* maint-2.35:
Git 2.35.4
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.34:
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.33:
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.30:
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
Since 8d92fb2927 (dir: replace exponential algorithm with a linear one,
2020-04-01) traversing into a repository's directory tree when the
traversal began outside the repository's standard location has failed
because the encountered repository was identified as a nested foreign
repository.
Prior to this commit, the failure to traverse into a repository's
default worktree location was observable from a user's perspective under
either of the following conditions (there may be others):
1) Set the `core.worktree` location to a parent directory of the
default worktree; or
2) Use the `--git_dir` option while the working directory is outside
the repository's default worktree location
Under either of these conditions, symptoms of the failure to traverse
into the repository's default worktree location include the inability to
add files to the index or get a list of untracked files via ls-files.
This commit adds a check to determine whether a nested repository that
is encountered in recursing a path is actually `the_repository`. If so,
we simply treat the directory as if it doesn't contain a nested
repository.
The commit includes test-cases to reduce the likelihood of future
regressions.
Signed-off-by: Goss Geppert <ggossdev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The many test_configured_prune tests in t5510-fetch.sh test many
combinations of --prune, --prune-tags, and using 'origin' or an explicit
URL. Some machinery was introduced in e1790f9245 (fetch tests: fetch
<url> <spec> as well as fetch [<remote>], 2018-02-09) to replace
'origin' with this explicit URL. This URL is a "file:///" URL for the
root of the $TRASH_DIRECTORY.
However, if the current build tree has an '@' symbol, the
replacement using perl fails. It drops the '@' as well as anything
else in that directory name. You can observe this locally by
cloning git.git into a "victim@03" directory and running the test
script.
As we are writing in Perl anyway, pass in the shell variables involved
to the script as arguments and perform necessary string transformations
inside it, instead of assuming that it is sufficient to enclose the
$remote_url variable inside a pair of single quotes.
Reported-by: Randall Becker <rsbecker@nexbridge.com>
Original-patch-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash command line prompt (in contrib/) update.
* jp/prompt-clear-before-upstream-mark:
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Improve test coverage with a handful of tests.
* ds/more-test-coverage:
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
va_list ap, cp;
va_copy(cp, ap);
va_start(ap, fmt);
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a 'git repack --cruft -d' with the wrapper 'git gc --cruft' to
exercise some logic in builtin/gc.c that adds the '--cruft' option to
the underlying 'git repack' command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--verbose' option reports what is being added and removed from the
index, but has not been tested up to this point. Augment the tests in
t2107 to check the '--verbose' option in some scenarios.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789 (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "fetch.credentialsInUrl" configuration variable introduced
in 6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06) to "transfer".
There are existing exceptions, but generally speaking the
"<namespace>.<var>" configuration should only apply to command
described in the "namespace" (and its sub-commands, so e.g. "clone.*"
or "fetch.*" might also configure "git-remote-https").
But in the case of "fetch.credentialsInUrl" we've got a configuration
variable that configures the behavior of all of "clone", "push" and
"fetch", someone adjusting "fetch.*" configuration won't expect to
have the behavior of "git push" altered, especially as we have the
pre-existing "{transfer,fetch,receive}.fsckObjects", which configures
different parts of the transfer dialog.
So let's move this configuration variable to the "transfer" namespace
before it's exposed in a release. We could add all of
"{transfer,fetch,pull}.credentialsInUrl" at some other time, but once
we have "fetch" configure "pull" such an arrangement would would be a
confusing mess, as we'd at least need to have "fetch" configure
"push" (but not the other way around), or change existing behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue that existed before 0527ccb1b5 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc8 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0 (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Test Summary Report
-------------------
./t3701-add-interactive.sh (Wstat: 0 Tests: 70 Failed: 0)
TODO passed: 45, 47
Files=1, Tests=70, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.33 csys = 1.22 CPU)
Result: PASS
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b5 with a
new "ADD_I_USE_BUILTIN" prerequisite.
1. https://lore.kernel.org/git/patch-1.7-4624abc2591-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "fetch.credentialsInUrl" configuration variable controls what
happens when a URL with embedded login credential is used.
* ds/credentials-in-url:
remote: create fetch.credentialsInUrl config
Updating the graft information invalidates the list of parents of
in-core commit objects that used to be in the graft file.
* jt/unparse-commit-upon-graft-change:
commit,shallow: unparse commits if grafts changed
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
A misconfigured 'branch..remote' led to a bug in configuration
parsing.
* gc/zero-length-branch-config-fix:
remote.c: reject 0-length branch names
remote.c: don't BUG() on 0-length branch names
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
Because of the wrapping of the branch name variable $b, the colour codes
in the variable don't get applied, but are instead printed directly in
the output. Move the wrapping of $b to before colour codes are inserted
to correct this. Revert move of branch name colour codes in tests, as
the branch name is now coloured after the wrapping instead of before.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve-undo extension was added to the index in cfc5789a
(resolve-undo: record resolved conflicts in a new index extension
section, 2009-12-25). This extension records the blob object names
and their modes of conflicted paths when the path gets resolved
(e.g. with "git add"), to allow "undoing" the resolution with
"checkout -m path". These blob objects should be guarded from
garbage-collection while we have the resolve-undo information in the
index (otherwise unresolve operation may try to use a blob object
that has already been pruned away).
But the code called from mark_reachable_objects() for the index
forgets to do so. Teach add_index_objects_to_pending() helper to
also add objects referred to by the resolve-undo extension.
Also make matching changes to "fsck", which has code that is fairly
similar to the reachability stuff, but have parallel implementations
for all these stuff, which may (or may not) someday want to be unified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
source: <20220421044233.894255-1-alexhenrie24@gmail.com>
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
Avoid problems from interaction between malloc_check and address
sanitizer.
source: <pull.1210.git.1649507317350.gitgitgadget@gmail.com>
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
The commit summary shown after making a commit is matched to what
is given in "git status" not to use the break-rewrite heuristics.
source: <c35bd0aa-2e46-e710-2b39-89f18bad0097@web.de>
* rs/commit-summary-wo-break-rewrite:
commit, sequencer: turn off break_opt for commit summary
A bit of test framework fixes with a few fixes to issues found by
valgrind.
source: <20220512223218.237544-1-gitster@pobox.com>
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
source: <xmqqh76mf7s4.fsf_-_@gitster.g>
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
Test that "git config --show-scope" shows the "worktree" scope, and add
it to the list of scopes in Documentation/git-config.txt.
"git config --help" does not need to be updated because it already
mentions "worktree".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A git subcommand like "git add -p" spawns a separate git process
while relaying its command line arguments. A pathspec with only
negative elements was mistakenly passed with an empty string, which
has been corrected.
* jc/all-negative-pathspec:
pathspec: correct an empty string used as a pathspec element
Implementation of "scalar diagnose" subcommand.
* js/scalar-diagnose:
scalar: teach `diagnose` to gather loose objects information
scalar: teach `diagnose` to gather packfile info
scalar diagnose: include disk space information
scalar: implement `scalar diagnose`
scalar: validate the optional enlistment argument
archive --add-virtual-file: allow paths containing colons
archive: optionally add "virtual" files
Update the GitHub workflow support to make it quicker to get to the
failing test.
* js/ci-github-workflow-markup:
ci: call `finalize_test_case_output` a little later
ci(github): mention where the full logs can be found
ci: use `--github-workflow-markup` in the GitHub workflow
ci(github): avoid printing test case preamble twice
ci(github): skip the logs of the successful test cases
ci: optionally mark up output in the GitHub workflow
ci/run-build-and-tests: add some structure to the GitHub workflow output
ci: make it easier to find failed tests' logs in the GitHub workflow
ci/run-build-and-tests: take a more high-level view
test(junit): avoid line feeds in XML attributes
tests: refactor --write-junit-xml code
ci: fix code style
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
Fix a regression reported[1] against f443246b9f (commit: convert
{pre-commit,prepare-commit-msg} hook to hook.h, 2021-12-22): Due to
using the run_process_parallel() API in the earlier 96e7225b31 (hook:
add 'run' subcommand, 2021-12-22) we'd capture the hook's stderr and
stdout, and thus lose the connection to the TTY in the case of
e.g. the "pre-commit" hook.
As a preceding commit notes GNU parallel's similar --ungroup option
also has it emit output faster. While we're unlikely to have hooks
that emit truly massive amounts of output (or where the performance
thereof matters) it's still informative to measure the overhead. In a
similar "seq" test we're now ~30% faster:
$ cat .git/hooks/seq-hook; git hyperfine -L rev origin/master,HEAD~0 -s 'make CFLAGS=-O3' './git hook run seq-hook'
#!/bin/sh
seq 100000000
Benchmark 1: ./git hook run seq-hook' in 'origin/master
Time (mean ± σ): 787.1 ms ± 13.6 ms [User: 701.6 ms, System: 534.4 ms]
Range (min … max): 773.2 ms … 806.3 ms 10 runs
Benchmark 2: ./git hook run seq-hook' in 'HEAD~0
Time (mean ± σ): 603.4 ms ± 1.6 ms [User: 573.1 ms, System: 30.3 ms]
Range (min … max): 601.0 ms … 606.2 ms 10 runs
Summary
'./git hook run seq-hook' in 'HEAD~0' ran
1.30 ± 0.02 times faster than './git hook run seq-hook' in 'origin/master'
1. https://lore.kernel.org/git/CA+dzEBn108QoMA28f0nC8K21XT+Afua0V2Qv8XkR8rAeqUCCZw@mail.gmail.com/
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
[jc: minor fix-up to tests for consistency]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the parallel execution API added in c553c72eed (run-command:
add an asynchronous parallel child processor, 2015-12-15) to support a
mode where the stdout and stderr of the processes isn't captured and
output in a deterministic order, instead we'll leave it to the kernel
and stdio to sort it out.
This gives the API same functionality as GNU parallel's --ungroup
option. As we'll see in a subsequent commit the main reason to want
this is to support stdout and stderr being connected to the TTY in the
case of jobs=1, demonstrated here with GNU parallel:
$ parallel --ungroup 'test -t {} && echo TTY || echo NTTY' ::: 1 2
TTY
TTY
$ parallel 'test -t {} && echo TTY || echo NTTY' ::: 1 2
NTTY
NTTY
Another is as GNU parallel's documentation notes a potential for
optimization. As demonstrated in next commit our results with "git
hook run" will be similar, but generally speaking this shows that if
you want to run processes in parallel where the exact order isn't
important this can be a lot faster:
$ hyperfine -r 3 -L o ,--ungroup 'parallel {o} seq ::: 10000000 >/dev/null '
Benchmark 1: parallel seq ::: 10000000 >/dev/null
Time (mean ± σ): 220.2 ms ± 9.3 ms [User: 124.9 ms, System: 96.1 ms]
Range (min … max): 212.3 ms … 230.5 ms 3 runs
Benchmark 2: parallel --ungroup seq ::: 10000000 >/dev/null
Time (mean ± σ): 154.7 ms ± 0.9 ms [User: 136.2 ms, System: 25.1 ms]
Range (min … max): 153.9 ms … 155.7 ms 3 runs
Summary
'parallel --ungroup seq ::: 10000000 >/dev/null ' ran
1.42 ± 0.06 times faster than 'parallel seq ::: 10000000 >/dev/null '
A large part of the juggling in the API is to make the API safer for
its maintenance and consumers alike.
For the maintenance of the API we e.g. avoid malloc()-ing the
"pp->pfd", ensuring that SANITIZE=address and other similar tools will
catch any unexpected misuse.
For API consumers we take pains to never pass the non-NULL "out"
buffer to an API user that provided the "ungroup" option. The
resulting code in t/helper/test-run-command.c isn't typical of such a
user, i.e. they'd typically use one mode or the other, and would know
whether they'd provided "ungroup" or not.
We could also avoid the strbuf_init() for "buffered_output" by having
"struct parallel_processes" use a static PARALLEL_PROCESSES_INIT
initializer, but let's leave that cleanup for later.
Using a global "run_processes_parallel_ungroup" variable to enable
this option is rather nasty, but is being done here to produce as
minimal of a change as possible for a subsequent regression fix. This
change is extracted from a larger initial version[1] which ends up
with a better end-state for the API, but in doing so needed to modify
all existing callers of the API. Let's defer that for now, and
narrowly focus on what we need for fixing the regression in the
subsequent commit.
It's safe to do this with a global variable because:
A) hook.c is the only user of it that sets it to non-zero, and before
we'll get any other API users we'll refactor away this method of
passing in the option, i.e. re-roll [1].
B) Even if hook.c wasn't the only user we don't have callers of this
API that concurrently invoke this parallel process starting API
itself in parallel.
As noted above "A" && "B" are rather nasty, and we don't want to live
with those caveats long-term, but for now they should be an acceptable
compromise.
1. https://lore.kernel.org/git/cover-v2-0.8-00000000000-20220518T195858Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short upstream state indicator inherits the colour of the last short
state indicator before it (if there is one), and the sparsity state
indicator inherits this colour as well. This behaviour was introduced by
0ec7c23cdc (git-prompt: make upstream state indicator location
consistent, 2022-02-27), while before this change the aforementioned
indicators were white/the default text colour. Some examples to
illustrate this behaviour (assuming all indicators are enabled and
colourization is on):
* If there is something in the stash, both the '$' and the short
upstream state indicator following it will be blue.
* If the local tree has new, untracked files and there is nothing in
the stash, both the '%' and the short upstream state indicator
will be red.
* If all local changes are added to the index and the stash is empty,
both the '+' and the short upstream state indicator following it will
be green.
* If the local tree is clean and there is nothing in the stash, the
short upstream state indicator will be white/${default text colour}.
This appears to be an unintended side-effect of the change, and makes
little sense semantically (e.g. why is it bad to be in sync with
upstream when you have uncommitted local changes?). The cause of the
change in colourization is that previously, the short upstream state
indicator appeared immediately after the rebase/revert/bisect/merge
state indicator (note the position of $p in $gitstring):
local f="$h$w$i$s$u"
local gitstring="$c$b${f:+$z$f}${sparse}$r$p"
Said indicator is prepended with the clear colour code, and the short
upstream state indicator is thus also uncoloured. Now, the short
upstream state indicator follows the sequence of colourized indicators,
without any clearing of colour (again note the position of $p, now in
$f):
local f="$h$w$i$s$u$p"
local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}"
If the user is in a sparse checkout, the sparsity state indicator
follows a similar pattern to the short upstream state indicator.
However, clearing colour of the colourized indicators changes how the
sparsity state indicator is colourized, as it currently inherits (and
before the change referenced also inherited) the colour of the last
short state indicator before it. Reading the commit message of the
change that introduced the sparsity state indicator, afda36dbf3
(git-prompt: include sparsity state as well, 2020-06-21), it appears
this colourization also was unintended, so clearing the colour for said
indicator further increases consistency.
Make the colourization of these state indicators consistent by making
all colourized indicators clear their own colour. Make colouring of $c
dependent on it not being empty, as it is no longer being used to colour
the branch name. Move clearing of $b's prefix to before colourization so
it gets cleared properly when colour codes are inserted into it. These
changes make changing the layout of the prompt less prone to unintended
colour changes in the future.
Change coloured Bash prompt tests to reflect the colourization changes:
* Move the colour codes to wrap the expected content of the expanded
$__git_ps1_branch_name in all tests.
* Insert a clear-colour code after the symbol for the first indicator
in "prompt - bash color pc mode - dirty status indicator - dirty
index and worktree", to reflect that all indicators should clear
their own colour.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After generating diffs for each range to be compared using a 'git log'
invocation, range-diff.c::read_patches looks for the "diff --git" header
in those diffs to recognize the beginning of a new change.
In a project with submodules, and with 'diff.submodule=log' set in the
config, this header is missing for the diff of a changed submodule, so
any submodule changes are quietly ignored in the range-diff.
When 'diff.submodule=diff' is set in the config, the "diff --git" header
is also missing for the submodule itself, but is shown for submodule
content changes, which can easily confuse 'git range-diff' and lead to
errors such as:
error: git apply: bad git-diff - inconsistent old filename on line 1
error: could not parse git header 'diff --git path/to/submodule/and/some/file/within
'
error: could not parse log for '@{u}..@{1}'
Force the submodule diff format to its default ("short") when invoking
'git log' to generate the patches for each range, such that submodule
changes are always detected.
Add a test, including an invocation with '--creation-factor=100' to
force the second commit in the range not to be considered a complete
rewrite, in order to verify we do indeed get the "short" format.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit is parsed, it pretends to have a different (possibly
empty) list of parents if there is graft information for that commit.
But there is a bug that could occur when a commit is parsed, the graft
information is updated (for example, when a shallow file is rewritten),
and the same commit is subsequently used: the parents of the commit do
not conform to the updated graft information, but the information at the
time of parsing.
This is usually not an issue, as a commit is usually introduced into the
repository at the same time as its graft information. That means that
when we try to parse that commit, we already have its graft information.
But it is an issue when fetching a shallow point directly into a
repository with submodules. The function
assign_shallow_commits_to_refs() parses all sought objects (including
the shallow point, which we are directly fetching). In update_shallow()
in fetch-pack.c, assign_shallow_commits_to_refs() is called before
commit_shallow_file(), which means that the shallow point would have
been parsed before graft information is updated. Once a commit is
parsed, it is no longer sensitive to any graft information updates. This
parsed commit is subsequently used when we do a revision walk to search
for submodules to fetch, meaning that the commit is considered to have
parents even though it is a shallow point (and therefore should be
treated as having no parents).
Therefore, whenever graft information is updated, mark the commits that
were previously grafts and the commits that are newly grafts as
unparsed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users sometimes provide a "username:password" combination in their
plaintext URLs. Since Git stores these URLs in plaintext in the
.git/config file, this is a very insecure way of storing these
credentials. Credential managers are a more secure way of storing this
information.
System administrators might want to prevent this kind of use by users on
their machines.
Create a new "fetch.credentialsInUrl" config option and teach Git to
warn or die when seeing a URL with this kind of information. The warning
anonymizes the sensitive information of the URL to be clear about the
issue.
This change currently defaults the behavior to "allow" which does
nothing with these URLs. We can consider changing this behavior to
"warn" by default if we wish. At that time, we may want to add some
advice about setting fetch.credentialsInUrl=ignore for users who still
want to follow this pattern (and not receive the warning).
An earlier version of this change injected the logic into
url_normalize() in urlmatch.c. While most code paths that parse URLs
eventually normalize the URL, that normalization does not happen early
enough in the stack to avoid attempting connections to the URL first. By
inserting a check into the remote validation, we identify the issue
before making a connection. In the old code path, this was revealed by
testing the new t5601-clone.sh test under --stress, resulting in an
instance where the return code was 13 (SIGPIPE) instead of 128 from the
die().
However, we can reuse the parsing information from url_normalize() in
order to benefit from its well-worn parsing logic. We can use the struct
url_info that is created in that method to replace the password with
"<redacted>" in our error messages. This comes with a slight downside
that the normalized URL might look slightly different from the input URL
(for instance, the normalized version adds a closing slash). This should
not hinder users figuring out what the problem is and being able to fix
the issue.
As an attempt to ensure the parsing logic did not catch any
unintentional cases, I modified this change locally to to use the "die"
option by default. Running the test suite succeeds except for the
explicit username:password URLs used in t5550-http-fetch-dumb.sh and
t5541-http-push-smart.sh. This means that all other tested URLs did not
trigger this logic.
The tests show that the proper error messages appear (or do not
appear), but also count the number of error messages. When only warning,
each process validates the remote URL and outputs a warning. This
happens twice for clone, three times for fetch, and once for push.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to pack unreachable objects into a "cruft pack",
instead of ejecting them into loose form to be reclaimed later, has
been introduced.
* tb/cruft-packs:
sha1-file.c: don't freshen cruft packs
builtin/gc.c: conditionally avoid pruning objects via loose
builtin/repack.c: add cruft packs to MIDX during geometric repack
builtin/repack.c: use named flags for existing_packs
builtin/repack.c: allow configuring cruft pack generation
builtin/repack.c: support generating a cruft pack
builtin/pack-objects.c: --cruft with expiration
reachable: report precise timestamps from objects in cruft packs
reachable: add options to add_unseen_recent_objects_to_traversal
builtin/pack-objects.c: --cruft without expiration
builtin/pack-objects.c: return from create_object_entry()
t/helper: add 'pack-mtimes' test-tool
pack-mtimes: support writing pack .mtimes files
chunk-format.h: extract oid_version()
pack-write: pass 'struct packing_data' to 'stage_tmp_packfiles'
pack-mtimes: support reading .mtimes files
Documentation/technical: add cruft-packs.txt
Teach "git repack --geometric" work better with "--keep-pack" and
avoid corrupting the repository when packsize limit is used.
* tb/geom-repack-with-keep-and-max:
builtin/repack.c: ensure that `names` is sorted
t7703: demonstrate object corruption with pack.packSizeLimit
repack: respect --keep-pack with geometric repack
"sparse-checkout" learns to work well with the sparse-index
feature.
* ds/sparse-sparse-checkout:
sparse-checkout: integrate with sparse index
p2000: add test for 'git sparse-checkout [add|set]'
sparse-index: complete partial expansion
sparse-index: partially expand directories
sparse-checkout: --no-sparse-index needs a full index
cache-tree: implement cache_tree_find_path()
sparse-index: introduce partially-sparse indexes
sparse-index: create expand_index()
t1092: stress test 'git sparse-checkout set'
t1092: refactor 'sparse-index contents' test
Introduce a filesystem-dependent mechanism to optimize the way the
bits for many loose object files are ensured to hit the disk
platter.
* ns/batch-fsync:
core.fsyncmethod: performance tests for batch mode
t/perf: add iteration setup mechanism to perf-lib
core.fsyncmethod: tests for batch mode
test-lib-functions: add parsing helpers for ls-files and ls-tree
core.fsync: use batch mode and sync loose objects by default on Windows
unpack-objects: use the bulk-checkin infrastructure
update-index: use the bulk-checkin infrastructure
builtin/add: add ODB transaction around add_files_to_cache
cache-tree: use ODB transaction around writing a tree
core.fsyncmethod: batched disk flushes for loose-objects
bulk-checkin: rebrand plug/unplug APIs as 'odb transactions'
bulk-checkin: rename 'state' variable and separate 'plugged' boolean
Deprecate non-cone mode of the sparse-checkout feature.
* en/sparse-cone-becomes-default:
Documentation: some sparsity wording clarifications
git-sparse-checkout.txt: mark non-cone mode as deprecated
git-sparse-checkout.txt: flesh out pattern set sections a bit
git-sparse-checkout.txt: add a new EXAMPLES section
git-sparse-checkout.txt: shuffle some sections and mark as internal
git-sparse-checkout.txt: update docs for deprecation of 'init'
git-sparse-checkout.txt: wording updates for the cone mode default
sparse-checkout: make --cone the default
tests: stop assuming --no-cone is the default mode for sparse-checkout
Add a test for the regression introduced in my 9c4d58ff2c (ls-tree:
split up "fast path" callbacks, 2022-03-23) and fixed in
350296cc78 (ls-tree: `-l` should not imply recursive listing,
2022-04-04), and test for the test of ls-tree option/mode combinations
to make sure we don't have other blind spots.
The setup for these tests can be shared with those added in the
1041d58b4d (Merge branch 'tl/ls-tree-oid-only', 2022-04-04) topic, so
let's create a new t/lib-t3100.sh to help them share data.
The existing tests in "t3104-ls-tree-format.sh" didn't deal with a
submodule, which they'll now encounter with as the
setup_basic_ls_tree_data() sets one up.
This extensive testing should give us confidence that there were no
further regressions in this area. The lack of testing was noted back
in [1], but unfortunately we didn't cover that blind-spot before
9c4d58ff2c.
1. https://lore.kernel.org/git/211115.86o86lqe3c.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a bug() function to use in cases where we'd like to indicate a
runtime BUG(), but would like to defer the BUG() call because we're
possibly accumulating more bug() callers to exhaustively indicate what
went wrong.
We already have this sort of facility in various parts of the
codebase, just in the form of ad-hoc re-inventions of the
functionality that this new API provides. E.g. this will be used to
replace optbug() in parse-options.c, and the 'error("BUG:[...]' we do
in a loop in builtin/receive-pack.c.
Unlike the code this replaces we'll log to trace2 with this new bug()
function (as with other usage.c functions, including BUG()), we'll
also be able to avoid calls to xstrfmt() in some cases, as the bug()
function itself accepts variadic sprintf()-like arguments.
Any caller to bug() can follow up such calls with BUG_if_bug(),
which will BUG() out (i.e. abort()) if there were any preceding calls
to bug(), callers can also decide not to call BUG_if_bug() and leave
the resulting BUG() invocation until exit() time. There are currently
no bug() API users that don't call BUG_if_bug() themselves after a
for-loop, but allowing for not calling BUG_if_bug() keeps the API
flexible. As the tests and documentation here show we'll catch missing
BUG_if_bug() invocations in our exit() wrapper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the HTML Standard FAQ:
“What is the DOCTYPE for modern HTML documents?
In text/html documents:
<!DOCTYPE html>
In documents delivered with an XML media type: no DOCTYPE is required
and its use is generally unnecessary. However, you may use one if you
want (see the following question). Note that the above is well-formed
XML.”
Source: [1]
Gitweb uses an XHTML 1.0 DOCTYPE:
<!DOCTYPE html PUBLIC
"-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
While that DOCTYPE is still valid [2], it has several disadvantages:
1. It’s misleading. If an XML parser uses the DTD at the given link,
then the entities and ⋅ won’t get declared. Instead, the
parser has to use a DTD from the HTML Standard that has nothing to do
with XHTML 1.0 [2].
2. It’s obsolete. XHTML 1.0 was last revised in 2002 and was superseded in
2018 [3].
3. It’s unreliable. Gitweb uses and ⋅ but lets an external file
define them. “[…U]using entity references for characters in XML documents
is unsafe if they are defined in an external file (except for <, >,
&, ", and ').” [4]
[1]: <https://github.com/whatwg/html/blob/main/FAQ.md#what-is-the-doctype-for-modern-html-documents>
[2]: <https://html.spec.whatwg.org/multipage/xhtml.html#parsing-xhtml-documents>
[3]: <https://www.w3.org/TR/xhtml1/#xhtml>
[4]: <https://html.spec.whatwg.org/multipage/xhtml.html#writing-xhtml-documents>
Signed-off-by: Jason Yundt <jason@jasonyundt.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Branch names can't be empty, so config keys with an empty branch name,
e.g. "branch..remote", are silently ignored.
Since these config keys will never be useful, make it a fatal error when
remote.c finds a key that starts with "branch." and has an empty
subsection.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4a2dcb1a08 (remote: die if branch is not found in repository,
2021-11-17) introduced a regression where multiple config entries with
an empty branch name, e.g.
[branch ""]
remote = foo
merge = bar
could cause Git to fail when it tries to look up branch tracking
information.
We parse the config key to get (branch name, branch name length), but
when the branch name subsection is empty, we get a bogus branch name,
e.g. "branch..remote" gives (".remote", 0). We continue to use the bogus
branch name as if it were valid, and prior to 4a2dcb1a08, this wasn't an
issue because length = 0 caused the branch name to effectively be ""
everywhere.
However, that commit handles length = 0 inconsistently when we create
the branch:
- When find_branch() is called to check if the branch exists in the
branch hash map, it interprets a length of 0 to mean that it should
call strlen on the char pointer.
- But the code path that inserts into the branch hash map interprets a
length of 0 to mean that the string is 0-length.
This results in the bug described above:
- "branch..remote" looks for ".remote" in the branch hash map. Since we
do not find it, we insert the "" entry into the hash map.
- "branch..merge" looks for ".merge" in the branch hash map. Since we
do not find it, we again try to insert the "" entry into the hash map.
However, the entries in the branch hash map are supposed to be
appended to, not overwritten.
- Since overwriting an entry is a BUG(), Git fails instead of silently
ignoring the empty branch name.
Fix the bug by removing the convenience strlen functionality, so that
0 means that the string is 0-length. We still insert a bogus branch name
into the hash map, but this will be fixed in a later commit.
Reported-by: "Ing. Martin Prantl Ph.D." <perry@ntis.zcu.cz>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 'revert' and 'cherry-pick' share a lot of code, it is easy to
modify the behaviour of one command and inadvertently affect the
other. An earlier change to teach the '--reference' option and the
'revert.reference' configuration variable to the former was not
careful enough and 'cherry-pick --reference' wasn't rejected as an
error.
It is possible to think 'cherry-pick -x' might benefit from the
'--reference' option, but it is fundamentally different from
'revert' in at least two ways to make it questionable:
- 'revert' names a commit that is ancestor of the resulting commit,
so an abbreviated object name with human readable title is
sufficient to identify the named commit uniquely without using
the full object name. On the other hand, 'cherry-pick'
usually [*] picks a commit that is not an ancestor. It might be
even picking a private commit that never becomes part of the
public history.
- The whole commit message of 'cherry-pick' is a copy of the
original commit, and there is nothing gained to repeat only the
title part on 'cherry-picked from' message.
[*] well, you could revert and then you can pick the original that
was reverted to get back to where you were, but then you can
revert the revert to do the same thing.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -i" was rewritten in C some time ago and has been in
testing; the reimplementation is now exposed to general public by
default.
* js/use-builtin-add-i:
add -i: default to the built-in implementation
t2016: require the PERL prereq only when necessary
The tests that ensured merges stop when interfering local changes
are present did not make sure that local changes are preserved; now
they do.
* jc/t6424-failing-merge-preserve-local-changes:
t6424: make sure a failed merge preserves local changes
With the new http.curloptResolve configuration, the CURLOPT_RESOLVE
mechanism that allows cURL based applications to use pre-resolved
IP addresses for the requests is exposed to the scripts.
* cc/http-curlopt-resolve:
http: add custom hostname to IP address resolutions
By allowing the path to be enclosed in double-quotes, we can avoid
the limitation that paths cannot contain colons.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the `--add-virtual-file=<path>:<content>` option, `git archive` now
supports use cases where relatively trivial files need to be added that
do not exist on disk.
This will allow us to generate `.zip` files with generated content,
without having to add said content to the object database and without
having to write it out to disk.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jc: tweaked <path> handling]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pathspecs with only negative elements did not work with some
commands that pass the pathspec along to a subprocess. For
instance,
$ git add -p -- ':!*.txt'
should add everything except for paths ending in ".txt", but it gets
complaint from underlying "diff-index" and aborts.
We used to error out when a pathspec with only negative elements in
it, like the one in the above example. Later, 859b7f1d (pathspec:
don't error out on all-exclusionary pathspec patterns, 2017-02-07)
updated the logic to add an empty string as an extra element. The
intention was to let the extra element to match everything and let
the negative ones given by the user to subtract from it.
At around the same time, we were migrating from "an empty string is
a valid pathspec element that matches everything" to "either a dot
or ":/" is used to match all, and an empty string is rejected",
between d426430e (pathspec: warn on empty strings as pathspec,
2016-06-22) and 9e4e8a64 (pathspec: die on empty strings as
pathspec, 2017-06-06). I think 9e4e8a64, which happened long after
859b7f1d happened, was not careful enough to turn the empty string
859b7f1d added to either a dot or ":/".
A care should be taken as the definition of "everything" depends on
subcommand. For the purpose of "add -p", adding a "." to add
everything in the current directory is the right thing to do. But
for some other commands, ":/" (i.e. really really everything, even
things outside the current subdirectory) is the right choice.
We would break commands in a big way if we get this wrong, so add a
handful of test pieces to make sure the resulting code still
excludes the paths that are expected and includes "everything" else.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical "git revert" commit uses the full title of the original
commit in its title, and starts its body of the message with:
This reverts commit 8fa7f667cf61386257c00d6e954855cc3215ae91.
This does not encourage the best practice of describing not just
"what" (i.e. "Revert X" on the title says what we did) but "why"
(i.e. and it does not say why X was undesirable).
We can instead phrase this first line of the body to be more like
This reverts commit 8fa7f667 (do this and that, 2022-04-25)
so that the title does not have to be
Revert "do this and that"
We can instead use the title to describe "why" we are reverting the
original commit.
Introduce the "--reference" option to "git revert", and also the
revert.reference configuration variable, which defaults to false, to
tweak the title and the first line of the draft commit message for
when creating a "revert" commit.
When this option is in use, the first line of the pre-filled editor
buffer becomes a comment line that tells the user to say _why_. If
the user exits the editor without touching this line by mistake,
what we prepare to become the first line of the body, i.e. "This
reverts commit 8fa7f667 (do this and that, 2022-04-25)", ends up to
be the title of the resulting commit. This behaviour is designed to
help such a user to identify such a revert in "git log --oneline"
easily so that it can be further reworded with "git rebase -i" later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the tests that exercise implicit shutdown cases
to make them more robust and less racy.
The fsmonitor--daemon will implicitly shutdown in a variety
of situations, such as when the ".git" directory is deleted
or renamed.
The existing tests would delete or rename the directory, sleep
for one second, and then check the status of the daemon. This
is racy, since the client/status command has no way to sync
with the daemon. This was noticed occasionally on very slow
CI build machines where it would cause a random test to fail.
Replace the simple sleep with a sleep-and-retry loop.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test in t7527 to verify that we get a stray warning from
`git fsmonitor--daemon start` when indirectly called from
`git submodule absorbgitdirs`.
Update `git fsmonitor--daemon` to take (and ignore) the `--super-prefix`
argument to suppress the warning.
When we have:
1. a submodule with a `sub/.git/` directory (rather than a `sub/.git`
file).
2. `core.fsmonitor` is turned on in the submodule, but the daemon is
not yet started in the submodule.
3. and someone does a `git submodule absorbgitdirs` in the super.
Git will recursively invoke `git submodule--helper absorb-git-dirs`
in the submodule. This will read the index and may attempt to start
the fsmonitor--daemon with the `--super-prefix` argument.
`git fsmonitor--daemon start` does not accept the `--super-prefix`
argument and causes a warning to be issued.
This does not cause a problem because the `refresh_index()` code
assumes a trivial response if the daemon does not start.
The net-net is a harmelss, but stray warning. Lets eliminate the
warning.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Confirm that the daemon reports events using the on-disk
spelling for Unicode NFC/NFD characters. On APFS we still
have Unicode aliasing, so we cannot create two files that
only differ by NFC/NFD, but the on-disk format preserves
the spelling used to create the file. On HFS+ we also
have aliasing, but the path is always stored on disk in
NFD.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a set of prereqs to help understand how file names
are handled by the filesystem when they contain NFC and NFD
Unicode characters.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that FS events from the OS are received using the preserved,
on-disk spelling of files/directories rather than spelling used
to make the change.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Never set CE_FSMONITOR_VALID on the cache-entry of submodule
directories.
During a client command like 'git status', we may need to recurse
into each submodule to compute a status summary for the submodule.
Since the purpose of the ce_flag is to let Git avoid scanning a
cache-entry, setting the flag causes the recursive call to be
avoided and we report incorrect (no status) for the submodule.
We created an OS watch on the root directory of our working
directory and we receive events for everything in the cone
under it. When submodules are present inside our working
directory, we receive events for both our repo (the super) and
any subs within it. Since our index doesn't have any information
for items within the submodules, we can't use those events.
We could try to truncate the paths of those events back to the
submodule boundary and mark the GITLINK as dirty, but that
feels expensive since we would have to prefix compare every FS
event that we receive against a list of submodule roots. And
it still wouldn't be sufficient to correctly report status on
the submodule, since we don't have any space in the cache-entry
to cache the submodule's status (the 'SCMU' bits in porcelain
V2 speak). That is, the CE_FSMONITOR_VALID bit just says that
we don't need to scan/inspect it because we already know the
answer -- it doesn't say that the item is clean -- and we
don't have space in the cache-entry to store those answers.
So we should always do the recursive scan.
Therefore, we should never set the flag on GITLINK cache-entries.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create unit tests to move a directory. Verify that `git status`
gives the same result with and without FSMonitor enabled.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
VFS for Git virtual repositories are incompatible with FSMonitor.
VFS for Git is a downstream fork of Git. It contains its own custom
file system watcher that is aware of the virtualization. If a working
directory is being managed by VFS for Git, we should not try to watch
it because we may get incomplete results.
We do not know anything about how VFS for Git works, but we do
know that VFS for Git working directories contain a well-defined
config setting. If it is set, mark the working directory as
incompatible.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bare repos do not have a worktree, so there is nothing for the
daemon watch.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a stress test to hammer on the fsmonitor daemon.
Create a client-side thread pool of n threads and have
each of them make m requests as fast as they can.
We do not currently inspect the contents of the response.
We're only interested in placing a heavy request load on
the daemon.
This test is useful for interactive testing and various
experimentation. For example, to place additional load
on the daemon while another test is running. We currently
do not have a test script that actually uses this helper.
We might add such a test in the future.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create some test repos with UTF8 characters in the pathname of the
root directory and verify that the builtin FSMonitor can watch them.
This test is mainly for Windows where we need to avoid `*A()`
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach FSMonitor daemon on Windows to recognize shortname paths as
aliases of normal longname paths. FSMonitor clients, such as `git
status`, should receive the longname spelling of changed files (when
possible).
Sometimes we receive FS events using the shortname, such as when a CMD
shell runs "RENAME GIT~1 FOO" or "RMDIR GIT~1". The FS notification
arrives using whatever combination of long and shortnames were used by
the other process. (Shortnames do seem to be case normalized,
however.)
Use Windows GetLongPathNameW() to try to map the pathname spelling in
the notification event into the normalized longname spelling. (This
can fail if the file/directory is deleted, moved, or renamed, because
we are asking the FS for the mapping in response to the event and
after it has already happened, but we try.)
Special case the shortname spelling of ".git" to avoid under-reporting
these events.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't bother to freshen objects stored in a cruft pack individually
by updating the `.mtimes` file. This is because we can't portably `mmap`
and write into the middle of a file (i.e., to update the mtime of just
one object). Instead, we would have to rewrite the entire `.mtimes` file
which may incur some wasted effort especially if there a lot of cruft
objects and they are freshened infrequently.
Instead, force the freshening code to avoid an optimizing write by
writing out the object loose and letting it pick up a current mtime.
This works because we prefer the mtime of the loose copy of an object
when both a loose and packed one exist (whether or not the packed copy
comes from a cruft pack or not).
This could certainly do with a test and/or be included earlier in this
series/PR, but I want to wait until after I have a chance to clean up
the overly-repetitive nature of the cruft pack tests in general.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the new `git repack --cruft` mode from `git gc` via a new opt-in
flag. When invoked like `git gc --cruft`, `git gc` will avoid exploding
unreachable objects as loose ones, and instead create a cruft pack and
`.mtimes` file.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using cruft packs, the following race can occur when a geometric
repack that writes a MIDX bitmap takes place afterwords:
- First, create an unreachable object and do an all-into-one cruft
repack which stores that object in the repository's cruft pack.
- Then make that object reachable.
- Finally, do a geometric repack and write a MIDX bitmap.
Assuming that we are sufficiently unlucky as to select a commit from the
MIDX which reaches that object for bitmapping, then the `git
multi-pack-index` process will complain that that object is missing.
The reason is because we don't include cruft packs in the MIDX when
doing a geometric repack. Since the "make that object reachable" doesn't
necessarily mean that we'll create a new copy of that object in one of
the packs that will get rolled up as part of a geometric repack, it's
possible that the MIDX won't see any copies of that now-reachable
object.
Of course, it's desirable to avoid including cruft packs in the MIDX
because it causes the MIDX to store a bunch of objects which are likely
to get thrown away. But excluding that pack does open us up to the above
race.
This patch demonstrates the bug, and resolves it by including cruft
packs in the MIDX even when doing a geometric repack.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In servers which set the pack.window configuration to a large value, we
can wind up spending quite a lot of time finding new bases when breaking
delta chains between reachable and unreachable objects while generating
a cruft pack.
Introduce a handful of `repack.cruft*` configuration variables to
control the parameters used by pack-objects when generating a cruft
pack.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose a way to split the contents of a repository into a main and cruft
pack when doing an all-into-one repack with `git repack --cruft -d`, and
a complementary configuration variable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a previous patch, pack-objects learned how to generate a cruft pack
so long as no objects are dropped.
This patch teaches pack-objects to handle the case where a non-never
`--cruft-expiration` value is passed. This case is slightly more
complicated than before, because we want pack-objects to save
unreachable objects which would have been pruned when there is another
recent (i.e., non-prunable) unreachable object which reaches the other.
We'll call these objects "unreachable but reachable-from-recent".
Here is how pack-objects handles `--cruft-expiration`:
- Instead of adding all objects outside of the kept pack(s) into the
packing list, only handle the ones whose mtime is within the grace
period.
- Construct a reachability traversal whose tips are the
unreachable-but-recent objects.
- Then, walk along that traversal, stopping if we reach an object in
the kept pack. At each step along the traversal, we add the object
we are visiting to the packing list.
In the majority of these cases, any object we visit in this traversal
will already be in our packing list. But we will sometimes encounter
reachable-from-recent cruft objects, which we want to retain even if
they aged out of the grace period.
The most subtle point of this process is that we actually don't need to
bother to update the rescued object's mtime. Even though we will write
an .mtimes file with a value that is older than the expiration window,
it will continue to survive cruft repacks so long as any objects which
reach it haven't aged out.
That is, a future repack will also exclude that object from the initial
packing list, only to discover it later on when doing the reachability
traversal.
Finally, stopping early once an object is found in a kept pack is safe
to do because the kept packs ordinarily represent which packs will
survive after repacking. Assuming that it _isn't_ safe to halt a
traversal early would mean that there is some ancestor object which is
missing, which implies repository corruption (i.e., the complete set of
reachable objects isn't present).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `pack-objects` how to generate a cruft pack when no objects are
dropped (i.e., `--cruft-expiration=never`). Later patches will teach
`pack-objects` how to generate a cruft pack that prunes objects.
When generating a cruft pack which does not prune objects, we want to
collect all unreachable objects into a single pack (noting and updating
their mtimes as we accumulate them). Ordinary use will pass the result
of a `git repack -A` as a kept pack, so when this patch says "kept
pack", readers should think "reachable objects".
Generating a non-expiring cruft packs works as follows:
- Callers provide a list of every pack they know about, and indicate
which packs are about to be removed.
- All packs which are going to be removed (we'll call these the
redundant ones) are marked as kept in-core.
Any packs the caller did not mention (but are known to the
`pack-objects` process) are also marked as kept in-core. Packs not
mentioned by the caller are assumed to be unknown to them, i.e.,
they entered the repository after the caller decided which packs
should be kept and which should be discarded.
Since we do not want to include objects in these "unknown" packs
(because we don't know which of their objects are or aren't
reachable), these are also marked as kept in-core.
- Then, we enumerate all objects in the repository, and add them to
our packing list if they do not appear in an in-core kept pack.
This results in a new cruft pack which contains all known objects that
aren't included in the kept packs. When the kept pack is the result of
`git repack -A`, the resulting pack contains all unreachable objects.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will implement and test support for writing a
cruft pack via a special mode of `git pack-objects`. To make sure that
objects are written with the correct timestamps, and a new test-tool
that can dump the object names and corresponding timestamps from a given
`.mtimes` file.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote -v" now shows the list-objects-filter used during
fetching from the remote, if available.
* ac/remote-v-with-object-list-filters:
builtin/remote.c: teach `-v` to list filters for promisor remotes
With a recent update to refuse access to repositories of other
people by default, "sudo make install" and "sudo git describe"
stopped working. This series intends to loosen it while keeping
the safety.
* cb/path-owner-check-with-sudo:
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
"git -c branch.autosetupmerge=simple branch $A $B" will set the $B
as $A's upstream only when $A and $B shares the same name, and "git
-c push.default=simple" on branch $A would push to update the
branch $A at the remote $B came from. Also more places use the
sole remote, if exists, before defaulting to 'origin'.
* tk/simple-autosetupmerge:
push: new config option "push.autoSetupRemote" supports "simple" push
push: default to single remote even when not named origin
branch: new autosetupmerge option 'simple' for matching branches
"git fetch --recurse-submodules" from multiple remotes (either from
a remote group, or "--all") used to make one extra "git fetch" in
the submodules, which has been corrected.
* jc/avoid-redundant-submodule-fetch:
fetch: do not run a redundant fetch from submodule
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
A bit of test framework fixes with a few fixes to issues found by
valgrind.
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
