Recent optimization broke shallow clones.
* jk/peel-ref:
upload-pack: load non-tip "want" objects from disk
upload-pack: make sure "want" objects are parsed
upload-pack: drop lookup-before-parse optimization
"git cmd -- ':(top'" was not diagnosed as an invalid syntax, and
instead the parser kept reading beyond the end of the string.
* lf/setup-prefix-pathspec:
setup.c: check that the pathspec magic ends with ")"
setup.c: stop prefix_pathspec() from looping past the end of string
"git tag -f <tag>" always said "Updated tag '<tag>'" even when
creating a new tag (i.e. not overwriting nor updating).
* ph/tag-force-no-warn-on-creation:
tag: --force does not have to warn when creating tags
A few workarounds for systems with unsigned time_t.
* mg/unsigned-time-t:
Fix time offset calculation in case of unsigned time_t
date.c: fix unsigned time_t comparison
"git p4" did not behave well when the path to the root of the P4
client was not its real path.
* pw/p4-symlinked-root:
git p4: avoid expanding client paths in chdir
git p4 test: should honor symlink in p4 client root
git p4 test: make sure P4CONFIG relative path works
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in
the middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
In "git reflog expire", REACHABLE bit was not cleared from the
correct objects.
* jc/maint-reflog-expire-clean-mark-typofix:
reflog: fix typo in "reflog expire" clean-up codepath
The logic used by "git diff -M --stat" to shorten the names of
files before and after a rename did not work correctly when the
common prefix and suffix between the two filenames overlapped.
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
The "--match=<pattern>" option of "git describe", when used with
"--all" to allow refs that are not annotated tags to be used as a
base of description, did not restrict the output from the command
to those that match the given pattern.
We may want to have a looser matching that does not restrict to tags,
but that can be done as a follow-up topic; this step is purely a bugfix.
* jc/describe:
describe: --match=<pattern> must limit the refs even when used with --all
Teach "git pull --rebase" to pass "-v/-q" command line options to
underlying "git rebase".
* pe/pull-rebase-v-q:
pull: Apply -q and -v options to rebase mode as well
In the v1.8.0 era, we changed symbols that do not have to be global
to file scope static, but a few functions in graph.c were used by
CGit from sideways bypassing the entry points of the API the
in-tree users use.
* jk/graph-c-expose-symbols-for-cgit:
Revert "graph.c: mark private file-scope symbols as static"
* maint-1.8.1:
bundle: Add colons to list headings in "verify"
bundle: Fix "verify" output if history is complete
Documentation: filter-branch env-filter example
git-filter-branch.txt: clarify ident variables usage
git-compat-util.h: Provide missing netdb.h definitions
describe: Document --match pattern format
Documentation/githooks: Explain pre-rebase parameters
update-index: list supported idx versions and their features
diff-options: unconfuse description of --color
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
"git bundle verify" did not say "records a complete history" for a
bundle that does not have any prerequisites.
* lf/bundle-verify-list-prereqs:
bundle: Add colons to list headings in "verify"
bundle: Fix "verify" output if history is complete
Add an example use of "--env-filter" in "filter-branch"
documentation.
* tk/doc-filter-branch:
Documentation: filter-branch env-filter example
git-filter-branch.txt: clarify ident variables usage
Some sources failed to compile on systems that lack NI_MAXHOST in
their system header.
* dm/ni-maxhost-may-be-missing:
git-compat-util.h: Provide missing netdb.h definitions
The "--match=<pattern>" argument "git describe" takes uses glob
pattern but it wasn't obvious from the documentation.
* gp/describe-match-uses-glob-pattern:
describe: Document --match pattern format
The v4 index format was not documented.
* nd/doc-index-format:
update-index: list supported idx versions and their features
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
The "--color=<when>" argument to the commands in the diff family
was described poorly.
* jc/color-diff-doc:
diff-options: unconfuse description of --color
Historically, we tried to be lenient to "both sides added, slightly
differently" case and as long as the files can be merged using a
made-up common ancestor cleanly, since f7d24bbefb (merge with
/dev/null as base, instead of punting O==empty case, 2005-11-07).
This was later further refined to use a better made-up common file
with fd66dbf529 (merge-one-file: use empty- or common-base
condintionally in two-stage merge., 2005-11-10), but the spirit has
been the same.
But the original fix in f7d24bbefb to avoid punting on "both sides
added" case had a code to unconditionally error out the merge. When
this triggers, even though the content-level merge can be done
cleanly, we end up not saying "content conflict" in the message, but
still issue the error message, showing "ERROR: in <pathname>".
Move that "always fail for add/add conflict" logic a bit higher to
fix this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To a human reader, it is quite obvious that cmp is assigned before
it is used, but gcc 4.6.3 that ships with Ubuntu 12.04 is among
those that do not get this right.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "funny filename" comment was from b539c5e8fb (git-merge-one:
new merge world order., 2005-12-07) where the removed code just
before that new comment ended with:
merge "$4" "$orig" "$src2"
(yes, we used to use "merge" program from the RCS suite). The
comment refers to one of the bad side effect the old code used to
have and warns against such a practice, i.e. it was talking about
the code that no longer existed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume default configuration at entry,
and to reset the modified configuration variables at the end.
Test 'merge log message' was relying on the presence of option `--no-ff`
in the configuration. With the option, git show -s --pretty=format:%b HEAD
produces an empty line and without the option, it produces an empty file.
The test is modified to check with and without `--no-ff` option.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using test_config ensure the configuration variable are removed
at the end of the test, there's no need to remove variable
at the beginning of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fread returns the number of items read, with no special error return.
Commit 98f85ff (reflog: add for_each_reflog_ent_reverse() API -
2013-03-08) introduced a call to fread which checks for an error with
"nread < 0" which is tautological since nread is unsigned. The correct
check in this case (which tries to read a single item) is "nread != 1".
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asking Git to merge a tag (such as a signed tag or annotated tag),
it will always create a merge commit even if fast-forward was possible.
It's like having --no-ff present on the command line.
It's a difference from the default behavior described in git-merge.txt.
It should be documented as an exception of "FAST-FORWARD MERGE" section
and "--ff" option description.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before talking about notations such as optional [--option] enclosed
in brackets, state that the documents are in AsciiDoc and processed
into other formats.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
diff.c: diff.renamelimit => diff.renameLimit in message
wt-status: fix possible use of uninitialized variable
fast-import: clarify "inline" logic in file_change_m
run-command: always set failed_errno in start_command
transport: drop "int cmp = cmp" hack
drop some obsolete "x = x" compiler warning hacks
fast-import: use pointer-to-pointer to keep list tail
In the warning message printed when rename or unmodified copy
detection was skipped due to too many files, change "diff.renamelimit"
to "diff.renameLimit", in order to make it consistent with git
documentation, which consistently uses "diff.renameLimit".
Signed-off-by: Max Nanasy <max.nanasy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
