these other marks. They still reuse the same variable,
but at least the name is no longer actively misleading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "dotdot" range parser avoids calling
lookup_commit_reference() if we are directly fed two
commits. But its casts are unnecessarily complex; that
function will just return a commit we pass into it.
Just calling the function all the time is much simpler, and
doesn't do any significant extra work (the object is already
parsed, and deref_tag() on a non-tag is a noop; we do incur
one extra lookup_object() call, but that's fairly trivial).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a range like "a..b", we write a
temporary NUL over the first ".", so that we can access the
names "a" and "b" as C strings. But our restoration of the
original "." is done at inconsistent times, which can lead
to confusing results.
For most calls, we restore the "." after we resolve the
names, but before we call verify_non_filename(). This means
that when we later call add_pending_object(), the name for
the left-hand "a" has been re-expanded to "a..b". You can
see this with:
git log --source a...b
where "b" will be correctly marked with "b", but "a" will be
marked with "a...b". Likewise with "a..b" (though you need
to use --boundary to even see "a" at all in that case).
To top off the confusion, when the REVARG_CANNOT_BE_FILENAME
flag is set, we skip the non-filename check, and leave the
NUL in place.
That means we do report the correct name for "a" in the
pending array. But some code paths try to show the whole
"a...b" name in error messages, and these erroneously show
only "a" instead of "a...b". E.g.:
$ git cherry-pick HEAD:foo...HEAD:foo
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
fatal: Invalid symmetric difference expression HEAD:foo
(That last message should be "HEAD:foo...HEAD:foo"; I used
cherry-pick because it passes the CANNOT_BE_FILENAME flag).
As an interesting side note, cherry-pick actually looks at
and re-resolves the arguments from the pending->name fields.
So it would have been visibly broken by the first bug, but
the effect was canceled out by the second one.
This patch makes the whole function consistent by re-writing
the NUL immediately after calling verify_non_filename(), and
then restoring the "." as appropriate in some error-printing
and early-return code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Make the --regexp-ignore-case option work with --perl-regexp. This
never worked, and there was no test for this. Fix the bug and add a
test.
When PCRE support was added in commit 63e7e9d8b6 ("git-grep: Learn
PCRE", 2011-05-09) compile_pcre_regexp() would only check
opt->ignore_case, but when the --perl-regexp option was added in
commit 727b6fc3ed ("log --grep: accept --basic-regexp and
--perl-regexp", 2012-10-03) the code didn't set the opt->ignore_case.
Change the test suite to test for -i and --invert-regexp with
basic/extended/perl patterns in addition to fixed, which was the only
patternType that was tested for before in combination with those
options.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When peeling a tag for prepare_revision_walk(), we do not
respect the ignore_missing_links flag. This can lead to a
bogus error when pack-objects walks the possibly-broken
unreachable-but-recent part of the object graph.
The other link-following all happens via traverse_commit_list(),
which explains why this case was missed. And our tests
covered only broken links from commits. Let's be more
comprehensive and cover broken tree entries (which do work)
and tags (which shows off this bug).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename this function and convert it to take a pointer to struct
object_id.
This is a prerequisite for converting get_reference, which is needed to
convert parse_object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the lookup_tree function to take a pointer to struct object_id.
The commit was created with manual changes to tree.c, tree.h, and
object.c, plus the following semantic patch:
@@
@@
- lookup_tree(EMPTY_TREE_SHA1_BIN)
+ lookup_tree(&empty_tree_oid)
@@
expression E1;
@@
- lookup_tree(E1.hash)
+ lookup_tree(&E1)
@@
expression E1;
@@
- lookup_tree(E1->hash)
+ lookup_tree(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_blob to take a pointer to struct object_id.
The commit was created with manual changes to blob.c and blob.h, plus
the following semantic patch:
@@
expression E1;
@@
- lookup_blob(E1.hash)
+ lookup_blob(&E1)
@@
expression E1;
@@
- lookup_blob(E1->hash)
+ lookup_blob(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a caller of lookup_commit_or_die, which we will convert later
on.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the sha1 member of struct cache_tree to struct object_id by
changing the definition and applying the following semantic patch, plus
the standard object_id transforms:
@@
struct cache_tree E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_tree *E1;
@@
- E1->sha1
+ E1->oid.hash
Fix up one reference to active_cache_tree which was not automatically
caught by Coccinelle. These changes are prerequisites for converting
parse_object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log rev^..rev" is an often-used revision range specification
to show what was done on a side branch merged at rev. This has
gained a short-hand "rev^-1". In general "rev^-$n" is the same as
"^rev^$n rev", i.e. what has happened on other branches while the
history leading to nth parent was looking the other way.
* vn/revision-shorthand-for-side-branch-log:
revision: new rev^-n shorthand for rev^n..rev
"git log rev^..rev" is commonly used to show all work done on and merged
from a side branch. This patch introduces a shorthand "rev^-" for this
and additionally allows "rev^-$n" to mean "reachable from rev, excluding
what is reachable from the nth parent of rev". For example, for a
two-parent merge, you can use rev^-2 to get the set of commits which were
made to the main branch while the topic branch was prepared.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" tries to compare set of changes on the updated
upstream and our own branch, it computes patch-id for all of these
changes and attempts to find matches. This has been optimized by
lazily computing the full patch-id (which is expensive) to be
compared only for changes that touch the same set of paths.
* kw/patch-ids-optim:
rebase: avoid computing unnecessary patch IDs
patch-ids: add flag to create the diff patch id using header only data
patch-ids: replace the seen indicator with a commit pointer
patch-ids: stop using a hand-rolled hashmap implementation
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
The cherry_pick_list was looping through the original side checking the
seen indicator and setting the cherry_flag on the commit. If we save
off the commit in the patch_id we can set the cherry_flag on the correct
commit when running through the other side when a patch_id match is found.
Signed-off-by: Kevin Willford <kcwillford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When c5c31d33 (grep: move pattern-type bits support to top-level
grep.[ch], 2012-10-03) introduced grep_commit_pattern_type() helper
function, the intention was to allow the users of grep API to having
to fiddle only with .pattern_type_option (which can be set to "fixed",
"basic", "extended", and "pcre"), and then immediately before compiling
the pattern strings for use, call grep_commit_pattern_type() to have
it prepare various bits in the grep_opt structure (like .fixed,
.regflags, etc.).
However, grep_set_pattern_type_option() helper function the grep API
internally uses were left as an external function by mistake. This
function shouldn't have been made callable by the users of the API.
Later when the grep API was used in revision traversal machinery,
the caller then mistakenly started calling the function around
34a4ae55 (log --grep: use the same helper to set -E/-F options as
"git grep", 2012-10-03), instead of setting the .pattern_type_option
field and letting the grep_commit_pattern_type() to take care of the
details.
This caused an unnecessary bug that made a configured
grep.patternType take precedence over the command line options
(e.g. --basic-regexp, --fixed-strings) in "git log" family of
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learns log.showSignature configuration variable, and a
command line option "--no-show-signature" to countermand it.
* mj/log-show-signature-conf:
log: add log.showSignature configuration variable
log: add "--no-show-signature" command line option
t4202: refactor test
If an user creates an alias with "--show-signature" early in command
line, e.g.
[alias] logss = log --show-signature
then there is no way to countermand it through command line.
Teach git-log and related commands about "--no-show-signature" command
line option. This will make "git logss --no-show-signature" run
without showing GPG signature.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
When "git log" shows the log message indented by 4-spaces, the
remainder of a line after a HT does not align in the way the author
originally intended. The command now expands tabs by default in
such a case, and allows the users to override it with a new option,
'--no-expand-tabs'.
* lt/pretty-expand-tabs:
pretty: test --expand-tabs
pretty: allow tweaking tabwidth in --expand-tabs
pretty: enable --expand-tabs by default for selected pretty formats
pretty: expand tabs in indented logs to make things line up properly
When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we left name_path as a thin wrapper
around a strbuf. This patch drops it entirely. As a result,
every show_object_fn callback needs to be adjusted. However,
none of their code needs to be changed at all, because the
only use was to pass it to path_name(), which now handles
the bare strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct name_path" data is examined in only two places:
we generate it in process_tree(), and we convert it to a
single string in path_name(). Everyone else just passes it
through to those functions.
We can further note that process_tree() already keeps a
single strbuf with the leading tree path, for use with
tree_entry_interesting().
Instead of building a separate name_path linked list, let's
just use the one we already build in "base". This reduces
the amount of code (especially tricky code in path_name()
which did not check for integer overflows caused by deep
or large pathnames).
It is also more efficient in some instances. Any time we
were using tree_entry_interesting, we were building up the
strbuf anyway, so this is an immediate and obvious win
there. In cases where we were not, we trade off storing
"pathname/" in a strbuf on the heap for each level of the
path, instead of two pointers and an int on the stack (with
one pointer into the tree object). On a 64-bit system, the
latter is 20 bytes; so if path components are less than that
on average, this has lower peak memory usage. In practice
it probably doesn't matter either way; we are already
holding in memory all of the tree objects leading up to each
pathname, and for normal-depth pathnames, we are only
talking about hundreds of bytes.
This patch leaves "struct name_path" as a thin wrapper
around the strbuf, to avoid disrupting callbacks. We should
fix them, but leaving it out makes this diff easier to view.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rev-list" shows an object with its associated path
name, it does so by walking the name_path linked list and
printing each component (stopping at any embedded NULs or
newlines).
We'd like to eventually get rid of name_path entirely in
favor of a single buffer, and dropping this custom printing
code is part of that. As a first step, let's use path_name()
to format the list into a single buffer, and print that.
This is strictly less efficient than the original, but it's
a temporary step in the refactoring; our end game will be to
get the fully formatted name in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we left name_path as a thin wrapper
around a strbuf. This patch drops it entirely. As a result,
every show_object_fn callback needs to be adjusted. However,
none of their code needs to be changed at all, because the
only use was to pass it to path_name(), which now handles
the bare strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct name_path" data is examined in only two places:
we generate it in process_tree(), and we convert it to a
single string in path_name(). Everyone else just passes it
through to those functions.
We can further note that process_tree() already keeps a
single strbuf with the leading tree path, for use with
tree_entry_interesting().
Instead of building a separate name_path linked list, let's
just use the one we already build in "base". This reduces
the amount of code (especially tricky code in path_name()
which did not check for integer overflows caused by deep
or large pathnames).
It is also more efficient in some instances. Any time we
were using tree_entry_interesting, we were building up the
strbuf anyway, so this is an immediate and obvious win
there. In cases where we were not, we trade off storing
"pathname/" in a strbuf on the heap for each level of the
path, instead of two pointers and an int on the stack (with
one pointer into the tree object). On a 64-bit system, the
latter is 20 bytes; so if path components are less than that
on average, this has lower peak memory usage. In practice
it probably doesn't matter either way; we are already
holding in memory all of the tree objects leading up to each
pathname, and for normal-depth pathnames, we are only
talking about hundreds of bytes.
This patch leaves "struct name_path" as a thin wrapper
around the strbuf, to avoid disrupting callbacks. We should
fix them, but leaving it out makes this diff easier to view.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rev-list" shows an object with its associated path
name, it does so by walking the name_path linked list and
printing each component (stopping at any embedded NULs or
newlines).
We'd like to eventually get rid of name_path entirely in
favor of a single buffer, and dropping this custom printing
code is part of that. As a first step, let's use path_name()
to format the list into a single buffer, and print that.
This is strictly less efficient than the original, but it's
a temporary step in the refactoring; our end game will be to
get the fully formatted name in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few options of "git diff" did not work well when the command was
run from a subdirectory.
* nd/diff-with-path-params:
diff: make -O and --output work in subdirectory
diff-no-index: do not take a redundant prefix argument
A few options of "git diff" did not work well when the command was
run from a subdirectory.
* nd/diff-with-path-params:
diff: make -O and --output work in subdirectory
diff-no-index: do not take a redundant prefix argument
Reading with getwholeline() and manually stripping the terminating
'\n' would leave CR at the end of the line if the input comes from
a DOS editor.
Constrasting this with the other changes around "--stdin" in this
series, one may realize that the way "log" family of commands read
the paths with "--stdin" looks inconsistent and sloppy. It does not
allow us to C-quote a textual input, neither does it accept records
that are NUL-terminated. These are unfortunately way too late to
fix X-<.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
When we unwrap a tag to find its commit for a traversal, we
do not propagate the "name" field of the tag in the pending
array (i.e., the ref name the user gave us in the first
place) to the commit (instead, we use an empty string). This
means that "git log --source" will never show the tag-name
for commits we reach through it.
This was broken in 2073949 (traverse_commit_list: support
pending blobs/trees with paths, 2014-10-15). That commit
tried to be careful and avoid propagating the path
information for a tag (which would be nonsensical) to trees
and blobs. But it should not have cut off the "name" field,
which should carry forward to children.
Note that this does mean that the "name" field will carry
forward to blobs and trees, too. Whereas prior to 2073949,
we always gave them an empty string. This is the right thing
to do, but in practice no callers probably use it (since now
we have an explicit separate "path" field, which was the
point of 2073949).
We add tests here not only for the broken case, but also a
basic sanity test of "log --source" in general, which did
not have any coverage in the test suite.
Reported-by: Raymundo <gypark@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mark_tree_uninteresting() has code to handle the case where it gets
passed a NULL pointer in its 'tree' parameter, but the function had
'object = &tree->object' assignment before checking if tree is
NULL. This gives a compiler an excuse to declare that tree will
never be NULL and apply a wrong optimization. Avoid it.
* sn/null-pointer-arith-in-mark-tree-uninteresting:
revision.c: fix possible null pointer arithmetic
mark_tree_uninteresting() has code to handle the case where it gets
passed a NULL pointer in its 'tree' parameter, but the function had
'object = &tree->object' assignment before checking if tree is
NULL. This gives a compiler an excuse to declare that tree will
never be NULL and apply a wrong optimization. Avoid it.
* sn/null-pointer-arith-in-mark-tree-uninteresting:
revision.c: fix possible null pointer arithmetic
mark_tree_uninteresting() dereferences a tree pointer before
checking if the pointer is valid. Fix that by doing the check first.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Instead of open-coding the function pop_commit() just call it. This
makes the intent clearer and reduces code size.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we already know the length of a string (e.g., because
we just malloc'd to fit it), it's nicer to use memcpy than
strcpy, as it makes it more obvious that we are not going to
overflow the buffer (because the size we pass matches the
size in the allocation).
This also eliminates calls to strcpy, which make auditing
the code base harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
If you init or clone an empty repository, the initial
message from running "git log" is not very friendly:
$ git init
Initialized empty Git repository in /home/peff/foo/.git/
$ git log
fatal: bad default revision 'HEAD'
Let's detect this situation and write a more friendly
message:
$ git log
fatal: your current branch 'master' does not have any commits yet
We also detect the case that 'HEAD' points to a broken ref;
this should be even less common, but is easy to see. Note
that we do not diagnose all possible cases. We rely on
resolve_ref, which means we do not get information about
complex cases. E.g., "--default master" would use dwim_ref
to find "refs/heads/master", but we notice only that
"master" does not exist. Similarly, a complex sha1
expression like "--default HEAD^2" will not resolve as a
ref.
But that's OK. We fall back to a generic error message in
those cases, and they are unlikely to be used anyway.
Catching an empty or broken "HEAD" improves the common case,
and the other cases are not regressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code and documentation clean-up to "git bisect".
* ad/bisect-cleanup:
bisect: don't mix option parsing and non-trivial code
bisect: simplify the addition of new bisect terms
bisect: replace hardcoded "bad|good" by variables
Documentation/bisect: revise overall content
Documentation/bisect: move getting help section to the end
bisect: correction of typo
We create a file BISECT_TERMS in the repository .git to be read during a
bisection. There's no user-interface yet, but "git bisect" works if terms
other than old/new or bad/good are set in .git/BISECT_TERMS. The
fonctions to be changed if we add new terms are quite few.
In git-bisect.sh:
check_and_set_terms
bisect_voc
Co-authored-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Tweaked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is called only from one place, which makes sure to have
`interesting_cache` not NULL. Additionally the variable is a
dereferenced a few lines before unconditionally, which would have
resulted in a segmentation fault before hitting this check.
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
When we are traversing commit parents along the
UNINTERESTING side of a revision walk, we do not care if
the parent turns out to be missing. That lets us limit
traversals using unreachable and possibly incomplete
sections of history. However, we do still print error
messages about the missing commits; this patch suppresses
the error, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set revs->ignore_missing_links to instruct the
revision-walking machinery that we know the history graph
may be incomplete. For example, we use it when walking
unreachable but recent objects; we want to add what we can,
but it's OK if the history is incomplete.
However, we still print error messages for the missing
objects, which can be confusing. This is not an error, but
just a normal situation when transitioning from a repository
last pruned by an older git (which can leave broken segments
of history) to a more recent one (where we try to preserve
whole reachable segments).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects $old --not --all" to see if everything that
is reachable from $old is already connected to the existing refs
was very inefficient.
* jk/still-interesting:
limit_list: avoid quadratic behavior from still_interesting
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects $old --not --all" to see if everything that
is reachable from $old is already connected to the existing refs
was very inefficient.
* jk/still-interesting:
limit_list: avoid quadratic behavior from still_interesting
When we are limiting a rev-list traversal due to
UNINTERESTING refs, we have to walk down the tips (both
interesting and uninteresting) to find where they intersect.
We keep a queue of commits to examine, pop commits off
the queue one by one, and potentially add their parents. The
size of the queue will naturally fluctuate based on the
"width" of the history graph; i.e., the number of
simultaneous lines of development. But for the most part it
will stay in the same ballpark as the initial number of tips
we fed, shrinking over time (as we hit common ancestors of
the tips). So roughly speaking, if we start with `N` tips,
we'll spend much of the time with a queue around `N` items.
For each UNINTERESTING commit we pop, we call
still_interesting to check whether marking its parents as
UNINTERESTING has made the whole queue uninteresting (in
which case we can quit early). Because the queue is stored
as a linked list, this is `O(N)`, where `N` is the number of
items in the queue. So processing a queue with `N` commits
marked UNINTERESTING (and one or more interesting commits)
will take `O(N^2)`.
If you feed a lot of positive tips, this isn't a problem.
They aren't UNINTERESTING, so they don't incur the
still_interesting check. It also isn't a problem if you
traverse from an interesting tip to some UNINTERESTING
bases. We order the queue by recency, so the interesting
commits stay at the front of the queue as we walk down them.
The linear check can exit early as soon as it sees one
interesting commit left in the queue.
But if you want to know whether an older commit is reachable
from a set of newer tips, we end up processing in the
opposite direction: from the UNINTERESTING ones down to the
interesting one. This may happen when we call:
git rev-list $commits --not --all
in check_everything_connected after a fetch. If we fetched
something much older than most of our refs, and if we have a
large number of refs, the traversal cost is dominated by the
quadratic behavior.
These commands simulate the connectivity check of such a
fetch, when you have `$n` distinct refs in the receiver:
# positive ref is 100,000 commits deep
git rev-list --all | head -100000 | tail -1 >input
# huge number of more recent negative refs
git rev-list --all | head -$n | sed s/^/^/ >>input
time git rev-list --stdin <input
Here are timings for various `n` on the linux.git
repository. The `n=1` case provides a baseline for just
walking the commits, which lets us see the still_interesting
overhead. The times marked with `+` subtract that baseline
to show just the extra time growth due to the large number
of refs. The `x` numbers show the slowdown of the adjusted
time versus the prior trial.
n | before | after
--------------------------------------------------------
1 | 0.991s | 0.848s
10000 | 1.120s (+0.129s) | 0.885s (+0.037s)
20000 | 1.451s (+0.460s, 3.5x) | 0.923s (+0.075s, 2.0x)
40000 | 2.731s (+1.740s, 3.8x) | 0.994s (+0.146s, 1.9x)
80000 | 8.235s (+7.244s, 4.2x) | 1.123s (+0.275s, 1.9x)
Each trial doubles `n`, so you can see the quadratic (`4x`)
behavior before this patch. Afterwards, we have a roughly
linear relationship.
The implementation is fairly straightforward. Whenever we do
the linear search, we cache the interesting commit we find,
and next time check it before doing another linear search.
If that commit is removed from the list or becomes
UNINTERESTING itself, then we fall back to the linear
search. This is very similar to the trick used by fce87ae
(Fix quadratic performance in rewrite_one., 2008-07-12).
I considered and rejected several possible alternatives:
1. Keep a count of UNINTERESTING commits in the queue.
This requires managing the count not only when removing
an item from the queue, but also when marking an item
as UNINTERESTING. That requires touching the other
functions which mark commits, and would require knowing
quickly which commits are in the queue (lookup in the
queue is linear, so we would need an auxiliary
structure or to also maintain an IN_QUEUE flag in each
commit object).
2. Keep a separate list of interesting commits. Drop items
from it when they are dropped from the queue, or if
they become UNINTERESTING. This again suffers from
extra complexity to maintain the list, not to mention
CPU and memory.
3. Use a better data structure for the queue. This is
something that could help the fix in fce87ae, because
we order the queue by recency, and it is about
inserting quickly in recency order. So a normal
priority queue would help there. But here, we cannot
disturb the order of the queue, which makes things
harder. We really do need an auxiliary index to track
the flag we care about, which is basically option (2)
above.
The "cache" trick is simple, and the numbers above show that
it works well in practice. This is because the length of
time it takes to find an interesting commit is proportional
to the length of time it will remain cached (i.e., if we
have to walk a long way to find it, it also means we have to
pop a lot of elements in the queue until we get rid of it
and have to find another interesting commit).
The worst case is still quadratic, though. We could have `N`
uninteresting commits at the front of the queue, followed by
`N` interesting commits, where commit `i` has parent `i+N`.
When we pop commit `i`, we will notice that the parent of
the next commit, `i+1+N` is still interesting and cache it.
But then handling commit `i+1`, we will mark its parent
`i+1+N` uninteresting, and immediately invalidate our cache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
"git rev-list --bisect --first-parent" does not work (yet) and can
even cause SEGV; forbid it. "git log --bisect --first-parent"
would not be useful until "git bisect --first-parent" materializes,
so it is also forbidden for now.
* kd/rev-list-bisect-first-parent:
rev-list: refuse --first-parent combined with --bisect
rev-list --bisect is used by git bisect, but never together with
--first-parent. Because rev-list --bisect together with --first-parent
is not handled currently, and even leads to segfaults, refuse to use
both options together.
Because this is not supported, it makes little sense to use git log
--bisect --first parent either, because refs/heads/bad is not limited to
the first parent chain.
Helped-by: Junio C. Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "--graph" is about connected history while --no-walk is
about discrete points, it does not make sense to allow these two
options at the same time. [1]
This change makes a few calls to "show --graph" fail in t4052, but
asking to show one commit with graph is a nonsensical thing to do.
Thus, tests on "show --graph" in t4052 have been removed [2,3].
Same tests on "show" without --graph option have already been tested
in 4052.
3 testcases have been added to test this patch.
[1]: http://article.gmane.org/gmane.comp.version-control.git/216083
[2]: http://article.gmane.org/gmane.comp.version-control.git/264950
[3]: http://article.gmane.org/gmane.comp.version-control.git/265107
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Helped-By: René Scharfe <l.s.r@web.de>
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark file-local symbols as "static", and drop functions that nobody
uses.
* jc/unused-symbols:
shallow.c: make check_shallow_file_for_update() static
remote.c: make clear_cas_option() static
urlmatch.c: make match_urls() static
revision.c: make save_parents() and free_saved_parents() static
line-log.c: make line_log_data_init() static
pack-bitmap.c: make pack_bitmap_filename() static
prompt.c: remove git_getpass() nobody uses
http.c: make finish_active_slot() and handle_curl_result() static
"git log --invert-grep --grep=WIP" will show only commits that do
not have the string "WIP" in their messages.
* cj/log-invert-grep:
log: teach --invert-grep option
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we made "rev-list --object-edge" more aggressively list the
objects at the edge commits, in order to reduce number of objects
fetched into a shallow repository, but the change affected cases
other than "fetching into a shallow repository" and made it
unusably slow (e.g. fetching into a normal repository should not
have to suffer the overhead from extra processing). Limit it to a
more specific case by introducing --objects-edge-aggressive, a new
option to rev-list.
* bc/fetch-thin-less-aggressive-in-normal-repository:
pack-objects: use --objects-edge-aggressive for shallow repos
rev-list: add an option to mark fewer edges as uninteresting
Documentation: add missing article in rev-list-options.txt
The get_merge_bases*() API was easy to misuse by careless
copy&paste coders, leaving object flags tainted in the commits that
needed to be traversed.
* jc/merge-bases:
get_merge_bases(): always clean-up object flags
bisect: clean flags after checking merge bases
In commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting - 2013-08-16), we marked an increasing number
of edges uninteresting. This change, and the subsequent change to make
this conditional on --objects-edge, are used by --thin to make much
smaller packs for shallow clones.
Unfortunately, they cause a significant performance regression when
pushing non-shallow clones with lots of refs (23.322 seconds vs.
4.785 seconds with 22400 refs). Add an option to git rev-list,
--objects-edge-aggressive, that preserves this more aggressive behavior,
while leaving --objects-edge to provide more performant behavior.
Preserve the current behavior for the moment by using the aggressive
option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers of get_merge_bases() can choose to leave object flags
used during the merge-base traversal by passing cleanup=0 as a
parameter, but in practice a very few callers can afford to do so
(namely, "git merge-base"), as they need to compute merge base in
preparation for other processing of their own and they need to see
the object without contaminate flags.
Change the function signature of get_merge_bases_many() and
get_merge_bases() to drop the cleanup parameter, so that the
majority of the callers do not have to say ", 1" at the end.
Give a new get_merge_bases_many_dirty() API to support only a few
callers that know they do not need to spend cycles cleaning up the
object flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no easy way to ask the revision traversal
machinery to include objects reachable from the index (e.g.,
blobs and trees that have not yet been committed). This
patch adds an option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call traverse_commit_list, we may have trees and
blobs in the pending array. As we process these, we pass the
"name" field from the pending entry as the path of the
object within the tree (which then becomes the root path if
we recurse into subtrees).
When we set up the traversal in prepare_revision_walk,
though, the "name" field of any pending trees and blobs is
likely to be the ref at which we found the object. We would
not want to make this part of the path (e.g., doing so would
make "git rev-list --objects v2.6.11-tree" in linux.git show
paths like "v2.6.11-tree/Makefile", which is nonsensical).
Therefore prepare_revision_walk sets the name field of each
pending tree and blobs to the empty string.
However, this leaves no room for a caller who does know the
correct path of a pending object to propagate that
information to the revision walker. We can fix this by
making two related changes:
1. Use the "path" field as the path instead of the "name"
field in traverse_commit_list. If the path is not set,
default to "" (which is what we always ended up with in
the current code, because of prepare_revision_walk).
2. In prepare_revision_walk, make a complete copy of the
entry. This makes the path field available to the
walker (if there is one), solving our problem.
Leaving the name field intact is now OK, as we do not
use it as a path due to point (1) above (and we can use
it to make more meaningful error messages if we want).
We also make the original "mode" field available to the
walker, though it does not actually use it.
Note that we still re-add the pending objects and free the
old ones (so we may strdup the path and name only to free
the old ones). This could be made more efficient by simply
copying the object_array entries that we are keeping.
However, that would require more restructuring of the code,
and is not done here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to add all reflog entries as tips for finding
reachable objects. The revision machinery can already do
this (to support "rev-list --reflog"); we can reuse that
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we enter prepare_revision_walk, we have zero or more
entries in our "pending" array. We disconnect that array
from the rev_info, and then process each entry:
1. If the entry is a commit and the --source option is in
effect, we keep a pointer to the object name.
2. Otherwise, we re-add the item to the pending list with
a blank name.
We then throw away the old array by freeing the array
itself, but do not touch the "name" field of each entry. For
any items of type (2), we leak the memory associated with
the name. This commit fixes that by calling object_array_clear,
which handles the cleanup for us.
That breaks (1), though, because it depends on the memory
pointed to by the name to last forever. We can solve that by
making a copy of the name. This is slightly less efficient,
but it shouldn't matter in practice, as we do it only for
the tip commits of the traversal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to allocate the structure to keep track of commit
decoration was cumbersome to use, inviting lazy code to
overallocate memory.
* jk/name-decoration-alloc:
log-tree: use FLEX_ARRAY in name_decoration
log-tree: make name_decoration hash static
log-tree: make add_name_decoration a public function
In the previous commit, we made add_name_decoration global
so that adders would not have to access the hash directly.
We now make the hash itself static so that callers _have_ to
add through our function, making sure that all additions go
through a single point. To do this, we have to add one more
accessor function: a way to lookup entries in the hash.
Since the only caller doesn't actually look at the returned
value, but rather only asks whether there is a decoration or
not, we could provide only a boolean "has_name_decoration".
That would allow us to make "struct name_decoration" local
to log-tree, as well.
However, it's unlikely to cause any maintainability harm
making the actual data public, and this interface is more
flexible if we need to look at decorations from other parts
of the code in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, we parsed pretty options by looking for
"--pretty" at the start of the string, and then feeding the
rest (including an "=") to get_commit_format. Later, commit
48ded91 (log --pretty: do not accept bogus "--prettyshort",
2008-05-25) split this into a separate check for "--pretty"
versus "--pretty=".
However, when parsing "--pretty", we still passed "arg+8" to
get_commit_format. This is useless, since it will always
point to the NUL terminator at the end of the string. We can
simply pass NULL instead; both parameters are treated the
same by get_commit_format.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of code paths had to read the commit object more than
once when showing header fields that are usually not parsed. The
internal data structure to keep track of the contents of the commit
object has been updated to reduce the need for this double-reading,
and to allow the caller find the length of the object.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
"git log --exclude=<glob> --all | git shortlog" worked as expected,
but "git shortlog --exclude=<glob> --all", which is supposed to be
identical to the above pipeline, was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mistyped command line simply ignores "master" and ends up
showing two commits from the current HEAD:
$ git log -2master
because we feed "2master" to atoi() without making sure that the
whole string is parsed as an integer.
Use the strtol_i() helper function instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --exclude=<glob> --all | shortlog" worked as expected, but
"shortlog --exclude=<glob> --all" was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
These two commands are supposed to be equivalent:
$ git log --exclude=refs/notes/\* --all --no-merges --since=2.days |
git shortlog
$ git shortlog --exclude=refs/notes/\* --all --no-merges --since=2.days
However, the latter does not understand the ref-exclusion command
line option, even though other options understood by "log", such as
"--all" and "--no-merges", are understood.
This was because e7b432c5 (revision: introduce --exclude=<glob> to
tame wildcards, 2013-08-30) did not wire the new option fully to the
machinery. A new option understood by handle_revision_pseudo_opt()
must be told to handle_revision_opt() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects is computing the reachability bitmap to
serve a fetch request, it can erroneously die() if some of
the UNINTERESTING objects are not present. Upload-pack
throws away HAVE lines from the client for objects we do not
have, but we may have a tip object without all of its
ancestors (e.g., if the tip is no longer reachable and was
new enough to survive a `git prune`, but some of its
reachable objects did get pruned).
In the non-bitmap case, we do a revision walk with the HAVE
objects marked as UNINTERESTING. The revision walker
explicitly ignores errors in accessing UNINTERESTING commits
to handle this case (and we do not bother looking at
UNINTERESTING trees or blobs at all).
When we have bitmaps, however, the process is quite
different. The bitmap index for a pack-objects run is
calculated in two separate steps:
First, we perform an extensive walk from all the HAVEs to
find the full set of objects reachable from them. This walk
is usually optimized away because we are expected to hit an
object with a bitmap during the traversal, which allows us
to terminate early.
Secondly, we perform an extensive walk from all the WANTs,
which usually also terminates early because we hit a commit
with an existing bitmap.
Once we have the resulting bitmaps from the two walks, we
AND-NOT them together to obtain the resulting set of objects
we need to pack.
When we are walking the HAVE objects, the revision walker
does not know that we are walking it only to mark the
results as uninteresting. We strip out the UNINTERESTING flag,
because those objects _are_ interesting to us during the
first walk. We want to keep going to get a complete set of
reachable objects if we can.
We need some way to tell the revision walker that it's OK to
silently truncate the HAVE walk, just like it does for the
UNINTERESTING case. This patch introduces a new
`ignore_missing_links` flag to the `rev_info` struct, which
we set only for the HAVE walk.
It also adds tests to cover UNINTERESTING objects missing
from several positions: a missing blob, a missing tree, and
a missing parent commit. The missing blob already worked (as
we do not care about its contents at all), but the other two
cases caused us to die().
Note that there are a few cases we do not need to test:
1. We do not need to test a missing tree, with the blob
still present. Without the tree that refers to it, we
would not know that the blob is relevant to our walk.
2. We do not need to test a tip commit that is missing.
Upload-pack omits these for us (and in fact, we
complain even in the non-bitmap case if it fails to do
so).
Reported-by: Siddharth Agarwal <sid0@fb.com>
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempts to show where a single-strand-of-pearls break in "git log"
output.
* nd/log-show-linear-break:
log: add --show-linear-break to help see non-linear history
object.h: centralize object flag allocation
Option explanation is in rev-list-options.txt. The interaction with -z
is left undecided.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/warn-on-object-refname-ambiguity:
rev-list: disable object/refname ambiguity check with --stdin
cat-file: restore warn_on_object_refname_ambiguity flag
cat-file: fix a minor memory leak in batch_objects
cat-file: refactor error handling of batch_objects
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
This is the "rev-list" analogue to 25fba78 (cat-file:
disable object/refname ambiguity check for batch mode,
2013-07-12). Like cat-file, "rev-list --stdin" may read a
large number of sha1 object names, and the warning check
introduces a significant slow-down.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
* ks/tree-diff-walk:
tree-walk: finally switch over tree descriptors to contain a pre-parsed entry
revision: convert to using diff_tree_sha1()
line-log: convert to using diff_tree_sha1()
tree-diff: convert diff_root_tree_sha1() to just call diff_tree_sha1 with old=NULL
tree-diff: allow diff_tree_sha1 to accept NULL sha1
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
