When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even after working with this code for years, I still see this constant
name as "ref node ref". Rename it to make it's meaning clearer.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The constants used for `ref_update::flags` were rather disorganized:
* The definitions in `refs.h` were not close to the functions that
used them.
* Maybe constants were defined in `refs-internal.h`, making them
visible to the whole refs module, when in fact they only made sense
for the files backend.
* Their documentation wasn't very consistent and partly still referred
to sha1s rather than oids.
* The numerical values followed no rational scheme
Fix all of these problems. The main functional improvement is that
some constants' visibility is now limited to `files-backend.c`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`prune_ref()` needs to use the `REF_ISPRUNING` flag, but we want to
make that flag private to the files backend. So instead of calling
`ref_transaction_delete()`, which is a public function and therefore
shouldn't allow the `REF_ISPRUNING` flag, change `prune_ref()` to call
`ref_transaction_add_update()`, which is private to the refs
module. (Note that we don't need any of the other services provided by
`ref_transaction_delete()`.)
This allows us to change `ref_transaction_update()` to reject the
`REF_ISPRUNING` flag. Do so by adjusting
`REF_TRANSACTION_UPDATE_ALLOWED_FLAGS`. Also add parentheses to its
definition to avoid potential future mishaps.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert resolve_ref_unsafe to take a pointer to struct object_id by
converting one remaining caller to use struct object_id, removing the
temporary NULL pointer check in expand_ref, converting the declaration
and definition, and applying the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3.hash, E4)
+ resolve_ref_unsafe(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3->hash, E4)
+ resolve_ref_unsafe(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of resolve_gitlink_ref to use
struct object_id and apply the following semantic patch:
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3.hash)
+ resolve_gitlink_ref(E1, E2, &E3)
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3->hash)
+ resolve_gitlink_ref(E1, E2, E3)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog_expire already used struct object_id internally, but it did not
take it as a parameter. Adjust the parameter (and the callers) to pass
a pointer to struct object_id instead of a pointer to unsigned char.
Remove the temporary inserted earlier as it is no longer required.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers and internals, including struct read_ref_at_cb, of
read_ref_at to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert peel_ref (and its corresponding backend) to struct object_id.
This transformation was done with an update to the declaration,
definition, comments, and test helper and the following semantic patch:
@@
expression E1, E2;
@@
- peel_ref(E1, E2.hash)
+ peel_ref(E1, &E2)
@@
expression E1, E2;
@@
- peel_ref(E1, E2->hash)
+ peel_ref(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly. Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the ref transaction code to use struct object_id. Remove one
NULL pointer check which was previously inserted around a dereference;
since we now pass a pointer to struct object_id directly through, the
code we're calling handles this for us.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert delete_ref and refs_delete_ref to take a pointer to struct
object_id. Update the documentation accordingly, including referring to
null_oid in lowercase, as it is not a #define constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" learned "-c/-C" to create a new branch by copying an
existing one.
* sd/branch-copy:
branch: fix "copy" to never touch HEAD
branch: add a --copy (-c) option to go with --move (-m)
branch: add test for -m renaming multiple config sections
config: create a function to format section headers
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_ref_unsafe() if hash is not needed
refs: pass NULL to refs_resolve_ref_unsafe() if hash is not needed
refs: make sha1 output parameter of refs_resolve_ref_unsafe() optional
API error-proofing which happens to also squelch warnings from GCC.
* tg/refs-allowed-flags:
refs: strip out not allowed flags from ref_transaction_update
Allow callers of refs_resolve_ref_unsafe() to pass NULL if they don't
need the resolved hash value. We already allow the same for the flags
parameter. This new leniency is inherited by the various wrappers like
resolve_ref_unsafe().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers are only allowed to pass certain flags into
ref_transaction_update, other flags are internal to it. To prevent
mistakes from the callers, strip the internal only flags out before
continuing.
This was noticed because of a compiler warning gcc 7.1.1 issued about
passing a NULL parameter as second parameter to memcpy (through
hashcpy):
In file included from refs.c:5:0:
refs.c: In function ‘ref_transaction_verify’:
cache.h:948:2: error: argument 2 null where non-null expected [-Werror=nonnull]
memcpy(sha_dst, sha_src, GIT_SHA1_RAWSZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from git-compat-util.h:165:0,
from cache.h:4,
from refs.c:5:
/usr/include/string.h:43:14: note: in a call to function ‘memcpy’ declared here
extern void *memcpy (void *__restrict __dest, const void *__restrict __src,
^~~~~~
The call to hascpy in ref_transaction_add_update is protected by the
passed in flags, but as we only add flags there, gcc notices
REF_HAVE_NEW or REF_HAVE_OLD flags could be passed in from the outside,
which would potentially result in passing in NULL as second parameter to
memcpy.
Fix both the compiler warning, and make the interface safer for its
users by stripping the internal flags out.
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are used in revision.c. After the last patch they are replaced
with the refs_ version. Delete them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`for_each_bisect_ref()` is called by `for_each_bad_bisect_ref()` with
a term "bad". This used to make it call `for_each_ref_in_submodule()`
with a prefix "refs/bisect/bad". But the latter is the name of the
reference that is being sought, so the empty string was being passed
to the callback as the trimmed refname. Moreover, this questionable
practice was turned into an error by
b9c8e7f2fb prefix_ref_iterator: don't trim too much, 2017-05-22
It makes more sense (and agrees better with the documentation of
`--bisect`) for the callers to receive the full reference names. So
* Add a new function, `for_each_fullref_in_submodule()`, to the refs
API. This plugs a gap in the existing functionality, analogous to
`for_each_fullref_in()` but accepting a `submodule` argument.
* Change `for_each_bad_bisect_ref()` to call the new function rather
than `for_each_ref_in_submodule()`.
* Add a test.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to --copy a branch and its reflog and configuration,
this uses the same underlying machinery as the --move (-m) option
except the reflog and configuration is copied instead of being moved.
This is useful for e.g. copying a topic branch to a new version,
e.g. work to work-2 after submitting the work topic to the list, while
preserving all the tracking info and other configuration that goes
with the branch, and unlike --move keeping the other already-submitted
branch around for reference.
Like --move, when the source branch is the currently checked out
branch the HEAD is moved to the destination branch. In the case of
--move we don't really have a choice (other than remaining on a
detached HEAD) and in order to keep the functionality consistent, we
are doing it in similar way for --copy too.
The most common usage of this feature is expected to be moving to a
new topic branch which is a copy of the current one, in that case
moving to the target branch is what the user wants, and doesn't
unexpectedly behave differently than --move would.
One outstanding caveat of this implementation is that:
git checkout maint &&
git checkout master &&
git branch -c topic &&
git checkout -
Will check out 'maint' instead of 'master'. This is because the @{-N}
feature (or its -1 shorthand "-") relies on HEAD reflogs created by
the checkout command, so in this case we'll checkout maint instead of
master, as the user might expect. What to do about that is left to a
future change.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, compound reference stores will sometimes need to modify
references in two different reference stores at the same time, meaning
that a single logical reference transaction might have to be
implemented as two internal sub-transactions. They won't want to call
`ref_transaction_commit()` for the two sub-transactions one after the
other, because that wouldn't be atomic (the first commit could succeed
and the second one fail). Instead, they will want to prepare both
sub-transactions (i.e., obtain any necessary locks and do any
pre-checks), and only if both prepare steps succeed, then commit both
sub-transactions.
Start preparing for that day by adding a new, optional
`ref_transaction_prepare()` step to the reference transaction
sequence, which obtains the locks and does any prechecks, reporting
any errors that occur. Also add a `ref_transaction_abort()` function
that can be used to abort a sub-transaction even if it has already
been prepared.
That is on the side of the public-facing API. On the side of the
`ref_store` VTABLE, get rid of `transaction_commit` and instead add
methods `transaction_prepare`, `transaction_finish`, and
`transaction_abort`. A `ref_transaction_commit()` now basically calls
methods `transaction_prepare` then `transaction_finish`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just because the files backend can't retain reflogs for deleted
references is no reason that they shouldn't be supported by the
virtual method interface. Also, `delete_ref()` and `refs_delete_ref()`
have already gained `msg` parameters. Now let's add them to
`delete_refs()` and `refs_delete_refs()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, make it clear that they make copies of the sha1
arguments.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
"git gc" did not interact well with "git worktree"-managed
per-worktree refs.
* nd/worktree-kill-parse-ref:
refs: kill set_worktree_head_symref()
worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
refs: introduce get_worktree_ref_store()
refs: add REFS_STORE_ALL_CAPS
refs.c: make submodule ref store hashmap generic
environment.c: fix potential segfault by get_git_common_dir()
Adjust the callback functions to take struct object_id * instead of
unsigned char *, and modify related static functions accordingly.
Introduce a temporary object_id instance into files_reflog_expire and
copy the SHA-1 value passed in. This is necessary because the sha1
parameter can come indirectly from get_sha1. Without the temporary, it
would require much more refactoring to be able to convert this function.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
70999e9cec (branch -m: update all per-worktree HEADs - 2016-03-27)
added this function in order to update HEADs of all relevant
worktrees, when a branch is renamed.
It, as a public ref api, kind of breaks abstraction when it uses
internal functions of files backend. With the introduction of
refs_create_symref(), we can move back pretty close to the code before
70999e9cec, where create_symref() was used for updating HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend at this point is still aware of the per-repo/worktree
separation in refs, so it can handle a linked worktree.
Some refs operations are known not working when current files-backend is
used in a linked worktree (e.g. reflog). Tests will be written when
refs_* functions start to be called with worktree backend to verify that
they work as expected.
Note: accessing a worktree of a submodule remains unaddressed. Perhaps
after get_worktrees() can access submodule (or rather a new function
get_submodule_worktrees(), that lists worktrees of a submodule), we can
update this function to work with submodules as well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that we can now implement
`refs_verify_refname_available()` based on the other virtual
functions, so there is no need for it to be defined at the backend
level. Instead, define it once in `refs.c` and remove the
`files_backend` definition.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It only has one caller, not worth keeping just for convenience.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transaction struct now takes a ref store at creation and will
operate on that ref store alone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not meant to cover all existing API. It adds enough to test ref
stores with the new test program test-ref-store, coming soon and to be
used by files-backend.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is intended to replace *_submodule() refs API. It provides
a ref store for a specific submodule, which can be operated on by a new
set of refs API.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_ref_store() will soon be renamed to get_submodule_ref_store().
Together with future get_worktree_ref_store(), the three functions
provide an appropriate ref store for different operation modes. New APIs
will be added to operate directly on ref stores.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming the current branch adds an event to the current branch's log
and to HEAD's log. However, the logged entries differ. The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).
Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument. This allows the
creation of the new ref to be recorded in HEAD's log. As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.
It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways. Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events. It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
